commit 734e99623c upstream.
find_or_create_cached_dir() could grab a new reference after kref_put()
had seen the refcount drop to zero but before cfid_list_lock is acquired
in smb2_close_cached_fid(), leading to use-after-free.
Switch to kref_put_lock() so cfid_release() is called with
cfid_list_lock held, closing that gap.
Fixes: ebe98f1447 ("cifs: enable caching of directories for which a lease is held")
Cc: stable@vger.kernel.org
Reported-by: Jay Shin <jaeshin@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4012abe8a7 upstream.
SMB2_change_notify called smb2_validate_iov() but ignored the return
code, then kmemdup()ed using server provided OutputBufferOffset/Length.
Check the return of smb2_validate_iov() and bail out on error.
Discovered with help from the ZeroPath security tooling.
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: stable@vger.kernel.org
Fixes: e3e9463414 ("smb3: improve SMB3 change notification support")
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2618849f31 upstream.
[BUG]
During development of a minor feature (make sure all btrfs_bio::end_io()
is called in task context), I noticed a crash in generic/388, where
metadata writes triggered new works after btrfs_stop_all_workers().
It turns out that it can even happen without any code modification, just
using RAID5 for metadata and the same workload from generic/388 is going
to trigger the use-after-free.
[CAUSE]
If btrfs hits an error, the fs is marked as error, no new
transaction is allowed thus metadata is in a frozen state.
But there are some metadata modifications before that error, and they are
still in the btree inode page cache.
Since there will be no real transaction commit, all those dirty folios
are just kept as is in the page cache, and they can not be invalidated
by invalidate_inode_pages2() call inside close_ctree(), because they are
dirty.
And finally after btrfs_stop_all_workers(), we call iput() on btree
inode, which triggers writeback of those dirty metadata.
And if the fs is using RAID56 metadata, this will trigger RMW and queue
new works into rmw_workers, which is already stopped, causing warning
from queue_work() and use-after-free.
[FIX]
Add a special handling for write_one_eb(), that if the fs is already in
an error state, immediately mark the bbio as failure, instead of really
submitting them.
Then during close_ctree(), iput() will just discard all those dirty
tree blocks without really writing them back, thus no more new jobs for
already stopped-and-freed workqueues.
The extra discard in write_one_eb() also acts as an extra safenet.
E.g. the transaction abort is triggered by some extent/free space
tree corruptions, and since extent/free space tree is already corrupted
some tree blocks may be allocated where they shouldn't be (overwriting
existing tree blocks). In that case writing them back will further
corrupting the fs.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 22c73d52a6 ]
The mds auth caps check should also validate the
fsname along with the associated caps. Not doing
so would result in applying the mds auth caps of
one fs on to the other fs in a multifs ceph cluster.
The bug causes multiple issues w.r.t user
authentication, following is one such example.
Steps to Reproduce (on vstart cluster):
1. Create two file systems in a cluster, say 'fsname1' and 'fsname2'
2. Authorize read only permission to the user 'client.usr' on fs 'fsname1'
$ceph fs authorize fsname1 client.usr / r
3. Authorize read and write permission to the same user 'client.usr' on fs 'fsname2'
$ceph fs authorize fsname2 client.usr / rw
4. Update the keyring
$ceph auth get client.usr >> ./keyring
With above permssions for the user 'client.usr', following is the
expectation.
a. The 'client.usr' should be able to only read the contents
and not allowed to create or delete files on file system 'fsname1'.
b. The 'client.usr' should be able to read/write on file system 'fsname2'.
But, with this bug, the 'client.usr' is allowed to read/write on file
system 'fsname1'. See below.
5. Mount the file system 'fsname1' with the user 'client.usr'
$sudo bin/mount.ceph usr@.fsname1=/ /kmnt_fsname1_usr/
6. Try creating a file on file system 'fsname1' with user 'client.usr'. This
should fail but passes with this bug.
$touch /kmnt_fsname1_usr/file1
7. Mount the file system 'fsname1' with the user 'client.admin' and create a
file.
$sudo bin/mount.ceph admin@.fsname1=/ /kmnt_fsname1_admin
$echo "data" > /kmnt_fsname1_admin/admin_file1
8. Try removing an existing file on file system 'fsname1' with the user
'client.usr'. This shoudn't succeed but succeeds with the bug.
$rm -f /kmnt_fsname1_usr/admin_file1
For more information, please take a look at the corresponding mds/fuse patch
and tests added by looking into the tracker mentioned below.
v2: Fix a possible null dereference in doutc
v3: Don't store fsname from mdsmap, validate against
ceph_mount_options's fsname and use it
v4: Code refactor, better warning message and
fix possible compiler warning
[ Slava.Dubeyko: "fsname check failed" -> "fsname mismatch" ]
Link: https://tracker.ceph.com/issues/72167
Signed-off-by: Kotresh HR <khiremat@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53db6f25ee ]
The wake_up_bit() is called in ceph_async_unlink_cb(),
wake_async_create_waiters(), and ceph_finish_async_create().
It makes sense to switch on clear_bit() function, because
it makes the code much cleaner and easier to understand.
More important rework is the adding of smp_mb__after_atomic()
memory barrier after the bit modification and before
wake_up_bit() call. It can prevent potential race condition
of accessing the modified bit in other threads. Luckily,
clear_and_wake_up_bit() already implements the required
functionality pattern:
static inline void clear_and_wake_up_bit(int bit, unsigned long *word)
{
clear_bit_unlock(bit, word);
/* See wake_up_bit() for which memory barrier you need to use. */
smp_mb__after_atomic();
wake_up_bit(word, bit);
}
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5824ccba9a ]
The Coverity Scan service has detected potential
race condition in ceph_ioctl_lazyio() [1].
The CID 1591046 contains explanation: "Check of thread-shared
field evades lock acquisition (LOCK_EVASION). Thread1 sets
fmode to a new value. Now the two threads have an inconsistent
view of fmode and updates to fields correlated with fmode
may be lost. The data guarded by this critical section may
be read while in an inconsistent state or modified by multiple
racing threads. In ceph_ioctl_lazyio: Checking the value of
a thread-shared field outside of a locked region to determine
if a locked operation involving that thread shared field
has completed. (CWE-543)".
The patch places fi->fmode field access under ci->i_ceph_lock
protection. Also, it introduces the is_file_already_lazy
variable that is set under the lock and it is checked later
out of scope of critical section.
[1] https://scan5.scan.coverity.com/#/project-view/64304/10063?selectedIssue=1591046
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7ed1e29cf ]
The Coverity Scan service has detected the calling of
wait_for_completion_killable() without checking the return
value in ceph_lock_wait_for_completion() [1]. The CID 1636232
defect contains explanation: "If the function returns an error
value, the error value may be mistaken for a normal value.
In ceph_lock_wait_for_completion(): Value returned from
a function is not checked for errors before being used. (CWE-252)".
The patch adds the checking of wait_for_completion_killable()
return value and return the error code from
ceph_lock_wait_for_completion().
[1] https://scan5.scan.coverity.com/#/project-view/64304/10063?selectedIssue=1636232
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86db0c32f1 ]
caches_show() overwrote its buffer on each iteration,
so only the last cache tag was visible in sysfs output.
Properly append with snprintf(buf + count, …).
Signed-off-by: Randall P. Embry <rpembry@gmail.com>
Message-ID: <20250926-v9fs_misc-v1-2-a8b3907fc04d@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32058c38d3 ]
The function call new_inode() is a primitive for allocating an inode in memory,
rather than planning disk space for it. Therefore, -ENOMEM should be returned
as the error code rather than -ENOSPC.
To be specific, new_inode()'s call path looks like this:
new_inode
new_inode_pseudo
alloc_inode
ops->alloc_inode (hpfs_alloc_inode)
alloc_inode_sb
kmem_cache_alloc_lru
Therefore, the failure of new_inode() indicates a memory presure issue (-ENOMEM),
not a lack of disk space. However, the current implementation of
hpfs_mkdir/create/mknod/symlink incorrectly returns -ENOSPC when new_inode() fails.
This patch fix this by set err to -ENOMEM before the goto statement.
BTW, we also noticed that other nested calls within these four functions,
like hpfs_alloc_f/dnode and hpfs_add_dirent, might also fail due to memory presure.
But similarly, only -ENOSPC is returned. Addressing these will involve code
modifications in other functions, and we plan to submit dedicated patches for these
issues in the future. For this patch, we focus on new_inode().
Signed-off-by: Yikang Yue <yikangy2@illinois.edu>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b1a4a59a2 ]
In btrfs_fallocate(), when the allocated range overlaps with a prealloc
extent and the extent starts after i_size, the range doesn't get marked
dirty in file_extent_tree. This results in persisting an incorrect
disk_i_size for the inode when not using the no-holes feature.
This is reproducible since commit 41a2ee75aa ("btrfs: introduce
per-inode file extent tree"), then became hidden since commit 3d7db6e8bd
("btrfs: don't allocate file extent tree for non regular files") and then
visible again after commit 8679d2687c ("btrfs: initialize
inode::file_extent_tree after i_mode has been set"), which fixes the
previous commit.
The following reproducer triggers the problem:
$ cat test.sh
MNT=/mnt/test
DEV=/dev/vdb
mkdir -p $MNT
mkfs.btrfs -f -O ^no-holes $DEV
mount $DEV $MNT
touch $MNT/file1
fallocate -n -o 1M -l 2M $MNT/file1
umount $MNT
mount $DEV $MNT
len=$((1 * 1024 * 1024))
fallocate -o 1M -l $len $MNT/file1
du --bytes $MNT/file1
umount $MNT
mount $DEV $MNT
du --bytes $MNT/file1
umount $MNT
Running the reproducer gives the following result:
$ ./test.sh
(...)
2097152 /mnt/test/file1
1048576 /mnt/test/file1
The difference is exactly 1048576 as we assigned.
Fix by adding a call to btrfs_inode_set_file_extent_range() in
btrfs_fallocate_update_isize().
Fixes: 41a2ee75aa ("btrfs: introduce per-inode file extent tree")
Signed-off-by: austinchang <austinchang@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f260c6aff0 ]
When btrfs_add_qgroup_relation() is called with invalid qgroup levels
(src >= dst), the function returns -EINVAL directly without freeing the
preallocated qgroup_list structure passed by the caller. This causes a
memory leak because the caller unconditionally sets the pointer to NULL
after the call, preventing any cleanup.
The issue occurs because the level validation check happens before the
mutex is acquired and before any error handling path that would free
the prealloc pointer. On this early return, the cleanup code at the
'out' label (which includes kfree(prealloc)) is never reached.
In btrfs_ioctl_qgroup_assign(), the code pattern is:
prealloc = kzalloc(sizeof(*prealloc), GFP_KERNEL);
ret = btrfs_add_qgroup_relation(trans, sa->src, sa->dst, prealloc);
prealloc = NULL; // Always set to NULL regardless of return value
...
kfree(prealloc); // This becomes kfree(NULL), does nothing
When the level check fails, 'prealloc' is never freed by either the
callee or the caller, resulting in a 64-byte memory leak per failed
operation. This can be triggered repeatedly by an unprivileged user
with access to a writable btrfs mount, potentially exhausting kernel
memory.
Fix this by freeing prealloc before the early return, ensuring prealloc
is always freed on all error paths.
Fixes: 4addc1ffd6 ("btrfs: qgroup: preallocate memory before adding a relation")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Shardul Bankar <shardulsb08@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00be6f26a2 ]
When io_uring is used in the same task as CIFS, there might be
unnecessary reconnects, causing issues in user-space applications
like QEMU with a log like:
> CIFS: VFS: \\10.10.100.81 Error -512 sending data on socket to server
Certain io_uring completions might be added to task_work with
notify_method being TWA_SIGNAL and thus TIF_NOTIFY_SIGNAL is set for
the task.
In __smb_send_rqst(), signals are masked before calling
smb_send_kvec(), but the masking does not apply to TIF_NOTIFY_SIGNAL.
If sk_stream_wait_memory() is reached via sock_sendmsg() while
TIF_NOTIFY_SIGNAL is set, signal_pending(current) will evaluate to
true there, and -EINTR will be propagated all the way from
sk_stream_wait_memory() to sock_sendmsg() in smb_send_kvec().
Afterwards, __smb_send_rqst() will see that not everything was written
and reconnect.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3677ca67b9 ]
we should use sock_create_kern() if the socket resides in kernel space.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 025e880759 ]
Willy Tarreau <w@1wt.eu> forwarded me a message from
Disclosure <disclosure@aisle.com> with the following
warning:
> The helper `xattr_key()` uses the pointer variable in the loop condition
> rather than dereferencing it. As `key` is incremented, it remains non-NULL
> (until it runs into unmapped memory), so the loop does not terminate on
> valid C strings and will walk memory indefinitely, consuming CPU or hanging
> the thread.
I easily reproduced this with setfattr and getfattr, causing a kernel
oops, hung user processes and corrupted orangefs files. Disclosure
sent along a diff (not a patch) with a suggested fix, which I based
this patch on.
After xattr_key started working right, xfstest generic/069 exposed an
xattr related memory leak that lead to OOM. xattr_key returns
a hashed key. When adding xattrs to the orangefs xattr cache, orangefs
used hash_add, a kernel hashing macro. hash_add also hashes the key using
hash_log which resulted in additions to the xattr cache going to the wrong
hash bucket. generic/069 tortures a single file and orangefs does a
getattr for the xattr "security.capability" every time. Orangefs
negative caches on xattrs which includes a kmalloc. Since adds to the
xattr cache were going to the wrong bucket, every getattr for
"security.capability" resulted in another kmalloc, none of which were
ever freed.
I changed the two uses of hash_add to hlist_add_head instead
and the memory leak ceased and generic/069 quit throwing furniture.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Reported-by: Stanislav Fort of Aisle Research <stanislav.fort@aisle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79c1587b6c ]
syzbot created an exfat image with cluster bits not set for the allocation
bitmap. exfat-fs reads and uses the allocation bitmap without checking
this. The problem is that if the start cluster of the allocation bitmap
is 6, cluster 6 can be allocated when creating a directory with mkdir.
exfat zeros out this cluster in exfat_mkdir, which can delete existing
entries. This can reallocate the allocated entries. In addition,
the allocation bitmap is also zeroed out, so cluster 6 can be reallocated.
This patch adds exfat_test_bitmap_range to validate that clusters used for
the allocation bitmap are correctly marked as in-use.
Reported-by: syzbot+a725ab460fc1def9896f@syzkaller.appspotmail.com
Tested-by: syzbot+a725ab460fc1def9896f@syzkaller.appspotmail.com
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dfba10838 ]
For exFAT filesystems with 4MB read_ahead_size, removing the storage device
when the read operation is in progress, which cause the last read syscall
spent 150s [1]. The main reason is that exFAT generates excessive log
messages [2].
After applying this patch, approximately 300,000 lines of log messages
were suppressed, and the delay of the last read() syscall was reduced
to about 4 seconds.
[1]:
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000120>
read(4, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000032>
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 131072 <0.000119>
read(4, 0x7fccf28ae000, 131072) = -1 EIO (Input/output error) <150.186215>
[2]:
[ 333.696603] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
[ 333.697378] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
[ 333.698156] exFAT-fs (vdb): error, failed to access to FAT (entry 0x0000d780, err:-5)
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46e75c56df ]
The following code paths may result in high latency or even task hangs:
1. fastcommit io is throttled by wbt.
2. jbd2_fc_wait_bufs() might wait for a long time while
JBD2_FAST_COMMIT_ONGOING is set in journal->flags, and then
jbd2_journal_commit_transaction() waits for the
JBD2_FAST_COMMIT_ONGOING bit for a long time while holding the write
lock of j_state_lock.
3. start_this_handle() waits for read lock of j_state_lock which
results in high latency or task hang.
Given the fact that ext4_fc_commit() already modifies the current
process' IO priority to match that of the jbd2 thread, it should be
reasonable to match jbd2's IO submission flags as well.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250827121812.1477634-1-sunjunchao@bytedance.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1534f72dc2 ]
The parent function ext4_xattr_inode_lookup_create already uses GFP_NOFS for memory alloction, so the function ext4_xattr_inode_cache_find should use same gfp_flag.
Signed-off-by: chuguangqing <chuguangqing@inspur.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a890a2e339 ]
Theoretically it's an oopsable race, but I don't believe one can manage
to hit it on real hardware; might become doable on a KVM, but it still
won't be easy to attack.
Anyway, it's easy to deal with - since xdr_encode_hyper() is just a call of
put_unaligned_be64(), we can put that under ->d_lock and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf75ad0968 ]
When client initialization goes through server trunking discovery, it
schedules the state manager and then sleeps waiting for nfs_client
initialization completion.
The state manager can fail during state recovery, and specifically in
lease establishment as nfs41_init_clientid() will bail out in case of
errors returned from nfs4_proc_create_session(), without ever marking
the client ready. The session creation can fail for a variety of reasons
e.g. during backchannel parameter negotiation, with status -EINVAL.
The error status will propagate all the way to the nfs4_state_manager
but the client status will not be marked, and thus the mount process
will remain blocked waiting.
Fix it by adding -EINVAL error handling to nfs4_state_manager().
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be390f9524 ]
RFC7530 states that clients should be prepared for the return of
NFS4ERR_GRACE errors for non-reclaim lock and I/O requests.
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 300b072df7 ]
The transaction manager initialization in txInit() was not properly
initializing TxBlock[0].waitor waitqueue, causing a crash when
txEnd(0) is called on read-only filesystems.
When a filesystem is mounted read-only, txBegin() returns tid=0 to
indicate no transaction. However, txEnd(0) still gets called and
tries to access TxBlock[0].waitor via tid_to_tblock(0), but this
waitqueue was never initialized because the initialization loop
started at index 1 instead of 0.
This causes a 'non-static key' lockdep warning and system crash:
INFO: trying to register non-static key in txEnd
Fix by ensuring all transaction blocks including TxBlock[0] have
their waitqueues properly initialized during txInit().
Reported-by: syzbot+c4f3462d8b2ad7977bea@syzkaller.appspotmail.com
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a5aa54fba ]
The inode mode loaded from corrupted disk can be invalid. Do like what
commit 0a9e740513 ("isofs: Verify inode mode when loading from disk")
does.
Reported-by: syzbot <syzbot+895c23f6917da440ed0d@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=895c23f6917da440ed0d
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23361bd549 ]
When we get wrong extent info data, and look up extent_node in rb tree,
it will cause infinite loop (CONFIG_F2FS_CHECK_FS=n). Avoiding this by
return NULL and print some kernel messages in that case.
Signed-off-by: wangzijie <wangzijie1@honor.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe91e078b6 ]
... allowing any ->lookup() return value to be passed to it.
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e8011ffec ]
Since commit af153bb63a ("vfs: catch invalid modes in may_open()")
requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/
S_IFIFO/S_IFSOCK type, use S_IFREG for $Extend records.
Reported-by: syzbot <syzbot+895c23f6917da440ed0d@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=895c23f6917da440ed0d
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a33be64b98 ]
This patch fixes to support different block size.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ca1b31118 ]
This is slightly tricky, since the VFS uses non-zeroing allocation to
preserve some fields that are left in a consistent state.
Reported-by: Chunsheng Luo <luochunsheng@ustc.edu>
Closes: https://lore.kernel.org/all/20250818083224.229-1-luochunsheng@ustc.edu/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fc6056dcf ]
As reported, on-disk footer.ino and footer.nid is the same and
out-of-range, let's add sanity check on f2fs_alloc_nid() to detect
any potential corruption in free_nid_list.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5c76f9961c upstream.
When smb2_query_info_compound() retries, a previously allocated cfid may
have been freed in the first attempt.
Because cfid wasn't reset on replay, later cleanup could act on a stale
pointer, leading to a potential use-after-free.
Reinitialize cfid to NULL under the replay label.
Example trace (trimmed):
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 11224 at ../lib/refcount.c:28 refcount_warn_saturate+0x9c/0x110
[...]
RIP: 0010:refcount_warn_saturate+0x9c/0x110
[...]
Call Trace:
<TASK>
smb2_query_info_compound+0x29c/0x5c0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
? step_into+0x10d/0x690
? __legitimize_path+0x28/0x60
smb2_queryfs+0x6a/0xf0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
smb311_queryfs+0x12d/0x140 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
? kmem_cache_alloc+0x18a/0x340
? getname_flags+0x46/0x1e0
cifs_statfs+0x9f/0x2b0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
statfs_by_dentry+0x67/0x90
vfs_statfs+0x16/0xd0
user_statfs+0x54/0xa0
__do_sys_statfs+0x20/0x50
do_syscall_64+0x58/0x80
Cc: stable@kernel.org
Fixes: 4f1fffa237 ("cifs: commands that are retried should have replay flag set")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Acked-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit abb1f08a21 upstream.
When tracing is enabled, the trace_nfsd_read_done trace point
crashes during the pynfs read.testNoFh test.
Fixes: 15a8b55dbb ("nfsd: call op_release, even when op_func returns an error")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e92c294120 upstream.
The parentheses for the unlikely() annotation were put in the wrong
place so it means that the condition is basically never true and the
bounds checking is skipped.
Fixes: aab9458b9f ("btrfs: tree-checker: add inode extref checks")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 48ea8b2004 ]
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2746!
CPU: 0 UID: 0 PID: 5323 Comm: syz.0.0 Not tainted 6.13.0-rc2-syzkaller-00018-g7cb1b4663150 #0
RIP: 0010:get_new_segment fs/f2fs/segment.c:2746 [inline]
RIP: 0010:new_curseg+0x1f52/0x1f70 fs/f2fs/segment.c:2876
Call Trace:
<TASK>
__allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3210
f2fs_allocate_new_section fs/f2fs/segment.c:3224 [inline]
f2fs_allocate_pinning_section+0xfa/0x4e0 fs/f2fs/segment.c:3238
f2fs_expand_inode_data+0x696/0xca0 fs/f2fs/file.c:1830
f2fs_fallocate+0x537/0xa10 fs/f2fs/file.c:1940
vfs_fallocate+0x569/0x6e0 fs/open.c:327
do_vfs_ioctl+0x258c/0x2e40 fs/ioctl.c:885
__do_sys_ioctl fs/ioctl.c:904 [inline]
__se_sys_ioctl+0x80/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Concurrent pinfile allocation may run out of free section, result in
panic in get_new_segment(), let's expand pin_sem lock coverage to
include f2fs_gc(), so that we can make sure to reclaim enough free
space for following allocation.
In addition, do below changes to enhance error path handling:
- call f2fs_bug_on() only in non-pinfile allocation path in
get_new_segment().
- call reset_curseg_fields() to reset all fields of curseg in
new_curseg()
Fixes: f5a53edcf0 ("f2fs: support aligned pinned file")
Reported-by: syzbot+15669ec8c35ddf6c3d43@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/675cd64e.050a0220.37aaf.00bb.GAE@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Rajani Kantha <681739313@139.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 45c222468d ]
After setting the BTRFS_ROOT_FORCE_COW flag on the root we are doing a
full write barrier, smp_wmb(), but we don't need to, all we need is a
smp_mb__after_atomic(). The use of the smp_wmb() is from the old days
when we didn't use a bit and used instead an int field in the root to
signal if cow is forced. After the int field was changed to a bit in
the root's state (flags field), we forgot to update the memory barrier
in create_pending_snapshot() to smp_mb__after_atomic(), but we did the
change in commit_fs_roots() after clearing BTRFS_ROOT_FORCE_COW. That
happened in commit 27cdeb7096 ("Btrfs: use bitfield instead of integer
data type for the some variants in btrfs_root"). On the reader side, in
should_cow_block(), we also use the counterpart smp_mb__before_atomic()
which generates further confusion.
So change the smp_wmb() to smp_mb__after_atomic(). In fact we don't
even need any barrier at all since create_pending_snapshot() is called
in the critical section of a transaction commit and therefore no one
can concurrently join/attach the transaction, or start a new one, until
the transaction is unblocked. By the time someone starts a new transaction
and enters should_cow_block(), a lot of implicit memory barriers already
took place by having acquired several locks such as fs_info->trans_lock
and extent buffer locks on the root node at least. Nevertlheless, for
consistency use smp_mb__after_atomic() after setting the force cow bit
in create_pending_snapshot().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aab9458b9f ]
Like inode refs, inode extrefs have a variable length name, which means
we have to do a proper check to make sure no header nor name can exceed
the item limits.
The check itself is very similar to check_inode_ref(), just a different
structure (btrfs_inode_extref vs btrfs_inode_ref).
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a0565cad3 ]
If we fail to update the inode at link_to_fixup_dir(), we don't abort the
transaction and propagate the error up the call chain, which makes it hard
to pinpoint the error to the inode update. So abort the transaction if the
inode update call fails, so that if it happens we known immediately.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cb7f0b8c9 ]
We already have the extent buffer's level in an argument, there's no need
to first ensure the extent buffer's data is loaded (by calling
btrfs_read_extent_buffer()) and then call btrfs_header_level() to check
the level. So use the level argument and do the check before calling
btrfs_read_extent_buffer().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f5b8095ea ]
Currently we have this odd behaviour:
1) At btrfs_replay_log() we drop the reference of the log root tree if
the call to btrfs_recover_log_trees() failed;
2) But if the call to btrfs_recover_log_trees() did not fail, we don't
drop the reference in btrfs_replay_log() - we expect that
btrfs_recover_log_trees() does it in case it returns success.
Let's simplify this and make btrfs_replay_log() always drop the reference
on the log root tree, not only this simplifies code as it's what makes
sense since it's btrfs_replay_log() who grabbed the reference in the first
place.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7f3dfb829 ]
Replace max_t() followed by min_t() with a single clamp().
As was pointed by David Laight in
https://lore.kernel.org/linux-btrfs/20250906122458.75dfc8f0@pumpkin/
the calculation may overflow u32 when the input value is too large, so
clamp_t() is not used. In practice the expected values are in range of
megabytes to gigabytes (throughput limit) so the bug would not happen.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: David Sterba <dsterba@suse.com>
[ Use clamp() and add explanation. ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d703963d2 ]
The hint block group selection in the extent allocator is wrong in the
first place, as it can select the dedicated data relocation block group for
the normal data allocation.
Since we separated the normal data space_info and the data relocation
space_info, we can easily identify a block group is for data relocation or
not. Do not choose it for the normal data allocation.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c44cd3c79 ]
Now that btrfs_zone_finish_endio_workfn() is directly calling
do_zone_finish() the only caller of btrfs_zone_finish_endio() is
btrfs_finish_one_ordered().
btrfs_finish_one_ordered() already has error handling in-place so
btrfs_zone_finish_endio() can return an error if the block group lookup
fails.
Also as btrfs_zone_finish_endio() already checks for zoned filesystems and
returns early, there's no need to do this in the caller.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6dd405b66 ]
In the process_one_buffer() log tree walk callback we return errors to the
log tree walk caller and then the caller aborts the transaction, if we
have one, or turns the fs into error state if we don't have one. While
this reduces code it makes it harder to figure out where exactly an error
came from. So add the transaction aborts after every failure inside the
process_one_buffer() callback, so that it helps figuring out why failures
happen.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ebd726b10 ]
We do several things while walking a log tree (for replaying and for
freeing a log tree) like reading extent buffers and cleaning them up,
but we don't immediately abort the transaction, or turn the fs into an
error state, when one of these things fails. Instead we the transaction
abort or turn the fs into error state in the caller of the entry point
function that walks a log tree - walk_log_tree() - which means we don't
get to know exactly where an error came from.
Improve on this by doing a transaction abort / turn fs into error state
after each such failure so that when it happens we have a better
understanding where the failure comes from. This deliberately leaves
the transaction abort / turn fs into error state in the callers of
walk_log_tree() as to ensure we don't get into an inconsistent state in
case we forget to do it deeper in call chain. It also deliberately does
not do it after errors from the calls to the callback defined in
struct walk_control::process_func(), as we will do it later on another
patch.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6f40e50ceb upstream.
handle_response() dereferences the payload as a 4-byte handle without
verifying that the declared payload size is at least 4 bytes. A malformed
or truncated message from ksmbd.mountd can lead to a 4-byte read past the
declared payload size. Validate the size before dereferencing.
This is a minimal fix to guard the initial handle read.
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Reported-by: Qianchang Zhao <pioooooooooip@gmail.com>
Signed-off-by: Qianchang Zhao <pioooooooooip@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 630785bfbe ]
The deprecation of the 'attr2' mount option in 6.18 wasn't entirely
successful because nobody noticed that the kernel never printed a
warning about attr2 being set in fstab if the only xfs filesystem is the
root fs; the initramfs mounts the root fs with no mount options; and the
init scripts only conveyed the fstab options by remounting the root fs.
Fix this by making it complain all the time.
Cc: stable@vger.kernel.org # v5.13
Fixes: 92cf7d3638 ("xfs: Skip repetitive warnings about mount options")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
[ Update existing xfs_fs_warn_deprecated() callers ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78a63493f8 upstream.
The extent map cache can become stale when extents are moved or
defragmented, causing subsequent operations to see outdated extent flags.
This triggers a BUG_ON in ocfs2_refcount_cal_cow_clusters().
The problem occurs when:
1. copy_file_range() creates a reflinked extent with OCFS2_EXT_REFCOUNTED
2. ioctl(FITRIM) triggers ocfs2_move_extents()
3. __ocfs2_move_extents_range() reads and caches the extent (flags=0x2)
4. ocfs2_move_extent()/ocfs2_defrag_extent() calls __ocfs2_move_extent()
which clears OCFS2_EXT_REFCOUNTED flag on disk (flags=0x0)
5. The extent map cache is not invalidated after the move
6. Later write() operations read stale cached flags (0x2) but disk has
updated flags (0x0), causing a mismatch
7. BUG_ON(!(rec->e_flags & OCFS2_EXT_REFCOUNTED)) triggers
Fix by clearing the extent map cache after each extent move/defrag
operation in __ocfs2_move_extents_range(). This ensures subsequent
operations read fresh extent data from disk.
Link: https://lore.kernel.org/all/20251009142917.517229-1-kartikey406@gmail.com/T/
Link: https://lkml.kernel.org/r/20251009154903.522339-1-kartikey406@gmail.com
Fixes: 53069d4e76 ("Ocfs2/move_extents: move/defrag extents within a certain range.")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reported-by: syzbot+6fdd8fa3380730a4b22c@syzkaller.appspotmail.com
Tested-by: syzbot+6fdd8fa3380730a4b22c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=2959889e1f6e216585ce522f7e8bc002b46ad9e7
Reviewed-by: Mark Fasheh <mark@fasheh.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b2ff4873a upstream.
Fix TCP_Server_Info::credits to be signed, just as echo_credits and
oplock_credits are. This also fixes what ought to get at least a
compilation warning if not an outright error in *get_credits_field() as a
pointer to the unsigned server->credits field is passed back as a pointer
to a signed int.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Acked-by: Pavel Shilovskiy <pshilovskiy@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f477af0cfa upstream.
On a filesystem with parent pointers, xchk_nlinks_collect_dir walks both
the directory entries (data fork) and the parent pointers (attr fork) to
determine the correct link count. Unfortunately I forgot to update the
lock mode logic to handle the case of a directory whose attr fork is in
btree format and has not yet been loaded *and* whose data fork doesn't
need loading.
This leads to a bunch of assertions from xfs/286 in xfs_iread_extents
because we only took ILOCK_SHARED, not ILOCK_EXCL. You'd need the rare
happenstance of a directory with a large number of non-pptr extended
attributes set and enough memory pressure to cause the directory to be
evicted and partially reloaded from disk.
I /think/ this only started in 6.18-rc1 because I've started seeing OOM
errors with the maple tree slab using 70% of memory, and this didn't
happen in 6.17. Yay dynamic systems!
Cc: stable@vger.kernel.org # v6.10
Fixes: 77ede5f44b ("xfs: walk directory parent pointers to determine backref count")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
