commit d34caa89a1 upstream.
ufshcd_link_startup() has a facility (link_startup_again) to issue
DME_LINKSTARTUP a 2nd time even though the 1st time was successful.
Some older hardware benefits from that, however the behaviour is
non-standard, and has been found to cause link startup to be unreliable
for some Intel Alder Lake based host controllers.
Add UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE to suppress
link_startup_again, in preparation for setting the quirk for affected
controllers.
Fixes: 7dc9fb47bc ("scsi: ufs: ufs-pci: Add support for Intel ADL")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251024085918.31825-3-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d59fba493 upstream.
In the parse_adv_monitor_pattern() function, the value of
the 'length' variable is currently limited to HCI_MAX_EXT_AD_LENGTH(251).
The size of the 'value' array in the mgmt_adv_pattern structure is 31.
If the value of 'pattern[i].length' is set in the user space
and exceeds 31, the 'patterns[i].value' array can be accessed
out of bound when copied.
Increasing the size of the 'value' array in
the 'mgmt_adv_pattern' structure will break the userspace.
Considering this, and to avoid OOB access revert the limits for 'offset'
and 'length' back to the value of HCI_MAX_AD_LENGTH.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: db08722fc7 ("Bluetooth: hci_core: Fix missing instances using HCI_MAX_AD_LENGTH")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 558ae45798 ]
When a UTP error occurs in isolation, UFS is not currently recoverable.
This is because the UTP error is not considered fatal in the error
handling code, leading to either an I/O timeout or an OCS error.
Add the UTP error flag to INT_FATAL_ERRORS so the controller will be
reset in this situation.
sd 0:0:0:0: [sda] tag#38 UNKNOWN(0x2003) Result: hostbyte=0x07
driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#38 CDB: opcode=0x28 28 00 00 51 24 e2 00 00 08 00
I/O error, dev sda, sector 42542864 op 0x0:(READ) flags 0x80700 phys_seg
8 prio class 2
OCS error from controller = 9 for tag 39
pa_err[1] = 0x80000010 at 2667224756 us
pa_err: total cnt=2
dl_err[0] = 0x80000002 at 2667148060 us
dl_err[1] = 0x80002000 at 2667282844 us
No record of nl_err
No record of tl_err
No record of dme_err
No record of auto_hibern8_err
fatal_err[0] = 0x804 at 2667282836 us
---------------------------------------------------
REGISTER
---------------------------------------------------
NAME OFFSET VALUE
STD HCI SFR 0xfffffff0 0x0
AHIT 0x18 0x814
INTERRUPT STATUS 0x20 0x1000
INTERRUPT ENABLE 0x24 0x70ef5
[mkp: commit desc]
Signed-off-by: Hoyoung Seo <hy50.seo@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Message-Id: <20250930061428.617955-1-hy50.seo@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb1f456834 ]
Some Kioxia UFS 4 devices do not support the qTimestamp attribute. Set
the UFS_DEVICE_QUIRK_NO_TIMESTAMP_SUPPORT for these devices such that no
error messages appear in the kernel log about failures to set the
qTimestamp attribute.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Tested-by: Nitin Rawat <quic_nitirawa@quicinc.com> # on SM8650-QRD
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Message-ID: <20250909190614.3531435-1-bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66048f8b3c ]
During recent testing with the netem qdisc to inject delays into TCP
traffic, we observed that our CLS BPF program failed to function correctly
due to incorrect classid retrieval from task_get_classid(). The issue
manifests in the following call stack:
bpf_get_cgroup_classid+5
cls_bpf_classify+507
__tcf_classify+90
tcf_classify+217
__dev_queue_xmit+798
bond_dev_queue_xmit+43
__bond_start_xmit+211
bond_start_xmit+70
dev_hard_start_xmit+142
sch_direct_xmit+161
__qdisc_run+102 <<<<< Issue location
__dev_xmit_skb+1015
__dev_queue_xmit+637
neigh_hh_output+159
ip_finish_output2+461
__ip_finish_output+183
ip_finish_output+41
ip_output+120
ip_local_out+94
__ip_queue_xmit+394
ip_queue_xmit+21
__tcp_transmit_skb+2169
tcp_write_xmit+959
__tcp_push_pending_frames+55
tcp_push+264
tcp_sendmsg_locked+661
tcp_sendmsg+45
inet_sendmsg+67
sock_sendmsg+98
sock_write_iter+147
vfs_write+786
ksys_write+181
__x64_sys_write+25
do_syscall_64+56
entry_SYSCALL_64_after_hwframe+100
The problem occurs when multiple tasks share a single qdisc. In such cases,
__qdisc_run() may transmit skbs created by different tasks. Consequently,
task_get_classid() retrieves an incorrect classid since it references the
current task's context rather than the skb's originating task.
Given that dev_queue_xmit() always executes with bh disabled, we can use
softirq_count() instead to obtain the correct classid.
The simple steps to reproduce this issue:
1. Add network delay to the network interface:
such as: tc qdisc add dev bond0 root netem delay 1.5ms
2. Build two distinct net_cls cgroups, each with a network-intensive task
3. Initiate parallel TCP streams from both tasks to external servers.
Under this specific condition, the issue reliably occurs. The kernel
eventually dequeues an SKB that originated from Task-A while executing in
the context of Task-B.
It is worth noting that it will change the established behavior for a
slightly different scenario:
<sock S is created by task A>
<class ID for task A is changed>
<skb is created by sock S xmit and classified>
prior to this patch the skb will be classified with the 'new' task A
classid, now with the old/original one. The bpf_get_cgroup_classid_curr()
function is a more appropriate choice for this case.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250902062933.30087-1-laoar.shao@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faac32d4ec ]
Improve the recovery process for hibernation exit failures. Trigger the
error handler and break the suspend operation to ensure effective
recovery from hibernation errors. Activate the error handling mechanism
by ufshcd_force_error_recovery and scheduling the error handler work.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21f82062d0 ]
An exchange with a NFC target must complete within NCI_DATA_TIMEOUT.
A delay of 700 ms is not sufficient for cryptographic operations on smart
cards. CardOS 6.0 may need up to 1.3 seconds to perform 256-bit ECDH
or 3072-bit RSA. To prevent brute-force attacks, passports and similar
documents introduce even longer delays into access control protocols
(BAC/PACE).
The timeout should be higher, but not too much. The expiration allows
us to detect that a NFC target has disappeared.
Signed-off-by: Juraj Šarinay <juraj@sarinay.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250902113630.62393-1-juraj@sarinay.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9a3e99294 ]
This patch modifies the type of setup_xref from void to int and handles
errors since the function can fail.
`setup_xref` now returns the (eventual) error from
`dmae_set_dmars`|`dmae_set_chcr`, while `shdma_tx_submit` handles the
result, removing the chunks from the queue and marking PM as idle in
case of an error.
Signed-off-by: Thomas Andreatta <thomas.andreatta2000@gmail.com>
Link: https://lore.kernel.org/r/20250827152442.90962-1-thomas.andreatta2000@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fc6056dcf ]
As reported, on-disk footer.ino and footer.nid is the same and
out-of-range, let's add sanity check on f2fs_alloc_nid() to detect
any potential corruption in free_nid_list.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f12d1137c ]
It is possible for bpf_xdp_adjust_tail() to free all fragments. The
kfunc currently clears the XDP_FLAGS_HAS_FRAGS bit, but not
XDP_FLAGS_FRAGS_PF_MEMALLOC. So far, this has not caused a issue when
building sk_buff from xdp_buff since all readers of xdp_buff->flags
use the flag only when there are fragments. Clear the
XDP_FLAGS_FRAGS_PF_MEMALLOC bit as well to make the flags correct.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250922233356.3356453-2-ameryhung@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c89513395 ]
The bpf_cgroup_from_id kfunc relies on cgroup_get_from_id to obtain the
cgroup corresponding to a given cgroup ID. This helper can be called in
a lot of contexts where the current thread can be random. A recent
example was its use in sched_ext's ops.tick(), to obtain the root cgroup
pointer. Since the current task can be whatever random user space task
preempted by the timer tick, this makes the behavior of the helper
unreliable.
Refactor out __cgroup_get_from_id as the non-namespace aware version of
cgroup_get_from_id, and change bpf_cgroup_from_id to make use of it.
There is no compatibility breakage here, since changing the namespace
against which the lookup is being done to the root cgroup namespace only
permits a wider set of lookups to succeed now. The cgroup IDs across
namespaces are globally unique, and thus don't need to be retranslated.
Reported-by: Dan Schatzberg <dschatzberg@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250915032618.1551762-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f41345f47f ]
In the following toy program (reg states minimized for readability), R0
and R1 always have different values at instruction 6. This is obvious
when reading the program but cannot be guessed from ranges alone as
they overlap (R0 in [0; 0xc0000000], R1 in [1024; 0xc0000400]).
0: call bpf_get_prandom_u32#7 ; R0_w=scalar()
1: w0 = w0 ; R0_w=scalar(var_off=(0x0; 0xffffffff))
2: r0 >>= 30 ; R0_w=scalar(var_off=(0x0; 0x3))
3: r0 <<= 30 ; R0_w=scalar(var_off=(0x0; 0xc0000000))
4: r1 = r0 ; R1_w=scalar(var_off=(0x0; 0xc0000000))
5: r1 += 1024 ; R1_w=scalar(var_off=(0x400; 0xc0000000))
6: if r1 != r0 goto pc+1
Looking at tnums however, we can deduce that R1 is always different from
R0 because their tnums don't agree on known bits. This patch uses this
logic to improve is_scalar_branch_taken in case of BPF_JEQ and BPF_JNE.
This change has a tiny impact on complexity, which was measured with
the Cilium complexity CI test. That test covers 72 programs with
various build and load time configurations for a total of 970 test
cases. For 80% of test cases, the patch has no impact. On the other
test cases, the patch decreases complexity by only 0.08% on average. In
the best case, the verifier needs to walk 3% less instructions and, in
the worst case, 1.5% more. Overall, the patch has a small positive
impact, especially for our largest programs.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/be3ee70b6e489c49881cb1646114b1d861b5c334.1755694147.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2caa6b88e0 ]
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250811-restricted-pointers-bpf-v1-1-a1d7cc3cb9e7@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f93126f5d5 ]
When writing to a drm_sched_entity's run-queue, writers are protected
through the lock drm_sched_entity.rq_lock. This naming, however,
frequently collides with the separate internal lock of struct
drm_sched_rq, resulting in uses like this:
spin_lock(&entity->rq_lock);
spin_lock(&entity->rq->lock);
Rename drm_sched_entity.rq_lock to improve readability. While at it,
re-order that struct's members to make it more obvious what the lock
protects.
v2:
* Rename some rq_lock straddlers in kerneldoc, improve commit text. (Philipp)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
[pstanner: Fix typo in docstring]
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016122013.7857-5-tursulin@igalia.com
Stable-dep-of: d25e3a610b ("drm/sched: Fix race in drm_sched_entity_select_rq()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d42a254633 ]
In FIFO mode (which is the default), both drm_sched_entity_push_job() and
drm_sched_rq_update_fifo(), where the latter calls the former, are
currently taking and releasing the same entity->rq_lock.
We can avoid that design inelegance, and also have a miniscule
efficiency improvement on the submit from idle path, by introducing a new
drm_sched_rq_update_fifo_locked() helper and pulling up the lock taking to
its callers.
v2:
* Remove drm_sched_rq_update_fifo() altogether. (Christian)
v3:
* Improved commit message. (Philipp)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016122013.7857-2-tursulin@igalia.com
Stable-dep-of: d25e3a610b ("drm/sched: Fix race in drm_sched_entity_select_rq()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19de03b312 upstream.
A REQ_OP_OPEN_ZONE request changes the condition of a sequential zone of
a zoned block device to the explicitly open condition
(BLK_ZONE_COND_EXP_OPEN). As such, it should be considered a write
operation.
Change this operation code to be an odd number to reflect this. The
following operation numbers are changed to keep the numbering compact.
No problems were reported without this change as this operation has no
data. However, this unifies the zone operation to reflect that they
modify the device state and also allows strengthening checks in the
block layer, e.g. checking if this operation is not issued against a
read-only device.
Fixes: 6c1b1da58f ("block: add zone open, close and finish operations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12a1c9353c upstream.
REQ_OP_ZONE_RESET_ALL is a zone management request. Fix
op_is_zone_mgmt() to return true for that operation, like it already
does for REQ_OP_ZONE_RESET.
While no problems were reported without this fix, this change allows
strengthening checks in various block device drivers (scsi sd,
virtioblk, DM) where op_is_zone_mgmt() is used to verify that a zone
management command is not being issued to a regular block device.
Fixes: 6c1b1da58f ("block: add zone open, close and finish operations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 751463ceef ]
Periodic advertising enabled flag cannot be tracked by the enabled
flag since advertising and periodic advertising each can be
enabled/disabled separately from one another causing the states to be
inconsistent when for example an advertising set is disabled its
enabled flag is set to false which is then used for periodic which has
not being disabled.
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d92808024 ]
This fixes the state tracking of advertisement set/instance 0x00 which
is considered a legacy instance and is not tracked individually by
adv_instances list, previously it was assumed that hci_dev itself would
track it via HCI_LE_ADV but that is a global state not specifc to
instance 0x00, so to fix it a new flag is introduced that only tracks the
state of instance 0x00.
Fixes: 1488af7b8b ("Bluetooth: hci_sync: Fix hci_resume_advertising_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83d328a72e ]
Currently, hci_conn_hash_lookup_big only checks for BIS master connections,
by filtering out connections with the destination address set. This commit
updates this function to also consider BIS slave connections, since it is
also used for a Broadcast Receiver to set an available BIG handle before
issuing the LE BIG Create Sync command.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: f0c200a4a5 ("Bluetooth: ISO: Fix BIS connection dst_type handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a76ab5731e ]
Private stack will be allocated with percpu allocator in jit time.
To avoid complexity at runtime, only one copy of private stack is
available per cpu per prog. So runtime recursion check is necessary
to avoid stack corruption.
Current private stack only supports kprobe/perf_event/tp/raw_tp
which has recursion check in the kernel, and prog types that use
bpf trampoline recursion check. For trampoline related prog types,
currently only tracing progs have recursion checking.
To avoid complexity, all async_cb subprogs use normal kernel stack
including those subprogs used by both main prog subtree and async_cb
subtree. Any prog having tail call also uses kernel stack.
To avoid jit penalty with private stack support, a subprog stack
size threshold is set such that only if the stack size is no less
than the threshold, private stack is supported. The current threshold
is 64 bytes. This avoids jit penality if the stack usage is small.
A useless 'continue' is also removed from a loop in func
check_max_stack_depth().
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112163907.2223839-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 881a9c9cb7 ("bpf: Do not audit capability check in do_jit()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a1f3058930 upstream.
Recently, we discovered the following issue through syzkaller:
BUG: KASAN: slab-use-after-free in fb_mode_is_equal+0x285/0x2f0
Read of size 4 at addr ff11000001b3c69c by task syz.xxx
...
Call Trace:
<TASK>
dump_stack_lvl+0xab/0xe0
print_address_description.constprop.0+0x2c/0x390
print_report+0xb9/0x280
kasan_report+0xb8/0xf0
fb_mode_is_equal+0x285/0x2f0
fbcon_mode_deleted+0x129/0x180
fb_set_var+0xe7f/0x11d0
do_fb_ioctl+0x6a0/0x750
fb_ioctl+0xe0/0x140
__x64_sys_ioctl+0x193/0x210
do_syscall_64+0x5f/0x9c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Based on experimentation and analysis, during framebuffer unregistration,
only the memory of fb_info->modelist is freed, without setting the
corresponding fb_display[i]->mode to NULL for the freed modes. This leads
to UAF issues during subsequent accesses. Here's an example of reproduction
steps:
1. With /dev/fb0 already registered in the system, load a kernel module
to register a new device /dev/fb1;
2. Set fb1's mode to the global fb_display[] array (via FBIOPUT_CON2FBMAP);
3. Switch console from fb to VGA (to allow normal rmmod of the ko);
4. Unload the kernel module, at this point fb1's modelist is freed, leaving
a wild pointer in fb_display[];
5. Trigger the bug via system calls through fb0 attempting to delete a mode
from fb0.
Add a check in do_unregister_framebuffer(): if the mode to be freed exists
in fb_display[], set the corresponding mode pointer to NULL.
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 00aaae60fa ]
There are GPIO controllers such as the one present in the LX2160ARDB
QIXIS FPGA which have fixed-direction input and output GPIO lines mixed
together in a single register. This cannot be modeled using the
gpio-regmap as-is since there is no way to present the true direction of
a GPIO line.
In order to make this use case possible, add a new configuration
parameter - fixed_direction_output - into the gpio_regmap_config
structure. This will enable user drivers to provide a bitmap that
represents the fixed direction of the GPIO lines.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: 2ba5772e53 ("gpio: idio-16: Define fixed direction of the GPIO lines")
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 553b75d4bf ]
GPIO controller often have support for IRQ: allow to easily allocate
both gpio-regmap and regmap-irq in one operation.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-5-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 2ba5772e53 ("gpio: idio-16: Define fixed direction of the GPIO lines")
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 19408200c0 ]
Add GENMASK_TYPE() which generalizes __GENMASK() to support different
types, and implement fixed-types versions of GENMASK() based on it.
The fixed-type version allows more strict checks to the min/max values
accepted, which is useful for defining registers like implemented by
i915 and xe drivers with their REG_GENMASK*() macros.
The strict checks rely on shift-count-overflow compiler check to fail
the build if a number outside of the range allowed is passed.
Example:
#define FOO_MASK GENMASK_U32(33, 4)
will generate a warning like:
include/linux/bits.h:51:27: error: right shift count >= width of type [-Werror=shift-count-overflow]
51 | type_max(t) >> (BITS_PER_TYPE(t) - 1 - (h)))))
| ^~
The result is casted to the corresponding fixed width type. For
example, GENMASK_U8() returns an u8. Note that because of the C
promotion rules, GENMASK_U8() and GENMASK_U16() will immediately be
promoted to int if used in an expression. Regardless, the main goal is
not to get the correct type, but rather to enforce more checks at
compile time.
While GENMASK_TYPE() is crafted to cover all variants, including the
already existing GENMASK(), GENMASK_ULL() and GENMASK_U128(), for the
moment, only use it for the newly introduced GENMASK_U*(). The
consolidation will be done in a separate change.
Co-developed-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Stable-dep-of: 2ba5772e53 ("gpio: idio-16: Define fixed direction of the GPIO lines")
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 31299a5e02 ]
This is a preparation for the upcoming GENMASK_U*() and BIT_U*()
changes. After introducing those new macros, there will be a lot of
scrolling between the #if, #else and #endif.
Add a comment to the #else and #endif preprocessor macros to help keep
track of which context we are in. Also, add new lines to better
visually separate the non-asm and asm sections.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Stable-dep-of: 2ba5772e53 ("gpio: idio-16: Define fixed direction of the GPIO lines")
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 094ee6017e ]
Following operations can trigger a warning[1]:
ip netns add ns1
ip netns exec ns1 ip link add bond0 type bond mode balance-rr
ip netns exec ns1 ip link set dev bond0 xdp obj af_xdp_kern.o sec xdp
ip netns exec ns1 ip link set bond0 type bond mode broadcast
ip netns del ns1
When delete the namespace, dev_xdp_uninstall() is called to remove xdp
program on bond dev, and bond_xdp_set() will check the bond mode. If bond
mode is changed after attaching xdp program, the warning may occur.
Some bond modes (broadcast, etc.) do not support native xdp. Set bond mode
with xdp program attached is not good. Add check for xdp program when set
bond mode.
[1]
------------[ cut here ]------------
WARNING: CPU: 0 PID: 11 at net/core/dev.c:9912 unregister_netdevice_many_notify+0x8d9/0x930
Modules linked in:
CPU: 0 UID: 0 PID: 11 Comm: kworker/u4:0 Not tainted 6.14.0-rc4 #107
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
Workqueue: netns cleanup_net
RIP: 0010:unregister_netdevice_many_notify+0x8d9/0x930
Code: 00 00 48 c7 c6 6f e3 a2 82 48 c7 c7 d0 b3 96 82 e8 9c 10 3e ...
RSP: 0018:ffffc90000063d80 EFLAGS: 00000282
RAX: 00000000ffffffa1 RBX: ffff888004959000 RCX: 00000000ffffdfff
RDX: 0000000000000000 RSI: 00000000ffffffea RDI: ffffc90000063b48
RBP: ffffc90000063e28 R08: ffffffff82d39b28 R09: 0000000000009ffb
R10: 0000000000000175 R11: ffffffff82d09b40 R12: ffff8880049598e8
R13: 0000000000000001 R14: dead000000000100 R15: ffffc90000045000
FS: 0000000000000000(0000) GS:ffff888007a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000d406b60 CR3: 000000000483e000 CR4: 00000000000006f0
Call Trace:
<TASK>
? __warn+0x83/0x130
? unregister_netdevice_many_notify+0x8d9/0x930
? report_bug+0x18e/0x1a0
? handle_bug+0x54/0x90
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? unregister_netdevice_many_notify+0x8d9/0x930
? bond_net_exit_batch_rtnl+0x5c/0x90
cleanup_net+0x237/0x3d0
process_one_work+0x163/0x390
worker_thread+0x293/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0xec/0x1e0
? __pfx_kthread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 9e2ee5c7e7 ("net, bonding: Add XDP support to the bonding driver")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Acked-by: Jussi Maki <joamaki@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250321044852.1086551-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Rajani Kantha <681739313@139.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ce8370e2e6 ]
When no audit rules are in place, fanotify event results are
unconditionally dropped due to an explicit check for the existence of
any audit rules. Given this is a report from another security
sub-system, allow it to be recorded regardless of the existence of any
audit rules.
To test, install and run the fapolicyd daemon with default config. Then
as an unprivileged user, create and run a very simple binary that should
be denied. Then check for an event with
ausearch -m FANOTIFY -ts recent
Link: https://issues.redhat.com/browse/RHEL-9065
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dd831ac822 upstream.
To prevent a potential crash in agg_dequeue (net/sched/sch_qfq.c)
when cl->qdisc->ops->peek(cl->qdisc) returns NULL, we check the return
value before using it, similar to the existing approach in sch_hfsc.c.
To avoid code duplication, the following changes are made:
1. Changed qdisc_warn_nonwc(include/net/pkt_sched.h) into a static
inline function.
2. Moved qdisc_peek_len from net/sched/sch_hfsc.c to
include/net/pkt_sched.h so that sch_qfq can reuse it.
3. Applied qdisc_peek_len in agg_dequeue to avoid crashing.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250705212143.3982664-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f04aad36a0 upstream.
syzkaller discovered the following crash: (kernel BUG)
[ 44.607039] ------------[ cut here ]------------
[ 44.607422] kernel BUG at mm/userfaultfd.c:2067!
[ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none)
[ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460
<snip other registers, drop unreliable trace>
[ 44.617726] Call Trace:
[ 44.617926] <TASK>
[ 44.619284] userfaultfd_release+0xef/0x1b0
[ 44.620976] __fput+0x3f9/0xb60
[ 44.621240] fput_close_sync+0x110/0x210
[ 44.622222] __x64_sys_close+0x8f/0x120
[ 44.622530] do_syscall_64+0x5b/0x2f0
[ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 44.623244] RIP: 0033:0x7f365bb3f227
Kernel panics because it detects UFFD inconsistency during
userfaultfd_release_all(). Specifically, a VMA which has a valid pointer
to vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags.
The inconsistency is caused in ksm_madvise(): when user calls madvise()
with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode,
it accidentally clears all flags stored in the upper 32 bits of
vma->vm_flags.
Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int and
int are 32-bit wide. This setup causes the following mishap during the &=
~VM_MERGEABLE assignment.
VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000.
After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is then
promoted to unsigned long before the & operation. This promotion fills
upper 32 bits with leading 0s, as we're doing unsigned conversion (and
even for a signed conversion, this wouldn't help as the leading bit is 0).
& operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffff
instead of intended 0xffff'ffff'7fff'ffff and hence accidentally clears
the upper 32-bits of its value.
Fix it by changing `VM_MERGEABLE` constant to unsigned long, using the
BIT() macro.
Note: other VM_* flags are not affected: This only happens to the
VM_MERGEABLE flag, as the other VM_* flags are all constants of type int
and after ~ operation, they end up with leading 1 and are thus converted
to unsigned long with leading 1s.
Note 2:
After commit 31defc3b01 ("userfaultfd: remove (VM_)BUG_ON()s"), this is
no longer a kernel BUG, but a WARNING at the same place:
[ 45.595973] WARNING: CPU: 1 PID: 2474 at mm/userfaultfd.c:2067
but the root-cause (flag-drop) remains the same.
[akpm@linux-foundation.org: rust bindgen wasn't able to handle BIT(), from Miguel]
Link: https://lore.kernel.org/oe-kbuild-all/202510030449.VfSaAjvd-lkp@intel.com/
Link: https://lkml.kernel.org/r/20251001090353.57523-2-acsjakub@amazon.de
Fixes: 7677f7fd8b ("userfaultfd: add minor fault registration mode")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: SeongJae Park <sj@kernel.org>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Xu Xin <xu.xin16@zte.com.cn>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[acsjakub@amazon.de: adjust context in bindgings_helper.h]
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1dbf1d590d ]
In ip_output() skb->dev is updated from the skb_dst(skb)->dev
this can become invalid when the interface is unregistered and freed,
Introduced new skb_dst_dev_rcu() function to be used instead of
skb_dst_dev() within rcu_locks in ip_output.This will ensure that
all the skb's associated with the dev being deregistered will
be transnmitted out first, before freeing the dev.
Given that ip_output() is called within an rcu_read_lock()
critical section or from a bottom-half context, it is safe to introduce
an RCU read-side critical section within it.
Multiple panic call stacks were observed when UL traffic was run
in concurrency with device deregistration from different functions,
pasting one sample for reference.
[496733.627565][T13385] Call trace:
[496733.627570][T13385] bpf_prog_ce7c9180c3b128ea_cgroupskb_egres+0x24c/0x7f0
[496733.627581][T13385] __cgroup_bpf_run_filter_skb+0x128/0x498
[496733.627595][T13385] ip_finish_output+0xa4/0xf4
[496733.627605][T13385] ip_output+0x100/0x1a0
[496733.627613][T13385] ip_send_skb+0x68/0x100
[496733.627618][T13385] udp_send_skb+0x1c4/0x384
[496733.627625][T13385] udp_sendmsg+0x7b0/0x898
[496733.627631][T13385] inet_sendmsg+0x5c/0x7c
[496733.627639][T13385] __sys_sendto+0x174/0x1e4
[496733.627647][T13385] __arm64_sys_sendto+0x28/0x3c
[496733.627653][T13385] invoke_syscall+0x58/0x11c
[496733.627662][T13385] el0_svc_common+0x88/0xf4
[496733.627669][T13385] do_el0_svc+0x2c/0xb0
[496733.627676][T13385] el0_svc+0x2c/0xa4
[496733.627683][T13385] el0t_64_sync_handler+0x68/0xb4
[496733.627689][T13385] el0t_64_sync+0x1a4/0x1a8
Changes in v3:
- Replaced WARN_ON() with WARN_ON_ONCE(), as suggested by Willem de Bruijn.
- Dropped legacy lines mistakenly pulled in from an outdated branch.
Changes in v2:
- Addressed review comments from Eric Dumazet
- Used READ_ONCE() to prevent potential load/store tearing
- Added skb_dst_dev_rcu() and used along with rcu_read_lock() in ip_output
Signed-off-by: Sharath Chandra Vurukala <quic_sharathv@quicinc.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250730105118.GA26100@hu-sharathv-hyd.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 833d4313bc ("mptcp: reset blackhole on success with non-loopback ifaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a74fc62eec ]
Use the new helpers as a first step to deal with
potential dst->dev races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 833d4313bc ("mptcp: reset blackhole on success with non-loopback ifaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 88fe14253e ]
dst->dev is read locklessly in many contexts,
and written in dst_dev_put().
Fixing all the races is going to need many changes.
We probably will have to add full RCU protection.
Add three helpers to ease this painful process.
static inline struct net_device *dst_dev(const struct dst_entry *dst)
{
return READ_ONCE(dst->dev);
}
static inline struct net_device *skb_dst_dev(const struct sk_buff *skb)
{
return dst_dev(skb_dst(skb));
}
static inline struct net *skb_dst_dev_net(const struct sk_buff *skb)
{
return dev_net(skb_dst_dev(skb));
}
static inline struct net *skb_dst_dev_net_rcu(const struct sk_buff *skb)
{
return dev_net_rcu(skb_dst_dev(skb));
}
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 833d4313bc ("mptcp: reset blackhole on success with non-loopback ifaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 15492700ac ]
tcp_in_quickack_mode() is called from input path for small packets.
It calls __sk_dst_get() which reads sk->sk_dst_cache which has been
put in sock_read_tx group (for good reasons).
Then dst_metric(dst, RTAX_QUICKACK) also needs extra cache line misses.
Cache RTAX_QUICKACK in icsk->icsk_ack.dst_quick_ack to no longer pull
these cache lines for the cases a delayed ACK is scheduled.
After this patch TCP receive path does not longer access sock_read_tx
group.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250312083907.1931644-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 833d4313bc ("mptcp: reset blackhole on success with non-loopback ifaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e7b9ecce56 ]
TCP uses of dev_net() are under RCU protection, change them
to dev_net_rcu() to get LOCKDEP support.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 833d4313bc ("mptcp: reset blackhole on success with non-loopback ifaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 21f4d45eba ]
Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too.
While ipv4 tunnel headroom adjustment growth was limited in
commit 5ae1e9922b ("net: ip_tunnel: prevent perpetual headroom growth"),
ipv6 tunnel yet increases the headroom without any ceiling.
Reflect ipv4 tunnel headroom adjustment limit on ipv6 version.
Credits to Francesco Ruggeri, who was originally debugging this issue
and wrote local Arista-specific patch and a reproducer.
Fixes: 8eb30be035 ("ipv6: Create ip6_tnl_xmit")
Cc: Florian Westphal <fw@strlen.de>
Cc: Francesco Ruggeri <fruggeri05@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://patch.msgid.link/20251009-ip6_tunnel-headroom-v2-1-8e4dbd8f7e35@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 201c53c687 ]
Introduce the free_usb_request() function that frees both the request's
buffer and the request itself.
This function serves as the cleanup callback for DEFINE_FREE() to enable
automatic, scope-based cleanup for usb_request pointers.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-2-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-2-4997bf277548@google.com
Stable-dep-of: 75a5b8d4dd ("usb: gadget: f_ncm: Refactor bind path to use __free()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bfb1d99d96 ]
Gadget function drivers often have goto-based error handling in their
bind paths, which can be bug-prone. Refactoring these paths to use
__free() scope-based cleanup is desirable, but currently blocked.
The blocker is that usb_ep_free_request(ep, req) requires two
parameters, while the __free() mechanism can only pass a pointer to the
request itself.
Store an endpoint pointer in the struct usb_request. The pointer is
populated centrally in usb_ep_alloc_request() on every successful
allocation, making the request object self-contained.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-1-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-1-4997bf277548@google.com
Stable-dep-of: 75a5b8d4dd ("usb: gadget: f_ncm: Refactor bind path to use __free()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 898374fdd7 ]
When a listener is added, a part of creation of transport also registers
program/port with rpcbind. However, when the listener is removed,
while transport goes away, rpcbind still has the entry for that
port/type.
When deleting the transport, unregister with rpcbind when appropriate.
---v2 created a new xpt_flag XPT_RPCB_UNREG to mark TCP and UDP
transport and at xprt destroy send rpcbind unregister if flag set.
Suggested-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: d093c90892 ("nfsd: fix management of listener transports")
Cc: stable@vger.kernel.org
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eccbbc7c00 ]
The heuristic for limiting the number of incoming connections to nfsd
currently uses sv_nrthreads - allowing more connections if more threads
were configured.
A future patch will allow number of threads to grow dynamically so that
there will be no need to configure sv_nrthreads. So we need a different
solution for limiting connections.
It isn't clear what problem is solved by limiting connections (as
mentioned in a code comment) but the most likely problem is a connection
storm - many connections that are not doing productive work. These will
be closed after about 6 minutes already but it might help to slow down a
storm.
This patch adds a per-connection flag XPT_PEER_VALID which indicates
that the peer has presented a filehandle for which it has some sort of
access. i.e the peer is known to be trusted in some way. We now only
count connections which have NOT been determined to be valid. There
should be relative few of these at any given time.
If the number of non-validated peer exceed a limit - currently 64 - we
close the oldest non-validated peer to avoid having too many of these
useless connections.
Note that this patch significantly changes the meaning of the various
configuration parameters for "max connections". The next patch will
remove all of these.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 898374fdd7 ("nfsd: unregister with rpcbind when deleting a transport")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f97aef092e ]
Commit a755d0e2d4 ("cpufreq: Honour transition_latency over
transition_delay_us") caused platforms where cpuinfo.transition_latency
is CPUFREQ_ETERNAL to get a very large transition latency whereas
previously it had been capped at 10 ms (and later at 2 ms).
This led to a user-observable regression between 6.6 and 6.12 as
described by Shawn:
"The dbs sampling_rate was 10000 us on 6.6 and suddently becomes
6442450 us (4294967295 / 1000 * 1.5) on 6.12 for these platforms
because the default transition delay was dropped [...].
It slows down dbs governor's reacting to CPU loading change
dramatically. Also, as transition_delay_us is used by schedutil
governor as rate_limit_us, it shows a negative impact on device
idle power consumption, because the device gets slightly less time
in the lowest OPP."
Evidently, the expectation of the drivers using CPUFREQ_ETERNAL as
cpuinfo.transition_latency was that it would be capped by the core,
but they may as well return a default transition latency value instead
of CPUFREQ_ETERNAL and the core need not do anything with it.
Accordingly, introduce CPUFREQ_DEFAULT_TRANSITION_LATENCY_NS and make
all of the drivers in question use it instead of CPUFREQ_ETERNAL. Also
update the related Rust binding.
Fixes: a755d0e2d4 ("cpufreq: Honour transition_latency over transition_delay_us")
Closes: https://lore.kernel.org/linux-pm/20250922125929.453444-1-shawnguo2@yeah.net/
Reported-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 6.6+ <stable@vger.kernel.org> # 6.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2264949.irdbgypaU6@rafael.j.wysocki
[ rjw: Fix typo in new symbol name, drop redundant type cast from Rust binding ]
Tested-by: Shawn Guo <shawnguo@kernel.org> # with cpufreq-dt driver
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ omitted Rust changes ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4d6fc29f36 ]
Patch series "mm/ksm: Fix incorrect accounting of KSM counters during
fork", v3.
The first patch in this series fixes the incorrect accounting of KSM
counters such as ksm_merging_pages, ksm_rmap_items, and the global
ksm_zero_pages during fork.
The following patch add a selftest to verify the ksm_merging_pages counter
was updated correctly during fork.
Test Results
============
Without the first patch
-----------------------
# [RUN] test_fork_ksm_merging_page_count
not ok 10 ksm_merging_page in child: 32
With the first patch
--------------------
# [RUN] test_fork_ksm_merging_page_count
ok 10 ksm_merging_pages is not inherited after fork
This patch (of 2):
Currently, the KSM-related counters in `mm_struct`, such as
`ksm_merging_pages`, `ksm_rmap_items`, and `ksm_zero_pages`, are inherited
by the child process during fork. This results in inconsistent
accounting.
When a process uses KSM, identical pages are merged and an rmap item is
created for each merged page. The `ksm_merging_pages` and
`ksm_rmap_items` counters are updated accordingly. However, after a fork,
these counters are copied to the child while the corresponding rmap items
are not. As a result, when the child later triggers an unmerge, there are
no rmap items present in the child, so the counters remain stale, leading
to incorrect accounting.
A similar issue exists with `ksm_zero_pages`, which maintains both a
global counter and a per-process counter. During fork, the per-process
counter is inherited by the child, but the global counter is not
incremented. Since the child also references zero pages, the global
counter should be updated as well. Otherwise, during zero-page unmerge,
both the global and per-process counters are decremented, causing the
global counter to become inconsistent.
To fix this, ksm_merging_pages and ksm_rmap_items are reset to 0 during
fork, and the global ksm_zero_pages counter is updated with the
per-process ksm_zero_pages value inherited by the child. This ensures
that KSM statistics remain accurate and reflect the activity of each
process correctly.
Link: https://lkml.kernel.org/r/cover.1758648700.git.donettom@linux.ibm.com
Link: https://lkml.kernel.org/r/7b9870eb67ccc0d79593940d9dbd4a0b39b5d396.1758648700.git.donettom@linux.ibm.com
Fixes: 7609385337 ("ksm: count ksm merging pages for each process")
Fixes: cb4df4cae4 ("ksm: count allocated ksm rmap_items for each process")
Fixes: e2942062e0 ("ksm: count all zero pages placed by KSM")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ replaced mm_flags_test() calls with test_bit() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit feb8ae81b2 upstream.
Introduce acpi_gbl_use_global_lock, which allows to skip the Global Lock
initialization. This is useful for systems without Global Lock (such as
loong_arch), so as to avoid error messages during boot phase:
ACPI Error: Could not enable global_lock event (20240827/evxfevnt-182)
ACPI Error: No response from Global Lock hardware, disabling lock (20240827/evglock-59)
Link: 463cb0fe
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8327bd4fcb upstream.
With `CONFIG_TRACE_MMIO_ACCESS=y`, the `{read,write}{b,w,l,q}{_relaxed}()`
mmio accessors unconditionally call `log_{post_}{read,write}_mmio()`
helpers, which in turn call the ftrace ops for `rwmmio` trace events
This adds a performance penalty per mmio accessor call, even when
`rwmmio` events are disabled at runtime (~80% overhead on local
measurement).
Guard these with `tracepoint_enabled()`.
Signed-off-by: Varad Gautam <varadgautam@google.com>
Fixes: 210031971c ("asm-generic/io: Add logging support for MMIO accessors")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f37df9a0eb upstream.
v4l2_subdev_call_state_try() macro allocates a subdev state with
__v4l2_subdev_state_alloc(), but does not check the returned value. If
__v4l2_subdev_state_alloc fails, it returns an ERR_PTR, and that would
cause v4l2_subdev_call_state_try() to crash.
Add proper error handling to v4l2_subdev_call_state_try().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: 982c048718 ("media: subdev: Add v4l2_subdev_call_state_try() macro")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aJTNtpDUbTz7eyJc%40stanley.mountain/
Cc: stable@vger.kernel.org
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d8fdabe19 upstream.
The clk div bits (2 bits wide) do not start in bit 16 but in bit 15. Fix it
accordingly.
Fixes: e31166f0fd ("iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250829-adf4350-fix-v2-2-0bf543ba797d@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16abbabc00 upstream.
Set __entry->dir to the actual "dir" parameter of all trace events
in dma_alloc_class. This struct member was left uninitialized by
mistake.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Fixes: 3afff779a7 ("dma-mapping: trace dma_alloc/free direction")
Cc: stable@vger.kernel.org
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251001061028.412258-1-ptesarik@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
