[ Upstream commit 35fc531a59 ]
The dev_err message is reporting an error about capture streams however
it is using the incorrect variable num_playback instead of num_capture.
Fix this by using the correct variable num_capture.
Fixes: a1d1e266b4 ("ASoC: SOF: Intel: Add Intel specific HDA stream operations")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250902120639.2626861-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b17d3724d ]
Using a single value of 22500000 for both 48000Hz and 44100Hz audio
will sometimes result in returning wrong dividers due to rounding.
Update the code to use the actual value for both.
Fixes: 51b2bb3f25 ("ASoC: wm8974: configure pll and mclk divider automatically")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250821082639.1301453-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d05afb53c6 ]
Using a single value of 22500000 for both 48000Hz and 44100Hz audio
will sometimes result in returning wrong dividers due to rounding.
Update the code to use the actual value for both.
Fixes: 294833fc9e ("ASoC: wm8940: Rewrite code to set proper clocks")
Reported-by: Ankur Tyagi <ankur.tyagi85@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Ankur Tyagi <ankur.tyagi85@gmail.com>
Link: https://patch.msgid.link/20250821082639.1301453-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d33c347104 upstream.
This laptop uses the ALC236 codec with COEF 0x7 and idx 1 to
control the mute LED. Enable the existing quirk for this device.
Signed-off-by: Praful Adiga <praful.adiga@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33b55b94bc upstream.
The q6i2s_set_fmt() function was defined but never linked into the
I2S DAI operations, resulting DAI format settings is being ignored
during stream setup. This change fixes the issue by properly linking
the .set_fmt handler within the DAI ops.
Fixes: 30ad723b93 ("ASoC: qdsp6: audioreach: add q6apm lpass dai support")
Cc: stable@vger.kernel.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Message-ID: <20250908053631.70978-3-mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68f27f7c77 upstream.
If earlier opening of source graph fails (e.g. ADSP rejects due to
incorrect audioreach topology), the graph is closed and
"dai_data->graph[dai->id]" is assigned NULL. Preparing the DAI for sink
graph continues though and next call to q6apm_lpass_dai_prepare()
receives dai_data->graph[dai->id]=NULL leading to NULL pointer
exception:
qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001002 cmd
qcom-apm gprsvc:service:2:1: DSP returned error[1001002] 1
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: fail to start APM port 78
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on TX_CODEC_DMA_TX_3: -22
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
...
Call trace:
q6apm_graph_media_format_pcm+0x48/0x120 (P)
q6apm_lpass_dai_prepare+0x110/0x1b4
snd_soc_pcm_dai_prepare+0x74/0x108
__soc_pcm_prepare+0x44/0x160
dpcm_be_dai_prepare+0x124/0x1c0
Fixes: 30ad723b93 ("ASoC: qdsp6: audioreach: add q6apm lpass dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Message-ID: <20250904101849.121503-2-krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aea3493246 ]
The ALSA HwDep character device of the firewire-motu driver incorrectly
returns EPOLLOUT in poll(2), even though the driver implements no operation
for write(2). This misleads userspace applications to believe write() is
allowed, potentially resulting in unnecessarily wakeups.
This issue dates back to the driver's initial code added by a commit
71c3797779 ("ALSA: firewire-motu: add hwdep interface"), and persisted
when POLLOUT was updated to EPOLLOUT by a commit a9a08845e9 ('vfs: do
bulk POLL* -> EPOLL* replacement("").').
This commit fixes the bug.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/20250829233749.366222-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 829ee558f3 ]
ASUS VivoBook X515UA with PCI SSID 1043:106f had a default quirk
pickup via pin table that applies ALC256_FIXUP_ASUS_MIC, but this adds
a bogus built-in mic pin 0x13 enabled. This was no big problem
because the pin 0x13 was assigned as the secondary mic, but the recent
fix made the entries sorted, hence this bogus pin appeared now as the
primary input and it broke.
For fixing the bug, put the right quirk entry for this device pointing
to ALC256_FIXUP_ASUS_MIC_NO_PRESENCE.
Fixes: 3b4309546b ("ALSA: hda: Fix headset detection failure due to unstable sort")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219897
Link: https://patch.msgid.link/20250324153233.21195-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bcd6659d49 upstream.
It was reported that HP EliteDesk 800 G4 DM 65W (SSID 103c:845a) needs
the similar quirk for enabling HDMI outputs, too. This patch adds the
corresponding quirk entry.
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250901115009.27498-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 43e0da37d5 ]
We already have a component driver named "RX-MACRO", which is
lpass-rx-macro.c. The tx macro component driver's name should
be "TX-MACRO" accordingly. Fix it.
Cc: Srinivas Kandagatla <srini@kernel.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250806140030.691477-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8410fe8109 ]
The entry of the validators table for UAC3 feature unit is defined
with a wrong sub-type UAC_FEATURE (= 0x06) while it should have been
UAC3_FEATURE (= 0x07). This patch corrects the entry value.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Link: https://patch.msgid.link/20250821150835.8894-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89f0addeee ]
The "p" pointer is void so sizeof(*p) is 1. The intent was to check
sizeof(*cs_desc), which is 3, instead.
Fixes: ecfd41166b ("ALSA: usb-audio: Validate UAC3 cluster segment descriptors")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aKL5kftC1qGt6lpv@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit eafae0fdd1 upstream.
The HP EliteBook x360 830 G6 and HP EliteBook 830 G6 have
Realtek HDA codec ALC215. It needs the ALC285_FIXUP_HP_GPIO_LED
quirk to enable the mute LED.
Cc: <stable@vger.kernel.org>
Signed-off-by: Evgeniy Harchenko <evgeniyharchenko.dev@gmail.com>
Link: https://patch.msgid.link/20250815095814.75845-1-evgeniyharchenko.dev@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb3bb14528 upstream.
Replace GFP_ATOMIC with GFP_KERNEL for dma_alloc_coherent() calls. This
change improves memory allocation reliability during firmware loading,
particularly during system resume when memory pressure is high. Because
of using GFP_KERNEL, reclaim can happen which can reduce the probability
of failure.
Fixes memory allocation failures observed during system resume with
fragmented memory conditions.
snd_sof_amd_vangogh 0000:04:00.5: error: failed to load DSP firmware after resume -12
Fixes: 145d7e5ae8 ("ASoC: SOF: amd: add option to use sram for data bin loading")
Fixes: 7e51a9e38a ("ASoC: SOF: amd: Add fw loader and renoir dsp ops to load firmware")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://patch.msgid.link/20250725190254.1081184-1-usama.anjum@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0e270f3297 ]
Use the regmap_write() for software reset in fsl_sai_config_disable would
cause the FSL_SAI_CSR_BCE bit to be cleared. Refer to
commit 197c53c8ec ("ASoC: fsl_sai: Don't disable bitclock for i.MX8MP")
FSL_SAI_CSR_BCE should not be cleared. So need to use regmap_update_bits()
instead of regmap_write() for these bit operations.
Fixes: dc78f7e591 ("ASoC: fsl_sai: Force a software reset when starting in consumer mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250807020318.2143219-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8167f4f425 ]
Qcom lpass is using component->id to keep DAI ID (A).
(S) static int lpass_platform_pcmops_open(
sruct snd_soc_component *component,
struct snd_pcm_substream *substream)
{ ^^^^^^^^^(B0)
...
(B1) struct snd_soc_pcm_runtime *soc_runtime = snd_soc_substream_to_rtd(substream);
(B2) struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(soc_runtime, 0);
...
(B3) unsigned int dai_id = cpu_dai->driver->id;
(A) component->id = dai_id;
...
}
This driver can get dai_id from substream (B0 - B3).
In this driver, below functions get dai_id from component->id (A).
(X) lpass_platform_pcmops_suspend()
(Y) lpass_platform_pcmops_resume()
(Z) lpass_platform_copy()
Here, (Z) can get it from substream (B0 - B3), don't need to use
component->id (A). On suspend/resume (X)(Y), dai_id can only be obtained
from component->id (A), because there is no substream (B0) in function
parameter.
But, component->id (A) itself should not be used for such purpose.
It is intilialized at snd_soc_component_initialize(), and parsed its ID
(= component->id) from device name (a).
int snd_soc_component_initialize(...)
{
...
if (!component->name) {
(a) component->name = fmt_single_name(dev, &component->id);
... ^^^^^^^^^^^^^
}
...
}
Unfortunately, current code is broken to start with.
There are many regmaps that the driver cares about, however its only
managing one (either dp or i2s) in component suspend/resume path.
I2S regmap is mandatory however other regmaps are setup based on flags
like "hdmi_port_enable" and "codec_dma_enable".
Correct thing for suspend/resume path to handle is by checking these
flags, instead of using component->id.
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87a56ouuob.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19f971057b ]
To be more resilient to codec-detection failures when the hardware
powers on slowly, add retry mechanism to the device verification check.
Similar pattern is found throughout a number of Realtek codecs. Our
tests show that 60ms delay is sufficient to address readiness issues on
rt5640 chip.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Xinxin Wan <xinxin.wan@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530142120.2944095-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92f59aeb13 ]
At the time being recalculate_boundary() is implemented with a
loop which shows up as costly in a perf profile, as depicted by
the annotate below:
0.00 : c057e934: 3d 40 7f ff lis r10,32767
0.03 : c057e938: 61 4a ff ff ori r10,r10,65535
0.21 : c057e93c: 7d 49 50 50 subf r10,r9,r10
5.39 : c057e940: 7d 3c 4b 78 mr r28,r9
2.11 : c057e944: 55 29 08 3c slwi r9,r9,1
3.04 : c057e948: 7c 09 50 40 cmplw r9,r10
2.47 : c057e94c: 40 81 ff f4 ble c057e940 <snd_pcm_ioctl+0xee0>
Total: 13.2% on that simple loop.
But what the loop does is to multiply the boundary by 2 until it is
over the wanted border. This can be avoided by using fls() to get the
boundary value order and shift it by the appropriate number of bits at
once.
This change provides the following profile:
0.04 : c057f6e8: 3d 20 7f ff lis r9,32767
0.02 : c057f6ec: 61 29 ff ff ori r9,r9,65535
0.34 : c057f6f0: 7d 5a 48 50 subf r10,r26,r9
0.23 : c057f6f4: 7c 1a 50 40 cmplw r26,r10
0.02 : c057f6f8: 41 81 00 20 bgt c057f718 <snd_pcm_ioctl+0xf08>
0.26 : c057f6fc: 7f 47 00 34 cntlzw r7,r26
0.09 : c057f700: 7d 48 00 34 cntlzw r8,r10
0.22 : c057f704: 7d 08 38 50 subf r8,r8,r7
0.04 : c057f708: 7f 5a 40 30 slw r26,r26,r8
0.35 : c057f70c: 7c 0a d0 40 cmplw r10,r26
0.13 : c057f710: 40 80 05 f8 bge c057fd08 <snd_pcm_ioctl+0x14f8>
0.00 : c057f714: 57 5a f8 7e srwi r26,r26,1
Total: 1.7% with that loopless alternative.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://patch.msgid.link/4836e2cde653eebaf2709ebe30eec736bb8c67fd.1749202237.git.christophe.leroy@csgroup.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d91cb261c ]
snd_soc_remove_pcm_runtime() might be called with rtd == NULL which will
leads to null pointer dereference.
This was reproduced with topology loading and marking a link as ignore
due to missing hardware component on the system.
On module removal the soc_tplg_remove_link() would call
snd_soc_remove_pcm_runtime() with rtd == NULL since the link was ignored,
no runtime was created.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20250619084222.559-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b3cb7f434 ]
Parsing the dapm_widget_tokens is also needed for DSPless mode as it is
setting the snd_soc_dapm_widget.no_wname_in_kcontrol_name flag for the
kcontrol creation from DAPM widgets.
Without that flag set, the following warnings might appear because of long
control names:
ALSA: Control name 'eqiir.2.1 Post Mixer Analog Playback IIR Eq bytes' truncated to 'eqiir.2.1 Post Mixer Analog Playback IIR Eq'
ALSA: Control name 'eqfir.2.1 Post Mixer Analog Playback FIR Eq bytes' truncated to 'eqfir.2.1 Post Mixer Analog Playback FIR Eq'
ALSA: Control name 'drc.2.1 Post Mixer Analog Playback DRC bytes' truncated to 'drc.2.1 Post Mixer Analog Playback DRC byte'
ALSA: Control name 'drc.2.1 Post Mixer Analog Playback DRC switch' truncated to 'drc.2.1 Post Mixer Analog Playback DRC swit'
ALSA: Control name 'gain.15.1 Pre Mixer Deepbuffer HDA Analog Volume' truncated to 'gain.15.1 Pre Mixer Deepbuffer HDA Analog V'
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250619102640.12068-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87aafc8580 ]
code mistakenly used a hardcoded index (codec[1]) instead of
iterating, over the codec array using the loop variable i.
Use codec[i] instead of codec[1] to match the loop iteration.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250621185233.4081094-1-alok.a.tiwari@oracle.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4ca928a6d ]
We currently log parse failures for ELD data and some disconnection events
as errors without rate limiting. These log messages can be triggered very
frequently in some situations, especially ELD parsing when there is nothing
connected to a HDMI port which will generate:
hdmi-audio-codec hdmi-audio-codec.1.auto: HDMI: Unknown ELD version 0
While there's doubtless work that could be done on reducing the number of
connection notification callbacks it's possible these may be legitimately
generated by poor quality physical connections so let's use rate limiting
to mitigate the log spam for the parse errors and lower the severity for
disconnect logging to debug level.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250613-asoc-hdmi-eld-logging-v1-1-76d64154d969@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1adcbdf54f ]
Although the jack polling is canceled at shutdown in
snd_hda_codec_shutdown(), it might be still re-triggered when the work
is being processed at cancel_delayed_work_sync() call. This may
result in the unexpected hardware access that should have been already
disabled.
For assuring to stop the jack polling, clear codec->jackpoll_interval
at shutdown.
Reported-by: Joakim Zhang <joakim.zhang@cixtech.com>
Closes: https://lore.kernel.org/20250619020844.2974160-4-joakim.zhang@cixtech.com
Tested-by: Joakim Zhang <joakim.zhang@cixtech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250623131437.10670-2-tiwai@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f7e54b23e ]
We used to call directly hda_jackpoll_work() from a couple of places
for updating the jack and notify to user-space, but this makes rather
the code flow fragile. Namely, because of those direct calls,
hda_jackpoll_work() uses snd_hda_power_up_pm() and *_down_pm() calls
instead of the standard snd_hda_power_up() and *_down() calls. The
latter pair assures the runtime PM resume sync, so it can avoid the
race against the PM callbacks gracefully, while the former pair may
continue if called concurrently, hence it may race (by design).
In this patch, we change the call pattern of hda_jackpoll_work(); now
all callers are replaced with the standard snd_hda_jack_report_sync()
and the additional schedule_delayed_work().
Since hda_jackpoll_work() is called only from the associated work,
it's always outside the PM code path, and we can safely use
snd_hda_power_up() and *_down() there instead. This allows us to
remove the racy check of power-state in hda_jackpoll_work(), as well
as the tricky cancel_delayed_work() and rescheduling at
hda_codec_runtime_suspend().
Reported-by: Joakim Zhang <joakim.zhang@cixtech.com>
Closes: https://lore.kernel.org/20250619020844.2974160-1-joakim.zhang@cixtech.com
Tested-by: Joakim Zhang <joakim.zhang@cixtech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250623131437.10670-4-tiwai@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f40ecc2743 ]
ASoC has 2 functions to set bias level.
(A) snd_soc_dapm_force_bias_level()
(B) snd_soc_dapm_set_bias_level()
snd_soc_dapm_force_bias_level() (A) will set dapm->bias_level (a) if
successed.
(A) int snd_soc_dapm_force_bias_level(...)
{
...
if (ret == 0)
(a) dapm->bias_level = level;
...
}
snd_soc_dapm_set_bias_level() (B) is also a function that sets bias_level.
It will call snd_soc_dapm_force_bias_level() (A) inside, but doesn't
set dapm->bias_level by itself. One note is that (A) might not be called.
(B) static int snd_soc_dapm_set_bias_level(...)
{
...
ret = snd_soc_card_set_bias_level(...);
...
if (dapm != &card->dapm)
(A) ret = snd_soc_dapm_force_bias_level(...);
...
ret = snd_soc_card_set_bias_level_post(...);
...
}
dapm->bias_level will be set if (A) was called, but might not be set
if (B) was called, even though it calles set_bias_level() function.
We should set dapm->bias_level if we calls
snd_soc_dapm_set_bias_level() (B), too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87qzyn4g4h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ecfd41166b upstream.
UAC3 class segment descriptors need to be verified whether their sizes
match with the declared lengths and whether they fit with the
allocated buffer sizes, too. Otherwise malicious firmware may lead to
the unexpected OOB accesses.
Fixes: 11785ef532 ("ALSA: usb-audio: Initial Power Domain support")
Reported-and-tested-by: Youngjun Lee <yjjuny.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250814081245.8902-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d832ccbc30 upstream.
UAC3 power domain descriptors need to be verified with its variable
bLength for avoiding the unexpected OOB accesses by malicious
firmware, too.
Fixes: 9a2fe9b801 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Reported-and-tested-by: Youngjun Lee <yjjuny.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250814081245.8902-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9dec09631 upstream.
My friend have Victus 16-d1xxx with board ID 8A26, the existing quirk
for Victus 16-d1xxx wasn't working because of different board ID
Tested on Victus 16-d1015nt Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250729181848.24432-4-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 956048a3cd upstream.
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on Victus 16-S0063NT Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250729181848.24432-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd7814a4c0 upstream.
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on Victus 16-r1xxx Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250725151436.51543-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a15ca0ca5 upstream.
During communication with Focusrite Scarlett Gen 2/3/4 USB audio
interfaces, -EPROTO is sometimes returned from scarlett2_usb_tx(),
snd_usb_ctl_msg() which can cause initialisation and control
operations to fail intermittently.
This patch adds up to 5 retries in scarlett2_usb(), with a delay
starting at 5ms and doubling each time. This follows the same approach
as the fix for usb_set_interface() in endpoint.c (commit f406005e16
("ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()")),
which resolved similar -EPROTO issues during device initialisation,
and is the same approach as in fcp.c:fcp_usb().
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Closes: https://github.com/geoffreybennett/linux-fcp/issues/41
Cc: stable@vger.kernel.org
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/aIdDO6ld50WQwNim@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cbe564974 upstream.
In __hdmi_lpe_audio_probe(), strscpy() is incorrectly called with the
length of the source string (excluding the NUL terminator) rather than
the size of the destination buffer. This results in one character less
being copied from 'card->shortname' to 'pcm->name'.
Use the destination buffer size instead to ensure the card name is
copied correctly.
Cc: stable@vger.kernel.org
Fixes: 75b1a8f9d6 ("ALSA: Convert strlcpy to strscpy when return value is unused")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250805234156.60294-1-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9f320dfb0f ]
There are a couple of cases where the error is ignored or the error
code isn't propagated in ca0132_alt_select_out(). Fix those.
Fixes: def3f0a5c7 ("ALSA: hda/ca0132 - Add quirk output selection structures.")
Link: https://patch.msgid.link/20250806094423.8843-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca592e2065 ]
There is no PHY for the XCVR module on i.MX93, the channel status needs
to be obtained from FSL_XCVR_RX_CS_DATA_* registers. And channel status
acknowledge (CSA) bit should be set once channel status is processed.
Fixes: e240b9329a ("ASoC: fsl_xcvr: Add support for i.MX93 platform")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250710030405.3370671-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec4a10ca4a ]
In commit 32c9c06adb ("ASoC: mediatek: disable buffer pre-allocation")
buffer pre-allocation was disabled to accommodate newer platforms that
have a limited reserved memory region for the audio frontend.
Turns out disabling pre-allocation across the board impacts platforms
that don't have this reserved memory region. Buffer allocation failures
have been observed on MT8173 and MT8183 based Chromebooks under low
memory conditions, which results in no audio playback for the user.
Since some MediaTek platforms already have dedicated reserved memory
pools for the audio frontend, the plan is to enable this for all of
them. This requires device tree changes. As a fallback, reinstate the
original policy of pre-allocating audio buffers at probe time of the
reserved memory pool cannot be found or used.
This patch covers the MT8173, MT8183, MT8186 and MT8192 platforms for
now, the reason being that existing MediaTek platform drivers that
supported reserved memory were all platforms that mainly supported
ChromeOS, and is also the set of devices that I can verify.
Fixes: 32c9c06adb ("ASoC: mediatek: disable buffer pre-allocation")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250612074901.4023253-7-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e10d7242e ]
This structure is really too larget to be allocated on the stack:
sound/soc/soc-ops.c:435:5: error: stack frame size (1296) exceeds limit (1280) in 'snd_soc_limit_volume' [-Werror,-Wframe-larger-than]
Change the function to dynamically allocate it instead.
There is probably a better way to do it since only two integer fields
inside of that structure are actually used, but this is the simplest
rework for the moment.
Fixes: 783db6851c ("ASoC: ops: Enforce platform maximum on initial value")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250610093057.2643233-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4c77d5af0 ]
commit 7f1186a8d7 ("ASoC: soc-dai: check return value at
snd_soc_dai_set_tdm_slot()") checks return value of
xlate_tdm_slot_mask() (A1)(A2).
/*
* ...
(Y) * TDM mode can be disabled by passing 0 for @slots. In this case @tx_mask,
* @rx_mask and @slot_width will be ignored.
* ...
*/
int snd_soc_dai_set_tdm_slot(...)
{
...
if (...)
(A1) ret = dai->driver->ops->xlate_tdm_slot_mask(...);
else
(A2) ret = snd_soc_xlate_tdm_slot_mask(...);
if (ret)
goto err;
...
}
snd_soc_xlate_tdm_slot_mask() (A2) will return -EINVAL if slots was 0 (X),
but snd_soc_dai_set_tdm_slot() allow to use it (Y).
(A) static int snd_soc_xlate_tdm_slot_mask(...)
{
...
if (!slots)
(X) return -EINVAL;
...
}
Call xlate_tdm_slot_mask() only if slots was non zero.
Reported-by: Giedrius Trainavičius <giedrius@blokas.io>
Closes: https://lore.kernel.org/r/CAMONXLtSL7iKyvH6w=CzPTxQdBECf++hn8RKL6Y4=M_ou2YHow@mail.gmail.com
Fixes: 7f1186a8d7 ("ASoC: soc-dai: check return value at snd_soc_dai_set_tdm_slot()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/8734cdfx59.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f80be5485 ]
add DMI entry for ASUS Vivobook PRO 15X (M6501RM)
to make the internal microphone function
Signed-off-by: Alexandru Andries <alex.andries.aa@gmail.com>
Link: https://patch.msgid.link/20250707220730.361290-1-alex.andries.aa@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
