[ Upstream commit 7e54d93287 ]
The SYNC_IN pulse width must be at least 1.5 x Tmclk, corresponding to
~2.5 µs at the lowest supported MCLK frequency. Add a 3 µs delay to
ensure reliable synchronization timing even for the worst-case scenario.
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/d3ee92a533cd1207cf5c5cc4d7bdbb5c6c267f68.1749063024.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a2f15c5a8 ]
Fix overallocating the size of the scan buffer by converting bits to
bytes. The size is meant to be in bytes, so scanbits needs to be
divided by 8.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250701-iio-adc-ad7173-add-spi-offload-support-v3-1-42abb83e3dac@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79dabbd505 ]
The OFFSET calculation in the prox_read_raw() was incorrectly using the
unit exponent, which is intended for SCALE calculations.
Remove the incorrect OFFSET calculation and set it to a fixed value of 0.
Cc: stable@vger.kernel.org
Fixes: 39a3a0138f ("iio: hid-sensors: Added Proximity Sensor Driver")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250331055022.1149736-4-lixu.zhang@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ adapted prox_attr array access to single structure member access ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83ded7cfac ]
The variables `scale_pre_decml`, `scale_post_decml`, and `scale_precision`
were assigned in commit d68c592e02 ("iio: hid-sensor-prox: Fix scale not
correct issue"), but due to a merge conflict in
commit 9c15db92a8 ("Merge tag 'iio-for-5.13a' of
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next"),
these assignments were lost.
Add back lost assignments and replace `st->prox_attr` with
`st->prox_attr[0]` because commit 596ef5cf65 ("iio: hid-sensor-prox: Add
support for more channels") changed `prox_attr` to an array.
Cc: stable@vger.kernel.org # 5.13+
Fixes: 9c15db92a8 ("Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250331055022.1149736-2-lixu.zhang@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ changed st->prox_attr[0] array access to st->prox_attr single struct member ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f92e93e25 upstream.
Throughout the various probe functions &indio_dev->dev is used before it
is initialized. This caused a kernel panic in st_sensors_power_enable()
when the call to devm_regulator_bulk_get_enable() fails and then calls
dev_err_probe() with the uninitialized device.
This seems to only cause a panic with dev_err_probe(), dev_err(),
dev_warn() and dev_info() don't seem to cause a panic, but are fixed
as well.
The issue is reported and traced here: [1]
Link: https://lore.kernel.org/all/AM7P189MB100986A83D2F28AF3FFAF976E39EA@AM7P189MB1009.EURP189.PROD.OUTLOOK.COM/ [1]
Cc: stable@vger.kernel.org
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://... [1]
Link: https://patch.msgid.link/20250527-st_iio_fix-v4-1-12d89801c761@gocontroll.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da9374819e upstream.
The buffer is set to 80 character. If a caller write more characters,
count is truncated to the max available space in "simple_write_to_buffer".
But afterwards a string terminator is written to the buffer at offset count
without boundary check. The zero termination is written OUT-OF-BOUND.
Add a check that the given buffer is smaller then the buffer to prevent.
Fixes: 035b498921 ("iio: backend: make sure to NULL terminate stack buffer")
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250508130612.82270-2-markus.burri@mt.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8ad595064 upstream.
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().
Fixes: 1add698802 ("iio: adc: Add support for STM32 ADC core")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://patch.msgid.link/20250515083101.3811350-1-nichen@iscas.ac.cn
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d8d7c1dbc upstream.
The IIO core issues warnings when a scan mask is a subset of a previous
entry in the available_scan_masks array.
On a board using a MAX11601, the following warning is observed:
max1363 1-0064: available_scan_mask 7 subset of 6. Never used
This occurs because the entries in the max11607_mode_list[] array are not
ordered correctly. To fix this, reorder the entries so that no scan mask is
a subset of an earlier one.
While at it, reorder the mode_list[] arrays for other supported chips as
well, to prevent similar warnings on different variants.
Note fixes tag dropped as these were introduced over many commits a long
time back and the side effect until recently was a reduction in sampling
rate due to reading too many channels when only a few were desired.
Now we have a sanity check that reports this error but that is not
where the issue was introduced.
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250516173900.677821-2-festevam@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d21f2c2dd upstream.
Since commit 2718f15403 ("iio: sanity check available_scan_masks array"),
booting a board populated with a MAX11601 results in a flood of warnings:
max1363 1-0064: available_scan_mask 8 subset of 0. Never used
max1363 1-0064: available_scan_mask 9 subset of 0. Never used
max1363 1-0064: available_scan_mask 10 subset of 0. Never used
max1363 1-0064: available_scan_mask 11 subset of 0. Never used
max1363 1-0064: available_scan_mask 12 subset of 0. Never used
max1363 1-0064: available_scan_mask 13 subset of 0. Never used
...
These warnings are caused by incorrect offsets used for differential
channels in the MAX1363_4X_CHANS() and MAX1363_8X_CHANS() macros.
The max1363_mode_table[] defines the differential channel mappings as
follows:
MAX1363_MODE_DIFF_SINGLE(0, 1, 1 << 12),
MAX1363_MODE_DIFF_SINGLE(2, 3, 1 << 13),
MAX1363_MODE_DIFF_SINGLE(4, 5, 1 << 14),
MAX1363_MODE_DIFF_SINGLE(6, 7, 1 << 15),
MAX1363_MODE_DIFF_SINGLE(8, 9, 1 << 16),
MAX1363_MODE_DIFF_SINGLE(10, 11, 1 << 17),
MAX1363_MODE_DIFF_SINGLE(1, 0, 1 << 18),
MAX1363_MODE_DIFF_SINGLE(3, 2, 1 << 19),
MAX1363_MODE_DIFF_SINGLE(5, 4, 1 << 20),
MAX1363_MODE_DIFF_SINGLE(7, 6, 1 << 21),
MAX1363_MODE_DIFF_SINGLE(9, 8, 1 << 22),
MAX1363_MODE_DIFF_SINGLE(11, 10, 1 << 23),
Update the macros to follow this same pattern, ensuring that the scan masks
are valid and preventing the warnings.
Cc: stable@vger.kernel.org
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250516173900.677821-1-festevam@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3281ddcea6 upstream.
The AXP717 ADC channel maps is missing a sentinel entry at the end. This
causes a KASAN warning.
Add the missing sentinel entry.
Fixes: 5ba0cb9258 ("iio: adc: axp20x_adc: add support for AXP717 ADC")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20250607135627.2086850-1-wens@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1fe16dc1a2 upstream.
fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with
iio_for_each_active_channel()) without making sure the indio_dev
stays in buffer mode.
There is a race if indio_dev exits buffer mode in the middle of the
interrupt that flushes the fifo. Fix this by calling
synchronize_irq() to ensure that no interrupt is currently running when
disabling buffer mode.
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
[...]
_find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290
fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178
fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c
irq_thread_fn from irq_thread+0x110/0x1f4
irq_thread from kthread+0xe0/0xfc
kthread from ret_from_fork+0x14/0x2c
Fixes: 79e3a5bdd9 ("iio: accel: fxls8962af: add hw buffered sampling")
Cc: stable@vger.kernel.org
Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250603-fxlsrace-v2-1-5381b36ba1db@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1e758b6132 ]
Fix ad3541/2r voltage ranges to be as per ad3542r datasheet,
rev. C, table 38 (page 57).
The wrong ad354xr ranges was generating erroneous Vpp output.
In more details:
- fix wrong number of ranges, they are 5 ranges, not 6,
- remove non-existent 0-3V range,
- adjust order, since ad3552r_find_range() get a wrong index,
producing a wrong Vpp as output.
Retested all the ranges on real hardware, EVALAD3542RFMCZ:
adi,output-range-microvolt (fdt):
<(000000) (2500000)>; ok (Rfbx1, switch 10)
<(000000) (5000000)>; ok (Rfbx1, switch 10)
<(000000) (10000000)>; ok (Rfbx1, switch 10)
<(-5000000) (5000000)>; ok (Rfbx2, switch +/- 5)
<(-2500000) (7500000)>; ok (Rfbx2, switch -2.5/7.5)
Fixes: 8f2b54824b ("drivers:iio:dac: Add AD3552R driver support")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250108-wip-bl-ad3552r-axi-v0-iio-testing-carlos-v2-1-2dac02f04638@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f665d7d33d ]
Extracting common code, to share common code to be used later
by the AXI driver version (ad3552r-axi.c).
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241028-wip-bl-ad3552r-axi-v0-iio-testing-v9-6-f6960b4f9719@kernel-space.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5ac6cb1c8 ]
Changes to use FIELD_PREP, so that driver-specific ad3552r_field_prep
is removed. Variables (arrays) that was used to call ad3552r_field_prep
are removed too.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241028-wip-bl-ad3552r-axi-v0-iio-testing-v9-5-f6960b4f9719@kernel-space.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5cdb098a3 ]
Fix Smatch-detected issue:
drivers/iio/adc/ad_sigma_delta.c:604 ad_sd_trigger_handler() error:
uninitialized symbol 'status_pos'.
The variable `status_pos` was only initialized in specific switch cases
(1, 2, 3, 4), which could leave it uninitialized if `reg_size` had an
unexpected value.
Fix by adding a default case to the switch block to catch unexpected
values of `reg_size`. Use `dev_err_ratelimited()` for error logging and
`goto irq_handled` instead of returning early.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Link: https://patch.msgid.link/20250410170408.8585-1-purvayeshi550@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 886a446b76 ]
On x86_32 s64 fields are only 32-bit aligned. Hence force the alignment of
the field and padding in the structure by using aligned_s64 instead.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-19-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 16038474e3 upstream.
According to spec temperature should be returned in milli degrees Celsius.
Add in_temp_scale to calculate from Celsius to milli Celsius.
Fixes: a3e0b51884 ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers")
Cc: stable@vger.kernel.org
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250505-fxls-v4-1-a38652e21738@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89944d88f8 upstream.
Fix incorrect value mask for register write. Register values are 8-bit,
not 9. If this function was called with a value > 0xFF and an even addr,
it would cause writing to the next register.
Fixes: f2a22e1e17 ("iio: adc: ad7606: Add support for software mode for ad7616")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250428-iio-adc-ad7606_spi-fix-write-value-mask-v1-1-a2d5e85a809f@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cdfbc0113 upstream.
Apply a mask to the raw value received over the SPI bus for unsigned
direct reads. As we found recently, SPI controllers may not set unused
bits to 0 when reading with bits_per_word != {8,16,32}. The ad7944 uses
bits_per_word of 14 and 18, so we need to mask the value to be sure we
returning the correct value to userspace during a direct read.
Fixes: d1efcf8871 ("iio: adc: ad7944: add driver for AD7944/AD7985/AD7986")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-adc-ad7944-max-high-bits-on-direct-read-v1-1-b173facceefe@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2f8200142 upstream.
>From the documentation:
"offset to be added to <type>[Y]_raw prior toscaling by <type>[Y]_scale"
Offset should be applied before multiplying scale, so divide offset by
scale to make this correct.
Fixes: bc3eb0207f ("iio: imu: inv_icm42600: add temperature sensor support")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250502-imu-v1-1-129b8391a4e3@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c78317b42 upstream.
Mark the temperature element signed, data read from the TEMP_OUT register
is in two's complement format.
This will avoid the temperature being mishandled and miss displayed.
Fixes: a3e0b51884 ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers")
Suggested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250505-fxls-v4-2-a38652e21738@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f62c49d8f3 ]
The conversion result registers differs between devices. Make sure the
mapping is correct by using a device dependent .get_raw() callback function.
Fixes: 732ad34260 ("iio: adc: mcp3911: add support for the whole MCP39xx family")
Co-developed-by: Lukas Rauber <lukas.rauber@janitza.de>
Signed-off-by: Lukas Rauber <lukas.rauber@janitza.de>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250428-mcp3911-fixes-v2-1-406e39330c3d@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8712e4986e ]
The sinc4 filter has a factor 0.23 between Output Data Rate and f_{3dB}
and for sinc3 the factor is 0.272 according to the data sheets for
ad7124-4 (Rev. E.) and ad7124-8 (Rev. F).
Fixes: cef2760954 ("iio: adc: ad7124: add 3db filter")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/20250317115247.3735016-6-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9016776f13 ]
This patch allows writing u64 values to the ADMV8818's high and low-pass
filter frequencies. It includes the following changes:
- Rejects negative frequencies in admv8818_write_raw.
- Adds a write_raw_get_fmt function to admv8818's iio_info, returning
IIO_VAL_INT_64 for the high and low-pass filter 3dB frequency channels.
Fixes: f34fe888ad ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Brian Pellegrino <bpellegrino@arka.org>
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-7-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb6009a28d ]
HZ_PER_MHZ is only unsigned long. This math overflows, leading to
incorrect results.
Fixes: f34fe888ad ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-4-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef0ce24f59 ]
Corrects the upper range of LPF Band 4 from 18.5 GHz to 18.85 GHz per
the ADMV8818 datasheet
Fixes: f34fe888ad ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-3-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 503d20ed8c ]
Replace use of storagebits with realbits for determining the number of
bytes needed for SPI transfers.
When adding SPI offload support, storagebits will always be 32 rather
than 16 for 16-bit 16-bit chips so we can no longer rely on storagebits
being the correct size expected by the SPI framework (it always uses
4 bytes for > 16-bit xfers and 2 bytes for > 8-bit xfers). Instead,
derive the correct size from realbits since it will always be correct
even when SPI offloading is used.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-vy: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-10-e48a489be48c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f063a28002 upstream.
The threaded IRQ function in this driver is reading the flag twice: once to
lock a mutex and once to unlock it. Even though the code setting the flag
is designed to prevent it, there are subtle cases where the flag could be
true at the mutex_lock stage and false at the mutex_unlock stage. This
results in the mutex not being unlocked, resulting in a deadlock.
Fix it by making the opt3001_irq() code generally more robust, reading the
flag into a variable and using the variable value at both stages.
Fixes: 94a9b7b180 ("iio: light: add support for TI's opt3001 light sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20250321-opt3001-irq-fix-v1-1-6c520d851562@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[Fixed conflict while applying on 6.12]
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bb49d94034 ]
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Fixes: a5bf6fdd19 ("iio:chemical:sps30: Fix timestamp alignment")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-5-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffbc26bc91 ]
On architectures where an s64 is not 64-bit aligned, this may result
insufficient alignment of the timestamp and the structure being too small.
Use aligned_s64 to force the alignment.
Fixes: a1caeebab0 ("iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()") # aligned_s64 newer
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-3-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffcd19e9f4 ]
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure the struct itself it also 8-byte aligned.
While touching this, convert struct mpr_chan to an anonymous struct
to consolidate the code a bit to make it easier for future readers.
Fixes: 713337d914 ("iio: pressure: Honeywell mprls0025pa pressure sensor")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250418-iio-more-timestamp-alignment-v2-2-d6a5d2b1c9fe@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ffa698674 ]
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Also move the unaligned.h header while touching this since it was the
only one not in alphabetical order.
Fixes: 13e945631c ("iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-4-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52d3498847 ]
On architectures where an s64 is only 32-bit aligned insufficient padding
would be left between the earlier elements and the timestamp. Use
aligned_s64 to enforce the correct placement and ensure the storage is
large enough.
Fixes: 54e018da31 ("iio:ad7266: Mark transfer buffer as __be16") # aligned_s64 is much newer.
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-2-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5097eaae98 ]
Here the lack of marking allows the overall structure to not be
sufficiently aligned resulting in misplacement of the timestamp
in iio_push_to_buffers_with_timestamp(). Use aligned_s64 to
force the alignment on all architectures.
Fixes: 7c0299e879 ("iio: adc: Add support for DLN2 ADC")
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bb942287e ]
The IIO ABI requires 64-bit aligned timestamps. In this case insufficient
padding would have been added on architectures where an s64 is only 32-bit
aligned. Use aligned_s64 to enforce the correct alignment.
Fixes: 327a0eaf19 ("iio: accel: adxl355: Add triggered buffer support")
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f79aeb6c63 ]
The trick of using __aligned(IIO_DMA_MINALIGN) ensures that there is
no overlap between buffers used for DMA and those used for driver
state storage that are before the marking. It doesn't ensure
anything above state variables found after the marking. Hence
move this particular bit of state earlier in the structure.
Fixes: 10897f3430 ("iio: temp: maxim_thermocouple: Fix alignment for DMA safety")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-14-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38f67d0264 ]
Fix setting the odr value to update activity time based on frequency
derrived by recent odr, and not by obsolete odr value.
The [small] bug: When _adxl367_set_odr() is called with a new odr value,
it first writes the new odr value to the hardware register
ADXL367_REG_FILTER_CTL.
Second, it calls _adxl367_set_act_time_ms(), which calls
adxl367_time_ms_to_samples(). Here st->odr still holds the old odr value.
This st->odr member is used to derrive a frequency value, which is
applied to update ADXL367_REG_TIME_ACT. Hence, the idea is to update
activity time, based on possibilities and power consumption by the
current ODR rate.
Finally, when the function calls return, again in _adxl367_set_odr() the
new ODR is assigned to st->odr.
The fix: When setting a new ODR value is set to ADXL367_REG_FILTER_CTL,
also ADXL367_REG_TIME_ACT should probably be updated with a frequency
based on the recent ODR value and not the old one. Changing the location
of the assignment to st->odr fixes this.
Fixes: cbab791c5e ("iio: accel: add ADXL367 driver")
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250309193515.2974-1-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8114ef86e2 upstream.
Prevent st_lsm6dsx_read_tagged_fifo from falling in an infinite loop in
case pattern_len is equal to zero and the device FIFO is not empty.
Fixes: 801a6e0af0 ("iio: imu: st_lsm6dsx: add support to LSM6DSO")
Signed-off-by: Silvano Seva <s.seva@4sigma.it>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250311085030.3593-4-s.seva@4sigma.it
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 159ca7f181 upstream.
Prevent st_lsm6dsx_read_fifo from falling in an infinite loop in case
pattern_len is equal to zero and the device FIFO is not empty.
Fixes: 290a6ce11d ("iio: imu: add support to lsm6dsx driver")
Signed-off-by: Silvano Seva <s.seva@4sigma.it>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250311085030.3593-2-s.seva@4sigma.it
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d2d8524ea upstream.
Align the buffer used with iio_push_to_buffers_with_timestamp() to
ensure the s64 timestamp is aligned to 8 bytes.
Fixes: 0829edc43e ("iio: imu: inv_mpu6050: read the full fifo when processing data")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-7-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 609bc31eca upstream.
The inclinometer channels were previously defined with 14 realbits.
However, the ADIS16201 datasheet states the resolution for these output
channels is 12 bits (Page 14, text description; Page 15, table 7).
Correct the realbits value to 12 to accurately reflect the hardware.
Fixes: f7fe1d1dd5 ("staging: iio: new adis16201 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250421131539.912966-1-gshahrouzi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 839f81de39 upstream.
clock_set_rate should be executed after devm_clk_get_enabled.
Fixes: 97ad10bb29 ("iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled")
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250312062016.137821-1-xxm@rock-chips.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f083f8a21c upstream.
Fix register read/write routine as per datasheet.
When reading multiple consecutive registers, only the first one is read
properly. This is due to missing chip select deassert and assert again
between first and second 16bit transfer, as shown in the datasheet
AD7606C-16, rev 0, figure 110.
Fixes: f2a22e1e17 ("iio: adc: ad7606: Add support for software mode for ad7616")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250418-wip-bl-ad7606-fix-reg-access-v3-1-d5eeb440c738@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8236644f5e ]
The ad7768-1 ADC output code is two's complement, meaning that the voltage
conversion result is a signed value.. Since the value is a 24 bit one,
stored in a 32 bit variable, the sign should be extended in order to get
the correct representation.
Also the channel description has been updated to signed representation,
to match the ADC specifications.
Fixes: a5f8c7da3d ("iio: adc: Add AD7768-1 ADC basic support")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://patch.msgid.link/505994d3b71c2aa38ba714d909a68e021f12124c.1741268122.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0af1c801a1 ]
The data used is all in local variables so there is no advantage
in setting *val = ret with the direct mode claim held.
Move it later to after error check.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250217141630.897334-13-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 8236644f5e ("iio: adc: ad7768-1: Fix conversion result sign")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee735aa33d ]
The array contains only 5 elements, but the index calculated by
veml6075_read_int_time_index can range from 0 to 7,
which could lead to out-of-bounds access. The check prevents this issue.
Coverity Issue
CID 1574309: (#1 of 1): Out-of-bounds read (OVERRUN)
overrun-local: Overrunning array veml6075_it_ms of 5 4-byte
elements at element index 7 (byte offset 31) using
index int_index (which evaluates to 7)
This is hardening against potentially broken hardware. Good to have
but not necessary to backport.
Fixes: 3b82f43238 ("iio: light: add VEML6075 UVA and UVB light sensor driver")
Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/Z7dnrEpKQdRZ2qFU@Emma
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
