[ Upstream commit 466f7a2fef ]
Do as in suspend, skip resume configuration steps if the device is already
pm_runtime suspended. This avoids reconfiguring a device that is already
in the correct low-power state and ensures that pm_runtime handles the
power state transitions properly.
Fixes: 31c24c1e93 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-3-ef1336246960@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ removed apex/wakeup variable declarations ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0792c1984a ]
Rework the power management in inv_icm42600_core_probe() to use
devm_pm_runtime_set_active_enabled(), which simplifies the runtime PM
setup by handling activation and enabling in one step.
Remove the separate inv_icm42600_disable_pm callback, as it's no longer
needed with the devm-managed approach.
Using devm_pm_runtime_enable() also fixes the missing disable of
autosuspend.
Update inv_icm42600_disable_vddio_reg() to only disable the regulator if
the device is not suspended i.e. powered-down, preventing unbalanced
disables.
Also remove redundant error msg on regulator_disable(), the regulator
framework already emits an error message when regulator_disable() fails.
This simplifies the PM setup and avoids manipulating the usage counter
unnecessarily.
Fixes: 31c24c1e93 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-1-ef1336246960@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a95a0b4e47 upstream.
Remove unnecessary calls to pm_runtime_disable(), pm_runtime_set_active(),
and pm_runtime_enable() from the resume path. These operations are not
required here and can interfere with proper pm_runtime state handling,
especially when resuming from a pm_runtime suspended state.
Fixes: 31c24c1e93 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250901-icm42pmreg-v3-2-ef1336246960@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit feb500c7ae upstream.
To convert level-triggered alarms into edge-triggered IIO events, alarms
are masked when they are triggered. To ensure we catch subsequent
alarms, we then periodically poll to see if the alarm is still active.
If it isn't, we unmask it. Active but masked alarms are stored in
current_masked_alarm.
If an active alarm is disabled, it will remain set in
current_masked_alarm until ams_unmask_worker clears it. If the alarm is
re-enabled before ams_unmask_worker runs, then it will never be cleared
from current_masked_alarm. This will prevent the alarm event from being
pushed even if the alarm is still active.
Fix this by recalculating current_masked_alarm immediately when enabling
or disabling alarms.
Fixes: d5c70627a7 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Tested-by: Erim, Salih <Salih.Erim@amd.com>
Acked-by: Erim, Salih <Salih.Erim@amd.com>
Link: https://patch.msgid.link/20250715002847.2035228-1-sean.anderson@linux.dev
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1315cc2dbd upstream.
AMS_ALARM_THR_DIRECT_MASK should be bit 0, not bit 1. This would cause
hysteresis to be enabled with a lower threshold of -28C. The temperature
alarm would never deassert even if the temperature dropped below the
upper threshold.
Fixes: d5c70627a7 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Tested-by: Erim, Salih <Salih.Erim@amd.com>
Acked-by: Erim, Salih <Salih.Erim@amd.com>
Link: https://patch.msgid.link/20250715003058.2035656-1-sean.anderson@linux.dev
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33d7ecbf69 upstream.
The ADF4350/1 features a programmable dual-modulus prescaler of 4/5 or 8/9.
When set to 4/5, the maximum RF frequency allowed is 3 GHz.
Therefore, when operating the ADF4351 above 3 GHz, this must be set to 8/9.
In this context not the RF output frequency is meant
- it's the VCO frequency.
Therefore move the prescaler selection after we derived the VCO frequency
from the desired RF output frequency.
This BUG may have caused PLL lock instabilities when operating the VCO at
the very high range close to 4.4 GHz.
Fixes: e31166f0fd ("iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250829-adf4350-fix-v2-1-0bf543ba797d@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3379c90032 upstream.
Change the 'ret' variable in ad5421_update_ctrl() from unsigned int to
int, as it needs to store either negative error codes or zero returned
by ad5421_write_unlocked().
Fixes: 5691b23489 ("staging:iio:dac: Add AD5421 driver")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20250901135726.17601-3-rongqianfeng@vivo.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9381ece76 upstream.
Change the 'ret' variable in ad5360_update_ctrl() from unsigned int to
int, as it needs to store either negative error codes or zero returned
by ad5360_write_unlocked().
Fixes: a3e2940c24 ("staging:iio:dac: Add AD5360 driver")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20250901135726.17601-2-rongqianfeng@vivo.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c63ba1c43 upstream.
There are two problems with the chip configuration in this driver:
- First, is that writing 12 bytes (ARRAY_SIZE(regs)) would anyhow
lead to a config overflow due to HW auto increment implementation
in the chip.
- Second, the i2c_smbus_write_block_data write ends up in writing
unexpected value to the channel_dis register, this is because
the smbus size that is 0x03 in this case gets written to the
register. The PAC1931/2/3/4 data sheet does not really specify
that block write is indeed supported.
This problem is probably not visible on PAC1934 version where all
channels are used as the chip is properly configured by luck,
but in our case whenusing PAC1931 this leads to nonfunctional device.
Fixes: 0fb528c825 (iio: adc: adding support for PAC193x)
Suggested-by: Rene Straub <mailto:rene.straub@belden.com>
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@belden.com>
Reviewed-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://patch.msgid.link/20250811130904.2481790-1-aleksandar.gerasimovski@belden.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33f5c69c4d ]
Fix iio_convert_raw_to_processed() offset handling for channels without
a scale attribute.
The offset has been applied to the raw64 value not to the original raw
value. Use the raw64 value so that the offset is taken into account.
Fixes: 14b457fdde ("iio: inkern: apply consumer scale when no channel scale is available")
Cc: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250831104825.15097-3-hansg@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f85406bf8 ]
There is an issue with the handling of negative channel scales
in iio_convert_raw_to_processed_unlocked() when the channel-scale
is of the IIO_VAL_INT_PLUS_[MICRO|NANO] type:
Things work for channel-scale values > -1.0 and < 0.0 because of
the use of signed values in:
*processed += div_s64(raw64 * (s64)scale_val2 * scale, 1000000LL);
Things will break however for scale values < -1.0. Lets for example say
that raw = 2, (caller-provided)scale = 10 and (channel)scale_val = -1.5.
The result should then be 2 * 10 * -1.5 = -30.
channel-scale = -1.5 means scale_val = -1 and scale_val2 = 500000,
now lets see what gets stored in processed:
1. *processed = raw64 * scale_val * scale;
2. *processed += raw64 * scale_val2 * scale / 1000000LL;
1. Sets processed to 2 * -1 * 10 = -20
2. Adds 2 * 500000 * 10 / 1000000 = 10 to processed
And the end result is processed = -20 + 10 = -10, which is not correct.
Fix this by always using the abs value of both scale_val and scale_val2
and if either is negative multiply the end-result by -1.
Note there seems to be an unwritten rule about negative
IIO_VAL_INT_PLUS_[MICRO|NANO] values that:
i. values > -1.0 and < 0.0 are written as val=0 val2=-xxx
ii. values <= -1.0 are written as val=-xxx val2=xxx
But iio_format_value() will also correctly display a third option:
iii. values <= -1.0 written as val=-xxx val2=-xxx
Since iio_format_value() uses abs(val) when val2 < 0.
This fix also makes iio_convert_raw_to_processed() properly handle
channel-scales using this third option.
Fixes: 48e44ce0f8 ("iio:inkern: Add function to read the processed value")
Cc: Matteo Martelli <matteomartelli3@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250831104825.15097-2-hansg@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfdc31e7cc ]
Temperature sensor returns the temperature of the mechanical parts
of the chip. If both accel and gyro are off, the temperature sensor is
also automatically turned off and returns invalid data.
In this case, returning -EBUSY error code is better then -EINVAL and
indicates userspace that it needs to retry reading temperature in
another context.
Fixes: bc3eb0207f ("iio: imu: inv_icm42600: add temperature sensor support")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250808-inv-icm42600-change-temperature-error-code-v1-1-986fbf63b77d@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a4135386fa ]
The driver code is full of intXX_t and uintXX_t types which is
not the pattern we use in the IIO subsystem. Switch the driver
to use kernel internal types for that. No functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250616090423.575736-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: dfdc31e7cc ("iio: imu: inv_icm42600: change invalid data error to -EBUSY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 27e6ddf291 ]
The vast majority of IIO drivers use aligned_s64 for the type of the
timestamp field. It is not a bug to use int64_t and until this series
iio_push_to_buffers_with_timestamp() took and int64_t timestamp, it
is inconsistent. This change is to remove that inconsistency and
ensure there is one obvious choice for future drivers.
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-19-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: dfdc31e7cc ("iio: imu: inv_icm42600: change invalid data error to -EBUSY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ae5bc07ec9 ]
Replace using stack-allocated buffers with a DMA-safe buffer for use
with spi_read(). This allows the driver to be safely used with
DMA-enabled SPI controllers.
The buffer array is also converted to a struct with a union to make the
usage of the memory in the buffer more clear and ensure proper alignment.
Fixes: 1f25ca11d8 ("iio: temperature: add support for Maxim thermocouple chips")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250721-iio-use-more-iio_declare_buffer_with_ts-3-v2-1-0c68d41ccf6c@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ iio_push_to_buffers_with_ts() => iio_push_to_buffers_with_timestamp() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 433b99e922 ]
Given that the buffer is copied to a kfifo that ultimately user space
can read, ensure we zero it.
Fixes: 403e5586b5 ("iio: light: as73211: New driver")
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250802164436.515988-2-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a801016da0 ]
Use this new type to both slightly simplify the code and avoid
confusing static analysis tools. Mostly this series is about consistency
to avoid this code pattern getting copied into more drivers.
Acked-By: Matti Vaittinen <mazziesaccount@gmail.com> #For bu27034, rpr0521
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-9-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 433b99e922 ("iio: light: as73211: Ensure buffer holes are zeroed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de18e978d0 upstream.
Fix passing a u32 value as a u16 buffer scan item. This works on little-
endian systems, but not on big-endian systems.
A new local variable is introduced for getting the register value and
the array is changed to a struct to make the data layout more explicit
rather than just changing the type and having to recalculate the proper
length needed for the timestamp.
Fixes: 1c28799257 ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250722-iio-use-more-iio_declare_buffer_with_ts-7-v2-1-d3ebeb001ed3@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43c0f6456f upstream.
`devm_gpiod_get_optional()` may return non-NULL error pointer on failure.
Check its return value using `IS_ERR()` and propagate the error if
necessary.
Fixes: df6e71256c ("iio: pressure: bmp280: Explicitly mark GPIO optional")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250818092740.545379-2-salah.triki@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6fa908abd1 ]
Fix the setting of the ODR register value in the probe function for
AD7177. The AD7177 chip has a different ODR value after reset than the
other chips (0x7 vs. 0x0) and 0 is a reserved value on that chip.
The driver already has this information available in odr_start_value
and uses it when checking valid values when writing to the
sampling_frequency attribute, but failed to set the correct initial
value in the probe function.
Fixes: 37ae8381cc ("iio: adc: ad7173: add support for additional models")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250710-iio-adc-ad7173-fix-setting-odr-in-probe-v1-1-78a100fec998@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66d4374d97 upstream.
Change the buffer disable callback from postdisable to predisable.
This balances the existing posteanble callback. Using postdisable
with posteanble can be problematic, for example, if update_scan_mode
fails, it would call postdisable without ever having called posteanble,
so the drivers using this would be in an unexpected state when
postdisable was called.
Fixes: af3008485e ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250703-iio-adc-ad_sigma_delta-buffer-predisable-v1-1-f2ab85138f1f@baylibre.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 399b883ec8 upstream.
Fix a potential out-of-bounds array access of the hw_xlate array in
bno055.c.
In bno055_get_regmask(), hw_xlate was iterated over the length of the
vals array instead of the length of the hw_xlate array. In the case of
bno055_gyr_scale, the vals array is larger than the hw_xlate array,
so this could result in an out-of-bounds access. In practice, this
shouldn't happen though because a match should always be found which
breaks out of the for loop before it iterates beyond the end of the
hw_xlate array.
By adding a new hw_xlate_len field to the bno055_sysfs_attr, we can be
sure we are iterating over the correct length.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507100510.rGt1YOOx-lkp@intel.com/
Fixes: 4aefe1c2bd ("iio: imu: add Bosch Sensortec BNO055 core driver")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250709-iio-const-data-19-v2-1-fb3fc9191251@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7e54d93287 ]
The SYNC_IN pulse width must be at least 1.5 x Tmclk, corresponding to
~2.5 µs at the lowest supported MCLK frequency. Add a 3 µs delay to
ensure reliable synchronization timing even for the worst-case scenario.
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/d3ee92a533cd1207cf5c5cc4d7bdbb5c6c267f68.1749063024.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a2f15c5a8 ]
Fix overallocating the size of the scan buffer by converting bits to
bytes. The size is meant to be in bytes, so scanbits needs to be
divided by 8.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250701-iio-adc-ad7173-add-spi-offload-support-v3-1-42abb83e3dac@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79dabbd505 ]
The OFFSET calculation in the prox_read_raw() was incorrectly using the
unit exponent, which is intended for SCALE calculations.
Remove the incorrect OFFSET calculation and set it to a fixed value of 0.
Cc: stable@vger.kernel.org
Fixes: 39a3a0138f ("iio: hid-sensors: Added Proximity Sensor Driver")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250331055022.1149736-4-lixu.zhang@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ adapted prox_attr array access to single structure member access ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83ded7cfac ]
The variables `scale_pre_decml`, `scale_post_decml`, and `scale_precision`
were assigned in commit d68c592e02 ("iio: hid-sensor-prox: Fix scale not
correct issue"), but due to a merge conflict in
commit 9c15db92a8 ("Merge tag 'iio-for-5.13a' of
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next"),
these assignments were lost.
Add back lost assignments and replace `st->prox_attr` with
`st->prox_attr[0]` because commit 596ef5cf65 ("iio: hid-sensor-prox: Add
support for more channels") changed `prox_attr` to an array.
Cc: stable@vger.kernel.org # 5.13+
Fixes: 9c15db92a8 ("Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250331055022.1149736-2-lixu.zhang@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ changed st->prox_attr[0] array access to st->prox_attr single struct member ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f92e93e25 upstream.
Throughout the various probe functions &indio_dev->dev is used before it
is initialized. This caused a kernel panic in st_sensors_power_enable()
when the call to devm_regulator_bulk_get_enable() fails and then calls
dev_err_probe() with the uninitialized device.
This seems to only cause a panic with dev_err_probe(), dev_err(),
dev_warn() and dev_info() don't seem to cause a panic, but are fixed
as well.
The issue is reported and traced here: [1]
Link: https://lore.kernel.org/all/AM7P189MB100986A83D2F28AF3FFAF976E39EA@AM7P189MB1009.EURP189.PROD.OUTLOOK.COM/ [1]
Cc: stable@vger.kernel.org
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://... [1]
Link: https://patch.msgid.link/20250527-st_iio_fix-v4-1-12d89801c761@gocontroll.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da9374819e upstream.
The buffer is set to 80 character. If a caller write more characters,
count is truncated to the max available space in "simple_write_to_buffer".
But afterwards a string terminator is written to the buffer at offset count
without boundary check. The zero termination is written OUT-OF-BOUND.
Add a check that the given buffer is smaller then the buffer to prevent.
Fixes: 035b498921 ("iio: backend: make sure to NULL terminate stack buffer")
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250508130612.82270-2-markus.burri@mt.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8ad595064 upstream.
Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().
Fixes: 1add698802 ("iio: adc: Add support for STM32 ADC core")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://patch.msgid.link/20250515083101.3811350-1-nichen@iscas.ac.cn
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d8d7c1dbc upstream.
The IIO core issues warnings when a scan mask is a subset of a previous
entry in the available_scan_masks array.
On a board using a MAX11601, the following warning is observed:
max1363 1-0064: available_scan_mask 7 subset of 6. Never used
This occurs because the entries in the max11607_mode_list[] array are not
ordered correctly. To fix this, reorder the entries so that no scan mask is
a subset of an earlier one.
While at it, reorder the mode_list[] arrays for other supported chips as
well, to prevent similar warnings on different variants.
Note fixes tag dropped as these were introduced over many commits a long
time back and the side effect until recently was a reduction in sampling
rate due to reading too many channels when only a few were desired.
Now we have a sanity check that reports this error but that is not
where the issue was introduced.
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250516173900.677821-2-festevam@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d21f2c2dd upstream.
Since commit 2718f15403 ("iio: sanity check available_scan_masks array"),
booting a board populated with a MAX11601 results in a flood of warnings:
max1363 1-0064: available_scan_mask 8 subset of 0. Never used
max1363 1-0064: available_scan_mask 9 subset of 0. Never used
max1363 1-0064: available_scan_mask 10 subset of 0. Never used
max1363 1-0064: available_scan_mask 11 subset of 0. Never used
max1363 1-0064: available_scan_mask 12 subset of 0. Never used
max1363 1-0064: available_scan_mask 13 subset of 0. Never used
...
These warnings are caused by incorrect offsets used for differential
channels in the MAX1363_4X_CHANS() and MAX1363_8X_CHANS() macros.
The max1363_mode_table[] defines the differential channel mappings as
follows:
MAX1363_MODE_DIFF_SINGLE(0, 1, 1 << 12),
MAX1363_MODE_DIFF_SINGLE(2, 3, 1 << 13),
MAX1363_MODE_DIFF_SINGLE(4, 5, 1 << 14),
MAX1363_MODE_DIFF_SINGLE(6, 7, 1 << 15),
MAX1363_MODE_DIFF_SINGLE(8, 9, 1 << 16),
MAX1363_MODE_DIFF_SINGLE(10, 11, 1 << 17),
MAX1363_MODE_DIFF_SINGLE(1, 0, 1 << 18),
MAX1363_MODE_DIFF_SINGLE(3, 2, 1 << 19),
MAX1363_MODE_DIFF_SINGLE(5, 4, 1 << 20),
MAX1363_MODE_DIFF_SINGLE(7, 6, 1 << 21),
MAX1363_MODE_DIFF_SINGLE(9, 8, 1 << 22),
MAX1363_MODE_DIFF_SINGLE(11, 10, 1 << 23),
Update the macros to follow this same pattern, ensuring that the scan masks
are valid and preventing the warnings.
Cc: stable@vger.kernel.org
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20250516173900.677821-1-festevam@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3281ddcea6 upstream.
The AXP717 ADC channel maps is missing a sentinel entry at the end. This
causes a KASAN warning.
Add the missing sentinel entry.
Fixes: 5ba0cb9258 ("iio: adc: axp20x_adc: add support for AXP717 ADC")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20250607135627.2086850-1-wens@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1fe16dc1a2 upstream.
fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with
iio_for_each_active_channel()) without making sure the indio_dev
stays in buffer mode.
There is a race if indio_dev exits buffer mode in the middle of the
interrupt that flushes the fifo. Fix this by calling
synchronize_irq() to ensure that no interrupt is currently running when
disabling buffer mode.
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
[...]
_find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290
fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178
fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c
irq_thread_fn from irq_thread+0x110/0x1f4
irq_thread from kthread+0xe0/0xfc
kthread from ret_from_fork+0x14/0x2c
Fixes: 79e3a5bdd9 ("iio: accel: fxls8962af: add hw buffered sampling")
Cc: stable@vger.kernel.org
Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250603-fxlsrace-v2-1-5381b36ba1db@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1e758b6132 ]
Fix ad3541/2r voltage ranges to be as per ad3542r datasheet,
rev. C, table 38 (page 57).
The wrong ad354xr ranges was generating erroneous Vpp output.
In more details:
- fix wrong number of ranges, they are 5 ranges, not 6,
- remove non-existent 0-3V range,
- adjust order, since ad3552r_find_range() get a wrong index,
producing a wrong Vpp as output.
Retested all the ranges on real hardware, EVALAD3542RFMCZ:
adi,output-range-microvolt (fdt):
<(000000) (2500000)>; ok (Rfbx1, switch 10)
<(000000) (5000000)>; ok (Rfbx1, switch 10)
<(000000) (10000000)>; ok (Rfbx1, switch 10)
<(-5000000) (5000000)>; ok (Rfbx2, switch +/- 5)
<(-2500000) (7500000)>; ok (Rfbx2, switch -2.5/7.5)
Fixes: 8f2b54824b ("drivers:iio:dac: Add AD3552R driver support")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250108-wip-bl-ad3552r-axi-v0-iio-testing-carlos-v2-1-2dac02f04638@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f665d7d33d ]
Extracting common code, to share common code to be used later
by the AXI driver version (ad3552r-axi.c).
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241028-wip-bl-ad3552r-axi-v0-iio-testing-v9-6-f6960b4f9719@kernel-space.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5ac6cb1c8 ]
Changes to use FIELD_PREP, so that driver-specific ad3552r_field_prep
is removed. Variables (arrays) that was used to call ad3552r_field_prep
are removed too.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241028-wip-bl-ad3552r-axi-v0-iio-testing-v9-5-f6960b4f9719@kernel-space.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5cdb098a3 ]
Fix Smatch-detected issue:
drivers/iio/adc/ad_sigma_delta.c:604 ad_sd_trigger_handler() error:
uninitialized symbol 'status_pos'.
The variable `status_pos` was only initialized in specific switch cases
(1, 2, 3, 4), which could leave it uninitialized if `reg_size` had an
unexpected value.
Fix by adding a default case to the switch block to catch unexpected
values of `reg_size`. Use `dev_err_ratelimited()` for error logging and
`goto irq_handled` instead of returning early.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Link: https://patch.msgid.link/20250410170408.8585-1-purvayeshi550@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 886a446b76 ]
On x86_32 s64 fields are only 32-bit aligned. Hence force the alignment of
the field and padding in the structure by using aligned_s64 instead.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-19-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 16038474e3 upstream.
According to spec temperature should be returned in milli degrees Celsius.
Add in_temp_scale to calculate from Celsius to milli Celsius.
Fixes: a3e0b51884 ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers")
Cc: stable@vger.kernel.org
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250505-fxls-v4-1-a38652e21738@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89944d88f8 upstream.
Fix incorrect value mask for register write. Register values are 8-bit,
not 9. If this function was called with a value > 0xFF and an even addr,
it would cause writing to the next register.
Fixes: f2a22e1e17 ("iio: adc: ad7606: Add support for software mode for ad7616")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250428-iio-adc-ad7606_spi-fix-write-value-mask-v1-1-a2d5e85a809f@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cdfbc0113 upstream.
Apply a mask to the raw value received over the SPI bus for unsigned
direct reads. As we found recently, SPI controllers may not set unused
bits to 0 when reading with bits_per_word != {8,16,32}. The ad7944 uses
bits_per_word of 14 and 18, so we need to mask the value to be sure we
returning the correct value to userspace during a direct read.
Fixes: d1efcf8871 ("iio: adc: ad7944: add driver for AD7944/AD7985/AD7986")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250505-iio-adc-ad7944-max-high-bits-on-direct-read-v1-1-b173facceefe@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2f8200142 upstream.
>From the documentation:
"offset to be added to <type>[Y]_raw prior toscaling by <type>[Y]_scale"
Offset should be applied before multiplying scale, so divide offset by
scale to make this correct.
Fixes: bc3eb0207f ("iio: imu: inv_icm42600: add temperature sensor support")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20250502-imu-v1-1-129b8391a4e3@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c78317b42 upstream.
Mark the temperature element signed, data read from the TEMP_OUT register
is in two's complement format.
This will avoid the temperature being mishandled and miss displayed.
Fixes: a3e0b51884 ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers")
Suggested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250505-fxls-v4-2-a38652e21738@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f62c49d8f3 ]
The conversion result registers differs between devices. Make sure the
mapping is correct by using a device dependent .get_raw() callback function.
Fixes: 732ad34260 ("iio: adc: mcp3911: add support for the whole MCP39xx family")
Co-developed-by: Lukas Rauber <lukas.rauber@janitza.de>
Signed-off-by: Lukas Rauber <lukas.rauber@janitza.de>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250428-mcp3911-fixes-v2-1-406e39330c3d@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8712e4986e ]
The sinc4 filter has a factor 0.23 between Output Data Rate and f_{3dB}
and for sinc3 the factor is 0.272 according to the data sheets for
ad7124-4 (Rev. E.) and ad7124-8 (Rev. F).
Fixes: cef2760954 ("iio: adc: ad7124: add 3db filter")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/20250317115247.3735016-6-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9016776f13 ]
This patch allows writing u64 values to the ADMV8818's high and low-pass
filter frequencies. It includes the following changes:
- Rejects negative frequencies in admv8818_write_raw.
- Adds a write_raw_get_fmt function to admv8818's iio_info, returning
IIO_VAL_INT_64 for the high and low-pass filter 3dB frequency channels.
Fixes: f34fe888ad ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Brian Pellegrino <bpellegrino@arka.org>
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/20250328174831.227202-7-sam.winchenbach@framepointer.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
