[ Upstream commit 5097eaae98 ]
Here the lack of marking allows the overall structure to not be
sufficiently aligned resulting in misplacement of the timestamp
in iio_push_to_buffers_with_timestamp(). Use aligned_s64 to
force the alignment on all architectures.
Fixes: 7c0299e879 ("iio: adc: Add support for DLN2 ADC")
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bb942287e ]
The IIO ABI requires 64-bit aligned timestamps. In this case insufficient
padding would have been added on architectures where an s64 is only 32-bit
aligned. Use aligned_s64 to enforce the correct alignment.
Fixes: 327a0eaf19 ("iio: accel: adxl355: Add triggered buffer support")
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f79aeb6c63 ]
The trick of using __aligned(IIO_DMA_MINALIGN) ensures that there is
no overlap between buffers used for DMA and those used for driver
state storage that are before the marking. It doesn't ensure
anything above state variables found after the marking. Hence
move this particular bit of state earlier in the structure.
Fixes: 10897f3430 ("iio: temp: maxim_thermocouple: Fix alignment for DMA safety")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-14-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38f67d0264 ]
Fix setting the odr value to update activity time based on frequency
derrived by recent odr, and not by obsolete odr value.
The [small] bug: When _adxl367_set_odr() is called with a new odr value,
it first writes the new odr value to the hardware register
ADXL367_REG_FILTER_CTL.
Second, it calls _adxl367_set_act_time_ms(), which calls
adxl367_time_ms_to_samples(). Here st->odr still holds the old odr value.
This st->odr member is used to derrive a frequency value, which is
applied to update ADXL367_REG_TIME_ACT. Hence, the idea is to update
activity time, based on possibilities and power consumption by the
current ODR rate.
Finally, when the function calls return, again in _adxl367_set_odr() the
new ODR is assigned to st->odr.
The fix: When setting a new ODR value is set to ADXL367_REG_FILTER_CTL,
also ADXL367_REG_TIME_ACT should probably be updated with a frequency
based on the recent ODR value and not the old one. Changing the location
of the assignment to st->odr fixes this.
Fixes: cbab791c5e ("iio: accel: add ADXL367 driver")
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250309193515.2974-1-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8114ef86e2 upstream.
Prevent st_lsm6dsx_read_tagged_fifo from falling in an infinite loop in
case pattern_len is equal to zero and the device FIFO is not empty.
Fixes: 801a6e0af0 ("iio: imu: st_lsm6dsx: add support to LSM6DSO")
Signed-off-by: Silvano Seva <s.seva@4sigma.it>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250311085030.3593-4-s.seva@4sigma.it
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 159ca7f181 upstream.
Prevent st_lsm6dsx_read_fifo from falling in an infinite loop in case
pattern_len is equal to zero and the device FIFO is not empty.
Fixes: 290a6ce11d ("iio: imu: add support to lsm6dsx driver")
Signed-off-by: Silvano Seva <s.seva@4sigma.it>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250311085030.3593-2-s.seva@4sigma.it
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d2d8524ea upstream.
Align the buffer used with iio_push_to_buffers_with_timestamp() to
ensure the s64 timestamp is aligned to 8 bytes.
Fixes: 0829edc43e ("iio: imu: inv_mpu6050: read the full fifo when processing data")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-7-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 609bc31eca upstream.
The inclinometer channels were previously defined with 14 realbits.
However, the ADIS16201 datasheet states the resolution for these output
channels is 12 bits (Page 14, text description; Page 15, table 7).
Correct the realbits value to 12 to accurately reflect the hardware.
Fixes: f7fe1d1dd5 ("staging: iio: new adis16201 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250421131539.912966-1-gshahrouzi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 839f81de39 upstream.
clock_set_rate should be executed after devm_clk_get_enabled.
Fixes: 97ad10bb29 ("iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled")
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250312062016.137821-1-xxm@rock-chips.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f083f8a21c upstream.
Fix register read/write routine as per datasheet.
When reading multiple consecutive registers, only the first one is read
properly. This is due to missing chip select deassert and assert again
between first and second 16bit transfer, as shown in the datasheet
AD7606C-16, rev 0, figure 110.
Fixes: f2a22e1e17 ("iio: adc: ad7606: Add support for software mode for ad7616")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250418-wip-bl-ad7606-fix-reg-access-v3-1-d5eeb440c738@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8236644f5e ]
The ad7768-1 ADC output code is two's complement, meaning that the voltage
conversion result is a signed value.. Since the value is a 24 bit one,
stored in a 32 bit variable, the sign should be extended in order to get
the correct representation.
Also the channel description has been updated to signed representation,
to match the ADC specifications.
Fixes: a5f8c7da3d ("iio: adc: Add AD7768-1 ADC basic support")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://patch.msgid.link/505994d3b71c2aa38ba714d909a68e021f12124c.1741268122.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0af1c801a1 ]
The data used is all in local variables so there is no advantage
in setting *val = ret with the direct mode claim held.
Move it later to after error check.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250217141630.897334-13-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 8236644f5e ("iio: adc: ad7768-1: Fix conversion result sign")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee735aa33d ]
The array contains only 5 elements, but the index calculated by
veml6075_read_int_time_index can range from 0 to 7,
which could lead to out-of-bounds access. The check prevents this issue.
Coverity Issue
CID 1574309: (#1 of 1): Out-of-bounds read (OVERRUN)
overrun-local: Overrunning array veml6075_it_ms of 5 4-byte
elements at element index 7 (byte offset 31) using
index int_index (which evaluates to 7)
This is hardening against potentially broken hardware. Good to have
but not necessary to backport.
Fixes: 3b82f43238 ("iio: light: add VEML6075 UVA and UVB light sensor driver")
Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/Z7dnrEpKQdRZ2qFU@Emma
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2416cec859 ]
Datasheet recommends Setting the MOSI idle state to high in order to
prevent accidental reset of the device when SCLK is free running.
This happens when the controller clocks out a 1 followed by 63 zeros
while the CS is held low.
Check if SPI controller supports SPI_MOSI_IDLE_HIGH flag and set it.
Fixes: a5f8c7da3d ("iio: adc: Add AD7768-1 ADC basic support")
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/c2a2b0f3d54829079763a5511359a1fa80516cfb.1741268122.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b6033ed5a ]
Checking the binary representation of two structs (of the same type)
for equality doesn't have the same semantic as comparing all members for
equality. The former might find a difference where the latter doesn't in
the presence of padding or when ambiguous types like float or bool are
involved. (Floats typically have different representations for single
values, like -0.0 vs +0.0, or 0.5 * 2² vs 0.25 * 2³. The type bool has
at least 8 bits and the raw values 1 and 2 (probably) both evaluate to
true, but memcmp finds a difference.)
When searching for a channel that already has the configuration we need,
the comparison by member is the one that is needed.
Convert the comparison accordingly to compare the members one after
another. Also add a static_assert guard to (somewhat) ensure that when
struct ad7173_channel_config::config_props is expanded, the comparison
is adapted, too.
This issue is somewhat theoretic, but using memcmp() on a struct is a
bad pattern that is worth fixing.
Fixes: 76a1e6a428 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250303114659.1672695-14-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05a5d874f7 ]
Checking the binary representation of two structs (of the same type)
for equality doesn't have the same semantic as comparing all members for
equality. The former might find a difference where the latter doesn't in
the presence of padding or when ambiguous types like float or bool are
involved. (Floats typically have different representations for single
values, like -0.0 vs +0.0, or 0.5 * 2² vs 0.25 * 2³. The type bool has
at least 8 bits and the raw values 1 and 2 (probably) both evaluate to
true, but memcmp finds a difference.)
When searching for a channel that already has the configuration we need,
the comparison by member is the one that is needed.
Convert the comparison accordingly to compare the members one after
another. Also add a static_assert guard to (somewhat) ensure that when
struct ad7124_channel_config::config_props is expanded, the comparison
is adapted, too.
This issue is somewhat theoretic, but using memcmp() on a struct is a
bad pattern that is worth fixing.
Fixes: 7b8d045e49 ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250303114659.1672695-13-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 280acb1982 ]
Checking the binary representation of two structs (of the same type)
for equality doesn't have the same semantic as comparing all members for
equality. The former might find a difference where the latter doesn't in
the presence of padding or when ambiguous types like float or bool are
involved. (Floats typically have different representations for single
values, like -0.0 vs +0.0, or 0.5 * 2² vs 0.25 * 2³. The type bool has
at least 8 bits and the raw values 1 and 2 (probably) both evaluate to
true, but memcmp finds a difference.)
When searching for a channel that already has the configuration we need,
the comparison by member is the one that is needed.
Convert the comparison accordingly to compare the members one after
another. Also add a static_assert guard to (somewhat) ensure that when
struct ad4130_setup_info is expanded, the comparison is adapted, too.
This issue is somewhat theoretic, but using memcmp() on a struct is a
bad pattern that is worth fixing.
Fixes: 62094060cf ("iio: adc: ad4130: add AD4130 driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250303114659.1672695-12-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 035b498921 ]
Make sure to NULL terminate the buffer in
iio_backend_debugfs_write_reg() before passing it to sscanf(). It is a
stack variable so we should not assume it will 0 initialized.
Fixes: cdf01e0809 ("iio: backend: add debugFs interface")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250218-dev-iio-misc-v1-1-bf72b20a1eb8@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60a0cf2eba ]
Reorder the claiming of direct mode and runtime pm calls to simplify
handling a little. For correct error handling, after the reorder
iio_device_release_direct_mode() must be claimed in an error occurs
in pm_runtime_resume_and_get()
Fixes: 1ca2cfbc0c ("iio: add MEMSensing MSA311 3-axis accelerometer driver")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250217140135.896574-7-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df330c8081 ]
If a match was not found, then the write_raw() callback would return
the odr index, not an error. Return -EINVAL if this occurs.
To avoid similar issues in future, introduce j, a new indexing variable
rather than using ret for this purpose.
Fixes: 79de2ee469 ("iio: accel: mma8452: claim direct mode during write raw")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250217140135.896574-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit aa5119c36d upstream.
The number of valid bits in SAMA7G5 ADC channel data register are 16.
Hence changing the realbits value to 16
Fixes: 840bf6cb98 ("iio: adc: at91-sama5d2_adc: add support for sama7g5 device")
Signed-off-by: Nayab Sayed <nayabbasha.sayed@microchip.com>
Link: https://patch.msgid.link/20250115-fix-sama7g5-adc-realbits-v2-1-58a6e4087584@microchip.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21d7241faf upstream.
Channel configuration doesn't work as expected.
For FIELD_PREP the bit mask is needed and not the bit number.
Fixes: 874bbd1219 ("iio: adc: ad7192: Use bitfield access macros")
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250124150703.97848-1-markus.burri@mt.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e17b9f20da upstream.
Clear reset status flag, to keep error status register clean after reset
(ad3552r manual, rev B table 38).
Reset error flag was left to 1, so debugging registers, the "Error
Status Register" was dirty (0x01). It is important to clear this bit, so
if there is any reset event over normal working mode, it is possible to
detect it.
Fixes: 8f2b54824b ("drivers:iio:dac: Add AD3552R driver support")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250125-wip-bl-ad3552r-clear-reset-v2-1-aa3a27f3ff8c@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a96d3e2bec upstream.
The two provided max_scale_nano values must be multiplied by 100 and 10
respectively to achieve nano units. According to the comments:
Max scale for apds0306 is 16.326432 → the fractional part is 0.326432,
which is 326432000 in NANO. The current value is 3264320.
Max scale for apds0306-065 is 14.09721 → the fractional part is 0.09712,
which is 97120000 in NANO. The current value is 9712000.
Update max_scale_nano initialization to use the right NANO fractional
parts.
Cc: stable@vger.kernel.org
Fixes: 620d1e6c7a ("iio: light: Add support for APDS9306 Light Sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Tested-by: subhajit.ghosh@tweaklogic.com
Link: https://patch.msgid.link/20250112-apds9306_nano_vals-v1-1-82fb145d0b16@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc2c3540d9 upstream.
When a weak pull-up is present on the SDO line, regmap_update_bits fails
to write both the SOFTRESET and SDOACTIVE bits because it incorrectly
reads them as already set.
Since the soft reset disables the SDO line, performing a
read-modify-write operation on ADI_SPI_CONFIG_A to enable the SDO line
doesn't make sense. This change directly writes to the register instead
of using regmap_update_bits.
Fixes: f34fe888ad ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/SA1P110MB106904C961B0F3FAFFED74C0BCF5A@SA1P110MB1069.NAMP110.PROD.OUTLOOK.COM
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab09c6cfe0 upstream.
The channel index is off by one unit if AS73211_SCAN_MASK_ALL is not
set (optimized path for color channel readings), and it must be shifted
instead of leaving an empty channel for the temperature when it is off.
Once the channel index is fixed, the uninitialized channel must be set
to zero to avoid pushing uninitialized data.
Add available_scan_masks for all channels and only-color channels to let
the IIO core demux and repack the enabled channels.
Cc: stable@vger.kernel.org
Fixes: 403e5586b5 ("iio: light: as73211: New driver")
Tested-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241214-iio_memset_scan_holes-v4-1-260b395b8ed5@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0f866de4c upstream.
Burst write with SPI is not working for all icm42600 chips. It was
only used for setting user offsets with regmap_bulk_write.
Add specific SPI regmap config for using only single write with SPI.
Fixes: 9f9ff91b77 ("iio: imu: inv_icm42600: add SPI driver for inv_icm42600 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20241112-inv-icm42600-fix-spi-burst-write-not-supported-v2-1-97690dc03607@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4be339af33 upstream.
When during a measurement two channels are enabled, two measurements are
done that are reported sequencially in the DATA register. As the code
triggered by reading one of the sysfs properties expects that only one
channel is enabled it only reads the first data set which might or might
not belong to the intended channel.
To prevent this situation disable all channels during probe. This fixes
a problem in practise because the reset default for channel 0 is
enabled. So all measurements before the first measurement on channel 0
(which disables channel 0 at the end) might report wrong values.
Fixes: 7b8d045e49 ("iio: adc: ad7124: allow more than 8 channels")
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20241104101905.845737-2-u.kleine-koenig@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36a44e05cd upstream.
Fix a possible race condition during driver probe in the ad7173 driver
due to using a shared static info struct. If more that one instance of
the driver is probed at the same time, some of the info could be
overwritten by the other instance, leading to incorrect operation.
To fix this, make the static info struct const so that it is read-only
and make a copy of the info struct for each instance of the driver that
can be modified.
Reported-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Fixes: 76a1e6a428 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Tested-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://patch.msgid.link/20241127-iio-adc-ad7313-fix-non-const-info-struct-v2-1-b6d7022b7466@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64f43895b4 upstream.
In the error path of iio_channel_get_all(), iio_device_put() is called
on all IIO devices, which can cause a refcount imbalance. Fix this error
by calling iio_device_put() only on IIO devices whose refcounts were
previously incremented by iio_device_get().
Fixes: 314be14bb8 ("iio: Rename _st_ functions to loose the bit that meant the staging version.")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241204111342.1246706-1-joe@pf.is.s.u-tokyo.ac.jp
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de6a73bad1 upstream.
Current implementation of at91_ts_register() calls input_free_deivce()
on st->ts_input, however, the err label can be reached before the
allocated iio_dev is stored to st->ts_input. Thus call
input_free_device() on input instead of st->ts_input.
Fixes: 84882b0603 ("iio: adc: at91_adc: Add support for touchscreens without TSMR")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241207043045.1255409-1-joe@pf.is.s.u-tokyo.ac.jp
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a8e34096e upstream.
Using gpiod_set_value() to control the reset GPIO causes some verbose
warnings during boot when the reset GPIO is controlled by an I2C IO
expander.
As the caller can sleep, use the gpiod_set_value_cansleep() variant to
fix the issue.
Tested on a custom i.MX93 board with a ADS124S08 ADC.
Cc: stable@kernel.org
Fixes: e717f8c6df ("iio: adc: Add the TI ads124s08 ADC code")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20241122164308.390340-1-festevam@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65a60a5901 upstream.
Currently suspending while sensors are one will result in timestamping
continuing without gap at resume. It can work with monotonic clock but
not with other clocks. Fix that by resetting timestamping.
Fixes: ec74ae9fd3 ("iio: imu: inv_icm42600: add accurate timestamping")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20241113-inv_icm42600-fix-timestamps-after-suspend-v1-1-dfc77c394173@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcb394bb28 upstream.
devm_kasprintf() can return a NULL pointer on failure. A check on the
return value of such a call in ads1298_init() is missing. Add it.
Fixes: 00ef7708fa ("iio: adc: ti-ads1298: Add driver")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://patch.msgid.link/20241118090208.14586-1-hanchunchao@inspur.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa13ac6cdf upstream.
The fxas21002c_trigger_handler() may fail to acquire sample data because
the runtime PM enters the autosuspend state and sensor can not return
sample data in standby mode..
Resume the sensor before reading the sample data into the buffer within the
trigger handler. After the data is read, place the sensor back into the
autosuspend state.
Fixes: a0701b6263 ("iio: gyro: add core driver for fxas21002c")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20241116152945.4006374-1-Frank.Li@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54d394905c upstream.
This device returns signed, 16-bit samples as stated in its datasheet
(see 8.5.2 Data Format). That is in line with the scan_type definition
for the IIO_VOLTAGE channel, but 'unsigned int' is being used to read
and push the data to userspace.
Given that the size of that type depends on the architecture (at least
2 bytes to store values up to 65535, but its actual size is often 4
bytes), use the 's16' type to provide the same structure in all cases.
Fixes: a9306887eb ("iio: adc: ti-ads1119: Add driver")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20241202-ti-ads1119_s16_chan-v1-1-fafe3136dc90@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75f339d3ec upstream.
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it has a hole between the sample (unsigned int)
and the timestamp. This hole is never initialized.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: a9306887eb ("iio: adc: ti-ads1119: Add driver")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-2-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a7377ccfd upstream.
The 'buffer' local array is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: 61fa5dfa5f ("iio: adc: ti-ads8688: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-8-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3872459136 upstream.
The 'data' local struct is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: 4e130dc7b4 ("iio: adc: rockchip_saradc: Add support iio buffers")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-4-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ae053113f upstream.
The 'buffer' local array is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: c3a23ecc09 ("iio: imu: kmx61: Add support for data ready triggers")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-5-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b62fbe3b8e upstream.
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: eab35358aa ("iio: light: ROHM BH1745 colour sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-7-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47b43e53c0 upstream.
The 'buffer' local array is used to push data to userspace from a
triggered buffer, but it does not set an initial value for the single
data element, which is an u16 aligned to 8 bytes. That leaves at least
4 bytes uninitialized even after writing an integer value with
regmap_read().
Initialize the array to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: ec90b52c07 ("iio: light: vcnl4035: Fix buffer alignment in iio_push_to_buffers_with_timestamp()")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-6-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 333be433ee upstream.
The 'data' array is allocated via kmalloc() and it is used to push data
to user space from a triggered buffer, but it does not set values for
inactive channels, as it only uses iio_for_each_active_channel()
to assign new values.
Use kzalloc for the memory allocation to avoid pushing uninitialized
information to userspace.
Cc: stable@vger.kernel.org
Fixes: 415f792447 ("iio: Move IIO Dummy Driver out of staging")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-9-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6007d10c52 upstream.
The 'sample' local struct is used to push data to user space from a
triggered buffer, but it has a hole between the temperature and the
timestamp (u32 pressure, u16 temperature, GAP, u64 timestamp).
This hole is never initialized.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace.
Cc: stable@vger.kernel.org
Fixes: 03b262f2bb ("iio:pressure: initial zpa2326 barometer support")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-3-0cb6e98d895c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a884bdb6e upstream.
Add mising braces after an if condition that contains scoped_guard().
This style is both preferred and necessary here, to fix warning after
scoped_guard() change in commit fcc22ac5ba ("cleanup: Adjust
scoped_guard() macros to avoid potential warning") to have if-else inside
of the macro. Current (no braces) use in af8133j_set_scale() yields
the following warnings:
af8133j.c:315:12: warning: suggest explicit braces to avoid ambiguous 'else' [-Wdangling-else]
af8133j.c:316:3: warning: add explicit braces to avoid dangling else [-Wdangling-else]
Fixes: fcc22ac5ba ("cleanup: Adjust scoped_guard() macros to avoid potential warning")
Closes: https://lore.kernel.org/oe-kbuild-all/202409270848.tTpyEAR7-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20241108154258.21411-1-przemyslaw.kitszel@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f1ee5483e4 ]
In the function yas537_measure() there is a clamp_val() with limits of
-BIT(13) and BIT(13) - 1. The input clamp value h[] is of type s32. The
BIT() is of type unsigned long integer due to its define in
include/vdso/bits.h. The lower limit -BIT(13) is recognized as -8192 but
expressed as an unsigned long integer. The size of an unsigned long
integer differs between 32-bit and 64-bit architectures. Converting this
to type s32 may lead to undesired behavior.
Additionally, in the calculation lines h[0], h[1] and h[2] the unsigned
long integer divisor BIT(13) causes an unsigned division, shifting the
left-hand side of the equation back and forth, possibly ending up in large
positive values instead of negative values on 32-bit architectures.
To solve those two issues, declare a signed integer with a value of
BIT(13).
There is another omission in the clamp line: clamp_val() returns a value
and it's going nowhere here. Self-assign it to h[i] to make use of the
clamp macro.
Finally, replace clamp_val() macro by clamp() because after changing the
limits from type unsigned long integer to signed integer it's fine that
way.
Link: https://lkml.kernel.org/r/11609b2243c295d65ab4d47e78c239d61ad6be75.1732914810.git.jahau@rocketmail.com
Fixes: 65f79b5010 ("iio: magnetometer: yas530: Add YAS537 variant")
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411230458.dhZwh3TT-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202411282222.oF0B4110-lkp@intel.com/
Reviewed-by: David Laight <david.laight@aculab.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7452f8a081 upstream.
In iio_gts_build_avail_time_table(), it is checked that gts->num_itime is
non-zero, but gts->num_itime is not checked in gain_to_scaletables(). The
variable time_idx is initialized as gts->num_itime - 1. This implies that
time_idx might initially be set to -1 (0 - 1 = -1). Consequently, using
while (time_idx--) could lead to an infinite loop.
Cc: stable@vger.kernel.org # v6.6+
Fixes: 38416c28e1 ("iio: light: Add gain-time-scale helpers")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20241031014626.2313077-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a4187ec45 upstream.
The AD7923 was updated to support devices with 8 channels, but the size
of tx_buf and ring_xfer was not increased accordingly, leading to a
potential buffer overflow in ad7923_update_scan_mode().
Fixes: 851644a60d ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928")
Cc: stable@vger.kernel.org
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Link: https://patch.msgid.link/20241029134637.2261336-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
