commit e37546ad1f upstream.
Due to hardware limitations of NGBE, queue IRQs can only be requested
on vector 0 to 7. When the number of queues is set to the maximum 8,
the PCI IRQ vectors are allocated from 0 to 8. The vector 0 is used by
MISC interrupt, and althrough the vector 8 is used by queue interrupt,
it is unable to receive packets. This will cause some packets to be
dropped when RSS is enabled and they are assigned to queue 8.
So revert the adjustment of the MISC IRQ location, to make it be the
last one in IRQ vectors.
Fixes: 937d46ecc5 ("net: wangxun: add ethtool_ops for channel number")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20250701063030.59340-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e0fca6f2ce ]
MANA supports RDMA in PF mode. The driver should record the doorbell
physical address when in PF mode.
The doorbell physical address is used by the RDMA driver to map
doorbell pages of the device to user-mode applications through RDMA
verbs interface. In the past, they have been mapped to user-mode while
the device is in VF mode. With the support for PF mode implemented,
also expose those pages in PF mode.
Support for PF mode is implemented in
290e5d3c49 ("net: mana: Add support for Multi Vports on Bare metal")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1750210606-12167-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b74c2a2e9c ]
In bnxt_ets_validate(), the code incorrectly loops over all possible
traffic classes to check and add the ETS settings. Fix it to loop
over the configured traffic classes only.
The unconfigured traffic classes will default to TSA_ETS with 0
bandwidth. Looping over these unconfigured traffic classes may
cause the validation to fail and trigger this error message:
"rejecting ETS config starving a TC\n"
The .ieee_setets() will then fail.
Fixes: 7df4ae9fe8 ("bnxt_en: Implement DCBNL to support host-based DCBX.")
Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e81750b4e3 ]
The function ll_temac_ethtools_set_ringparam() incorrectly checked
rx_pending twice, once correctly for RX and once mistakenly in place
of tx_pending. This caused tx_pending to be left unchecked against
TX_BD_NUM_MAX.
As a result, invalid TX ring sizes may have been accepted or valid
ones wrongly rejected based on the RX limit, leading to potential
misconfiguration or unexpected results.
This patch corrects the condition to properly validate tx_pending.
Fixes: f7b261bfc3 ("net: ll_temac: Make RX/TX ring sizes configurable")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250710180621.2383000-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c9fce56fa ]
An optimization for promiscuous mode adds a high-priority steering
table with a single catch-all rule to steer all traffic directly to
the TTC table.
However, a gap exists between the creation of this table and the
insertion of the catch-all rule. Packets arriving in this brief window
would miss as no rule was inserted yet, unnecessarily incrementing the
'rx_steer_missed_packets' counter and dropped.
This patch resolves the issue by introducing a new prio for this
table, placing it between MLX5E_TC_PRIO and MLX5E_NIC_PRIO. By doing
so, packets arriving during the window now fall through to the next
prio (at MLX5E_NIC_PRIO) instead of being dropped.
Fixes: 1c46d7409f ("net/mlx5e: Optimize promiscuous mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb41a264a3 ]
There's a race between disabling DIM and NAPI callbacks using the dim
pointer on the RQ or SQ.
If NAPI checks the DIM state bit and sees it still set, it assumes
`rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after
that check, the pointer might already be set to NULL, leading to a NULL
pointer dereference in net_dim().
Fix this by calling `synchronize_net()` before freeing the DIM context.
This ensures all in-progress NAPI callbacks are finished before the
pointer is cleared.
Kernel log:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:net_dim+0x23/0x190
...
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? common_interrupt+0xf/0xa0
? sysvec_call_function_single+0xb/0x90
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? net_dim+0x23/0x190
? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core]
? sysvec_apic_timer_interrupt+0xb/0x90
mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core]
mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core]
? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core]
busy_poll_stop+0xa2/0x200
? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core]
? mlx5e_trigger_irq+0x130/0x130 [mlx5_core]
__napi_busy_loop+0x345/0x3b0
? sysvec_call_function_single+0xb/0x90
? asm_sysvec_call_function_single+0x16/0x20
? sysvec_apic_timer_interrupt+0xb/0x90
? pcpu_free_area+0x1e4/0x2e0
napi_busy_loop+0x11/0x20
xsk_recvmsg+0x10c/0x130
sock_recvmsg+0x44/0x70
__sys_recvfrom+0xbc/0x130
? __schedule+0x398/0x890
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
---[ end trace 0000000000000000 ]---
...
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fixes: 445a25f6e1 ("net/mlx5e: Support updating coalescing configuration without resetting channels")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd4360c0e8 ]
Restrict the 100Mbit forced-mode workaround to link-down transitions
only, to prevent repeated link reset cycles in certain configurations.
The workaround was originally introduced to improve signal reliability
when switching cables between long and short distances. It temporarily
forces the PHY into 10 Mbps before returning to 100 Mbps.
However, when used with autonegotiating link partners (e.g., Intel i350),
executing this workaround on every link change can confuse the partner
and cause constant renegotiation loops. This results in repeated link
down/up transitions and the PHY never reaching a stable state.
Limit the workaround to only run during the PHY_NOLINK state. This ensures
it is triggered only once per link drop, avoiding disruptive toggling
while still preserving its intended effect.
Note: I am not able to reproduce the original issue that this workaround
addresses. I can only confirm that 100 Mbit mode works correctly in my
test setup. Based on code inspection, I assume the workaround aims to
reset some internal state machine or signal block by toggling speeds.
However, a PHY reset is already performed earlier in the function via
phy_init_hw(), which may achieve a similar effect. Without a reproducer,
I conservatively keep the workaround but restrict its conditions.
Fixes: e57cf3639c ("net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250709130753.3994461-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4517c363e ]
Enable .soft_reset for the LAN88xx PHY driver by assigning
genphy_soft_reset() to ensure that the phylib core performs a proper
soft reset during reconfiguration.
Previously, the driver left .soft_reset unimplemented, so calls to
phy_init_hw() (e.g., from lan88xx_link_change_notify()) did not fully
reset the PHY. As a result, stale contents in the Link Partner Ability
(LPA) register could persist, causing the PHY to incorrectly report
that the link partner advertised autonegotiation even when it did not.
Using genphy_soft_reset() guarantees a clean reset of the PHY and
corrects the false autoneg reporting in these scenarios.
Fixes: ccb989e4d1 ("net: phy: microchip: Reset LAN88xx PHY to ensure clean link state on LAN7800/7850")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250709130753.3994461-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01b8114b43 ]
The previous hardcoded definitions of NUM_RX_STATS and
NUM_TX_STATS were not updated when new fields were added
to the ibmvnic_{rx,tx}_queue_stats structures. Specifically,
commit 2ee73c54a6 ("ibmvnic: Add stat for tx direct vs tx
batched") added a fourth TX stat, but NUM_TX_STATS remained 3,
leading to a mismatch.
This patch replaces the static defines with dynamic sizeof-based
calculations to ensure the stat arrays are correctly sized.
This fixes incorrect indexing and prevents incomplete stat
reporting in tools like ethtool.
Fixes: 2ee73c54a6 ("ibmvnic: Add stat for tx direct vs tx batched")
Signed-off-by: Mingming Cao <mmc@linux.ibm.com>
Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com>
Reviewed-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250709153332.73892-1-mmc@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03ee8f7380 ]
devm_kasprintf() returns NULL on error. Currently, mt7925_thermal_init()
does not check for this case, which results in a NULL pointer
dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 396e41a74a ("wifi: mt76: mt7925: support temperature sensor")
Signed-off-by: Henry Martin <bsdhenryma@tencent.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250625124901.1839832-1-bsdhenryma@tencent.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ce6ad9262 ]
The function is used as remove callback for a platform driver.
It was missed during the conversion from int to void
Fixes: 0edb555a65 ("platform: Make platform_driver::remove() return void")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20250706092053.97724-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74b1ec9f5d ]
There is a potential NULL pointer dereference in zd_mac_tx_to_dev(). For
example, the following is possible:
T0 T1
zd_mac_tx_to_dev()
/* len == skb_queue_len(q) */
while (len > ZD_MAC_MAX_ACK_WAITERS) {
filter_ack()
spin_lock_irqsave(&q->lock, flags);
/* position == skb_queue_len(q) */
for (i=1; i<position; i++)
skb = __skb_dequeue(q)
if (mac->type == NL80211_IFTYPE_AP)
skb = __skb_dequeue(q);
spin_unlock_irqrestore(&q->lock, flags);
skb_dequeue() -> NULL
Since there is a small gap between checking skb queue length and skb being
unconditionally dequeued in zd_mac_tx_to_dev(), skb_dequeue() can return NULL.
Then the pointer is passed to zd_mac_tx_status() where it is dereferenced.
In order to avoid potential NULL pointer dereference due to situations like
above, check if skb is not NULL before passing it to zd_mac_tx_status().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 459c51ad6e ("zd1211rw: port to mac80211")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://patch.msgid.link/20250626114619.172631-1-d.dulov@aladdin.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c701574c54 upstream.
Update the destination index to use 'n_ssids', which is incremented only
when a valid SSID is present. Previously, both mt76_connac_mcu_hw_scan()
and mt7925_mcu_hw_scan() used the loop index 'i' for the destination
array, potentially leaving gaps if any source SSIDs had zero length.
Cc: stable@vger.kernel.org
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250612062046.160598-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d20de55332 upstream.
MT_INT_TX_DONE_MCU_WM may cause tx interrupt to be mishandled
during a reset failure, leading to the reset process failing.
By using MT_INT_TX_DONE_MCU instead of MT_INT_TX_DONE_MCU_WM,
the handling of tx interrupt is improved.
Cc: stable@vger.kernel.org
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250612060931.135635-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7035a08234 upstream.
The decap offload configuration should only be applied after the STA has
been successfully initialized. Attempting to configure it earlier can lead
to corruption of the MAC configuration in the chip's hardware state.
Add an early check for `msta->deflink.wcid.sta` to ensure the station peer
is properly initialized before proceeding with decapsulation offload
configuration.
Cc: stable@vger.kernel.org
Fixes: 24299fc869 ("mt76: mt7921: enable rx header traslation offload")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Link: https://patch.msgid.link/f23a72ba7a3c1ad38ba9e13bb54ef21d6ef44ffb.1748149855.git.deren.wu@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 02c4d6c26f ]
While transitioning from netdev_alloc_ip_align() to build_skb(), memory
for the "skb_shared_info" member of an "skb" was not allocated. Fix this
by allocating "PAGE_SIZE" as the skb length, accounting for the packet
length, headroom and tailroom, thereby including the required memory space
for skb_shared_info.
Fixes: 8acacc40f7 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Link: https://patch.msgid.link/20250707085201.1898818-1-c-vankar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dfe110cc0 ]
Force a fixed MDI-X mode when auto-negotiation is disabled to prevent
link instability.
When forcing the link speed and duplex on a LAN9500 PHY (e.g., with
`ethtool -s eth0 autoneg off ...`) while leaving MDI-X control in auto
mode, the PHY fails to establish a stable link. This occurs because the
PHY's Auto-MDIX algorithm is not designed to operate when
auto-negotiation is disabled. In this state, the PHY continuously
toggles the TX/RX signal pairs, which prevents the link partner from
synchronizing.
This patch resolves the issue by detecting when auto-negotiation is
disabled. If the MDI-X control mode is set to 'auto', the driver now
forces a specific, stable mode (ETH_TP_MDI) to prevent the pair
toggling. This choice of a fixed MDI mode mirrors the behavior the
hardware would exhibit if the AUTOMDIX_EN strap were configured for a
fixed MDI connection.
Fixes: 05b35e7eb9 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250703114941.3243890-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0713e55533 ]
Override the hardware strap configuration for MDI-X mode to ensure a
predictable initial state for the driver. The initial mode of the LAN87xx
PHY is determined by the AUTOMDIX_EN strap pin, but the driver has no
documented way to read its latched status.
This unpredictability means the driver cannot know if the PHY has
initialized with Auto-MDIX enabled or disabled, preventing it from
providing a reliable interface to the user.
This patch introduces a `config_init` hook that forces the PHY into a
known state by explicitly enabling Auto-MDIX.
Fixes: 05b35e7eb9 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250703114941.3243890-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a141af8eb2 ]
Correct the Auto-MDIX configuration to ensure userspace settings are
respected when the feature is disabled by the AUTOMDIX_EN hardware strap.
The LAN9500 PHY allows its default MDI-X mode to be configured via a
hardware strap. If this strap sets the default to "MDI-X off", the
driver was previously unable to enable Auto-MDIX from userspace.
When handling the ETH_TP_MDI_AUTO case, the driver would set the
SPECIAL_CTRL_STS_AMDIX_ENABLE_ bit but neglected to set the required
SPECIAL_CTRL_STS_OVRRD_AMDIX_ bit. Without the override flag, the PHY
falls back to its hardware strap default, ignoring the software request.
This patch corrects the behavior by also setting the override bit when
enabling Auto-MDIX. This ensures that the userspace configuration takes
precedence over the hardware strap, allowing Auto-MDIX to be enabled
correctly in all scenarios.
Fixes: 05b35e7eb9 ("smsc95xx: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andre Edich <andre.edich@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250703114941.3243890-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78b7920a03 ]
According to the Synopsys Controller IP XGMAC-10G Ethernet MAC Databook
v3.30a (section 2.7.2), when the INTM bit in the DMA_Mode register is set
to 2, the sbd_perch_tx_intr_o[] and sbd_perch_rx_intr_o[] signals operate
in level-triggered mode. However, in this configuration, the DMA does not
assert the XGMAC_NIS status bit for Rx or Tx interrupt events.
This creates a functional regression where the condition
if (likely(intr_status & XGMAC_NIS)) in dwxgmac2_dma_interrupt() will
never evaluate to true, preventing proper interrupt handling for
level-triggered mode. The hardware specification explicitly states that
"The DMA does not assert the NIS status bit for the Rx or Tx interrupt
events" (Synopsys DWC_XGMAC2 Databook v3.30a, sec. 2.7.2).
The fix ensures correct handling of both edge and level-triggered
interrupts while maintaining backward compatibility with existing
configurations. It has been tested on the hardware device (not publicly
available), and it can properly trigger the RX and TX interrupt handling
in both the INTM=0 and INTM=2 configurations.
Fixes: d6ddfacd95 ("net: stmmac: Add DMA related callbacks for XGMAC2")
Tested-by: EricChan <chenchuangyu@xiaomi.com>
Signed-off-by: EricChan <chenchuangyu@xiaomi.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703020449.105730-1-chenchuangyu@xiaomi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ab9ada765 ]
The previous commit unintentionally removed the code responsible for
enabling WoL via MMD3 register 0x8012 BIT5. As a result, Wake-on-LAN
(WoL) support for the QCA808X PHY is no longer functional.
The WoL (Wake-on-LAN) feature for the QCA808X PHY is enabled via MMD3
register 0x8012, BIT5. This implementation is aligned with the approach
used in at8031_set_wol().
Fixes: e58f30246c ("net: phy: at803x: fix the wol setting functions")
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250704-qcom_phy_wol_support-v1-2-053342b1538d@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e31cf3cce2 ]
Move the WoL (Wake-on-LAN) functionality to a shared library to enable
its reuse by the QCA808X PHY driver, incorporating support for WoL
functionality similar to the implementation in at8031_set_wol().
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://patch.msgid.link/20250704-qcom_phy_wol_support-v1-1-053342b1538d@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4ab9ada765 ("net: phy: qcom: qca808x: Fix WoL issue by utilizing at8031_set_wol()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9fd9888a5 ]
I received a kernel-test-bot report[1] that shows the
[-Wunused-but-set-variable] warning. Since the previous commit I made, as
the 'Fixes' tag shows, gives users an option to turn on and off the
CONFIG_RFS_ACCEL, the issue then can be discovered and reproduced with
GCC specifically.
Like Simon and Jakub suggested, use fewer #ifdefs which leads to fewer
bugs.
[1]
All warnings (new ones prefixed by >>):
drivers/net/ethernet/broadcom/bnxt/bnxt.c: In function 'bnxt_request_irq':
>> drivers/net/ethernet/broadcom/bnxt/bnxt.c:10703:9: warning: variable 'j' set but not used [-Wunused-but-set-variable]
10703 | int i, j, rc = 0;
| ^
Fixes: 9b6a30febd ("net: allow rps/rfs related configs to be switched")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506282102.x1tXt0qz-lkp@intel.com/
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5d6b15d95 ]
Currently for CCMP256, GCMP128 and GCMP256 ciphers, in
ath12k_install_key() IEEE80211_KEY_FLAG_GENERATE_IV_MGMT is not set and
in ath12k_mac_mgmt_tx_wmi() a length of IEEE80211_CCMP_MIC_LEN is reserved
for all ciphers.
This results in unexpected drop of protected management frames in case
either of above 3 ciphers is used. The reason is, without
IEEE80211_KEY_FLAG_GENERATE_IV_MGMT set, mac80211 will not generate
CCMP/GCMP headers in TX frame for ath12k.
Also MIC length reserved is wrong and such frames are dropped by hardware.
Fix this by setting IEEE80211_KEY_FLAG_GENERATE_IV_MGMT flag for above
ciphers and by reserving proper MIC length for those ciphers.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250415195812.2633923-2-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37a068fc9d ]
Currently, in the case of extended skb allocation, the buffer is freed
before the DMA unmap operation. This premature deletion can result in
skb->data corruption, as the memory region could be re-allocated for other
purposes. Fix this issue by reordering the failure cases by calling
dma_unmap_single() first, then followed by the corresponding kfree_skb().
This helps avoid data corruption in case of failures in dp_tx().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250411060154.1388159-2-praneesh.p@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28a9972e0f ]
When vlan support was added, we missed that when
ath12k_dp_prepare_htt_metadata() returns an error we also need to free
the skb holding the metadata before going on with the cleanup process.
Compile tested only.
Fixes: 26dd8ccdba ("wifi: ath12k: dynamic VLAN support")
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250122160112.3234558-1-nico.escande@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Stable-dep-of: 37a068fc9d ("wifi: ath12k: Handle error cases during extended skb allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd4e41ebf6 ]
When the active link is changed for a bond device, the existing xfrm
states need to be migrated over to the new link. This is done with:
- bond_ipsec_del_sa_all() goes through the offloaded states list and
removes all of them from hw.
- bond_ipsec_add_sa_all() re-offloads all states to the new device.
But because the offload status of xfrm states isn't marked in any way,
there can be bugs.
When all bond links are down, bond_ipsec_del_sa_all() unoffloads
everything from the previous active link. If the same link then comes
back up, nothing gets reoffloaded by bond_ipsec_add_sa_all().
This results in a stack trace like this a bit later when user space
removes the offloaded rules, because mlx5e_xfrm_del_state() is asked to
remove a rule that's no longer offloaded:
[] Call Trace:
[] <TASK>
[] ? __warn+0x7d/0x110
[] ? mlx5e_xfrm_del_state+0x90/0xa0 [mlx5_core]
[] ? report_bug+0x16d/0x180
[] ? handle_bug+0x4f/0x90
[] ? exc_invalid_op+0x14/0x70
[] ? asm_exc_invalid_op+0x16/0x20
[] ? mlx5e_xfrm_del_state+0x73/0xa0 [mlx5_core]
[] ? mlx5e_xfrm_del_state+0x90/0xa0 [mlx5_core]
[] bond_ipsec_del_sa+0x1ab/0x200 [bonding]
[] xfrm_dev_state_delete+0x1f/0x60
[] __xfrm_state_delete+0x196/0x200
[] xfrm_state_delete+0x21/0x40
[] xfrm_del_sa+0x69/0x110
[] xfrm_user_rcv_msg+0x11d/0x300
[] ? release_pages+0xca/0x140
[] ? copy_to_user_tmpl.part.0+0x110/0x110
[] netlink_rcv_skb+0x54/0x100
[] xfrm_netlink_rcv+0x31/0x40
[] netlink_unicast+0x1fc/0x2d0
[] netlink_sendmsg+0x1e4/0x410
[] __sock_sendmsg+0x38/0x60
[] sock_write_iter+0x94/0xf0
[] vfs_write+0x338/0x3f0
[] ksys_write+0xba/0xd0
[] do_syscall_64+0x4c/0x100
[] entry_SYSCALL_64_after_hwframe+0x4b/0x53
There's also another theoretical bug:
Calling bond_ipsec_del_sa_all() multiple times can result in corruption
in the driver implementation if the double-free isn't tolerated. This
isn't nice.
Before the "Fixes" commit, xs->xso.real_dev was set to NULL when an xfrm
state was unoffloaded from a device, but a race with netdevsim's
.xdo_dev_offload_ok() accessing real_dev was considered a sufficient
reason to not set real_dev to NULL anymore. This unfortunately
introduced the new bugs.
Since .xdo_dev_offload_ok() was significantly refactored by [1] and
there are no more users in the stack of xso.real_dev, that
race is now gone and xs->xso.real_dev can now once again be used to
represent which device (if any) currently holds the offloaded rule.
Go one step further and set real_dev after add/before delete calls, to
catch any future driver misuses of real_dev.
[1] https://lore.kernel.org/netdev/cover.1739972570.git.leon@kernel.org/
Fixes: f8cde98059 ("bonding: fix xfrm real_dev null pointer dereference")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16ceda2ef6 ]
The link status is latched low so that momentary link drops
can be detected. Always double-reading the status defeats this
design feature. Only double read if link was already down
This prevents unnecessary duplicate readings of the link status.
Fixes: 4f3b20bfbb ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701065016.4140707-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 561aa0e22b ]
dma_map_XXX() functions return values DMA_MAPPING_ERROR as error values
which is often ~0. The error value should be tested with
dma_mapping_error().
This patch creates a new function in niu_ops to test if the mapping
failed. The test is fixed in niu_rbr_add_page(), added in
niu_start_xmit() and the successfully mapped pages are unmaped upon error.
Fixes: ec2deec1f3 ("niu: Fix to check for dma mapping errors.")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaf2b24803 ]
The comparison in enic_change_mtu() incorrectly used the current
netdev->mtu instead of the new new_mtu value when warning about
an MTU exceeding the port MTU. This could suppress valid warnings
or issue incorrect ones.
Fix the condition and log to properly reflect the new_mtu.
Fixes: ab123fe071 ("enic: handle mtu change for vf properly")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: John Daley <johndale@cisco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250628145612.476096-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42fd432fe6 ]
Update the Clause 37 Auto-Negotiation implementation to properly align
with the PCS hardware specifications:
- Fix incorrect bit settings in Link Status and Link Duplex fields
- Implement missing sequence steps 2 and 7
These changes ensure CL37 auto-negotiation protocol follows the exact
sequence patterns as specified in the hardware databook.
Fixes: 1bf40ada62 ("amd-xgbe: Add support for clause 37 auto-negotiation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250630192636.3838291-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0325143b59 ]
I226 devices advertise support for the PCI-E link L1.2 substate. However,
due to a hardware limitation, the exit latency from this low-power state
is longer than the packet buffer can tolerate under high traffic
conditions. This can lead to packet loss and degraded performance.
To mitigate this, disable the L1.2 substate. The increased power draw
between L1.1 and L1.2 is insignificant.
Fixes: 4354621173 ("igc: Add new device ID's")
Link: https://lore.kernel.org/intel-wired-lan/15248b4f-3271-42dd-8e35-02bfc92b25e1@intel.com
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2def09ead4 ]
The driver registered xdp_rxq_info structures via xdp_rxq_info_reg()
but failed to properly unregister them in error paths and during
removal.
Fixes: d678be1dc1 ("dpaa2-eth: add XDP_REDIRECT support")
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20250626133003.80136-1-wangfushuai@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d72411d209 ]
The `dma_map_XXX()` functions can fail and must be checked using
`dma_mapping_error()`. This patch adds proper error handling for all
DMA mapping calls.
In `atl1_alloc_rx_buffers()`, if DMA mapping fails, the buffer is
deallocated and marked accordingly.
In `atl1_tx_map()`, previously mapped buffers are unmapped and the
packet is dropped on failure.
If `atl1_xmit_frame()` drops the packet, increment the tx_error counter.
Fixes: f3cc28c797 ("Add Attansic L1 ethernet driver.")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20250625141629.114984-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5186ff7e1d upstream.
When setting "ethtool -L eth0 combined 1", the number of RX/TX queue is
changed to be 1. RSS is disabled at this moment, and the indices of FDIR
have not be changed in wx_set_rss_queues(). So the combined count still
shows the previous value. This issue was introduced when supporting
FDIR. Fix it for those devices that support FDIR.
Fixes: 34744a7749 ("net: txgbe: add FDIR info to ethtool ops")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/A5C8FE56D6C04608+20250701070625.73680-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc9f7f65cd upstream.
Move the creating of irq_domain for MISC IRQ from .probe to .ndo_open,
and free it in .ndo_stop, to maintain consistency with the queue IRQs.
This it for subsequent adjustments to the IRQ vectors.
Fixes: aefd013624 ("net: txgbe: use irq_domain for interrupt controller")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250701063030.59340-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 315dbdd7cd upstream.
In xdp_linearize_page, when reading the following buffers from the ring,
we forget to check the received length with the true allocate size. This
can lead to an out-of-bound read. This commit adds that missing check.
Cc: <stable@vger.kernel.org>
Fixes: 4941d472bf ("virtio-net: do not reset during XDP set")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250630144212.48471-2-minhquangbui99@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5177373c31 upstream.
When calling buf_to_xdp, the len argument is the frame data's length
without virtio header's length (vi->hdr_len). We check that len with
xsk_pool_get_rx_frame_size() + vi->hdr_len
to ensure the provided len does not larger than the allocated chunk
size. The additional vi->hdr_len is because in virtnet_add_recvbuf_xsk,
we use part of XDP_PACKET_HEADROOM for virtio header and ask the vhost
to start placing data from
hard_start + XDP_PACKET_HEADROOM - vi->hdr_len
not
hard_start + XDP_PACKET_HEADROOM
But the first buffer has virtio_header, so the maximum frame's length in
the first buffer can only be
xsk_pool_get_rx_frame_size()
not
xsk_pool_get_rx_frame_size() + vi->hdr_len
like in the current check.
This commit adds an additional argument to buf_to_xdp differentiate
between the first buffer and other ones to correctly calculate the maximum
frame's length.
Cc: stable@vger.kernel.org
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Fixes: a4e7ba7027 ("virtio_net: xsk: rx: support recv small mode")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250630151315.86722-2-minhquangbui99@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c60d101a22 ]
The cpumask should not be a local variable, since its pointer is saved
to irq_desc and may be accessed from procfs.
To fix it, use the persistent mask cpumask_of(cpu#).
Cc: stable@vger.kernel.org
Fixes: 8deec94c60 ("net: stmmac: set IRQ affinity hint for multi MSI vectors")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250318032424.112067-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8989bad541 upstream.
The first boards show up with Realtek's RTL8125D. This MAC/PHY chip
comes with an integrated 2.5Gbps PHY with ID 0x001cc841. It's not
clear yet whether there's an external version of this PHY and how
Realtek calls it, therefore use the numeric id for now.
Link: https://lore.kernel.org/netdev/2ada65e1-5dfa-456c-9334-2bc51272e9da@gmail.com/T/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Message-ID: <7d2924de-053b-44d2-a479-870dc3878170@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mathieu Tortuyaux <mtortuyaux@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
