commit d3faab9b5a upstream.
If we sanitize error returns, the debug statements need
to come before that so that we don't lose information.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 405b0d6107 ("net: usb: aqc111: fix error handling of usbnet read calls")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 570896604f upstream.
This reverts commit 4fcfcbe457 ("wifi: mwifiex: Fix HT40 bandwidth
issue.")
That commit introduces a regression, when HT40 mode is enabled,
received packets are lost, this was experience with W8997 with both
SDIO-UART and SDIO-SDIO variants. From an initial investigation the
issue solves on its own after some time, but it's not clear what is
the reason. Given that this was just a performance optimization, let's
revert it till we have a better understanding of the issue and a proper
fix.
Cc: Jeff Chen <jeff.chen_1@nxp.com>
Cc: stable@vger.kernel.org
Fixes: 4fcfcbe457 ("wifi: mwifiex: Fix HT40 bandwidth issue.")
Closes: https://lore.kernel.org/all/20250603203337.GA109929@francesco-nb/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250605130302.55555-1-francesco@dolcini.it
[fix commit reference format]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1264971017 ]
netdevsim supports netpoll. Make sure we don't call napi_complete()
from it, since it may not be scheduled. Breno reports hitting a
warning in napi_complete_done():
WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560
__napi_poll+0x2d8/0x3a0
handle_softirqs+0x1fe/0x710
This is presumably after netpoll stole the SCHED bit prematurely.
Reported-by: Breno Leitao <leitao@debian.org>
Fixes: 3762ec05a9 ("netdevsim: add NAPI support")
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250611174643.2769263-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa9c44b842 ]
Previously, a unique tunnel id was added for the matching on TC
non-zero chains, to support inner header rewrite with goto action.
Later, it was used to support VF tunnel offload for vxlan, then for
Geneve and GRE. To support VF tunnel, a temporary mlx5_flow_spec is
used to parse tunnel options. For Geneve, if there is TLV option, a
object is created, or refcnt is added if already exists. But the
temporary mlx5_flow_spec is directly freed after parsing, which causes
the leak because no information regarding the object is saved in
flow's mlx5_flow_spec, which is used to free the object when deleting
the flow.
To fix the leak, call mlx5_geneve_tlv_option_del() before free the
temporary spec if it has TLV object.
Fixes: 521933cdc4 ("net/mlx5e: Support Geneve and GRE with VF tunnel offload")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ec40e3f1f ]
When attempting to add a rule to an existing flow group, if a matching
flow group exists but is not active, the error code returned should be
EAGAIN, so that the rule can be added to the matching flow group once
it is active, rather than ENOENT, which indicates that no matching
flow group was found.
Fixes: bd71b08ec2 ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f37258133c ]
When firmware asks the driver to allocate more pages, using event of
give_pages, the driver should always allocate it from same NUMA, the
original device NUMA. Current code uses dev_to_node() which can result
in different NUMA as it is changed by other driver flows, such as
mlx5_dma_zalloc_coherent_node(). Instead, use saved numa node for
allocating firmware pages.
Fixes: 311c7c71c9 ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 260388f79e ]
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via C45 (clause 45) mdiobus,
there is no verification of parameters passed to the ioctl and
it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before C45 read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 4e4aafcddb ("net: mdio: Add dedicated C45 API to MDIO bus drivers")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e62969412 ]
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via mdiobus, there is no verification of
parameters passed to the ioctl and it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 080bb352fa ("net: phy: Maintain MDIO device and bus statistics")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9816ec74e ]
According to 802.1AE standard, when ES and SC flags in TCI are zero,
used SCI should be the current active SC_RX. Current code uses the
header MAC address. Without this patch, when ES flag is 0 (using a
bridge or switch), header MAC will not fit the SCI and MACSec frames
will be discarted.
In order to test this issue, MACsec link should be stablished between
two interfaces, setting SC and ES flags to zero and a port identifier
different than one. For example, using ip macsec tools:
ip link add link $ETH0 macsec0 type macsec port 11 send_sci off
end_station off
ip macsec add macsec0 tx sa 0 pn 2 on key 01 $ETH1_KEY
ip macsec add macsec0 rx port 11 address $ETH1_MAC
ip macsec add macsec0 rx port 11 address $ETH1_MAC sa 0 pn 2 on key 02
ip link set dev macsec0 up
ip link add link $ETH1 macsec1 type macsec port 11 send_sci off
end_station off
ip macsec add macsec1 tx sa 0 pn 2 on key 01 $ETH0_KEY
ip macsec add macsec1 rx port 11 address $ETH0_MAC
ip macsec add macsec1 rx port 11 address $ETH0_MAC sa 0 pn 2 on key 02
ip link set dev macsec1 up
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Co-developed-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de>
Signed-off-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de>
Signed-off-by: Carlos Fernandez <carlos.fernandez@technica-engineering.de>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb4e9239e0 ]
When a VFLR interrupt is received during a VF reset initiated from a
different source, the VFLR may be not fully handled. This can
leave the VF in an undefined state.
To address this, set the I40E_VFLR_EVENT_PENDING bit again during VFLR
handling if the reset is not yet complete. This ensures the driver
will properly complete the VF reset in such scenarios.
Fixes: 52424f974b ("i40e: Fix VF hang when reset is triggered on another VF")
Signed-off-by: Robert Malz <robert.malz@canonical.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2c90d63b7 ]
The function i40e_vc_reset_vf attempts, up to 20 times, to handle a
VF reset request, using the return value of i40e_reset_vf as an indicator
of whether the reset was successfully triggered. Currently, i40e_reset_vf
always returns true, which causes new reset requests to be ignored if a
different VF reset is already in progress.
This patch updates the return value of i40e_reset_vf to reflect when
another VF reset is in progress, allowing the caller to properly use
the retry mechanism.
Fixes: 52424f974b ("i40e: Fix VF hang when reset is triggered on another VF")
Signed-off-by: Robert Malz <robert.malz@canonical.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7588a893cd ]
GCC_GCC_PCIE_HOT_RST is wrongly defined for WCN7850, causing kernel crash
on some specific platforms.
Since this register is divergent for WCN7850 and QCN9274, move it to
register table to allow different definitions. Then correct the register
address for WCN7850 to fix this issue.
Note IPQ5332 is not affected as it is not PCIe based device.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reported-by: Parth Pancholi <parth.pancholi@toradex.com>
Closes: https://lore.kernel.org/all/86899b2235a59c9134603beebe08f2bb0b244ea0.camel@gmail.com
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Link: https://patch.msgid.link/20250523-ath12k-wrong-global-reset-addr-v1-1-3b06eb556196@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0d226a608 ]
if ath11k_crypto_mode is invalid (not ATH11K_CRYPT_MODE_SW/ATH11K_CRYPT_MODE_HW),
ath11k_core_qmi_firmware_ready() will not undo some actions that was previously
started/configured. Do the validation as soon as possible in order to avoid
undoing actions in that case and also to fix the following smatch warning:
drivers/net/wireless/ath/ath11k/core.c:2166 ath11k_core_qmi_firmware_ready()
warn: missing unwind goto?
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202304151955.oqAetVFd-lkp@intel.com/
Fixes: aa2092a9ba ("ath11k: add raw mode and software crypto support")
Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250522200519.16858-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72610ed7d7 ]
Commit b488c76644 ("ath11k: report rssi of each chain to mac80211 for QCA6390/WCN6855")
and commit c3b39553fc ("ath11k: add signal report to mac80211 for QCA6390 and WCN6855")
call debugfs functions in mac ops. Those functions are no-ops if CONFIG_ATH11K_DEBUGFS is
not enabled, thus cause wrong status reported.
Move them to mac.c.
Besides, since WMI_REQUEST_RSSI_PER_CHAIN_STAT and WMI_REQUEST_VDEV_STAT stats could also
be requested via mac ops, process them directly in ath11k_update_stats_event().
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Fixes: b488c76644 ("ath11k: report rssi of each chain to mac80211 for QCA6390/WCN6855")
Fixes: c3b39553fc ("ath11k: add signal report to mac80211 for QCA6390 and WCN6855")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250220082448.31039-5-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b6d00fa88 ]
For WMI_REQUEST_VDEV_STAT request, firmware might split response into
multiple events dut to buffer limit, hence currently in
ath11k_debugfs_fw_stats_process() we wait until all events received.
In case there is no vdev started, this results in that below condition
would never get satisfied
((++ar->fw_stats.num_vdev_recvd) == total_vdevs_started)
finally the requestor would be blocked until wait time out.
The same applies to WMI_REQUEST_BCN_STAT request as well due to:
((++ar->fw_stats.num_bcn_recvd) == ar->num_started_vdevs)
Change to check the number of started vdev first: if it is zero, finish
wait directly; if not, follow the old way.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250220082448.31039-4-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bcf73b261 ]
Currently ath11k_debugfs_fw_stats_process() is using static variables to count
firmware stat events. Taking num_vdev as an example, if for whatever reason (
say ar->num_started_vdevs is 0 or firmware bug etc.) the following condition
(++num_vdev) == total_vdevs_started
is not met, is_end is not set thus num_vdev won't be cleared. Next time when
firmware stats is requested again, even if everything is working fine, we will
fail due to the condition above will never be satisfied.
The same applies to num_bcn as well.
Change to use non-static counters so that we have a chance to clear them each
time firmware stats is requested. Currently only ath11k_fw_stats_request() and
ath11k_debugfs_fw_stats_request() are requesting firmware stats, so clear
counters there.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Fixes: da3a9d3c15 ("ath11k: refactor debugfs code into debugfs.c")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250220082448.31039-3-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f6e82d11b ]
We get report [1] that CPU is running a hot loop in
ath11k_debugfs_fw_stats_request():
94.60% 0.00% i3status [kernel.kallsyms] [k] do_syscall_64
|
--94.60%--do_syscall_64
|
--94.55%--__sys_sendmsg
___sys_sendmsg
____sys_sendmsg
netlink_sendmsg
netlink_unicast
genl_rcv
netlink_rcv_skb
genl_rcv_msg
|
--94.55%--genl_family_rcv_msg_dumpit
__netlink_dump_start
netlink_dump
genl_dumpit
nl80211_dump_station
|
--94.55%--ieee80211_dump_station
sta_set_sinfo
|
--94.55%--ath11k_mac_op_sta_statistics
ath11k_debugfs_get_fw_stats
|
--94.55%--ath11k_debugfs_fw_stats_request
|
|--41.73%--_raw_spin_lock_bh
|
|--22.74%--__local_bh_enable_ip
|
|--9.22%--_raw_spin_unlock_bh
|
--6.66%--srso_alias_safe_ret
This is because, if for whatever reason ar->fw_stats_done is not set by
ath11k_update_stats_event(), ath11k_debugfs_fw_stats_request() won't yield
CPU before an up to 3s timeout.
Change to completion mechanism to avoid CPU burning.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Reported-by: Yury Vostrikov <mon@unformed.ru>
Closes: https://lore.kernel.org/all/7324ac7a-8b7a-42a5-aa19-de52138ff638@app.fastmail.com/ # [1]
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250220082448.31039-2-quic_bqiang@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b29425972c ]
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@@ constant C; @@
- msecs_to_jiffies(C * 1000)
+ secs_to_jiffies(C)
@@ constant C; @@
- msecs_to_jiffies(C * MSEC_PER_SEC)
+ secs_to_jiffies(C)
Link: https://lkml.kernel.org/r/20241210-converge-secs-to-jiffies-v3-14-ddfefd7e9f2a@linux.microsoft.com
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Daniel Mack <daniel@zonque.org>
Cc: David Airlie <airlied@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jeff Johnson <jjohnson@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Louis Peens <louis.peens@corigine.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Praveen Kaligineedi <pkaligineedi@google.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Shailend Chand <shailend@google.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Simon Horman <horms@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 9f6e82d11b ("wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1650d32b92 ]
In ath10k_snoc_hif_stop() we skip disabling the IRQs in the crash
recovery flow, but we still unconditionally call enable again in
ath10k_snoc_hif_start().
We can't check the ATH10K_FLAG_CRASH_FLUSH bit since it is cleared
before hif_start() is called, so instead check the
ATH10K_SNOC_FLAG_RECOVERY flag and skip enabling the IRQs during crash
recovery.
This fixes unbalanced IRQ enable splats that happen after recovering from
a crash.
Fixes: 0e622f67e0 ("ath10k: add support for WCN3990 firmware crash recovery")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20250318205043.1043148-1-caleb.connolly@linaro.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 692eb9f8a5 ]
When Linux sends out untagged traffic from a port, it will enter the CPU
port without any VLAN tag, even if the port is a member of a vlan
filtering bridge with a PVID egress untagged VLAN.
This makes the CPU port's PVID take effect, and the PVID's VLAN
table entry controls if the packet will be tagged on egress.
Since commit 45e9d59d39 ("net: dsa: b53: do not allow to configure
VLAN 0") we remove bridged ports from VLAN 0 when joining or leaving a
VLAN aware bridge. But we also clear the untagged bit, causing untagged
traffic from the controller to become tagged with VID 0 (and priority
0).
Fix this by not touching the untagged map of VLAN 0. Additionally,
always keep the CPU port as a member, as the untag map is only effective
as long as there is at least one member, and we would remove it when
bridging all ports and leaving no standalone ports.
Since Linux (and the switch) treats VLAN 0 tagged traffic like untagged,
the actual impact of this is rather low, but this also prevented earlier
detection of the issue.
Fixes: 45e9d59d39 ("net: dsa: b53: do not allow to configure VLAN 0")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250602194914.1011890-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db9ae3b6b4 ]
Enable threaded NAPI by default for WireGuard devices in response to low
performance behavior that we observed when multiple tunnels (and thus
multiple wg devices) are deployed on a single host. This affects any
kind of multi-tunnel deployment, regardless of whether the tunnels share
the same endpoints or not (i.e., a VPN concentrator type of gateway
would also be affected).
The problem is caused by the fact that, in case of a traffic surge that
involves multiple tunnels at the same time, the polling of the NAPI
instance of all these wg devices tends to converge onto the same core,
causing underutilization of the CPU and bottlenecking performance.
This happens because NAPI polling is hosted by default in softirq
context, but the WireGuard driver only raises this softirq after the rx
peer queue has been drained, which doesn't happen during high traffic.
In this case, the softirq already active on a core is reused instead of
raising a new one.
As a result, once two or more tunnel softirqs have been scheduled on
the same core, they remain pinned there until the surge ends.
In our experiments, this almost always leads to all tunnel NAPIs being
handled on a single core shortly after a surge begins, limiting
scalability to less than 3× the performance of a single tunnel, despite
plenty of unused CPU cores being available.
The proposed mitigation is to enable threaded NAPI for all WireGuard
devices. This moves the NAPI polling context to a dedicated per-device
kernel thread, allowing the scheduler to balance the load across all
available cores.
On our 32-core gateways, enabling threaded NAPI yields a ~4× performance
improvement with 16 tunnels, increasing throughput from ~13 Gbps to
~48 Gbps. Meanwhile, CPU usage on the receiver (which is the bottleneck)
jumps from 20% to 100%.
We have found no performance regressions in any scenario we tested.
Single-tunnel throughput remains unchanged.
More details are available in our Netdev paper.
Link: https://netdevconf.info/0x18/docs/netdev-0x18-paper23-talk-paper.pdf
Signed-off-by: Mirco Barone <mirco.barone@polito.it>
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250605120616.2808744-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 501fe52aa9 ]
Recent Qualcomm chipsets like SDX72/75 require MBIM sessionId mapping
to muxId in the range (0x70-0x8F) for the PCIe tethered use.
This has been partially addressed by the referenced commit, mapping
the default data call to muxId = 112, but the multiplexed data calls
scenario was not properly considered, mapping sessionId = 1 to muxId
1, while it should have been 113.
Fix this by moving the session_id assignment logic to mhi_mbim_newlink,
in order to map sessionId = n to muxId = n + WDS_BIND_MUX_DATA_PORT_MUX_ID.
Fixes: 65bc58c3dc ("net: wwan: mhi: make default data link id configurable")
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20250603091204.2802840-1-dnlplm@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ea0d42c19 ]
Add RGMII to supported interfaces for BCM63xx RGMII ports so they can be
actually used in RGMII mode.
Without this, phylink will fail to configure them:
[ 3.580000] b53-switch 10700000.switch GbE3 (uninitialized): validation of rgmii with support 0000000,00000000,00000000,000062ff and advertisement 0000000,00000000,00000000,000062ff failed: -EINVAL
[ 3.600000] b53-switch 10700000.switch GbE3 (uninitialized): failed to connect to PHY: -EINVAL
[ 3.610000] b53-switch 10700000.switch GbE3 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 4
Fixes: ce3bf94871 ("net: dsa: b53: add support for BCM63xx RGMIIs")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20250602193953.1010487-5-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4af523551d ]
bcm63xx's RGMII ports are always in MAC mode, never in PHY mode, so we
shouldn't enable any delays and let the PHY handle any delays as
necessary.
This fixes using RGMII ports with normal PHYs like BCM54612E, which will
handle the delay in the PHY.
Fixes: ce3bf94871 ("net: dsa: b53: add support for BCM63xx RGMIIs")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250602193953.1010487-3-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 919d763d60 ]
In MII mode, Tx lines are swapped for port0 and port1, which means
Tx port0 receives data from PRU1 and the Tx port1 receives data from
PRU0. This is an expected hardware behavior and reading the Tx stats
needs to be handled accordingly in the driver. Update the driver to
read Tx stats from the PRU1 for port0 and PRU0 for port1.
Fixes: c1e10d5dc7 ("net: ti: icssg-prueth: Add ICSSG Stats")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250603052904.431203-1-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12c331b29c ]
gve_alloc_pending_packet() can return NULL, but gve_tx_add_skb_dqo()
did not check for this case before dereferencing the returned pointer.
Add a missing NULL check to prevent a potential NULL pointer
dereference when allocation fails.
This improves robustness in low-memory scenarios.
Fixes: a57e5de476 ("gve: DQO: Add TX path")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 982d30c30e ]
Commit 3d010c8031 ("udp: do not accept non-tunnel GSO skbs landing
in a tunnel") added checks in linux stack to not accept non-tunnel
GRO packets landing in a tunnel. This exposed an issue in vmxnet3
which was not correctly reporting GRO packets for tunnel packets.
This patch fixes this issue by setting correct GSO type for the
tunnel packets.
Currently, vmxnet3 does not support reporting inner fields for LRO
tunnel packets. The issue is not seen for egress drivers that do not
use skb inner fields. The workaround is to enable tnl-segmentation
offload on the egress interfaces if the driver supports it. This
problem pre-exists this patch fix and can be addressed as a separate
future patch.
Fixes: dacce2be33 ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Link: https://patch.msgid.link/20250530152701.70354-1-ronak.doshi@broadcom.com
[pabeni@redhat.com: dropped the changelog]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 905fe0845b ]
When driver handles the napi rx polling requests, the netdev might
have been released by the dellink logic triggered by the disconnect
operation on user plane. However, in the logic of processing skb in
polling, an invalid netdev is still being used, which causes a panic.
BUG: kernel NULL pointer dereference, address: 00000000000000f1
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:dev_gro_receive+0x3a/0x620
[...]
Call Trace:
<IRQ>
? __die_body+0x68/0xb0
? page_fault_oops+0x379/0x3e0
? exc_page_fault+0x4f/0xa0
? asm_exc_page_fault+0x22/0x30
? __pfx_t7xx_ccmni_recv_skb+0x10/0x10 [mtk_t7xx (HASH:1400 7)]
? dev_gro_receive+0x3a/0x620
napi_gro_receive+0xad/0x170
t7xx_ccmni_recv_skb+0x48/0x70 [mtk_t7xx (HASH:1400 7)]
t7xx_dpmaif_napi_rx_poll+0x590/0x800 [mtk_t7xx (HASH:1400 7)]
net_rx_action+0x103/0x470
irq_exit_rcu+0x13a/0x310
sysvec_apic_timer_interrupt+0x56/0x90
</IRQ>
Fixes: 5545b7b9f2 ("net: wwan: t7xx: Add NAPI support")
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Link: https://patch.msgid.link/20250530031648.5592-1-jinjian.song@fibocom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbefe2ffa7 ]
If the ptp_rate recorded earlier in the driver happens to be 0, this
bogus value will propagate up to EST configuration, where it will
trigger a division by 0.
Prevent this division by 0 by adding the corresponding check and error
code.
Suggested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Fixes: 8572aec3d0 ("net: stmmac: Add basic EST support for XGMAC")
Link: https://patch.msgid.link/20250529-stmmac_tstamp_div-v4-2-d73340a794d5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 030ce919e1 ]
The stmmac platform drivers that do not open-code the clk_ptp_rate value
after having retrieved the default one from the device-tree can end up
with 0 in clk_ptp_rate (as clk_get_rate can return 0). It will
eventually propagate up to PTP initialization when bringing up the
interface, leading to a divide by 0:
Division by zero in kernel.
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.30-00001-g48313bd5768a #22
Hardware name: STM32 (Device Tree Support)
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x6c/0x8c
dump_stack_lvl from Ldiv0_64+0x8/0x18
Ldiv0_64 from stmmac_init_tstamp_counter+0x190/0x1a4
stmmac_init_tstamp_counter from stmmac_hw_setup+0xc1c/0x111c
stmmac_hw_setup from __stmmac_open+0x18c/0x434
__stmmac_open from stmmac_open+0x3c/0xbc
stmmac_open from __dev_open+0xf4/0x1ac
__dev_open from __dev_change_flags+0x1cc/0x224
__dev_change_flags from dev_change_flags+0x24/0x60
dev_change_flags from ip_auto_config+0x2e8/0x11a0
ip_auto_config from do_one_initcall+0x84/0x33c
do_one_initcall from kernel_init_freeable+0x1b8/0x214
kernel_init_freeable from kernel_init+0x24/0x140
kernel_init from ret_from_fork+0x14/0x28
Exception stack(0xe0815fb0 to 0xe0815ff8)
Prevent this division by 0 by adding an explicit check and error log
about the actual issue. While at it, remove the same check from
stmmac_ptp_register, which then becomes duplicate
Fixes: 19d857c903 ("stmmac: Fix calculations for ptp counters when clock input = 50Mhz.")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250529-stmmac_tstamp_div-v4-1-d73340a794d5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dc63d8ff1 ]
Mailbox operations are not possible while the driver is in reset.
Operations that require MBX exchange with the control plane will result
in long delays if executed while a reset is in progress:
ethtool -L <inf> combined 8& echo 1 > /sys/class/net/<inf>/device/reset
idpf 0000:83:00.0: HW reset detected
idpf 0000:83:00.0: Device HW Reset initiated
idpf 0000:83:00.0: Transaction timed-out (op:504 cookie:be00 vc_op:504 salt:be timeout:2000ms)
idpf 0000:83:00.0: Transaction timed-out (op:508 cookie:bf00 vc_op:508 salt:bf timeout:2000ms)
idpf 0000:83:00.0: Transaction timed-out (op:512 cookie:c000 vc_op:512 salt:c0 timeout:2000ms)
idpf 0000:83:00.0: Transaction timed-out (op:510 cookie:c100 vc_op:510 salt:c1 timeout:2000ms)
idpf 0000:83:00.0: Transaction timed-out (op:509 cookie:c200 vc_op:509 salt:c2 timeout:60000ms)
idpf 0000:83:00.0: Transaction timed-out (op:509 cookie:c300 vc_op:509 salt:c3 timeout:60000ms)
idpf 0000:83:00.0: Transaction timed-out (op:505 cookie:c400 vc_op:505 salt:c4 timeout:60000ms)
idpf 0000:83:00.0: Failed to configure queues for vport 0, -62
Disable mailbox communication in case of a reset, unless it's done during
a driver load, where the virtchnl operations are needed to configure the
device.
Fixes: 8077c72756 ("idpf: add controlq init and reset checks")
Co-developed-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7292af042b ]
Add a helper function to correctly handle the lockless
synchronization when the sender needs to block. The paradigm is
if (no_resources()) {
stop_queue();
barrier();
if (!no_resources())
restart_queue();
}
netif_subqueue_maybe_stop already handles the paradigm correctly, but
the code split the check for resources in three parts, the first one
(descriptors) followed the protocol, but the other two (completions and
tx_buf) were only doing the first part and so race prone.
Luckily netif_subqueue_maybe_stop macro already allows you to use a
function to evaluate the start/stop conditions so the fix only requires
the right helper function to evaluate all the conditions at once.
The patch removes idpf_tx_maybe_stop_common since it's no longer needed
and instead adjusts separately the conditions for singleq and splitq.
Note that idpf_tx_buf_hw_update doesn't need to check for resources
since that will be covered in idpf_tx_splitq_frame.
To reproduce:
Reduce the threshold for pending completions to increase the chances of
hitting this pause by changing your kernel:
drivers/net/ethernet/intel/idpf/idpf_txrx.h
-#define IDPF_TX_COMPLQ_OVERFLOW_THRESH(txcq) ((txcq)->desc_count >> 1)
+#define IDPF_TX_COMPLQ_OVERFLOW_THRESH(txcq) ((txcq)->desc_count >> 4)
Use pktgen to force the host to push small pkts very aggressively:
./pktgen_sample02_multiqueue.sh -i eth1 -s 100 -6 -d $IP -m $MAC \
-p 10000-10000 -t 16 -n 0 -v -x -c 64
Fixes: 6818c4d5b3 ("idpf: add splitq start_xmit")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Josh Hay <joshua.a.hay@intel.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73145e6d81 ]
The current implementation of the Tx scheduler allows the tree to be
rebuilt as the user adds more Tx queues to the VSI. In such a case,
additional child nodes are added to the tree to support the new number
of queues.
Unfortunately, this algorithm does not take into account that the limit
of the VSI support node may be exceeded, so an additional node in the
VSI layer may be required to handle all the requested queues.
Such a scenario occurs when adding XDP Tx queues on machines with many
CPUs. Although the driver still respects the queue limit returned by
the FW, the Tx scheduler was unable to add those queues to its tree
and returned one of the errors below.
Such a scenario occurs when adding XDP Tx queues on machines with many
CPUs (e.g. at least 321 CPUs, if there is already 128 Tx/Rx queue pairs).
Although the driver still respects the queue limit returned by the FW,
the Tx scheduler was unable to add those queues to its tree and returned
the following errors:
Failed VSI LAN queue config for XDP, error: -5
or:
Failed to set LAN Tx queue context, error: -22
Fix this problem by extending the tree rebuild algorithm to check if the
current VSI node can support the requested number of queues. If it
cannot, create as many additional VSI support nodes as necessary to
handle all the required Tx queues. Symmetrically, adjust the VSI node
removal algorithm to remove all nodes associated with the given VSI.
Also, make the search for the next free VSI node more restrictive. That is,
add queue group nodes only to the VSI support nodes that have a matching
VSI handle.
Finally, fix the comment describing the tree update algorithm to better
reflect the current scenario.
Fixes: b0153fdd7e ("ice: update VSI config dynamically")
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fa2942578 ]
The current implementation of the Tx scheduler tree attempts
to create nodes for all Tx queues, ignoring the fact that some
queues may already exist in the tree. For example, if the VSI
already has 128 Tx queues and the user requests for 16 new queues,
the Tx scheduler will compute the tree for 272 queues (128 existing
queues + 144 new queues), instead of 144 queues (128 existing queues
and 16 new queues).
Fix that by modifying the node count calculation algorithm to skip
the queues that already exist in the tree.
Fixes: 5513b920a4 ("ice: Update Tx scheduler tree for VSI multi-Tx queue support")
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0153f36041 ]
When the XDP program is loaded, the XDP callback adds new Tx queues.
This means that the callback must update the Tx scheduler with the new
queue number. In the event of a Tx scheduler failure, the XDP callback
should also fail and roll back any changes previously made for XDP
preparation.
The previous implementation had a bug that not all changes made by the
XDP callback were rolled back. This caused the crash with the following
call trace:
[ +9.549584] ice 0000:ca:00.0: Failed VSI LAN queue config for XDP, error: -5
[ +0.382335] Oops: general protection fault, probably for non-canonical address 0x50a2250a90495525: 0000 [#1] SMP NOPTI
[ +0.010710] CPU: 103 UID: 0 PID: 0 Comm: swapper/103 Not tainted 6.14.0-net-next-mar-31+ #14 PREEMPT(voluntary)
[ +0.010175] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022
[ +0.010946] RIP: 0010:__ice_update_sample+0x39/0xe0 [ice]
[...]
[ +0.002715] Call Trace:
[ +0.002452] <IRQ>
[ +0.002021] ? __die_body.cold+0x19/0x29
[ +0.003922] ? die_addr+0x3c/0x60
[ +0.003319] ? exc_general_protection+0x17c/0x400
[ +0.004707] ? asm_exc_general_protection+0x26/0x30
[ +0.004879] ? __ice_update_sample+0x39/0xe0 [ice]
[ +0.004835] ice_napi_poll+0x665/0x680 [ice]
[ +0.004320] __napi_poll+0x28/0x190
[ +0.003500] net_rx_action+0x198/0x360
[ +0.003752] ? update_rq_clock+0x39/0x220
[ +0.004013] handle_softirqs+0xf1/0x340
[ +0.003840] ? sched_clock_cpu+0xf/0x1f0
[ +0.003925] __irq_exit_rcu+0xc2/0xe0
[ +0.003665] common_interrupt+0x85/0xa0
[ +0.003839] </IRQ>
[ +0.002098] <TASK>
[ +0.002106] asm_common_interrupt+0x26/0x40
[ +0.004184] RIP: 0010:cpuidle_enter_state+0xd3/0x690
Fix this by performing the missing unmapping of XDP queues from
q_vectors and setting the XDP rings pointer back to NULL after all those
queues are released.
Also, add an immediate exit from the XDP callback in case of ring
preparation failure.
Fixes: efc2214b60 ("ice: Add support for XDP")
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27eab4c644 ]
When running these commands on DUT (and similar at the other end)
ip link set dev eth0 up
ip link add link eth0 name eth0.10 type vlan id 10
ip addr add 10.0.0.1/24 dev eth0.10
ip link set dev eth0.10 up
ping 10.0.0.2
The ping will fail.
The reason why is failing is because, the network interfaces for lan966x
have a flag saying that the HW can insert the vlan tags into the
frames(NETIF_F_HW_VLAN_CTAG_TX). Meaning that the frames that are
transmitted don't have the vlan tag inside the skb data, but they have
it inside the skb. We already get that vlan tag and put it in the IFH
but the problem is that we don't configure the HW to rewrite the frame
when the interface is in host mode.
The fix consists in actually configuring the HW to insert the vlan tag
if it is different than 0.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Fixes: 6d2c186afa ("net: lan966x: Add vlan support.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250528093619.3738998-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54d34165b4 ]
The "freq" variable is in terms of MHz and "max_val_cycles" is in terms
of Hz. The fact that "max_val_cycles" is a u64 suggests that support
for high frequency is intended but the "freq_khz * 1000" would overflow
the u32 type if we went above 4GHz. Use unsigned long long type for the
mutliplication to prevent that.
Fixes: 31c128b66e ("net/mlx4_en: Choose time-stamping shift value according to HW frequency")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aDbFHe19juIJKjsb@stanley.mountain
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba99c627aa ]
Identify the cause of the suspend/resume hang: netif_carrier_off()
is called during link state changes and becomes stuck while
executing linkwatch_work().
To resolve this issue, call netif_device_detach() during the Ethernet
suspend process to temporarily detach the network device from the
kernel and prevent the suspend/resume hang.
Fixes: 8c7bd5a454 ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: Yanqing Wang <ot_yanqing.wang@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Link: https://patch.msgid.link/20250528075351.593068-1-macpaul.lin@mediatek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f41a94aade ]
Previously, the RX_BUFFERS_POSTED stat incorrectly reported the
fill_cnt from RX queue 0 for all queues, resulting in inaccurate
per-queue statistics.
Fix this by correctly indexing priv->rx[idx].fill_cnt for each RX queue.
Fixes: 24aeb56f2d ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250527130830.1812903-1-alok.a.tiwari@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb7fd7aa35 ]
bus_id is currently derived from the ethernetX alias. If one is missing
for the device, 0 is used. If ethernet0 points to another stmmac device
or if there are 2+ stmmac devices without an ethernet alias, then bus_id
will be 0 for all of those.
This is an issue because the bus_id is used to generate the mdio bus id
(new_bus->id in drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
stmmac_mdio_register) and this needs to be unique.
This allows to avoid needing to define ethernet aliases for devices with
multiple stmmac controllers (such as the Rockchip RK3588) for multiple
stmmac devices to probe properly.
Obviously, the bus_id isn't guaranteed to be stable across reboots if no
alias is set for the device but that is easily fixed by simply adding an
alias if this is desired.
Fixes: 25c83b5c2e ("dt:net:stmmac: Add support to dwmac version 3.610 and 3.710")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250527-stmmac-mdio-bus_id-v2-1-a5ca78454e3c@cherry.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57a92d1465 ]
We have noticed that when PHY timestamping is enabled, L2 frames seems
to be modified by changing two 2 bytes with a value of 0. The place were
these 2 bytes seems to be random(or I couldn't find a pattern). In most
of the cases the userspace can ignore these frames but if for example
those 2 bytes are in the correction field there is nothing to do. This
seems to happen when configuring the HW for IPv4 even that the flow is
not enabled.
These 2 bytes correspond to the UDPv4 checksum and once we don't enable
clearing the checksum when using L2 frames then the frame doesn't seem
to be changed anymore.
Fixes: 7d272e63e0 ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250523082716.2935895-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67af4ec948 ]
This patch addresses below issues,
1. Active traffic on the leaf node must be stopped before its send queue
is reassigned to the parent. This patch resolves the issue by marking
the node as 'Inner'.
2. During a system reboot, the interface receives TC_HTB_LEAF_DEL
and TC_HTB_LEAF_DEL_LAST callbacks to delete its HTB queues.
In the case of TC_HTB_LEAF_DEL_LAST, although the same send queue
is reassigned to the parent, the current logic still attempts to update
the real number of queues, leadning to below warnings
New queues can't be registered after device unregistration.
WARNING: CPU: 0 PID: 6475 at net/core/net-sysfs.c:1714
netdev_queue_update_kobjects+0x1e4/0x200
Fixes: 5e6808b4c6 ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250522115842.1499666-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 479c580160 ]
QOS is designed to create a new send queue whenever a class
is created, ensuring proper shaping and scheduling. However,
when multiple send queues are created and deleted in a loop,
SMMU errors are observed.
This patch addresses the issue by performing an data cache sync
during the teardown of QOS send queues.
Fixes: ab6dddd2a6 ("octeontx2-pf: qos send queues management")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250522094742.1498295-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 846992645b ]
Fix memory leak when running one-step timestamping. When running
one-step sync timestamping, the HW is configured to insert the TX time
into the frame, so there is no reason to keep the skb anymore. As in
this case the HW will never generate an interrupt to say that the frame
was timestamped, then the frame will never released.
Fix this by freeing the frame in case of one-step timestamping.
Fixes: 7d272e63e0 ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250522115722.2827199-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82d1096ca8 ]
Remove lan743x_phy_init from lan743x_hardware_init as it resets the PHY
registers, causing WOL to fail on subsequent attempts. Add a call to
lan743x_hw_reset_phy in the probe function to ensure the PHY is reset
during device initialization.
Fixes: 23f0703c12 ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250526053048.287095-3-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68927eb52d ]
rename the function to lan743x_hw_reset_phy to better describe it
operation.
Fixes: 23f0703c12 ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250526053048.287095-2-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
