[ Upstream commit 1d3b4bec3c ]
First of all, tell it how many slots do we want, not which slot
is wanted. It makes one caller (dup_fd()) more straightforward
and doesn't harm another (expand_fdtable()).
Furthermore, make it return ERR_PTR() on failure rather than
returning NULL. Simplifies the callers.
Simplify the size calculation, while we are at it - note that we
always have slots_wanted greater than BITS_PER_LONG. What the
rules boil down to is
* use the smallest power of two large enough to give us
that many slots
* on 32bit skip 64 and 128 - the minimal capacity we want
there is 256 slots (i.e. 1Kb fd array).
* on 64bit don't skip anything, the minimal capacity is
128 - and we'll never be asked for 64 or less. 128 slots means
1Kb fd array, again.
* on 128bit, if that ever happens, don't skip anything -
we'll never be asked for 128 or less, so the fd array allocation
will be at least 2Kb.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 453a6d2a68 ]
Fix smb3_init_transform_rq() to initialise buffer to NULL before calling
netfs_alloc_folioq_buffer() as netfs assumes it can append to the buffer it
is given. Setting it to NULL means it should start a fresh buffer, but the
value is currently undefined.
Fixes: a2906d3316 ("cifs: Switch crypto buffer to use a folio_queue rather than an xarray")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5f1c8965e7 upstream.
ovl_create_temp() treats "workdir" as a parent in which it creates an
object so it should use I_MUTEX_PARENT.
Prior to the commit identified below the lock was taken by the caller
which sometimes used I_MUTEX_PARENT and sometimes used I_MUTEX_NORMAL.
The use of I_MUTEX_NORMAL was incorrect but unfortunately copied into
ovl_create_temp().
Note to backporters: This patch only applies after the last Fixes given
below (post v6.16). To fix the bug in v6.7 and later the
inode_lock() call in ovl_copy_up_workdir() needs to nest using
I_MUTEX_PARENT.
Link: https://lore.kernel.org/all/67a72070.050a0220.3d72c.0022.GAE@google.com/
Cc: stable@vger.kernel.org
Reported-by: syzbot+7836a68852a10ec3d790@syzkaller.appspotmail.com
Tested-by: syzbot+7836a68852a10ec3d790@syzkaller.appspotmail.com
Fixes: c63e56a4a6 ("ovl: do not open/llseek lower file with upper sb_writers held")
Fixes: d2c995581c ("ovl: Call ovl_create_temp() without lock held.")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cffd044187 ]
do_change_type() and do_set_group() are operating on different
aspects of the same thing - propagation graph. The latter
asks for mounts involved to be mounted in namespace(s) the caller
has CAP_SYS_ADMIN for. The former is a mess - originally it
didn't even check that mount *is* mounted. That got fixed,
but the resulting check turns out to be too strict for userland -
in effect, we check that mount is in our namespace, having already
checked that we have CAP_SYS_ADMIN there.
What we really need (in both cases) is
* only touch mounts that are mounted. That's a must-have
constraint - data corruption happens if it get violated.
* don't allow to mess with a namespace unless you already
have enough permissions to do so (i.e. CAP_SYS_ADMIN in its userns).
That's an equivalent of what do_set_group() does; let's extract that
into a helper (may_change_propagation()) and use it in both
do_set_group() and do_change_type().
Fixes: 12f147ddd6 "do_change_type(): refuse to operate on unmounted/not ours mounts"
Acked-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Tested-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7375f22495 ]
There's issue as follows:
BUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110
Read of size 8 at addr ffffc9000168f7f8 by task swapper/3/0
CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x2c/0x390
print_report+0xb4/0x270
kasan_report+0xb8/0xf0
end_buffer_read_sync+0xe3/0x110
end_bio_bh_io_sync+0x56/0x80
blk_update_request+0x30a/0x720
scsi_end_request+0x51/0x2b0
scsi_io_completion+0xe3/0x480
? scsi_device_unbusy+0x11e/0x160
blk_complete_reqs+0x7b/0x90
handle_softirqs+0xef/0x370
irq_exit_rcu+0xa5/0xd0
sysvec_apic_timer_interrupt+0x6e/0x90
</IRQ>
Above issue happens when do ntfs3 filesystem mount, issue may happens
as follows:
mount IRQ
ntfs_fill_super
read_cache_page
do_read_cache_folio
filemap_read_folio
mpage_read_folio
do_mpage_readpage
ntfs_get_block_vbo
bh_read
submit_bh
wait_on_buffer(bh);
blk_complete_reqs
scsi_io_completion
scsi_end_request
blk_update_request
end_bio_bh_io_sync
end_buffer_read_sync
__end_buffer_read_notouch
unlock_buffer
wait_on_buffer(bh);--> return will return to caller
put_bh
--> trigger stack-out-of-bounds
In the mpage_read_folio() function, the stack variable 'map_bh' is
passed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and
wait_on_buffer() returns to continue processing, the stack variable
is likely to be reclaimed. Consequently, during the end_buffer_read_sync()
process, calling put_bh() may result in stack overrun.
If the bh is not allocated on the stack, it belongs to a folio. Freeing
a buffer head which belongs to a folio is done by drop_buffers() which
will fail to free buffers which are still locked. So it is safe to call
put_bh() before __end_buffer_read_notouch().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/20250811141830.343774-1-yebin@huaweicloud.com
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bac7b996d4 ]
We can't call destroy_workqueue(smb_direct_wq); before stop_sessions()!
Otherwise already existing connections try to use smb_direct_wq as
a NULL pointer.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ba6cc29351 upstream.
Mount options (uid, gid, mode) are silently ignored when debugfs is
mounted. This is a regression introduced during the conversion to the
new mount API.
When the mount API conversion was done, the parsed options were never
applied to the superblock when it was reused. As a result, the mount
options were ignored when debugfs was mounted.
Fix this by following the same pattern as the tracefs fix in commit
e4d32142d1 ("tracing: Fix tracefs mount options"). Call
debugfs_reconfigure() in debugfs_get_tree() to apply the mount options
to the superblock after it has been created or reused.
As an example, with the bug the "mode" mount option is ignored:
$ mount -o mode=0666 -t debugfs debugfs /tmp/debugfs_test
$ mount | grep debugfs_test
debugfs on /tmp/debugfs_test type debugfs (rw,relatime)
$ ls -ld /tmp/debugfs_test
drwx------ 25 root root 0 Aug 4 14:16 /tmp/debugfs_test
With the fix applied, it works as expected:
$ mount -o mode=0666 -t debugfs debugfs /tmp/debugfs_test
$ mount | grep debugfs_test
debugfs on /tmp/debugfs_test type debugfs (rw,relatime,mode=666)
$ ls -ld /tmp/debugfs_test
drw-rw-rw- 37 root root 0 Aug 2 17:28 /tmp/debugfs_test
Fixes: a20971c187 ("vfs: Convert debugfs to use the new mount API")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220406
Cc: stable <stable@kernel.org>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Link: https://lore.kernel.org/r/20250816-debugfs-mount-opts-v3-1-d271dad57b5b@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b1511360c8 ]
btrfs_subpage_set_writeback() calls folio_start_writeback() the first time
a folio is written back, and it also clears the PAGECACHE_TAG_TOWRITE tag
even if there are still dirty blocks in the folio. This can break ordering
guarantees, such as those required by btrfs_wait_ordered_extents().
That ordering breakage leads to a real failure. For example, running
generic/464 on a zoned setup will hit the following ASSERT. This happens
because the broken ordering fails to flush existing dirty pages before the
file size is truncated.
assertion failed: !list_empty(&ordered->list) :: 0, in fs/btrfs/zoned.c:1899
------------[ cut here ]------------
kernel BUG at fs/btrfs/zoned.c:1899!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 1906169 Comm: kworker/u130:2 Kdump: loaded Not tainted 6.16.0-rc6-BTRFS-ZNS+ #554 PREEMPT(voluntary)
Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
RIP: 0010:btrfs_finish_ordered_zoned.cold+0x50/0x52 [btrfs]
RSP: 0018:ffffc9002efdbd60 EFLAGS: 00010246
RAX: 000000000000004c RBX: ffff88811923c4e0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff827e38b1 RDI: 00000000ffffffff
RBP: ffff88810005d000 R08: 00000000ffffdfff R09: ffffffff831051c8
R10: ffffffff83055220 R11: 0000000000000000 R12: ffff8881c2458c00
R13: ffff88811923c540 R14: ffff88811923c5e8 R15: ffff8881c1bd9680
FS: 0000000000000000(0000) GS:ffff88a04acd0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f907c7a918c CR3: 0000000004024000 CR4: 0000000000350ef0
Call Trace:
<TASK>
? srso_return_thunk+0x5/0x5f
btrfs_finish_ordered_io+0x4a/0x60 [btrfs]
btrfs_work_helper+0xf9/0x490 [btrfs]
process_one_work+0x204/0x590
? srso_return_thunk+0x5/0x5f
worker_thread+0x1d6/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0x118/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x205/0x260
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Consider process A calling writepages() with WB_SYNC_NONE. In zoned mode or
for compressed writes, it locks several folios for delalloc and starts
writing them out. Let's call the last locked folio folio X. Suppose the
write range only partially covers folio X, leaving some pages dirty.
Process A calls btrfs_subpage_set_writeback() when building a bio. This
function call clears the TOWRITE tag of folio X, whose size = 8K and
the block size = 4K. It is following state.
0 4K 8K
|/////|/////| (flag: DIRTY, tag: DIRTY)
<-----> Process A will write this range.
Now suppose process B concurrently calls writepages() with WB_SYNC_ALL. It
calls tag_pages_for_writeback() to tag dirty folios with
PAGECACHE_TAG_TOWRITE. Since folio X is still dirty, it gets tagged. Then,
B collects tagged folios using filemap_get_folios_tag() and must wait for
folio X to be written before returning from writepages().
0 4K 8K
|/////|/////| (flag: DIRTY, tag: DIRTY|TOWRITE)
However, between tagging and collecting, process A may call
btrfs_subpage_set_writeback() and clear folio X's TOWRITE tag.
0 4K 8K
| |/////| (flag: DIRTY|WRITEBACK, tag: DIRTY)
As a result, process B won't see folio X in its batch, and returns without
waiting for it. This breaks the WB_SYNC_ALL ordering requirement.
Fix this by using btrfs_subpage_set_writeback_keepwrite(), which retains
the TOWRITE tag. We now manually clear the tag only after the folio becomes
clean, via the xas operation.
Fixes: 3470da3b7d ("btrfs: subpage: introduce helpers for writeback status")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f2326fd14a ]
IMA testing revealed that after an ext4 remount, file accesses triggered
full measurements even without modifications, instead of skipping as
expected when i_version is unchanged.
Debugging showed `SB_I_VERSION` was cleared in reconfigure_super() during
remount due to commit 1ff2030739 ("ext4: unconditionally enable the
i_version counter") removing the fix from commit 960e0ab63b ("ext4: fix
i_version handling on remount").
To rectify this, `SB_I_VERSION` is always set for `fc->sb_flags` in
ext4_init_fs_context(), instead of `sb->s_flags` in __ext4_fill_super(),
ensuring it persists across all mounts.
Cc: stable@kernel.org
Fixes: 1ff2030739 ("ext4: unconditionally enable the i_version counter")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250703073903.6952-2-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b64700d41b upstream.
If sb_min_blocksize returns 0, squashfs_fill_super exits without freeing
allocated memory (sb->s_fs_info).
Fix this by moving the call to sb_min_blocksize to before memory is
allocated.
Link: https://lkml.kernel.org/r/20250811223740.110392-1-phillip@squashfs.org.uk
Fixes: 734aa85390 ("Squashfs: check return result of sb_min_blocksize")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: Scott GUO <scottzhguo@tencent.com>
Closes: https://lore.kernel.org/all/20250811061921.3807353-1-scott_gzh@163.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76d2e3890f upstream.
After nfs_lock_and_join_requests() tests for whether the request is
still attached to the mapping, nothing prevents a call to
nfs_inode_remove_request() from succeeding until we actually lock the
page group.
The reason is that whoever called nfs_inode_remove_request() doesn't
necessarily have a lock on the page group head.
So in order to avoid races, let's take the page group lock earlier in
nfs_lock_and_join_requests(), and hold it across the removal of the
request in nfs_inode_remove_request().
Reported-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Joe Quanaim <jdq@meta.com>
Tested-by: Andrew Steffen <aksteffen@meta.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: bd37d6fce1 ("NFSv4: Convert nfs_lock_and_join_requests() to use nfs_page_find_head_request()")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a3de58b12c ]
If all the subrequests in an unbuffered write stream fail, the subrequest
collector doesn't update the stream->transferred value and it retains its
initial LONG_MAX value. Unfortunately, if all active streams fail, then we
take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set
in wreq->transferred - which is then returned from ->write_iter().
LONG_MAX was chosen as the initial value so that all the streams can be
quickly assessed by taking the smallest value of all stream->transferred -
but this only works if we've set any of them.
Fix this by adding a flag to indicate whether the value in
stream->transferred is valid and checking that when we integrate the
values. stream->transferred can then be initialised to zero.
This was found by running the generic/750 xfstest against cifs with
cache=none. It splices data to the target file. Once (if) it has used up
all the available scratch space, the writes start failing with ENOSPC.
This causes ->write_iter() to fail. However, it was returning
wreq->transferred, i.e. LONG_MAX, rather than an error (because it thought
the amount transferred was non-zero) and iter_file_splice_write() would
then try to clean up that amount of pipe bufferage - leading to an oops
when it overran. The kernel log showed:
CIFS: VFS: Send error in write = -28
followed by:
BUG: kernel NULL pointer dereference, address: 0000000000000008
with:
RIP: 0010:iter_file_splice_write+0x3a4/0x520
do_splice+0x197/0x4e0
or:
RIP: 0010:pipe_buf_release (include/linux/pipe_fs_i.h:282)
iter_file_splice_write (fs/splice.c:755)
Also put a warning check into splice to announce if ->write_iter() returned
that it had written more than it was asked to.
Fixes: 288ace2f57 ("netfs: New writeback implementation")
Reported-by: Xiaoli Feng <fengxiaoli0714@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220445
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/915443.1755207950@warthog.procyon.org.uk
cc: Paulo Alcantara <pc@manguebit.org>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: netfs@lists.linux.dev
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
[ Dropped read_collect.c hunk ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 920e8ee2bf ]
The helper function fs_path_len() is trivial and doesn't need to change
its path argument, so make it inline and constify the argument.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 005b0a0c24 ]
Currently holes are sent as writes full of zeroes, which results in
unnecessarily using disk space at the receiving end and increasing the
stream size.
In some cases we avoid sending writes of zeroes, like during a full
send operation where we just skip writes for holes.
But for some cases we fill previous holes with writes of zeroes too, like
in this scenario:
1) We have a file with a hole in the range [2M, 3M), we snapshot the
subvolume and do a full send. The range [2M, 3M) stays as a hole at
the receiver since we skip sending write commands full of zeroes;
2) We punch a hole for the range [3M, 4M) in our file, so that now it
has a 2M hole in the range [2M, 4M), and snapshot the subvolume.
Now if we do an incremental send, we will send write commands full
of zeroes for the range [2M, 4M), removing the hole for [2M, 3M) at
the receiver.
We could improve cases such as this last one by doing additional
comparisons of file extent items (or their absence) between the parent
and send snapshots, but that's a lot of code to add plus additional CPU
and IO costs.
Since the send stream v2 already has a fallocate command and btrfs-progs
implements a callback to execute fallocate since the send stream v2
support was added to it, update the kernel to use fallocate for punching
holes for V2+ streams.
Test coverage is provided by btrfs/284 which is a version of btrfs/007
that exercises send stream v2 instead of v1, using fsstress with random
operations and fssum to verify file contents.
Link: https://github.com/kdave/btrfs-progs/issues/1001
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 374d45af64 ]
Whenever we issue a command we allocate a path and then compute it. For
the current inode this is not necessary since we have one preallocated
and computed in the send context structure, so we can use it instead
and avoid allocating and freeing a path.
For example if we have 100 extents to send (100 write commands) for a
file, we are allocating and freeing paths 100 times.
So improve on this by avoiding path allocation and freeing whenever a
command is for the current inode by using the current inode's path
stored in the send context structure.
A test was run before applying this patch and the previous one in the
series:
"btrfs: send: keep the current inode's path cached"
The test script is the following:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
mkfs.btrfs -f $DEV > /dev/null
mount $DEV $MNT
DIR="$MNT/one/two/three/four"
FILE="$DIR/foobar"
mkdir -p $DIR
# Create some empty files to get a deeper btree and therefore make
# path computations slower.
for ((i = 1; i <= 30000; i++)); do
echo -n > "$DIR/filler_$i"
done
for ((i = 0; i < 10000; i += 2)); do
offset=$(( i * 4096 ))
xfs_io -f -c "pwrite -S 0xab $offset 4K" $FILE > /dev/null
done
btrfs subvolume snapshot -r $MNT $MNT/snap
start=$(date +%s%N)
btrfs send -f /dev/null $MNT/snap
end=$(date +%s%N)
echo -e "\nsend took $(( (end - start) / 1000000 )) milliseconds"
umount $MNT
Result before applying the 2 patches: 1121 milliseconds
Result after applying the 2 patches: 815 milliseconds (-31.6%)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 005b0a0c24 ("btrfs: send: use fallocate for hole punching with send stream v2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fc746acb7a ]
Whenever we need to send a command for the current inode, like sending
writes, xattr updates, truncates, utimes, etc, we compute the inode's
path each time, which implies doing some memory allocations and traversing
the inode hierarchy to extract the name of the inode and each ancestor
directory, and that implies doing lookups in the subvolume tree amongst
other operations.
Most of the time, by far, the current inode's path doesn't change while
we are processing it (like if we need to issue 100 write commands, the
path remains the same and it's pointless to compute it 100 times).
To avoid this keep the current inode's path cached in the send context
and invalidate it or update it whenever it's needed (after unlinks or
renames).
A performance test, and its results, is mentioned in the next patch in
the series (subject: "btrfs: send: avoid path allocation for the current
inode when issuing commands").
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 005b0a0c24 ("btrfs: send: use fallocate for hole punching with send stream v2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ec666c84de ]
Extract the logic to rename the current inode at process_recorded_refs()
into a helper function and use it, therefore removing duplicated logic
and making it easier for an upcoming patch by avoiding yet more duplicated
logic.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 005b0a0c24 ("btrfs: send: use fallocate for hole punching with send stream v2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9453fe3297 ]
We have several local variables at process_recorded_refs() that are used
as booleans, with some of them having a 'bool' type while two of them
having an 'int' type. Change this to make them all use the 'bool' type
which is more clear and to make everything more consistent.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 005b0a0c24 ("btrfs: send: use fallocate for hole punching with send stream v2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 17f6a74d0b ]
We always send xattrs for the current inode only and both callers of
send_set_xattr() pass a path for the current inode. So move the path
allocation and computation to send_set_xattr(), reducing duplicated
code. This also facilitates an upcoming patch.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 005b0a0c24 ("btrfs: send: use fallocate for hole punching with send stream v2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d2845519b0 ]
Fix up xfs_inumbers to now pass in the XFS_IBULK* flags into the flags
argument to xfs_inobt_walk, which expects the XFS_IWALK* flags.
Currently passing the wrong flags works for non-debug builds because
the only XFS_IWALK* flag has the same encoding as the corresponding
XFS_IBULK* flag, but in debug builds it can trigger an assert that no
incorrect flag is passed. Instead just extra the relevant flag.
Fixes: 5b35d922c5 ("xfs: Decouple XFS_IBULK flags from XFS_IWALK flags")
Cc: <stable@vger.kernel.org> # v5.19
Reported-by: cen zhang <zzzccc427@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 62be7afcc1 ]
btrfs_zone_finish() can fail for several reason. If it is -EAGAIN, we need
to try it again later. So, put the block group to the retry list properly.
Failing to do so will keep the removable block group intact until remount
and can causes unnecessary ENOSPC.
Fixes: 74e91b12b1 ("btrfs: zoned: zone finish unused block group")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0497dfba98 ]
Similar to mark_bg_unused() and mark_bg_to_reclaim(), we have a few
places that use bg_list with refcounting, mostly for retrying failures
to reclaim/delete unused.
These have custom logic for handling locking and refcounting the bg_list
properly, but they actually all want to do the same thing, so pull that
logic out into a helper. Unfortunately, mark_bg_unused() does still need
the NEW flag to avoid prematurely marking stuff unused (even if refcount
is fine, we don't want to mess with bg creation), so it cannot use the
new helper.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 62be7afcc1 ("btrfs: zoned: requeue to unused block group list if zone finish failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7cbce3cb4c ]
All other users of the bg_list list_head increment the refcount when
adding to a list and decrement it when deleting from the list. Just for
the sake of uniformity and to try to avoid refcounting bugs, do it for
this list as well.
This does not fix any known ref-counting bug, as the reference belongs
to a single task (trans_handle is not shared and this represents
trans_handle->new_bgs linkage) and will not lose its original refcount
while that thread is running. And BLOCK_GROUP_FLAG_NEW protects against
ref-counting errors "moving" the block group to the unused list without
taking a ref.
With that said, I still believe it is simpler to just hold the extra ref
count for this list user as well.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 62be7afcc1 ("btrfs: zoned: requeue to unused block group list if zone finish failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33e8f24b52 ]
If we find an unexpected generation for the extent buffer we are cloning
at btrfs_copy_root(), we just WARN_ON() and don't error out and abort the
transaction, meaning we allow to persist metadata with an unexpected
generation. Instead of warning only, abort the transaction and return
-EUCLEAN.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1f06c942aa ]
Only one of the callers of __add_block_group_free_space() aborts the
transaction if the call fails, while the others don't do it and it's
either never done up the call chain or much higher in the call chain.
So make sure we abort the transaction at __add_block_group_free_space()
if it fails, which brings a couple benefits:
1) If some call chain never aborts the transaction, we avoid having some
metadata inconsistency because BLOCK_GROUP_FLAG_NEEDS_FREE_SPACE is
cleared when we enter __add_block_group_free_space() and therefore
__add_block_group_free_space() is never called again to add the block
group items to the free space tree, since the function is only called
when that flag is set in a block group;
2) If the call chain already aborts the transaction, then we get a better
trace that points to the exact step from __add_block_group_free_space()
which failed, which is better for analysis.
So abort the transaction at __add_block_group_free_space() if any of its
steps fails.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b63c8c1ede ]
Transaction aborts should be done next to the place the error happens,
which was not done in add_block_group_free_space().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 1f06c942aa ("btrfs: always abort transaction on failure to add block group to free space tree")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e124966775 ]
There's a race between a task disabling quotas and another running the
rescan ioctl that can result in a use-after-free of qgroup records from
the fs_info->qgroup_tree rbtree.
This happens as follows:
1) Task A enters btrfs_ioctl_quota_rescan() -> btrfs_qgroup_rescan();
2) Task B enters btrfs_quota_disable() and calls
btrfs_qgroup_wait_for_completion(), which does nothing because at that
point fs_info->qgroup_rescan_running is false (it wasn't set yet by
task A);
3) Task B calls btrfs_free_qgroup_config() which starts freeing qgroups
from fs_info->qgroup_tree without taking the lock fs_info->qgroup_lock;
4) Task A enters qgroup_rescan_zero_tracking() which starts iterating
the fs_info->qgroup_tree tree while holding fs_info->qgroup_lock,
but task B is freeing qgroup records from that tree without holding
the lock, resulting in a use-after-free.
Fix this by taking fs_info->qgroup_lock at btrfs_free_qgroup_config().
Also at btrfs_qgroup_rescan() don't start the rescan worker if quotas
were already disabled.
Reported-by: cen zhang <zzzccc427@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAFRLqsV+cMDETFuzqdKSHk_FDm6tneea45krsHqPD6B3FetLpQ@mail.gmail.com/
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d98cf4632 upstream.
Both jbd2_log_do_checkpoint() and jbd2_journal_shrink_checkpoint_list()
periodically release j_list_lock after processing a batch of buffers to
avoid long hold times on the j_list_lock. However, since both functions
contend for j_list_lock, the combined time spent waiting and processing
can be significant.
jbd2_journal_shrink_checkpoint_list() explicitly calls cond_resched() when
need_resched() is true to avoid softlockups during prolonged operations.
But jbd2_log_do_checkpoint() only exits its loop when need_resched() is
true, relying on potentially sleeping functions like __flush_batch() or
wait_on_buffer() to trigger rescheduling. If those functions do not sleep,
the kernel may hit a softlockup.
watchdog: BUG: soft lockup - CPU#3 stuck for 156s! [kworker/u129:2:373]
CPU: 3 PID: 373 Comm: kworker/u129:2 Kdump: loaded Not tainted 6.6.0+ #10
Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.27 06/13/2017
Workqueue: writeback wb_workfn (flush-7:2)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : native_queued_spin_lock_slowpath+0x358/0x418
lr : jbd2_log_do_checkpoint+0x31c/0x438 [jbd2]
Call trace:
native_queued_spin_lock_slowpath+0x358/0x418
jbd2_log_do_checkpoint+0x31c/0x438 [jbd2]
__jbd2_log_wait_for_space+0xfc/0x2f8 [jbd2]
add_transaction_credits+0x3bc/0x418 [jbd2]
start_this_handle+0xf8/0x560 [jbd2]
jbd2__journal_start+0x118/0x228 [jbd2]
__ext4_journal_start_sb+0x110/0x188 [ext4]
ext4_do_writepages+0x3dc/0x740 [ext4]
ext4_writepages+0xa4/0x190 [ext4]
do_writepages+0x94/0x228
__writeback_single_inode+0x48/0x318
writeback_sb_inodes+0x204/0x590
__writeback_inodes_wb+0x54/0xf8
wb_writeback+0x2cc/0x3d8
wb_do_writeback+0x2e0/0x2f8
wb_workfn+0x80/0x2a8
process_one_work+0x178/0x3e8
worker_thread+0x234/0x3b8
kthread+0xf0/0x108
ret_from_fork+0x10/0x20
So explicitly call cond_resched() in jbd2_log_do_checkpoint() to avoid
softlockup.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250812063752.912130-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77de19b686 upstream.
As Jiaming Zhang reported:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x1c1/0x2a0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x17e/0x800 mm/kasan/report.c:480
kasan_report+0x147/0x180 mm/kasan/report.c:593
data_blkaddr fs/f2fs/f2fs.h:3053 [inline]
f2fs_data_blkaddr fs/f2fs/f2fs.h:3058 [inline]
f2fs_get_dnode_of_data+0x1a09/0x1c40 fs/f2fs/node.c:855
f2fs_reserve_block+0x53/0x310 fs/f2fs/data.c:1195
prepare_write_begin fs/f2fs/data.c:3395 [inline]
f2fs_write_begin+0xf39/0x2190 fs/f2fs/data.c:3594
generic_perform_write+0x2c7/0x910 mm/filemap.c:4112
f2fs_buffered_write_iter fs/f2fs/file.c:4988 [inline]
f2fs_file_write_iter+0x1ec8/0x2410 fs/f2fs/file.c:5216
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x546/0xa90 fs/read_write.c:686
ksys_write+0x149/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf3/0x3d0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is in the corrupted image, there is a dnode has the same
node id w/ its inode, so during f2fs_get_dnode_of_data(), it tries to
access block address in dnode at offset 934, however it parses the dnode
as inode node, so that get_dnode_addr() returns 360, then it tries to
access page address from 360 + 934 * 4 = 4096 w/ 4 bytes.
To fix this issue, let's add sanity check for node id of all direct nodes
during f2fs_get_dnode_of_data().
Cc: stable@kernel.org
Reported-by: Jiaming Zhang <r772577952@gmail.com>
Closes: https://groups.google.com/g/syzkaller/c/-ZnaaOOfO3M
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74857fdc5d upstream.
The NODATASUM message was printed twice by mistake and the NODATACOW was
missing from the 'unset' part. Fix the duplication and make the output
look the same.
Fixes: eddb1a433f ("btrfs: add reconfigure callback for fs_context")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b435ab556b upstream.
After the fsconfig migration in 6.8, mount option info messages are no
longer displayed during mount operations because btrfs_emit_options() is
only called during remount, not during initial mount.
Fix this by calling btrfs_emit_options() in btrfs_fill_super() after
open_ctree() succeeds. Additionally, prevent log duplication by ensuring
btrfs_check_options() handles validation with warn-level and err-level
messages, while btrfs_emit_options() provides info-level messages.
Fixes: eddb1a433f ("btrfs: add reconfigure callback for fs_context")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit edf842abe4 upstream.
Fix a wrong log message that appears when the "nobarrier" mount option
is unset. When "nobarrier" is unset, barrier is actually enabled.
However, the log incorrectly stated "turning off barriers".
Fixes: eddb1a433f ("btrfs: add reconfigure callback for fs_context")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c4b93f4c8 upstream.
Since commit 13bb483d32 ("btrfs: zoned: activate metadata block group on
write time"), we activate a metadata block group at the write time. If the
zone capacity is small enough, we can allocate the entire region before the
first write. Then, we hit the btrfs_zoned_bg_is_full() in
btrfs_zone_activate() and the activation fails.
For a data block group, we activate it at the allocation time and we should
check the fullness condition in the caller side. Add, a WARN to check the
fullness condition.
For a metadata block group, we don't need the fullness check because we
activate it at the write time. Instead, activating it once it is written
should be invalid. Catch that with a WARN too.
Fixes: 13bb483d32 ("btrfs: zoned: activate metadata block group on write time")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5e104a91e upstream.
When the file system is frozen in preparation for taking an LVM
snapshot, the journal is checkpointed and if the orphan_file feature
is enabled, and the orphan file is empty, we clear the orphan_present
feature flag. But if there are pending inodes that need to be removed
the orphan_present feature flag can't be cleared.
The problem comes if the block device is read-only. In that case, we
can't process the orphan inode list, so it is skipped in
ext4_orphan_cleanup(). But then in ext4_mark_recovery_complete(),
this results in the ext4 error "Orphan file not empty on read-only fs"
firing and the file system mount is aborted.
Fix this by clearing the needs_recovery flag in the block device is
read-only. We do this after the call to ext4_load_and_init-journal()
since there are some error checks need to be done in case the journal
needs to be replayed and the block device is read-only, or if the
block device containing the externa journal is read-only, etc.
Cc: stable@kernel.org
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1108271
Cc: stable@vger.kernel.org
Fixes: 02f310fcf4 ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ffbdd1f11 upstream.
In some cases like small FSes with no meta_bg and where the resize
doesn't need extra gdt blocks as it can fit in the current one,
s_reserved_gdt_blocks is set as 0, which causes fsmap to emit a 0
length entry, which is incorrect.
$ mkfs.ext4 -b 65536 -O bigalloc /dev/sda 5G
$ mount /dev/sda /mnt/scratch
$ xfs_io -c "fsmap -d" /mnt/scartch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [128..255]: special 102:1 128
2: 253:48 [256..255]: special 102:2 0 <---- 0 len entry
3: 253:48 [256..383]: special 102:3 128
Fix this by adding a check for this case.
Cc: stable@kernel.org
Fixes: 0c9ec4beec ("ext4: support GETFSMAP ioctls")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/08781b796453a5770112aa96ad14c864fbf31935.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bae76c035b upstream.
With bigalloc enabled, the logic to report last extent has a bug since
we try to use cluster units instead of block units. This can cause an
issue where extra incorrect entries might be returned back to the
user. This was flagged by generic/365 with 64k bs and -O bigalloc.
** Details of issue **
The issue was noticed on 5G 64k blocksize FS with -O bigalloc which has
only 1 bg.
$ xfs_io -c "fsmap -d" /mnt/scratch
0: 253:48 [0..127]: static fs metadata 128 /* sb */
1: 253:48 [128..255]: special 102:1 128 /* gdt */
3: 253:48 [256..383]: special 102:3 128 /* block bitmap */
4: 253:48 [384..2303]: unknown 1920 /* flex bg empty space */
5: 253:48 [2304..2431]: special 102:4 128 /* inode bitmap */
6: 253:48 [2432..4351]: unknown 1920 /* flex bg empty space */
7: 253:48 [4352..6911]: inodes 2560
8: 253:48 [6912..538623]: unknown 531712
9: 253:48 [538624..10485759]: free space 9947136
The issue can be seen with:
$ xfs_io -c "fsmap -d 0 3" /mnt/scratch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [384..2047]: unknown 1664
Only the first entry was expected to be returned but we get 2. This is
because:
ext4_getfsmap_datadev()
first_cluster, last_cluster = 0
...
info->gfi_last = true;
ext4_getfsmap_datadev_helper(sb, end_ag, last_cluster + 1, 0, info);
fsb = C2B(1) = 16
fslen = 0
...
/* Merge in any relevant extents from the meta_list */
list_for_each_entry_safe(p, tmp, &info->gfi_meta_list, fmr_list) {
...
// since fsb = 16, considers all metadata which starts before 16 blockno
iter 1: error = ext4_getfsmap_helper(sb, info, p); // p = sb (0,1), nop
info->gfi_next_fsblk = 1
iter 2: error = ext4_getfsmap_helper(sb, info, p); // p = gdt (1,2), nop
info->gfi_next_fsblk = 2
iter 3: error = ext4_getfsmap_helper(sb, info, p); // p = blk bitmap (2,3), nop
info->gfi_next_fsblk = 3
iter 4: error = ext4_getfsmap_helper(sb, info, p); // p = ino bitmap (18,19)
if (rec_blk > info->gfi_next_fsblk) { // (18 > 3)
// emits an extra entry ** BUG **
}
}
Fix this by directly calling ext4_getfsmap_datadev() with a dummy
record that has fmr_physical set to (end_fsb + 1) instead of
last_cluster + 1. By using the block instead of cluster we get the
correct behavior.
Replacing ext4_getfsmap_datadev_helper() with ext4_getfsmap_helper()
is okay since the gfi_lastfree and metadata checks in
ext4_getfsmap_datadev_helper() are anyways redundant when we only want
to emit the last allocated block of the range, as we have already
taken care of emitting metadata and any last free blocks.
Cc: stable@kernel.org
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Fixes: 4a622e4d47 ("ext4: fix FS_IOC_GETFSMAP handling")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/e7472c8535c9c5ec10f425f495366864ea12c9da.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4cc4a4077 upstream.
The check for a fast symlink in the presence of only an
external xattr inode is incorrect. If a fast symlink does
not have an xattr block (i_file_acl == 0), but does have
an external xattr inode that increases inode i_blocks, then
the check for a fast symlink will incorrectly fail and
__ext4_iget()->ext4_ind_check_inode() will report the inode
is corrupt when it "validates" i_data[] on the next read:
# ln -s foo /mnt/tmp/bar
# setfattr -h -n trusted.test \
-v "$(yes | head -n 4000)" /mnt/tmp/bar
# umount /mnt/tmp
# mount /mnt/tmp
# ls -l /mnt/tmp
ls: cannot access '/mnt/tmp/bar': Structure needs cleaning
total 4
? l?????????? ? ? ? ? ? bar
# dmesg | tail -1
EXT4-fs error (device dm-8): __ext4_iget:5098:
inode #24578: block 7303014: comm ls: invalid block
(note that "block 7303014" = 0x6f6f66 = "foo" in LE order).
ext4_inode_is_fast_symlink() should check the superblock
EXT4_FEATURE_INCOMPAT_EA_INODE feature flag, not the inode
EXT4_EA_INODE_FL, since the latter is only set on the xattr
inode itself, and not on the inode that uses this xattr.
Cc: stable@vger.kernel.org
Fixes: fc82228a5e ("ext4: support fast symlinks from ext3 file systems")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Li Dongyang <dongyangli@ddn.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/59879
Lustre-bug-id: https://jira.whamcloud.com/browse/LU-19121
Link: https://patch.msgid.link/20250717063709.757077-1-adilger@dilger.ca
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0d41112f1 upstream.
Update the connection tracking logic to handle both IPv4 and IPv6
address families.
Cc: stable@vger.kernel.org
Fixes: e6bb919397 ("ksmbd: limit repeated connections from clients with the same IP")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89bb430f62 upstream.
When ksmbd_conn_releasing(opinfo->conn) returns true,the refcount was not
decremented properly, causing a refcount leak that prevents the count from
reaching zero and the memory from being released.
Cc: stable@vger.kernel.org
Signed-off-by: Ziyan Xu <ziyan@securitygossip.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 59b33fab4c ]
After commit 5c70eb5c59 ("net: better track kernel sockets lifetime"),
kernel sockets now use net_passive reference counting. However, commit
95d2b9f693 ("Revert "smb: client: fix TCP timers deadlock after rmmod"")
restored the manual socket refcount manipulation without adapting to this
new mechanism, causing a memory leak.
The issue can be reproduced by[1]:
1. Creating a network namespace
2. Mounting and Unmounting CIFS within the namespace
3. Deleting the namespace
Some memory leaks may appear after a period of time following step 3.
unreferenced object 0xffff9951419f6b00 (size 256):
comm "ip", pid 447, jiffies 4294692389 (age 14.730s)
hex dump (first 32 bytes):
1b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 80 77 c2 44 51 99 ff ff .........w.DQ...
backtrace:
__kmem_cache_alloc_node+0x30e/0x3d0
__kmalloc+0x52/0x120
net_alloc_generic+0x1d/0x30
copy_net_ns+0x86/0x200
create_new_namespaces+0x117/0x300
unshare_nsproxy_namespaces+0x60/0xa0
ksys_unshare+0x148/0x360
__x64_sys_unshare+0x12/0x20
do_syscall_64+0x59/0x110
entry_SYSCALL_64_after_hwframe+0x78/0xe2
...
unreferenced object 0xffff9951442e7500 (size 32):
comm "mount.cifs", pid 475, jiffies 4294693782 (age 13.343s)
hex dump (first 32 bytes):
40 c5 38 46 51 99 ff ff 18 01 96 42 51 99 ff ff @.8FQ......BQ...
01 00 00 00 6f 00 c5 07 6f 00 d8 07 00 00 00 00 ....o...o.......
backtrace:
__kmem_cache_alloc_node+0x30e/0x3d0
kmalloc_trace+0x2a/0x90
ref_tracker_alloc+0x8e/0x1d0
sk_alloc+0x18c/0x1c0
inet_create+0xf1/0x370
__sock_create+0xd7/0x1e0
generic_ip_connect+0x1d4/0x5a0 [cifs]
cifs_get_tcp_session+0x5d0/0x8a0 [cifs]
cifs_mount_get_session+0x47/0x1b0 [cifs]
dfs_mount_share+0xfa/0xa10 [cifs]
cifs_mount+0x68/0x2b0 [cifs]
cifs_smb3_do_mount+0x10b/0x760 [cifs]
smb3_get_tree+0x112/0x2e0 [cifs]
vfs_get_tree+0x29/0xf0
path_mount+0x2d4/0xa00
__se_sys_mount+0x165/0x1d0
Root cause:
When creating kernel sockets, sk_alloc() calls net_passive_inc() for
sockets with sk_net_refcnt=0. The CIFS code manually converts kernel
sockets to user sockets by setting sk_net_refcnt=1, but doesn't call
the corresponding net_passive_dec(). This creates an imbalance in the
net_passive counter, which prevents the network namespace from being
destroyed when its last user reference is dropped. As a result, the
entire namespace and all its associated resources remain allocated.
Timeline of patches leading to this issue:
- commit ef7134c7fc ("smb: client: Fix use-after-free of network
namespace.") in v6.12 fixed the original netns UAF by manually
managing socket refcounts
- commit e9f2517a3e ("smb: client: fix TCP timers deadlock after
rmmod") in v6.13 attempted to use kernel sockets but introduced
TCP timer issues
- commit 5c70eb5c59 ("net: better track kernel sockets lifetime")
in v6.14-rc5 introduced the net_passive mechanism with
sk_net_refcnt_upgrade() for proper socket conversion
- commit 95d2b9f693 ("Revert "smb: client: fix TCP timers deadlock
after rmmod"") in v6.15-rc3 reverted to manual refcount management
without adapting to the new net_passive changes
Fix this by using sk_net_refcnt_upgrade() which properly handles the
net_passive counter when converting kernel sockets to user sockets.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220343 [1]
Fixes: 95d2b9f693 ("Revert "smb: client: fix TCP timers deadlock after rmmod"")
Cc: stable@vger.kernel.org
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4289b494ac upstream.
[BUG]
There is an internal report that balance triggered transaction abort,
with the following call trace:
item 85 key (594509824 169 0) itemoff 12599 itemsize 33
extent refs 1 gen 197740 flags 2
ref#0: tree block backref root 7
item 86 key (594558976 169 0) itemoff 12566 itemsize 33
extent refs 1 gen 197522 flags 2
ref#0: tree block backref root 7
...
BTRFS error (device loop0): extent item not found for insert, bytenr 594526208 num_bytes 16384 parent 449921024 root_objectid 934 owner 1 offset 0
BTRFS error (device loop0): failed to run delayed ref for logical 594526208 num_bytes 16384 type 182 action 1 ref_mod 1: -117
------------[ cut here ]------------
BTRFS: Transaction aborted (error -117)
WARNING: CPU: 1 PID: 6963 at ../fs/btrfs/extent-tree.c:2168 btrfs_run_delayed_refs+0xfa/0x110 [btrfs]
And btrfs check doesn't report anything wrong related to the extent
tree.
[CAUSE]
The cause is a little complex, firstly the extent tree indeed doesn't
have the backref for 594526208.
The extent tree only have the following two backrefs around that bytenr
on-disk:
item 65 key (594509824 METADATA_ITEM 0) itemoff 13880 itemsize 33
refs 1 gen 197740 flags TREE_BLOCK
tree block skinny level 0
(176 0x7) tree block backref root CSUM_TREE
item 66 key (594558976 METADATA_ITEM 0) itemoff 13847 itemsize 33
refs 1 gen 197522 flags TREE_BLOCK
tree block skinny level 0
(176 0x7) tree block backref root CSUM_TREE
But the such missing backref item is not an corruption on disk, as the
offending delayed ref belongs to subvolume 934, and that subvolume is
being dropped:
item 0 key (934 ROOT_ITEM 198229) itemoff 15844 itemsize 439
generation 198229 root_dirid 256 bytenr 10741039104 byte_limit 0 bytes_used 345571328
last_snapshot 198229 flags 0x1000000000001(RDONLY) refs 0
drop_progress key (206324 EXTENT_DATA 2711650304) drop_level 2
level 2 generation_v2 198229
And that offending tree block 594526208 is inside the dropped range of
that subvolume. That explains why there is no backref item for that
bytenr and why btrfs check is not reporting anything wrong.
But this also shows another problem, as btrfs will do all the orphan
subvolume cleanup at a read-write mount.
So half-dropped subvolume should not exist after an RW mount, and
balance itself is also exclusive to subvolume cleanup, meaning we
shouldn't hit a subvolume half-dropped during relocation.
The root cause is, there is no orphan item for this subvolume.
In fact there are 5 subvolumes from around 2021 that have the same
problem.
It looks like the original report has some older kernels running, and
caused those zombie subvolumes.
Thankfully upstream commit 8d488a8c7b ("btrfs: fix subvolume/snapshot
deletion not triggered on mount") has long fixed the bug.
[ENHANCEMENT]
For repairing such old fs, btrfs-progs will be enhanced.
Considering how delayed the problem will show up (at run delayed ref
time) and at that time we have to abort transaction already, it is too
late.
Instead here we reject any half-dropped subvolume for reloc tree at the
earliest time, preventing confusion and extra time wasted on debugging
similar bugs.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b63259618 upstream.
__qgroup_excl_accounting() uses the qgroup iterator machinery to
update the account of one qgroups usage for all its parent hierarchy,
when we either add or remove a relation and have only exclusive usage.
However, there is a small bug there: we loop with an extra iteration
temporary qgroup called `cur` but never actually refer to that in the
body of the loop. As a result, we redundantly account the same usage to
the first qgroup in the list.
This can be reproduced in the following way:
mkfs.btrfs -f -O squota <dev>
mount <dev> <mnt>
btrfs subvol create <mnt>/sv
dd if=/dev/zero of=<mnt>/sv/f bs=1M count=1
sync
btrfs qgroup create 1/100 <mnt>
btrfs qgroup create 2/200 <mnt>
btrfs qgroup assign 1/100 2/200 <mnt>
btrfs qgroup assign 0/256 1/100 <mnt>
btrfs qgroup show <mnt>
and the broken result is (note the 2MiB on 1/100 and 0Mib on 2/100):
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
1/100 2.03MiB 2.03MiB 2/100<1 member qgroup>
2/100 0.00B 0.00B <0 member qgroups>
With this fix, which simply re-uses `qgroup` as the iteration variable,
we see the expected result:
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
1/100 1.02MiB 1.02MiB 2/100<1 member qgroup>
2/100 1.02MiB 1.02MiB <0 member qgroups>
The existing fstests did not exercise two layer inheritance so this bug
was missed. I intend to add that testing there, as well.
Fixes: a0bdc04b07 ("btrfs: qgroup: use qgroup_iterator in __qgroup_excl_accounting()")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a931e9b39 upstream.
We call btrfs_zone_finish_one_bg() to zone finish one block group and make
room to activate another block group. Currently, we can choose a metadata
block group as a target. But, as we reserve an active metadata block group,
we no longer want to select a metadata block group. So, skip it in the
loop.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc5799986f upstream.
Currently we only log an error message if we can't find the block group
for a log tree extent buffer when unaccounting it (while freeing a log
tree). A missing block group means something is seriously wrong and we
end up leaking space from the metadata space info. So return -ENOENT in
case we don't find the block group.
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a32e4f002 upstream.
If we log a new inode (not persisted in a past transaction) that has 0
links and extents, then log another inode with an higher inode number, we
end up with failing to replay the log tree with -EINVAL. The steps for
this are:
1) create new file A
2) write some data to file A
3) open an fd on file A
4) unlink file A
5) fsync file A using the previously open fd
6) create file B (has higher inode number than file A)
7) fsync file B
8) power fail before current transaction commits
Now when attempting to mount the fs, the log replay will fail with
-ENOENT at replay_one_extent() when attempting to replay the first
extent of file A. The failure comes when trying to open the inode for
file A in the subvolume tree, since it doesn't exist.
Before commit 5f61b96159 ("btrfs: fix inode lookup error handling
during log replay"), the returned error was -EIO instead of -ENOENT,
since we converted any errors when attempting to read an inode during
log replay to -EIO.
The reason for this is that the log replay procedure fails to ignore
the current inode when we are at the stage LOG_WALK_REPLAY_ALL, our
current inode has 0 links and last inode we processed in the previous
stage has a non 0 link count. In other words, the issue is that at
replay_one_extent() we only update wc->ignore_cur_inode if the current
replay stage is LOG_WALK_REPLAY_INODES.
Fix this by updating wc->ignore_cur_inode whenever we find an inode item
regardless of the current replay stage. This is a simple solution and easy
to backport, but later we can do other alternatives like avoid logging
extents or inode items other than the inode item for inodes with a link
count of 0.
The problem with the wc->ignore_cur_inode logic has been around since
commit f2d72f42d5 ("Btrfs: fix warning when replaying log after fsync
of a tmpfile") but it only became frequent to hit since the more recent
commit 5e85262e54 ("btrfs: fix fsync of files with no hard links not
persisting deletion"), because we stopped skipping inodes with a link
count of 0 when logging, while before the problem would only be triggered
if trying to replay a log tree created with an older kernel which has a
logged inode with 0 links.
A test case for fstests will be submitted soon.
Reported-by: Peter Jung <ptr1337@cachyos.org>
Link: https://lore.kernel.org/linux-btrfs/fce139db-4458-4788-bb97-c29acf6cb1df@cachyos.org/
Reported-by: burneddi <burneddi@protonmail.com>
Link: https://lore.kernel.org/linux-btrfs/lh4W-Lwc0Mbk-QvBhhQyZxf6VbM3E8VtIvU3fPIQgweP_Q1n7wtlUZQc33sYlCKYd-o6rryJQfhHaNAOWWRKxpAXhM8NZPojzsJPyHMf2qY=@protonmail.com/#t
Reported-by: Russell Haley <yumpusamongus@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/598ecc75-eb80-41b3-83c2-f2317fbb9864@gmail.com/
Fixes: f2d72f42d5 ("Btrfs: fix warning when replaying log after fsync of a tmpfile")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0d013495a upstream.
If we failed to insert the tree mod log operation, we are not removing the
dirty status from the allocated and dirtied extent buffer before we free
it. Removing the dirty status is needed for several reasons such as to
adjust the fs_info->dirty_metadata_bytes counter and remove the dirty
status from the respective folios. So add the missing call to
btrfs_clear_buffer_dirty().
Fixes: f61aa7ba08 ("btrfs: do not BUG_ON() on tree mod log failure at insert_new_root()")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
