[ Upstream commit 5a869d0177 ]
With TLS enabled, records that are encrypted and appended to TLS TX
list can fail to see a retry if the underlying TCP socket is busy, for
example, hitting an EAGAIN from tcp_sendmsg_locked(). This is not known
to the NVMe TCP driver, as the TLS layer successfully generated a record.
Typically, the TLS write_space() callback would ensure such records are
retried, but in the NVMe TCP Host driver, write_space() invokes
nvme_tcp_write_space(). This causes a partially sent record in the TLS TX
list to timeout after not being retried.
This patch fixes the above by calling queue->write_space(), which calls
into the TLS layer to retry any pending records.
Fixes: be8e82caa6 ("nvme-tcp: enable TLS handshake upcall")
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb642e2d30 ]
For queue-depth I/O policy, this patch fixes unbalanced I/Os across
nvme multipaths.
Issue Description:
The RETRY disposition incorrectly increments ns->ctrl->nr_active
counter and reinitializes iostat start-time. In such cases nr_active
counter never goes back to zero until that path disconnects and
reconnects.
Such a path is not chosen for new I/Os if multiple RETRY cases on a given
a path cause its queue-depth counter to be artificially higher compared
to other paths. This leads to unbalanced I/Os across paths.
The patch skips incrementing nr_active if NVME_MPATH_CNT_ACTIVE is already
set. And it skips restarting io stats if NVME_MPATH_IO_STATS is already set.
base-commit: e989a3da2d371a4b6597ee8dee5c72e407b4db7a
Fixes: d4d957b53d ("nvme-multipath: support io stats on the mpath device")
Signed-off-by: Amit Chaudhary <achaudhary@purestorage.com>
Reviewed-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit eeaed48980 upstream.
On the TUXEDO InfinityBook S Gen8, a Samsung 990 Evo NVMe leads to
a high power consumption in s2idle sleep (3.5 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a sleep with
a lower power consumption, typically around 1 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit db5a5406fb ]
It’s possible for more than one async command to be in flight from
__nvmet_fc_send_ls_req. For each command, a tgtport reference is taken.
In the current code, only one put work item is queued at a time, which
results in a leaked reference.
To fix this, move the work item to the nvmet_fc_ls_req_op struct, which
already tracks all resources related to the command.
Fixes: 710c69dbac ("nvmet-fc: avoid deadlock on delete association path")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ac3c2889b ]
I recently ran into an issue where the PI generated using the block layer
integrity code differs from that from a kernel using the PRACT fallback
when the block layer integrity code is disabled, and I tracked this down
to us using PRACT incorrectly.
The NVM Command Set Specification (section 5.33 in 1.2, similar in older
versions) specifies the PRACT insert behavior as:
Inserted protection information consists of the computed CRC for the
protection information format (refer to section 5.3.1) in the Guard
field, the LBAT field value in the Application Tag field, the LBST
field value in the Storage Tag field, if defined, and the computed
reference tag in the Logical Block Reference Tag.
Where the computed reference tag is defined as following for type 1 and
type 2 using the text below that is duplicated in the respective bullet
points:
the value of the computed reference tag for the first logical block of
the command is the value contained in the Initial Logical Block
Reference Tag (ILBRT) or Expected Initial Logical Block Reference Tag
(EILBRT) field in the command, and the computed reference tag is
incremented for each subsequent logical block.
So we need to set ILBRT field, but we currently don't. Interestingly
this works fine on my older type 1 formatted SSD, but Qemu trips up on
this. We already set ILBRT for Write Same since commit aeb7bb061be5
("nvme: set the PRACT bit when using Write Zeroes with T10 PI").
To ease this, move the PI type check into nvme_set_ref_tag.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 288ff0d10b ]
nvme_submit_cmds() should check the rqlist before calling
nvme_write_sq_db(); if the list is empty, it must return immediately.
Fixes: beadf00885 ("nvme-pci: reverse request order in nvme_queue_rqs")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a58ac9bfc ]
Update the nvme_tcp_start_tls() function to use dev_err() instead of
dev_dbg() when a TLS error is detected. This ensures that handshake
failures are visible by default, aiding in debugging.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b2c214a95 ]
NVMe devices from multiple vendors appear to get stuck in a reset state
that we can't get out of with an NVMe level Controller Reset. The kernel
would report these with messages that look like:
Device not ready; aborting reset, CSTS=0x1
These have historically required a power cycle to make them usable
again, but in many cases, a PCIe FLR is sufficient to restart operation
without a power cycle. Try it if the initial controller reset fails
during any nvme reset attempt.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80f21806b8 ]
Commit 528589947c ("nvmet: initialize discovery subsys after debugfs
is initialized") changed nvmet_init() to initialize nvme discovery after
"nvmet" debugfs directory is initialized. The change broke nvmet_exit()
because discovery subsystem now depends on debugfs. Debugfs should be
destroyed after discovery subsystem. Fix nvmet_exit() to do that.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs96AfFQpyDKF_MdfJsnOEo=2V7dQgqjFv+k3t7H-=yGhA@mail.gmail.com/
Fixes: 528589947c ("nvmet: initialize discovery subsys after debugfs is initialized")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20250807053507.2794335-1-mkhalfella@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 528589947c ]
During nvme target initialization discovery subsystem is initialized
before "nvmet" debugfs directory is created. This results in discovery
subsystem debugfs directory to be created in debugfs root directory.
nvmet_init() ->
nvmet_init_discovery() ->
nvmet_subsys_alloc() ->
nvmet_debugfs_subsys_setup()
In other words, the codepath above is exeucted before nvmet_debugfs is
created. We get /sys/kernel/debug/nqn.2014-08.org.nvmexpress.discovery
instead of /sys/kernel/debug/nvmet/nqn.2014-08.org.nvmexpress.discovery.
Move nvmet_init_discovery() call after nvmet_init_debugfs() to fix it.
Fixes: 649fd41420 ("nvmet: add debugfs support")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0523c6cc87 ]
When restoring the default socket callbacks during a TLS handshake, we
need to acquire a write lock on sk_callback_lock. Previously, a read
lock was used, which is insufficient for modifying sk_user_data and
sk_data_ready.
Fixes: 675b453e02 ("nvmet-tcp: enable TLS handshake upcall")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71257925e8 ]
Procedures for nvme-mpath IO accounting:
1) initialize nvme_request and clear flags;
2) set NVME_MPATH_IO_STATS and increase inflight counter when IO
started;
3) check NVME_MPATH_IO_STATS and decrease inflight counter when IO is
done;
However, for the case nvme_fail_nonready_command(), both step 1) and 2)
are skipped, and if old nvme_request set NVME_MPATH_IO_STATS and then
request is reused, step 3) will still be executed, causing inflight I/O
counter to be negative.
Fix the problem by clearing nvme_request in nvme_fail_nonready_command().
Fixes: ea5e5f42cd ("nvme-fabrics: avoid double completions in nvmf_fail_nonready_command")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs_+dauobyYyP805t33WMJVzOWj=7+51p4_j9rA63D9sog@mail.gmail.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd8e34afd6 ]
The command word members of struct nvme_common_command are __le32 type,
so use helper le32_to_cpu() to read them properly.
Fixes: 9f079dda14 ("nvme: allow passthru cmd error logging")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80d7762e0a ]
When inserting a namespace into the controller's namespace list, the
function uses list_add_rcu() when the namespace is inserted in the middle
of the list, but falls back to a regular list_add() when adding at the
head of the list.
This inconsistency could lead to race conditions during concurrent
access, as users might observe a partially updated list. Fix this by
consistently using list_add_rcu() in both code paths to ensure proper
RCU protection throughout the entire function.
Fixes: be647e2c76 ("nvme: use srcu for iterating namespace list")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 190f4c2c86 ]
If nvmet receives commands with metadata there is a continuous memory
leak of kmalloc-128 slab or more precisely bio->bi_integrity.
Since commit bf4c89fc87 ("block: don't call bio_uninit from bio_endio")
each user of bio_init has to use bio_uninit as well. Otherwise the bio
integrity is not getting free. Nvmet uses bio_init for inline bios.
Uninit the inline bio to complete deallocation of integrity in bio.
Fixes: bf4c89fc87 ("block: don't call bio_uninit from bio_endio")
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e96d2d8c2 ]
Fix an error in nvme_log_err_passthru() where cdw14 was incorrectly
printed twice instead of cdw15. This fix ensures accurate logging of
the full passthrough command payload.
Fixes: 9f079dda14 ("nvme: allow passthru cmd error logging")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bf04c874f ]
Validate the request in nvme_tcp_handle_r2t() to ensure it's not part of
any list, otherwise a malicious R2T PDU might inject a loop in request
list processing.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f42d4796ee ]
When the socket is busy processing nvme_tcp_try_recv() might return
-EAGAIN, but this doesn't automatically imply that the sending side is
blocked, too. So check if there are pending requests once
nvme_tcp_try_recv() returns -EAGAIN and continue with the sending loop
to avoid I/O stalls.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Acked-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9ce6c9875f upstream.
Currently NVMe uring_cmd completions will complete locally, if they are
polled. This is done because those completions are always invoked from
task context. And while that is true, there's no guarantee that it's
invoked under the right ring context, or even task. If someone does
NVMe passthrough via multiple threads and with a limited number of
poll queues, then ringA may find completions from ringB. For that case,
completing the request may not be sound.
Always just punt the passthrough completions via task_work, which will
redirect the completion, if needed.
Cc: stable@vger.kernel.org
Fixes: 585079b6e4 ("nvme: wire up async polling for io passthrough commands")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 47a827cd79 ]
The abort handling logic expects that the state and the fcpreq are only
accessed when holding the reqlock lock.
While at it, only handle the aborts in the abort handler.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10f4a7cd72 ]
The command specific status code, 0x183, was introduced in the NVMe 2.0
specification defined to "Command Size Limits Exceeded" and only ever
applied to DSM and Copy commands. Fix the name and, remove the
incorrect translation to error codes and special treatment in the
target code for it.
Fixes: 3b7c33b28a ("nvme.h: add Write Zeroes definitions")
Cc: Chaitanya Kulkarni <chaitanyak@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e765bf89f4 ]
This commit adds the NVME_QUIRK_NO_DEEPEST_PS quirk for device
[126f:2262], which belongs to device SOLIDIGM P44 Pro SSDPFKKW020X7
The device frequently have trouble exiting the deepest power state (5),
resulting in the entire disk being unresponsive.
Verified by setting nvme_core.default_ps_max_latency_us=10000 and
observing the expected behavior.
Signed-off-by: Ilya Guterman <amfernusus@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b960f92ac ]
This commit adds NVME_QUIRK_NO_DEEPEST_PS and NVME_QUIRK_BOGUS_NID for
device [126f:1001].
It is similar to commit e89086c43f ("drivers/nvme: Add quirks for
device 126f:2262")
Diff is according the dmesg, use NVME_QUIRK_IGNORE_DEV_SUBNQN.
dmesg | grep -i nvme0:
nvme nvme0: pci function 0000:01:00.0
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: 12/0/0 default/read/poll queues
Link:https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e89086c43f0500bc7c4ce225495b73b8ce234c1f
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d8932133d ]
We need to lock this queue for that condition because the timeout work
executes per-namespace and can poll the poll CQ.
Reported-by: Hannes Reinecke <hare@kernel.org>
Closes: https://lore.kernel.org/all/20240902130728.1999-1-hare@kernel.org/
Fixes: a0fa9647a5 ("NVMe: add blk polling support")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40696426b8 ]
The only reason nvme_pci_npages_prp() could be used as a compile-time
known result in BUILD_BUG_ON() is because the compiler was always choosing
to inline the function. Under special circumstances (sanitizer coverage
functions disabled for __init functions on ARCH=um), the compiler decided
to stop inlining it:
drivers/nvme/host/pci.c: In function 'nvme_init':
include/linux/compiler_types.h:557:45: error: call to '__compiletime_assert_678' declared with attribute error: BUILD_BUG_ON failed: nvme_pci_npages_prp() > NVME_MAX_NR_ALLOCATIONS
557 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
include/linux/compiler_types.h:538:25: note: in definition of macro '__compiletime_assert'
538 | prefix ## suffix(); \
| ^~~~~~
include/linux/compiler_types.h:557:9: note: in expansion of macro '_compiletime_assert'
557 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:50:9: note: in expansion of macro 'BUILD_BUG_ON_MSG'
50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
| ^~~~~~~~~~~~~~~~
drivers/nvme/host/pci.c:3804:9: note: in expansion of macro 'BUILD_BUG_ON'
3804 | BUILD_BUG_ON(nvme_pci_npages_prp() > NVME_MAX_NR_ALLOCATIONS);
| ^~~~~~~~~~~~
Force it to be __always_inline to make sure it is always available for
use with BUILD_BUG_ON().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505061846.12FMyRjj-lkp@intel.com/
Fixes: c372cdd1ef ("nvme-pci: iod npages fits in s8")
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 650415fca0 ]
The original nvme subsystem design didn't have a CONNECTING state; the
state machine allowed transitions from RESETTING to LIVE directly.
With the introduction of nvme fabrics the CONNECTING state was
introduce. Over time the nvme-pci started to use the CONNECTING state as
well.
Eventually, a bug fix for the nvme-fc started to depend that the only
valid transition to LIVE was from CONNECTING. Though this change didn't
update the firmware update handler which was still depending on
RESETTING to LIVE transition.
The simplest way to address it for the time being is to switch into
CONNECTING state before going to LIVE state.
Fixes: d2fe192348 ("nvme: only allow entering LIVE from CONNECTING state")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Closes: https://lore.kernel.org/all/0134ea15-8d5f-41f7-9e9a-d7e6d82accaa@roeck-us.net
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac38b7ef70 ]
Ensure that TLS support is enabled in the kernel when
CONFIG_NVME_TARGET_TCP_TLS is enabled. Without this the code compiles,
but does not actually work unless something else enables CONFIG_TLS.
Fixes: 675b453e02 ("nvmet-tcp: enable TLS handshake upcall")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 521987940a ]
Ensure that TLS support is enabled in the kernel when
CONFIG_NVME_TCP_TLS is enabled. Without this the code compiles, but does
not actually work unless something else enables CONFIG_TLS.
Fixes: be8e82caa6 ("nvme-tcp: enable TLS handshake upcall")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77e40bbce9 ]
This patch addresses a data corruption issue observed in nvme-tcp during
testing.
In an NVMe native multipath setup, when an I/O timeout occurs, all
inflight I/Os are canceled almost immediately after the kernel socket is
shut down. These canceled I/Os are reported as host path errors,
triggering a failover that succeeds on a different path.
However, at this point, the original I/O may still be outstanding in the
host's network transmission path (e.g., the NIC’s TX queue). From the
user-space app's perspective, the buffer associated with the I/O is
considered completed since they're acked on the different path and may
be reused for new I/O requests.
Because nvme-tcp enables zero-copy by default in the transmission path,
this can lead to corrupted data being sent to the original target,
ultimately causing data corruption.
We can reproduce this data corruption by injecting delay on one path and
triggering i/o timeout.
To prevent this issue, this change ensures that all inflight
transmissions are fully completed from host's perspective before
returning from queue stop. To handle concurrent I/O timeout from multiple
namespaces under the same controller, always wait in queue stop
regardless of queue's state.
This aligns with the behavior of queue stopping in other NVMe fabric
transports.
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Randy Jennings <randyj@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a75401227e ]
A zero return means the reset was successfully scheduled. We don't want
to unquiesce the queues while the reset_work is pending, as that will
just flush out requeued requests to a failed completion.
Fixes: 71a5bb153b ("nvme: ensure disabling pairs with unquiesce")
Reported-by: Dhankaran Singh Ajravat <dhankaran@meta.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 26d7fb4fd4 upstream.
Commit 62baf70c32 caused the ANA log page to be re-read, even on
controllers that do not support ANA. While this should generally
harmless, some controllers hang on the unsupported log page and
never finish probing.
Fixes: 62baf70c32 ("nvme: re-read ANA log page after ns scan completes")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Tested-by: Srikanth Aithal <sraithal@amd.com>
[hch: more detailed commit message]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 70289ae5ca ]
Do not leak the tgtport reference when the work is already scheduled.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0b26ad0e1 ]
The reference counting code can be simplified. Instead taking a tgtport
refrerence at the beginning of nvmet_fc_alloc_hostport and put it back
if not a new hostport object is allocated, only take it when a new
hostport object is allocated.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3105f54a5 ]
The function returns bool so we should return false, not NULL. No
functional changes are expected.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62baf70c32 ]
When scanning for new namespaces we might have missed an ANA AEN.
The NVMe base spec (NVMe Base Specification v2.1, Figure 151 'Asynchonous
Event Information - Notice': Asymmetric Namespace Access Change) states:
A controller shall not send this even if an Attached Namespace
Attribute Changed asynchronous event [...] is sent for the same event.
so we need to re-read the ANA log page after we rescanned the namespace
list to update the ANA states of the new namespaces.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9546ad1a9b ]
Scanning for namespaces can take some time, so if the target is
reconfigured while the scan is running we may miss a Attached Namespace
Attribute Changed AEN.
Check if the NVME_AER_NOTICE_NS_CHANGED bit is set once the scan has
finished, and requeue scanning to pick up any missed change.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e70c301fae upstream.
Add requests to the tail of the list instead of the front so that they
are queued up in submission order.
Remove the re-reordering in blk_mq_dispatch_plug_list, virtio_queue_rqs
and nvme_queue_rqs now that the list is ordered as expected.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3396b9999 upstream.
Replace the semi-open coded request list helpers with a proper rq_list
type that mirrors the bio_list and has head and tail pointers. Besides
better type safety this actually allows to insert at the tail of the
list, which will be useful soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b304c006b upstream.
The functions nvmet_fc_iodnum() and nvmet_fc_fodnum() are currently
unutilized.
Following commit c53432030d ("nvme-fabrics: Add target support for FC
transport"), which introduced these two functions, they have not been
used at all in practice.
Remove them to resolve the compiler warnings.
Fix follow errors with clang-19 when W=1e:
drivers/nvme/target/fc.c:177:1: error: unused function 'nvmet_fc_iodnum' [-Werror,-Wunused-function]
177 | nvmet_fc_iodnum(struct nvmet_fc_ls_iod *iodptr)
| ^~~~~~~~~~~~~~~
drivers/nvme/target/fc.c:183:1: error: unused function 'nvmet_fc_fodnum' [-Werror,-Wunused-function]
183 | nvmet_fc_fodnum(struct nvmet_fc_fcp_iod *fodptr)
| ^~~~~~~~~~~~~~~
2 errors generated.
make[8]: *** [scripts/Makefile.build:207: drivers/nvme/target/fc.o] Error 1
make[7]: *** [scripts/Makefile.build:465: drivers/nvme/target] Error 2
make[6]: *** [scripts/Makefile.build:465: drivers/nvme] Error 2
make[6]: *** Waiting for unfinished jobs....
Fixes: c53432030d ("nvme-fabrics: Add target support for FC transport")
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2b5f0c5bc8 ]
The newly element to be added to the list is the first argument of
list_add_tail. This fix is missing dcfad4ab4d ("nvmet-fcloop: swap
the list_add_tail arguments").
Fixes: 437c0b824d ("nvme-fcloop: add target to host LS request support")
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eada75467f ]
The vectorized io_uring NVMe passthru opcodes don't yet support fixed
buffers. But since userspace can trigger this condition based on the
io_uring SQE parameters, it shouldn't cause a kernel warning.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 23fd22e55b ("nvme: wire up fixed buffer support for nvme passthrough")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f674e7b67 ]
The PCIe error handling has the nvme driver quiesce the device, attempt
to restart it, then wait for that restart to complete.
A PCIe DPC event also toggles the PCIe link. If the slot doesn't have
out-of-band presence detection, this will trigger a pciehp
re-enumeration.
The error handling that calls nvme_error_resume is holding the device
lock while this happens. This lock blocks pciehp's request to disconnect
the driver from proceeding.
Meanwhile the nvme's reset can't make forward progress because its
device isn't there anymore with outstanding IO, and the timeout handler
won't do anything to fix it because the device is undergoing error
handling.
End result: deadlocked.
Fix this by having the timeout handler short cut the disabling for a
disconnected PCIe device. The downside is that we're relying on an IO
timeout to clean up this mess, which could be a minute by default.
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56cf7ef0d4 ]
The PCI P2PDMA code will register the CMB block to the memory
hot-plugging subsystem, which have an alignment requirement. Memory
blocks that do not satisfy this alignment requirement (usually 2MB) will
lead to a WARNING from memory hotplugging.
Verify the CMB block's address and size against the alignment and only
try to send CMB blocks compatible with it to prevent this warning.
Tested on Intel DC D4502 SSD, which has a 512K CMB block that is too
small for memory hotplugging (thus PCI P2PDMA).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a3572e10f ]
CMB decoding should get disabled when the CMB block isn't successfully
registered to P2P DMA subsystem.
Clean up the CMBMSC register in this error handling codepath to disable
CMB decoding (and CMBLOC/CMBSZ registers).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f13409bb3f upstream.
It's not possible to call nvme_state_ctrl_state with holding a spin
lock, because nvme_state_ctrl_state calls cancel_delayed_work_sync
when fastfail is enabled.
Instead syncing the ASSOC_FLAG and state transitions using a lock, it's
possible to only rely on the state machine transitions. That means
nvme_fc_ctrl_connectivity_loss should unconditionally call
nvme_reset_ctrl which avoids the read race on the ctrl state variable.
Actually, it's not necessary to test in which state the ctrl is, the
reset work will only scheduled when the state machine is in LIVE state.
In nvme_fc_create_association, the LIVE state can only be entered if it
was previously CONNECTING. If this is not possible then the reset
handler got triggered. Thus just error out here.
Fixes: ee59e3820c ("nvme-fc: do not ignore connectivity loss during connecting")
Closes: https://lore.kernel.org/all/denqwui6sl5erqmz2gvrwueyxakl5txzbbiu3fgebryzrfxunm@iwxuthct377m/
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9bce6b5f89 ]
Commit 1f47ed294a ("block: cleanup and fix batch completion adding
conditions") modified the evaluation criteria for the third argument,
'ioerror', in the blk_mq_add_to_batch() function. Initially, the
function had checked if 'ioerror' equals zero. Following the commit, it
started checking for negative error values, with the presumption that
such values, for instance -EIO, would be passed in.
However, blk_mq_add_to_batch() callers do not pass negative error
values. Instead, they pass status codes defined in various ways:
- NVMe PCI and Apple drivers pass NVMe status code
- virtio_blk driver passes the virtblk request header status byte
- null_blk driver passes blk_status_t
These codes are either zero or positive, therefore the revised check
fails to function as intended. Specifically, with the NVMe PCI driver,
this modification led to the failure of the blktests test case nvme/039.
In this test scenario, errors are artificially injected to the NVMe
driver, resulting in positive NVMe status codes passed to
blk_mq_add_to_batch(), which unexpectedly processes the failed I/O in a
batch. Hence the failure.
To correct the ioerror check within blk_mq_add_to_batch(), make all
callers to uniformly pass the argument as boolean. Modify the callers to
check their specific status codes and pass the boolean value 'is_error'.
Also describe the arguments of blK_mq_add_to_batch as kerneldoc.
Fixes: 1f47ed294a ("block: cleanup and fix batch completion adding conditions")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20250311104359.1767728-3-shinichiro.kawasaki@wdc.com
[axboe: fold in documentation update]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
