[ Upstream commit cf761e3dac ]
Commit 7d5ec3d361 ("PCI/MSI: Mask all unused MSI-X entries") introduced a
readl() from ENTRY_VECTOR_CTRL before the writel() to ENTRY_DATA.
This is correct, however some hardware, like the Sun Neptune chips, the NIU
module, will cause an error and/or fatal trap if any MSIX table entry is
read before the corresponding ENTRY_DATA field is written to.
Add an optional early writel() in msix_prepare_msi_desc().
Fixes: 7d5ec3d361 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Jonathan Currier <dullfire@yahoo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241117234843.19236-2-dullfire@yahoo.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ece3e8e59 ]
The conversion of the XEN specific global variable pci_msi_ignore_mask to a
MSI domain flag, missed the facts that:
1) Legacy architectures do not provide a interrupt domain
2) Parent MSI domains do not necessarily have a domain info attached
Both cases result in an unconditional NULL pointer dereference. This was
unfortunatly missed in review and testing revealed it late.
Cure this by using the existing pci_msi_domain_supports() helper, which
handles all possible cases correctly.
Fixes: c3164d2e0d ("PCI/MSI: Convert pci_msi_ignore_mask to per MSI domain flag")
Reported-by: Daniel Gomez <da.gomez@kernel.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Daniel Gomez <da.gomez@kernel.org>
Link: https://lore.kernel.org/all/87iknwyp2o.ffs@tglx
Closes: https://lore.kernel.org/all/qn7fzggcj6qe6r6gdbwcz23pzdz2jx64aldccmsuheabhmjgrt@tawf5nfwuvw7
Stable-dep-of: cf761e3dac ("PCI/MSI: Add an option to write MSIX ENTRY_DATA before any reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3164d2e0d ]
Setting pci_msi_ignore_mask inhibits the toggling of the mask bit for both
MSI and MSI-X entries globally, regardless of the IRQ chip they are using.
Only Xen sets the pci_msi_ignore_mask when routing physical interrupts over
event channels, to prevent PCI code from attempting to toggle the maskbit,
as it's Xen that controls the bit.
However, the pci_msi_ignore_mask being global will affect devices that use
MSI interrupts but are not routing those interrupts over event channels
(not using the Xen pIRQ chip). One example is devices behind a VMD PCI
bridge. In that scenario the VMD bridge configures MSI(-X) using the
normal IRQ chip (the pIRQ one in the Xen case), and devices behind the
bridge configure the MSI entries using indexes into the VMD bridge MSI
table. The VMD bridge then demultiplexes such interrupts and delivers to
the destination device(s). Having pci_msi_ignore_mask set in that scenario
prevents (un)masking of MSI entries for devices behind the VMD bridge.
Move the signaling of no entry masking into the MSI domain flags, as that
allows setting it on a per-domain basis. Set it for the Xen MSI domain
that uses the pIRQ chip, while leaving it unset for the rest of the
cases.
Remove pci_msi_ignore_mask at once, since it was only used by Xen code, and
with Xen dropping usage the variable is unneeded.
This fixes using devices behind a VMD bridge on Xen PV hardware domains.
Albeit Devices behind a VMD bridge are not known to Xen, that doesn't mean
Linux cannot use them. By inhibiting the usage of
VMD_FEAT_CAN_BYPASS_MSI_REMAP and the removal of the pci_msi_ignore_mask
bodge devices behind a VMD bridge do work fine when use from a Linux Xen
hardware domain. That's the whole point of the series.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-ID: <20250219092059.90850-4-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: cf761e3dac ("PCI/MSI: Add an option to write MSIX ENTRY_DATA before any reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bc0b828ef6 upstream.
This reverts commit 479380efe1.
The reset_method attribute on a PCI device is only intended to manage the
availability of function scoped resets for a device. It was never intended
to restrict resets targeting the bus or slot.
In introducing a restriction that each device must support function level
reset by testing pci_reset_supported(), we essentially create a catch-22,
that a device must have a function scope reset in order to support bus/slot
reset, when we use bus/slot reset to effect a reset of a device that does
not support a function scoped reset, especially multi-function devices.
This breaks the majority of uses cases where vfio-pci uses bus/slot resets
to manage multifunction devices that do not support function scoped resets.
Fixes: 479380efe1 ("PCI: Avoid reset when disabled via sysfs")
Reported-by: Cal Peake <cp@absolutedigital.net>
Closes: https://lore.kernel.org/all/808e1111-27b7-f35b-6d5c-5b275e73677b@absolutedigital.net
Reported-by: Athul Krishna <athul.krishna.kr@protonmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220010
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250414211828.3530741-1-alex.williamson@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f09d3937d4 upstream.
The array for the iomapping cookie addresses has a length of
PCI_STD_NUM_BARS. This constant, however, only describes standard BARs;
while PCI can allow for additional, special BARs.
The total number of PCI resources is described by constant
PCI_NUM_RESOURCES, which is also used in, e.g., pci_select_bars().
Thus, the devres array has so far been too small.
Change the length of the devres array to PCI_NUM_RESOURCES.
Link: https://lore.kernel.org/r/20250312080634.13731-3-phasta@kernel.org
Fixes: bbaff68bf4 ("PCI: Add managed partial-BAR request and map infrastructure")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f2768b6a3 upstream.
If device_register(&child->dev) fails, call put_device() to explicitly
release child->dev, per the comment at device_register().
Found by code review.
Link: https://lore.kernel.org/r/20250202062357.872971-1-make24@iscas.ac.cn
Fixes: 4f535093cf ("PCI: Put pci_dev in device tree as early as possible")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3260237aa upstream.
Hot-removal of nested PCI hotplug ports suffers from a long-standing race
condition which can lead to a deadlock: A parent hotplug port acquires
pci_lock_rescan_remove(), then waits for pciehp to unbind from a child
hotplug port. Meanwhile that child hotplug port tries to acquire
pci_lock_rescan_remove() as well in order to remove its own children.
The deadlock only occurs if the parent acquires pci_lock_rescan_remove()
first, not if the child happens to acquire it first.
Several workarounds to avoid the issue have been proposed and discarded
over the years, e.g.:
https://lore.kernel.org/r/4c882e25194ba8282b78fe963fec8faae7cf23eb.1529173804.git.lukas@wunner.de/
A proper fix is being worked on, but needs more time as it is nontrivial
and necessarily intrusive.
Recent commit 9d573d1954 ("PCI: pciehp: Detect device replacement during
system sleep") provokes more frequent occurrence of the deadlock when
removing more than one Thunderbolt device during system sleep. The commit
sought to detect device replacement, but also triggered on device removal.
Differentiating reliably between replacement and removal is impossible
because pci_get_dsn() returns 0 both if the device was removed, as well as
if it was replaced with one lacking a Device Serial Number.
Avoid the more frequent occurrence of the deadlock by checking whether the
hotplug port itself was hot-removed. If so, there's no sense in checking
whether its child device was replaced.
This works because the ->resume_noirq() callback is invoked in top-down
order for the entire hierarchy: A parent hotplug port detecting device
replacement (or removal) marks all children as removed using
pci_dev_set_disconnected() and a child hotplug port can then reliably
detect being removed.
Link: https://lore.kernel.org/r/02f166e24c87d6cde4085865cce9adfdfd969688.1741674172.git.lukas@wunner.de
Fixes: 9d573d1954 ("PCI: pciehp: Detect device replacement during system sleep")
Reported-by: Kenneth Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/r/83d9302a-f743-43e4-9de2-2dd66d91ab5b@panix.com/
Reported-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Closes: https://lore.kernel.org/r/20240926125909.2362244-1-acelan.kao@canonical.com/
Tested-by: Kenneth Crudup <kenny@panix.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d66b5b3362 upstream.
Commit e49ad66781 ("PCI: j721e: Add TI J784S4 PCIe configuration")
assigned the value of .linkdown_irq_regfield for the J784S4 SoC as the
"LINK_DOWN" macro corresponding to BIT(1), and as a result, the Link
Down interrupts on J784S4 SoC are missed.
According to the Technical Reference Manual and Register Documentation
for the J784S4 SoC[1], BIT(1) corresponds to "ENABLE_SYS_EN_PCIE_DPA_1",
which is not the correct field for the link-state interrupt. Instead, it
is BIT(10) of the "PCIE_INTD_ENABLE_REG_SYS_2" register that corresponds
to the link-state field named as "ENABLE_SYS_EN_PCIE_LINK_STATE".
Thus, set .linkdown_irq_regfield to the macro "J7200_LINK_DOWN", which
expands to BIT(10) and was first defined for the J7200 SoC. Other SoCs
already reuse this macro since it accurately represents the "link-state"
field in their respective "PCIE_INTD_ENABLE_REG_SYS_2" register.
1: https://www.ti.com/lit/zip/spruj52
Fixes: e49ad66781 ("PCI: j721e: Add TI J784S4 PCIe configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[kwilczynski: commit log, add a missing .linkdown_irq_regfield member
set to the J7200_LINK_DOWN macro to struct j7200_pcie_ep_data]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250305132018.2260771-1-s-vadapalli@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2df181e1ae upstream.
A call to of_parse_phandle() is incrementing the refcount, and as such,
the of_node_put() must be called when the reference is no longer needed.
Thus, refactor the existing code and add a missing of_node_put() call
following the check to ensure that "msi_np" matches "pcie->np" and after
MSI initialization, but only if the MSI support is enabled system-wide.
Cc: stable@vger.kernel.org # v5.10+
Fixes: 40ca1bf580 ("PCI: brcmstb: Add MSI support")
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250122222955.1752778-1-svarbanov@suse.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 18056a4866 ]
The access to the PCI config space via pci_ops::read and pci_ops::write is
a low-level hardware access. The functions can be accessed with disabled
interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this
purpose.
A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be
acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in
the same context as the pci_lock.
Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with
interrupts disabled.
This was reported as:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
Call Trace:
rt_spin_lock+0x4e/0x130
vmd_pci_read+0x8d/0x100 [vmd]
pci_user_read_config_byte+0x6f/0xe0
pci_read_config+0xfe/0x290
sysfs_kf_bin_read+0x68/0x90
Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Acked-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
[bigeasy: reword commit message]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/r/20250218080830.ufw3IgyX@linutronix.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: add back report info from
https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1a7f99967 ]
Many functions in PCI use accessor macros such as pci_resource_len(),
which take a BAR index. That index, however, is never checked for
validity, potentially resulting in undefined behavior by overflowing the
array pci_dev.resource in the macro pci_resource_n().
Since many users of those macros directly assign the accessed value to
an unsigned integer, the macros cannot be changed easily anymore to
return -EINVAL for invalid indexes. Consequently, the problem has to be
mitigated in higher layers.
Add pci_bar_index_valid(). Use it where appropriate.
Link: https://lore.kernel.org/r/20250312080634.13731-4-phasta@kernel.org
Closes: https://lore.kernel.org/all/adb53b1f-29e1-3d14-0e61-351fd2d3ff0d@linux.intel.com/
Reported-by: Bingbu Cao <bingbu.cao@linux.intel.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
[kwilczynski: correct if-statement condition the pci_bar_index_is_valid()
helper function uses, tidy up code comments]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: fix typo]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f8c4959fc ]
Following a reset, a Function may respond to Config Requests with Request
Retry Status (RRS) Completion Status to indicate that it is temporarily
unable to process the Request, but will be able to process the Request in
the future (PCIe r6.0, sec 2.3.1).
If the Configuration RRS Software Visibility feature is enabled and a Root
Complex receives RRS for a config read of the Vendor ID, the Root Complex
completes the Request to the host by returning PCI_VENDOR_ID_PCI_SIG,
0x0001 (sec 2.3.2).
The Config RRS SV feature applies only to Root Ports and is not directly
related to pci_scan_bridge_extend(). Move the RRS SV enable to
set_pcie_port_type() where we handle other PCIe-specific configuration.
Link: https://lore.kernel.org/r/20250303210217.199504-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 527664f738 ]
PCIe hotplug can operate in poll mode without interrupt handlers using a
polling kthread only. eb34da60ed ("PCI: pciehp: Disable hotplug
interrupt during suspend") failed to consider that and enables HPIE
(Hot-Plug Interrupt Enable) unconditionally when resuming the Port.
Only set HPIE if non-poll mode is in use. This makes
pcie_enable_interrupt() match how pcie_enable_notification() already
handles HPIE.
Link: https://lore.kernel.org/r/20250321162114.3939-1-ilpo.jarvinen@linux.intel.com
Fixes: eb34da60ed ("PCI: pciehp: Disable hotplug interrupt during suspend")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ec19bfa78 ]
__resource_resize_store() attempts to release all resources of the device
before attempting the resize. The loop, however, only covers standard BARs
(< PCI_STD_NUM_BARS). If a device has VF BARs that are assigned,
pci_reassign_bridge_resources() finds the bridge window still has some
assigned child resources and returns -NOENT which makes
pci_resize_resource() to detect an error and abort the resize.
Change the release loop to cover all resources up to VF BARs which allows
the resize operation to release the bridge windows and attempt to assigned
them again with the different size.
If SR-IOV is enabled, disallow resize as it requires releasing also IOV
resources.
Link: https://lore.kernel.org/r/20250320142837.8027-1-ilpo.jarvinen@linux.intel.com
Fixes: 91fa127794 ("PCI: Expose PCIe Resizable BAR support via sysfs")
Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57b0302240 ]
The IRQ domain allocated for the PCIe controller is not freed if
resource_list_first_type() returns NULL, leading to a resource leak.
This fix ensures properly cleaning up the allocated IRQ domain in
the error path.
Fixes: 49e427e6bd ("Merge branch 'pci/host-probe-refactor'")
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
[kwilczynski: added missing Fixes: tag, refactored to use one of the goto labels]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250224155025.782179-2-thippeswamy.havalige@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e8d06e509 ]
This put_device() was accidentally left over from when we changed the code
from using device_register() to calling device_add(). Delete it.
Link: https://lore.kernel.org/r/55b24870-89fb-4c91-b85d-744e35db53c2@stanley.mountain
Fixes: 9885440b16 ("PCI: Fix pci_host_bridge struct device release/free handling")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 479380efe1 ]
After d88f521da3 ("PCI: Allow userspace to query and set device reset
mechanism"), userspace can disable reset of specific PCI devices by writing
an empty string to the sysfs reset_method file.
However, pci_slot_resettable() does not check pci_reset_supported(), which
means that pci_reset_function() will still reset the device even if
userspace has disabled all the reset methods.
I was able to reproduce this issue with a vfio device passed to a qemu
guest, where I had disabled PCI reset via sysfs.
Add an explicit check of pci_reset_supported() in both
pci_slot_resettable() and pci_bus_resettable() to ensure both the reset
status and reset execution are bypassed if an administrator disables it for
a device.
Link: https://lore.kernel.org/r/20250207205600.1846178-1-naravamudan@nvidia.com
Fixes: d88f521da3 ("PCI: Allow userspace to query and set device reset mechanism")
Signed-off-by: Nishanth Aravamudan <naravamudan@nvidia.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: Amey Narkhede <ameynarkhede03@gmail.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Yishai Hadas <yishaih@nvidia.com>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d7db4db19 ]
Firmware developers reported that Linux issues two PCIe hotplug commands in
very short intervals on an ARM server, which doesn't comply with the PCIe
spec. According to PCIe r6.1, sec 6.7.3.2, if the Command Completed event
is supported, software must wait for a command to complete or wait at
least 1 second before sending a new command.
In the failure case, the first PCIe hotplug command is from
get_port_device_capability(), which sends a command to disable PCIe hotplug
interrupts without waiting for its completion, and the second command comes
from pcie_enable_notification() of pciehp driver, which enables hotplug
interrupts again.
Fix this by only disabling the hotplug interrupts when the pciehp driver is
not enabled.
Link: https://lore.kernel.org/r/20250303023630.78397-1-feng.tang@linux.alibaba.com
Fixes: 2bd50dd800 ("PCI: PCIe: Disable PCIe port services during port initialization")
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7de1b60ec ]
The platform supports enabling and disabling regulators only on
ports below the Root Complex.
Thus, we need to verify this both when adding and removing the bus,
otherwise regulators may be disabled prematurely when a bus further
down the topology is removed.
Fixes: 9e6be018b2 ("PCI: brcmstb: Enable child bus device regulators from DT")
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214173944.47506-6-james.quinlan@broadcom.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3651ad5249 ]
If the regulator_bulk_get() returns an error and no regulators
are created, we need to set their number to zero.
If we don't do this and the PCIe link up fails, a call to the
regulator_bulk_free() will result in a kernel panic.
While at it, print the error value, as we cannot return an error
upwards as the kernel will WARN() on an error from add_bus().
Fixes: 9e6be018b2 ("PCI: brcmstb: Enable child bus device regulators from DT")
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250214173944.47506-5-james.quinlan@broadcom.com
[kwilczynski: commit log, use comma in the message to match style with
other similar messages]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c97321e11 ]
The driver has been mistakenly writing to a read-only (RO)
configuration space register (PCI_EXP_LNKCAP) to change the
PCIe link capability.
Although harmless in this case, the proper write destination
is an internal register that is reflected by PCI_EXP_LNKCAP.
Thus, fix the brcm_pcie_set_gen() function to correctly update
the link capability.
Fixes: c045213703 ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver")
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214173944.47506-3-james.quinlan@broadcom.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72d36589c6 ]
When the user elects to limit the PCIe generation via the appropriate
devicetree property, apply the settings before the PCIe link up, not
after.
Fixes: c045213703 ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver")
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214173944.47506-2-james.quinlan@broadcom.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ac47fbf4f ]
Per the Cadence's "PCIe Controller IP for AX14" user guide, Version
1.04, Section 9.1.7.1, "AXI Subordinate to PCIe Address Translation
Registers", Table 9.4, the bit 16 of the AXI Subordinate Address
(axi_s_awaddr) when set corresponds to MSG with data, and when not set,
to MSG without data.
However, the driver is currently doing the opposite and due to this,
the INTx is never received on the host.
So, fix the driver to reflect the documentation and also make INTx work.
Fixes: 37dddf14f1 ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller")
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214165724.184599-1-18255117159@163.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbf937dcad ]
Before 456d8aa37d ("PCI/ASPM: Disable ASPM on MFD function removal to
avoid use-after-free"), we would free the ASPM link only after the last
function on the bus pertaining to the given link was removed.
That was too late. If function 0 is removed before sibling function,
link->downstream would point to free'd memory after.
After above change, we freed the ASPM parent link state upon any function
removal on the bus pertaining to a given link.
That is too early. If the link is to a PCIe switch with MFD on the upstream
port, then removing functions other than 0 first would free a link which
still remains parent_link to the remaining downstream ports.
The resulting GPFs are especially frequent during hot-unplug, because
pciehp removes devices on the link bus in reverse order.
On that switch, function 0 is the virtual P2P bridge to the internal bus.
Free exactly when function 0 is removed -- before the parent link is
obsolete, but after all subordinate links are gone.
Link: https://lore.kernel.org/r/e12898835f25234561c9d7de4435590d957b85d9.1734924854.git.dns@arista.com
Fixes: 456d8aa37d ("PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free")
Signed-off-by: Daniel Stodden <dns@arista.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d06cc1e380 ]
Commit 566f1dd528 ("PCI: Relax bridge window tail sizing rules")
relaxed bridge window tail alignment rule for the non-optional part
(size0, no add_size/add_align). The change, however, also overwrote
add_align, which is only related to case where optional size1 related
entry is added into realloc head.
Correct this by removing the add_align overwrite.
Link: https://lore.kernel.org/r/20241216175632.4175-2-ilpo.jarvinen@linux.intel.com
Fixes: 566f1dd528 ("PCI: Relax bridge window tail sizing rules")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xiaochun Lee <lixc17@lenovo.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a596ad00f ]
7180c1d086 ("PCI: Distribute available resources for root buses, too")
breaks BAR assignment on some devices:
pci 0006:03:00.0: BAR 0 [mem 0x6300c0000000-0x6300c1ffffff 64bit pref]: assigned
pci 0006:03:00.1: BAR 0 [mem 0x6300c2000000-0x6300c3ffffff 64bit pref]: assigned
pci 0006:03:00.2: BAR 0 [mem size 0x00800000 64bit pref]: can't assign; no space
pci 0006:03:00.0: VF BAR 0 [mem size 0x02000000 64bit pref]: can't assign; no space
pci 0006:03:00.1: VF BAR 0 [mem size 0x02000000 64bit pref]: can't assign; no space
The apertures of domain 0006 before 7180c1d086:
6300c0000000-63ffffffffff : PCI Bus 0006:00
6300c0000000-6300c9ffffff : PCI Bus 0006:01
6300c0000000-6300c9ffffff : PCI Bus 0006:02 # 160MB
6300c0000000-6300c8ffffff : PCI Bus 0006:03 # 144MB
6300c0000000-6300c1ffffff : 0006:03:00.0 # 32MB
6300c2000000-6300c3ffffff : 0006:03:00.1 # 32MB
6300c4000000-6300c47fffff : 0006:03:00.2 # 8MB
6300c4800000-6300c67fffff : 0006:03:00.0 # 32MB
6300c6800000-6300c87fffff : 0006:03:00.1 # 32MB
6300c9000000-6300c9bfffff : PCI Bus 0006:04 # 12MB
6300c9000000-6300c9bfffff : PCI Bus 0006:05 # 12MB
6300c9000000-6300c91fffff : PCI Bus 0006:06 # 2MB
6300c9200000-6300c93fffff : PCI Bus 0006:07 # 2MB
6300c9400000-6300c95fffff : PCI Bus 0006:08 # 2MB
6300c9600000-6300c97fffff : PCI Bus 0006:09 # 2MB
After 7180c1d086:
6300c0000000-63ffffffffff : PCI Bus 0006:00
6300c0000000-6300c9ffffff : PCI Bus 0006:01
6300c0000000-6300c9ffffff : PCI Bus 0006:02 # 160MB
6300c0000000-6300c43fffff : PCI Bus 0006:03 # 68MB
6300c0000000-6300c1ffffff : 0006:03:00.0 # 32MB
6300c2000000-6300c3ffffff : 0006:03:00.1 # 32MB
--- no space --- : 0006:03:00.2 # 8MB
--- no space --- : 0006:03:00.0 # 32MB
--- no space --- : 0006:03:00.1 # 32MB
6300c4400000-6300c4dfffff : PCI Bus 0006:04 # 10MB
6300c4400000-6300c4dfffff : PCI Bus 0006:05 # 10MB
6300c4400000-6300c45fffff : PCI Bus 0006:06 # 2MB
6300c4600000-6300c47fffff : PCI Bus 0006:07 # 2MB
6300c4800000-6300c49fffff : PCI Bus 0006:08 # 2MB
6300c4a00000-6300c4bfffff : PCI Bus 0006:09 # 2MB
We can see that the window to 0006:03 gets shrunken too much and 0006:04
eats away the window for 0006:03:00.2.
The offending commit distributes the upstream bridge's resources multiple
times to every downstream bridge, hence makes the aperture smaller than
desired because calculation of io_per_b, mmio_per_b and mmio_pref_per_b
becomes incorrect.
Instead, distribute downstream bridges' own resources to resolve the issue.
Link: https://lore.kernel.org/r/20241204022457.51322-1-kaihengf@nvidia.com
Fixes: 7180c1d086 ("PCI: Distribute available resources for root buses, too")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219540
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Carol Soto <csoto@nvidia.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d555ed45a5 ]
pcim_intx() tries to restore the INTx bit at removal via devres, but there
is a chance that it restores a wrong value.
Because the value to be restored is blindly assumed to be the negative of
the enable argument, when a driver calls pcim_intx() unnecessarily for the
already enabled state, it'll restore to the disabled state in turn. That
is, the function assumes the case like:
// INTx == 1
pcim_intx(pdev, 0); // old INTx value assumed to be 1 -> correct
but it might be like the following, too:
// INTx == 0
pcim_intx(pdev, 0); // old INTx value assumed to be 1 -> wrong
Also, when a driver calls pcim_intx() multiple times with different enable
argument values, the last one will win no matter what value it is. This
can lead to inconsistency, e.g.
// INTx == 1
pcim_intx(pdev, 0); // OK
...
pcim_intx(pdev, 1); // now old INTx wrongly assumed to be 0
This patch addresses those inconsistencies by saving the original INTx
state at the first pcim_intx() call. For that, get_or_create_intx_devres()
is folded into pcim_intx() caller side; it allows us to simply check the
already allocated devres and record the original INTx along with the
devres_alloc() call.
Link: https://lore.kernel.org/r/20241031134300.10296-1-tiwai@suse.de
Fixes: 25216afc9d ("PCI: Add managed pcim_intx()")
Link: https://lore.kernel.org/87v7xk2ps5.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Philipp Stanner <pstanner@redhat.com>
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfa2f4d5f9 ]
pci_intx() is a hybrid function which can sometimes be managed through
devres. This hybrid nature is undesirable.
Since all users of pci_intx() have by now been ported either to
always-managed pcim_intx() or never-managed pci_intx_unmanaged(), the
devres functionality can be removed from pci_intx().
Consequently, pci_intx_unmanaged() is now redundant, because pci_intx()
itself is now unmanaged.
Remove the devres functionality from pci_intx(). Have all users of
pci_intx_unmanaged() call pci_intx(). Remove pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-13-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: d555ed45a5 ("PCI: Restore original INTX_DISABLE bit by pcim_intx()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f546e8033d ]
pci_intx() is a hybrid function which sometimes performs devres operations,
depending on whether pcim_enable_device() has been used to enable the
pci_dev. This sometimes-managed nature of the function is problematic.
Notably, it causes the function to allocate under some circumstances which
makes it unusable from interrupt context.
Export pcim_intx() (which is always managed) and rename __pcim_intx()
(which is never managed) to pci_intx_unmanaged() and export it as well.
Then all callers of pci_intx() can be ported to the version they need,
depending whether they use pci_enable_device() or pcim_enable_device().
Link: https://lore.kernel.org/r/20241209130632.132074-3-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Stable-dep-of: d555ed45a5 ("PCI: Restore original INTX_DISABLE bit by pcim_intx()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9d959c36b ]
In order to remove the deprecated function
pcim_iomap_regions_request_all(), a few drivers need an interface to
request all BARs a PCI device offers.
Make pcim_request_all_regions() a public interface.
Link: https://lore.kernel.org/r/20241030112743.104395-2-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: d555ed45a5 ("PCI: Restore original INTX_DISABLE bit by pcim_intx()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 81f64e925c upstream.
The Mediatek MT7922 WiFi device advertises FLR support, but it apparently
does not work, and all subsequent config reads return ~0:
pci 0000:01:00.0: [14c3:0616] type 00 class 0x028000 PCIe Endpoint
pciback 0000:01:00.0: not ready 65535ms after FLR; giving up
After an FLR, pci_dev_wait() waits for the device to become ready. Prior
to d591f6804e ("PCI: Wait for device readiness with Configuration RRS"),
it polls PCI_COMMAND until it is something other that PCI_POSSIBLE_ERROR
(~0). If it times out, pci_dev_wait() returns -ENOTTY and
__pci_reset_function_locked() tries the next available reset method.
Typically this is Secondary Bus Reset, which does work, so the MT7922 is
eventually usable.
After d591f6804e, if Configuration Request Retry Status Software
Visibility (RRS SV) is enabled, pci_dev_wait() polls PCI_VENDOR_ID until it
is something other than the special 0x0001 Vendor ID that indicates a
completion with RRS status.
When RRS SV is enabled, reads of PCI_VENDOR_ID should return either 0x0001,
i.e., the config read was completed with RRS, or a valid Vendor ID. On the
MT7922, it seems that all config reads after FLR return ~0 indefinitely.
When pci_dev_wait() reads PCI_VENDOR_ID and gets 0xffff, it assumes that's
a valid Vendor ID and the device is now ready, so it returns with success.
After pci_dev_wait() returns success, we restore config space and continue.
Since the MT7922 is not actually ready after the FLR, the restore fails and
the device is unusable.
We considered changing pci_dev_wait() to continue polling if a
PCI_VENDOR_ID read returns either 0x0001 or 0xffff. This "works" as it did
before d591f6804e, although we have to wait for the timeout and then fall
back to SBR. But it doesn't work for SR-IOV VFs, which *always* return
0xffff as the Vendor ID.
Mark Mediatek MT7922 WiFi devices to avoid the use of FLR completely. This
will cause fallback to another reset method, such as SBR.
Link: https://lore.kernel.org/r/20250212193516.88741-1-helgaas@kernel.org
Fixes: d591f6804e ("PCI: Wait for device readiness with Configuration RRS")
Link: https://github.com/QubesOS/qubes-issues/issues/9689#issuecomment-2582927149
Link: https://lore.kernel.org/r/Z4pHll_6GX7OUBzQ@mail-itl
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a3282f84b2 ]
Add Microchip parts to the Device ID table so the driver supports PCI100x
devices.
Add a new macro to quirk the Microchip Switchtec PCI100x parts to allow DMA
access via NTB to work when the IOMMU is turned on.
PCI100x family has 6 variants; each variant is designed for different
application usages, different port counts and lane counts:
PCI1001 has 1 x4 upstream port and 3 x4 downstream ports
PCI1002 has 1 x4 upstream port and 4 x2 downstream ports
PCI1003 has 2 x4 upstream ports, 2 x2 upstream ports, and 2 x2
downstream ports
PCI1004 has 4 x4 upstream ports
PCI1005 has 1 x4 upstream port and 6 x2 downstream ports
PCI1006 has 6 x2 upstream ports and 2 x2 downstream ports
[Historical note: these parts use PCI_VENDOR_ID_EFAR (0x1055), from EFAR
Microsystems, which was acquired in 1996 by Standard Microsystems Corp,
which was acquired by Microchip Technology in 2012. The PCI-SIG confirms
that Vendor ID 0x1055 is assigned to Microchip even though it's not
visible via https://pcisig.com/membership/member-companies]
Link: https://lore.kernel.org/r/20250120095524.243103-1-Saladi.Rakeshbabu@microchip.com
Signed-off-by: Rakesh Babu Saladi <Saladi.Rakeshbabu@microchip.com>
[bhelgaas: Vendor ID history]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-By: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b198499c7d ]
Apparently the Raptor Lake-P reference firmware configures the PIO log size
correctly, but some vendor BIOSes, including at least ASUSTeK COMPUTER INC.
Zenbook UX3402VA_UX3402VA, do not.
Apply the quirk for Raptor Lake-P. This prevents kernel complaints like:
DPC: RP PIO log size 0 is invalid
and also enables the DPC driver to dump the RP PIO Log registers when DPC
is triggered.
Note that the bug report also mentions 8086:a76e, which has been already
added by 627c6db207 ("PCI/DPC: Quirk PIO log size for Intel Raptor Lake
Root Ports").
Link: https://lore.kernel.org/r/20250102164315.7562-1-tiwai@suse.de
Link: https://bugzilla.suse.com/show_bug.cgi?id=1234623
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3708acbd5f upstream.
In commit 4284c88fff ("PCI: designware-ep: Allow pci_epc_set_bar() update
inbound map address") set_bar() was modified to support dynamically
changing the backing physical address of a BAR that was already configured.
This means that set_bar() can be called twice, without ever calling
clear_bar() (as calling clear_bar() would clear the BAR's PCI address
assigned by the host).
This can only be done if the new BAR size/flags does not differ from the
existing BAR configuration. Add these missing checks.
If we allow set_bar() to set e.g. a new BAR size that differs from the
existing BAR size, the new address translation range will be smaller than
the BAR size already determined by the host, which would mean that a read
past the new BAR size would pass the iATU untranslated, which could allow
the host to read memory not belonging to the new struct pci_epf_bar.
While at it, add comments which clarifies the support for dynamically
changing the physical address of a BAR. (Which was also missing.)
Fixes: 4284c88fff ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address")
Link: https://lore.kernel.org/r/20241213143301.4158431-10-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33a6938e0c upstream.
The "DesignWare Cores PCI Express Controller Register Descriptions,
Version 4.60a", section "1.21.70 IATU_LWR_TARGET_ADDR_OFF_INBOUND_i",
fields LWR_TARGET_RW and LWR_TARGET_HW both state that:
"Field size depends on log2(BAR_MASK+1) in BAR match mode."
I.e. only the upper bits are writable, and the number of writable bits is
dependent on the configured BAR_MASK.
If we do not write the BAR_MASK before writing the iATU registers, we are
relying the reset value of the BAR_MASK being larger than the requested
BAR size (which is supplied in the struct pci_epf_bar which is passed to
pci_epc_set_bar()). The reset value of the BAR_MASK is SoC dependent.
Thus, if the struct pci_epf_bar requests a BAR size that is larger than the
reset value of the BAR_MASK, the iATU will try to write to read-only bits,
which will cause the iATU to end up redirecting to a physical address that
is different from the address that was intended.
Thus, we should always write the iATU registers after writing the BAR_MASK.
Fixes: f8aed6ec62 ("PCI: dwc: designware: Add EP mode support")
Link: https://lore.kernel.org/r/20241213143301.4158431-9-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1390a33b3d ]
On Microchip PolarFire SoC the PCIe Root Port can be behind one of three
general purpose Fabric Interface Controller (FIC) buses that encapsulates
an AXI-S bus. Depending on which FIC(s) the Root Port is connected through
to CPU space, and what address translation is done by that FIC, the Root
Port driver's inbound address translation may vary.
For all current supported designs and all future expected designs, inbound
address translation done by a FIC on PolarFire SoC varies depending on
whether PolarFire SoC is operating in coherent DMA mode or noncoherent DMA
mode.
The setup of the outbound address translation tables in the Root Port
driver only needs to handle these two cases.
Setup the inbound address translation tables to one of two address
translations, depending on whether the Root Port is being used with
coherent DMA or noncoherent DMA.
Link: https://lore.kernel.org/r/20241011140043.1250030-3-daire.mcnamara@microchip.com
Fixes: 6f15a9c9f9 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
[bhelgaas: adapt for ac7f53b7e7 ("PCI: microchip: Add support for using
either Root Port 1 or 2")]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac7f53b7e7 ]
The PCI host controller on PolarFire SoC has multiple Root Port instances,
each with their own bridge and ctrl address spaces. The original binding
has an "apb" register region, and it is expected to be set to the base
address of the Root Complex register space. Some defines in the Linux
driver were used to compute the addresses of the bridge and ctrl address
ranges corresponding to Root Port instance 1. Some customers want to use
Root Port instance 2 however, which requires changing the defines in the
driver, which is clearly not a portable solution.
The binding has been changed from a single register region to a pair,
corresponding to the bridge and ctrl regions respectively, so modify the
driver to read these regions directly from the devicetree rather than
compute them from the base address of the abp region.
To maintain backwards compatibility with the existing binding, the driver
retains code to handle the "abp" reg and computes the base address of the
bridge and ctrl regions using the defines if it is present. reg-names has
always been a required property, so this is safe to do.
Link: https://lore.kernel.org/r/20241107-surrender-brisket-287d563a5de1@spud
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
[bhelgaas: Capitalize PCIe spec terms]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Stable-dep-of: 1390a33b3d ("PCI: microchip: Set inbound address translation for coherent or non-coherent mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 235c2b197a ]
Currently, if DMA MEMCPY test is requested by the host, and if the endpoint
DMA controller supports DMA_PRIVATE, the test will fail. This is not
correct since there is no check for DMA_MEMCPY capability and the DMA
controller can support both DMA_PRIVATE and DMA_MEMCPY.
Fix the check and also reword the error message.
Link: https://lore.kernel.org/r/20250116171650.33585-2-manivannan.sadhasivam@linaro.org
Fixes: 8353813c88 ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Reported-by: Niklas Cassel <cassel@kernel.org>
Closes: https://lore.kernel.org/linux-pci/Z3QtEihbiKIGogWA@ryzen
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86a016e278 ]
On the i.MX8QM, PCIe link can't be re-established again in
dw_pcie_resume_noirq(), if the LTSSM_EN bit is not cleared
properly in dw_pcie_suspend_noirq().
So, add dw_pcie_stop_link() to dw_pcie_suspend_noirq() to fix
this issue and to align the suspend/resume functions since there
is dw_pcie_start_link() in dw_pcie_resume_noirq() already.
Fixes: 4774faf854 ("PCI: dwc: Implement generic suspend/resume functionality")
Link: https://lore.kernel.org/r/20241210081557.163555-2-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0639013d3 ]
4581403f67 ("PCI: qcom: Enumerate endpoints based on Link up event in
'global_irq' interrupt") added the Link Up-based enumeration support, but
did not update the ICC/OPP vote once link is up. Before that, the update
happened during probe and the endpoints may or may not be enumerated at
that time, so the ICC/OPP vote was not guaranteed to be accurate.
With Link Up-based enumeration support, the driver can request the accurate
vote based on the PCIe link.
Call qcom_pcie_icc_opp_update() in qcom_pcie_global_irq_thread() after
enumerating the endpoints.
Fixes: 4581403f67 ("PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt")
Link: https://lore.kernel.org/r/20241123-remove_wait2-v5-3-b5f9e6b794c2@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93d883f890 ]
Ensure the *_enable_ref_clk() function is symmetric by addressing missing
disable parts on some platforms.
Fixes: d0a75c791f ("PCI: imx6: Factor out ref clock disable to match enable")
Link: https://lore.kernel.org/r/20241126075702.4099164-7-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef61c7d8d0 ]
Since the apps_reset is asserted in imx_pcie_assert_core_reset(), it should
be deasserted in imx_pcie_deassert_core_reset().
Fixes: 9b3fe6796d ("PCI: imx6: Add code to support i.MX7D")
Link: https://lore.kernel.org/r/20241126075702.4099164-6-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f068ffdd03 ]
The i.MX7D only has one PCIe controller, so controller_id should always be
0. The previous code is incorrect although yielding the correct result.
Fix by removing "IMX7D" from the switch case branch.
Fixes: 2d8ed461db ("PCI: imx6: Add support for i.MX8MQ")
Link: https://lore.kernel.org/r/20241126075702.4099164-5-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
