[ Upstream commit 50980d8da7 ]
Using random mac address is not an error since the driver continues to
function, it should be informative that the system has not assigned
a MAC address. This is inline with other drivers such as ax88796c,
dm9051 etc. Drop the error level to info level.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250516122655.442808-1-nm@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9176bd205e upstream.
Avoid the driver missing IRQs by temporarily masking IRQs in the ISR
to enforce an edge even if a different IRQ is signalled before handled
IRQs are cleared.
Fixes: 48f827d4f4 ("can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR")
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-2-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43f0999af0 upstream.
Currently, when device mtu is updated, vmxnet3 updates netdev mtu, quiesces
the device and then reactivates it for the ESXi to know about the new mtu.
So, technically the OS stack can start using the new mtu before ESXi knows
about the new mtu.
This can lead to issues for TSO packets which use mss as per the new mtu
configured. This patch fixes this issue by moving the mtu write after
device quiesce.
Cc: stable@vger.kernel.org
Fixes: d1a890fa37 ("net: VMware virtual Ethernet NIC driver: vmxnet3")
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Changes v1-> v2:
Moved MTU write after destroy of rx rings
Link: https://patch.msgid.link/20250515190457.8597-1-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8256e0ca60 upstream.
The functions kvaser_pciefd_start_xmit() and
kvaser_pciefd_handle_ack_packet() raced to stop/wake TX queues and
get/put echo skbs, as kvaser_pciefd_can->echo_lock was only ever taken
when transmitting and KCAN_TX_NR_PACKETS_CURRENT gets decremented
prior to handling of ACKs. E.g., this caused the following error:
can_put_echo_skb: BUG! echo_skb 5 is occupied!
Instead, use the synchronization helpers in netdev_queues.h. As those
piggyback on BQL barriers, start updating in-flight packets and bytes
counts as well.
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-3-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d820b81c4 upstream.
Going bus-off on a channel doing RX could result in dropped packets.
As netif_running() gets cleared before the channel abort procedure,
the handling of any last RDATA packets would see netif_rx() return
non-zero to signal a dropped packet. kvaser_pciefd_read_buffer() dealt
with this "error" by breaking out of processing the remaining DMA RX
buffer.
Only return an error from kvaser_pciefd_read_buffer() due to packet
corruption, otherwise handle it internally.
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-4-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef0841e4cb upstream.
Allows slcan to receive short messages (typically errors) from the serial
interface.
When error support was added to slcan protocol in
b32ff46685 ("can: slcan: extend the protocol
with error info") the minimum valid message size changed from 5 (minimum
standard can frame tIII0) to 3 ("e1a" is a valid protocol message, it is
one of the examples given in the comments for slcan_bump_err() ), but the
check for minimum message length prodicating all decoding was not adjusted.
This makes short error messages discarded and error frames not being
generated.
This patch changes the minimum length to the new minimum (3 characters,
excluding terminator, is now a valid message).
Signed-off-by: Carlos Sanchez <carlossanchez@geotab.com>
Fixes: b32ff46685 ("can: slcan: extend the protocol with error info")
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250520102305.1097494-1-carlossanchez@geotab.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a6ae712981 ]
The current implementation maps the APR table using a fixed size,
which can lead to incorrect mapping when the number of PFs and VFs
varies.
This patch corrects the mapping by calculating the APR table
size dynamically based on the values configured in the
APR_LMT_CFG register, ensuring accurate representation
of APR entries in debugfs.
Fixes: 0daa55d033 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://patch.msgid.link/20250521060834.19780-3-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0eefa27b49 ]
This patch enables the LMT line for a PF/VF by setting the
LMT_ENA bit in the APR_LMT_MAP_ENTRY_S structure.
Additionally, it simplifies the logic for calculating the
LMTST table index by consistently using the maximum
number of hw supported VFs (i.e., 256).
Fixes: 873a1e3d20 ("octeontx2-af: cn10k: Setting up lmtst map table").
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250521060834.19780-2-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4164de504 ]
Set xdp rx ring memory type as MEM_TYPE_PAGE_POOL for
af-xdp to work. This is needed since xdp_return_frame
internally will use page pools.
Fixes: 06059a1a9a ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 407e0efdf8 ]
idpf_vport_splitq_napi_poll() can incorrectly return @budget
after napi_complete_done() has been called.
This violates NAPI rules, because after napi_complete_done(),
current thread lost napi ownership.
Move the test against POLL_MODE before the napi_complete_done().
Fixes: c2d548cad1 ("idpf: add TX splitq napi poll support")
Reported-by: Peter Newman <peternewman@google.com>
Closes: https://lore.kernel.org/netdev/20250520121908.1805732-1-edumazet@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joshua Hay <joshua.a.hay@intel.com>
Cc: Alan Brady <alan.brady@intel.com>
Cc: Madhu Chittim <madhu.chittim@intel.com>
Cc: Phani Burra <phani.r.burra@intel.com>
Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Link: https://patch.msgid.link/20250520124030.1983936-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 293e38ff4e ]
SGMII_CTRL register, which specifies the active interface, was not
properly restored when resuming from suspend. This led to incorrect
interface selection after resume particularly in scenarios involving
the FPGA.
To fix this:
- Move the SGMII_CTRL setup out of the probe function.
- Initialize the register in the hardware initialization helper function,
which is called during both device initialization and resume.
This ensures the interface configuration is consistently restored after
suspend/resume cycles.
Fixes: a46d9d37c4 ("net: lan743x: Add support for SGMII interface")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20250516035719.117960-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47653e4243 ]
While the MDIO address of the internal PHY on Allwinner sun8i chips is
generally 1, of_mdio_parse_addr is used to cleanly parse the address
from the device-tree instead of hardcoding it.
A commit reworking the code ditched the parsed value and hardcoded the
value 1 instead, which didn't really break anything but is more fragile
and not future-proof.
Restore the initial behavior using the parsed address returned from the
helper.
Fixes: 634db83b82 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Link: https://patch.msgid.link/20250519164936.4172658-1-paulk@sys-base.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dabe349f7 ]
idpf_features_check is used to validate the TX packet. skb header
length is compared with the hardware supported value received from
the device control plane. The value is stored in the adapter structure
and to access it, vport pointer is used. During reset all the vports
are released and the vport pointer that the netdev private structure
points to is NULL.
To avoid null-ptr-deref, store the max header length value in netdev
private structure. This also helps to cache the value and avoid
accessing adapter pointer in hot path.
BUG: kernel NULL pointer dereference, address: 0000000000000068
...
RIP: 0010:idpf_features_check+0x6d/0xe0 [idpf]
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x154/0x520
? exc_page_fault+0x76/0x190
? asm_exc_page_fault+0x26/0x30
? idpf_features_check+0x6d/0xe0 [idpf]
netif_skb_features+0x88/0x310
validate_xmit_skb+0x2a/0x2b0
validate_xmit_skb_list+0x4c/0x70
sch_direct_xmit+0x19d/0x3a0
__dev_queue_xmit+0xb74/0xe70
...
Fixes: a251eee621 ("idpf: add SRIOV support and other ndo_ops")
Reviewed-by: Madhu Chititm <madhu.chittim@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c778f1b83 ]
If an aggregate has the following conditions:
- The SRIOV LAG DDP package has been enabled
- The bond is in 802.3ad LACP mode
- The bond is disqualified from supporting SRIOV VF LAG
- Both interfaces were added simultaneously to the bond (same command)
Then there is a chance that the two interfaces will be assigned different
LACP Aggregator ID's. This will cause a failure of the LACP control over
the bond.
To fix this, we can detect if the primary interface for the bond (as
defined by the driver) is not in switchdev mode, and exit the setup flow
if so.
Reproduction steps:
%> ip link add bond0 type bond mode 802.3ad miimon 100
%> ip link set bond0 up
%> ifenslave bond0 eth0 eth1
%> cat /proc/net/bonding/bond0 | grep Agg
Check for Aggregator IDs that differ.
Fixes: ec5a6c5f79 ("ice: process events created by lag netdev event handler")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbd95160a0 ]
The ice_vc_repr_add_mac() function indicates that it does not store the MAC
address filters in the firmware. However, it still increments vf->num_mac.
This is incorrect, as vf->num_mac should represent the number of MAC
filters currently programmed to firmware.
Indeed, we only perform this increment if the requested filter is a unicast
address that doesn't match the existing vf->hw_lan_addr. In addition,
ice_vc_repr_del_mac() does not decrement the vf->num_mac counter. This
results in the counter becoming out of sync with the actual count.
As it turns out, vf->num_mac is currently only used in legacy made without
port representors. The single place where the value is checked is for
enforcing a filter limit on untrusted VFs.
Upcoming patches to support VF Live Migration will use this value when
determining the size of the TLV for MAC address filters. Fix the
representor mode function to stop incrementing the counter incorrectly.
Fixes: ac19e03ef7 ("ice: allow process VF opcodes in different ways")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a57346652 ]
Wi-Fi connecting process don't need to assign to firmware slot control,
if assign firmware slot control for Wi-Fi connecting event, firmware will
not toggle slots because driver don't tell the slot schedule to firmware.
Wi-Fi connecting event end should also cancel the 4way handshake status.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250110015416.10704-3-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eeadc6baf8 ]
Currently, the driver allocates cacheable DMA buffers for the rx_tid
structure using kzalloc() and dma_map_single(). These buffers are
long-lived and can persist for the lifetime of the peer, which is not
advisable. Instead of using kzalloc() and dma_map_single() for allocating
cacheable DMA buffers, utilize the dma_alloc_noncoherent() helper for the
allocation of long-lived cacheable DMA buffers, such as the peer's rx_tid.
Since dma_alloc_noncoherent() returns unaligned physical and virtual
addresses, align them internally before use within the driver. This
ensures proper allocation of non-coherent memory through the kernel
helper.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Link: https://patch.msgid.link/20250119164219.647059-3-quic_ppranees@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6788a66600 ]
End offset for the monitor destination ring descriptor is defined as
16 bits, while the firmware definition specifies only 12 bits.
The remaining bits (bit 12 to bit 15) are reserved and may contain
junk values, leading to invalid information retrieval. Fix this issue
by updating the correct genmask values.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Link: https://patch.msgid.link/20241223060132.3506372-8-quic_ppranees@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24f587572a ]
Currently, ath12k_core_fetch_regdb() finds regdb.bin file through
board id's but in board-2.bin file regdb.bin file is present with
default board id because of which regdb.bin is not fetched.
Add support to fetch regdb.bin file from board-2.bin through
default board id.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Reviewed-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20250116032835.118397-1-quic_aarasahu@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfffb31751 ]
When using nvmem, ath9k could potentially be loaded before nvmem, which
loads after mtd. This is an issue if DT contains an nvmem mac address.
If nvmem is not ready in time for ath9k, -EPROBE_DEFER is returned. Pass
it to _probe so that ath9k can properly grab a potentially present MAC
address.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20241105222326.194417-1-rosenp@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df11edfba4 ]
Since inception there is an obvious typo laying around in
ath12k_hal_tx_cmd_ext_desc_setup(). Instead of initializing + adding
flags to tcl_ext_cmd->info1, we initialize + override. This will be needed
in the future to make broadcast frames work with ethernet encapsulation.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250127071306.1454699-1-nico.escande@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebfc9199df ]
To ensure where are protected by driver mutex can also be protected by
wiphy_lock(), so afterward we can remove driver mutex safely.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250122060310.31976-2-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00451eb3be ]
Some users want to plug two identical USB devices at the same time.
This static variable could theoretically cause them to use incorrect
TX power values.
Move the variable to the caller and pass a pointer to it to
rtw8822b_set_tx_power_index_by_rate().
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/8a60f581-0ab5-4d98-a97d-dd83b605008f@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d3e28feca ]
Occasionally there is an EPROTO error during firmware download.
This error is converted to EAGAIN in the download function.
But nobody tries again and so device probe fails.
Implement download retry to fix this.
This error was observed (and fix tested) on a tbs2910 board [1]
with an embedded RTL8188EU (0bda:8179) device behind a USB hub.
[1] arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
Signed-off-by: Soeren Moch <smoch@web.de>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250127194828.599379-1-smoch@web.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 268c73d470 ]
In case of MHI error a reset work will be queued which will try
napi_disable() after napi_synchronize().
As the napi will be only enabled after qmi_firmware_ready event,
trying napi_synchronize() before napi_enable() will result in
indefinite sleep in case of a firmware crash in QMI init sequence.
To avoid this, introduce napi_enabled flag to check if napi is enabled
or not before calling napi_synchronize().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Avula Sri Charan <quic_asrichar@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250124090058.3194299-1-quic_tamizhr@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ec7e1c86c ]
Do not warn on missing pad_data when oob is in sgl.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-9-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3a392bdd3 ]
Previous implementation assumes that there is 1:1 matching between
vectors and queues. It isn't always true.
Get minimum value from Rx/Tx queues to determine combined queues number.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8c2d3932c ]
It can be needed to have some MSI-X allocated as static and rest as
dynamic. For example on PF VSI. We want to always have minimum one MSI-X
on it, because of that it is allocated as a static one, rest can be
dynamic if it is supported.
Change the ice_get_irq_res() to allow using static entries if they are
free even if caller wants dynamic one.
Adjust limit values to the new approach. Min and max in limit means the
values that are valid, so decrease max and num_static by one.
Set vsi::irq_dyn_alloc if dynamic allocation is supported.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d67627e7b5 ]
Flow director needs only one MSI-X. Load it before RDMA to save MSI-X
for it.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6205f8215 ]
The 'used' and 'updated' fields in the FDB entry structure can be
accessed concurrently by multiple threads, leading to reports such as
[1]. Can be reproduced using [2].
Suppress these reports by annotating these accesses using
READ_ONCE() / WRITE_ONCE().
[1]
BUG: KCSAN: data-race in vxlan_xmit / vxlan_xmit
write to 0xffff942604d263a8 of 8 bytes by task 286 on cpu 0:
vxlan_xmit+0xb29/0x2380
dev_hard_start_xmit+0x84/0x2f0
__dev_queue_xmit+0x45a/0x1650
packet_xmit+0x100/0x150
packet_sendmsg+0x2114/0x2ac0
__sys_sendto+0x318/0x330
__x64_sys_sendto+0x76/0x90
x64_sys_call+0x14e8/0x1c00
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff942604d263a8 of 8 bytes by task 287 on cpu 2:
vxlan_xmit+0xadf/0x2380
dev_hard_start_xmit+0x84/0x2f0
__dev_queue_xmit+0x45a/0x1650
packet_xmit+0x100/0x150
packet_sendmsg+0x2114/0x2ac0
__sys_sendto+0x318/0x330
__x64_sys_sendto+0x76/0x90
x64_sys_call+0x14e8/0x1c00
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00000000fffbac6e -> 0x00000000fffbac6f
Reported by Kernel Concurrency Sanitizer on:
CPU: 2 UID: 0 PID: 287 Comm: mausezahn Not tainted 6.13.0-rc7-01544-gb4b270f11a02 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
[2]
#!/bin/bash
set +H
echo whitelist > /sys/kernel/debug/kcsan
echo !vxlan_xmit > /sys/kernel/debug/kcsan
ip link add name vx0 up type vxlan id 10010 dstport 4789 local 192.0.2.1
bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 198.51.100.1
taskset -c 0 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q &
taskset -c 2 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q &
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 689805dcc4 ]
When attempting to enable MQPRIO while HTB offload is already
configured, the driver currently returns `-EINVAL` and triggers a
`WARN_ON`, leading to an unnecessary call trace.
Update the code to handle this case more gracefully by returning
`-EOPNOTSUPP` instead, while also providing a helpful user message.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09717c28b7 ]
I realized when we were adding unicast addresses we were enabling
promiscuous mode. I did a bit of digging and realized we had overlooked
setting the driver private flag to indicate we supported unicast filtering.
Example below shows the table with 00deadbeef01 as the main NIC address,
and 5 additional addresses in the 00deadbeefX0 format.
# cat $dbgfs/mac_addr
Idx S TCAM Bitmap Addr/Mask
----------------------------------
00 0 00000000,00000000 000000000000
000000000000
01 0 00000000,00000000 000000000000
000000000000
02 0 00000000,00000000 000000000000
000000000000
...
24 0 00000000,00000000 000000000000
000000000000
25 1 00100000,00000000 00deadbeef50
000000000000
26 1 00100000,00000000 00deadbeef40
000000000000
27 1 00100000,00000000 00deadbeef30
000000000000
28 1 00100000,00000000 00deadbeef20
000000000000
29 1 00100000,00000000 00deadbeef10
000000000000
30 1 00100000,00000000 00deadbeef01
000000000000
31 0 00000000,00000000 000000000000
000000000000
Before rule 31 would be active. With this change it correctly sticks
to just the unicast filters.
Signed-off-by: Alexander Duyck <alexanderduyck@meta.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250204010038.1404268-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d078f5857a ]
Driver selects firmware by hardware version, which normally can be read
from registers before selecting firmware. However, certain chips such as
RTL8851B, it needs to read hardware version from efuse while doing
power_on, but do power_on after selecting firmware in current flow.
To resolve this flow problem, move power_on out from
rtw89_mac_partial_init(), and call rtw89_mac_pwr_on() separately at
proper places to have expected flow.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250203072911.47313-2-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f0efffd59 ]
A firmeware file contains multi-firmware with a header to represent
contents. The mfw_hdr->fw_nr is to define number of firmware in file.
+-----+-------+------+---------+--------------+
| sig | fw_nr | rsvd | version | reserved |
+---------------------------------------------+ --
fw 0 | cv | type | mp | rsvd | shift | size | rsvd | \
+---------------------------------------------+ |
fw 1 | cv | type | mp | rsvd | shift | size | rsvd | | mfw_hdr->fw_nr
+---------------------------------------------+ |
fw N-1 | ... | /
+=============================================+ --
| fw 0 content |
| (pointed by fw0 shift/size) |
+=============================================+
To avoid Coverity warning, validate header is in range of firmware size,
and also validate the range of actual firmware content is in range.
Addresses-Coverity-ID: 1494046 ("Untrusted loop bound")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250203072911.47313-4-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e4c4717b3 ]
If the slot duration is 0, the firmware timer will trigger timer hang at
the timer initializing state in a low rate due to hardware algorithm.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250205013233.10945-2-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8425f5c8f0 ]
Don't call ltecoex_read_reg() and ltecoex_reg_write() when the
ltecoex_addr member of struct rtw_chip_info is NULL. The RTL8814AU
doesn't have this feature.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/55b5641f-094e-4f94-9f79-ac053733f2cf@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e8243025c ]
After the firmware is uploaded, download_firmware_validate() checks some
bits in REG_MCUFW_CTRL to see if everything went okay. The
RTL8814AU power on sequence sets bits 13 and 12 to 2, which this
function does not expect, so it thinks the firmware upload failed.
Make download_firmware_validate() ignore bits 13 and 12.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/049d2887-22fc-47b7-9e59-62627cb525f8@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 848b09d53d ]
The Dell AW1022z is an RTL8156B based 2.5G Ethernet controller.
Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20250206224033.980115-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67800d2961 ]
The core is reset both in `fec_restart()` (called on link-up) and
`fec_stop()` (going to sleep, driver remove etc.). These two functions
had their separate implementations, which was at first only a register
write and a `udelay()` (and the accompanying block comment). However,
since then we got soft-reset (MAC disable) and Wake-on-LAN support, which
meant that these implementations diverged, often causing bugs.
For instance, as of now, `fec_stop()` does not check for
`FEC_QUIRK_NO_HARD_RESET`, meaning the MII/RMII mode is cleared on eg.
a PM power-down event; and `fec_restart()` missed the refactor renaming
the "magic" constant `1` to `FEC_ECR_RESET`.
To harmonize current implementations, and eliminate this source of
potential future bugs, refactor implementation to a common function.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250207121255.161146-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 696cca6430 ]
During reprobe, the sw state is being destroyd, and so is the
connection. When the peer STA is being removed, the opmode sends a
command to flush the TXQs of the STA and uses iwl_trans_wait_txq_empty.
This one warns if the FW is not alive, but it really shouldn't if
there is a FW error - and return silently instead, just like we do when
sending a hcmd.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250205145347.76425b10e5a0.I3bf0de2eb090a8b94c4e36d93dd91df61fadb808@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21e4d29ac0 ]
We shouldn't dump the reg_data here which dumps the last
entry again, it should use the imr_reg_data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.3313b18667d1.Iaa9ab66b1d397912a573525e060d39ea01b29d19@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dff4f278ee ]
Currently, ampdu id is update with peer id mask which is incorrect.
Therefore, update the ampdu id with PPDU id mask value. Also move
the ampdu_id field inside the user stats since it is a user id based
statistics.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250206013854.174765-7-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1d68ea58c ]
For the ECPF and representors, reduce the max MPWRQ size from 256KB (18)
to 128KB (17). This prepares the later patch for saving representor
memory.
With Striding RQ, there is a minimum of 4 MPWQEs. So with 128KB of max
MPWRQ size, the minimal memory is 4 * 128KB = 512KB. When creating page
pool, consider 1500 mtu, the minimal page pool size will be 512KB/4KB =
128 pages = 256 rx ring entries (2 entries per page).
Before this patch, setting RX ringsize (ethtool -G rx) to 256 causes
driver to allocate page pool size more than it needs due to max MPWRQ
is 256KB (18). Ex: 4 * 256KB = 1MB, 1MB/4KB = 256 pages, but actually
128 pages is good enough. Reducing the max MPWRQ to 128KB fixes the
limitation.
Signed-off-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250209101716.112774-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9cc8f9d70 ]
By experiments, a single queue representor netdev consumes kernel
memory around 2.8MB, and 1.8MB out of the 2.8MB is due to page
pool for the RXQ. Scaling to a thousand representors consumes 2.8GB,
which becomes a memory pressure issue for embedded devices such as
BlueField-2 16GB / BlueField-3 32GB memory.
Since representor netdevs mostly handles miss traffic, and ideally,
most of the traffic will be offloaded, reduce the default non-uplink
rep netdev's RXQ default depth from 1024 to 256 if mdev is ecpf eswitch
manager. This saves around 1MB of memory per regular RQ,
(1024 - 256) * 2KB, allocated from page pool.
With rxq depth of 256, the netlink page pool tool reports
$./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump page-pool-get
{'id': 277,
'ifindex': 9,
'inflight': 128,
'inflight-mem': 786432,
'napi-id': 775}]
This is due to mtu 1500 + headroom consumes half pages, so 256 rxq
entries consumes around 128 pages (thus create a page pool with
size 128), shown above at inflight.
Note that each netdev has multiple types of RQs, including
Regular RQ, XSK, PTP, Drop, Trap RQ. Since non-uplink representor
only supports regular rq, this patch only changes the regular RQ's
default depth.
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250209101716.112774-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a38cc5706f ]
By default, the mq netdev creates a pfifo_fast qdisc. On a
system with 16 core, the pfifo_fast with 3 bands consumes
16 * 3 * 8 (size of pointer) * 1024 (default tx queue len)
= 393KB. The patch sets the tx qlen to representor default
value, 128 (1<<MLX5E_REP_PARAMS_DEF_LOG_SQ_SIZE), which
consumes 16 * 3 * 8 * 128 = 49KB, saving 344KB for each
representor at ECPF.
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250209101716.112774-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95b9606b15 ]
Current loopback test validation ignores non-linear SKB case in
the SKB access, which can lead to failures in scenarios such as
when HW GRO is enabled.
Linearize the SKB so both cases will be handled.
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250209101716.112774-15-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a9304859b ]
In XDP scenarios, fragmented packets can occur if the MTU is larger
than the page size, even when the packet size fits within the linear
part.
If XDP multi-buffer support is disabled, the fragmented part won't be
handled in the TX flow, leading to packet drops.
Since XDP multi-buffer support is always available, this commit removes
the conditional check for enabling it.
This ensures that XDP multi-buffer support is always enabled,
regardless of the `is_xdp_mb` parameter, and guarantees the handling of
fragmented packets in such scenarios.
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250209101716.112774-16-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
