Upstream commit b7cb9a0343 ("dmaengine: idxd: Fix refcount underflow
on module unload") fixes a refcount underflow by replacing the call to
idxd_cleanup() in the remove function with direct cleanup calls. That works
fine upstream. However, upstream removed support for IOMMU_DEV_FEAT_IOPF,
which is still supported in v6.12.y. The backport of commit b7cb9a0343
into v6.12.y misses the call to disable it. This results in a warning
backtrace when unloading and reloading the module.
WARNING: CPU: 0 PID: 665849 at drivers/pci/ats.c:337 pci_reset_pri+0x4c/0x60
...
RIP: 0010:pci_reset_pri+0xa7/0x130
Add the missing cleanup call to fix the problem.
Fixes: ce81905bec ("dmaengine: idxd: Fix refcount underflow on module unload")
Cc: Yi Sun <yi.sun@intel.com>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5068b52548 upstream.
When we don't have a clock specified in the device tree, we have no way to
ensure the BAM is on. This is often the case for remotely-controlled or
remotely-powered BAM instances. In this case, we need to read num-channels
from the DT to have all the necessary information to complete probing.
However, at the moment invalid device trees without clock and without
num-channels still continue probing, because the error handling is missing
return statements. The driver will then later try to read the number of
channels from the registers. This is unsafe, because it relies on boot
firmware and lucky timing to succeed. Unfortunately, the lack of proper
error handling here has been abused for several Qualcomm SoCs upstream,
causing early boot crashes in several situations [1, 2].
Avoid these early crashes by erroring out when any of the required DT
properties are missing. Note that this will break some of the existing DTs
upstream (mainly BAM instances related to the crypto engine). However,
clearly these DTs have never been tested properly, since the error in the
kernel log was just ignored. It's safer to disable the crypto engine for
these broken DTBs.
[1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/
[2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/
Cc: stable@vger.kernel.org
Fixes: 48d163b1aa ("dmaengine: qcom: bam_dma: get num-channels and num-ees from dt")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-8-f560889e65d8@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e63419dbf2 ]
Fix a critical memory allocation bug in edma_setup_from_hw() where
queue_priority_map was allocated with insufficient memory. The code
declared queue_priority_map as s8 (*)[2] (pointer to array of 2 s8),
but allocated memory using sizeof(s8) instead of the correct size.
This caused out-of-bounds memory writes when accessing:
queue_priority_map[i][0] = i;
queue_priority_map[i][1] = i;
The bug manifested as kernel crashes with "Oops - undefined instruction"
on ARM platforms (BeagleBoard-X15) during EDMA driver probe, as the
memory corruption triggered kernel hardening features on Clang.
Change the allocation to use sizeof(*queue_priority_map) which
automatically gets the correct size for the 2D array structure.
Fixes: 2b6b3b7420 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20250830094953.3038012-1-anders.roxell@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39aaa33744 ]
The clean up in idxd_setup_wqs() has had a couple bugs because the error
handling is a bit subtle. It's simpler to just re-write it in a cleaner
way. The issues here are:
1) If "idxd->max_wqs" is <= 0 then we call put_device(conf_dev) when
"conf_dev" hasn't been initialized.
2) If kzalloc_node() fails then again "conf_dev" is invalid. It's
either uninitialized or it points to the "conf_dev" from the
previous iteration so it leads to a double free.
It's better to free partial loop iterations within the loop and then
the unwinding at the end can handle whole loop iterations. I also
renamed the labels to describe what the goto does and not where the goto
was located.
Fixes: 3fd2f4bc01 ("dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqs")
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Closes: https://lore.kernel.org/all/20250811095836.1642093-1-colin.i.king@gmail.com/
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/aJnJW3iYTDDCj9sk@stanley.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7cb9a0343 ]
A recent refactor introduced a misplaced put_device() call, resulting in a
reference count underflow during module unload.
There is no need to add additional put_device() calls for idxd groups,
engines, or workqueues. Although the commit claims: "Note, this also
fixes the missing put_device() for idxd groups, engines, and wqs."
It appears no such omission actually existed. The required cleanup is
already handled by the call chain:
idxd_unregister_devices() -> device_unregister() -> put_device()
Extend idxd_cleanup() to handle the remaining necessary cleanup and
remove idxd_cleanup_internals(), which duplicates deallocation logic
for idxd, engines, groups, and workqueues. Memory management is also
properly handled through the Linux device model.
Fixes: a409e919ca ("dmaengine: idxd: Refactor remove call with idxd_cleanup() helper")
Signed-off-by: Yi Sun <yi.sun@intel.com>
Tested-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20250729150313.1934101-3-yi.sun@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f41c538881 ]
The call to idxd_free() introduces a duplicate put_device() leading to a
reference count underflow:
refcount_t: underflow; use-after-free.
WARNING: CPU: 15 PID: 4428 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
...
Call Trace:
<TASK>
idxd_remove+0xe4/0x120 [idxd]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x197/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x74/0xf0
pci_unregister_driver+0x2e/0xb0
idxd_exit_module+0x34/0x7a0 [idxd]
__do_sys_delete_module.constprop.0+0x183/0x280
do_syscall_64+0x54/0xd70
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The idxd_unregister_devices() which is invoked at the very beginning of
idxd_remove(), already takes care of the necessary put_device() through the
following call path:
idxd_unregister_devices() -> device_unregister() -> put_device()
In addition, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device() may
trigger asynchronous cleanup via schedule_delayed_work(). If idxd_free() is
called immediately after, it can result in a use-after-free.
Remove the improper idxd_free() to avoid both the refcount underflow and
potential memory corruption during module unload.
Fixes: d5449ff1b0 ("dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove call")
Signed-off-by: Yi Sun <yi.sun@intel.com>
Tested-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20250729150313.1934101-2-yi.sun@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 157ae5ffd7 ]
Fix a potential deadlock bug. Observe that in the mtk-cqdma.c
file, functions like mtk_cqdma_issue_pending() and
mtk_cqdma_free_active_desc() properly acquire the pc lock before the vc
lock when handling pc and vc fields. However, mtk_cqdma_tx_status()
violates this order by first acquiring the vc lock before invoking
mtk_cqdma_find_active_desc(), which subsequently takes the pc lock. This
reversed locking sequence (vc → pc) contradicts the established
pc → vc order and creates deadlock risks.
Fix the issue by moving the vc lock acquisition code from
mtk_cqdma_find_active_desc() to mtk_cqdma_tx_status(). Ensure the pc lock
is acquired before the vc lock in the calling function to maintain correct
locking hierarchy. Note that since mtk_cqdma_find_active_desc() is a
static function with only one caller (mtk_cqdma_tx_status()), this
modification safely eliminates the deadlock possibility without affecting
other components.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency bugs
including deadlocks, data races and atomicity violations.
Fixes: b1f01e48df ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250508073634.3719-1-chenqiuji666@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e19bdbaa31 ]
DMA operates in Double Buffer Mode (DBM) when the transfer is cyclic and
there are at least two periods.
When DBM is enabled, the DMA toggles between two memory targets (SxM0AR and
SxM1AR), indicated by the SxSCR.CT bit (Current Target).
There is no need to update the next memory address if two periods are
configured, as SxM0AR and SxM1AR are already properly set up before the
transfer begins in the stm32_dma_start_transfer() function.
This avoids unnecessary updates to SxM0AR/SxM1AR, thereby preventing
potential Transfer Errors. Specifically, when the channel is enabled,
SxM0AR and SxM1AR can only be written if SxSCR.CT=1 and SxSCR.CT=0,
respectively. Otherwise, a Transfer Error interrupt is triggered, and the
stream is automatically disabled.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250624-stm32_dma_dbm_fix-v1-1-337c40d6c93e@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6ee78fc8f ]
The DMA map functions can fail and should be tested for errors.
If the mapping fails, unmap and return an error.
Fixes: b45b262cef ("dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250707075752.28674-2-fourier.thomas@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60095aca6b ]
The DMA map functions can fail and should be tested for errors.
In case of error, unmap the already mapped regions.
Fixes: 22843545b2 ("dma: mv_xor: Add support for DMA_INTERRUPT")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250701123753.46935-2-fourier.thomas@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0b1589b62 ]
This was fixed and re-introduced. 'type' is an enum, thus cast of
pointer on 64-bit compile test with W=1 causes:
mmp_tdma.c:644:9: error: cast to smaller integer type 'enum mmp_tdma_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Fixes: a67ba97dfb ("dmaengine: Use device_get_match_data()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250525-dma-fixes-v1-5-89d06dac9bcb@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 188c6ba1dd upstream.
The nbpf->chan[] array is allocated earlier in the nbpf_probe() function
and it has "num_channels" elements. These three loops iterate one
element farther than they should and corrupt memory.
The changes to the second loop are more involved. In this case, we're
copying data from the irqbuf[] array into the nbpf->chan[] array. If
the data in irqbuf[i] is the error IRQ then we skip it, so the iterators
are not in sync. I added a check to ensure that we don't go beyond the
end of the irqbuf[] array. I'm pretty sure this can't happen, but it
seemed harmless to add a check.
On the other hand, after the loop has ended there is a check to ensure
that the "chan" iterator is where we expect it to be. In the original
code we went one element beyond the end of the array so the iterator
wasn't in the correct place and it would always return -EINVAL. However,
now it will always be in the correct place. I deleted the check since
we know the result.
Cc: stable@vger.kernel.org
Fixes: b45b262cef ("dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/b13c5225-7eff-448c-badc-a2c98e9bcaca@sabinyo.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7e01511443 ]
Coalesce the direction bits from the enabled TX and/or RX channels into
the directions bit mask of dma_device. Without this mask set,
dma_get_slave_caps() in the DMAEngine fails, which prevents the driver
from being used with an IIO DMAEngine buffer.
Signed-off-by: Thomas Gessler <thomas.gessler@brueckmann-gmbh.de>
Reviewed-by: Suraj Gupta <suraj.gupta2@amd.com>
Tested-by: Folker Schwesinger <dev@folker-schwesinger.de>
Link: https://lore.kernel.org/r/20250507182101.909010-1-thomas.gessler@brueckmann-gmbh.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17502e7d7b ]
Running IDXD workloads in a container with the /dev directory mounted can
trigger a call trace or even a kernel panic when the parent process of the
container is terminated.
This issue occurs because, under certain configurations, Docker does not
properly propagate the mount replica back to the original mount point.
In this case, when the user driver detaches, the WQ is destroyed but it
still calls destroy_workqueue() attempting to completes all pending work.
It's necessary to check wq->wq and skip the drain if it no longer exists.
Signed-off-by: Yi Sun <yi.sun@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Link: https://lore.kernel.org/r/20250509000304.1402863-1-yi.sun@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd447415e7 ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
udma_probe() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 25dcb5dd7b ("dmaengine: ti: New driver for K3 UDMA")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Nathan Lynch <nathan.lynch@amd.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20250402023900.43440-1-bsdhenrymartin@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97994333de ]
Fix Smatch-detected issue:
drivers/dma/idxd/cdev.c:321 idxd_cdev_open() error:
uninitialized symbol 'sva'.
'sva' pointer may be used uninitialized in error handling paths.
Specifically, if PASID support is enabled and iommu_sva_bind_device()
returns an error, the code jumps to the cleanup label and attempts to
call iommu_sva_unbind_device(sva) without ensuring that sva was
successfully assigned. This triggers a Smatch warning about an
uninitialized symbol.
Initialize sva to NULL at declaration and add a check using
IS_ERR_OR_NULL() before unbinding the device. This ensures the
function does not use an invalid or uninitialized pointer during
cleanup.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20250410110216.21592-1-purvayeshi550@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e27af0514 ]
For fsl,imx93-edma4 two DMA channels share the same interrupt.
So in case fsl_edma3_tx_handler is called for the "wrong"
channel, the return code must be IRQ_NONE. This signalize that
the interrupt wasn't handled.
Fixes: 72f5801a4e ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Joy Zou <joy.zou@nxp.com>
Link: https://lore.kernel.org/r/20250424114829.9055-1-wahrenst@gmx.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae74cd15ad ]
The fix to block access from different address space did not return a
correct value for ->poll() change. kernel test bot reported that a
return value of type __poll_t is expected rather than int. Fix to return
POLLNVAL to indicate invalid request.
Fixes: 8dfa57aabf ("dmaengine: idxd: Fix allowing write() from different address spaces")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505081851.rwD7jVxg-lkp@intel.com/
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250508170548.2747425-1-dave.jiang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dfa57aabf ]
Check if the process submitting the descriptor belongs to the same
address space as the one that opened the file, reject otherwise.
Fixes: 6827738dc6 ("dmaengine: idxd: add a write() method for applications to submit work")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250421170337.3008875-1-dave.jiang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a409e919ca upstream.
The idxd_cleanup() helper cleans up perfmon, interrupts, internals and
so on. Refactor remove call with the idxd_cleanup() helper to avoid code
duplication. Note, this also fixes the missing put_device() for idxd
groups, enginces and wqs.
Fixes: bfe1d56091 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Cc: stable@vger.kernel.org
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250404120217.48772-10-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90022b3a69 upstream.
Memory allocated for idxd is not freed if an error occurs during
idxd_pci_probe(). To fix it, free the allocated memory in the reverse
order of allocation before exiting the function in case of an error.
Fixes: bfe1d56091 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-8-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46a5cca76c upstream.
Memory allocated for idxd is not freed if an error occurs during
idxd_alloc(). To fix it, free the allocated memory in the reverse order
of allocation before exiting the function in case of an error.
Fixes: a8563a33a5 ("dmanegine: idxd: reformat opcap output to match bitmap_parse() input")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-7-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5449ff1b0 upstream.
The remove call stack is missing idxd cleanup to free bitmap, ida and
the idxd_device. Call idxd_free() helper routines to make sure we exit
gracefully.
Fixes: bfe1d56091 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Cc: stable@vger.kernel.org
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250404120217.48772-9-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61d651572b upstream.
The idxd_cleanup_internals() function only decreases the reference count
of groups, engines, and wqs but is missing the step to release memory
resources.
To fix this, use the cleanup helper to properly release the memory
resources.
Fixes: ddf742d4f3 ("dmaengine: idxd: Add missing cleanup for early error out in probe call")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250404120217.48772-6-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa6f4f945b upstream.
Memory allocated for groups is not freed if an error occurs during
idxd_setup_groups(). To fix it, free the allocated memory in the reverse
order of allocation before exiting the function in case of an error.
Fixes: defe49f960 ("dmaengine: idxd: fix group conf_dev lifetime")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-4-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 817bced19d upstream.
Memory allocated for engines is not freed if an error occurs during
idxd_setup_engines(). To fix it, free the allocated memory in the
reverse order of allocation before exiting the function in case of an
error.
Fixes: 75b9113090 ("dmaengine: idxd: fix engine conf_dev lifetime")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-3-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fd2f4bc01 upstream.
Memory allocated for wqs is not freed if an error occurs during
idxd_setup_wqs(). To fix it, free the allocated memory in the reverse
order of allocation before exiting the function in case of an error.
Fixes: 7c5dd23e57 ("dmaengine: idxd: fix wq conf_dev 'struct device' lifetime")
Fixes: 700af3a0a2 ("dmaengine: idxd: add 'struct idxd_dev' as wrapper for conf_dev")
Fixes: de5819b994 ("dmaengine: idxd: track enabled workqueues in bitmap")
Fixes: b0325aefd3 ("dmaengine: idxd: add WQ operation cap restriction support")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-2-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ca9590c39 upstream.
Currently, a local dma_cap_mask_t variable is used to store device
cap_mask within udma_of_xlate(). However, the DMA_PRIVATE flag in
the device cap_mask can get cleared when the last channel is released.
This can happen right after storing the cap_mask locally in
udma_of_xlate(), and subsequent dma_request_channel() can fail due to
mismatch in the cap_mask. Fix this by removing the local dma_cap_mask_t
variable and directly using the one from the dma_device structure.
Fixes: 25dcb5dd7b ("dmaengine: ti: New driver for K3 UDMA")
Cc: stable@vger.kernel.org
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Link: https://lore.kernel.org/r/20250417075521.623651-1-y-abhilashchandra@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df180e6530 upstream.
Several issues with this change:
* The analysis is flawed and it's unclear what problem is being
fixed. There is no difference between wait_event_freezable_timeout()
and wait_event_timeout() with respect to device interrupts. And of
course "the interrupt notifying the finish of an operation happens
during wait_event_freezable_timeout()" -- that's how it's supposed
to work.
* The link at the "Closes:" tag appears to be an unrelated
use-after-free in idxd.
* It introduces a regression: dmatest threads are meant to be
freezable and this change breaks that.
See discussion here:
https://lore.kernel.org/dmaengine/878qpa13fe.fsf@AUSNATLYNCH.amd.com/
Fixes: e87ca16e99 ("dmaengine: dmatest: Fix dmatest waiting less when interrupted")
Signed-off-by: Nathan Lynch <nathan.lynch@amd.com>
Link: https://lore.kernel.org/r/20250403-dmaengine-dmatest-revert-waiting-less-v1-1-8227c5a3d7c8@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e87ca16e99 ]
Change the "wait for operation finish" logic to take interrupts into
account.
When using dmatest with idxd DMA engine, it's possible that during
longer tests, the interrupt notifying the finish of an operation
happens during wait_event_freezable_timeout(), which causes dmatest to
cleanup all the resources, some of which might still be in use.
This fix ensures that the wait logic correctly handles interrupts,
preventing premature cleanup of resources.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502171134.8c403348-lkp@intel.com
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250305230007.590178-1-vinicius.gomes@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9c59da76c ]
There is kernel dump when do module test:
sysfs: cannot create duplicate filename
/devices/platform/soc@0/44000000.bus/44000000.dma-controller/dma/dma0chan0
__dma_async_device_channel_register+0x128/0x19c
dma_async_device_register+0x150/0x454
fsl_edma_probe+0x6cc/0x8a0
platform_probe+0x68/0xc8
fsl_edma_cleanup_vchan will unlink vchan.chan.device_node, while
dma_async_device_unregister needs the link to do
__dma_async_device_channel_unregister. So need move fsl_edma_cleanup_vchan
after dma_async_device_unregister to make sure channel could be freed.
So clean up chan after dma_async_device_unregister to address this.
Fixes: 6f93b93b2a ("dmaengine: fsl-edma: kill the tasklets upon exit")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250228071720.3780479-1-peng.fan@oss.nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e883c64778 ]
The .probe() of edma_driver calls of_parse_phandle_with_fixed_args() but
does not release the obtained OF nodes. Thus add a of_node_put() call.
This bug was found by an experimental verification tool that I am
developing.
Fixes: 1be5336bc7 ("dmaengine: edma: New device tree binding")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20241219020507.1983124-3-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ceb8bf2cea ]
Commit cdd30ebb1b ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: 2505f87eb3 ("hwmon: (nct6775): Actually make use of the HWMON_NCT6775 symbol namespace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b65d5322e ]
Fix the following smatch static checker warning:
drivers/dma/loongson2-apb-dma.c:189 ls2x_dma_write_cmd()
warn: was expecting a 64 bit value instead of '~(((0)) + (((~((0))) - (((1)) << (0)) + 1) & (~((0)) >> ((8 * 4) - 1 - (4)))))'
The GENMASK macro used "unsigned long", which caused build issues when
using a 32-bit toolchain because it would try to access bits > 31. This
patch switches GENMASK to GENMASK_ULL, which uses "unsigned long long".
Fixes: 71e7d3cb6e ("dmaengine: ls2x-apb: New driver for the Loongson LS2X APB DMA controller")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/87cdc025-7246-4548-85ca-3d36fdc2be2d@stanley.mountain/
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20241028093413.1145820-1-zhoubinbin@loongson.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c43ec96e8d upstream.
The at_xdmac_memset_create_desc may return NULL, which will lead to a
null pointer dereference. For example, the len input is error, or the
atchan->free_descs_list is empty and memory is exhausted. Therefore, add
check to avoid this.
Fixes: b206d9a23a ("dmaengine: xdmac: Add memset support")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Link: https://lore.kernel.org/r/20241029082845.1185380-1-chenridong@huaweicloud.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d55e8a16f upstream.
The ADMAC attached to the AOP has complex power sequencing, and is
power gated when the probe callback runs. Move the register reads
to other functions, where we can guarantee that the hardware is
switched on.
Fixes: 568aa6dd64 ("dmaengine: apple-admac: Allocate cache SRAM to channels")
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20241124-admac-power-v1-1-58f2165a4d55@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccfa3131d4 upstream.
Current implementation of fsl_edma3_attach_pd() does not provide a
cleanup path, resulting in a memory leak. For example,
dev_pm_domain_detach() is not called after dev_pm_domain_attach_by_id(),
and the device link created with the DL_FLAG_STATELESS is not released
explicitly.
Therefore, provide a cleanup function fsl_edma3_detach_pd() and call it
upon failure. Also add a devm_add_action_or_reset() call with this
function after a successful fsl_edma3_attach_pd().
Fixes: 72f5801a4e ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241221075712.3297200-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dcbef0798e upstream.
The get_dma_ops and set_dma_ops APIs were never for driver to use. Remove
these calls from QDMA driver. Instead, pass the DMA device pointer from the
qdma_platdata structure.
Fixes: 73d5fc92a1 ("dmaengine: amd: qdma: Add AMD QDMA driver")
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240918181022.2155715-1-lizhi.hou@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebc008699f upstream.
Currently, the driver does not return the correct DMA status when a DMA
pause is issued by the client drivers. This causes GPCDMA users to
assume that DMA is still running, while in reality, the DMA is paused.
Return DMA_PAUSED for tx_status() if the channel is paused in the middle
of a transfer.
Fixes: ee17028009 ("dmaengine: tegra: Add tegra gpcdma driver")
Cc: stable@vger.kernel.org
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Link: https://lore.kernel.org/r/20241212124412.5650-1-kkartik@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0e870a0e9 upstream.
The recently submitted fix-commit revealed a problem in the iDMA 32-bit
platform code. Even though the controller supported only a single master
the dw_dma_acpi_filter() method hard-coded two master interfaces with IDs
0 and 1. As a result the sanity check implemented in the commit
b336268dde ("dmaengine: dw: Add peripheral bus width verification")
got incorrect interface data width and thus prevented the client drivers
from configuring the DMA-channel with the EINVAL error returned. E.g.,
the next error was printed for the PXA2xx SPI controller driver trying
to configure the requested channels:
> [ 164.525604] pxa2xx_spi_pci 0000:00:07.1: DMA slave config failed
> [ 164.536105] pxa2xx_spi_pci 0000:00:07.1: failed to get DMA TX descriptor
> [ 164.543213] spidev spi-SPT0001:00: SPI transfer failed: -16
The problem would have been spotted much earlier if the iDMA 32-bit
controller supported more than one master interfaces. But since it
supports just a single master and the iDMA 32-bit specific code just
ignores the master IDs in the CTLLO preparation method, the issue has
been gone unnoticed so far.
Fix the problem by specifying the default master ID for both memory
and peripheral devices in the driver data. Thus the issue noticed for
the iDMA 32-bit controllers will be eliminated and the ACPI-probed
DW DMA controllers will be configured with the correct master ID by
default.
Cc: stable@vger.kernel.org
Fixes: b336268dde ("dmaengine: dw: Add peripheral bus width verification")
Fixes: 199244d694 ("dmaengine: dw: add support of iDMA 32-bit hardware")
Reported-by: Ferry Toth <fntoth@gmail.com>
Closes: https://lore.kernel.org/dmaengine/ZuXbCKUs1iOqFu51@black.fi.intel.com/
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/dmaengine/ZuXgI-VcHpMgbZ91@black.fi.intel.com/
Tested-by: Ferry Toth <fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241104095142.157925-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 362f1bf98a upstream.
The for_each_child_of_node() loop requires explicit calls to
of_node_put() to decrement the child's refcount upon early exits (break,
goto, return).
Add the missing calls in the two early exits before the goto
instructions.
Cc: stable@vger.kernel.org
Fixes: f7d12ef53d ("dma: mv_xor: add Device Tree binding")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241011-dma_mv_xor_of_node_put-v1-1-3c2de819f463@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver fixes for:
- TI driver fix to set EOP for cyclic BCDMA transfers
- sh rz-dmac driver fix for handling config with zero address
-----BEGIN PGP SIGNATURE-----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=Ngtc
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- TI driver fix to set EOP for cyclic BCDMA transfers
- sh rz-dmac driver fix for handling config with zero address
* tag 'dmaengine-fix-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ti: k3-udma: Set EOP for all TRs in cyclic BCDMA transfer
dmaengine: sh: rz-dmac: handle configs where one address is zero
When receiving data in cyclic mode from PDMA peripherals, where reload
count is set to infinite, any TR in the set can potentially be the last
one of the overall transfer. In such cases, the EOP flag needs to be set
in each TR and PDMA's Static TR "Z" parameter should be set, matching
the size of the TR.
This is required for the teardown to function properly and cleanup the
internal state memory. This only affects platforms using BCDMA and not
those using UDMA-P, which could set EOP flag in the teardown TR
automatically.
Similarly when transmitting data in cyclic mode to PDMA peripherals, the
EOP flag needs to be set to get the teardown completion signal
correctly.
Fixes: 0177947397 ("dmaengine: ti: k3-udma: Initial support for K3 BCDMA")
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Verdin AM62
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Jai Luthra <jai.luthra@linux.dev>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240930-z_cnt-v2-1-9d38aba149a2@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Configs like the ones coming from the MMC subsystem will have either
'src' or 'dst' zeroed, resulting in an unknown bus width. This will bail
out on the RZ DMA driver because of the sanity check for a valid bus
width. Reorder the code, so that the check will only be applied when the
corresponding address is non-zero.
Fixes: 5000d37042 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241007110200.43166-6-wsa+renesas@sang-engineering.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
ep93xx_dma.c: In function 'ep93xx_dma_of_probe':
ep93xx_dma.c:1409:74: warning: '%u' directive output may be truncated
writing between 1 and 8 bytes into a region
of size 2 [-Wformat-truncation=]
snprintf(dma_clk_name, sizeof(dma_clk_name), "m2p%u", i);
^~
Fixes: d7333f9d33 ("dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409172024.pU8U5beA-lkp@intel.com/
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/2bf9c37aad8f085839f9c63104f7275742f51945.camel@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
