[ Upstream commit 840738eae9 ]
Commit 8bd25b61c5 ("smb: client: set correct d_type for reparse DFS/DFSR
and mount point") deduplicated assignment of fattr->cf_dtype member from
all places to end of the function cifs_reparse_point_to_fattr(). The only
one missing place which was not deduplicated is wsl_to_fattr(). Fix it.
Fixes: 8bd25b61c5 ("smb: client: set correct d_type for reparse DFS/DFSR and mount point")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 34331d7bee upstream.
after fabc4ed200, server_unresponsive add a condition to check whether client
need to reconnect depending on server->lstrp. When client failed to reconnect
for some time and abort connection, server->lstrp is updated for the last time.
In the following scene, server->lstrp is too old. This cause next command
failure in re-negotiation rather than waiting for re-negotiation done.
1. mount -t cifs -o username=Everyone,echo_internal=10 //$server_ip/export /mnt
2. ssh $server_ip "echo b > /proc/sysrq-trigger &"
3. ls /mnt
4. sleep 21s
5. ssh $server_ip "service firewalld stop"
6. ls # return EHOSTDOWN
If the interval between 5 and 6 is too small, 6 may trigger sending negotiation
request. Before backgrounding cifsd thread try to receive negotiation response
from server in cifs_readv_from_socket, server_unresponsive may trigger
cifs_reconnect which cause 6 to be failed:
ls thread
----------------
smb2_negotiate
server->tcpStatus = CifsInNegotiate
compound_send_recv
wait_for_compound_request
cifsd thread
----------------
cifs_readv_from_socket
server_unresponsive
server->tcpStatus == CifsInNegotiate && jiffies > server->lstrp + 20s
cifs_reconnect
cifs_abort_connection: mid_state = MID_RETRY_NEEDED
ls thread
----------------
cifs_sync_mid_result return EAGAIN
smb2_negotiate return EHOSTDOWN
Though server->lstrp means last server response time, it is updated in
cifs_abort_connection and cifs_get_tcp_session. We can also update server->lstrp
before switching into CifsInNegotiate state to avoid failure in 6.
Fixes: 7ccc146546 ("smb: client: fix hang in wait_for_response() for negproto")
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Acked-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: zhangjian <zhangjian496@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2182743a8 upstream.
Under low-memory conditions, close_all_cached_dirs() can't move the
dentries to a separate list to dput() them once the locks are dropped.
This will result in a "Dentry still in use" error, so add an error
message that makes it clear this is what happened:
[ 495.281119] CIFS: VFS: \\otters.example.com\share Out of memory while dropping dentries
[ 495.281595] ------------[ cut here ]------------
[ 495.281887] BUG: Dentry ffff888115531138{i=78,n=/} still in use (2) [unmount of cifs cifs]
[ 495.282391] WARNING: CPU: 1 PID: 2329 at fs/dcache.c:1536 umount_check+0xc8/0xf0
Also, bail out of looping through all tcons as soon as a single
allocation fails, since we're already in trouble, and kmalloc() attempts
for subseqeuent tcons are likely to fail just like the first one did.
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Acked-by: Bharath SM <bharathsm@microsoft.com>
Suggested-by: Ruben Devos <rdevos@oxya.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a89f5fae99 ]
free_transport function for tcp connection can be called from smbdirect.
It will cause kernel oops. This patch add free_transport ops in ksmbd
connection, and add each free_transports for tcp and smbdirect.
Fixes: 21a4e47578 ("ksmbd: fix use-after-free in __smb2_lease_break_noti()")
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 306cb65bb0 upstream.
When mounting a share with kerberos authentication with multichannel
support, share mounts correctly, but fails to create secondary
channels. This occurs because the hostname is not populated when
adding the channels. The hostname is necessary for the userspace
cifs.upcall program to retrieve the required credentials and pass
it back to kernel, without hostname secondary channels fails
establish.
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reported-by: xfuren <xfuren@gmail.com>
Link: https://bugzilla.samba.org/show_bug.cgi?id=15824
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ac5b66aca upstream.
If client set ->PreviousSessionId on kerberos session setup stage,
NULL pointer dereference error will happen. Since sess->user is not
set yet, It can pass the user argument as NULL to destroy_previous_session.
sess->user will be set in ksmbd_krb5_authenticate(). So this patch move
calling destroy_previous_session() after ksmbd_krb5_authenticate().
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27391
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72dd7961a4 upstream.
Currently, cached directory contents were not reused across subsequent
'ls' operations because the cache validity check relied on comparing
the ctx pointer, which changes with each readdir invocation. As a
result, the cached dir entries was not marked as valid and the cache was
not utilized for subsequent 'ls' operations.
This change uses the file pointer, which remains consistent across all
readdir calls for a given directory instance, to associate and validate
the cache. As a result, cached directory contents can now be
correctly reused, improving performance for repeated directory listings.
Performance gains with local windows SMB server:
Without the patch and default actimeo=1:
1000 directory enumeration operations on dir with 10k files took 135.0s
With this patch and actimeo=0:
1000 directory enumeration operations on dir with 10k files took just 5.1s
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42ca547b13 upstream.
When a server has multichannel enabled, we keep polling the server
for interfaces periodically. However, when this query fails, we
disable the polling. This can be problematic as it takes away the
chance for the server to start advertizing again.
This change reschedules the delayed work, even if the current call
failed. That way, multichannel sessions can recover.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5e3e6e28c upstream.
Today, during smb2_reconnect, session_mutex is released as soon as
the tcon is reconnected and is in a good state. However, in case
multichannel is enabled, there is also a query of server interfaces that
follows. We've seen that this query can race with reconnects of other
channels, causing them to step on each other with reconnects.
This change extends the hold of session_mutex till after the query of
server interfaces is complete. In order to avoid recursive smb2_reconnect
checks during query ioctl, this change also introduces a session flag
for sessions where such a query is in progress.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66d590b828 upstream.
Our current approach to select a channel for sending requests is this:
1. iterate all channels to find the min and max queue depth
2. if min and max are not the same, pick the channel with min depth
3. if min and max are same, round robin, as all channels are equally loaded
The problem with this approach is that there's a lag between selecting
a channel and sending the request (that increases the queue depth on the channel).
While these numbers will eventually catch up, there could be a skew in the
channel usage, depending on the application's I/O parallelism and the server's
speed of handling requests.
With sufficient parallelism, this lag can artificially increase the queue depth,
thereby impacting the performance negatively.
This change will change the step 1 above to start the iteration from the last
selected channel. This is to reduce the skew in channel usage even in the presence
of this lag.
Fixes: ea90708d3c ("cifs: use the least loaded channel for sending requests")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1e7a277a1 upstream.
page is checked for null in __build_path_from_dentry_optional_prefix
when tcon->origin_fullpath is not set. However, the check is missing when
it is set.
Add a check to prevent a potential NULL pointer dereference.
Signed-off-by: Ruben Devos <devosruben6@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4f60a053a upstream.
When calling cifs_reconnect, before the connection to the
server is reestablished, the code today does a DNS resolution and
updates server->dstaddr.
However, this is not necessary for secondary channels. Secondary
channels use the interface list returned by the server to decide
which address to connect to. And that happens after tcon is reconnected
and server interfaces are requested.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c184689399 upstream.
When the server interface info changes (more common in clustered
servers like Azure Files), the per-channel iface gets updated.
However, this did not update the corresponding dstaddr. As a result
these channels will still connect (or try connecting) to older addresses.
Fixes: b54034a73b ("cifs: during reconnect, update interface if necessary")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f396b9bfe upstream.
cifs_reconnect can be called with a flag to mark the session as needing
reconnect too. When this is done, we expect the connections of all
channels to be reconnected too, which is not happening today.
Without doing this, we have seen bad things happen when primary and
secondary channels are connected to different servers (in case of cloud
services like Azure Files SMB).
This change would force all connections to reconnect as well, not just
the sessions and tcons.
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 56e84c64fc ]
Validate the SMB1 query reparse point response per [MS-CIFS] section
2.2.7.2 NT_TRANSACT_IOCTL.
NT_TRANSACT_IOCTL response contains one word long setup data after which is
ByteCount member. So check that SetupCount is 1 before trying to read and
use ByteCount member.
Output setup data contains ReturnedDataLen member which is the output
length of executed IOCTL command by remote system. So check that output was
not truncated before transferring over network.
Change MaxSetupCount of NT_TRANSACT_IOCTL request from 4 to 1 as io_rsp
structure already expects one word long output setup data. This should
prevent server sending incompatible structure (in case it would be extended
in future, which is unlikely).
Change MaxParameterCount of NT_TRANSACT_IOCTL request from 2 to 0 as
NT IOCTL does not have any documented output parameters and this function
does not parse any output parameters at all.
Fixes: ed3e0a149b ("smb: client: implement ->query_reparse_point() for SMB1")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10379171f3 ]
The list_first_entry() macro never returns NULL. If the list is
empty then it returns an invalid pointer. Use list_first_entry_or_null()
to check if the list is empty.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505080231.7OXwq4Te-lkp@intel.com/
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f4bbedd4e ]
If there is no stream data in file, v_len is zero.
So, If position(*pos) is zero, stream write will fail
due to stream write position validation check.
This patch reorganize stream write position validation.
Fixes: 0ca6df4f40 ("ksmbd: prevent out-of-bounds stream writes by validating *pos")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e48f9d849b upstream.
Multiple pointers in struct cifs_search_info (ntwrk_buf_start,
srch_entries_start, and last_entry) point to the same allocated buffer.
However, when freeing this buffer, only ntwrk_buf_start was set to NULL,
while the other pointers remained pointing to freed memory.
This is defensive programming to prevent potential issues with stale
pointers. While the active UAF vulnerability is fixed by the previous
patch, this change ensures consistent pointer state and more robust error
handling.
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f122121796 ]
Function CIFSSMBSetPathInfo() is not supported by non-NT servers and
returns error. Fallback code via open filehandle and CIFSSMBSetFileInfo()
does not work neither because CIFS_open() works also only on NT server.
Therefore currently the whole smb_set_file_info() function as a SMB1
callback for the ->set_file_info() does not work with older non-NT SMB
servers, like Win9x and others.
This change implements fallback code in smb_set_file_info() which will
works with any server and allows to change time values and also to set or
clear read-only attributes.
To make existing fallback code via CIFSSMBSetFileInfo() working with also
non-NT servers, it is needed to change open function from CIFS_open()
(which is NT specific) to cifs_open_file() which works with any server
(this is just a open wrapper function which choose the correct open
function supported by the server).
CIFSSMBSetFileInfo() is working also on non-NT servers, but zero time
values are not treated specially. So first it is needed to fill all time
values if some of them are missing, via cifs_query_path_info() call.
There is another issue, opening file in write-mode (needed for changing
attributes) is not possible when the file has read-only attribute set.
The only option how to clear read-only attribute is via SMB_COM_SETATTR
command. And opening directory is not possible neither and here the
SMB_COM_SETATTR command is the only option how to change attributes.
And CIFSSMBSetFileInfo() does not honor setting read-only attribute, so
for setting is also needed to use SMB_COM_SETATTR command.
Existing code in cifs_query_path_info() is already using SMB_COM_GETATTR as
a fallback code path (function SMBQueryInformation()), so introduce a new
function SMBSetInformation which will implement SMB_COM_SETATTR command.
My testing showed that Windows XP SMB1 client is also using SMB_COM_SETATTR
command for setting or clearing read-only attribute against non-NT server.
So this can prove that this is the correct way how to do it.
With this change it is possible set all 4 time values and all attributes,
including clearing and setting read-only bit on non-NT SMB servers.
Tested against Win98 SMB1 server.
This change fixes "touch" command which was failing when called on existing
file. And fixes also "chmod +w" and "chmod -w" commands which were also
failing (as they are changing read-only attribute).
Note that this change depends on following change
"cifs: Improve cifs_query_path_info() and cifs_query_file_info()"
as it require to query all 4 time attribute values.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1041c117a2 ]
When CAP_NT_SMBS was not negotiated then do not issue CIFSSMBQPathInfo()
and CIFSSMBQFileInfo() commands. CIFSSMBQPathInfo() is not supported by
non-NT Win9x SMB server and CIFSSMBQFileInfo() returns from Win9x SMB
server bogus data in Attributes field (for example lot of files are marked
as reparse points, even Win9x does not support them and read-only bit is
not marked for read-only files). Correct information is returned by
CIFSFindFirst() or SMBQueryInformation() command.
So as a fallback in cifs_query_path_info() function use CIFSFindFirst()
with SMB_FIND_FILE_FULL_DIRECTORY_INFO level which is supported by both NT
and non-NT servers and as a last option use SMBQueryInformation() as it was
before.
And in function cifs_query_file_info() immediately returns -EOPNOTSUPP when
not communicating with NT server. Client then revalidate inode entry by the
cifs_query_path_info() call, which is working fine. So fstat() syscall on
already opened file will receive correct information.
Note that both fallback functions in non-UNICODE mode expands wildcards.
Therefore those fallback functions cannot be used on paths which contain
SMB wildcard characters (* ? " > <).
CIFSFindFirst() returns all 4 time attributes as opposite of
SMBQueryInformation() which returns only one.
With this change it is possible to query all 4 times attributes from Win9x
server and at the same time, client minimize sending of unsupported
commands to server.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af5226abb4 ]
xa_store() may fail so check its return value and return error code if
error occurred.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 781802aa5a ]
Function ip_rfc1001_connect() which establish NetBIOS session for SMB
connections, currently uses smb_send() function for sending NetBIOS Session
Request packet. This function expects that the passed buffer is SMB packet
and for SMB2+ connections it mangles packet header, which breaks prepared
NetBIOS Session Request packet. Result is that this function send garbage
packet for SMB2+ connection, which SMB2+ server cannot parse. That function
is not mangling packets for SMB1 connections, so it somehow works for SMB1.
Fix this problem and instead of smb_send(), use smb_send_kvec() function
which does not mangle prepared packet, this function send them as is. Just
API of this function takes struct msghdr (kvec) instead of packet buffer.
[MS-SMB2] specification allows SMB2 protocol to use NetBIOS as a transport
protocol. NetBIOS can be used over TCP via port 139. So this is a valid
configuration, just not so common. And even recent Windows versions (e.g.
Windows Server 2022) still supports this configuration: SMB over TCP port
139, including for modern SMB2 and SMB3 dialects.
This change fixes SMB2 and SMB3 connections over TCP port 139 which
requires establishing of NetBIOS session. Tested that this change fixes
establishing of SMB2 and SMB3 connections with Windows Server 2022.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eeb827f292 ]
cifs.ko is missing validation check when accessing smb_aces.
This patch add validation check for the fields in smb_aces.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be786e509c ]
Windows SMB servers (including SMB2+) which are working over RFC1001
require that Netbios server name specified in RFC1001 Session Request
packet is same as the UNC host name. Netbios server name can be already
specified manually via -o servern= option.
With this change the RFC1001 server name is set automatically by extracting
the hostname from the mount source.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 287906b200 ]
During mount option processing and negotiation with the server, the
original user-specified rsize/wsize values were being modified directly.
This makes it impossible to recover these values after a connection
reset, leading to potential degraded performance after reconnection.
The other problem is that When negotiating read and write sizes, there are
cases where the negotiated values might calculate to zero, especially
during reconnection when server->max_read or server->max_write might be
reset. In general, these values come from the negotiation response.
According to MS-SMB2 specification, these values should be at least 65536
bytes.
This patch improves IO parameter handling:
1. Adds vol_rsize and vol_wsize fields to store the original user-specified
values separately from the negotiated values
2. Uses got_rsize/got_wsize flags to determine if values were
user-specified rather than checking for non-zero values, which is more
reliable
3. Adds a prevent_zero_iosize() helper function to ensure IO sizes are
never negotiated down to zero, which could happen in edge cases like
when server->max_read/write is zero
The changes make the CIFS client more resilient to unusual server
responses and reconnection scenarios, preventing potential failures
when IO sizes are calculated to be zero.
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e94e882a6d ]
SMB negotiate retry functionality in cifs_negotiate() is currently broken
and does not work when doing socket reconnect. Caller of this function,
which is cifs_negotiate_protocol() requires that tcpStatus after successful
execution of negotiate callback stay in CifsInNegotiate. But if the
CIFSSMBNegotiate() called from cifs_negotiate() fails due to connection
issues then tcpStatus is changed as so repeated CIFSSMBNegotiate() call
does not help.
Fix this problem by moving retrying code from negotiate callback (which is
either cifs_negotiate() or smb2_negotiate()) to cifs_negotiate_protocol()
which is caller of those callbacks. This allows to properly handle and
implement correct transistions between tcpStatus states as function
cifs_negotiate_protocol() already handles it.
With this change, cifs_negotiate_protocol() now handles also -EAGAIN error
set by the RFC1002_NEGATIVE_SESSION_RESPONSE processing after reconnecting
with NetBIOS session.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4236ac9fe5 ]
Old SMB1 servers without CAP_NT_SMBS do not support CIFS_open() function
and instead SMBLegacyOpen() needs to be used. This logic is already handled
in cifs_open_file() function, which is server->ops->open callback function.
So for querying and creating MF symlinks use open callback function instead
of CIFS_open() function directly.
This change fixes querying and creating new MF symlinks on Windows 98.
Currently cifs_query_mf_symlink() is not able to detect MF symlink and
cifs_create_mf_symlink() is failing with EIO error.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e255612b5e ]
Some operations, like WRITE, does not require FILE_READ_ATTRIBUTES access.
So when FILE_READ_ATTRIBUTES is not explicitly requested for
smb2_open_file() then first try to do SMB2 CREATE with FILE_READ_ATTRIBUTES
access (like it was before) and then fallback to SMB2 CREATE without
FILE_READ_ATTRIBUTES access (less common case).
This change allows to complete WRITE operation to a file when it does not
grant FILE_READ_ATTRIBUTES permission and its parent directory does not
grant READ_DATA permission (parent directory READ_DATA is implicit grant of
child FILE_READ_ATTRIBUTES permission).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit db363b0a1d upstream.
In the current implementation, the SMB filesystem on a mount point can
trigger upcalls from the kernel to the userspace to enable certain
functionalities like spnego, dns_resolution, amongst others. These upcalls
usually either happen in the context of the mount or in the context of an
application/user. The upcall handler for cifs, cifs.upcall already has
existing code which switches the namespaces to the caller's namespace
before handling the upcall. This behaviour is expected for scenarios like
multiuser mounts, but might not cover all single user scenario with
services such as Kubernetes, where the mount can happen from different
locations such as on the host, from an app container, or a driver pod
which does the mount on behalf of a different pod.
This patch introduces a new mount option called upcall_target, to
customise the upcall behaviour. upcall_target can take 'mount' and 'app'
as possible values. This aids use cases like Kubernetes where the mount
happens on behalf of the application in another container altogether.
Having this new mount option allows the mount command to specify where the
upcall should happen: 'mount' for resolving the upcall to the host
namespace, and 'app' for resolving the upcall to the ns of the calling
thread. This will enable both the scenarios where the Kerberos credentials
can be found on the application namespace or the host namespace to which
just the mount operation is "delegated".
Reviewed-by: Shyam Prasad <shyam.prasad@microsoft.com>
Reviewed-by: Bharath S M <bharathsm@microsoft.com>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1fe4a44b7f upstream.
The response buffer for the CREATE request handled by smb311_posix_mkdir()
is leaked on the error path (goto err_free_rsp_buf) because the structure
pointer *rsp passed to free_rsp_buf() is not assigned until *after* the
error condition is checked.
As *rsp is initialised to NULL, free_rsp_buf() becomes a no-op and the leak
is instead reported by __kmem_cache_shutdown() upon subsequent rmmod of
cifs.ko if (and only if) the error path has been hit.
Pass rsp_iov.iov_base to free_rsp_buf() instead, similar to the code in
other functions in smb2pdu.c for which *rsp is assigned late.
Cc: stable@vger.kernel.org
Signed-off-by: Jethro Donaldson <devel@jro.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ca02e63ed upstream.
A pre-existing valid cfid returned from find_or_create_cached_dir might
race with a lease break, meaning open_cached_dir doesn't consider it
valid, and thinks it's newly-constructed. This leaks a dentry reference
if the allocation occurs before the queued lease break work runs.
Avoid the race by extending holding the cfid_list_lock across
find_or_create_cached_dir and when the result is checked.
Cc: stable@vger.kernel.org
Reviewed-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eb4447bcce ]
The previous patch that added bounds check for create lease context
introduced a memory leak. When the bounds check fails, the function
returns NULL without freeing the previously allocated lease_ctx_info
structure.
This patch fixes the issue by adding kfree(lreq) before returning NULL
in both boundary check cases.
Fixes: bab703ed84 ("ksmbd: add bounds check for create lease context")
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 36991c1ccd upstream.
A use-after-free is possible if one thread destroys the file
via __ksmbd_close_fd while another thread holds a reference to
it. The existing checks on fp->refcount are not sufficient to
prevent this.
The fix takes ft->lock around the section which removes the
file from the file table. This prevents two threads acquiring the
same file pointer via __close_file_table_ids, as well as the other
functions which retrieve a file from the IDR and which already use
this same lock.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ca6df4f40 upstream.
ksmbd_vfs_stream_write() did not validate whether the write offset
(*pos) was within the bounds of the existing stream data length (v_len).
If *pos was greater than or equal to v_len, this could lead to an
out-of-bounds memory write.
This patch adds a check to ensure *pos is less than v_len before
proceeding. If the condition fails, -EINVAL is returned.
Cc: stable@vger.kernel.org
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53e3e5babc upstream.
Client can send empty newname string to ksmbd server.
It will cause a kernel oops from d_alloc.
This patch return the error when attempting to rename
a file or directory with an empty new name string.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74c72419ec upstream.
SMB create requests issued via smb311_posix_mkdir() have an incorrect
length of zero bytes for the POSIX create context data. ksmbd server
rejects such requests and logs "cli req too short" causing mkdir to fail
with "invalid argument" on the client side. It also causes subsequent
rmmod to crash in cifs_destroy_request_bufs()
Inspection of packets sent by cifs.ko using wireshark show valid data for
the SMB2_POSIX_CREATE_CONTEXT is appended with the correct offset, but
with an incorrect length of zero bytes. Fails with ksmbd+cifs.ko only as
Windows server/client does not use POSIX extensions.
Fix smb311_posix_mkdir() to set req->CreateContextsLength as part of
appending the POSIX creation context to the request.
Signed-off-by: Jethro Donaldson <devel@jro.nz>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2fc9feff45 upstream.
The sess->user object can currently be in use by another thread, for
example if another connection has sent a session setup request to
bind to the session being free'd. The handler for that connection could
be in the smb2_sess_setup function which makes use of sess->user.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e86e9134e1 upstream.
Setting sess->user = NULL was introduced to fix the dangling pointer
created by ksmbd_free_user. However, it is possible another thread could
be operating on the session and make use of sess->user after it has been
passed to ksmbd_free_user but before sess->user is set to NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1f46c99d9 upstream.
A UAF issue can occur due to a race condition between
ksmbd_session_rpc_open() and __session_rpc_close().
Add rpc_lock to the session to protect it.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1df0d4c616 ]
wait_event_timeout() will set the state of the current
task to TASK_UNINTERRUPTIBLE, before doing the condition check. This
means that ksmbd_durable_scavenger_alive() will try to acquire the mutex
while already in a sleeping state. The scheduler warns us by giving
the following warning:
do not call blocking ops when !TASK_RUNNING; state=2 set at
[<0000000061515a6f>] prepare_to_wait_event+0x9f/0x6c0
WARNING: CPU: 2 PID: 4147 at kernel/sched/core.c:10099 __might_sleep+0x12f/0x160
mutex lock is not needed in ksmbd_durable_scavenger_alive().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef86ab131d ]
When reparse point in SMB1 query_path_info() callback was detected then
query also for EA $LXDEV. In this EA are stored device major and minor
numbers used by WSL CHR and BLK reparse points. Without major and minor
numbers, stat() syscall does not work for char and block devices.
Similar code is already in SMB2+ query_path_info() callback function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16cb6b0509 ]
Like in UNICODE mode, SMB1 Session Setup Kerberos Request contains oslm and
domain strings.
Extract common code into ascii_oslm_strings() and ascii_domain_string()
functions (similar to unicode variants) and use these functions in
non-UNICODE code path in sess_auth_kerberos().
Decision if non-UNICODE or UNICODE mode is used is based on the
SMBFLG2_UNICODE flag in Flags2 packed field, and not based on the
capabilities of server. Fix this check too.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21a4e47578 ]
Move tcp_transport free to ksmbd_conn_free. If ksmbd connection is
referenced when ksmbd server thread terminates, It will not be freed,
but conn->tcp_transport is freed. __smb2_lease_break_noti can be performed
asynchronously when the connection is disconnected. __smb2_lease_break_noti
calls ksmbd_conn_write, which can cause use-after-free
when conn->ksmbd_transport is already freed.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2d99376c5 ]
ksmbd.mount will give each interfaces list and bind_interfaces_only flags
to ksmbd server. Previously, the interfaces list was sent only
when bind_interfaces_only was enabled.
ksmbd server browse only interfaces list given from ksmbd.conf on
FSCTL_QUERY_INTERFACE_INFO IOCTL.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 21a4e47578 ("ksmbd: fix use-after-free in __smb2_lease_break_noti()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0066f623bc ]
Prefer to report ENOMEM rather than incur the oom for allocations in
ksmbd. __GFP_NORETRY could not achieve that, It would fail the allocations
just too easily. __GFP_RETRY_MAYFAIL will keep retrying the allocation
until there is no more progress and fail the allocation instead go OOM
and let the caller to deal with it.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 21a4e47578 ("ksmbd: fix use-after-free in __smb2_lease_break_noti()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 262b73ef44 upstream.
The following Python script results in unexpected behaviour when run on
a CIFS filesystem against a Windows Server:
# Create file
fd = os.open('test', os.O_WRONLY|os.O_CREAT)
os.write(fd, b'foo')
os.close(fd)
# Open and close the file to leave a pending deferred close
fd = os.open('test', os.O_RDONLY|os.O_DIRECT)
os.close(fd)
# Try to open the file via a hard link
os.link('test', 'new')
newfd = os.open('new', os.O_RDONLY|os.O_DIRECT)
The final open returns EINVAL due to the server returning
STATUS_INVALID_PARAMETER. The root cause of this is that the client
caches lease keys per inode, but the spec requires them to be related to
the filename which causes problems when hard links are involved:
From MS-SMB2 section 3.3.5.9.11:
"The server MUST attempt to locate a Lease by performing a lookup in the
LeaseTable.LeaseList using the LeaseKey in the
SMB2_CREATE_REQUEST_LEASE_V2 as the lookup key. If a lease is found,
Lease.FileDeleteOnClose is FALSE, and Lease.Filename does not match the
file name for the incoming request, the request MUST be failed with
STATUS_INVALID_PARAMETER"
On client side, we first check the context of file open, if it hits above
conditions, we first close all opening files which are belong to the same
inode, then we do open the hard link file.
Cc: stable@vger.kernel.org
Signed-off-by: Chunjie Zhu <chunjie.zhu@cloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95d2b9f693 upstream.
This reverts commit e9f2517a3e.
Commit e9f2517a3e ("smb: client: fix TCP timers deadlock after
rmmod") is intended to fix a null-ptr-deref in LOCKDEP, which is
mentioned as CVE-2024-54680, but is actually did not fix anything;
The issue can be reproduced on top of it. [0]
Also, it reverted the change by commit ef7134c7fc ("smb: client:
Fix use-after-free of network namespace.") and introduced a real
issue by reviving the kernel TCP socket.
When a reconnect happens for a CIFS connection, the socket state
transitions to FIN_WAIT_1. Then, inet_csk_clear_xmit_timers_sync()
in tcp_close() stops all timers for the socket.
If an incoming FIN packet is lost, the socket will stay at FIN_WAIT_1
forever, and such sockets could be leaked up to net.ipv4.tcp_max_orphans.
Usually, FIN can be retransmitted by the peer, but if the peer aborts
the connection, the issue comes into reality.
I warned about this privately by pointing out the exact report [1],
but the bogus fix was finally merged.
So, we should not stop the timers to finally kill the connection on
our side in that case, meaning we must not use a kernel socket for
TCP whose sk->sk_net_refcnt is 0.
The kernel socket does not have a reference to its netns to make it
possible to tear down netns without cleaning up every resource in it.
For example, tunnel devices use a UDP socket internally, but we can
destroy netns without removing such devices and let it complete
during exit. Otherwise, netns would be leaked when the last application
died.
However, this is problematic for TCP sockets because TCP has timers to
close the connection gracefully even after the socket is close()d. The
lifetime of the socket and its netns is different from the lifetime of
the underlying connection.
If the socket user does not maintain the netns lifetime, the timer could
be fired after the socket is close()d and its netns is freed up, resulting
in use-after-free.
Actually, we have seen so many similar issues and converted such sockets
to have a reference to netns.
That's why I converted the CIFS client socket to have a reference to
netns (sk->sk_net_refcnt == 1), which is somehow mentioned as out-of-scope
of CIFS and technically wrong in e9f2517a3e, but **is in-scope and right
fix**.
Regarding the LOCKDEP issue, we can prevent the module unload by
bumping the module refcount when switching the LOCKDDEP key in
sock_lock_init_class_and_name(). [2]
For a while, let's revert the bogus fix.
Note that now we can use sk_net_refcnt_upgrade() for the socket
conversion, but I'll do so later separately to make backport easy.
Link: https://lore.kernel.org/all/20250402020807.28583-1-kuniyu@amazon.com/ #[0]
Link: https://lore.kernel.org/netdev/c08bd5378da647a2a4c16698125d180a@huawei.com/ #[1]
Link: https://lore.kernel.org/lkml/20250402005841.19846-1-kuniyu@amazon.com/ #[2]
Fixes: e9f2517a3e ("smb: client: fix TCP timers deadlock after rmmod")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
