commit 0d7597749f upstream.
When KCOV or GCOV is enabled, dead code can be left behind, in which
case objtool silences unreachable and undefined behavior (fallthrough)
warnings.
Fallthrough warnings, and their variant "end of section" warnings, were
silenced with the following commit:
6b023c7842 ("objtool: Silence more KCOV warnings")
Another variant of a fallthrough warning is a jump to the end of a
function. If that function happens to be at the end of a section, the
jump destination doesn't actually exist.
Normally that would be a fatal objtool error, but for KCOV/GCOV it's
just another undefined behavior fallthrough. Silence it like the
others.
Fixes the following warning:
drivers/iommu/dma-iommu.o: warning: objtool: iommu_dma_sw_msi+0x92: can't find jump dest instruction at .text+0x54d5
Fixes: 6b023c7842 ("objtool: Silence more KCOV warnings")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/08fbe7d7e1e20612206f1df253077b94f178d93e.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/314f8809-cd59-479b-97d7-49356bf1c8d1@infradead.org/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7f2188d68 upstream.
The function bpf_test_init() now returns an error if user_size
(.data_size_in) is less than ETH_HLEN, causing the tests to
fail. Adjust the data size to ensure it meets the requirement of
ETH_HLEN.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250121150643.671650-2-syoshida@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 972bafed67 ("bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d124d984c8 upstream.
xdp_cpumap_attach, in its current form, only checks that an xdp cpumap
program can be executed, but not that it performs correctly the cpu
redirect as configured by userspace (bpf_prog_test_run_opts will return
success even if the redirect program returns an error)
Add a check to ensure that the program performs the configured redirect
as well. The check is based on a global variable incremented by a
chained program executed only if the redirect program properly executes.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241009-convert_xdp_tests-v3-3-51cea913710c@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5fbcf46ee upstream.
Current test only checks attach/detach on cpu map type program, and so
does not check that it can be properly executed, neither that it
redirects correctly.
Update the existing test to extend its coverage:
- keep the redirected program loaded
- try to execute it through bpf_prog_test_run_opts with some dummy
context
While at it, bring the following minor improvements:
- isolate test interface in its own namespace
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241009-convert_xdp_tests-v3-2-51cea913710c@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: c7f2188d68 ("selftests/bpf: Adjust data size to have ETH_HLEN")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac8d16b2d3 upstream.
xdp_redir_prog currently redirects packets based on the entry at index 1
in cpu_map, but the corresponding test only manipulates the entry at
index 0. This does not really affect the test in its current form since
the program is detached before having the opportunity to execute, but it
needs to be fixed before being able improve the corresponding test (ie,
not only test attach/detach but also the redirect feature)
Fix this XDP program by making it redirect packets based on entry 0 in
cpu_map instead of entry 1.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241009-convert_xdp_tests-v3-1-51cea913710c@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 197c1eaa7b ]
When running the mincore_selftest on a system with an XFS file system, it
failed the "check_file_mmap" test case due to the read-ahead pages reaching
the end of the file. The failure log is as below:
RUN global.check_file_mmap ...
mincore_selftest.c:264:check_file_mmap:Expected i (1024) < vec_size (1024)
mincore_selftest.c:265:check_file_mmap:Read-ahead pages reached the end of the file
check_file_mmap: Test failed
FAIL global.check_file_mmap
This is because the read-ahead window size of the XFS file system on this
machine is 4 MB, which is larger than the size from the #PF address to the
end of the file. As a result, all the pages for this file are populated.
blockdev --getra /dev/nvme0n1p5
8192
blockdev --getbsz /dev/nvme0n1p5
512
This issue can be fixed by extending the current FILE_SIZE 4MB to a larger
number, but it will still fail if the read-ahead window size of the file
system is larger enough. Additionally, in the real world, read-ahead pages
reaching the end of the file can happen and is an expected behavior.
Therefore, allowing read-ahead pages to reach the end of the file is a
better choice for the "check_file_mmap" test case.
Link: https://lore.kernel.org/r/20250311080940.21413-1-qiuxu.zhuo@intel.com
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72070e57b0 ]
Commit 57ed58c132 ("selftests: ublk: enable zero copy for stripe target")
added test entry of test_stripe_04, but forgot to add the test script.
So fix the test by adding the script file.
Reported-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250404001849.1443064-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b023c7842 ]
In the past there were issues with KCOV triggering unreachable
instruction warnings, which is why unreachable warnings are now disabled
with CONFIG_KCOV.
Now some new KCOV warnings are showing up with GCC 14:
vmlinux.o: warning: objtool: cpuset_write_resmask() falls through to next function cpuset_update_active_cpus.cold()
drivers/usb/core/driver.o: error: objtool: usb_deregister() falls through to next function usb_match_device()
sound/soc/codecs/snd-soc-wcd934x.o: warning: objtool: .text.wcd934x_slim_irq_handler: unexpected end of section
All are caused by GCC KCOV not finishing an optimization, leaving behind
a never-taken conditional branch to a basic block which falls through to
the next function (or end of section).
At a high level this is similar to the unreachable warnings mentioned
above, in that KCOV isn't fully removing dead code. Treat it the same
way by adding these to the list of warnings to ignore with CONFIG_KCOV.
Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/66a61a0b65d74e072d3dc02384e395edb2adc3c5.1742852846.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/Z9iTsI09AEBlxlHC@gmail.com
Closes: https://lore.kernel.org/oe-kbuild-all/202503180044.oH9gyPeg-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02a4694107 ]
We are missing setting error code in do_loader() when
bpf_object__open_file() fails. This means the command's exit status code
will be successful, even though the operation failed. So make sure to
return the correct error code. To maintain consistency with other
locations where bpf_object__open_file() is called, return -1.
[0] Closes: https://github.com/libbpf/bpftool/issues/156
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sewon Nam <swnam0729@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Quentin Monnet <qmo@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/d3b5b4b4-19bb-4619-b4dd-86c958c4a367@stanley.mountain/t/#u
Link: https://lore.kernel.org/bpf/20250311031238.14865-1-swnam0729@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b99f27e902 ]
Fix a race condition between the main test_progs thread and the traffic
monitoring thread. The traffic monitor thread tries to print a line
using multiple printf and use flockfile() to prevent the line from being
torn apart. Meanwhile, the main thread doing io redirection can reassign
or close stdout when going through tests. A deadlock as shown below can
happen.
main traffic_monitor_thread
==== ======================
show_transport()
-> flockfile(stdout)
stdio_hijack_init()
-> stdout = open_memstream(log_buf, log_cnt);
...
env.subtest_state->stdout_saved = stdout;
...
funlockfile(stdout)
stdio_restore_cleanup()
-> fclose(env.subtest_state->stdout_saved);
After the traffic monitor thread lock stdout, A new memstream can be
assigned to stdout by the main thread. Therefore, the traffic monitor
thread later will not be able to unlock the original stdout. As the
main thread tries to access the old stdout, it will hang indefinitely
as it is still locked by the traffic monitor thread.
The deadlock can be reproduced by running test_progs repeatedly with
traffic monitor enabled:
for ((i=1;i<=100;i++)); do
./test_progs -a flow_dissector_skb* -m '*'
done
Fix this by only calling printf once and remove flockfile()/funlockfile().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250213233217.553258-1-ameryhung@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 85fd85bc02 upstream.
insn_decoder_test found a problem with decoding APX CTEST instructions:
Found an x86 instruction decoder bug, please report this.
ffffffff810021df 62 54 94 05 85 ff ctestneq
objdump says 6 bytes, but insn_get_length() says 5
It happens because x86-opcode-map.txt doesn't specify arguments for the
instruction and the decoder doesn't expect to see ModRM byte.
Fixes: 690ca3a306 ("x86/insn: Add support for APX EVEX instructions to the opcode map")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v6.10+
Link: https://lore.kernel.org/r/20250423065815.2003231-1-kirill.shutemov@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04789af756 upstream.
Extend changes_pkt_data tests with test cases freplacing the main
program that does not have subprograms. Try four combinations when
both main program and replacement do and do not change packet data.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241212070711.427443-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9706b56e1 upstream.
Add a test case with a tail call done from a global sub-program. Such
tails calls should be considered as invalidating packet pointers.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89ff40890d upstream.
Try different combinations of global functions replacement:
- replace function that changes packet data with one that doesn't;
- replace function that changes packet data with one that does;
- replace function that doesn't change packet data with one that does;
- replace function that doesn't change packet data with one that doesn't;
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c02223e2d upstream.
Currently if the filesystem for the cgroups version it wants to use is not
mounted charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh tests
will attempt to mount it on the hard coded path /dev/cgroup/memory,
deleting that directory when the test finishes. This will fail if there
is not a preexisting directory at that path, and since the directory is
deleted subsequent runs of the test will fail. Instead of relying on this
hard coded directory name use mktemp to generate a temporary directory to
use as a mountpoint, fixing both the assumption and the disruption caused
by deleting a preexisting directory.
This means that if the relevant cgroup filesystem is not already mounted
then we rely on having coreutils (which provides mktemp) installed. I
suspect that many current users are relying on having things automounted
by default, and given that the script relies on bash it's probably not an
unreasonable requirement.
Link: https://lkml.kernel.org/r/20250404-kselftest-mm-cgroup2-detection-v1-1-3dba6d32ba8c@kernel.org
Fixes: 209376ed2a ("selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup setting")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3cd5f507b upstream.
Starting with Rust 1.86.0 (see upstream commit b151b513ba2b ("Insert null
checks for pointer dereferences when debug assertions are enabled") [1]),
under some kernel configurations with `CONFIG_RUST_DEBUG_ASSERTIONS=y`,
one may trigger a new `objtool` warning:
rust/kernel.o: warning: objtool: _R..._6kernel9workqueue6system()
falls through to next function _R...9workqueue14system_highpri()
due to a call to the `noreturn` symbol:
core::panicking::panic_null_pointer_dereference
Thus add it to the list so that `objtool` knows it is actually `noreturn`.
See commit 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Fixes: 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
Link: b151b513ba [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250413002338.1741593-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b26c1a85f3 ]
The default SH kunit configuration sets CONFIG_CMDLINE_OVERWRITE which
completely disregards the cmdline passed from the bootloader/QEMU in favor
of the builtin CONFIG_CMDLINE.
However the kunit tool needs to pass arguments to the in-kernel kunit core,
for filters and other runtime parameters.
Enable CONFIG_CMDLINE_EXTEND instead, so kunit arguments are respected.
Link: https://lore.kernel.org/r/20250407-kunit-sh-v1-1-f5432a54cf2f@linutronix.de
Fixes: 8110a3cab0 ("kunit: tool: Add support for SH under QEMU")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a30951d09c ]
On 32-bit, we can't use %lu to print a size_t variable and gcc warns us
about it. Shame it doesn't warn about it on 64-bit.
Link: https://lkml.kernel.org/r/20250403003311.359917-1-Liam.Howlett@oracle.com
Fixes: cc86e0c2f3 ("radix tree test suite: add support for slab bulk APIs")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7f4ec77f3f upstream.
Initialize 'new_off' and 'pad_bits' to 0 and 'pad_type' to NULL in
btf_dump_emit_bit_padding to prevent compiler warnings/errors which are
observed when compiling with 'EXTRA_CFLAGS=-g -Og' options, but do not
happen when compiling with current default options.
For example, when compiling libbpf with
$ make "EXTRA_CFLAGS=-g -Og" -C tools/lib/bpf/ clean all
Clang version 17.0.6 and GCC 13.3.1 fail to compile btf_dump.c due to
following errors:
btf_dump.c: In function ‘btf_dump_emit_bit_padding’:
btf_dump.c:903:42: error: ‘new_off’ may be used uninitialized [-Werror=maybe-uninitialized]
903 | if (new_off > cur_off && new_off <= next_off) {
| ~~~~~~~~^~~~~~~~~~~
btf_dump.c:870:13: note: ‘new_off’ was declared here
870 | int new_off, pad_bits, bits, i;
| ^~~~~~~
btf_dump.c:917:25: error: ‘pad_type’ may be used uninitialized [-Werror=maybe-uninitialized]
917 | btf_dump_printf(d, "\n%s%s: %d;", pfx(lvl), pad_type,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
918 | in_bitfield ? new_off - cur_off : 0);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
btf_dump.c:871:21: note: ‘pad_type’ was declared here
871 | const char *pad_type;
| ^~~~~~~~
btf_dump.c:930:20: error: ‘pad_bits’ may be used uninitialized [-Werror=maybe-uninitialized]
930 | if (bits == pad_bits) {
| ^
btf_dump.c:870:22: note: ‘pad_bits’ was declared here
870 | int new_off, pad_bits, bits, i;
| ^~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20241022172329.3871958-3-ezulian@redhat.com
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7335d4ac81 upstream.
Fix a bug where the code was checking the wrong file descriptors
when opening the input files. The code was checking 'fd' instead
of 'fd_in', which could lead to incorrect error handling.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Fixes: ca7ae89160 ("selftests: mptcp: mptfo Initiator/Listener")
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-2-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c183165f87 upstream.
The file descriptor 'fd_in' is opened when cfg_input is configured, but
not closed in main_loop(), this patch fixes it.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Co-developed-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-3-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5efa393d8 upstream.
The new signal_scoping_thread_setuid tests check that the libc's
setuid() function works as expected even when a thread is sandboxed with
scoped signal restrictions.
Before the signal scoping fix, this test would have failed with the
setuid() call:
[pid 65] getpid() = 65
[pid 65] tgkill(65, 66, SIGRT_1) = -1 EPERM (Operation not permitted)
[pid 65] futex(0x40a66cdc, FUTEX_WAKE_PRIVATE, 1) = 0
[pid 65] setuid(1001) = 0
After the fix, tgkill(2) is successfully leveraged to synchronize
credentials update across threads:
[pid 65] getpid() = 65
[pid 65] tgkill(65, 66, SIGRT_1) = 0
[pid 66] <... read resumed>0x40a65eb7, 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
[pid 66] --- SIGRT_1 {si_signo=SIGRT_1, si_code=SI_TKILL, si_pid=65, si_uid=1000} ---
[pid 66] getpid() = 65
[pid 66] setuid(1001) = 0
[pid 66] futex(0x40a66cdc, FUTEX_WAKE_PRIVATE, 1) = 0
[pid 66] rt_sigreturn({mask=[]}) = 0
[pid 66] read(3, <unfinished ...>
[pid 65] setuid(1001) = 0
Test coverage for security/landlock is 92.9% of 1137 lines according to
gcc/gcov-14.
Fixes: c899496501 ("selftests/landlock: Test signal scoping for threads")
Cc: Günther Noack <gnoack@google.com>
Cc: Tahera Fahimi <fahimitahera@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-8-mic@digikod.net
[mic: Update test coverage]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18eb75f3af upstream.
Because Linux credentials are managed per thread, user space relies on
some hack to synchronize credential update across threads from the same
process. This is required by the Native POSIX Threads Library and
implemented by set*id(2) wrappers and libcap(3) to use tgkill(2) to
synchronize threads. See nptl(7) and libpsx(3). Furthermore, some
runtimes like Go do not enable developers to have control over threads
[1].
To avoid potential issues, and because threads are not security
boundaries, let's relax the Landlock (optional) signal scoping to always
allow signals sent between threads of the same process. This exception
is similar to the __ptrace_may_access() one.
hook_file_set_fowner() now checks if the target task is part of the same
process as the caller. If this is the case, then the related signal
triggered by the socket will always be allowed.
Scoping of abstract UNIX sockets is not changed because kernel objects
(e.g. sockets) should be tied to their creator's domain at creation
time.
Note that creating one Landlock domain per thread puts each of these
threads (and their future children) in their own scope, which is
probably not what users expect, especially in Go where we do not control
threads. However, being able to drop permissions on all threads should
not be restricted by signal scoping. We are working on a way to make it
possible to atomically restrict all threads of a process with the same
domain [2].
Add erratum for signal scoping.
Closes: https://github.com/landlock-lsm/go-landlock/issues/36
Fixes: 54a6e6bbf3 ("landlock: Add signal scoping")
Fixes: c899496501 ("selftests/landlock: Test signal scoping for threads")
Depends-on: 26f204380a ("fs: Fix file_set_fowner LSM hook inconsistencies")
Link: https://pkg.go.dev/kernel.org/pub/linux/libs/security/libcap/psx [1]
Link: https://github.com/landlock-lsm/linux/issues/2 [2]
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Tahera Fahimi <fahimitahera@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20250318161443.279194-6-mic@digikod.net
[mic: Add extra pointer check and RCU guard, and ease backport]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15383a0d63 upstream.
Some fixes may require user space to check if they are applied on the
running kernel before using a specific feature. For instance, this
applies when a restriction was previously too restrictive and is now
getting relaxed (e.g. for compatibility reasons). However, non-visible
changes for legitimate use (e.g. security fixes) do not require an
erratum.
Because fixes are backported down to a specific Landlock ABI, we need a
way to avoid cherry-pick conflicts. The solution is to only update a
file related to the lower ABI impacted by this issue. All the ABI files
are then used to create a bitmask of fixes.
The new errata interface is similar to the one used to get the supported
Landlock ABI version, but it returns a bitmask instead because the order
of fixes may not match the order of versions, and not all fixes may
apply to all versions.
The actual errata will come with dedicated commits. The description is
not actually used in the code but serves as documentation.
Create the landlock_abi_version symbol and use its value to check errata
consistency.
Update test_base's create_ruleset_checks_ordering tests and add errata
tests.
This commit is backportable down to the first version of Landlock.
Fixes: 3532b0b435 ("landlock: Enable user space to infer supported features")
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 208baa3ec9 ]
If malloc returns NULL due to low memory, 'config' pointer can be NULL.
Add a check to prevent NULL dereference.
Link: https://lore.kernel.org/r/20250219122715.3892223-1-quic_zhonhan@quicinc.com
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8df7d0ef9 ]
The !CONFIG_IA32_EMULATION version of xen_entry_SYSCALL_compat() ends
with a SYSCALL instruction which is classified by objtool as
INSN_CONTEXT_SWITCH.
Unlike validate_branch(), validate_unret() doesn't consider
INSN_CONTEXT_SWITCH in a non-function to be a dead end, so it keeps
going past the end of xen_entry_SYSCALL_compat(), resulting in the
following warning:
vmlinux.o: warning: objtool: xen_reschedule_interrupt+0x2a: RET before UNTRAIN
Fix that by adding INSN_CONTEXT_SWITCH handling to validate_unret() to
match what validate_branch() is already doing.
Fixes: a09a6e2399 ("objtool: Add entry UNRET validation")
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/f5eda46fd09f15b1f5cde3d9ae3b92b958342add.1744095216.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d50e00fef ]
Testcase should fail if -EWOULDBLOCK is not returned when expected value
differs from actual value from the waiter.
Link: https://lore.kernel.org/r/20250404221225.1596324-1-edliaw@google.com
Fixes: 9d57f7c797 ("selftests: futex: Test sys_futex_waitv() wouldblock")
Signed-off-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f729775f79 ]
The CoreThr column displays total thermal throttling events
since boot time.
Change it to report events during the measurement interval.
This is more useful for showing a user the current conditions.
Total events since boot time are still available to the user via
/sys/devices/system/cpu/cpu*/thermal_throttle/*
Document CoreThr on turbostat.8
Fixes: eae97e053f ("turbostat: Support thermal throttle count print")
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c21b02fd9c ]
These scripts fail if the kernel is tainted which leads to wrong test
failure reports in CI environments when an unrelated test triggers some
splat.
Check taint state at start of script and SKIP if its already dodgy.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35d13f841a ]
The previous change to support cgroup filters introduced a bug that
pathname can include commas. It confused the lexer to treat an item and
the trailing comma as a single token. And it resulted in a parse error:
$ sudo perf record -e cycles:P --filter 'period > 0, ip > 64' -- true
perf_bpf_filter: Error: Unexpected item: 0,
perf_bpf_filter: syntax error, unexpected BFT_ERROR, expecting BFT_NUM
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--filter <filter>
event filter
It should get "0" and "," separately.
An easiest fix would be to remove "," from the possible pathname
characters. As it's for cgroup names, probably ok to assume it won't
have commas in the pathname.
I found that the existing BPF filtering test didn't have any complex
filter condition with commas. Let's update the group filter test which
is supposed to test filter combinations like this.
Link: https://lore.kernel.org/r/20250307220922.434319-1-namhyung@kernel.org
Fixes: 91e88437d5 ("perf bpf-filter: Support filtering on cgroups")
Reported-by: Sally Shi <sshii@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a352a90e8 ]
Annotate so it is built with non-executable stack.
Fixes: 8b97519711 ("perf test: Add asm pureloop test tool")
Signed-off-by: Marcus Meissner <meissner@suse.de>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250323085410.23751-1-meissner@suse.de
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 182f12f319 ]
frontend_bound metrics was miscalculated due to different scaling in
a couple of metrics it depends on. Change the scaling to match with
AmpereOne.
Fixes: 16438b652b ("perf vendor events arm64 AmpereOneX: Add core PMU events and metrics")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250313201559.11332-3-ilkka@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d2dcd6352 ]
zfree() requires an address otherwise it frees what's in name, rather
than name itself. Pass the address of name to fix it.
This was the only incorrect occurrence in Perf found using a search.
Fixes: 8db5cabcf1 ("perf stat: Fork and launch 'perf record' when 'perf stat' needs to get retire latency value for a metric.")
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250319101614.190922-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebf0b33273 ]
Kernel modules for which we cannot find a file on-disk will have a
dso->long_name that looks like "[module_name]". Prior to the commit
listed in the fixes, the dso->kernel field would be zero (for user
space), so dso__is_kallsyms() would return false. After the commit,
kernel module DSOs are correctly labeled, but the result is that
dso__is_kallsyms() erroneously returns true for those modules without a
filesystem path.
Later, build_id_cache__add() consults this value of is_kallsyms, and
when true, it copies /proc/kallsyms into the cache. Users with many
kernel modules without a filesystem path (e.g. ksplice or possibly
kernel live patch modules) have reported excessive disk space usage in
the build ID cache directory due to this behavior.
To reproduce the issue, it's enough to build a trivial out-of-tree hello
world kernel module, load it using insmod, and then use:
perf record -ag -- sleep 1
In the build ID directory, there will be a directory for your module
name containing a kallsyms file.
Fix this up by changing dso__is_kallsyms() to consult the
dso_binary_type enumeration, which is also symmetric to the above checks
for dso__is_vmlinux() and dso__is_kcore(). With this change, kallsyms is
not cached in the build-id cache for out-of-tree modules.
Fixes: 02213cec64 ("perf maps: Mark module DSOs with kernel type")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/r/20250318230012.2038790-1-stephen.s.brennan@oracle.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89aaeaf842 ]
The pyrf_event__new() method copies the event obtained from the perf
ring buffer to a structure that will then be turned into a python object
for further consumption, so it copies perf_event.header.size bytes to
its 'event' member:
$ pahole -C pyrf_event /tmp/build/perf-tools-next/python/perf.cpython-312-x86_64-linux-gnu.so
struct pyrf_event {
PyObject ob_base; /* 0 16 */
struct evsel * evsel; /* 16 8 */
struct perf_sample sample; /* 24 312 */
/* XXX last struct has 7 bytes of padding, 2 holes */
/* --- cacheline 5 boundary (320 bytes) was 16 bytes ago --- */
union perf_event event; /* 336 4168 */
/* size: 4504, cachelines: 71, members: 4 */
/* member types with holes: 1, total: 2 */
/* paddings: 1, sum paddings: 7 */
/* last cacheline: 24 bytes */
};
$
It was doing so without checking if the event just obtained has more
than that space, fix it.
This isn't a proper, final solution, as we need to support larger
events, but for the time being we at least bounds check and document it.
Fixes: 877108e42b ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-7-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3fed3ae34 ]
When processing tracepoints the perf python binding was parsing the
event before calling perf_mmap__consume(&md->core) in
pyrf_evlist__read_on_cpu().
But part of this event parsing was to set the perf_sample->raw_data
pointer to the payload of the event, which then could be overwritten by
other event before tracepoint fields were asked for via event.prev_comm
in a python program, for instance.
This also happened with other fields, but strings were were problems
were surfacing, as there is UTF-8 validation for the potentially garbled
data.
This ended up showing up as (with some added debugging messages):
( field 'prev_comm' ret=0x7f7c31f65110, raw_size=68 ) ( field 'prev_pid' ret=0x7f7c23b1bed0, raw_size=68 ) ( field 'prev_prio' ret=0x7f7c239c0030, raw_size=68 ) ( field 'prev_state' ret=0x7f7c239c0250, raw_size=68 ) time 14771421785867 prev_comm= prev_pid=1919907691 prev_prio=796026219 prev_state=0x303a32313175 ==>
( XXX '��' len=16, raw_size=68) ( field 'next_comm' ret=(nil), raw_size=68 ) Traceback (most recent call last):
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 51, in <module>
main()
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 46, in main
event.next_comm,
^^^^^^^^^^^^^^^
AttributeError: 'perf.sample_event' object has no attribute 'next_comm'
When event.next_comm was asked for, the PyUnicode_FromString() python
API would fail and that tracepoint field wouldn't be available, stopping
the tools/perf/python/tracepoint.py test tool.
But, since we already do a copy of the whole event in pyrf_event__new,
just use it and while at it remove what was done in in e8968e6541
("perf python: Fix pyrf_evlist__read_on_cpu event consuming") because we
don't really need to wait for parsing the sample before declaring the
event as consumed.
This copy is questionable as is now, as it limits the maximum event +
sample_type and tracepoint payload to sizeof(union perf_event), this all
has been "working" because 'struct perf_event_mmap2', the largest entry
in 'union perf_event' is:
$ pahole -C perf_event ~/bin/perf | grep mmap2
struct perf_record_mmap2 mmap2; /* 0 4168 */
$
Fixes: bae57e3825 ("perf python: Add support to resolve tracepoint fields")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-6-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3de5a2bf5b ]
To avoid a leak if we have the python object but then something happens
and we need to return the operation, decrement the offset of the newly
created object.
Fixes: 377f698db1 ("perf python: Add struct evsel into struct pyrf_event")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-5-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1376c195e8 ]
Some old cut'n'paste error, its "ip", so the description should be
"event ip", not "event type".
Fixes: 877108e42b ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-2-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf67629f7f ]
No need to specify the array size, let the compiler figure that out.
This addresses this compiler warning that was noticed while build
testing on fedora rawhide:
31 15.81 fedora:rawhide : FAIL gcc version 15.0.1 20250225 (Red Hat 15.0.1-0) (GCC)
util/units.c: In function 'unit_number__scnprintf':
util/units.c:67:24: error: initializer-string for array of 'char' is too long [-Werror=unterminated-string-initialization]
67 | char unit[4] = "BKMG";
| ^~~~~~
cc1: all warnings being treated as errors
Fixes: 9808143ba2 ("perf tools: Add unit_number__scnprintf function")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250310194534.265487-3-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe0ce8a9d8 ]
Over various refactorings evlist__create_syswide_maps has been made to
only ever return with -ENOMEM. Fix this so that when
perf_evlist__set_maps is successfully called, 0 is returned.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250228222308.626803-3-irogers@google.com
Fixes: 8c0498b689 ("perf evlist: Fix create_syswide_maps() not propagating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bda840191d ]
In debug_file, pr_warning_once is called on error. As that function
calls debug_file the function will yield a stack overflow. Switch the
location of the call so the recursion is avoided.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250228222308.626803-2-irogers@google.com
Fixes: ec49230cf6 ("perf debug: Expose debug file")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
