commit 1149719442 upstream.
There seem to be multiple USB device IDs used for these;
the one I have reports as 0b0e:030c when powered on.
(When powered off, it reports as 0b0e:0311.)
Signed-off-by: Joachim Priesner <joachim.priesner@web.de>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250428053606.9237-1-joachim.priesner@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f406005e16 upstream.
During initialisation of Focusrite USB audio interfaces, -EPROTO is
sometimes returned from usb_set_interface(), which sometimes prevents
the device from working: subsequent usb_set_interface() and
uac_clock_source_is_valid() calls fail.
This patch adds up to 5 retries in endpoint_set_interface(), with a
delay starting at 5ms and doubling each time. 5 retries was chosen to
allow for longer than expected waits for the interface to start
responding correctly; in testing, a single 5ms delay was sufficient to
fix the issue.
Closes: https://github.com/geoffreybennett/fcp-support/issues/2
Cc: stable@vger.kernel.org
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/Z//7s9dKsmVxHzY2@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c2820405ba ]
Fix quirk for CME master keyboards so it not only handles
sysex but also song position pointer, MIDI timing clock, start
and stop messages, and active sensing. All of these can be
output by the CME UF series master keyboards.
Tested with a CME UF6 in a desktop Linux environment as
well as on the Zynthian Raspberry Pi based platform.
Signed-off-by: Ricard Wanderlof <ricard2013@butoba.net>
Link: https://patch.msgid.link/20250313-cme-fix-v1-1-d404889e4de8@butoba.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 486f6205c2 upstream.
Many Poly/Plantronics headset families name the feature, input,
and/or output units in a such a way to produce control names
that are not recognized by user space. As such, the volume and
mute events do not get routed to the headset's audio controls.
As an example from a product family:
The microphone mute control is named
Headset Microphone Capture Switch
and the headset volume control is named
Headset Earphone Playback Volume
The quirk fixes these to become
Headset Capture Switch
Headset Playback Volume
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 172a0f5097 ]
The module parameter defines number of iso packets per one URB. User is
allowed to set any value to the parameter of type int, which can lead to
various kinds of weird and incorrect behavior like integer overflows,
truncations, etc. Number of packets should be a small non-negative number.
Since this parameter is read-only, its value can be validated on driver
probe.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250303100413.835-1-m.masimov@mt-integration.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9af3b4f2d8 upstream.
Re-add the sample-rate quirk for the Pioneer DJM-900NXS2. This
device does not work without setting sample-rate.
Signed-off-by: Dmitry Panchenko <dmitry@d-systems.ee>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250220161540.3624660-1-dmitry@d-systems.ee
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a3bdd8f5c2 ]
We fixed the UAF issue in USB MIDI code by canceling the pending work
at closing each MIDI output device in the commit below. However, this
assumed that it's the only one that is tied with the endpoint, and it
resulted in unexpected data truncations when multiple devices are
assigned to a single endpoint and opened simultaneously.
For addressing the unexpected MIDI message drops, simply replace
cancel_work_sync() with flush_work(). The drain callback should have
been already invoked before the close callback, hence the port->active
flag must be already cleared. So this just assures that the pending
work is finished before freeing the resources.
Fixes: 0125de3812 ("ALSA: usb-audio: Cancel pending work at closing a MIDI substream")
Reported-and-tested-by: John Keeping <jkeeping@inmusicbrands.com>
Closes: https://lore.kernel.org/20250217111647.3368132-1-jkeeping@inmusicbrands.com
Link: https://patch.msgid.link/20250218114024.23125-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d85fc52cbb upstream.
Audio control requests that sets sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.
usb 1-1: New USB device found, idVendor=2fc6, idProduct=f0b7
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: iBasso DC07 Pro
usb 1-1: Manufacturer: iBasso
usb 1-1: SerialNumber: CTUA171130B
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/TYUPR06MB62174A48D04E09A37996DF84D2ED2@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad5b205f9e upstream.
Audio control requests that sets sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.
usb 1-1: New USB device found, idVendor=0d8c, idProduct=0014
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Audio Device
usb 1-1: Manufacturer: C-Media Electronics Inc.
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217E94D922B9BF422A73F32D2192@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b50a3e9844 ]
UAC 2 & 3 DAC's set bit 31 of the format to signal support for a
RAW_DATA type, typically used for DSD playback.
This is correctly tested by (format & UAC*_FORMAT_TYPE_I_RAW_DATA),
fp->dsd_raw = true; and call snd_usb_interface_dsd_format_quirks(),
however a confusing and unnecessary message gets printed because
the bit is not properly tested in the last "unsupported" if test:
if (format & ~0x3F) { ... }
For example the output:
usb 7-1: new high-speed USB device number 5 using xhci_hcd
usb 7-1: New USB device found, idVendor=262a, idProduct=9302, bcdDevice=0.01
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 7-1: Product: TC44C
usb 7-1: Manufacturer: TC44C
usb 7-1: SerialNumber: 5000000001
hid-generic 0003:262A:9302.001E: No inputs registered, leaving
hid-generic 0003:262A:9302.001E: hidraw6: USB HID v1.00 Device [DDHIFI TC44C] on usb-0000:08:00.3-1/input0
usb 7-1: 2:4 : unsupported format bits 0x100000000
This last "unsupported format" is actually wrong: we know the
format is a RAW_DATA which we assume is DSD, so there is no need
to print the confusing message.
This we unset bit 31 of the format after recognizing it, to avoid
the message.
Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Link: https://patch.msgid.link/20241209090529.16134-2-adrian.ratiu@collabora.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6e6b9218c ]
It seems that many webcams have buggy firmware and don't expose the
mic capture volume with the proper resolution. We have workarounds in
mixer.c, but judging from the numbers, those can be better managed as
global quirk flags.
Link: https://patch.msgid.link/20241105120220.5740-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a7de2b873f upstream.
The Corsair HS80 RGB Wireless is a USB headset with a mic and a sidetone
feature. It has the same quirk as the Virtuoso series.
This labels the mixers appropriately, so applications don't
move the sidetone volume when they actually intend to move the main
headset volume.
Signed-off-by: Marie Ramlow <me@nycode.dev>
cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241130165240.17838-1-me@nycode.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f09f0397db upstream.
It seems there is an alternate version of the hardware with a different
PID. User testing reveals this still works with the same interface as far
as the kernel is concerned, so just add the extra PID. Thanks to Heiko
Engemann for testing with this version.
Due to the way quirks-table.h is structured, that means we have to turn
the entire quirk struct into a macro to avoid duplicating it...
Cc: stable@vger.kernel.org
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20241202-rme-digiface-usb-id-v1-1-50f730d7a46e@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7d306b47a upstream.
The usb_get_descriptor() function does DMA so we're not allowed
to use a stack buffer for that. Doing DMA to the stack is not portable
all architectures. Move the "new_device_descriptor" from being stored
on the stack and allocate it with kmalloc() instead.
Fixes: b909df18ce ("ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices")
Cc: stable@kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/60e3aa09-039d-46d2-934c-6f123026c2eb@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4f9d674377 ]
The low-latency mode of USB-audio driver uses a similar approach like
the implicit feedback mode but it has an explicit queuing at the
trigger start time. The difference is, however, that no packet will
be handled any longer after all queued packets are handled but no
enough data is fed. In the case of implicit feedback mode, the
capture-side packet handling triggers the re-queuing, and this checks
the XRUN. OTOH, in the low-latency mode, it just stops without XRUN
notification unless any new action is taken from user-space via ack
callback. For example, when you stop the stream in aplay, no XRUN is
reported.
This patch adds the XRUN check at the packet complete callback in the
case all pending URBs are exhausted. Strictly speaking, this state
doesn't match really with XRUN; in theory the application may queue
immediately after this happens. But such behavior is only for
1-period configuration, which the USB-audio driver doesn't support.
So we may conclude that this situation leads certainly to XRUN.
A caveat is that the XRUN should be triggered only for the PCM RUNNING
state, and not during DRAINING. This additional state check is put in
notify_xrun(), too.
Fixes: d5f871f89e ("ALSA: usb-audio: Improved lowlatency playback support")
Reported-by: Leonard Crestez <cdleonard@gmail.com>
Link: https://lore.kernel.org/25d5b0d8-4efd-4630-9d33-7a9e3fa9dc2b@gmail.com
Link: https://patch.msgid.link/20241128080446.1181-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a3dd4d63ee upstream.
The current USB-audio driver code doesn't check bLength of each
descriptor at traversing for clock descriptors. That is, when a
device provides a bogus descriptor with a shorter bLength, the driver
might hit out-of-bounds reads.
For addressing it, this patch adds sanity checks to the validator
functions for the clock descriptor traversal. When the descriptor
length is shorter than expected, it's skipped in the loop.
For the clock source and clock multiplier descriptors, we can just
check bLength against the sizeof() of each descriptor type.
OTOH, the clock selector descriptor of UAC2 and UAC3 has an array
of bNrInPins elements and two more fields at its tail, hence those
have to be checked in addition to the sizeof() check.
Reported-by: Benoît Sevens <bsevens@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/20241121140613.3651-1-bsevens@google.com
Link: https://patch.msgid.link/20241125144629.20757-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b909df18ce upstream.
A bogus device can provide a bNumConfigurations value that exceeds the
initial value used in usb_get_configuration for allocating dev->config.
This can lead to out-of-bounds accesses later, e.g. in
usb_destroy_configuration.
Signed-off-by: Benoît Sevens <bsevens@google.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Link: https://patch.msgid.link/20241120124144.3814457-1-bsevens@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a0810c3d6d ]
The current 6fire code tries to release the resources right after the
call of usb6fire_chip_abort(). But at this moment, the card object
might be still in use (as we're calling snd_card_free_when_closed()).
For avoid potential UAFs, move the release of resources to the card's
private_free instead of the manual call of usb6fire_chip_destroy() at
the USB disconnect callback.
Fixes: c6d43ba816 ("ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-6-tiwai@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b04dcbb7f7 ]
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
This patch also splits the code to the disconnect and the free phases;
the former is called immediately at the USB disconnect callback while
the latter is called from the card destructor.
Fixes: 523f1dce37 ("[ALSA] Add Native Instrument usb audio device support")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-5-tiwai@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7df09bb34 ]
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
The loop of us122l->mmap_count check is dropped as well. The check is
useless for the asynchronous operation with *_when_closed().
Fixes: 030a07e441 ("ALSA: Add USB US122L driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-3-tiwai@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dafb28f02b ]
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
Fixes: 230cd5e248 ("[ALSA] prevent oops & dead keyboard on usb unplugging while the device is be ing used")
Reported-by: syzbot+73582d08864d8268b6fd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=73582d08864d8268b6fd
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241113111042.15058-2-tiwai@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch switches the P-125 quirk entry to use a composite quirk as the
P-125 supplies both MIDI and Audio like many of the other Yamaha
keyboards
Signed-off-by: Eryk Zagorski <erykzagorski@gmail.com>
Link: https://patch.msgid.link/20241111164520.9079-2-erykzagorski@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The WD19 family of docks has the same audio chipset as the WD15. This
change enables jack detection on the WD19.
We don't need the dell_dock_mixer_init quirk for the WD19. It is only
needed because of the dell_alc4020_map quirk for the WD15 in
mixer_maps.c, which disables the volume controls. Even for the WD15,
this quirk was apparently only needed when the dock firmware was not
updated.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241029221249.15661-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Line6 driver source code files contain an outdated email address of the
original author. This patch updates the contact information.
Signed-off-by: Markus Grabner <line6@grabner-graz.at>
Link: https://patch.msgid.link/20241009194251.15662-1-line6@grabner-graz.at
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit adding support for multiple control interfaces expanded struct
snd_usb_power_domain with pointer to control interface for proper control
message routing but missed one initialization point of this structure,
which has left new field with NULL value.
Standard mandates that each device has at least one control interface and
code responsible for power domain does not check for NULL values when
querying for control interface. This caused some USB devices to crash
the kernel.
Fixes: 6aa8700150 ("ALSA: usb-audio: Support multiple control interfaces")
Signed-off-by: Karol Kosik <k.kosik@outlook.com>
Link: https://patch.msgid.link/AS8P190MB1285B563C6B5394DB274813FEC782@AS8P190MB1285.EURP190.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add hw monitor volume control for POD HD500X. This is done adding
LINE6_CAP_HWMON_CTL to the capabilities
Signed-off-by: Hans P. Moller <hmoller@uc.cl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241003232828.5819-1-hmoller@uc.cl
Add native DSD support for Luxman D-08u DAC, by adding the PID/VID 1852:5062.
This makes DSD playback work, and also sound quality when playing PCM files
is improved, crackling sounds are gone.
Signed-off-by: Jan Lalinsky <lalinsky@c4.cz>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241003030811.2655735-1-lalinsky@c4.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Implement sync, output format, and input status mixer controls, to allow
the interface to be used as a straight ADAT/SPDIF (+ Headphones) I/O
interface.
This does not implement the matrix mixer, output gain controls, or input
level meter feedback. The full mixer interface is only really usable
using a dedicated userspace control app (there are too many mixer nodes
for alsamixer to be usable), so for now we leave it up to userspace to
directly control these features using raw USB control messages. This is
similar to how it's done with some FireWire interfaces (ffado-mixer).
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20240903-rme-digiface-v2-2-71b06c912e97@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add trivial support for audio streaming on the RME Digiface USB. Binds
only to the first interface to allow userspace to directly drive the
complex I/O and matrix mixer controls.
Signed-off-by: Cyan Nyan <cyan.vtb@gmail.com>
[Lina: Added 2x/4x sample rate support & boot/format quirks]
Co-developed-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20240903-rme-digiface-v2-1-71b06c912e97@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Let the kmemdup_array() take care about multiplication
and possible overflows.
Using kmemdup_array() is more appropriate and makes the code
easier to audit.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://patch.msgid.link/20240826043454.3198-1-shenlichuan@vivo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply the newly introduced macros for reduce the complex expressions
and cast in the quirk table definitions. It results in a significant
code reduction, too.
There should be no functional changes.
Link: https://patch.msgid.link/20240814134844.2726-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many entries in the USB-audio quirk tables have relatively complex
expressions. For improving the readability, introduce a few macros.
Those are applied in the following patch.
Link: https://patch.msgid.link/20240814134844.2726-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Registering Numark Party Mix II fails with error 'bogus bTerminalLink 1'.
The problem stems from the driver not being able to find input/output
terminals required to configure audio streaming. The information about
those terminals is stored in AudioControl Interface. Numark device
contains 2 AudioControl Interfaces and the driver checks only one of them.
According to the USB standard, a device can have multiple audio functions,
each represented by Audio Interface Collection. Every audio function is
considered to be closed box and will contain unique AudioControl Interface
and zero or more AudioStreaming and MIDIStreaming Interfaces.
The Numark device adheres to the standard and defines two audio functions:
- MIDIStreaming function
- AudioStreaming function
It starts with MIDI function, followed by the audio function. The driver
saves the first AudioControl Interface in `snd_usb_audio` structure
associated with the entire device. It then attempts to use this interface
to query for terminals and clocks. However, this fails because the correct
information is stored in the second AudioControl Interface, defined in the
second Audio Interface Collection.
This patch introduces a structure holding association between each
MIDI/Audio Interface and its corresponding AudioControl Interface,
instead of relying on AudioControl Interface defined for the entire
device. This structure is populated during usb probing phase and leveraged
later when querying for terminals and when sending USB requests.
Alternative solutions considered include:
- defining a quirk for Numark where the order of interface is manually
changed, or terminals are hardcoded in the driver. This solution would
have fixed only this model, though it seems that device is USB compliant,
and it also seems that other devices from this company may be affected.
What's more, it looks like products from other manufacturers have similar
problems, i.e. Rane One DJ console
- keeping a list of all AudioControl Interfaces and querying all of them
to find required information. That would have solved my problem and have
low probability of breaking other devices, as we would always start with
the same logic of querying first AudioControl Interface. This solution
would not have followed the standard though.
This patch preserves the `snd_usb_audio.ctrl_intf` variable, which holds
the first AudioControl Interface, and uses it as a fallback when some
interfaces are not parsed correctly and lack an associated AudioControl
Interface, i.e., when configured via quirks.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217865
Signed-off-by: Karol Kosik <k.kosik@outlook.com>
Link: https://patch.msgid.link/AS8P190MB1285893F4735C8B32AD3886BEC852@AS8P190MB1285.EURP190.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add missing input gain and master output mixer controls for
RME Babyface Pro.
This patch implements:
1. Input gain controls for 2 mic and 2 line inputs
2. Master output volume controls for all 12 output channels
These additions allow for more complete control of the Babyface Pro under
Linux.
Signed-off-by: Stefan Stistrup <sstistrup@gmail.com>
Link: https://patch.msgid.link/20240809204922.20112-1-sstistrup@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use snd_pcm_rate_to_rate_bit() helper provided by Alsa instead
re-implementing it. This reduce code duplication and helps when
changing some Alsa definition is necessary.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20240808134857.86749-1-jbrunet@baylibre.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The call of usb_set_interface() and a delay are superfluous when the
device has been already disconnected. Add a disconnection check
before doing it.
Link: https://patch.msgid.link/20240808091522.31415-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
