243 commits

Author	SHA1	Message	Date
Stephen Boyd	24d7b074da	clk: Allow kunit tests to run without OF_OVERLAY enabled ... [ Upstream commit 94e6fdd028 ] Some configurations want to enable CONFIG_KUNIT without enabling CONFIG_OF_OVERLAY. The kunit overlay code already skips if CONFIG_OF_OVERLAY isn't enabled, so these selects here aren't really doing anything besides making it easier to run the tests without them skipping. Remove the select and move the config setting to the drivers/clk/.kunitconfig file so that the clk tests can be run with or without CONFIG_OF_OVERLAY set to test either behavior. Fixes: 5776526beb ("clk: Add KUnit tests for clk fixed rate basic type") Fixes: 274aff8711 ("clk: Add KUnit tests for clks registered with struct clk_parent_data") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20241016212738.897691-1-sboyd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>	2024-12-05 14:02:05 +01:00
Linus Torvalds	075dbe9f6e	soc: convert ep93xx to devicetree ... This concludes a long journey towards replacing the old board files with devictree description on the Cirrus Logic EP93xx platform. Nikita Shubin has been working on this for a long time, for details see the last post on https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/ -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmb1croACgkQYKtH/8kJ UicY0g//XXEXcBgE2CLfKzGimN3gREIElEqFCpd7v32XWGIQNFdS7StiGqNx1MeU UYdILm97ldgpx+NnHd3Cb9HbLQ1CTIIvAZ2ngFLDeeZO+wgzBVxWTrdUUp57ZIBn 5Fq0hNaR1bfqSr+J+ZbgizH5N96EvLr3OPz/eJetY7egVBUID/0OpwssPJxW1Ns0 f+W+yIc7BomVa71xGgI+RkHrG/5DSaoFtrB+ESt7q1nNUIeMn32JqBYqE0U2iCRN ADO8I+WfAjIcO1uN5n3KM3tigZI3GKSrBdllByr8wWNbp9l5rMYfFAPEaI109iyI 7PFrB6qhAlY9LckXMNhwLyjlnWt6qrI0B+tyg+3tW6+4OwFnpPN0cIhszFPOmrhv njsDSvybp0q9V6Mn7f394H6v9sk9RHr68mpu12hO65UBP7Qe7mrdl3snnFcm0FHL jCLnvjdmCSqRlV6YFsKDHuDzZOG88sAwH0mySKd3c/CVvgaNDsaJduelPGpuXlXX P7op6D8kyKFKfmwK0kz3t+3+2ozgYq3nu4amI7rJ72MOvJKBocTwwqpAesIuegde bn3ZN30yZDTbfEFuveOAzx7rqDlZYX/tN0uspL4VBN0rdayxBng5hneV2PypTtW0 wE9ptz5qIz8AssJ7NInwpgRTDjEut4SY3m3CS2/66V08B4EznAA= =Y3Cd -----END PGP SIGNATURE----- Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC update from Arnd Bergmann: "Convert ep93xx to devicetree This concludes a long journey towards replacing the old board files with devictree description on the Cirrus Logic EP93xx platform. Nikita Shubin has been working on this for a long time, for details see the last post on https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/" * tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config net: cirrus: use u8 for addr to calm down sparse dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0 dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe() pinctrl: ep93xx: Fix raster pins typo spi: ep93xx: update kerneldoc comments for ep93xx_spi clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate() clk: ep93xx: add module license dmaengine: cirrus: remove platform code ASoC: cirrus: edb93xx: Delete driver ARM: ep93xx: soc: drop defines ARM: ep93xx: delete all boardfiles ata: pata_ep93xx: remove legacy pinctrl use pwm: ep93xx: drop legacy pinctrl ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms ARM: dts: ep93xx: Add EDB9302 DT ARM: dts: ep93xx: add ts7250 board ARM: dts: add Cirrus EP93XX SoC .dtsi ...	2024-09-26 12:00:25 -07:00
Nikita Shubin	8a6b7e2b3a	clk: ep93xx: add DT support for Cirrus EP93xx ... Rewrite EP93xx clock driver located in arch/arm/mach-ep93xx/clock.c trying to do everything the device tree way: - provide clock acces via of - drop clk_hw_register_clkdev - drop init code and use module_auxiliary_driver Co-developed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2024-09-12 14:33:10 +00:00
Stephen Boyd	274aff8711	clk: Add KUnit tests for clks registered with struct clk_parent_data ... Test that clks registered with 'struct clk_parent_data' work as intended and can find their parents. Cc: Christian Marangi <ansuelsmth@gmail.com> Cc: Brendan Higgins <brendan.higgins@linux.dev> Reviewed-by: David Gow <davidgow@google.com> Cc: Rae Moar <rmoar@google.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240718210513.3801024-9-sboyd@kernel.org	2024-07-29 15:33:13 -07:00
Stephen Boyd	5776526beb	clk: Add KUnit tests for clk fixed rate basic type ... Test that the fixed rate basic type clk works as intended. Cc: Brendan Higgins <brendan.higgins@linux.dev> Cc: David Gow <davidgow@google.com> Cc: Rae Moar <rmoar@google.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240718210513.3801024-8-sboyd@kernel.org	2024-07-29 15:33:13 -07:00
Stephen Boyd	589eb11498	Merge branches 'clk-qcom', 'clk-rockchip', 'clk-sophgo' and 'clk-thead' into clk-next ... - Add support for the AP sub-system clock controller in the T-Head TH1520 * clk-qcom: (71 commits) clk: qcom: Park shared RCGs upon registration clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks clk: qcom: common: Add interconnect clocks support interconnect: icc-clk: Add devm_icc_clk_register interconnect: icc-clk: Specify master/slave ids dt-bindings: clock: qcom: Add AHB clock for SM8150 clk: qcom: gcc-x1e80100: Set parent rate for USB3 sec and tert PHY pipe clks dt-bindings: interconnect: Add Qualcomm IPQ9574 support clk: qcom: kpss-xcc: Return of_clk_add_hw_provider to transfer the error clk: qcom: lpasscc-sc8280xp: Constify struct regmap_config clk: qcom: gcc-x1e80100: Fix halt_check for all pipe clocks clk: qcom: gcc-ipq6018: update sdcc max clock frequency clk: qcom: camcc-sm8650: Add SM8650 camera clock controller driver dt-bindings: clock: qcom: Add SM8650 camera clock controller dt-bindings: clock: qcom: Update the order of SC8280XP camcc header clk: qcom: videocc-sm8550: Add SM8650 video clock controller clk: qcom: videocc-sm8550: Add support for videocc XO clk ares dt-bindings: clock: qcom: Add SM8650 video clock controller dt-bindings: clock: qcom: Update SM8450 videocc header file name clk: qcom: gpucc-sa8775p: Update wait_val fields for GPU GDSC's ... * clk-rockchip: dt-bindings: clock: rk3188-cru-common: remove CLK_NR_CLKS clk: rockchip: rk3188: Drop CLK_NR_CLKS usage clk: rockchip: Switch to use kmemdup_array() clk: rockchip: rk3128: Add HCLK_SFC dt-bindings: clock: rk3128: Add HCLK_SFC dt-bindings: clock: rk3128: Drop CLK_NR_CLKS clk: rockchip: rk3128: Drop CLK_NR_CLKS usage clk: rockchip: rk3128: Add hclk_vio_h2p to critical clocks clk: rockchip: rk3128: Export PCLK_MIPIPHY dt-bindings: clock: rk3128: Add PCLK_MIPIPHY * clk-sophgo: clk: sophgo: Avoid -Wsometimes-uninitialized in sg2042_clk_pll_set_rate() clk/sophgo: Using BUG() instead of unreachable() in mmux_get_parent_id() clk: sophgo: Add SG2042 clock driver dt-bindings: clock: sophgo: add clkgen for SG2042 dt-bindings: clock: sophgo: add RP gate clocks for SG2042 dt-bindings: clock: sophgo: add pll clocks for SG2042 * clk-thead: clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller	2024-07-16 11:24:25 -07:00
Drew Fustini	ae81b69fd2	clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks ... Add support for the AP sub-system clock controller in the T-Head TH1520. This include CPU, DPU, GMAC and TEE PLLs. Link: https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf Co-developed-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Yangtao Li <frank.li@vivo.com> Co-developed-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs Signed-off-by: Drew Fustini <dfustini@tenstorrent.com> Link: https://lore.kernel.org/r/20240711-th1520-clk-v3-2-6ff17bb318fb@tenstorrent.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2024-07-15 12:15:01 -07:00
Audra Mitchell	a6c3da03ea	clk: disable clk gate tests for s390 ... Currently clk-gate tests for s390 fail as the tests create a pretend clk-gate and use a "fake_reg" to emulate the expected behavior of the clk_gate->reg. I added some debug statements to the driver and noticed that the reg changes after initialization to -1, which is coming from an error coming from zpci_load(). This is likely because the test is using fake iomem and the s390 architecture likely isn't designed to handle that. Turn off the clk-gate tests for s390 for now as there is no clear work around for this problem as discussed in upstream conversation [1]. [1] https://lore.kernel.org/all/301cd41e6283c12ac67fb8c0f8d5c929.sboyd@kernel.org/T/#t Signed-off-by: Audra Mitchell <audra@redhat.com> Link: https://lore.kernel.org/r/20240702125539.524489-1-audra@redhat.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2024-07-02 15:51:14 -07:00
Linus Torvalds	619b92b9c8	I'm actually surprised this time. There aren't any new Qualcomm SoC clk ... drivers. And there's zero diff in the core clk framework. Instead we have new clk drivers for STM and Sophgo, with Samsung^WGoogle in third for the diffstat because they introduced HSI0 and HSI2 clk drivers for Google's GS101 SoC (high speed interface things like PCIe, UFS, and MMC). Beyond those big diffs there's the usual updates to various clk drivers for incorrect parent descriptions or mising MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super interesting here. New Drivers: - STM32MP257 SoC clk driver - Airoha EN7581 SoC clk driver - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver - Loongson-2k0500 and Loongson-2k2000 SoC clk driver - Add HSI0 and HSI2 clock controllers for Google GS101 - Add i.MX95 BLK CTL clock driver Updates: - Allocate clk_ops dynamically for SCMI clk driver - Add support in qcom RCG and RCG2 for multiple configurations for the same frequency - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve issues - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some boards - Cleanups and fixes for Qualcomm Stromer PLLs - Reduce max CPU frequency on Qualcomm APSS IPQ5018 - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera clk drivers - Make Qualcomm MSM8998 Venus clocks functional - Cleanup downstream remnants related to DisplayPort across Qualcomm SM8450, SM6350, SM8550, and SM8650 - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL - Use a specific Qualcomm QCS404 compatible for the otherwise generic HFPLL - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused - Remove an unused field in the Qualcomm RPM clk driver - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953 global clock controller drivers - Allow choice of manual or firmware-driven control over PLLs, needed to fully implement CPU clock controllers on Exynos850 - Correct PLL clock IDs on ExynosAutov9 - Propagate certain clock rates to allow setting proper SPI clock rates on Google GS101 - Mark certain Google GS101 clocks critical - Convert old S3C64xx clock controller bindings to DT schema - Add new PLL rate and missing mux on Rockchip rk3568 - Add missing reset line on Rockchip rk3588 - Removal of an unused field in struct rockchip_mmc_clock - Amlogic s4/a1: add regmap maximum register for proper debugfs dump - Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers - Amlogic pll driver: print clock name on lock error to help debug - Amlogic vclk: finish dsi clock path support - Amlogic license: fix occurence "GPL v2" as reported by checkpatch - Add PM runtime support to i.MX8MP Audiomix - Add DT schema for i.MX95 Display Master Block Control - Convert to platform remove callback returning void for i.MX8MP Audiomix - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas R-Car V4M - Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five - Prepare power domain support for Renesas RZ/G2L family members, and add actual support on Renesas RZ/G3S SoC - Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas R-Car V4M - Add additional constraints to Allwinner A64 PLL MIPI clock - Fix autoloading sunxi-ng clocks when build as a module -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmZGs1MRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSW2Pw/+OciG7jQzlWQD09M9qTSzygVu/0+NF8ez ecvLnWzz3b05GSWqfeG3mm09RmaTtggwPcWx4ad5NBDxGfhn+rT72WWJt6EjA1ln i/eNUQIlFZmiDM7Xwx6S841hcRbPz9/RRIeXtmiDkMWjsysr6MHlTkWWVMNfGkiE 9jxM5BH6N04A4664k3a4qlcZkj2KNkOLeCyzMLtm5aIwBoL3fZ+Q3sqVTgp5imt1 rzJgpGfN1QhAnd8kV2oIPtJEs9woZtRjCtTtLrTnoGf518uq25ZJx7Mz3Dx+ubUv dtOLjjXdM+Q/ou7DM3h7HRjiZC8Mp8CprwwoxEbckBL4gBWYPyu8e6eZNBsF+3Ol 7WP3TZknDrWsUDxAcX37Euidd+hc8xtbXCQwm+QcugEee7ZXK4ElTgXwyH3FUqn2 GBI5D0+/3WyoBLqVQ7nTkMV0ps5dHrpBj6J1u/7ZfvC23/E7/5CzIxULXt1hTOcI F1cqS78HLAc8BK3gw/63e5TtTMA4cItJD7InBB0jemfeoy03nuWzFbRUqtAStkHd BKxmGSV3XXMdGtiN5SFy3tk7NlKeFMiVBiTzD++Vx9IL3mCdArtULu93OfUIOzXW B/ekJKi9OHkJx3mBrbio6k4rugQDZovzWN9U2pDJtGCIaAXgYgwKuP8S9UwKLIcx R6QarNE5Rsc= =YoVJ -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "I'm actually surprised this time. There aren't any new Qualcomm SoC clk drivers. And there's zero diff in the core clk framework. Instead we have new clk drivers for STM and Sophgo, with Samsung^WGoogle in third for the diffstat because they introduced HSI0 and HSI2 clk drivers for Google's GS101 SoC (high speed interface things like PCIe, UFS, and MMC). Beyond those big diffs there's the usual updates to various clk drivers for incorrect parent descriptions or mising MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super interesting here. New Drivers: - STM32MP257 SoC clk driver - Airoha EN7581 SoC clk driver - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver - Loongson-2k0500 and Loongson-2k2000 SoC clk driver - Add HSI0 and HSI2 clock controllers for Google GS101 - Add i.MX95 BLK CTL clock driver Updates: - Allocate clk_ops dynamically for SCMI clk driver - Add support in qcom RCG and RCG2 for multiple configurations for the same frequency - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve issues - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some boards - Cleanups and fixes for Qualcomm Stromer PLLs - Reduce max CPU frequency on Qualcomm APSS IPQ5018 - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera clk drivers - Make Qualcomm MSM8998 Venus clocks functional - Cleanup downstream remnants related to DisplayPort across Qualcomm SM8450, SM6350, SM8550, and SM8650 - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL - Use a specific Qualcomm QCS404 compatible for the otherwise generic HFPLL - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused - Remove an unused field in the Qualcomm RPM clk driver - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953 global clock controller drivers - Allow choice of manual or firmware-driven control over PLLs, needed to fully implement CPU clock controllers on Exynos850 - Correct PLL clock IDs on ExynosAutov9 - Propagate certain clock rates to allow setting proper SPI clock rates on Google GS101 - Mark certain Google GS101 clocks critical - Convert old S3C64xx clock controller bindings to DT schema - Add new PLL rate and missing mux on Rockchip rk3568 - Add missing reset line on Rockchip rk3588 - Removal of an unused field in struct rockchip_mmc_clock - Amlogic s4/a1: add regmap maximum register for proper debugfs dump - Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers - Amlogic pll driver: print clock name on lock error to help debug - Amlogic vclk: finish dsi clock path support - Amlogic license: fix occurence "GPL v2" as reported by checkpatch - Add PM runtime support to i.MX8MP Audiomix - Add DT schema for i.MX95 Display Master Block Control - Convert to platform remove callback returning void for i.MX8MP Audiomix - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas R-Car V4M - Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five - Prepare power domain support for Renesas RZ/G2L family members, and add actual support on Renesas RZ/G3S SoC - Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas R-Car V4M - Add additional constraints to Allwinner A64 PLL MIPI clock - Fix autoloading sunxi-ng clocks when build as a module" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits) clk: samsung: Don't register clkdev lookup for the fixed rate clocks clk, reset: microchip: mpfs: fix incorrect preprocessor conditions clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018 clk: qcom: Fix SM_GPUCC_8650 dependencies clk: qcom: Fix SC_CAMCC_8280XP dependencies dt-bindings: clocks: stm32mp25: add access-controllers description clock, reset: microchip: move all mpfs reset code to the reset subsystem clk: samsung: gs101: drop unused HSI2 clock parent data clk: rockchip: rk3568: Add PLL rate for 724 MHz clk: rockchip: Remove an unused field in struct rockchip_mmc_clock dt-bindings: clock: fixed: Define a preferred node name clk: meson: s4: fix module autoloading clk: samsung: gs101: mark some apm UASC and XIU clocks critical clk: imx: imx8mp: Convert to platform remove callback returning void clk: imx: imx8mp: Switch to RUNTIME_PM_OPS() clk: bcm: rpi: Assign ->num before accessing ->hws clk: bcm: dvp: Assign ->num before accessing ->hws clk: samsung: gs101: add support for cmu_hsi2 clk: samsung: gs101: add support for cmu_hsi0 ...	2024-05-18 12:48:37 -07:00
Inochi Amaoto	80fd61ec46	clk: sophgo: Add clock support for CV1800 SoC ... Add clock definition and driver code for CV1800 SoC. Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Link: 6f4e9b8ecb/duo/datasheet/CV180X-Clock-v1.xlsx Link: 6f4e9b8ecb/duo/datasheet/CV1800B-CV1801B-Preliminary-Datasheet-full-en.pdf Link: https://lore.kernel.org/r/IA1PR20MB49534F37F802CAF117364D66BB262@IA1PR20MB4953.namprd20.prod.outlook.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2024-04-11 00:02:20 -07:00
Yangyu Chen	8e5b7234de	clk: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 ... Since SOC_FOO should be deprecated from patch [1], and cleanup for other SoCs is already in the mailing list [2,3,4], we remove the use of SOC_CANAAN and introduced SOC_CANAAN_K210 for K210-specific drivers, Thus, we replace its drivers depends on SOC_CANAAN_K210 and default select when it has the symbol SOC_CANAAN_K210. [1] https://lore.kernel.org/linux-riscv/20221121221414.109965-1-conor@kernel.org/ [2] https://lore.kernel.org/linux-riscv/20240305-praying-clad-c4fbcaa7ed0a@spud/ [3] https://lore.kernel.org/linux-riscv/20240305-fled-undrilled-41dc0c46bb29@spud/ [4] https://lore.kernel.org/linux-riscv/20240305-stress-earflap-d7ddb8655a4d@spud/ Signed-off-by: Yangyu Chen <cyy@cyyself.name> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>	2024-04-05 16:42:50 +01:00
Gabriel Fernandez	3ac7ca5995	clk: stm32mp1: move stm32mp1 clock driver into stm32 directory ... Move all STM32MP clock drivers into same directory (stm32). Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20231208143700.354785-2-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2023-12-17 15:33:26 -08:00
Stephen Boyd	720e4a4a68	Merge branches 'clk-renesas', 'clk-kunit', 'clk-regmap' and 'clk-frac-divider' into clk-next ... - Make clk kunit tests work with lockdep - Fix clk gate kunit test for big-endian - Convert more than a handful of clk drivers to use regmap maple tree - Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk implementation * clk-renesas: (23 commits) clk: renesas: r9a08g045: Add clock and reset support for SDHI1 and SDHI2 clk: renesas: rzg2l: Use %x format specifier to print CLK_ON_R() clk: renesas: Add minimal boot support for RZ/G3S SoC clk: renesas: rzg2l: Add divider clock for RZ/G3S clk: renesas: rzg2l: Refactor SD mux driver clk: renesas: rzg2l: Remove CPG_SDHI_DSEL from generic header clk: renesas: rzg2l: Add struct clk_hw_data clk: renesas: rzg2l: Add support for RZ/G3S PLL clk: renesas: rzg2l: Remove critical area clk: renesas: rzg2l: Fix computation formula clk: renesas: rzg2l: Trust value returned by hardware clk: renesas: rzg2l: Lock around writes to mux register clk: renesas: rzg2l: Wait for status bit of SD mux before continuing clk: renesas: rcar-gen3: Extend SDnH divider table dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC clk: renesas: r8a7795: Constify r8a7795_*_clks clk: renesas: r9a06g032: Name anonymous structs clk: renesas: r9a06g032: Fix kerneldoc warning clk: renesas: rzg2l: Use u32 for flag and mux_flags clk: renesas: rzg2l: Use FIELD_GET() for PLL register fields ... * clk-kunit: clk: Fix clk gate kunit test on big-endian CPUs clk: Parameterize clk_leaf_mux_set_rate_parent clk: Drive clk_leaf_mux_set_rate_parent test from clk_ops * clk-regmap: clk: versaclock7: Convert to use maple tree register cache clk: versaclock5: Convert to use maple tree register cache clk: versaclock3: Convert to use maple tree register cache clk: versaclock3: Remove redundant _is_writeable() clk: si570: Convert to use maple tree register cache clk: si544: Convert to use maple tree register cache clk: si5351: Convert to use maple tree register cache clk: si5341: Convert to use maple tree register cache clk: si514: Convert to use maple tree register cache clk: cdce925: Convert to use maple tree register cache * clk-frac-divider: clk: fractional-divider: tests: Add test suite for edge cases clk: fractional-divider: Improve approximation when zero based and export	2023-10-30 14:12:20 -07:00
Andreas Kemnade	4eb15b0363	clk: twl: add clock driver for TWL6032 ... The TWL6032 has some clock outputs which are controlled like fixed-voltage regulators, in some drivers for these chips found in the wild, just the regulator api is abused for controlling them, so simply use something similar to the regulator functions. Due to a lack of hardware available for testing, leave out the TWL6030-specific part of those functions. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20230916100515.1650336-5-andreas@kemnade.info Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2023-10-19 16:40:15 -07:00
Frank Oltmanns	2790e2a33a	clk: fractional-divider: tests: Add test suite for edge cases ... In light of the recent discovery that the fractional divisor approximation does not utilize the full available range for clocks that are flagged CLK_FRAC_DIVIDER_ZERO_BASED [1], implement tests for the edge cases of this clock type. Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Link: https://lore.kernel.org/lkml/20230529133433.56215-1-frank@oltmanns.dev [1] Link: https://lore.kernel.org/r/20230617131041.18313-3-frank@oltmanns.dev [sboyd@kernel.org: Rename suite and tests slightly, drop unused includes, store parent rate to compare instead of repeating equation] Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2023-10-12 15:05:00 -07:00
Linus Torvalds	f8fd5c2483	This pull request is full of clk driver changes. In fact, there aren't any ... changes to the clk framework this time around. That's probably because everyone was on vacation (yours truly included). We did lose a couple clk drivers this time around because nobody was using those devices. That skews the diffstat a bit, but either way, nothing looks out of the ordinary here. The usual suspects are chugging along adding support for more SoCs and fixing bugs. If I had to choose, I'd say the theme for the past few months has been "polish". There's quite a few patches that migrate to devm_platform_ioremap_resource() in here. And there's more than a handful of patches that move the NR_CLKS define from the DT binding header to the driver. There's even patches that migrate drivers to use clk_parent_data and clk_hw to describe clk tree topology. It seems that the spring (summer?) cleaning bug got some folks, or the semiconductor shortage finally hit the software side. New Drivers: - StarFive JH7110 SoC clock drivers - Qualcomm IPQ5018 Global Clock Controller driver - Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK Removed Drivers: - Remove non-OF mmp clk drivers - Remove OXNAS clk driver Updates: - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Move defines for numbers of clks (NR_CLKS) from DT headers to drivers - Introduce kstrdup_and_replace() and use it - Add PLL rates for Rockchip rk3568 - Add the display clock tree for Rockchip rv1126 - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs - Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource() - Fix function name in a comment in ccu_mmc_timing.c - Parameter name correction for ccu_nkm_round_rate() - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative parent rates when determining clock rates - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi - Support finding closest (as opposed to closest but not higher) clock rate for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0 - Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to the interconnect drivers - Fix various PM runtime bugs across many Qualcomm clk drivers - Migrate Qualcomm MDM9615 is to parent_hw and parent_data - Add network related resets on Qualcomm IPQ4019 - Add a couple missing USB related clocks to Qualcomm IPQ9574 - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are corrected - Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver - Support retention for the Qualcomm SC8280XP display clock controller GDSCs. - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while sm8450 is corrected to use floor ops - Correct Qualcomm SM6350 GPU clock controller's clock supplies - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC - Change the delay in the Qualcomm reset controller to fsleep() for correctness - Extend the Qualcomm SM83550 Video clock controller to support SC8280XP - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3, M3-W, and M3-N SoCs - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five - Add the PDM IPC clock for i.MX93 - Add 519.75MHz frequency support for i.MX9 PLL - Simplify the .determine_rate() implementation for i.MX GPR mux - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource() - Add the audio mux clock to i.MX8 - Fix the SPLL2 MULT range for PLLv4 - Update the SPLL2 type in i.MX8ULP - Fix the SAI4 clock on i.MX8MP - Add silicon revision print for i.MX25 on clocks init - Drop the return value from __mx25_clocks_init() - Fix the clock pauses on no-op set_rate for i.MX8M composite clock - Drop restrictions for i.MX PLL14xx and fix its max prediv value - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow glitch free switching -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmTv2wkRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSW1LRAAuHR2HoyB4bRHmCa1bfOfYYDfSWsBWEav tWIfBl86Nl/Je50Gk2NJ9vqU5OPqRZ57TIniijHHoX5n7/kYcr8KVmlomY07hUeg CzWyothkxg4k7+rQwVAWvmlR2YAVwzHDKcwq7gkMZOnW/y26LXip99cjopu2CJLx zVwTgvWollmd4KVlicnAlx4zUjgNkWR24iA4Lcf5ir+Dr6FYNjxLI+akBA8EPxxi wLixZbScgBSgpGn6KVgoFhclCToPS0gt5m6HfQxJ/svOCU54l+jRKpzkNZGWvyu4 A8t3CRrwL2iS/mfCGk2yRlaKySoLLpjlpW1AI7fHTWbG2P6p8ZphtN7jOeeAEsbq TNpzWEjtY6B/lfRzxxINXkrtLaqmlnFY/P5np5fDrf/61gRFxLFQemyRdY/xCSJf Kwq8ja1mrSGWoDGG9XhDqTf9Yek9LRObNzlDrEmn/i/qLTcxhOIz58pzHg4iAlx5 9HDtnJ8hKg4uE1TtT12Bmasb1+WzG7GYYESNfKWZhCvbRqEUzcDOHk7xpwYa1ffx yZIgMs7Sb/exNW8LMPYmgnyj/f9eo5IdjiQvune+Zy5NrdzfyN6Sf/LSibrqCF2z X5aFHqQrR8+PifD+se+g5HPa0ezSmBIhXzYUTOC6f+nywlrJjhwDXPDYI6Lcd//p r4mpOmJS+G4= =h2Jz -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk subsystem updates from Stephen Boyd: "This pull request is full of clk driver changes. In fact, there aren't any changes to the clk framework this time around. That's probably because everyone was on vacation (yours truly included). We did lose a couple clk drivers this time around because nobody was using those devices. That skews the diffstat a bit, but either way, nothing looks out of the ordinary here. The usual suspects are chugging along adding support for more SoCs and fixing bugs. If I had to choose, I'd say the theme for the past few months has been "polish". There's quite a few patches that migrate to devm_platform_ioremap_resource() in here. And there's more than a handful of patches that move the NR_CLKS define from the DT binding header to the driver. There's even patches that migrate drivers to use clk_parent_data and clk_hw to describe clk tree topology. It seems that the spring (summer?) cleaning bug got some folks, or the semiconductor shortage finally hit the software side. New Drivers: - StarFive JH7110 SoC clock drivers - Qualcomm IPQ5018 Global Clock Controller driver - Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK Removed Drivers: - Remove non-OF mmp clk drivers - Remove OXNAS clk driver Updates: - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Move defines for numbers of clks (NR_CLKS) from DT headers to drivers - Introduce kstrdup_and_replace() and use it - Add PLL rates for Rockchip rk3568 - Add the display clock tree for Rockchip rv1126 - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs - Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource() - Fix function name in a comment in ccu_mmc_timing.c - Parameter name correction for ccu_nkm_round_rate() - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative parent rates when determining clock rates - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi - Support finding closest (as opposed to closest but not higher) clock rate for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0 - Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to the interconnect drivers - Fix various PM runtime bugs across many Qualcomm clk drivers - Migrate Qualcomm MDM9615 is to parent_hw and parent_data - Add network related resets on Qualcomm IPQ4019 - Add a couple missing USB related clocks to Qualcomm IPQ9574 - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are corrected - Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver - Support retention for the Qualcomm SC8280XP display clock controller GDSCs. - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while sm8450 is corrected to use floor ops - Correct Qualcomm SM6350 GPU clock controller's clock supplies - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC - Change the delay in the Qualcomm reset controller to fsleep() for correctness - Extend the Qualcomm SM83550 Video clock controller to support SC8280XP - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3, M3-W, and M3-N SoCs - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five - Add the PDM IPC clock for i.MX93 - Add 519.75MHz frequency support for i.MX9 PLL - Simplify the .determine_rate() implementation for i.MX GPR mux - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource() - Add the audio mux clock to i.MX8 - Fix the SPLL2 MULT range for PLLv4 - Update the SPLL2 type in i.MX8ULP - Fix the SAI4 clock on i.MX8MP - Add silicon revision print for i.MX25 on clocks init - Drop the return value from __mx25_clocks_init() - Fix the clock pauses on no-op set_rate for i.MX8M composite clock - Drop restrictions for i.MX PLL14xx and fix its max prediv value - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow glitch free switching" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits) clk: qcom: Fix SM_GPUCC_8450 dependencies clk: lmk04832: Support using PLL1_LD as SPI readback pin clk: lmk04832: Don't disable vco clock on probe fail clk: lmk04832: Set missing parent_names for output clocks clk: mvebu: Convert to devm_platform_ioremap_resource() clk: nuvoton: Convert to devm_platform_ioremap_resource() clk: socfpga: agilex: Convert to devm_platform_ioremap_resource() clk: ti: Use devm_platform_get_and_ioremap_resource() clk: mediatek: Convert to devm_platform_ioremap_resource() clk: hsdk-pll: Convert to devm_platform_ioremap_resource() clk: gemini: Convert to devm_platform_ioremap_resource() clk: fsl-sai: Convert to devm_platform_ioremap_resource() clk: bm1880: Convert to devm_platform_ioremap_resource() clk: axm5516: Convert to devm_platform_ioremap_resource() clk: actions: Convert to devm_platform_ioremap_resource() clk: cdce925: Remove redundant of_match_ptr() clk: pxa910: Move number of clocks to driver source clk: pxa1928: Move number of clocks to driver source clk: pxa168: Move number of clocks to driver source clk: mmp2: Move number of clocks to driver source ...	2023-08-30 19:53:39 -07:00
Stephen Boyd	032bcf783e	Merge branches 'clk-versa', 'clk-strdup', 'clk-amlogic', 'clk-allwinner' and 'clk-rockchip' into clk-next ... - Add Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK - Introduce kstrdup_and_replace() and use it * clk-versa: clk: vc7: Use i2c_get_match_data() instead of device_get_match_data() clk: vc5: Use i2c_get_match_data() instead of device_get_match_data() clk: versaclock3: Switch to use i2c_driver's probe callback clk: Add support for versa3 clock driver dt-bindings: clock: Add Renesas versa3 clock generator bindings * clk-strdup: clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace() clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace() driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace() lib/string_helpers: Add kstrdup_and_replace() helper * clk-amlogic: (22 commits) dt-bindings: soc: amlogic: document System Control registers dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema clk: meson: axg-audio: move bindings include to main driver clk: meson: meson8b: move bindings include to main driver clk: meson: a1: move bindings include to main driver clk: meson: eeclk: move bindings include to main driver clk: meson: aoclk: move bindings include to main driver dt-bindings: clk: axg-audio-clkc: expose all clock ids dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids dt-bindings: clk: meson8b-clkc: expose all clock ids dt-bindings: clk: g12a-aoclkc: expose all clock ids dt-bindings: clk: g12a-clks: expose all clock ids dt-bindings: clk: axg-clkc: expose all clock ids dt-bindings: clk: gxbb-clkc: expose all clock ids clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS ... * clk-allwinner: clk: sunxi-ng: nkm: Prefer current parent rate clk: sunxi-ng: a64: select closest rate for pll-video0 clk: sunxi-ng: div: Support finding closest rate clk: sunxi-ng: mux: Support finding closest rate clk: sunxi-ng: nkm: Support finding closest rate clk: sunxi-ng: nm: Support finding closest rate clk: sunxi-ng: Add helper function to find closest rate clk: sunxi-ng: Add feature to find closest rate clk: sunxi-ng: a64: allow pll-mipi to set parent's rate clk: sunxi-ng: nkm: consider alternative parent rates when determining rate clk: sunxi-ng: nkm: Use correct parameter name for parent HW clk: sunxi-ng: Modify mismatched function name clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource() * clk-rockchip: clk: rockchip: rv1126: Add PD_VO clock tree clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz clk: rockchip: rk3568: Add PLL rate for 101MHz	2023-08-30 14:38:19 -07:00
Biju Das	6e9aff555d	clk: Add support for versa3 clock driver ... Add support for Renesas versa3 clock driver(5p35023). The clock generator provides 6 output clocks. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230705171000.85786-3-biju.das.jz@bp.renesas.com [sboyd@kernel.org: Add newline to printk] Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2023-07-19 16:39:55 -07:00
Neil Armstrong	22250dca0d	clk: oxnas: remove obsolete clock driver ... Due to lack of maintenance and stall of development for a few years now, and since no new features will ever be added upstream, remove support for OX810 and OX820 clock driver. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-1-fb6ab3dea87c@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2023-07-19 14:53:38 -07:00
Baoquan He	e7dd44f4f3	clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM ... On s390 systems (aka mainframes), it has classic channel devices for networking and permanent storage that are currently even more common than PCI devices. Hence it could have a fully functional s390 kernel with CONFIG_PCI=n, then the relevant iomem mapping functions [including ioremap(), devm_ioremap(), etc.] are not available. Here let COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM so that it won't be built to cause below compiling error if PCI is unset: ------ ld: drivers/clk/clk-fixed-mmio.o: in function `fixed_mmio_clk_setup': clk-fixed-mmio.c:(.text+0x5e): undefined reference to `of_iomap' ld: clk-fixed-mmio.c:(.text+0xba): undefined reference to `iounmap' ------ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/ Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Link: https://lore.kernel.org/r/20230707135852.24292-8-bhe@redhat.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2023-07-19 14:50:21 -07:00
Linus Torvalds	a9025a5f16	ARM: New SoC support for 6.5 ... There are two new SoC families this time, and both appear fairly similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core Cortex-A35 based chips for the low-power industrial embedded market, and they mark the first 64-bit product in a widely used family of 32-bit Arm MCUs and SoCs. The way into the kernel is completely different here: The team at ST has a long history of working upstream with their STM32MP1 and other SoCs, and they produced a complete port to arm64 together with the initial announcement. Nuvoton also has multiple SoC product lines with current or previous upstream support, but those are maintained by third parties and are unrelated. The patch series from Nuvoton's Jacky Huang had to go through many revisisions to get to this point and is still missing a few drivers including the serial port for the moment. The branch contains the devicetree files as well as all the code changes, in order to have something that can be tested standalone. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmScqtkACgkQYKtH/8kJ Uifqyg//XgvZBxb/2GILYcThVgLoo1fYA9tG5M0LERY/aPiUwrCwIl5swGQXK4vK E3UBLsQURer4yEBRq7iB6RGbwa4Opjdy3yTkj6WSgEMPh6e6jGvmm+dJ7HuWeviS 8oeyo3Xar6tIF+A8xlBloHA4J6690FYB40McQzh8sWG5SE+id56S71NGnNW0kQTn wsul9BZcGVoyMYNBi/uXtOVUPy7jF3UBC3HJF9UOT7q77bCLjVc/aHmmnZ3zmbYA 2oX3X5hVJakFba6vnz+rjNlzuAoGXJPDdsKFxBysdsksac/TxqRIQGNe75DZZVgz ESTpt1QqjmCFw32HEzi8Ne22FOpzlBqUxBMznHPenpz1/om2ezs3q7ffuPqKvMaq PANuK++JKJaBChVMzJbn84Sr1fvO4ecGJpKZTFC6t6SqHQNQFJT6rfMHx01Xw2wW LjKfEBCR6zEXN0+FaaujgJ4y/9pH1VHPynrZJG9WEwPUEZb2kJ/2RMXjNpzOWKiB pWYV1oW2TqFKYKhFm/pjkbi6Rq76UwEi8fWWoGMkmeV3KZ/0GFauQhItu6mX3s7W uGnUQyrBzWzUoashYFuNtXKHYdwuWgOmG660BXHkyxwvqV96ICGEJ+97zGIBDj81 F8zLxEjPbsEZqGGSosAyk9oYC6eh7eK2V7xx+CUYLTuKZw13zNo= =zaVi -----END PGP SIGNATURE----- Merge tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new ARM SoC support from Arnd Bergmann: "There are two new SoC families this time, and both appear fairly similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are both dual-core Cortex-A35 based chips for the low-power industrial embedded market, and they mark the first 64-bit product in a widely used family of 32-bit Arm MCUs and SoCs. The way into the kernel is completely different here: The team at ST has a long history of working upstream with their STM32MP1 and other SoCs, and they produced a complete port to arm64 together with the initial announcement. Nuvoton also has multiple SoC product lines with current or previous upstream support, but those are maintained by third parties and are unrelated. The patch series from Nuvoton's Jacky Huang had to go through many revisisions to get to this point and is still missing a few drivers including the serial port for the moment. The branch contains the devicetree files as well as all the code changes, in order to have something that can be tested standalone" * tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) clk: nuvoton: Use clk_parent_data instead of string for parent clock clk: nuvoton: Update all constant hex values to lowercase clk: nuvoton: Add clk-ma35d1.h for driver extern functions remoteproc: stm32: use correct format strings on 64-bit MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE arm64: defconfig: enable ARCH_STM32 and STM32 serial driver arm64: dts: st: add stm32mp257f-ev1 board support dt-bindings: stm32: document stm32mp257f-ev1 board arm64: dts: st: introduce stm32mp25 pinctrl files arm64: dts: st: introduce stm32mp25 SoCs family arm64: introduce STM32 family on Armv8 architecture dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon pinctrl: stm32: add stm32mp257 pinctrl support dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages Documentation/process: add soc maintainer handbook reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35 reset: Add Nuvoton ma35d1 reset driver support clk: nuvoton: Add clock driver for ma35d1 clock controller arm64: dts: nuvoton: Add initial ma35d1 device tree dt-bindings: serial: Document ma35d1 uart controller ...	2023-06-29 15:11:17 -07:00
Jacky Huang	691521a367	clk: nuvoton: Add clock driver for ma35d1 clock controller ... The clock controller generates clocks for the whole chip, including system clocks and all peripheral clocks. This driver support ma35d1 clock gating, divider, and individual PLL configuration. There are 6 PLLs in ma35d1 SoC: - CA-PLL for the two Cortex-A35 CPU clock - SYS-PLL for system bus, which comes from the companion MCU and cannot be programmed by clock controller. - DDR-PLL for DDR - EPLL for GMAC and GFX, Display, and VDEC IPs. - VPLL for video output pixel clock - APLL for SDHC, I2S audio, and other IPs. CA-PLL has only one operation mode. DDR-PLL, EPLL, VPLL, and APLL are advanced PLLs which have 3 operation modes: integer mode, fraction mode, and spread specturm mode. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2023-06-05 13:18:08 +02:00
Sebastian Reichel	c20e8c5b12	mfd: rk808: Split into core and i2c ... Split rk808 into a core and an i2c part in preparation for SPI support. Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64 Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230504173618.142075-6-sebastian.reichel@collabora.com Signed-off-by: Lee Jones <lee@kernel.org>	2023-05-15 16:19:03 +01:00
Linus Torvalds	e81507acdc	Nothing looks out of the ordinary in this batch of clk driver updates. There ... are a couple patches to the core clk framework, but they're all basically cleanups or debugging aids. The driver updates and new additions are dominated in the diffstat by Qualcomm and MediaTek drivers. Qualcomm gained a handful of new drivers for various SoCs, and MediaTek gained a bunch of drivers for MT8188. The MediaTek drivers are being modernized as well, so there are updates all over that vendor's clk drivers. There's also a couple other new clk drivers in here, for example the Starfive JH7110 SoC support is added. Outside of the two major SoC vendors though, we have the usual collection of non-critical fixes and cleanups to various clk drivers. It's good to see that we're getting more cleanups and modernization patches. Maybe one day we'll be able to properly split clk providers from clk consumers. Core: - Print an informational message before disabling unused clks New Drivers: - BCM63268 timer clock and reset controller - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Clk driver support for Loongson-2 SoCs - Clock driver for Skyworks Si521xx I2C PCIe clock generators - Initial Starfive JH7110 clk/reset support - Global clock controller drivers for Qualcomm SM7150, IPQ9574, MSM8917 and IPQ5332 SoCs - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P SoCs Updates: - Shrink size of clk_fractional_divider a little - Convert various clk drivers to devm_of_clk_add_hw_provider() - Convert platform clk drivers to remove_new() - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Reimplement Loongson-1 clk driver with DT support - Migrate socfpga clk driver to of_clk_add_hw_provider() - Support for i3c clks on Aspeed ast2600 SoCs - Add clock generic devm_clk_hw_register_gate_parent_data - Add audiomix block control for i.MX8MP - Add support for determine_rate to i.MX composite-8m - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate - Provide clock name in error message for clk-gpr-mux on get parent failure - Drop duplicate imx_clk_mux_flags macro - Register the i.MX8MP Media Disp2 Pix clock as bus clock - Add Media LDB root clock to i.MX8MP - Make i.MX8MP nand_usdhc_bus clock as non-critical - Fix the rate table for i.MX fracn-gppll - Disable HW control for the fracn-gppll in order to be controlled by register write - Add support for interger PLL in fracn-gppll - Add mcore_booted module parameter to i.MX93 provider - Add NIC, A55 and ARM PLL clocks to i.MX93 - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to get more accurate clock rates - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical - Update some of the i.MX critical clocks flags to allow glitchless on-the-fly rate change. - Add I2C5 clock on Renesas R-Car V3H - Exynos850: Add CMU_G3D clock controller for the Mali GPU - Extract Exynos5433 (ARM64) clock controller power management code to common driver parts - Exynos850: make PMU_ALIVE_PCLK clock critical - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car V4H - Add video capture (VIN) clocks on Renesas R-Car V3H - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H - Support for Stromer Plus PLL on Qualcomm IPQ5332 - Add a missing reset to Qualcomm QCM2290 - Migrate Qualcomm IPQ4019 to clk_parent_data - Make USB GDSCs enter retention state when disabled on Qualcomm SM6375, MSM8996 and MSM8998 SoCs - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk - Add two EMAC GDSCs on Qualcomm SC8280XP - Use shared rcg clk ops in Qualcomm SM6115 GCC - Park Qualcomm SM8350 PCIe PIPE clks when disabled - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller - Add missing XO clocks to Qualcomm MSM8226 and MSM8974 - Convert some Qualcomm clk DT bindings to YAML - Reparenting fix for the clock supplying camera modules on Rockchip rk3399 - Mark more critical (bus-)clocks on Rockchip rk3588 -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmRMbQURHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSUvyw//Vcqg0h8s+9npz0JsW+nffAXRguy1jum6 tj10++zA+NBhKxmfhyOs/v9UK1nb2DXAhcTIjUDcTDkVy0b2pBUQoGEGMyy9TLve q4MfWx7CwKwASUG2Lr3f1n4qi/vT4PEDlvYzUO94p7c6Y6f6P4JHTCJlJR7cNb4o MyXgiXMxQGaxT0XucSR9J32VxqSbF9KQvb8q+tPV3CDMIWi96aO5ZyewY6KF8a/7 chdXKYQXaYYG4/q4lNjZuvNQ2jidWqp0NlNw7M96U7SK5ESBryk4B4d1/J+QtzxX cuBTF1eoTKYlS3kPhhsuOhbsDi2SFE6D75ps5i9Y57ezSdS9qFcUsaNzUiN6t9ng uW+MRBTz20JDKBTLk6vD75O63fVDg3KG+kkLaF0Ax1Xa99sbrgBdNkPQ0Iu2AbSh assUmbz3s9MaPWj8LpOKLmactm4GbrQ2wtCEjguuynjaFoPUuyunReNkZ1yxfUUl MjRIYpvqVvYp29xHlBjN2cgttHjqVCBg8y7Io6RQonbIvnuN7Zo2cu+vbF7w7mdR 2HtGBe/OFsnZmmsr0pIGQOU25otheIHPudEYLlXEKx03FaMzAXnnDe9f6xXWaWxk Wz0YBofejlkP9ycLjRas2BZo3T66TtAlbQH2UhrSpJZV02Jwfi+JwBaLi9dOwZ7O VL5HI5FSlG8= =bTtL -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Nothing looks out of the ordinary in this batch of clk driver updates. There are a couple patches to the core clk framework, but they're all basically cleanups or debugging aids. The driver updates and new additions are dominated in the diffstat by Qualcomm and MediaTek drivers. Qualcomm gained a handful of new drivers for various SoCs, and MediaTek gained a bunch of drivers for MT8188. The MediaTek drivers are being modernized as well, so there are updates all over that vendor's clk drivers. There's also a couple other new clk drivers in here, for example the Starfive JH7110 SoC support is added. Outside of the two major SoC vendors though, we have the usual collection of non-critical fixes and cleanups to various clk drivers. It's good to see that we're getting more cleanups and modernization patches. Maybe one day we'll be able to properly split clk providers from clk consumers. Core: - Print an informational message before disabling unused clks New Drivers: - BCM63268 timer clock and reset controller - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Clk driver support for Loongson-2 SoCs - Clock driver for Skyworks Si521xx I2C PCIe clock generators - Initial Starfive JH7110 clk/reset support - Global clock controller drivers for Qualcomm SM7150, IPQ9574, MSM8917 and IPQ5332 SoCs - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P SoCs Updates: - Shrink size of clk_fractional_divider a little - Convert various clk drivers to devm_of_clk_add_hw_provider() - Convert platform clk drivers to remove_new() - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Reimplement Loongson-1 clk driver with DT support - Migrate socfpga clk driver to of_clk_add_hw_provider() - Support for i3c clks on Aspeed ast2600 SoCs - Add clock generic devm_clk_hw_register_gate_parent_data - Add audiomix block control for i.MX8MP - Add support for determine_rate to i.MX composite-8m - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate - Provide clock name in error message for clk-gpr-mux on get parent failure - Drop duplicate imx_clk_mux_flags macro - Register the i.MX8MP Media Disp2 Pix clock as bus clock - Add Media LDB root clock to i.MX8MP - Make i.MX8MP nand_usdhc_bus clock as non-critical - Fix the rate table for i.MX fracn-gppll - Disable HW control for the fracn-gppll in order to be controlled by register write - Add support for interger PLL in fracn-gppll - Add mcore_booted module parameter to i.MX93 provider - Add NIC, A55 and ARM PLL clocks to i.MX93 - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to get more accurate clock rates - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical - Update some of the i.MX critical clocks flags to allow glitchless on-the-fly rate change. - Add I2C5 clock on Renesas R-Car V3H - Exynos850: Add CMU_G3D clock controller for the Mali GPU - Extract Exynos5433 (ARM64) clock controller power management code to common driver parts - Exynos850: make PMU_ALIVE_PCLK clock critical - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car V4H - Add video capture (VIN) clocks on Renesas R-Car V3H - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H - Support for Stromer Plus PLL on Qualcomm IPQ5332 - Add a missing reset to Qualcomm QCM2290 - Migrate Qualcomm IPQ4019 to clk_parent_data - Make USB GDSCs enter retention state when disabled on Qualcomm SM6375, MSM8996 and MSM8998 SoCs - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk - Add two EMAC GDSCs on Qualcomm SC8280XP - Use shared rcg clk ops in Qualcomm SM6115 GCC - Park Qualcomm SM8350 PCIe PIPE clks when disabled - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller - Add missing XO clocks to Qualcomm MSM8226 and MSM8974 - Convert some Qualcomm clk DT bindings to YAML - Reparenting fix for the clock supplying camera modules on Rockchip rk3399 - Mark more critical (bus-)clocks on Rockchip rk3588" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits) clk: qcom: gcc-sc8280xp: Add EMAC GDSCs clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers clk: rockchip: rk3588: make gate linked clocks critical clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk clk: qcom: add the GPUCC driver for sa8775p dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property clk: starfive: Avoid casting iomem pointers clk: microchip: fix potential UAF in auxdev release callback clk: qcom: rpm: Use managed `of_clk_add_hw_provider()` clk: mediatek: fhctl: Mark local variables static clk: sifive: make SiFive clk drivers depend on ARCH_ symbols clk: uniphier: Use managed `of_clk_add_hw_provider()` clk: si5351: Use managed `of_clk_add_hw_provider()` clk: si570: Use managed `of_clk_add_hw_provider()` clk: si514: Use managed `of_clk_add_hw_provider()` clk: lmk04832: Use managed `of_clk_add_hw_provider()` ...	2023-04-29 17:29:39 -07:00
Stephen Boyd	6f7478e3bb	Merge branches 'clk-mediatek', 'clk-sunplus', 'clk-loongson' and 'clk-socfpga' into clk-next ... - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Reimplement Loongson-1 clk driver with DT support - Clk driver support for Loongson-2 SoCs - Migrate socfpga clk driver to of_clk_add_hw_provider() * clk-mediatek: (84 commits) clk: mediatek: fhctl: Mark local variables static clk: mediatek: Use right match table, include mod_devicetable clk: mediatek: Add MT8188 adsp clock support clk: mediatek: Add MT8188 imp i2c wrapper clock support clk: mediatek: Add MT8188 wpesys clock support clk: mediatek: Add MT8188 vppsys1 clock support clk: mediatek: Add MT8188 vppsys0 clock support clk: mediatek: Add MT8188 vencsys clock support clk: mediatek: Add MT8188 vdosys1 clock support clk: mediatek: Add MT8188 vdosys0 clock support clk: mediatek: Add MT8188 vdecsys clock support clk: mediatek: Add MT8188 mfgcfg clock support clk: mediatek: Add MT8188 ipesys clock support clk: mediatek: Add MT8188 imgsys clock support clk: mediatek: Add MT8188 ccusys clock support clk: mediatek: Add MT8188 camsys clock support clk: mediatek: Add MT8188 infrastructure clock support clk: mediatek: Add MT8188 peripheral clock support clk: mediatek: Add MT8188 topckgen clock support clk: mediatek: Add MT8188 apmixedsys clock support ... * clk-sunplus: clk: Add Sunplus SP7021 clock driver * clk-loongson: clk: clk-loongson2: add clock controller driver support dt-bindings: clock: add loongson-2 boot clock index MAINTAINERS: remove obsolete file entry in MIPS/LOONGSON1 ARCHITECTURE MIPS: loongson32: Update the clock initialization clk: loongson1: Re-implement the clock driver clk: loongson1: Remove the outdated driver dt-bindings: clock: Add Loongson-1 clock * clk-socfpga: clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling	2023-04-25 11:50:08 -07:00
Yinbo Zhu	acc0ccffec	clk: clk-loongson2: add clock controller driver support ... This driver provides support for clock controller on Loongson-2 SoC, the Loongson-2 SoC uses a 100MHz clock as the PLL reference clock, there are five independent PLLs inside, each of which PLL can provide up to three sets of frequency dependent clock outputs. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Link: https://lore.kernel.org/r/20230323025229.2971-2-zhuyinbo@loongson.cn Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2023-03-27 12:15:26 -07:00
Marek Vasut	edc12763a3	clk: si521xx: Clock driver for Skyworks Si521xx I2C PCIe clock generators ... Add driver for the Skyworks Si521xx PCIe clock generators. Supported models are Si52144/Si52146/Si52147, tested model is Si52144. It should be possible to add Si5213x series as well. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20230118191521.15544-2-marex@denx.de [sboyd@kernel.org: Make clk_ops const] Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2023-03-27 10:47:42 -07:00
Qin Jian	d54c1fd4a5	clk: Add Sunplus SP7021 clock driver ... Add clock driver for Sunplus SP7021 SoC. Signed-off-by: Qin Jian <qinjian@cqplus1.com> Link: https://lore.kernel.org/r/20221219015130.42621-1-qinjian@cqplus1.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2023-03-20 14:43:25 -07:00
Randy Dunlap	0ffad67784	clk: HI655X: select REGMAP instead of depending on it ... REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: 3a49afb84c ("clk: enable hi655x common clk automatically") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Riku Voipio <riku.voipio@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-3-rdunlap@infradead.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2023-03-06 11:31:14 -08:00
Paul E. McKenney	22cb284808	drivers/clk: Remove "select SRCU" ... Now that the SRCU Kconfig option is unconditionally selected, there is no longer any point in selecting it. Therefore, remove the "select SRCU" Kconfig statements. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: <linux-clk@vger.kernel.org> Link: https://lore.kernel.org/r/20230105003813.1770367-9-paulmck@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2023-01-11 11:37:02 -08:00
Stephen Boyd	f9efefdba9	Merge branches 'clk-baikal', 'clk-broadcom', 'clk-vc5' and 'clk-versaclock' into clk-next ... - Convert Baikal-T1 CCU driver to platform driver - Split reset support out of primary Baikal-T1 CCU driver - Add some missing clks required for RPiVid Video Decoder on RaspberryPi - Mark PLLC critical on bcm2835 - Support for Renesas VersaClock7 clock generator family * clk-baikal: clk: baikal-t1: Convert to platform device driver clk: baikal-t1: Add DDR/PCIe directly controlled resets support dt-bindings: clk: baikal-t1: Add DDR/PCIe reset IDs clk: baikal-t1: Move reset-controls code into a dedicated module clk: baikal-t1: Add SATA internal ref clock buffer clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parent clk: baikal-t1: Fix invalid xGMAC PTP clock divider clk: vc5: Fix 5P49V6901 outputs disabling when enabling FOD * clk-broadcom: clk: bcm: rpi: Add support for VEC clock clk: bcm: rpi: Handle pixel clock in firmware clk: bcm: rpi: Add support HEVC clock clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration clk: bcm2835: Round UART input clock up clk: bcm2835: Make peripheral PLLC critical * clk-vc5: clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975 dt-bindings: clock: vc5: Add 5P49V6975 clk: vc5: Use regmap_{set,clear}_bits() where appropriate clk: vc5: Check IO access results * clk-versaclock: clk: Renesas versaclock7 ccf device driver dt-bindings: Renesas versaclock7 device tree bindings	2022-10-04 10:54:34 -07:00
Clément Léger	8a977bbb17	clk: allow building lan966x as a module ... Set the COMMON_CLK_LAN966X option as a tristate and switch from builtin_platform_driver() to module_platform_driver() to allow building and using this driver as a module. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Link: https://lore.kernel.org/r/20220617103306.489466-1-clement.leger@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-10-03 14:14:02 -07:00
Alex Helms	48c5e98fed	clk: Renesas versaclock7 ccf device driver ... Renesas Versaclock7 is a family of configurable clock generator ICs with fractional and integer dividers. This driver has basic support for the RC21008A device, a clock synthesizer with a crystal input and 8 outputs. The supports changing the FOD and IOD rates, and each output can be gated. Signed-off-by: Alex Helms <alexander.helms.jy@renesas.com> Link: https://lore.kernel.org/r/20220912183613.22213-3-alexander.helms.jy@renesas.com Tested-by: Saeed Nowshadi <saeed.nowshadi@amd.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-09-30 17:34:35 -07:00
Stephen Boyd	d75c26a926	Merge branches 'clk-rockchip', 'clk-ingenic', 'clk-bindings', 'clk-samsung' and 'clk-stm' into clk-next ... - Mark some clks critical on Ingenic X1000 - Add STM32MP13 RCC driver (Reset Clock Controller) * clk-rockchip: dt-bindings: clock: convert rockchip,rk3368-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3228-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3036-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3308-cru.txt to YAML dt-bindings: clock: convert rockchip,px30-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3188-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3288-cru.txt to YAML dt-bindings: clock: convert rockchip,rv1108-cru.txt to YAML dt-binding: clock: Add missing rk3568 cru bindings clk: rockchip: Mark hclk_vo as critical on rk3568 dt-bindings: clock: fix rk3399 cru clock issues dt-bindings: clock: use generic node name for pmucru example in rockchip,rk3399-cru.yaml dt-bindings: clock: replace a maintainer for rockchip,rk3399-cru.yaml dt-bindings: clock: fix some conversion style issues for rockchip,rk3399-cru.yaml * clk-ingenic: clk: ingenic-tcu: Fix missing TCU clock for X1000 SoCs mips: ingenic: Do not manually reference the CPU clock clk: ingenic: Mark critical clocks in Ingenic SoCs clk: ingenic: Allow specifying common clock flags * clk-bindings: dt-bindings: clock: Replace common binding with link to schema * clk-samsung: dt-bindings: clock: exynosautov9: correct count of NR_CLK clk: samsung: exynosautov9: add cmu_peric1 clock support clk: samsung: exynosautov9: add cmu_peric0 clock support clk: samsung: exynosautov9: add cmu_fsys2 clock support clk: samsung: exynosautov9: add cmu_busmc clock support clk: samsung: exynosautov9: add cmu_peris clock support clk: samsung: exynosautov9: add cmu_core clock support clk: samsung: add top clock support for Exynos Auto v9 SoC dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings dt-bindings: clock: add clock binding definitions for Exynos Auto v9 * clk-stm: clk: stm32mp13: add safe mux management clk: stm32mp13: add multi mux function clk: stm32mp13: add all STM32MP13 kernel clocks clk: stm32mp13: add all STM32MP13 peripheral clocks clk: stm32mp13: manage secured clocks clk: stm32mp13: add composite clock clk: stm32mp13: add stm32 divider clock clk: stm32mp13: add stm32_gate management clk: stm32mp13: add stm32_mux clock management clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller) dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC	2022-05-25 00:27:09 -07:00
Gabriel Fernandez	637cee5ffc	clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller) ... This driver manages Reset and Clock of STM32MP13 soc. It uses a clk-stm32-core module to manage stm32 gate, mux and divider for STM32MP13 and for new future soc. All gates, muxes, dividers are identify by an index and information are stored in array (register address, shift, with, flags...) This is useful when we have two clocks with the same gate or when one mux manages two output clocks. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-3-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-05-20 21:07:48 -07:00
Felix Fietkau	1e62731791	clk: en7523: Add clock driver for Airoha EN7523 SoC ... This driver only registers fixed rate clocks, since the clocks are fully initialized by the boot loader and should not be changed later, according to Airoha. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220314084409.84394-3-nbd@nbd.name Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-04-22 19:16:50 -07:00
Linus Torvalds	9512433987	There's one large change in the core clk framework here. We change how ... clk_set_rate_range() works so that the frequency is re-evaulated each time the rate is changed. Previously we wouldn't let clk providers see a rate that was different if it was still within the range, which could be bad for power if the clk could run slower when a range expands. Now the clk provider can decide to do something differently when the constraints change. This broke Nvidia's clk driver so we had to wait for the fix for that to bake a little more in -next. The rate range patch series also introduced a kunit suite for the clk framework that we're going to extend in the next release. It already made it easy to find corner cases in the rate range patches so I'm excited to see it cover more clk code and increase our confidence in core framework patches in the future. I also added a kunit test for the basic clk gate code and that work will continue to cover more basic clk types: muxes, dividers, etc. Beyond the core code we have the usual set of clk driver updates and additions. Qualcomm again dominates the diffstat here with lots more SoCs being supported and i.MX follows afer that with a similar number of SoCs gaining clk drivers. Beyond those large additions there's drivers being modernized to use clk_parent_data so we can move away from global string names for all the clks in an SoC. Finally there's lots of little fixes all over the clk drivers for typos, warnings, and missing clks that aren't critical and get batched up waiting for the next merge window to open. Nothing super big stands out in the driver pile. Full details are below. Core: - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range New Drivers: - i.MXRT1050 clock driver and bindings - i.MX8DXL clock driver and bindings - i.MX93 clock driver and bindings - NCO blocks on Apple SoCs - Audio clks on StarFive JH7100 RISC-V SoC - Add support for the new Renesas RZ/V2L SoC - Qualcomm SDX65 A7 PLL - Qualcomm SM6350 GPU clks - Qualcomm SM6125, SM6350, QCS2290 display clks - Qualcomm MSM8226 multimedia clks Updates: - Kunit tests for clk-gate implementation - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments - Mark mux table as const in clk-mux - Make the all_lists array const - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on Renesas R-Car S4-8 - Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates) - Use of_device_get_match_data() instead of open-coding on Rockchip rk3568 - Reintroduce the expected fractional-divider behaviour that disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS - Remove SYS PLL 1/2 clock gates for i.MX8M* - Remove AUDIO MCLK ROOT from i.MX7D - Add fracn gppll clock type used by i.MX93 - Add new composite clock for i.MX93 - Add missing media mipi phy ref clock for i.MX8MP - Fix off by one in imx_lpcg_parse_clks_from_dt() - Rework for the imx pll14xx - sama7g5: One low priority fix for GCLK of PDMC - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8 - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3 - Add CAN-FD clocks on Renesas R-Car V3U - Qualcomm SC8280XP RPMCC - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML - Convert various Qualcomm drivers to use clk_parent_data - Remove test clocks from various Qualcomm drivers - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs - Better pixel clk frequency support on Qualcomm RCG2 clks -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmJDd+gRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSVB4A//QWPv7tssTuHvVDOPz2q9rJFbjG6/fsuY d8i30y4uTSCWO2eErVUNKxRmrR5/DFJZ20cqv5aTXbiUk5BrmCiD0hyb8RZIU4jD Kw+1pEvnbBWR6s5TK0spMS9Nz9Uq8DBwoeczHAVQrRZu0I8AkOvWlVH7GncejYOP KJJSiuByXHRLxudrLWTwwkz3xoDTZBeBcqNbBnatgXnPgSzBh0Uz+0q8r9V9Hugw +TwXoTVt+XDrX2ihPzZlfm9xoOTOP6GoP+FYCo8gCfW4N0VjUDr3+D95rJoI2gp/ O9UyAx1+tMLlkVxuHcX1npHDPX6Nrqan68DBV4LQRdhSO3dfVD95AE16GzMrD+2t nuIzT+rst42UUzipCK/8pHLd/YCcPmIsH4C25ZnaF/I59kI/seF3zbekMTY7hS8D q9sTZYj1X32aHGTtN6QK6QJIscGHYfnSG3M8VLOnhmWDKmW+6AWJ2MVZdcCqDgnS AXnx1p7gwd/lHV8P+e1YoiUyh5a3tJ2CFFdQCu0tPwL0xLehHyfjKqtjYZjL2+hl 6pF8KxEy6BiMEZWqXmIUJK6xWFO9VpQ2uPxtV8pCTIAXmOOPenWhH7lkeTtIDRc0 hzJURj9HEcpEDakC4/16yfr+YnEn/vjhhZ8a4Vymsnl2IsI71C17vDmRer875Bp/ KPMBn6I1naQ= =fP8L -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There's one large change in the core clk framework here. We change how clk_set_rate_range() works so that the frequency is re-evaulated each time the rate is changed. Previously we wouldn't let clk providers see a rate that was different if it was still within the range, which could be bad for power if the clk could run slower when a range expands. Now the clk provider can decide to do something differently when the constraints change. This broke Nvidia's clk driver so we had to wait for the fix for that to bake a little more in -next. The rate range patch series also introduced a kunit suite for the clk framework that we're going to extend in the next release. It already made it easy to find corner cases in the rate range patches so I'm excited to see it cover more clk code and increase our confidence in core framework patches in the future. I also added a kunit test for the basic clk gate code and that work will continue to cover more basic clk types: muxes, dividers, etc. Beyond the core code we have the usual set of clk driver updates and additions. Qualcomm again dominates the diffstat here with lots more SoCs being supported and i.MX follows afer that with a similar number of SoCs gaining clk drivers. Beyond those large additions there's drivers being modernized to use clk_parent_data so we can move away from global string names for all the clks in an SoC. Finally there's lots of little fixes all over the clk drivers for typos, warnings, and missing clks that aren't critical and get batched up waiting for the next merge window to open. Nothing super big stands out in the driver pile. Full details are below. Core: - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range New Drivers: - i.MXRT1050 clock driver and bindings - i.MX8DXL clock driver and bindings - i.MX93 clock driver and bindings - NCO blocks on Apple SoCs - Audio clks on StarFive JH7100 RISC-V SoC - Add support for the new Renesas RZ/V2L SoC - Qualcomm SDX65 A7 PLL - Qualcomm SM6350 GPU clks - Qualcomm SM6125, SM6350, QCS2290 display clks - Qualcomm MSM8226 multimedia clks Updates: - Kunit tests for clk-gate implementation - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments - Mark mux table as const in clk-mux - Make the all_lists array const - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on Renesas R-Car S4-8 - Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates) - Use of_device_get_match_data() instead of open-coding on Rockchip rk3568 - Reintroduce the expected fractional-divider behaviour that disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS - Remove SYS PLL 1/2 clock gates for i.MX8M* - Remove AUDIO MCLK ROOT from i.MX7D - Add fracn gppll clock type used by i.MX93 - Add new composite clock for i.MX93 - Add missing media mipi phy ref clock for i.MX8MP - Fix off by one in imx_lpcg_parse_clks_from_dt() - Rework for the imx pll14xx - sama7g5: One low priority fix for GCLK of PDMC - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8 - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3 - Add CAN-FD clocks on Renesas R-Car V3U - Qualcomm SC8280XP RPMCC - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML - Convert various Qualcomm drivers to use clk_parent_data - Remove test clocks from various Qualcomm drivers - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs - Better pixel clk frequency support on Qualcomm RCG2 clks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate dt-bindings: clock: drop useless consumer example dt-bindings: clock: renesas: Make example 'clocks' parsable clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() clk: visconti: prevent array overflow in visconti_clk_register_gates() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments ...	2022-03-30 10:11:04 -07:00
Stephen Boyd	c64dd8ea8e	Merge branches 'clk-range', 'clk-uniphier', 'clk-apple' and 'clk-qcom' into clk-next ... - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range - Support for NCO blocks on Apple SoCs * clk-range: clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate clk: bcm: rpi: Run some clocks at the minimum rate allowed clk: bcm: rpi: Set a default minimum rate clk: bcm: rpi: Add variant structure clk: Add clk_drop_range clk: Always set the rate on clk_set_range_rate clk: Use clamp instead of open-coding our own clk: Always clamp the rounded rate clk: Enforce that disjoints limits are invalid clk: Introduce Kunit Tests for the framework clk: Fix clk_hw_get_clk() when dev is NULL * clk-uniphier: clk: uniphier: Fix fixed-rate initialization * clk-apple: clk: clk-apple-nco: Allow and fix module building MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE clk: clk-apple-nco: Add driver for Apple NCO dt-bindings: clock: Add Apple NCO * clk-qcom: (61 commits) clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: qcom: Add display clock controller driver for SM6125 dt-bindings: clock: add QCOM SM6125 display clock bindings clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig clk: qcom: gcc: Add emac GDSC support for SM8150 clk: qcom: gcc: sm8150: Fix some identation issues clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 clk: qcom: clk-rcg2: Update the frac table for pixel clock clk: qcom: clk-rcg2: Update logic to calculate D value for RCG clk: qcom: smd: Add missing MSM8998 RPM clocks clk: qcom: smd: Add missing RPM clocks for msm8992/4 dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks clk: qcom: gcc-ipq806x: add CryptoEngine resets dt-bindings: reset: add ipq8064 ce5 resets clk: qcom: gcc-ipq806x: add CryptoEngine clocks dt-bindings: clock: add ipq8064 ce5 clk define clk: qcom: gcc-ipq806x: add additional freq for sdc table clk: qcom: clk-rcg: add clk_rcg_floor_ops ops ...	2022-03-29 10:19:36 -07:00
Stephen Boyd	4222744d40	Merge branches 'clk-starfive', 'clk-ti', 'clk-terminate' and 'clk-cleanup' into clk-next ... - Audio clks on StarFive JH7100 RISC-V SoC - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments * clk-starfive: clk: starfive: Add JH7100 audio clock driver clk: starfive: jh7100: Support more clock types clk: starfive: jh7100: Make hw clock implementation reusable dt-bindings: clock: Add starfive,jh7100-audclk bindings dt-bindings: clock: Add JH7100 audio clock definitions clk: starfive: jh7100: Handle audio_div clock properly clk: starfive: jh7100: Don't round divisor up twice * clk-ti: clk: ti: Drop legacy compatibility clocks for dra7 clk: ti: Drop legacy compatibility clocks for am4 clk: ti: Drop legacy compatibility clocks for am3 clk: ti: Update component clocks to use ti_dt_clk_name() clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name() clk: ti: Add ti_dt_clk_name() helper to use clock-output-names clk: ti: Use clock-output-names for clkctrl clk: ti: Add ti_find_clock_provider() to use clock-output-names clk: ti: Optionally parse IO address from parent clock node clk: ti: Preserve node in ti_dt_clocks_register() clk: ti: Constify clkctrl_name * clk-terminate: clk: actions: Make sentinel elements more obvious clk: clps711x: Terminate clk_div_table with sentinel element clk: hisilicon: Terminate clk_div_table with sentinel element clk: loongson1: Terminate clk_div_table with sentinel element clk: actions: Terminate clk_div_table with sentinel element * clk-cleanup: clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments clk: COMMON_CLK_LAN966X should depend on SOC_LAN966 clk: Use of_device_get_match_data() clk: bcm2835: Remove unused variable clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver clk: cleanup comments clk: socfpga: cleanup spdx tags	2022-03-29 10:19:10 -07:00
Stephen Boyd	f9fca892af	Merge branches 'clk-xilinx', 'clk-kunit', 'clk-cs2000' and 'clk-renesas' into clk-next ... - Kunit tests for clk-gate implementation - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode * clk-xilinx: clk: zynqmp: replace warn_once with pr_debug for failed clock ops * clk-kunit: clk: gate: Add some kunit test suites * clk-cs2000: clk: cs2000-cp: convert driver to regmap clk: cs2000-cp: freeze config during register fiddling clk: cs2000-cp: make clock skip setting configurable clk: cs2000-cp: add support for dynamic mode clk: cs2000-cp: Make aux output function controllable dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode dt-bindings: clock: cs2000-cp: document cirrus,clock-skip flag dt-bindings: clock: cs2000-cp: document aux-output-source dt-bindings: clock: convert cs2000-cp bindings to yaml * clk-renesas: dt-bindings: clock: renesas: Make example 'clocks' parsable clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: renesas: r8a779f0: Add PFC clock clk: renesas: r8a779f0: Add I2C clocks clk: renesas: r8a779f0: Add WDT clock clk: renesas: r8a779f0: Fix RSW2 clock divider clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC dt-bindings: clock: renesas: Document RZ/V2L SoC dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions clk: renesas: r8a779a0: Add CANFD module clock clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3 clk: renesas: r8a7799[05]: Add MLP clocks clk: renesas: r8a779f0: Add SYS-DMAC clocks	2022-03-29 10:18:37 -07:00
Marek Vasut	892e0ddea1	clk: rs9: Add Renesas 9-series PCIe clock generator driver ... Add driver for Renesas 9-series PCIe clock generators. This driver is designed to support 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ series I2C PCIe clock generators, currently the only tested and supported chip is 9FGV0241. The driver is capable of configuring per-chip spread spectrum mode and output amplitude, as well as per-output slew rate. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20220226040723.143705-3-marex@denx.de [sboyd@kernel.org: Use non-underscore API for fixed factor] Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-03-18 14:09:27 -07:00
Martin Povišer	236541ace2	clk: clk-apple-nco: Allow and fix module building ... Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220312135722.20770-1-povik+lin@cutebit.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-03-15 09:56:12 -07:00
Martin Povišer	6641057d5d	clk: clk-apple-nco: Add driver for Apple NCO ... Add a common clock driver for NCO blocks found on Apple SoCs where they are typically the generators of audio clocks. Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220208183411.61090-3-povik+lin@cutebit.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-03-11 20:45:49 -08:00
Daire McNamara	635e5e7337	clk: microchip: Add driver for Microchip PolarFire SoC ... Add support for clock configuration on Microchip PolarFire SoC Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Co-developed-by: Padmarao Begari <padmarao.begari@microchip.com> Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> Co-developed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220222121143.3316880-2-conor.dooley@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-03-11 19:31:52 -08:00
Geert Uytterhoeven	7cd5c56054	clk: COMMON_CLK_LAN966X should depend on SOC_LAN966 ... The LAN966x Generic Clock Controller is only present on Microchip LAN966x SoCs. Hence add a dependency on SOC_LAN966, to prevent asking the user about this driver when configuring a kernel without LAN966x SoC support. Fixes: 54104ee023 ("clk: lan966x: Add lan966x SoC clock driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/eb102eae05e5667b9bd342a0c387f7f262d24bda.1645716471.git.geert+renesas@glider.be Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-03-11 19:27:49 -08:00
Maxime Ripard	723d0530d9	clk: Introduce Kunit Tests for the framework ... Let's test various parts of the rate-related clock API with the kunit testing framework. Cc: kunit-dev@googlegroups.com Tested-by: Daniel Latypov <dlatypov@google.com> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-3-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-03-11 19:14:38 -08:00
Horatiu Vultur	aa091a6a91	clk: lan966x: Fix linking error ... If the config options HAS_IOMEM is not set then the driver fails to link with the following error: clk-lan966x.c:(.text+0x950): undefined reference to `devm_platform_ioremap_resource' Therefor add missing dependencies: HAS_IOMEM and OF. Fixes: 54104ee023 ("clk: lan966x: Add lan966x SoC clock driver") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220219141536.460812-1-horatiu.vultur@microchip.com Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-02-24 16:53:24 -08:00
Daniel Mack	5edffb9805	clk: cs2000-cp: convert driver to regmap ... Regmap gives us caching, debugging infrastructure and other things for free and does away with open-coded bit-fiddling implementations. Signed-off-by: Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20220125093336.226787-10-daniel@zonque.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-01-25 14:23:16 -08:00
Stephen Boyd	a992acbb21	clk: gate: Add some kunit test suites ... Test various parts of the clk gate implementation with the kunit testing framework. Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Daniel Latypov <dlatypov@google.com> Cc: <kunit-dev@googlegroups.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220120175902.2165958-1-sboyd@kernel.org	2022-01-24 17:22:53 -08:00
Linus Torvalds	455e73a07f	We have a couple patches in the framework core this time around but ... they're mostly minor cleanups and some debugfs stuff. The real work that's in here is the typical pile of clk driver updates and new SoC support. Per usual (or maybe just recent trends), Qualcomm gains a handful of SoC drivers additions and has the largest diffstat. After that there are quite a few updates to the Allwinner (sunxi) drivers to support modular drivers and Renesas is heavily updated to add more support for various clks. Overall it looks pretty normal. New Drivers: - Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770 - MediaTek mt7986 SoC basic support - Clock and reset driver for Toshiba Visconti SoCs - Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8) - Allwinner D1 clks - Lan966x Generic Clock Controller driver and associated DT bindings - Qualcomm SDX65, SM8450, and MSM8976 GCC clks - Qualcomm SDX65 and SM8450 RPMh clks Updates: - Set suppress_bind_attrs to true for i.MX8ULP driver - Switch from do_div to div64_ul for throughout all i.MX drivers - Fix imx8mn_clko1_sels for i.MX8MN - Remove unused IPG_AUDIO_ROOT from i.MX8MP - Switch parent for audio_root_clk to audio ahb in i.MX8MP driver - Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung - Refactoring of the CPU clocks registration to use common interface - An update of the Exynos850 driver (support for more clock domains) required by the E850-96 development board - Prep for runtime PM and generic power domains on Tegra - Support modular Allwinner clk drivers via platform bus - Lan966x clock driver extended to support clock gating - Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and thermal (TSU) clocks and resets on Renesas RZ/G2L - Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock drivers, and in the Renesas SDHI driver - Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable - Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add GPU clock and resets on Renesas RZ/G2L - Add clk-provider.h to various Qualcomm clk drivers - devm version of clk_hw_register_gate() - kerneldoc fixes in a couple drivers -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmHfOa8RHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSX+Ew/9FaQLRh3ahN+qF8VMJ1K9qUciYBlU+UtC excKfTkJg+1JGMP8dGSRSi/aC/UyLPb0dJDRMKcSZPYIScP+wc3HJHm4i+CpxDcn /wXPW3tvY1CkVq1P7/baesoNiIle5zqpl4+0w9CN5KuoXctc35Pr1GqJ/C0XsDfQ DS3lpck65tr7Wy1muChT1ZR+7hGv6K7olR7FDYNVSDtfJcaOZENSLgbPF6eea0FR /dl+6o1COF23XAGF1GJg88DYRgnEqxLsfFTaC6Hz8DeQdKBVh9GF6tpgLhk7vsaG gcRZxU24KaUw0lNZGdzmagy8ZJ6aZhcuzXQKN9VecbTIhRYNTWmB1VsvbhhEVb1T 96kBAp/II1JZdh/8W7uOmg4Ahupap5+f6JKMfR3zD4aDXkNDsxyXBA5AXtC0GPGN 5340WiJsBz/dD9/YE+mQ7YZKhdvKaGEVbmVUpQHceapeTBk4EIHKSVIq5sKd7qiq ZHxOIizx5MgBJyoSeIxkB3j0KvwSTDNz6WM2F9gnNNtGfuSlA4NAnO1davINNQun +seP+deBviUl+P2u9iodRApfCiEuM3mA548KTba/Z1nJ7sN93/qrqr1FBAUSqY+k xNRXfXIzlOY9ifm6PlvU8QUK0XVtKjt0ld7pFzRkf6EU523DwzL2I2XIY2Eve2vA LaDihwcKyR0= =jB+l -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a couple patches in the framework core this time around but they're mostly minor cleanups and some debugfs stuff. The real work that's in here is the typical pile of clk driver updates and new SoC support. Per usual (or maybe just recent trends), Qualcomm gains a handful of SoC drivers additions and has the largest diffstat. After that there are quite a few updates to the Allwinner (sunxi) drivers to support modular drivers and Renesas is heavily updated to add more support for various clks. Overall it looks pretty normal. New Drivers: - Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770 - MediaTek mt7986 SoC basic support - Clock and reset driver for Toshiba Visconti SoCs - Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8) - Allwinner D1 clks - Lan966x Generic Clock Controller driver and associated DT bindings - Qualcomm SDX65, SM8450, and MSM8976 GCC clks - Qualcomm SDX65 and SM8450 RPMh clks Updates: - Set suppress_bind_attrs to true for i.MX8ULP driver - Switch from do_div to div64_ul for throughout all i.MX drivers - Fix imx8mn_clko1_sels for i.MX8MN - Remove unused IPG_AUDIO_ROOT from i.MX8MP - Switch parent for audio_root_clk to audio ahb in i.MX8MP driver - Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung - Refactoring of the CPU clocks registration to use common interface - An update of the Exynos850 driver (support for more clock domains) required by the E850-96 development board - Prep for runtime PM and generic power domains on Tegra - Support modular Allwinner clk drivers via platform bus - Lan966x clock driver extended to support clock gating - Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and thermal (TSU) clocks and resets on Renesas RZ/G2L - Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock drivers, and in the Renesas SDHI driver - Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable - Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add GPU clock and resets on Renesas RZ/G2L - Add clk-provider.h to various Qualcomm clk drivers - devm version of clk_hw_register_gate() - kerneldoc fixes in a couple drivers" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits) clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup() clk: mediatek: add mt7986 clock support clk: mediatek: add mt7986 clock IDs dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper clk: x86: Fix clk_gate_flags for RV_CLK_GATE clk: x86: Use dynamic con_id string during clk registration ACPI: APD: Add a fmw property clk-name drivers: acpi: acpi_apd: Remove unused device property "is-rv" x86: clk: clk-fch: Add support for newer family of AMD's SOC clk: ingenic: Add MDMA and BDMA clocks dt-bindings: clk/ingenic: Add MDMA and BDMA clocks clk: bm1880: remove kfrees on static allocations clk: Drop unused COMMON_CLK_STM32MP157_SCMI config clk: st: clkgen-mux: search reg within node or parent clk: st: clkgen-fsyn: search reg within node or parent clk: Enable/Disable runtime PM for clk_summary MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller clk: visconti: Add support common clock driver and reset driver ...	2022-01-12 17:02:27 -08:00