commit 685a755089 upstream.
These commands are necessary to avoid severely abnormal and inaccurate
temperature readings that are caused by using the default commands.
Signed-off-by: Mason Chang <mason-cw.chang@mediatek.com>
Link: https://lore.kernel.org/r/20250526102659.30225-4-mason-cw.chang@mediatek.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6203a5e6fd upstream.
Add LVTS commands and their sizes to driver data in preparation for
adding different commands.
Signed-off-by: Mason Chang <mason-cw.chang@mediatek.com>
Link: https://lore.kernel.org/r/20250526102659.30225-3-mason-cw.chang@mediatek.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5d5a72c01 upstream.
Change the LVTS commands array to static const in preparation for
adding different commands.
Signed-off-by: Mason Chang <mason-cw.chang@mediatek.com>
Link: https://lore.kernel.org/r/20250526102659.30225-2-mason-cw.chang@mediatek.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1a4aabc27e ]
According to POSIX spec, EAGAIN returned by read with O_NONBLOCK set
means the read would block. Hence, the common implementation in
nonblocking model will poll the file when the nonblocking read returns
EAGAIN. However, when the target file is thermal zone, this mechanism
will totally malfunction because thermal zone doesn't implement sysfs
notification and thus the poll will never return.
For example, the read in Golang implemnts such method and sometimes
hangs at reading some thermal zones via sysfs.
Change to return -ENODATA instead of -EAGAIN to userspace.
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://patch.msgid.link/20250620-temp-v3-1-6becc6aeb66c@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8e157ff2d ]
Certain TEMP_ALARM GEN2 PMIC peripherals need over-temperature stage 2
automatic PMIC partial shutdown. This will ensure that in the event of
reaching the hotter stage 3 over-temperature threshold, repeated faults
will be avoided during the automatic PMIC hardware full shutdown.
Modify the stage 2 shutdown control logic to ensure that stage 2
shutdown is enabled on all affected PMICs. Read the digital major
and minor revision registers to identify these PMICs.
Signed-off-by: David Collins <david.collins@oss.qualcomm.com>
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250710224555.3047790-2-anjelique.melendez@oss.qualcomm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3159c96ac2 upstream.
When debugfs is disabled, the function has no reference any more:
drivers/thermal/mediatek/lvts_thermal.c:266:13: error: 'lvts_debugfs_exit' defined but not used [-Werror=unused-function]
266 | static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { }
| ^~~~~~~~~~~~~~~~~
Fixes: ef280c17a840 ("thermal/drivers/mediatek/lvts: Fix debugfs unregister on failure")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250505052502.1812867-1-arnd@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b49825661a ]
When running the probe function for this driver, the function
lvts_debugfs_init() gets called in lvts_domain_init() which, in
turn, gets called in lvts_probe() before registering threaded
interrupt handlers.
Even though it's unlikely, the last call may fail and, if it does,
there's nothing removing the already created debugfs folder and
files.
In order to fix that, instead of calling the lvts debugfs cleanup
function upon failure, register a devm action that will take care
of calling that upon failure or driver removal.
Since devm was used, also delete the call to lvts_debugfs_exit()
in the lvts_remove() callback, as now that's done automatically.
Fixes: f5f633b182 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250402083852.20624-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cf948c8e27 upstream.
The tj_max value obtained from the Intel TCC library are in Celsius,
whereas the thermal subsystem operates in milli-Celsius.
This discrepancy leads to incorrect trip temperature calculations.
Fix bogus trip temperature by converting tj_max to milli-Celsius Unit.
Fixes: 8ef0ca4a17 ("Merge back other thermal control material for 6.3.")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reported-by: zhang ning <zhangn1985@outlook.com>
Closes: https://lore.kernel.org/all/TY2PR01MB3786EF0FE24353026293F5ACCD97A@TY2PR01MB3786.jpnprd01.prod.outlook.com/
Tested-by: zhang ning <zhangn1985@outlook.com>
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
Link: https://patch.msgid.link/20250519070901.1031233-1-rui.zhang@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 229f3feb4b ]
Enable power-down of TMU (Thermal Management Unit) for TMU version 2 during
system suspend to save power. Save approximately 4.3mW on VDD_ANA_1P8 on
i.MX93 platforms.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241209164859.3758906-2-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2738fb3ec6 ]
Interrupts are enabled per sensor in lvts_update_irq_mask() as needed,
there's no point in enabling all of them during initialization. Change
the MONINT register initial value so all sensor interrupts start
disabled.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-4-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c612cbcdf6 upstream.
The Stage 3 thermal threshold is currently configured during
the controller initialization to 105 Celsius. From the kernel
perspective, this configuration is harmful because:
* The stage 3 interrupt that gets triggered when the threshold is
crossed is not handled in any way by the IRQ handler, it just gets
cleared. Besides, the temperature used for stage 3 comes from the
sensors, and the critical thermal trip points described in the
Devicetree will already cause a shutdown when crossed (at a lower
temperature, of 100 Celsius, for all SoCs currently using this
driver).
* The only effect of crossing the stage 3 threshold that has been
observed is that it causes the machine to no longer be able to enter
suspend. Even if that was a result of a momentary glitch in the
temperature reading of a sensor (as has been observed on the
MT8192-based Chromebooks).
For those reasons, disable the Stage 3 thermal threshold configuration.
Cc: stable@vger.kernel.org
Reported-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Closes: https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/
Fixes: f5f633b182 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-2-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65594b3745 upstream.
When configured in filtered mode, the LVTS thermal controller will
monitor the temperature from the sensors and trigger an interrupt once a
thermal threshold is crossed.
Currently this is true even during suspend and resume. The problem with
that is that when enabling the internal clock of the LVTS controller in
lvts_ctrl_set_enable() during resume, the temperature reading can glitch
and appear much higher than the real one, resulting in a spurious
interrupt getting generated.
Disable the temperature monitoring and give some time for the signals to
stabilize during suspend in order to prevent such spurious interrupts.
Cc: stable@vger.kernel.org
Reported-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Closes: https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/
Fixes: 8137bb9060 ("thermal/drivers/mediatek/lvts_thermal: Add suspend and resume")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-1-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee022e5cae upstream.
The mapping table for the rk3328 is missing the entry for -25C which is
found in the TRM section 9.5.2 "Temperature-to-code mapping".
NOTE: the kernel uses the tsadc_q_sel=1'b1 mode which is defined as:
4096-<code in table>. Whereas the table in the TRM gives the code
"3774" for -25C, the kernel uses 4096-3774=322.
[Dragan Simic] : "After going through the RK3308 and RK3328 TRMs, as
well as through the downstream kernel code, it seems we may have
some troubles at our hands. Let me explain, please.
To sum it up, part 1 of the RK3308 TRM v1.1 says on page 538 that
the equation for the output when tsadc_q_sel equals 1 is (4096 -
tsadc_q), while part 1 of the RK3328 TRM v1.2 says that the output
equation is (1024 - tsadc_q) in that case.
The downstream kernel code, however, treats the RK3308 and RK3328
tables and their values as being the same. It even mentions 1024 as
the "offset" value in a comment block for the rk_tsadcv3_control()
function, just like the upstream code does, which is obviously wrong
"offset" value when correlated with the table on page 544 of part 1
of the RK3308 TRM v1.1.
With all this in mind, it's obvious that more work is needed to make
it clear where's the actual mistake (it could be that the TRM is
wrong), which I'll volunteer for as part of the SoC binning project.
In the meantime, this patch looks fine as-is to me, by offering
what's a clear improvement to the current state of the upstream
code"
Link: https://opensource.rock-chips.com/images/9/97/Rockchip_RK3328TRM_V1.1-Part1-20170321.pdf
Cc: stable@vger.kernel.org
Fixes: eda519d5f7 ("thermal: rockchip: Support the RK3328 SOC in thermal driver")
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250207175048.35959-1-twoerner@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2542a3f70e ]
Not all devices have an ACPI companion fwnode, so adev might be NULL.
This is similar to the commit cd2fd6eab4
("platform/x86: int3472: Check for adev == NULL").
Add a check for adev not being set and return -ENODEV in that case to
avoid a possible NULL pointer deref in int3402_thermal_probe().
Note, under the same directory, int3400_thermal_probe() has such a
check.
Fixes: 77e337c6e2 ("Thermal: introduce INT3402 thermal driver")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250313043611.1212116-1-chenyuan0y@gmail.com
[ rjw: Subject edit, added Fixes: ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ac1f43c03f upstream.
Commit 0dc23567c2 ("thermal: core: Move lists of thermal instances
to trip descriptors") overlooked the case in which the Power Allocator
governor attempts to bind to a tripless thermal zone and params->trip_max
is NULL in check_power_actors().
No power actors can be found in that case, so check_power_actors() needs
to be made return 0 then to restore its previous behavior.
Fixes: 0dc23567c2 ("thermal: core: Move lists of thermal instances to trip descriptors")
Closes: https://lore.kernel.org/linux-pm/Z0NeGF4ryCe_b5rr@sashalap/
Reported-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2761105.mvXUDI8C0e@rjwysocki.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0cde378a10 ]
params->total_weight is not initialized during bind and not updated when
the bound cdev changes. The cooling device weight will not be used due
to the uninitialized total_weight, until an update via sysfs is
triggered.
The bound cdevs are updated during thermal zone registration, where each
cooling device will be bound to the thermal zone one by one, but
power_allocator_bind() can be called without an additional cdev update
when manually changing the policy of a thermal zone via sysfs.
Add a new function to handle weight update logic, including updating
total_weight, and call it when bind, weight changes, and cdev updates to
ensure total_weight is always correct.
Fixes: a3cd6db4cc ("thermal: gov_power_allocator: Support new update callback of weights")
Signed-off-by: Yu-Che Cheng <giver@chromium.org>
Link: https://patch.msgid.link/20250222-fix-power-allocator-weight-v2-1-a94de86b685a@chromium.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dc23567c2 ]
In almost all places where a thermal zone's list of thermal instances
is walked, there is a check to match a specific trip point and it is
walked in vain whenever there are no cooling devices associated with
the given trip.
To address this, store the lists of thermal instances in trip point
descriptors instead of storing them in thermal zones and adjust all
code using those lists accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5522726.Sb9uPGUboI@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Stable-dep-of: 0cde378a10 ("thermal: gov_power_allocator: Update total_weight on bind and cdev updates")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 423de5b5bc ]
Since thermal_of_should_bind() terminates the loop after processing
the first child found in cooling-maps, it will never match more than
one cdev to a given trip point which is incorrect, as there may be
cooling-maps associating one trip point with multiple cooling devices.
Address this by letting the loop continue until either all
children have been processed or a matching one has been found.
To avoid adding conditionals or goto statements, put the loop in
question into a separate function and make that function return
right away after finding a matching cooling-maps entry.
Fixes: 94c6110b0b ("thermal/of: Use the .should_bind() thermal zone callback")
Link: https://lore.kernel.org/linux-pm/20250219-fix-thermal-of-v1-1-de36e7a590c4@chromium.org/
Reported-by: Yu-Che Cheng <giver@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Yu-Che Cheng <giver@chromium.org>
Tested-by: Yu-Che Cheng <giver@chromium.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2788228.mvXUDI8C0e@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69f3aa6ad9 ]
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241010-b4-cleanup-h-of-node-put-thermal-v4-1-bfbe29ad81f4@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 423de5b5bc ("thermal/of: Fix cdev lookup in thermal_of_should_bind()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ecaa75771 ]
divvy_up_power() should use weighted_req_power instead of req_power to
calculate granted_power. Otherwise, granted_power may be unexpected as
the denominator total_req_power is a weighted sum.
This is a mistake made during the previous refactor.
Replace req_power with weighted_req_power in divvy_up_power()
calculation.
Fixes: 912e97c67c ("thermal: gov_power_allocator: Move memory allocation out of throttle()")
Signed-off-by: Yu-Che Cheng <giver@chromium.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20250219-fix-power-allocator-calc-v1-1-48b860291919@chromium.org
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9164e0912a ]
of_thermal_zone_find() calls of_parse_phandle_with_args(), but does not
release the OF node reference obtained by it.
Add a of_node_put() call when the call is successful.
Fixes: 3fd6d6e2b4 ("thermal/of: Rework the thermal device tree initialization")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241224031809.950461-1-joe@pf.is.s.u-tokyo.ac.jp
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2ffb6c3a4 ]
Add support for tsens v1.4 block what can be found in
MSM8937 and MSM8917.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20241113-msm8917-v6-5-c348fb599fef@mainlining.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7082503622 upstream.
When the current_uuid attribute is set to the active policy UUID,
reading back the same attribute is returning "INVALID" instead of
the active policy UUID on some platforms before Ice Lake.
In platforms before Ice Lake, firmware provides a list of supported
thermal policies. In this case, user space can select any of the
supported thermal policies via a write to attribute "current_uuid".
In commit c7ff297639 ("thermal: int340x: Update OS policy capability
handshake")', the OS policy handshake was updated to support Ice Lake
and later platforms and it treated priv->current_uuid_index=0 as
invalid. However, priv->current_uuid_index=0 is for the active policy,
only priv->current_uuid_index=-1 is invalid.
Fix this issue by updating the priv->current_uuid_index check.
Fixes: c7ff297639 ("thermal: int340x: Update OS policy capability handshake")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.18+ <stable@vger.kernel.org> # 5.18+
Link: https://patch.msgid.link/20241114200213.422303-1-srinivas.pandruvada@linux.intel.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0104dcdaad ]
Variables annotated with __free() need to be initialized if the function
can return before they get updated for the first time or the attempt to
free the memory pointed to by them upon function return may crash the
kernel.
Fix this issue in some places in the thermal testing code.
Fixes: f6a034f2df ("thermal: Introduce a debugfs-based testing facility")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12576267.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c426fd09c ]
Use DEFINE_FREE() to define a __free function for dropping thermal
zone template reference counters and use it along with __free() to
simplify code in some places.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4628747.LvFx2qVVIh@rjwysocki.net
[ rjw: Add variable initialization to address compiler warning ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 0104dcdaad ("thermal: testing: Initialize some variables annoteded with _free()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdf771ab47 ]
If the registration of a thermal zone takes place at the time when
system suspend is started, thermal_pm_notify() can run before the new
thermal zone is added to thermal_tz_list and its "suspended" flag will
not be set. Consequently, if __thermal_zone_device_update() is called
for that thermal zone, it will not return early as expected which may
cause some destructive interference with the system suspend or resume
flow to occur.
To avoid that, make thermal_zone_init_complete() introduced previously
set the "suspended" flag for new thermal zones if it runs during system
suspend or resume.
Fixes: 4e814173a8 ("thermal: core: Fix thermal zone suspend-resume synchronization")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8490245.NyiUUSuA9g@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7837fa8115 ]
After thermal_zone_device_register_with_trips() has called
device_register() and it has registered the new thermal zone device
with the driver core, user space may access its sysfs attributes and,
among other things, it may enable the thermal zone before it is ready.
To address this, introduce a new thermal zone state flag for
initialization and set it before calling device_register() in
thermal_zone_device_register_with_trips(). This causes
__thermal_zone_device_update() to return early until the new flag
is cleared.
To clear it when the thermal zone is ready, introduce a new
function called thermal_zone_init_complete() that will also invoke
__thermal_zone_device_update() after clearing that flag (both under the
thernal zone lock) and make thermal_zone_device_register_with_trips()
call the new function instead of checking need_update and calling
thermal_zone_device_update() when it is set.
After this change, if user space enables the thermal zone prematurely,
__thermal_zone_device_update() will return early for it until
thermal_zone_init_complete() is called. In turn, if the thermal zone
is not enabled by user space before thermal_zone_init_complete() is
called, the __thermal_zone_device_update() call in it will return early
because the thermal zone has not been enabled yet, but that function
will be invoked again by thermal_zone_device_set_mode() when the thermal
zone is enabled and it will not return early this time.
The checking of need_update is not necessary any more because the
__thermal_zone_device_update() calls potentially triggered by cooling
device binding take place before calling thermal_zone_init_complete(),
so they all will return early, which means that
thermal_zone_init_complete() must call __thermal_zone_device_update()
in case the thermal zone is enabled prematurely by user space.
Fixes: 203d3d4aa4 ("the generic thermal sysfs driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/9360231.CDJkKcVGEf@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26c9ab8090 ]
Instead of using two separate fields in struct thermal_zone_device for
representing flags related to thermal zone suspend, represent them
explicitly as bits in one u8 "state" field.
Subsequently, that field will be used for addressing race conditions
related to thermal zone initialization and exit.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/7733910.EvYhyI6sBW@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Stable-dep-of: 7837fa8115 ("thermal: core: Mark thermal zones as initializing to start with")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ddca58857 ]
Move the code run for each thermal zone by the thermal PM notify
handler to separate functions.
This will help to make some subsequent changes look somewhat more
straightforward, among other things.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2299090.iZASKD2KPV@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Stable-dep-of: 7837fa8115 ("thermal: core: Mark thermal zones as initializing to start with")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 662f920f7e ]
Since user space can start interacting with a new thermal zone as soon
as device_register() called by thermal_zone_device_register_with_trips()
returns, it is better to initialize the thermal zone before calling
device_register() on it.
Fixes: d0df264fbd ("thermal/core: Remove pointless thermal_zone_device_reset() function")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3336146.44csPzL39Z@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Although the current device tree binding of thermal zones require the
trips subnode, the binding in kernel v5.15 does not require it, and many
device trees shipped with the kernel, for example,
allwinner/sun50i-a64.dtsi and mediatek/mt8183-kukui.dtsi in ARM64, still
comply to the old binding and contain no trips subnode.
Allow the code to successfully register thermal zones w/o trips subnode
for DT binding compatibility now.
Furtherly, the inconsistency between DTs and bindings should be resolved
by either adding empty trips subnode or dropping the trips subnode
requirement.
Fixes: d0c75fa2c1 ("thermal/of: Initialize trip points separately")
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
[wenst@chromium.org: Reworked logic and kernel log messages]
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20241018073139.1268995-1-wenst@chromium.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
- Fix the TPMI_RAPL_REG_DOMAIN_INFO register offset in the TPMI part of
the Intel RAPL power capping driver, make it ignore minor hardware
version mismatches (which only indicate exposing additional features)
and update register definitions in it to enable PL4 support (Zhang
Rui).
- Add Arrow Lake-U to the list of processors supporting PL4 in the MSR
part of the Intel RAPL power capping driver (Sumeet Pawnikar).
- Remove excess pci_disable_device() calls from the processor part of
the int340x thermal driver to address a warning triggered during
module unload and remove unused CPU hotplug code related to RAPL
support from it (Zhang Rui).
-----BEGIN PGP SIGNATURE-----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=e9eE
-----END PGP SIGNATURE-----
Merge tag 'pm-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address two issues in the TPMI module of the Intel RAPL power
capping driver and one issue in the processor part of the Intel
int340x thermal driver, update a CPU ID list and register definitions
needed for RAPL PL4 support and remove some unused code.
Specifics:
- Fix the TPMI_RAPL_REG_DOMAIN_INFO register offset in the TPMI part
of the Intel RAPL power capping driver, make it ignore minor
hardware version mismatches (which only indicate exposing
additional features) and update register definitions in it to
enable PL4 support (Zhang Rui)
- Add Arrow Lake-U to the list of processors supporting PL4 in the
MSR part of the Intel RAPL power capping driver (Sumeet Pawnikar)
- Remove excess pci_disable_device() calls from the processor part of
the int340x thermal driver to address a warning triggered during
module unload and remove unused CPU hotplug code related to RAPL
support from it (Zhang Rui)"
* tag 'pm-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: processor: Add MMIO RAPL PL4 support
thermal: intel: int340x: processor: Remove MMIO RAPL CPU hotplug support
powercap: intel_rapl_msr: Add PL4 support for Arrowlake-U
powercap: intel_rapl_tpmi: Ignore minor version change
thermal: intel: int340x: processor: Fix warning during module unload
powercap: intel_rapl_tpmi: Fix bogus register reading
Address possible use-after-free scenarios during the processing of
thermal netlink commands and during thermal zone removal (Rafael
Wysocki).
-----BEGIN PGP SIGNATURE-----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=IVMx
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Address possible use-after-free scenarios during the processing of
thermal netlink commands and during thermal zone removal (Rafael
Wysocki)"
* tag 'thermal-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Free tzp copy along with the thermal zone
thermal: core: Reference count the zone in thermal_zone_get_by_id()
Similar to the MSR RAPL interface, MMIO RAPL supports PL4 too, so add
MMIO RAPL PL4d support to the processor_thermal driver.
As a result, the powercap sysfs for MMIO RAPL will show a new "peak
power" constraint.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240930081801.28502-7-rui.zhang@intel.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CPU0/package0 is always online and the MMIO RAPL driver runs on single
package systems only, so there is no need to handle CPU hotplug in it.
Always register a RAPL package device for package 0 and remove the
unnecessary CPU hotplug support.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240930081801.28502-6-rui.zhang@intel.com
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The object pointed to by tz->tzp may still be accessed after being
freed in thermal_zone_device_unregister(), so move the freeing of it
to the point after the removal completion has been completed at which
it cannot be accessed any more.
Fixes: 3d439b1a2a ("thermal/core: Alloc-copy-free the thermal zone parameters structure")
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/4623516.LvFx2qVVIh@rjwysocki.net
There are places in the thermal netlink code where nothing prevents
the thermal zone object from going away while being accessed after it
has been returned by thermal_zone_get_by_id().
To address this, make thermal_zone_get_by_id() get a reference on the
thermal zone device object to be returned with the help of get_device(),
under thermal_list_lock, and adjust all of its callers to this change
with the help of the cleanup.h infrastructure.
Fixes: 1ce50e7d40 ("thermal: core: genetlink support for events/cmd/sampling")
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/6112242.lOV4Wx5bFT@rjwysocki.net
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() in the ST
driver and add a Kconfig dependency on THERMAL_OF subsystem for the
STi driver (Raphael Gallais-Pou)
- Simplify with dev_err_probe() the error code path in the probe
functions for the brcmstb driver (Yan Zhen)
- Remove trailing space after \n newline in the Renesas driver (Colin
Ian King)
- Add DT binding compatible string for the SA8255p with the tsens
driver (Nikunj Kela)
- Use the devm_clk_get_enabled() helpers to simplify the init routine
in the sprd driver (Huan Yang)
- Remove __maybe_unused notations for the functions by using the new
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros on the IMx and
Qoriq drivers (Fabio Estevam)
- Remove unused declarations in the header file as the functions were
removed in a previous change on the ti-soc-thermal driver (Zhang
Zekun)
- Simplify with dev_err_probe() the error code path in the probe
functions for the imx_sc_thermal driver (Alexander Stein)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmba5PkACgkQqDIjiipP
6E+8JQgAhaU8DhKMKHDG8sGPC6LSFIrssIZoGJ4T+POEEyHNRFP90f1c+tyO20st
ScWi6jomj6EySotfs5X6MJzXhIABIw54OArL9sny0xUBC0Y1V008pjq3QJrMICbn
HWz8OnEcpMh+3d/fsP82vjv59AJp3EJjmOjtg5rTEwNTI4ZkanM7zUoAykCf07Ui
w3n4IO8Bu6GlU83FtLB72ePmXqggNN0a4pejGxb/vNSB5rwHBWxyBEQRJmcdg9Ic
ZbFD2Hyr9tNxEJQzqlI6hoqPj25y4SeP61PkWM47S4zW3tXv0oicNFDXj8WJKzpo
waOg0Q6Igen7hyC2XQzKQ7VSQF07gw==
=+d7/
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into
Merge thermal drivers changes for v6.12-rc1 from Daniel Lezcano:
"- Add power domain DT bindings for new Amlogic SoCs (Georges Stark)
- Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() in the ST
driver and add a Kconfig dependency on THERMAL_OF subsystem for the
STi driver (Raphael Gallais-Pou)
- Simplify with dev_err_probe() the error code path in the probe
functions for the brcmstb driver (Yan Zhen)
- Remove trailing space after \n newline in the Renesas driver (Colin
Ian King)
- Add DT binding compatible string for the SA8255p with the tsens
driver (Nikunj Kela)
- Use the devm_clk_get_enabled() helpers to simplify the init routine
in the sprd driver (Huan Yang)
- Remove __maybe_unused notations for the functions by using the new
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros on the IMx and
Qoriq drivers (Fabio Estevam)
- Remove unused declarations in the header file as the functions were
removed in a previous change on the ti-soc-thermal driver (Zhang
Zekun)
- Simplify with dev_err_probe() the error code path in the probe
functions for the imx_sc_thermal driver (Alexander Stein)"
* tag 'thermal-v6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/imx_sc_thermal: Use dev_err_probe
thermal/drivers/ti-soc-thermal: Remove unused declarations
thermal/drivers/imx: Remove __maybe_unused notations
thermal/drivers/qoriq: Remove __maybe_unused notations
thermal/drivers/sprd: Use devm_clk_get_enabled() helpers
dt-bindings: thermal: tsens: document support on SA8255p
thermal/drivers/renesas: Remove trailing space after \n newline
thermal/drivers/brcmstb_thermal: Simplify with dev_err_probe()
thermal/drivers/sti: Depend on THERMAL_OF subsystem
thermal/drivers/st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
dt-bindings: thermal: amlogic,thermal: add optional power-domains
Merge thermal core fixes and cleanups for 6.12:
- Refuse to accept trip point temperature or hysteresis that would lead
to an invalid threshold value when setting them via sysfs (Rafael
Wysocki).
- Adjust states of all uninitialized instances in the .manage()
callback of the Bang-bang thermal governor (Rafael Wysocki).
- Drop a couple of redundant checks along with the code depending on
them from the thermal core (Rafael Wysocki).
- Rearrange the thermal core to avoid redundant checks and simplify
control flow in a couple of code paths (Rafael Wysocki).
* thermal-core:
thermal: core: Drop thermal_zone_device_is_enabled()
thermal: core: Check passive delay in monitor_thermal_zone()
thermal: core: Drop dead code from monitor_thermal_zone()
thermal: core: Drop redundant lockdep_assert_held()
thermal: gov_bang_bang: Adjust states of all uninitialized instances
thermal: sysfs: Add sanity checks for trip temperature and hysteresis
There are only two callers of thermal_zone_device_is_enabled()
and one of them call is under the zone lock and the other one uses
lockdep_assert_held() on that lock. Thus the lockdep_assert_held()
in thermal_zone_device_is_enabled() is redundant and it could be
dropped, but then the function would merely become a wrapper around
a simple tz->mode check that is more convenient to do directly.
Accordingly, drop thermal_zone_device_is_enabled() altogether and update
its callers to check tz->mode directly as appropriate.
While at it, combine the tz->mode and tz->suspended checks in
__thermal_zone_device_update() because they are of a similar category
and if any of them evaluates to "true", the outcome is the same.
No intentinal functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/9353673.CDJkKcVGEf@rjwysocki.net
The only case in which thermal_zone_device_set_polling() is called
with its second argument equal to zero is when passive cooling is
under way and passive_delay_jiffies is 0, which only happens when
the given thermal zone is not polled at all.
If monitor_thermal_zone() is modified to check passive_delay_jiffies
directly, the check of the thermal_zone_device_set_polling() second
argument against 0 can be dropped and a passive_delay check can be
dropped from thermal_zone_device_register_with_trips(), so change the
code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2004353.PYKUYFuaPT@rjwysocki.net
Since monitor_thermal_zone() is only called when the given thermal zone
has been enabled, as per the thermal_zone_device_is_enabled() check in
__thermal_zone_device_update(), the tz->mode check in it always
evaluates to "false" and the thermal_zone_device_set_polling()
invocation depending on it is dead code, so drop it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10547425.nUPlyArG6x@rjwysocki.net
Along the lines of commit 24aad192c6 ("thermal: core: Drop
redundant checks from thermal_bind_cdev_to_trip()") notice that
thermal_unbind_cdev_from_trip() is only called by
thermal_zone_cdev_unbind() under the thermal zone lock, so it
need not use lockdep_assert_held() for that lock.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3341369.44csPzL39Z@rjwysocki.net
If a cooling device is registered after a thermal zone it should be
bound to and the trip point it should be bound to has already been
crossed by the zone temperature on the way up, the cooling device's
state may need to be adjusted, but the Bang-bang governor will not
do that because its .manage() callback only looks at thermal instances
for trip points whose thresholds are below or at the zone temperature.
Address this by updating bang_bang_manage() to look at all of the
uninitialized thermal instances and setting their target states in
accordance with the position of the zone temperature with respect to
the threshold of the given trip point.
Fixes: 5f64b4a1ab ("thermal: gov_bang_bang: Add .manage() callback")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/6103874.lOV4Wx5bFT@rjwysocki.net
Add sanity checks for new trip temperature and hysteresis values to
trip_point_temp_store() and trip_point_hyst_store() to prevent trip
point threshold from falling below THERMAL_TEMP_INVALID.
However, still allow user space to pass THERMAL_TEMP_INVALID as the
new trip temperature value to invalidate the trip if necessary.
Also allow the hysteresis to be updated when the temperature is invalid
to allow user space to avoid having to adjust hysteresis after a valid
temperature has been set, but in that case just change the value and do
nothing else.
Fixes: be0a3600aa ("thermal: sysfs: Rework the handling of trip point updates")
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/12528772.O9o76ZdvQC@rjwysocki.net
