[ Upstream commit f2326fd14a ]
IMA testing revealed that after an ext4 remount, file accesses triggered
full measurements even without modifications, instead of skipping as
expected when i_version is unchanged.
Debugging showed `SB_I_VERSION` was cleared in reconfigure_super() during
remount due to commit 1ff2030739 ("ext4: unconditionally enable the
i_version counter") removing the fix from commit 960e0ab63b ("ext4: fix
i_version handling on remount").
To rectify this, `SB_I_VERSION` is always set for `fc->sb_flags` in
ext4_init_fs_context(), instead of `sb->s_flags` in __ext4_fill_super(),
ensuring it persists across all mounts.
Cc: stable@kernel.org
Fixes: 1ff2030739 ("ext4: unconditionally enable the i_version counter")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250703073903.6952-2-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5e104a91e upstream.
When the file system is frozen in preparation for taking an LVM
snapshot, the journal is checkpointed and if the orphan_file feature
is enabled, and the orphan file is empty, we clear the orphan_present
feature flag. But if there are pending inodes that need to be removed
the orphan_present feature flag can't be cleared.
The problem comes if the block device is read-only. In that case, we
can't process the orphan inode list, so it is skipped in
ext4_orphan_cleanup(). But then in ext4_mark_recovery_complete(),
this results in the ext4 error "Orphan file not empty on read-only fs"
firing and the file system mount is aborted.
Fix this by clearing the needs_recovery flag in the block device is
read-only. We do this after the call to ext4_load_and_init-journal()
since there are some error checks need to be done in case the journal
needs to be replayed and the block device is read-only, or if the
block device containing the externa journal is read-only, etc.
Cc: stable@kernel.org
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1108271
Cc: stable@vger.kernel.org
Fixes: 02f310fcf4 ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ffbdd1f11 upstream.
In some cases like small FSes with no meta_bg and where the resize
doesn't need extra gdt blocks as it can fit in the current one,
s_reserved_gdt_blocks is set as 0, which causes fsmap to emit a 0
length entry, which is incorrect.
$ mkfs.ext4 -b 65536 -O bigalloc /dev/sda 5G
$ mount /dev/sda /mnt/scratch
$ xfs_io -c "fsmap -d" /mnt/scartch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [128..255]: special 102:1 128
2: 253:48 [256..255]: special 102:2 0 <---- 0 len entry
3: 253:48 [256..383]: special 102:3 128
Fix this by adding a check for this case.
Cc: stable@kernel.org
Fixes: 0c9ec4beec ("ext4: support GETFSMAP ioctls")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/08781b796453a5770112aa96ad14c864fbf31935.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bae76c035b upstream.
With bigalloc enabled, the logic to report last extent has a bug since
we try to use cluster units instead of block units. This can cause an
issue where extra incorrect entries might be returned back to the
user. This was flagged by generic/365 with 64k bs and -O bigalloc.
** Details of issue **
The issue was noticed on 5G 64k blocksize FS with -O bigalloc which has
only 1 bg.
$ xfs_io -c "fsmap -d" /mnt/scratch
0: 253:48 [0..127]: static fs metadata 128 /* sb */
1: 253:48 [128..255]: special 102:1 128 /* gdt */
3: 253:48 [256..383]: special 102:3 128 /* block bitmap */
4: 253:48 [384..2303]: unknown 1920 /* flex bg empty space */
5: 253:48 [2304..2431]: special 102:4 128 /* inode bitmap */
6: 253:48 [2432..4351]: unknown 1920 /* flex bg empty space */
7: 253:48 [4352..6911]: inodes 2560
8: 253:48 [6912..538623]: unknown 531712
9: 253:48 [538624..10485759]: free space 9947136
The issue can be seen with:
$ xfs_io -c "fsmap -d 0 3" /mnt/scratch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [384..2047]: unknown 1664
Only the first entry was expected to be returned but we get 2. This is
because:
ext4_getfsmap_datadev()
first_cluster, last_cluster = 0
...
info->gfi_last = true;
ext4_getfsmap_datadev_helper(sb, end_ag, last_cluster + 1, 0, info);
fsb = C2B(1) = 16
fslen = 0
...
/* Merge in any relevant extents from the meta_list */
list_for_each_entry_safe(p, tmp, &info->gfi_meta_list, fmr_list) {
...
// since fsb = 16, considers all metadata which starts before 16 blockno
iter 1: error = ext4_getfsmap_helper(sb, info, p); // p = sb (0,1), nop
info->gfi_next_fsblk = 1
iter 2: error = ext4_getfsmap_helper(sb, info, p); // p = gdt (1,2), nop
info->gfi_next_fsblk = 2
iter 3: error = ext4_getfsmap_helper(sb, info, p); // p = blk bitmap (2,3), nop
info->gfi_next_fsblk = 3
iter 4: error = ext4_getfsmap_helper(sb, info, p); // p = ino bitmap (18,19)
if (rec_blk > info->gfi_next_fsblk) { // (18 > 3)
// emits an extra entry ** BUG **
}
}
Fix this by directly calling ext4_getfsmap_datadev() with a dummy
record that has fmr_physical set to (end_fsb + 1) instead of
last_cluster + 1. By using the block instead of cluster we get the
correct behavior.
Replacing ext4_getfsmap_datadev_helper() with ext4_getfsmap_helper()
is okay since the gfi_lastfree and metadata checks in
ext4_getfsmap_datadev_helper() are anyways redundant when we only want
to emit the last allocated block of the range, as we have already
taken care of emitting metadata and any last free blocks.
Cc: stable@kernel.org
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Fixes: 4a622e4d47 ("ext4: fix FS_IOC_GETFSMAP handling")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/e7472c8535c9c5ec10f425f495366864ea12c9da.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4cc4a4077 upstream.
The check for a fast symlink in the presence of only an
external xattr inode is incorrect. If a fast symlink does
not have an xattr block (i_file_acl == 0), but does have
an external xattr inode that increases inode i_blocks, then
the check for a fast symlink will incorrectly fail and
__ext4_iget()->ext4_ind_check_inode() will report the inode
is corrupt when it "validates" i_data[] on the next read:
# ln -s foo /mnt/tmp/bar
# setfattr -h -n trusted.test \
-v "$(yes | head -n 4000)" /mnt/tmp/bar
# umount /mnt/tmp
# mount /mnt/tmp
# ls -l /mnt/tmp
ls: cannot access '/mnt/tmp/bar': Structure needs cleaning
total 4
? l?????????? ? ? ? ? ? bar
# dmesg | tail -1
EXT4-fs error (device dm-8): __ext4_iget:5098:
inode #24578: block 7303014: comm ls: invalid block
(note that "block 7303014" = 0x6f6f66 = "foo" in LE order).
ext4_inode_is_fast_symlink() should check the superblock
EXT4_FEATURE_INCOMPAT_EA_INODE feature flag, not the inode
EXT4_EA_INODE_FL, since the latter is only set on the xattr
inode itself, and not on the inode that uses this xattr.
Cc: stable@vger.kernel.org
Fixes: fc82228a5e ("ext4: support fast symlinks from ext3 file systems")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Li Dongyang <dongyangli@ddn.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/59879
Lustre-bug-id: https://jira.whamcloud.com/browse/LU-19121
Link: https://patch.msgid.link/20250717063709.757077-1-adilger@dilger.ca
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d345aa1fa upstream.
The grp->bb_largest_free_order is updated regardless of whether
mb_optimize_scan is enabled. This can lead to inconsistencies between
grp->bb_largest_free_order and the actual s_mb_largest_free_orders list
index when mb_optimize_scan is repeatedly enabled and disabled via remount.
For example, if mb_optimize_scan is initially enabled, largest free
order is 3, and the group is in s_mb_largest_free_orders[3]. Then,
mb_optimize_scan is disabled via remount, block allocations occur,
updating largest free order to 2. Finally, mb_optimize_scan is re-enabled
via remount, more block allocations update largest free order to 1.
At this point, the group would be removed from s_mb_largest_free_orders[3]
under the protection of s_mb_largest_free_orders_locks[2]. This lock
mismatch can lead to list corruption.
To fix this, whenever grp->bb_largest_free_order changes, we now always
attempt to remove the group from its old order list. However, we only
insert the group into the new order list if `mb_optimize_scan` is enabled.
This approach helps prevent lock inconsistencies and ensures the data in
the order lists remains reliable.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@vger.kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-12-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c320d8e92 upstream.
Groups with no free blocks shouldn't be in any average fragment size list.
However, when all blocks in a group are allocated(i.e., bb_fragments or
bb_free is 0), we currently skip updating the average fragment size, which
means the group isn't removed from its previous s_mb_avg_fragment_size[old]
list.
This created "zombie" groups that were always skipped during traversal as
they couldn't satisfy any block allocation requests, negatively impacting
traversal efficiency.
Therefore, when a group becomes completely full, bb_avg_fragment_size_order
is now set to -1. If the old order was not -1, a removal operation is
performed; if the new order is not -1, an insertion is performed.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-11-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 099b847ccc ]
A syzbot fuzzed image triggered a BUG_ON in ext4_update_inline_data()
when an inode had the INLINE_DATA_FL flag set but was missing the
system.data extended attribute.
Since this can happen due to a maiciouly fuzzed file system, we
shouldn't BUG, but rather, report it as a corrupted file system.
Add similar replacements of BUG_ON with EXT4_ERROR_INODE() ii
ext4_create_inline_data() and ext4_inline_data_truncate().
Reported-by: syzbot+544248a761451c0df72f@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91b8ca8b26 ]
Currently we clear BH_New bit in case of error and also in the standard
ext4_write_end() handler (in block_commit_write()). However
ext4_journalled_write_end() misses this clearing and thus we are leaving
stale BH_New bits behind. Generally ext4_block_write_begin() clears
these bits before any harm can be done but in case blocksize < pagesize
and we hit some error when processing a page with these stale bits,
we'll try to zero buffers with these stale BH_New bits and jbd2 will
complain (as buffers were not prepared for writing in this transaction).
Fix the problem by clearing BH_New bits in ext4_journalled_write_end()
and WARN if ext4_block_write_begin() sees stale BH_New bits.
Reported-by: Baolin Liu <liubaolin12138@163.com>
Reported-by: Zhi Long <longzhi@sangfor.com.cn>
Fixes: 3910b513fc ("ext4: persist the new uptodate buffers in ext4_journalled_zero_new_buffers")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250709084831.23876-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 129245cfbd ]
The error out label of file_modified() should be out_inode_lock in
ext4_fallocate().
Fixes: 2890e5e0f4 ("ext4: move out common parts into ext4_fallocate()")
Reported-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250319023557.2785018-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 29ec9bed23 ]
For the extents based inodes, the maxbytes should be sb->s_maxbytes
instead of sbi->s_bitmap_maxbytes. Additionally, for the calculation of
max_end, the -sb->s_blocksize operation is necessary only for
indirect-block based inodes. Correct the maxbytes and max_end value to
correct the behavior of punch hole.
Fixes: 2da376228a ("ext4: limit length to bitmap_maxbytes - blocksize in punch_hole")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250506012009.3896990-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2890e5e0f4 ]
Currently, all zeroing ranges, punch holes, collapse ranges, and insert
ranges first wait for all existing direct I/O workers to complete, and
then they acquire the mapping's invalidate lock before performing the
actual work. These common components are nearly identical, so we can
simplify the code by factoring them out into the ext4_fallocate().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-11-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 29ec9bed23 ("ext4: fix incorrect punch max_end")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ea3f17efd3 ]
Currently, all five sub-functions of ext4_fallocate() acquire the
inode's i_rwsem at the beginning and release it before exiting. This
process can be simplified by factoring out the management of i_rwsem
into the ext4_fallocate() function.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-10-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 29ec9bed23 ("ext4: fix incorrect punch max_end")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fd2f764826 ]
Now the real job of normal fallocate are open coded in ext4_fallocate(),
factor out a new helper ext4_do_fallocate() to do the real job, like
others functions (e.g. ext4_zero_range()) in ext4_fallocate() do, this
can make the code more clear, no functional changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-9-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 29ec9bed23 ("ext4: fix incorrect punch max_end")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4942550437 ]
Simplify ext4_insert_range() and align its code style with that of
ext4_collapse_range(). Refactor it by: a) renaming variables, b)
removing redundant input parameter checks and moving the remaining
checks under i_rwsem in preparation for future refactoring, and c)
renaming the three stale error tags.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-8-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 29ec9bed23 ("ext4: fix incorrect punch max_end")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 162e3c5ad1 ]
Simplify ext4_collapse_range() and align its code style with that of
ext4_zero_range() and ext4_punch_hole(). Refactor it by: a) renaming
variables, b) removing redundant input parameter checks and moving
the remaining checks under i_rwsem in preparation for future
refactoring, and c) renaming the three stale error tags.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 29ec9bed23 ("ext4: fix incorrect punch max_end")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 53471e0bed ]
The current implementation of ext4_zero_range() contains complex
position calculations and stale error tags. To improve the code's
clarity and maintainability, it is essential to clean up the code and
improve its readability, this can be achieved by: a) simplifying and
renaming variables, making the style the same as ext4_punch_hole(); b)
eliminating unnecessary position calculations, writing back all data in
data=journal mode, and drop page cache from the original offset to the
end, rather than using aligned blocks; c) renaming the stale out_mutex
tags.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-6-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 29ec9bed23 ("ext4: fix incorrect punch max_end")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 982bf37da0 ]
The current implementation of ext4_punch_hole() contains complex
position calculations and stale error tags. To improve the code's
clarity and maintainability, it is essential to clean up the code and
improve its readability, this can be achieved by: a) simplifying and
renaming variables; b) eliminating unnecessary position calculations;
c) writing back all data in data=journal mode, and drop page cache from
the original offset to the end, rather than using aligned blocks,
d) renaming the stale error tags.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 29ec9bed23 ("ext4: fix incorrect punch max_end")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 73ae756ecd ]
After commit 'ad5cd4f4ee ("ext4: fix fallocate to use file_modified to
update permissions consistently"), we can update mtime and ctime
appropriately through file_modified() when doing zero range, collapse
rage, insert range and punch hole, hence there is no need to explicit
update times in those paths, just drop them.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 29ec9bed23 ("ext4: fix incorrect punch max_end")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e26268ff1d upstream.
fstest generic/388 occasionally reproduces a crash that looks as
follows:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
Call Trace:
<TASK>
ext4_block_zero_page_range+0x30c/0x380 [ext4]
ext4_truncate+0x436/0x440 [ext4]
ext4_process_orphan+0x5d/0x110 [ext4]
ext4_orphan_cleanup+0x124/0x4f0 [ext4]
ext4_fill_super+0x262d/0x3110 [ext4]
get_tree_bdev_flags+0x132/0x1d0
vfs_get_tree+0x26/0xd0
vfs_cmd_create+0x59/0xe0
__do_sys_fsconfig+0x4ed/0x6b0
do_syscall_64+0x82/0x170
...
This occurs when processing a symlink inode from the orphan list. The
partial block zeroing code in the truncate path calls
ext4_dirty_journalled_data() -> folio_mark_dirty(). The latter calls
mapping->a_ops->dirty_folio(), but symlink inodes are not assigned an
a_ops vector in ext4, hence the crash.
To avoid this problem, update the ext4_dirty_journalled_data() helper to
only mark the folio dirty on regular files (for which a_ops is
assigned). This also matches the journaling logic in the ext4_symlink()
creation path, where ext4_handle_dirty_metadata() is called directly.
Fixes: d84c9ebdac ("ext4: Mark pages with journalled data dirty")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://patch.msgid.link/20250516173800.175577-1-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a77a028a3 upstream.
The inode i_size cannot be larger than maxbytes, check it while loading
inode from the disk.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250506012009.3896990-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbe27f06fa upstream.
There are several locations that get the correct maxbytes value based on
the inode's block type. It would be beneficial to extract a common
helper function to make the code more clear.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250506012009.3896990-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32a93f5bc9 upstream.
Luis and David are reporting that after running generic/750 test for 90+
hours on 2k ext4 filesystem, they are able to trigger a warning in
jbd2_journal_dirty_metadata() complaining that there are not enough
credits in the running transaction started in ext4_do_writepages().
Indeed the code in ext4_do_writepages() is racy and the extent tree can
change between the time we compute credits necessary for extent tree
computation and the time we actually modify the extent tree. Thus it may
happen that the number of credits actually needed is higher. Modify
ext4_ext_index_trans_blocks() to count with the worst case of maximum
tree depth. This can reduce the possible number of writers that can
operate in the system in parallel (because the credit estimates now won't
fit in one transaction) but for reasonably sized journals this shouldn't
really be an issue. So just go with a safe and simple fix.
Link: https://lore.kernel.org/all/20250415013641.f2ppw6wov4kn4wq2@offworld
Reported-by: Davidlohr Bueso <dave@stgolabs.net>
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: kdevops@lists.linux.dev
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250429175535.23125-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 17207d0bb2 ]
When zeroing a range of folios on the filesystem which block size is
less than the page size, the file's mapped blocks within one page will
be marked as unwritten, we should remove writable userspace mappings to
ensure that ext4_page_mkwrite() can be called during subsequent write
access to these partial folios. Otherwise, data written by subsequent
mmap writes may not be saved to disk.
$mkfs.ext4 -b 1024 /dev/vdb
$mount /dev/vdb /mnt
$xfs_io -t -f -c "pwrite -S 0x58 0 4096" -c "mmap -rw 0 4096" \
-c "mwrite -S 0x5a 2048 2048" -c "fzero 2048 2048" \
-c "mwrite -S 0x59 2048 2048" -c "close" /mnt/foo
$od -Ax -t x1z /mnt/foo
000000 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58
*
000800 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59
*
001000
$umount /mnt && mount /dev/vdb /mnt
$od -Ax -t x1z /mnt/foo
000000 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58
*
000800 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
001000
Fix this by introducing ext4_truncate_page_cache_block_range() to remove
writable userspace mappings when truncating a partial folio range.
Additionally, move the journal data mode-specific handlers and
truncate_pagecache_range() into this function, allowing it to serve as a
common helper that correctly manages the page cache in preparation for
block range manipulations.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43d0105e2c ]
There is no need to write back all data before punching a hole in
non-journaled mode since it will be dropped soon after removing space.
Therefore, the call to filemap_write_and_wait_range() can be eliminated.
Besides, similar to ext4_zero_range(), we must address the case of
partially punched folios when block size < page size. It is essential to
remove writable userspace mappings to ensure that the folio can be
faulted again during subsequent mmap write access.
In journaled mode, we need to write dirty pages out before discarding
page cache in case of crash before committing the freeing data
transaction, which could expose old, stale data, even if synchronization
has been performed.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e856f93e0f ]
When dioread_nolock is turned on (the default), it will convert unwritten
extents to written at ext4_end_io_end(), even if the data writeback fails.
It leads to the possibility that stale data may be exposed when the
physical block corresponding to the file data is read-only (i.e., writes
return -EIO, but reads are normal).
Therefore a new ext4_io_end->flags EXT4_IO_END_FAILED is added, which
indicates that some bio write-back failed in the current ext4_io_end.
When this flag is set, the unwritten to written conversion is no longer
performed. Users can read the data normally until the caches are dropped,
after that, the failed extents can only be read to all 0.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122110533.4116662-3-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26343ca0df ]
data_err=abort aborts the journal on I/O errors. However, this option is
meaningless if journal is disabled, so it is rejected in nojournal mode
to reduce unnecessary checks. Also, this option is ignored upon remount.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250122110533.4116662-4-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b419c889c ]
capable() calls refer to enabled LSMs whether to permit or deny the
request. This is relevant in connection with SELinux, where a
capability check results in a policy decision and by default a denial
message on insufficient permission is issued.
It can lead to three undesired cases:
1. A denial message is generated, even in case the operation was an
unprivileged one and thus the syscall succeeded, creating noise.
2. To avoid the noise from 1. the policy writer adds a rule to ignore
those denial messages, hiding future syscalls, where the task
performs an actual privileged operation, leading to hidden limited
functionality of that task.
3. To avoid the noise from 1. the policy writer adds a rule to permit
the task the requested capability, while it does not need it,
violating the principle of least privilege.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250302160657.127253-2-cgoettsche@seltendoof.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7b0befd09 ]
A user complained that a message such as:
EXT4-fs (nvme0n1p3): re-mounted UUID ro. Quota mode: none.
implied that the file system was previously mounted read/write and was
now remounted read-only, when it could have been some other mount
state that had changed by the "mount -o remount" operation. Fix this
by only logging "ro"or "r/w" when it has changed.
https://bugzilla.kernel.org/show_bug.cgi?id=219132
Signed-off-by: Nicolas Bretz <bretznic@gmail.com>
Link: https://patch.msgid.link/20250319171011.8372-1-bretznic@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccad447a3d ]
Block validity checks need to be skipped in case they are called
for journal blocks since they are part of system's protected
zone.
Currently, this is done by checking inode->ino against
sbi->s_es->s_journal_inum, which is a direct read from the ext4 sb
buffer head. If someone modifies this underneath us then the
s_journal_inum field might get corrupted. To prevent against this,
change the check to directly compare the inode with journal->j_inode.
**Slight change in behavior**: During journal init path,
check_block_validity etc might be called for journal inode when
sbi->s_journal is not set yet. In this case we now proceed with
ext4_inode_block_valid() instead of returning early. Since systems zones
have not been set yet, it is okay to proceed so we can perform basic
checks on the blocks.
Suggested-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/0c06bc9ebfcd6ccfed84a36e79147bf45ff5adc1.1743142920.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 94824ac9a8 upstream.
Syzkaller detected a use-after-free issue in ext4_insert_dentry that was
caused by out-of-bounds access due to incorrect splitting in do_split.
BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847
CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154
make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351
ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455
ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796
ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431
vfs_symlink+0x137/0x2e0 fs/namei.c:4615
do_symlinkat+0x222/0x3a0 fs/namei.c:4641
__do_sys_symlink fs/namei.c:4662 [inline]
__se_sys_symlink fs/namei.c:4660 [inline]
__x64_sys_symlink+0x7a/0x90 fs/namei.c:4660
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The following loop is located right above 'if' statement.
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
'i' in this case could go down to -1, in which case sum of active entries
wouldn't exceed half the block size, but previous behaviour would also do
split in half if sum would exceed at the very last block, which in case of
having too many long name files in a single block could lead to
out-of-bounds access and following use-after-free.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Fixes: 5872331b3d ("ext4: fix potential negative array index in do_split()")
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250404082804.2567-3-a.sadovnikov@ispras.ru
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 642335f3ea ]
A file handle that userspace provides to open_by_handle_at() can
legitimately contain an outdated inode number that has since been reused
for another purpose - that's why the file handle also contains a generation
number.
But if the inode number has been reused for an ea_inode, check_igot_inode()
will notice, __ext4_iget() will go through ext4_error_inode(), and if the
inode was newly created, it will also be marked as bad by iget_failed().
This all happens before the point where the inode generation is checked.
ext4_error_inode() is supposed to only be used on filesystem corruption; it
should not be used when userspace just got unlucky with a stale file
handle. So when this happens, let __ext4_iget() just return an error.
Fixes: b3e6bcb945 ("ext4: add EA_INODE checking to ext4_iget()")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241129-ext4-ignore-ea-fhandle-v1-1-e532c0d1cee0@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 530fea29ef ]
Protect ext4_release_dquot against freezing so that we
don't try to start a transaction when FS is frozen, leading
to warnings.
Further, avoid taking the freeze protection if a transaction
is already running so that we don't need end up in a deadlock
as described in
46e294efc3 ext4: fix deadlock with fs freezing and EA inodes
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241121123855.645335-3-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d5e206778e upstream.
Mounting a corrupted filesystem with directory which contains '.' dir
entry with rec_len == block size results in out-of-bounds read (later
on, when the corrupted directory is removed).
ext4_empty_dir() assumes every ext4 directory contains at least '.'
and '..' as directory entries in the first data block. It first loads
the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry()
and then uses its rec_len member to compute the location of '..' dir
entry (in ext4_next_entry). It assumes the '..' dir entry fits into the
same data block.
If the rec_len of '.' is precisely one block (4KB), it slips through the
sanity checks (it is considered the last directory entry in the data
block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the
memory slot allocated to the data block. The following call to
ext4_check_dir_entry() on new value of de then dereferences this pointer
which results in out-of-bounds mem access.
Fix this by extending __ext4_check_dir_entry() to check for '.' dir
entries that reach the end of data block. Make sure to ignore the phony
dir entries for checksum (by checking name_len for non-zero).
Note: This is reported by KASAN as use-after-free in case another
structure was recently freed from the slot past the bound, but it is
really an OOB read.
This issue was found by syzkaller tool.
Call Trace:
[ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710
[ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375
[ 38.595158]
[ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1
[ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 38.595304] Call Trace:
[ 38.595308] <TASK>
[ 38.595311] dump_stack_lvl+0xa7/0xd0
[ 38.595325] print_address_description.constprop.0+0x2c/0x3f0
[ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595349] print_report+0xaa/0x250
[ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595368] ? kasan_addr_to_slab+0x9/0x90
[ 38.595378] kasan_report+0xab/0xe0
[ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595400] __ext4_check_dir_entry+0x67e/0x710
[ 38.595410] ext4_empty_dir+0x465/0x990
[ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10
[ 38.595432] ext4_rmdir.part.0+0x29a/0xd10
[ 38.595441] ? __dquot_initialize+0x2a7/0xbf0
[ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10
[ 38.595464] ? __pfx___dquot_initialize+0x10/0x10
[ 38.595478] ? down_write+0xdb/0x140
[ 38.595487] ? __pfx_down_write+0x10/0x10
[ 38.595497] ext4_rmdir+0xee/0x140
[ 38.595506] vfs_rmdir+0x209/0x670
[ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190
[ 38.595529] do_rmdir+0x363/0x3c0
[ 38.595537] ? __pfx_do_rmdir+0x10/0x10
[ 38.595544] ? strncpy_from_user+0x1ff/0x2e0
[ 38.595561] __x64_sys_unlinkat+0xf0/0x130
[ 38.595570] do_syscall_64+0x5b/0x180
[ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: ac27a0ec11 ("[PATCH] ext4: initial copy of files from ext3")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: linux-ext4@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Mahmoud Adam <mngyadam@amazon.com>
Cc: stable@vger.kernel.org
Cc: security@kernel.org
Link: https://patch.msgid.link/b3ae36a6794c4a01944c7d70b403db5b@amazon.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f87d3af741 upstream.
This fixes an analogus bug that was fixed in xfs in commit
4b8d867ca6 ("xfs: don't over-report free space or inodes in
statvfs") where statfs can report misleading / incorrect information
where project quota is enabled, and the free space is less than the
remaining quota.
This commit will resolve a test failure in generic/762 which tests for
this bug.
Cc: stable@kernel.org
Fixes: 689c958cbe ("ext4: add project quota support")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 30dac24e14 ]
Most of the callers of wbc_account_cgroup_owner() are converting a folio
to page before calling the function. wbc_account_cgroup_owner() is
converting the page back to a folio to call mem_cgroup_css_from_folio().
Convert wbc_account_cgroup_owner() to take a folio instead of a page,
and convert all callers to pass a folio directly except f2fs.
Convert the page to folio for all the callers from f2fs as they were the
only callers calling wbc_account_cgroup_owner() with a page. As f2fs is
already in the process of converting to folios, these call sites might
also soon be calling wbc_account_cgroup_owner() with a folio directly in
the future.
No functional changes. Only compile tested.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20240926140121.203821-1-kernel@pankajraghav.com
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 51d20d1dac ("iomap: fix zero padding data issue in concurrent append writes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7fc0366c6 ]
Using mapped writes, it's technically possible to expose stale
post-eof data on a truncate up operation. Consider the following
example:
$ xfs_io -fc "pwrite 0 2k" -c "mmap 0 4k" -c "mwrite 2k 2k" \
-c "truncate 8k" -c "pread -v 2k 16" <file>
...
00000800: 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 XXXXXXXXXXXXXXXX
...
This shows that the post-eof data written via mwrite lands within
EOF after a truncate up. While this is deliberate of the test case,
behavior is somewhat unpredictable because writeback does post-eof
zeroing, and writeback can occur at any time in the background. For
example, an fsync inserted between the mwrite and truncate causes
the subsequent read to instead return zeroes. This basically means
that there is a race window in this situation between any subsequent
extending operation and writeback that dictates whether post-eof
data is exposed to the file or zeroed.
To prevent this problem, perform partial block zeroing as part of
the various inode size extending operations that are susceptible to
it. For truncate extension, zero around the original eof similar to
how truncate down does partial zeroing of the new eof. For extension
via writes and fallocate related operations, zero the newly exposed
range of the file to cover any partial zeroing that must occur at
the original and new eof blocks.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://patch.msgid.link/20240919160741.208162-2-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4a622e4d47 upstream.
The original implementation ext4's FS_IOC_GETFSMAP handling only
worked when the range of queried blocks included at least one free
(unallocated) block range. This is because how the metadata blocks
were emitted was as a side effect of ext4_mballoc_query_range()
calling ext4_getfsmap_datadev_helper(), and that function was only
called when a free block range was identified. As a result, this
caused generic/365 to fail.
Fix this by creating a new function ext4_getfsmap_meta_helper() which
gets called so that blocks before the first free block range in a
block group can get properly reported.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 902cc179c9 upstream.
find_group_other() and find_group_orlov() read *_lo, *_hi with
ext4_free_inodes_count without additional locking. This can cause
data-race warning, but since the lock is held for most writes and free
inodes value is generally not a problem even if it is incorrect, it is
more appropriate to use READ_ONCE()/WRITE_ONCE() than to add locking.
==================================================================
BUG: KCSAN: data-race in ext4_free_inodes_count / ext4_free_inodes_set
write to 0xffff88810404300e of 2 bytes by task 6254 on cpu 1:
ext4_free_inodes_set+0x1f/0x80 fs/ext4/super.c:405
__ext4_new_inode+0x15ca/0x2200 fs/ext4/ialloc.c:1216
ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391
vfs_symlink+0xca/0x1d0 fs/namei.c:4615
do_symlinkat+0xe3/0x340 fs/namei.c:4641
__do_sys_symlinkat fs/namei.c:4657 [inline]
__se_sys_symlinkat fs/namei.c:4654 [inline]
__x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654
x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff88810404300e of 2 bytes by task 6257 on cpu 0:
ext4_free_inodes_count+0x1c/0x80 fs/ext4/super.c:349
find_group_other fs/ext4/ialloc.c:594 [inline]
__ext4_new_inode+0x6ec/0x2200 fs/ext4/ialloc.c:1017
ext4_symlink+0x242/0x5a0 fs/ext4/namei.c:3391
vfs_symlink+0xca/0x1d0 fs/namei.c:4615
do_symlinkat+0xe3/0x340 fs/namei.c:4641
__do_sys_symlinkat fs/namei.c:4657 [inline]
__se_sys_symlinkat fs/namei.c:4654 [inline]
__x64_sys_symlinkat+0x5e/0x70 fs/namei.c:4654
x64_sys_call+0x1dda/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:267
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x54/0x120 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: stable@vger.kernel.org
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20241003125337.47283-1-aha310510@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2f3d93e210 ]
When I enabled ext4 debug for fault injection testing, I encountered the
following warning:
EXT4-fs error (device sda): ext4_read_inode_bitmap:201: comm fsstress:
Cannot read inode bitmap - block_group = 8, inode_bitmap = 1051
WARNING: CPU: 0 PID: 511 at fs/buffer.c:1181 mark_buffer_dirty+0x1b3/0x1d0
The root cause of the issue lies in the improper implementation of ext4's
buffer_head read fault injection. The actual completion of buffer_head
read and the buffer_head fault injection are not atomic, which can lead
to the uptodate flag being cleared on normally used buffer_heads in race
conditions.
[CPU0] [CPU1] [CPU2]
ext4_read_inode_bitmap
ext4_read_bh()
<bh read complete>
ext4_read_inode_bitmap
if (buffer_uptodate(bh))
return bh
jbd2_journal_commit_transaction
__jbd2_journal_refile_buffer
__jbd2_journal_unfile_buffer
__jbd2_journal_temp_unlink_buffer
ext4_simulate_fail_bh()
clear_buffer_uptodate
mark_buffer_dirty
<report warning>
WARN_ON_ONCE(!buffer_uptodate(bh))
The best approach would be to perform fault injection in the IO completion
callback function, rather than after IO completion. However, the IO
completion callback function cannot get the fault injection code in sb.
Fix it by passing the result of fault injection into the bh read function,
we simulate faults within the bh read function itself. This requires adding
an extra parameter to the bh read functions that need fault injection.
Fixes: 46f870d690 ("ext4: simulate various I/O and checksum errors when reading metadata")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Link: https://patch.msgid.link/20240906091746.510163-1-leo.lilong@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76486b1041 ]
When we remount filesystem with 'abort' mount option while changing
other mount options as well (as is LTP test doing), we can return error
from the system call after commit d3476f3dad ("ext4: don't set
SB_RDONLY after filesystem errors") because the application of mount
option changes detects shutdown filesystem and refuses to do anything.
The behavior of application of other mount options in presence of
'abort' mount option is currently rather arbitary as some mount option
changes are handled before 'abort' and some after it.
Move aborting of the filesystem to the end of remount handling so all
requested changes are properly applied before the filesystem is shutdown
to have a reasonably consistent behavior.
Fixes: d3476f3dad ("ext4: don't set SB_RDONLY after filesystem errors")
Reported-by: Jan Stancek <jstancek@redhat.com>
Link: https://lore.kernel.org/all/Zvp6L+oFnfASaoHl@t14s
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Jan Stancek <jstancek@redhat.com>
Link: https://patch.msgid.link/20241004221556.19222-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
