[ Upstream commit 35fc531a59 ]
The dev_err message is reporting an error about capture streams however
it is using the incorrect variable num_playback instead of num_capture.
Fix this by using the correct variable num_capture.
Fixes: a1d1e266b4 ("ASoC: SOF: Intel: Add Intel specific HDA stream operations")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250902120639.2626861-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b17d3724d ]
Using a single value of 22500000 for both 48000Hz and 44100Hz audio
will sometimes result in returning wrong dividers due to rounding.
Update the code to use the actual value for both.
Fixes: 51b2bb3f25 ("ASoC: wm8974: configure pll and mclk divider automatically")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250821082639.1301453-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d05afb53c6 ]
Using a single value of 22500000 for both 48000Hz and 44100Hz audio
will sometimes result in returning wrong dividers due to rounding.
Update the code to use the actual value for both.
Fixes: 294833fc9e ("ASoC: wm8940: Rewrite code to set proper clocks")
Reported-by: Ankur Tyagi <ankur.tyagi85@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Ankur Tyagi <ankur.tyagi85@gmail.com>
Link: https://patch.msgid.link/20250821082639.1301453-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 33b55b94bc upstream.
The q6i2s_set_fmt() function was defined but never linked into the
I2S DAI operations, resulting DAI format settings is being ignored
during stream setup. This change fixes the issue by properly linking
the .set_fmt handler within the DAI ops.
Fixes: 30ad723b93 ("ASoC: qdsp6: audioreach: add q6apm lpass dai support")
Cc: stable@vger.kernel.org
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Message-ID: <20250908053631.70978-3-mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68f27f7c77 upstream.
If earlier opening of source graph fails (e.g. ADSP rejects due to
incorrect audioreach topology), the graph is closed and
"dai_data->graph[dai->id]" is assigned NULL. Preparing the DAI for sink
graph continues though and next call to q6apm_lpass_dai_prepare()
receives dai_data->graph[dai->id]=NULL leading to NULL pointer
exception:
qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001002 cmd
qcom-apm gprsvc:service:2:1: DSP returned error[1001002] 1
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: fail to start APM port 78
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on TX_CODEC_DMA_TX_3: -22
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
...
Call trace:
q6apm_graph_media_format_pcm+0x48/0x120 (P)
q6apm_lpass_dai_prepare+0x110/0x1b4
snd_soc_pcm_dai_prepare+0x74/0x108
__soc_pcm_prepare+0x44/0x160
dpcm_be_dai_prepare+0x124/0x1c0
Fixes: 30ad723b93 ("ASoC: qdsp6: audioreach: add q6apm lpass dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Message-ID: <20250904101849.121503-2-krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 43e0da37d5 ]
We already have a component driver named "RX-MACRO", which is
lpass-rx-macro.c. The tx macro component driver's name should
be "TX-MACRO" accordingly. Fix it.
Cc: Srinivas Kandagatla <srini@kernel.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250806140030.691477-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit eb3bb14528 upstream.
Replace GFP_ATOMIC with GFP_KERNEL for dma_alloc_coherent() calls. This
change improves memory allocation reliability during firmware loading,
particularly during system resume when memory pressure is high. Because
of using GFP_KERNEL, reclaim can happen which can reduce the probability
of failure.
Fixes memory allocation failures observed during system resume with
fragmented memory conditions.
snd_sof_amd_vangogh 0000:04:00.5: error: failed to load DSP firmware after resume -12
Fixes: 145d7e5ae8 ("ASoC: SOF: amd: add option to use sram for data bin loading")
Fixes: 7e51a9e38a ("ASoC: SOF: amd: Add fw loader and renoir dsp ops to load firmware")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://patch.msgid.link/20250725190254.1081184-1-usama.anjum@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0e270f3297 ]
Use the regmap_write() for software reset in fsl_sai_config_disable would
cause the FSL_SAI_CSR_BCE bit to be cleared. Refer to
commit 197c53c8ec ("ASoC: fsl_sai: Don't disable bitclock for i.MX8MP")
FSL_SAI_CSR_BCE should not be cleared. So need to use regmap_update_bits()
instead of regmap_write() for these bit operations.
Fixes: dc78f7e591 ("ASoC: fsl_sai: Force a software reset when starting in consumer mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250807020318.2143219-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8167f4f425 ]
Qcom lpass is using component->id to keep DAI ID (A).
(S) static int lpass_platform_pcmops_open(
sruct snd_soc_component *component,
struct snd_pcm_substream *substream)
{ ^^^^^^^^^(B0)
...
(B1) struct snd_soc_pcm_runtime *soc_runtime = snd_soc_substream_to_rtd(substream);
(B2) struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(soc_runtime, 0);
...
(B3) unsigned int dai_id = cpu_dai->driver->id;
(A) component->id = dai_id;
...
}
This driver can get dai_id from substream (B0 - B3).
In this driver, below functions get dai_id from component->id (A).
(X) lpass_platform_pcmops_suspend()
(Y) lpass_platform_pcmops_resume()
(Z) lpass_platform_copy()
Here, (Z) can get it from substream (B0 - B3), don't need to use
component->id (A). On suspend/resume (X)(Y), dai_id can only be obtained
from component->id (A), because there is no substream (B0) in function
parameter.
But, component->id (A) itself should not be used for such purpose.
It is intilialized at snd_soc_component_initialize(), and parsed its ID
(= component->id) from device name (a).
int snd_soc_component_initialize(...)
{
...
if (!component->name) {
(a) component->name = fmt_single_name(dev, &component->id);
... ^^^^^^^^^^^^^
}
...
}
Unfortunately, current code is broken to start with.
There are many regmaps that the driver cares about, however its only
managing one (either dp or i2s) in component suspend/resume path.
I2S regmap is mandatory however other regmaps are setup based on flags
like "hdmi_port_enable" and "codec_dma_enable".
Correct thing for suspend/resume path to handle is by checking these
flags, instead of using component->id.
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87a56ouuob.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19f971057b ]
To be more resilient to codec-detection failures when the hardware
powers on slowly, add retry mechanism to the device verification check.
Similar pattern is found throughout a number of Realtek codecs. Our
tests show that 60ms delay is sufficient to address readiness issues on
rt5640 chip.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Xinxin Wan <xinxin.wan@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530142120.2944095-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d91cb261c ]
snd_soc_remove_pcm_runtime() might be called with rtd == NULL which will
leads to null pointer dereference.
This was reproduced with topology loading and marking a link as ignore
due to missing hardware component on the system.
On module removal the soc_tplg_remove_link() would call
snd_soc_remove_pcm_runtime() with rtd == NULL since the link was ignored,
no runtime was created.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20250619084222.559-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b3cb7f434 ]
Parsing the dapm_widget_tokens is also needed for DSPless mode as it is
setting the snd_soc_dapm_widget.no_wname_in_kcontrol_name flag for the
kcontrol creation from DAPM widgets.
Without that flag set, the following warnings might appear because of long
control names:
ALSA: Control name 'eqiir.2.1 Post Mixer Analog Playback IIR Eq bytes' truncated to 'eqiir.2.1 Post Mixer Analog Playback IIR Eq'
ALSA: Control name 'eqfir.2.1 Post Mixer Analog Playback FIR Eq bytes' truncated to 'eqfir.2.1 Post Mixer Analog Playback FIR Eq'
ALSA: Control name 'drc.2.1 Post Mixer Analog Playback DRC bytes' truncated to 'drc.2.1 Post Mixer Analog Playback DRC byte'
ALSA: Control name 'drc.2.1 Post Mixer Analog Playback DRC switch' truncated to 'drc.2.1 Post Mixer Analog Playback DRC swit'
ALSA: Control name 'gain.15.1 Pre Mixer Deepbuffer HDA Analog Volume' truncated to 'gain.15.1 Pre Mixer Deepbuffer HDA Analog V'
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250619102640.12068-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4ca928a6d ]
We currently log parse failures for ELD data and some disconnection events
as errors without rate limiting. These log messages can be triggered very
frequently in some situations, especially ELD parsing when there is nothing
connected to a HDMI port which will generate:
hdmi-audio-codec hdmi-audio-codec.1.auto: HDMI: Unknown ELD version 0
While there's doubtless work that could be done on reducing the number of
connection notification callbacks it's possible these may be legitimately
generated by poor quality physical connections so let's use rate limiting
to mitigate the log spam for the parse errors and lower the severity for
disconnect logging to debug level.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250613-asoc-hdmi-eld-logging-v1-1-76d64154d969@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f40ecc2743 ]
ASoC has 2 functions to set bias level.
(A) snd_soc_dapm_force_bias_level()
(B) snd_soc_dapm_set_bias_level()
snd_soc_dapm_force_bias_level() (A) will set dapm->bias_level (a) if
successed.
(A) int snd_soc_dapm_force_bias_level(...)
{
...
if (ret == 0)
(a) dapm->bias_level = level;
...
}
snd_soc_dapm_set_bias_level() (B) is also a function that sets bias_level.
It will call snd_soc_dapm_force_bias_level() (A) inside, but doesn't
set dapm->bias_level by itself. One note is that (A) might not be called.
(B) static int snd_soc_dapm_set_bias_level(...)
{
...
ret = snd_soc_card_set_bias_level(...);
...
if (dapm != &card->dapm)
(A) ret = snd_soc_dapm_force_bias_level(...);
...
ret = snd_soc_card_set_bias_level_post(...);
...
}
dapm->bias_level will be set if (A) was called, but might not be set
if (B) was called, even though it calles set_bias_level() function.
We should set dapm->bias_level if we calls
snd_soc_dapm_set_bias_level() (B), too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87qzyn4g4h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca592e2065 ]
There is no PHY for the XCVR module on i.MX93, the channel status needs
to be obtained from FSL_XCVR_RX_CS_DATA_* registers. And channel status
acknowledge (CSA) bit should be set once channel status is processed.
Fixes: e240b9329a ("ASoC: fsl_xcvr: Add support for i.MX93 platform")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250710030405.3370671-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec4a10ca4a ]
In commit 32c9c06adb ("ASoC: mediatek: disable buffer pre-allocation")
buffer pre-allocation was disabled to accommodate newer platforms that
have a limited reserved memory region for the audio frontend.
Turns out disabling pre-allocation across the board impacts platforms
that don't have this reserved memory region. Buffer allocation failures
have been observed on MT8173 and MT8183 based Chromebooks under low
memory conditions, which results in no audio playback for the user.
Since some MediaTek platforms already have dedicated reserved memory
pools for the audio frontend, the plan is to enable this for all of
them. This requires device tree changes. As a fallback, reinstate the
original policy of pre-allocating audio buffers at probe time of the
reserved memory pool cannot be found or used.
This patch covers the MT8173, MT8183, MT8186 and MT8192 platforms for
now, the reason being that existing MediaTek platform drivers that
supported reserved memory were all platforms that mainly supported
ChromeOS, and is also the set of devices that I can verify.
Fixes: 32c9c06adb ("ASoC: mediatek: disable buffer pre-allocation")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250612074901.4023253-7-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e10d7242e ]
This structure is really too larget to be allocated on the stack:
sound/soc/soc-ops.c:435:5: error: stack frame size (1296) exceeds limit (1280) in 'snd_soc_limit_volume' [-Werror,-Wframe-larger-than]
Change the function to dynamically allocate it instead.
There is probably a better way to do it since only two integer fields
inside of that structure are actually used, but this is the simplest
rework for the moment.
Fixes: 783db6851c ("ASoC: ops: Enforce platform maximum on initial value")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250610093057.2643233-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4c77d5af0 ]
commit 7f1186a8d7 ("ASoC: soc-dai: check return value at
snd_soc_dai_set_tdm_slot()") checks return value of
xlate_tdm_slot_mask() (A1)(A2).
/*
* ...
(Y) * TDM mode can be disabled by passing 0 for @slots. In this case @tx_mask,
* @rx_mask and @slot_width will be ignored.
* ...
*/
int snd_soc_dai_set_tdm_slot(...)
{
...
if (...)
(A1) ret = dai->driver->ops->xlate_tdm_slot_mask(...);
else
(A2) ret = snd_soc_xlate_tdm_slot_mask(...);
if (ret)
goto err;
...
}
snd_soc_xlate_tdm_slot_mask() (A2) will return -EINVAL if slots was 0 (X),
but snd_soc_dai_set_tdm_slot() allow to use it (Y).
(A) static int snd_soc_xlate_tdm_slot_mask(...)
{
...
if (!slots)
(X) return -EINVAL;
...
}
Call xlate_tdm_slot_mask() only if slots was non zero.
Reported-by: Giedrius Trainavičius <giedrius@blokas.io>
Closes: https://lore.kernel.org/r/CAMONXLtSL7iKyvH6w=CzPTxQdBECf++hn8RKL6Y4=M_ou2YHow@mail.gmail.com
Fixes: 7f1186a8d7 ("ASoC: soc-dai: check return value at snd_soc_dai_set_tdm_slot()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/8734cdfx59.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f80be5485 ]
add DMI entry for ASUS Vivobook PRO 15X (M6501RM)
to make the internal microphone function
Signed-off-by: Alexandru Andries <alex.andries.aa@gmail.com>
Link: https://patch.msgid.link/20250707220730.361290-1-alex.andries.aa@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e837b59f8b ]
It is currently possible to configure a kernel with all Intel SoC
configs as loadable modules, but the board config as built-in. This
causes a link failure in the reference to the snd_soc_sof.ko module:
x86_64-linux-ld: sound/soc/intel/boards/sof_rt5682.o: in function `sof_rt5682_hw_params':
sof_rt5682.c:(.text+0x1f9): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sof_rt5682.c:(.text+0x234): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_rt5682.o: in function `sof_rt5682_codec_init':
sof_rt5682.c:(.text+0x3e0): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_cs42l42.o: in function `sof_cs42l42_hw_params':
sof_cs42l42.c:(.text+0x2a): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_nau8825.o: in function `sof_nau8825_hw_params':
sof_nau8825.c:(.text+0x7f): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_da7219.o: in function `da7219_codec_init':
sof_da7219.c:(.text+0xbf): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_maxim_common.o: in function `max_98373_hw_params':
sof_maxim_common.c:(.text+0x6f9): undefined reference to `sof_dai_get_tdm_slots'
x86_64-linux-ld: sound/soc/intel/boards/sof_realtek_common.o: in function `rt1015_hw_params':
sof_realtek_common.c:(.text+0x54c): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_realtek_common.o: in function `rt1308_hw_params':
sof_realtek_common.c:(.text+0x702): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_cirrus_common.o: in function `cs35l41_hw_params':
sof_cirrus_common.c:(.text+0x2f): undefined reference to `sof_dai_get_bclk'
Add an optional dependency on SND_SOC_SOF_INTEL_COMMON, to ensure that whenever
the SOF support is in a loadable module, none of the board code can be built-in.
This may be be a little heavy-handed, but I also don't see a reason why one would
want the boards to be built-in but not the SoC, so it shouldn't actually cause
any usability problems.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250709145626.64125-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 949ddec372 ]
This model requires an additional detection quirk to
enable the internal microphone.
Signed-off-by: Adam Queler <queler+k@gmail.com>
Link: https://patch.msgid.link/20250715031434.222062-1-queler+k@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7186b81807 ]
This patch adds DMI-based quirk for the Acer Nitro ANV15-41,
allowing the internal microphone to be detected correctly on
machines with "RB" as board vendor.
Signed-off-by: Yuzuru <yuzuru_10@proton.me>
Link: https://patch.msgid.link/20250622225754.20856-1-yuzuru_10@proton.me
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 16ea4666bb upstream.
It is better to print out the non supported num_dmics than printing that
it is not matching with 2 or 4.
Fixes: 2fbeff3338 ("ASoC: Intel: add sof_sdw_get_tplg_files ops")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250619104705.26057-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc78f7e591 upstream.
On an imx8mm platform with an external clock provider, when running the
receiver (arecord) and triggering an xrun with xrun_injection, we see a
channel swap/offset. This happens sometimes when running only the
receiver, but occurs reliably if a transmitter (aplay) is also
concurrently running.
It seems that the SAI loses track of frame sync during the trigger stop
-> trigger start cycle that occurs during an xrun. Doing just a FIFO
reset in this case does not suffice, and only a software reset seems to
get it back on track.
This looks like the same h/w bug that is already handled for the
producer case, so we now do the reset unconditionally on config disable.
Signed-off-by: Arun Raghavan <arun@asymptotic.io>
Reported-by: Pieterjan Camerlynck <p.camerlynck@televic.com>
Fixes: 3e3f8bd569 ("ASoC: fsl_sai: fix no frame clk in master mode")
Cc: stable@vger.kernel.org
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20250626130858.163825-1-arun@arunraghavan.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3b3312f28e ]
Return an error from driver probe if the DEVID read from the chip is not
one supported by this driver.
In cs35l56_hw_init() there is a check for valid DEVID, but the invalid
case was returning the value of ret. At this point in the code ret == 0
so the caller would think that cs35l56_hw_init() was successful.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 84851aa055 ("ASoC: cs35l56: Move part of cs35l56_init() to shared library")
Link: https://patch.msgid.link/20250703102521.54204-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7528e9bea ]
Matches should go from more specific to less specific, correct the
ordering of two cs42l43 entries.
Fixes: c052406765 ("ASoC: Intel: soc-acpi: arl: Add match entries for new cs42l43 laptops")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250626141841.77780-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d348b4181c ]
The audio configs with multi-function SDCA codecs can use the
sof_sdw_get_tplg_files ops to get function topologies dynamically.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250414063239.85200-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: a7528e9bea ("ASoC: Intel: soc-acpi: arl: Correct order of cs42l43 matches")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7f671b2f5 ]
Add some new match table entries on Arrowlake for some coming cs42l43
laptops.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: a7528e9bea ("ASoC: Intel: soc-acpi: arl: Correct order of cs42l43 matches")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3003af649 ]
As there are many combinations these follow a naming scheme to make
the content of link structures clearer:
cs35l56_<controller link>_<l or r><unique instance id>_adr
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: a7528e9bea ("ASoC: Intel: soc-acpi: arl: Correct order of cs42l43 matches")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 960aed31ee ]
The helpers that are provided by SND_SOC_ACPI_INTEL_MATCH
(soc-acpi-intel-ssp-common) are used in SND_SOC_INTEL_SOF_BOARD_HELPERS
(sof_board_helpers).
SND_SOC_ACPI_INTEL_MATCH is selected by machine drivers. When
skl_hda_dsp_generic uses the board helpers, it select
SND_SOC_INTEL_SOF_BOARD_HELPERS only but not SND_SOC_ACPI_INTEL_MATCH
which initroduce the undefined symbol errors. However, it makes more
sense that SND_SOC_INTEL_SOF_BOARD_HELPERS select
SND_SOC_ACPI_INTEL_MATCH itself.
Fixes: b28b23dea3 ("ASoC: Intel: skl_hda_dsp_generic: use common module for DAI links")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506141543.dN0JJyZC-lkp@intel.com/
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20250626064420.450334-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbe8761216 ]
When USRC=0, there is underrun issue for the non-ideal ratio mode;
according to the reference mannual, the internal measured ratio can be
used with USRC=1 and IDRC=0.
Fixes: d0250cf4f2 ("ASoC: fsl_asrc: Add an option to select internal ratio mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250625020504.2728161-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba06528ad5 ]
MSI Bravo 17 (D7VF), like other laptops from the family,
has broken ACPI tables and needs a quirk for internal mic
to work properly.
Signed-off-by: Gabriel Santese <santesegabriel@gmail.com>
Link: https://patch.msgid.link/20250530005444.23398-1-santesegabriel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 592ab3936b ]
When the part is reset in component_probe, do not forget to reinit the
regcache, otherwise the cache can get out of sync with the part's
actual state. This fix is similar to commit 0a0342ede3
("ASoC: tas2770: Reinit regcache on reset") which concerned the
tas2770 driver.
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250406-apple-codec-changes-v5-3-50a00ec850a3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad18392962 ]
SN012776 is a speaker amp chip found in Apple's 2021 laptops. It appears
similar and more-or-less compatible to TAS2764. Extend the TAS2764
driver with some SN012776 specifics and configure the chip assuming
it's in one of the Apple machines.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250227-apple-codec-changes-v3-3-cbb130030acf@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 592ab3936b ("ASoC: tas2764: Reinit cache on part reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9079db287f ]
Driver gets and enables all regulator supplies in probe path
(wcd9335_parse_dt() and wcd9335_power_on_reset()), but does not cleanup
in final error paths and in unbind (missing remove() callback). This
leads to leaked memory and unbalanced regulator enable count during
probe errors or unbind.
Fix this by converting entire code into devm_regulator_bulk_get_enable()
which also greatly simplifies the code.
Fixes: 20aedafdf4 ("ASoC: wcd9335: add support to wcd9335 codec")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250526-b4-b4-asoc-wcd9395-vdd-px-fixes-v1-1-0b8a2993b7d3@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5099bc1b5 ]
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use dev_gpiod_get to get GPIO descriptor.
- Use gpiod_set_value to configure output value.
With legacy of_gpio API, the driver set gpio value 0 to assert reset,
and 1 to deassert reset. And the reset-gpios use GPIO_ACTIVE_LOW flag in
DTS, so set GPIOD_OUT_LOW when get GPIO descriptors, and set value 1 means
output low, set value 0 means output high with gpiod API.
The in-tree DTS files have the right polarity set up already so we can
expect this to "just work"
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250324-wcd-gpiod-v2-3-773f67ce3b56@nxp.com
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 9079db287f ("ASoC: codecs: wcd9335: Fix missing free of regulator supplies")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04cb269c20 ]
In tegra_ahub_probe(), check the result of function
of_device_get_match_data(), return an error code in case it fails.
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://patch.msgid.link/20250513123744.3041724-1-ruc_gongyuanjun@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f529c91be8 ]
The ISENSE/VSENSE blocks are only powered up when the amplifier
transitions from shutdown to active. This means that if those controls
are flipped on while the amplifier is already playing back audio, they
will have no effect.
Fix this by forcing a power cycle around transitions in those controls.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250406-apple-codec-changes-v5-1-50a00ec850a3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
