[ Upstream commit 8b0587a885 ]
When port buffer headroom changes, port_update_shared_buffer()
recalculates the shared buffer size and splits it in a 3:1 ratio
(lossy:lossless) - Currently, the calculation is:
lossless = shared / 4;
lossy = (shared / 4) * 3;
Meaning, the calculation dropped the remainder of shared % 4 due to
integer division, unintentionally reducing the total shared buffer
by up to three cells on each update. Over time, this could shrink
the buffer below usable size.
Fix it by changing the calculation to:
lossless = shared / 4;
lossy = shared - lossless;
This retains all buffer cells while still approximating the
intended 3:1 split, preventing capacity loss over time.
While at it, perform headroom calculations in units of cells rather than
in bytes for more accurate calculations avoiding extra divisions.
Fixes: a440030d89 ("net/mlx5e: Update shared buffer along with device buffer changes")
Signed-off-by: Armen Ratner <armeng@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250820133209.389065-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 451d2849ea ]
The SW currently saves local buffer ownership when setting
the buffer.
This means that the SW assumes it has ownership of the buffer
after the command is set.
If setting the buffer fails and we remain in FW ownership,
the local buffer ownership state incorrectly remains as SW-owned.
This leads to incorrect behavior in subsequent PFC commands,
causing failures.
Instead of saving local buffer ownership in SW,
query the FW for buffer ownership when setting the buffer.
This ensures that the buffer ownership state is accurately
reflected, avoiding the issues caused by incorrect ownership
states.
Fixes: ecdf2dadee ("net/mlx5e: Receive buffer support for DCBX")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2f61f1db8 ]
The port header is a general file under include, yet it
contains declarations for functions that are either not
exported or exported but not used outside the mlx5_core
driver.
To enhance code organization, we move these declarations
to mlx5_core.h, where they are more appropriately scoped.
This refactor removes unnecessary exported symbols and
prevents unexported functions from being inadvertently
referenced outside of the mlx5_core driver.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250304160620.417580-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 451d2849ea ("net/mlx5e: Query FW for buffer ownership")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc17455bc8 ]
Adjust the vport number by the base ECVF vport number so the port
attributes start at 0. Previously the port attributes would start 1
after the maximum number of host VFs.
Fixes: dc13180824 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c5d95988c ]
Octeontx2/CN10K silicon supports generating a 256-bit key per packet.
The specific fields to be extracted from a packet for key generation
are configurable via a Key Extraction (MKEX) Profile.
The AF driver scans the configured extraction profile to ensure that
fields from upper layers do not overwrite fields from lower layers in
the key.
Example Packet Field Layout:
LA: DMAC + SMAC
LB: VLAN
LC: IPv4/IPv6
LD: TCP/UDP
Valid MKEX Profile Configuration:
LA -> DMAC -> key_offset[0-5]
LC -> SIP -> key_offset[20-23]
LD -> SPORT -> key_offset[30-31]
Invalid MKEX profile configuration:
LA -> DMAC -> key_offset[0-5]
LC -> SIP -> key_offset[20-23]
LD -> SPORT -> key_offset[2-3] // Overlaps with DMAC field
In another scenario, if the MKEX profile is configured to extract
the SPI field from both AH and ESP headers at the same key offset,
the driver rejecting this configuration. In a regular traffic,
ipsec packet will be having either AH(LD) or ESP (LE). This patch
relaxes the check for the same.
Fixes: 12aa0a3b93 ("octeontx2-af: Harden rule validation.")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250820063919.1463518-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1468c1f97c ]
Device ID comparison in igc_is_device_id_i226 is performed before
the ID is set, resulting in always failing check on init.
Before the patch:
* L1.2 is not disabled on init
* L1.2 is properly disabled after suspend-resume cycle
With the patch:
* L1.2 is properly disabled both on init and after suspend-resume
How to test:
Connect to the 1G link with 300+ mbit/s Internet speed, and run
the download speed test, such as:
curl -o /dev/null http://speedtest.selectel.ru/1GB
Without L1.2 disabled, the speed would be no more than ~200 mbit/s.
With L1.2 disabled, the speed would reach 1 gbit/s.
Note: it's required that the latency between your host and the remote
be around 3-5 ms, the test inside LAN (<1 ms latency) won't trigger the
issue.
Link: https://lore.kernel.org/intel-wired-lan/15248b4f-3271-42dd-8e35-02bfc92b25e1@intel.com
Fixes: 0325143b59 ("igc: disable L1.2 PCI-E link substate to avoid performance issue")
Signed-off-by: ValdikSS <iam@valdikss.org.ru>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250819222000.3504873-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d4d9ef9df ]
Resolve the budget negative overflow which leads to returning true in
ixgbe_xmit_zc even when the budget of descs are thoroughly consumed.
Before this patch, when the budget is decreased to zero and finishes
sending the last allowed desc in ixgbe_xmit_zc, it will always turn back
and enter into the while() statement to see if it should keep processing
packets, but in the meantime it unexpectedly decreases the value again to
'unsigned int (0--)', namely, UINT_MAX. Finally, the ixgbe_xmit_zc returns
true, showing 'we complete cleaning the budget'. That also means
'clean_complete = true' in ixgbe_poll.
The true theory behind this is if that budget number of descs are consumed,
it implies that we might have more descs to be done. So we should return
false in ixgbe_xmit_zc to tell napi poll to find another chance to start
polling to handle the rest of descs. On the contrary, returning true here
means job done and we know we finish all the possible descs this time and
we don't intend to start a new napi poll.
It is apparently against our expectations. Please also see how
ixgbe_clean_tx_irq() handles the problem: it uses do..while() statement
to make sure the budget can be decreased to zero at most and the negative
overflow never happens.
The patch adds 'likely' because we rarely would not hit the loop condition
since the standard budget is 256.
Fixes: 8221c5eba8 ("ixgbe: add AF_XDP zero-copy Tx support")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Priya Singh <priyax.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250819222000.3504873-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cd58fec91 ]
Fix missing configuration for LAN865x silicon revisions B0 and B1 as per
Microchip Application Note AN1760 (Rev F, June 2024).
The Timer Increment register was not being set, which is required for
accurate timestamping. As per the application note, configure the MAC to
set timestamping at the end of the Start of Frame Delimiter (SFD), and
set the Timer Increment register to 40 ns (corresponding to a 25 MHz
internal clock).
Link: https://www.microchip.com/en-us/application-notes/an1760
Fixes: 5cd2340cb6 ("microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHY")
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250818060514.52795-3-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1683fd1b2f ]
This fixes an issue where the transmit queue is started implicitly only
the very first time the device is registered. When the device is taken
down and brought back up again (using `ip` or `ifconfig`), the transmit
queue is not restarted, causing packet transmission to hang.
Adding an explicit call to netif_start_queue() in lan865x_net_open()
ensures the transmit queue is properly started every time the device
is reopened.
Fixes: 5cd2340cb6 ("microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHY")
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20250818060514.52795-2-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75a9a46d67 ]
A crash can occur if an ethtool operation is invoked
after shutdown() is called.
shutdown() is invoked during system shutdown to stop DMA operations
without performing expensive deallocations. It is discouraged to
unregister the netdev in this path, so the device may still be visible
to userspace and kernel helpers.
In gve, shutdown() tears down most internal data structures. If an
ethtool operation is dispatched after shutdown(), it will dereference
freed or NULL pointers, leading to a kernel panic. While graceful
shutdown normally quiesces userspace before invoking the reboot
syscall, forced shutdowns (as observed on GCP VMs) can still trigger
this path.
Fix by calling netif_device_detach() in shutdown().
This marks the device as detached so the ethtool ioctl handler
will skip dispatching operations to the driver.
Fixes: 974365e518 ("gve: Implement suspend/resume/shutdown")
Signed-off-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Link: https://patch.msgid.link/20250818211245.1156919-1-jeroendb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01792bc3e5 ]
To enable HSR / Switch offload, certain configurations are needed.
Currently they are done inside icssg_change_mode(). This function only
gets called if we move from one mode to another without bringing the
links up / down.
Once in HSR / Switch mode, if we bring the links down and bring it back
up again. The callback sequence is,
- emac_ndo_stop()
Firmwares are stopped
- emac_ndo_open()
Firmwares are loaded
In this path icssg_change_mode() doesn't get called and as a result the
configurations needed for HSR / Switch is not done.
To fix this, put all these configurations in a separate function
icssg_enable_fw_offload() and call this from both icssg_change_mode()
and emac_ndo_open()
Fixes: 56375086d0 ("net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20250814105106.1491871-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f604d3aaf6 ]
By default, the device does not forward IPv4 packets with a link-local
source IP (i.e., 169.254.0.0/16). This behavior does not align with the
kernel which does forward them.
Fix by instructing the device to forward such packets instead of
dropping them.
Fixes: ca360db4b8 ("mlxsw: spectrum: Disable DIP_LINK_LOCAL check in hardware pipeline")
Reported-by: Zoey Mertes <zoey@cloudflare.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/6721e6b2c96feb80269e72ce8d0b426e2f32d99c.1755174341.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 065c31f2c6 ]
The CRC error bit is located at bit 17 in the Rx descriptor, but the
driver was incorrectly using bit 16. Fix it.
Fixes: a36e9f5cfe ("rtase: Add support for a pci table in this module")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20250813071631.7566-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd980bf6e9 ]
Submit multiple descriptors in axienet_rx_cb() to fill Rx skb ring. This
ensures the ring "catches up" on previously missed allocations.
Increment Rx skb ring head pointer after BD is successfully allocated.
Previously, head pointer was incremented before verifying if descriptor is
successfully allocated and has valid entries, which could lead to ring
state inconsistency if descriptor setup failed.
These changes improve reliability by maintaining adequate descriptor
availability and ensuring proper ring buffer state management.
Fixes: 6a91b846af ("net: axienet: Introduce dmaengine support")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Link: https://patch.msgid.link/20250813135559.1555652-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9080abea1 ]
Since the kern_dbpage gets set up in ionic_lif_init() and that
function's error path will clean it if needed, the kern_dbpage
on teardown should be cleaned in ionic_lif_deinit(), not in
ionic_lif_free(). As it is currently we get a double call
to iounmap() on kern_dbpage if the PCI ionic fails setting up
the lif. One example of this is when firmware isn't responding
to AdminQ requests and ionic's first AdminQ call fails to
setup the NotifyQ.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b11344f63f ]
In gve_adminq_issue_cmd(), return -EINVAL instead of 0 when an unknown
admin queue command opcode is encountered.
This prevents the function from silently succeeding on invalid input
and prevents undefined behavior by ensuring the function fails gracefully
when an unrecognized opcode is provided.
These changes improve error handling.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250616054504.1644770-2-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8155c1df5 ]
This effectively reverts 6e8b0ff1ba ("dpaa_eth: Add change_carrier()
for Fixed PHYs"). Usage of fixed_phy_change_carrier() requires that
fixed_phy_register() has been called before, directly or indirectly.
And that's not the case in this driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/7eb189b3-d5fd-4be6-8517-a66671a4e4e3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7ad21258f ]
In the current implementation, IP coalescing is always enabled and
cannot be disabled.
As setting maximum frames to 0 or 1, or setting delay to zero implies
immediate delivery of single packets/IRQs, disable coalescing in
hardware in these cases.
This also guarantees that coalescing is never enabled with ICFT or ICTT
set to zero, a configuration that could lead to unpredictable behaviour
according to i.MX8MP reference manual.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250626-fec_deactivate_coalescing-v2-1-0b217f2e80da@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fad9cf2165 ]
Aquantia AQC113(C) using ATL2FW doesn't properly prepare the NIC for
enabling wake-on-lan. The FW operation `set_power` was only implemented
for `hw_atl` and not `hw_atl2`. Implement the `set_power` functionality
for `hw_atl2`.
Tested with both AQC113 and AQC113C devices. Confirmed you can shutdown
the system and wake from S5 using magic packets. NIC was previously
powered off when entering S5. If the NIC was configured for WOL by the
Windows driver, loading the atlantic driver would disable WOL.
Partially cherry-picks changes from commit,
37bd5cc
Attributing original authors from Marvell for the referenced commit.
Closes: https://github.com/Aquantia/AQtion/issues/70
Co-developed-by: Igor Russkikh <irusskikh@marvell.com>
Co-developed-by: Mark Starovoitov <mstarovoitov@marvell.com>
Co-developed-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Co-developed-by: Pavel Belous <pbelous@marvell.com>
Co-developed-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Eric Work <work.eric@gmail.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://patch.msgid.link/20250629051535.5172-1-work.eric@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53d20606c4 ]
The buffer bgx_sel used in snprintf() was too small to safely hold
the formatted string "BGX%d" for all valid bgx_id values. This caused
a -Wformat-truncation warning with `Werror` enabled during build.
Increase the buffer size from 5 to 7 and use `sizeof(bgx_sel)` in
snprintf() to ensure safety and suppress the warning.
Build warning:
CC drivers/net/ethernet/cavium/thunder/thunder_bgx.o
drivers/net/ethernet/cavium/thunder/thunder_bgx.c: In function
‘bgx_acpi_match_id’:
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:27: error: ‘%d’
directive output may be truncated writing between 1 and 3 bytes into a
region of size 2 [-Werror=format-truncation=]
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
^~
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:23: note:
directive argument in the range [0, 255]
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
^~~~~~~
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:2: note:
‘snprintf’ output between 5 and 7 bytes into a destination of size 5
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
compiler warning due to insufficient snprintf buffer size.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250711140532.2463602-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a601b2d35 ]
qdisc_sleeping variable is declared as "struct Qdisc __rcu" and
as such needs proper annotation while accessing it.
Without rtnl_dereference(), the following error is generated by sparse:
drivers/net/ethernet/mellanox/mlx5/core/en/qos.c:377:40: warning:
incorrect type in initializer (different address spaces)
drivers/net/ethernet/mellanox/mlx5/core/en/qos.c:377:40: expected
struct Qdisc *qdisc
drivers/net/ethernet/mellanox/mlx5/core/en/qos.c:377:40: got struct
Qdisc [noderef] __rcu *qdisc_sleeping
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1752675472-201445-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96a1e15e60 ]
The DMA map functions can fail and should be tested for errors.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250716095733.37452-3-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d61f6cb6f6 ]
The DMA map functions can fail and should be tested for errors.
If the mapping fails, unmap and return an error.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250716094733.28734-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1e3fec3e3 ]
The IRQ coalescing config currently reside only inside struct
idpf_q_vector. However, all idpf_q_vector structs are de-allocated and
re-allocated during resets. This leads to user-set coalesce configuration
to be lost.
Add new fields to struct idpf_vport_user_config_data to save the user
settings and re-apply them after reset.
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4701ee5044 ]
The TCP header fields seq and ack_seq are 32-bit values in network
byte order as (__be32). these fields were earlier printed using
ntohs(), which converts only 16-bit values and produces incorrect
results for 32-bit fields. This patch is changeing the conversion
to ntohl(), ensuring correct interpretation of these sequence numbers.
Notably, the format specifier is updated from %d to %u to reflect the
unsigned nature of these fields.
improves the accuracy of debug log messages for TCP sequence and
acknowledgment numbers during TX timeouts.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717193552.3648791-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f1d1d14db ]
The variable ret in icss_iep_extts_enable() was incorrectly declared
as u32, while the function returns int and may return negative error
codes. This will cause sign extension issues and incorrect error
propagation. Update ret to be int to fix error handling.
This change corrects the declaration to avoid potential type mismatch.
Fixes: c1e0230eea ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250805142323.1949406-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06feac1540 ]
When link settings are changed emac->speed is populated by
emac_adjust_link(). The link speed and other settings are then written into
the DRAM. However if both ports are brought down after this and brought up
again or if the operating mode is changed and a firmware reload is needed,
the DRAM is cleared by icssg_config(). As a result the link settings are
lost.
Fix this by calling emac_adjust_link() after icssg_config(). This re
populates the settings in the DRAM after a new firmware load.
Fixes: 9facce84f4 ("net: ti: icssg-prueth: Fix firmware load sequence.")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Message-ID: <20250805173812.2183161-1-danishanwar@ti.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3fa840230f upstream.
Make sure to drop the reference to the ptp device taken by
of_find_device_by_node() when querying the time stamping capabilities.
Note that holding a reference to the ptp device does not prevent its
driver data from going away.
Fixes: 17ae0b0ee9 ("dpaa_eth: add the get_ts_info interface for ethtool")
Cc: stable@vger.kernel.org # 4.19
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-2-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e05c54974a upstream.
Make sure to drop the references to the IEP OF node and device taken by
of_parse_phandle() and of_find_device_by_node() when looking up IEP
devices during probe.
Drop the bogus additional reference taken on successful lookup so that
the device is released correctly by icss_iep_put().
Fixes: c1e0230eea ("net: ti: icss-iep: Add IEP driver")
Cc: stable@vger.kernel.org # 6.6
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-6-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e13274ca8 upstream.
The reference count to the WED devices has already been incremented when
looking them up using of_find_device_by_node() so drop the bogus
additional reference taken during probe.
Fixes: 804775dfc2 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Cc: stable@vger.kernel.org # 5.19
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-5-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70458f8a6b upstream.
Make sure to drop the references to the IERB OF node and platform device
taken by of_parse_phandle() and of_find_device_by_node() during probe.
Fixes: e7d48e5fbf ("net: enetc: add a mini driver for the Integrated Endpoint Register Block")
Cc: stable@vger.kernel.org # 5.13
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-3-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da717540ac upstream.
Make sure to drop the reference to the ptp device taken by
of_find_device_by_node() when querying the time stamping capabilities.
Note that holding a reference to the ptp device does not prevent its
driver data from going away.
Fixes: 7349a74ea7 ("net: ethernet: gianfar_ethtool: get phc index through drvdata")
Cc: stable@vger.kernel.org # 4.18
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725171213.880-4-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e88fbc30dd upstream.
After the call to phy_disconnect() netdev->phydev is reset to NULL.
So fixed_phy_unregister() would be called with a NULL pointer as argument.
Therefore cache the phy_device before this call.
Fixes: e24a6c8746 ("net: ftgmac100: Get link speed and duplex for NC-SI")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Link: https://patch.msgid.link/2b80a77a-06db-4dd7-85dc-3a8e0de55a1d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5a441ae28 upstream.
Set use_nsecs=true as timestamp is reported in ns. Lack of this result
in smaller timestamp error window which cause error during phc2sys
execution on E825 NICs:
phc2sys[1768.256]: ioctl PTP_SYS_OFFSET_PRECISE: Invalid argument
This problem was introduced in the cited commit which omitted setting
use_nsecs to true when converting the ice driver to use
convert_base_to_cs().
Testing hints (ethX is PF netdev):
phc2sys -s ethX -c CLOCK_REALTIME -O 37 -m
phc2sys[1769.256]: CLOCK_REALTIME phc offset -5 s0 freq -0 delay 0
Fixes: d4bea547eb ("ice/ptp: Remove convert_art_to_tsc()")
Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Markus Blöchl <markus@blochl.de>
[ Upstream commit e407fceeaf ]
Alex added page bias of LONG_MAX, which is admittedly quite
a clever way of catching overflows of the pp ref count.
The page pool code was "optimized" to leave the ref at 1
for freed pages so it can't catch basic bugs by itself any more.
(Something we should probably address under DEBUG_NET...)
Unfortunately for fbnic since commit f7dc3248dc ("skbuff: Optimization
of SKB coalescing for page pool") core _may_ actually take two extra
pp refcounts, if one of them is returned before driver gives up the bias
the ret < 0 check in page_pool_unref_netmem() will trigger.
While at it add a FBNIC_ to the name of the driver constant.
Fixes: 0cb4c0a137 ("eth: fbnic: Implement Rx queue alloc/start/stop/free")
Link: https://patch.msgid.link/20250801170754.2439577-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77bf1c55b2 ]
When gso_segs is left at 0, a number of assumptions will end up being
incorrect throughout the stack.
For example, in the GRO-path, we set NAPI_GRO_CB()->count to gso_segs.
So, if a non-LRO'ed packet followed by an LRO'ed packet is being
processed in GRO, the first one will have NAPI_GRO_CB()->count set to 1 and
the next one to 0 (in dev_gro_receive()).
Since commit 531d0d32de
("net/mlx5: Correctly set gso_size when LRO is used")
these packets will get merged (as their gso_size now matches).
So, we end up in gro_complete() with NAPI_GRO_CB()->count == 1 and thus
don't call inet_gro_complete(). Meaning, checksum-validation in
tcp_checksum_complete() will fail with a "hw csum failure".
Even before the above mentioned commit, incorrect gso_segs means that other
things like TCP's accounting of incoming packets (tp->segs_in,
data_segs_in, rcv_ooopack) will be incorrect. Which means that if one
does bytes_received/data_segs_in, the result will be bigger than the
MTU.
Fix this by initializing gso_segs correctly when LRO is used.
Fixes: e586b3b0ba ("net/mlx5: Ethernet Datapath files")
Reported-by: Gal Pressman <gal@nvidia.com>
Closes: https://lore.kernel.org/netdev/6583783f-f0fb-4fb1-a415-feec8155bc69@nvidia.com/
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250729-mlx5_gso_segs-v1-1-b48c480c1c12@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2764ab51d5 ]
A negative overflow can happen when the budget number of descs are
consumed. as long as the budget is decreased to zero, it will again go
into while (budget-- > 0) statement and get decreased by one, so the
overflow issue can happen. It will lead to returning true whereas the
expected value should be false.
In this case where all the budget is used up, it means zc function
should return false to let the poll run again because normally we
might have more data to process. Without this patch, zc function would
return true instead.
Fixes: 132c32ee5b ("net: stmmac: Add TX via XDP zero-copy socket")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20250723142327.85187-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd4b97246a ]
When updating the PBMC register, we read its current value,
modify desired fields, then write it back.
The port_buffer_size field within PBMC is Read-Only (RO).
If this RO field contains a non-zero value when read,
attempting to write it back will cause the entire PBMC
register update to fail.
This commit ensures port_buffer_size is explicitly cleared
to zero after reading the PBMC register but before writing
back the modified value.
This allows updates to other fields in the PBMC register to succeed.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1753256672-337784-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24171a5a4a ]
With large values of CONFIG_NR_CPUS, three Intel ethernet drivers fail to
compile like:
In function ‘i40e_free_q_vector’,
inlined from ‘i40e_vsi_alloc_q_vectors’ at drivers/net/ethernet/intel/i40e/i40e_main.c:12112:3:
571 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
include/linux/rcupdate.h:1084:17: note: in expansion of macro ‘BUILD_BUG_ON’
1084 | BUILD_BUG_ON(offsetof(typeof(*(ptr)), rhf) >= 4096); \
drivers/net/ethernet/intel/i40e/i40e_main.c:5113:9: note: in expansion of macro ‘kfree_rcu’
5113 | kfree_rcu(q_vector, rcu);
| ^~~~~~~~~
The problem is that the 'rcu' member in 'q_vector' is too far from the start
of the structure. Move this member before the CPU mask instead, in all three
drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4ff12d82da upstream.
Add check for the return value of devm_kmemdup()
to prevent potential null pointer dereference.
Fixes: c764881096 ("ice: Implement Dynamic Device Personalization (DDP) download")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b03f15c019 upstream.
gve_tx_timeout was calculating missed completions in a way that is only
relevant in the GQ queue format. Additionally, it was attempting to
disable device interrupts, which is not needed in either GQ or DQ queue
formats.
As a result, TX timeouts with the DQ queue format likely would have
triggered early resets without kicking the queue at all.
This patch drops the check for pending work altogether and always kicks
the queue after validating the queue has not seen a TX timeout too
recently.
Cc: stable@vger.kernel.org
Fixes: 87a7f321bb ("gve: Recover from queue stall due to missed IRQ")
Co-developed-by: Tim Hostetler <thostet@google.com>
Signed-off-by: Tim Hostetler <thostet@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250717192024.1820931-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61114910a5 upstream.
As described by Vitaly Lifshits:
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set.
Unfortunately some systems have left the factory with an uninitialized
value of 0xFFFF at register address 0x3F (checksum word location).
So on Tiger Lake platform we ignore the computed checksum when such
condition is encountered.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info>
Tested-by: Vlad URSU <vlad@ursu.me>
Fixes: 4051f68318 ("e1000e: Do not take care about recovery NVM checksum")
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 536fd741c7 upstream.
As described by Vitaly Lifshits:
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set. Since Tiger Lake devices were the first to have
> this lock, some systems in the field did not meet this requirement.
> Therefore, for these transitional devices we skip checksum update and
> verification, if the valid bit is not set.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Fixes: 4051f68318 ("e1000e: Do not take care about recovery NVM checksum")
Cc: stable@vger.kernel.org
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96e056ffba upstream.
The fsl_mc_get_endpoint() function uses device_find_child() for
localization, which implicitly calls get_device() to increment the
device's reference count before returning the pointer. However, the
caller dpaa2_switch_port_connect_mac() fails to properly release this
reference in multiple scenarios. We should call put_device() to
decrement reference count properly.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 84cba72956 ("dpaa2-switch: integrate the MAC endpoint support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717022309.3339976-3-make24@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee9f3a81ab upstream.
The fsl_mc_get_endpoint() function uses device_find_child() for
localization, which implicitly calls get_device() to increment the
device's reference count before returning the pointer. However, the
caller dpaa2_eth_connect_mac() fails to properly release this
reference in multiple scenarios. We should call put_device() to
decrement reference count properly.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 7194792308 ("dpaa2-eth: add MAC/PHY support through phylink")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717022309.3339976-2-make24@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 49ade8630f ]
The SMMU engine on HIP09 chip has a hardware issue.
SMMU pagetable prefetch features may prefetch and use a invalid PTE
even the PTE is valid at that time. This will cause the device trigger
fake pagefaults. The solution is to avoid prefetching by adding a
SYNC command when smmu mapping a iova. But the performance of nic has a
sharp drop. Then we do this workaround, always enable tx bounce buffer,
avoid mapping/unmapping on TX path.
This issue only affects HNS3, so we always enable
tx bounce buffer when smmu enabled to improve performance.
Fixes: 295ba232a8 ("net: hns3: add device version to replace pci revision")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-5-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>