[ Upstream commit 3d5221af9c ]
Commit 61fafbee6c ("xfrm: Determine inner GSO type from packet inner
protocol") attempted to fix GSO segmentation by reading the inner
protocol from XFRM_MODE_SKB_CB(skb)->protocol. This was incorrect
because the field holds the inner L4 protocol (TCP/UDP) instead of the
required tunnel protocol. Also, the memory location (shared by
XFRM_SKB_CB(skb) which could be overwritten by xfrm_replay_overflow())
is prone to corruption. This combination caused the kernel to select
the wrong inner mode and get the wrong address family.
The correct value is in xfrm_offload(skb)->proto, which is set from
the outer tunnel header's protocol field by esp[4|6]_gso_encap(). It
is initialized by xfrm[4|6]_tunnel_encap_add() to either IPPROTO_IPIP
or IPPROTO_IPV6, using xfrm_af2proto() and correctly reflects the
inner packet's address family.
Fixes: 61fafbee6c ("xfrm: Determine inner GSO type from packet inner protocol")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1caf272972 ]
Use the new helper as a step to deal with potential dst->dev races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Harshit: Backport to 6.12.y, pulled this is a prerequisite]
Stable-dep-of: 99a2ace61b ("net: use dst_dev_rcu() in sk_setup_caps()")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d55acb9732 ]
Be consistent and use the same terminology as other lwt users: orig_dst
is the dst_entry before the transformation, while dst is either the
dst_entry in the cache or the dst_entry after the transformation
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250415112554.23823-2-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[Harshit: Backport to 6.12.y]
Stable-dep-of: 99a2ace61b ("net: use dst_dev_rcu() in sk_setup_caps()")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1adaea51c6 ]
On PREEMPT_RT kernels, after rt6_get_pcpu_route() returns NULL, the
current task can be preempted. Another task running on the same CPU
may then execute rt6_make_pcpu_route() and successfully install a
pcpu_rt entry. When the first task resumes execution, its cmpxchg()
in rt6_make_pcpu_route() will fail because rt6i_pcpu is no longer
NULL, triggering the BUG_ON(prev). It's easy to reproduce it by adding
mdelay() after rt6_get_pcpu_route().
Using preempt_disable/enable is not appropriate here because
ip6_rt_pcpu_alloc() may sleep.
Fix this by handling the cmpxchg() failure gracefully on PREEMPT_RT:
free our allocation and return the existing pcpu_rt installed by
another task. The BUG_ON is replaced by WARN_ON_ONCE for non-PREEMPT_RT
kernels where such races should not occur.
Link: https://syzkaller.appspot.com/bug?extid=9b35e9bc0951140d13e6
Fixes: d2d6422f8b ("x86: Allow to enable PREEMPT_RT.")
Reported-by: syzbot+9b35e9bc0951140d13e6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6918cd88.050a0220.1c914e.0045.GAE@google.com/T/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20251223051413.124687-1-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58fc7342b5 ]
There exists a kernel oops caused by a BUG_ON(nhead < 0) at
net/core/skbuff.c:2232 in pskb_expand_head().
This bug is triggered as part of the calipso_skbuff_setattr()
routine when skb_cow() is passed headroom > INT_MAX
(i.e. (int)(skb_headroom(skb) + len_delta) < 0).
The root cause of the bug is due to an implicit integer cast in
__skb_cow(). The check (headroom > skb_headroom(skb)) is meant to ensure
that delta = headroom - skb_headroom(skb) is never negative, otherwise
we will trigger a BUG_ON in pskb_expand_head(). However, if
headroom > INT_MAX and delta <= -NET_SKB_PAD, the check passes, delta
becomes negative, and pskb_expand_head() is passed a negative value for
nhead.
Fix the trigger condition in calipso_skbuff_setattr(). Avoid passing
"negative" headroom sizes to skb_cow() within calipso_skbuff_setattr()
by only using skb_cow() to grow headroom.
PoC:
Using `netlabelctl` tool:
netlabelctl map del default
netlabelctl calipso add pass doi:7
netlabelctl map add default address:0::1/128 protocol:calipso,7
Then run the following PoC:
int fd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_UDP);
// setup msghdr
int cmsg_size = 2;
int cmsg_len = 0x60;
struct msghdr msg;
struct sockaddr_in6 dest_addr;
struct cmsghdr * cmsg = (struct cmsghdr *) calloc(1,
sizeof(struct cmsghdr) + cmsg_len);
msg.msg_name = &dest_addr;
msg.msg_namelen = sizeof(dest_addr);
msg.msg_iov = NULL;
msg.msg_iovlen = 0;
msg.msg_control = cmsg;
msg.msg_controllen = cmsg_len;
msg.msg_flags = 0;
// setup sockaddr
dest_addr.sin6_family = AF_INET6;
dest_addr.sin6_port = htons(31337);
dest_addr.sin6_flowinfo = htonl(31337);
dest_addr.sin6_addr = in6addr_loopback;
dest_addr.sin6_scope_id = 31337;
// setup cmsghdr
cmsg->cmsg_len = cmsg_len;
cmsg->cmsg_level = IPPROTO_IPV6;
cmsg->cmsg_type = IPV6_HOPOPTS;
char * hop_hdr = (char *)cmsg + sizeof(struct cmsghdr);
hop_hdr[1] = 0x9; //set hop size - (0x9 + 1) * 8 = 80
sendmsg(fd, &msg, 0);
Fixes: 2917f57b6b ("calipso: Allow the lsm to label the skbuff directly.")
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Will Rosenberg <whrosenb@asu.edu>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20251219173637.797418-1-whrosenb@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db5b4e39c4 ]
Over the years, syzbot found many ways to crash the kernel
in ip6gre_header() [1].
This involves team or bonding drivers ability to dynamically
change their dev->needed_headroom and/or dev->hard_header_len
In this particular crash mld_newpack() allocated an skb
with a too small reserve/headroom, and by the time mld_sendpack()
was called, syzbot managed to attach an ip6gre device.
[1]
skbuff: skb_under_panic: text:ffffffff8a1d69a8 len:136 put:40 head:ffff888059bc7000 data:ffff888059bc6fe8 tail:0x70 end:0x6c0 dev:team0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:213 !
<TASK>
skb_under_panic net/core/skbuff.c:223 [inline]
skb_push+0xc3/0xe0 net/core/skbuff.c:2641
ip6gre_header+0xc8/0x790 net/ipv6/ip6_gre.c:1371
dev_hard_header include/linux/netdevice.h:3436 [inline]
neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618
neigh_output include/net/neighbour.h:556 [inline]
ip6_finish_output2+0xfb3/0x1480 net/ipv6/ip6_output.c:136
__ip6_finish_output net/ipv6/ip6_output.c:-1 [inline]
ip6_finish_output+0x234/0x7d0 net/ipv6/ip6_output.c:220
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247
NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318
mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855
mld_send_cr net/ipv6/mcast.c:2154 [inline]
mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693
Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Reported-by: syzbot+43a2ebcf2a64b1102d64@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/693b002c.a70a0220.33cd7b.0033.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251211173550.2032674-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f72514b3c5 ]
When an IPv6 Router Advertisement (RA) is received for a prefix, the
kernel creates the corresponding on-link route with flags RTF_ADDRCONF
and RTF_PREFIX_RT configured and RTF_EXPIRES if lifetime is set.
If later a user configures a static IPv6 address on the same prefix the
kernel clears the RTF_EXPIRES flag but it doesn't clear the RTF_ADDRCONF
and RTF_PREFIX_RT. When the next RA for that prefix is received, the
kernel sees the route as RA-learned and wrongly configures back the
lifetime. This is problematic because if the route expires, the static
address won't have the corresponding on-link route.
This fix clears the RTF_ADDRCONF and RTF_PREFIX_RT flags preventing that
the lifetime is configured when the next RA arrives. If the static
address is deleted, the route becomes RA-learned again.
Fixes: 14ef37b6d0 ("ipv6: fix route lookup in addrconf_prefix_rcv()")
Reported-by: Garri Djavadyan <g.djavadyan@gmail.com>
Closes: https://lore.kernel.org/netdev/ba807d39aca5b4dcf395cc11dca61a130a52cfd3.camel@gmail.com/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20251115095939.6967-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42e42562c9 ]
While reverting commit f75a2804da ("xfrm: destroy xfrm_state
synchronously on net exit path"), I incorrectly changed
xfrm_state_flush's "proto" argument back to IPSEC_PROTO_ANY. This
reverts some of the changes in commit dbb2483b2a ("xfrm: clean up
xfrm protocol checks"), and leads to some states not being removed
when we exit the netns.
Pass 0 instead of IPSEC_PROTO_ANY from both xfrm_state_fini
xfrm6_tunnel_net_exit, so that xfrm_state_flush deletes all states.
Fixes: 2a198bbec6 ("Revert "xfrm: destroy xfrm_state synchronously on net exit path"")
Reported-by: syzbot+6641a61fe0e2e89ae8c5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6641a61fe0e2e89ae8c5
Tested-by: syzbot+6641a61fe0e2e89ae8c5@syzkaller.appspotmail.com
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a198bbec6 ]
This reverts commit f75a2804da.
With all states (whether user or kern) removed from the hashtables
during deletion, there's no need for synchronous destruction of
states. xfrm6_tunnel states still need to have been destroyed (which
will be the case when its last user is deleted (not destroyed)) so
that xfrm6_tunnel_free_spi removes it from the per-netns hashtable
before the netns is destroyed.
This has the benefit of skipping one synchronize_rcu per state (in
__xfrm_state_destroy(sync=true)) when we exit a netns.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b441cf3f8c ]
The ipcomp fallback tunnels currently get deleted (from the various
lists and hashtables) as the last user state that needed that fallback
is destroyed (not deleted). If a reference to that user state still
exists, the fallback state will remain on the hashtables/lists,
triggering the WARN in xfrm_state_fini. Because of those remaining
references, the fix in commit f75a2804da ("xfrm: destroy xfrm_state
synchronously on net exit path") is not complete.
We recently fixed one such situation in TCP due to defered freeing of
skbs (commit 9b6412e697 ("tcp: drop secpath at the same time as we
currently drop dst")). This can also happen due to IP reassembly: skbs
with a secpath remain on the reassembly queue until netns
destruction. If we can't guarantee that the queues are flushed by the
time xfrm_state_fini runs, there may still be references to a (user)
xfrm_state, preventing the timely deletion of the corresponding
fallback state.
Instead of chasing each instance of skbs holding a secpath one by one,
this patch fixes the issue directly within xfrm, by deleting the
fallback state as soon as the last user state depending on it has been
deleted. Destruction will still happen when the final reference is
dropped.
A separate lockdep class for the fallback state is required since
we're going to lock x->tunnel while x is locked.
Fixes: 9d4139c769 ("netns xfrm: per-netns xfrm_state_all list")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61fafbee6c ]
The GSO segmentation functions for ESP tunnel mode
(xfrm4_tunnel_gso_segment and xfrm6_tunnel_gso_segment) were
determining the inner packet's L2 protocol type by checking the static
x->inner_mode.family field from the xfrm state.
This is unreliable. In tunnel mode, the state's actual inner family
could be defined by x->inner_mode.family or by
x->inner_mode_iaf.family. Checking only the former can lead to a
mismatch with the actual packet being processed, causing GSO to create
segments with the wrong L2 header type.
This patch fixes the bug by deriving the inner mode directly from the
packet's inner protocol stored in XFRM_MODE_SKB_CB(skb)->protocol.
Instead of replicating the code, this patch modifies the
xfrm_ip2inner_mode helper function. It now correctly returns
&x->inner_mode if the selector family (x->sel.family) is already
specified, thereby handling both specific and AF_UNSPEC cases
appropriately.
With this change, ESP GSO can use xfrm_ip2inner_mode to get the
correct inner mode. It doesn't affect existing callers, as the updated
logic now mirrors the checks they were already performing externally.
Fixes: 26dbd66eab ("esp: choose the correct inner protocol for GSO on inter address family tunnels")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fba1eb39e ]
Add READ_ONCE() annotations because np->rxpmtu can be changed
while udpv6_recvmsg() and rawv6_recvmsg() read it.
Since this is a very rarely used feature, and that udpv6_recvmsg()
and rawv6_recvmsg() read np->rxopt anyway, change the test order
so that np->rxpmtu does not need to be in a hot cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250916160951.541279-4-edumazet@google.com
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db99b2f2b3 ]
tcp reject code won't reply to a tcp reset.
But the icmp reject 'netdev' family versions will reply to icmp
dst-unreach errors, unlike icmp_send() and icmp6_send() which are used
by the inet family implementation (and internally by the REJECT target).
Check for the icmp(6) type and do not respond if its an unreachable error.
Without this, something like 'ip protocol icmp reject', when used
in a netdev chain attached to 'lo', cause a packet loop.
Same for two hosts that both use such a rule: each error packet
will be replied to.
Such situation persist until the (bogus) rule is amended to ratelimit or
checks the icmp type before the reject statement.
As the inet versions don't do this make the netdev ones follow along.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d95261eeb ]
In ipv6_rpl_srh_rcv() we use min(net->ipv6.devconf_all->rpl_seg_enabled,
idev->cnf.rpl_seg_enabled) is intended to return 0 when either value is
zero, but if one of the values is negative it will in fact return non-zero.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20250901123726.1972881-3-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2327a3d6f6 ]
Fix field-spanning memcpy warnings in ah6_output() and
ah6_output_done() where extension headers are copied to/from IPv6
address fields, triggering fortify-string warnings about writes beyond
the 16-byte address fields.
memcpy: detected field-spanning write (size 40) of single field "&top_iph->saddr" at net/ipv6/ah6.c:439 (size 16)
WARNING: CPU: 0 PID: 8838 at net/ipv6/ah6.c:439 ah6_output+0xe7e/0x14e0 net/ipv6/ah6.c:439
The warnings are false positives as the extension headers are
intentionally placed after the IPv6 header in memory. Fix by properly
copying addresses and extension headers separately, and introduce
helper functions to avoid code duplication.
Reported-by: syzbot+01b0667934cdceb4451c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=01b0667934cdceb4451c
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7b9ecce56 ]
TCP uses of dev_net() are under RCU protection, change them
to dev_net_rcu() to get LOCKDEP support.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 833d4313bc ("mptcp: reset blackhole on success with non-loopback ifaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 21f4d45eba ]
Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too.
While ipv4 tunnel headroom adjustment growth was limited in
commit 5ae1e9922b ("net: ip_tunnel: prevent perpetual headroom growth"),
ipv6 tunnel yet increases the headroom without any ceiling.
Reflect ipv4 tunnel headroom adjustment limit on ipv6 version.
Credits to Francesco Ruggeri, who was originally debugging this issue
and wrote local Arista-specific patch and a reproducer.
Fixes: 8eb30be035 ("ipv6: Create ip6_tnl_xmit")
Cc: Florian Westphal <fw@strlen.de>
Cc: Francesco Ruggeri <fruggeri05@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://patch.msgid.link/20251009-ip6_tunnel-headroom-v2-1-8e4dbd8f7e35@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa390321ab ]
When tcp_ao_copy_all_matching() fails in tcp_v6_syn_recv_sock() it just
exits the function. This ends up causing a memory-leak:
unreferenced object 0xffff0000281a8200 (size 2496):
comm "softirq", pid 0, jiffies 4295174684
hex dump (first 32 bytes):
7f 00 00 06 7f 00 00 06 00 00 00 00 cb a8 88 13 ................
0a 00 03 61 00 00 00 00 00 00 00 00 00 00 00 00 ...a............
backtrace (crc 5ebdbe15):
kmemleak_alloc+0x44/0xe0
kmem_cache_alloc_noprof+0x248/0x470
sk_prot_alloc+0x48/0x120
sk_clone_lock+0x38/0x3b0
inet_csk_clone_lock+0x34/0x150
tcp_create_openreq_child+0x3c/0x4a8
tcp_v6_syn_recv_sock+0x1c0/0x620
tcp_check_req+0x588/0x790
tcp_v6_rcv+0x5d0/0xc18
ip6_protocol_deliver_rcu+0x2d8/0x4c0
ip6_input_finish+0x74/0x148
ip6_input+0x50/0x118
ip6_sublist_rcv+0x2fc/0x3b0
ipv6_list_rcv+0x114/0x170
__netif_receive_skb_list_core+0x16c/0x200
netif_receive_skb_list_internal+0x1f0/0x2d0
This is because in tcp_v6_syn_recv_sock (and the IPv4 counterpart), when
exiting upon error, inet_csk_prepare_forced_close() and tcp_done() need
to be called. They make sure the newsk will end up being correctly
free'd.
tcp_v4_syn_recv_sock() makes this very clear by having the put_and_exit
label that takes care of things. So, this patch here makes sure
tcp_v4_syn_recv_sock and tcp_v6_syn_recv_sock have similar
error-handling and thus fixes the leak for TCP-AO.
Fixes: 06b22ef295 ("net/tcp: Wire TCP-AO to request sockets")
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250830-tcpao_leak-v1-1-e5878c2c3173@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6dd1aa2cb ]
The icmp_ndo_send function was originally introduced to ensure proper
rate limiting when icmp_send is called by a network device driver,
where the packet's source address may have already been transformed
by SNAT.
However, the original implementation only considers the
IP_CT_DIR_ORIGINAL direction for SNAT and always replaced the packet's
source address with that of the original-direction tuple. This causes
two problems:
1. For SNAT:
Reply-direction packets were incorrectly translated using the source
address of the CT original direction, even though no translation is
required.
2. For DNAT:
Reply-direction packets were not handled at all. In DNAT, the original
direction's destination is translated. Therefore, in the reply
direction the source address must be set to the reply-direction
source, so rate limiting works as intended.
Fix this by using the connection direction to select the correct tuple
for source address translation, and adjust the pre-checks to handle
reply-direction packets in case of DNAT.
Additionally, wrap the `ct->status` access in READ_ONCE(). This avoids
possible KCSAN reports about concurrent updates to `ct->status`.
Fixes: 0b41713b60 ("icmp: introduce helper for nat'd source address in network device context")
Signed-off-by: Fabian Bläse <fabian@blaese.de>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91a79b7922 ]
recent patches to add a WARN() when replacing skb dst entry found an
old bug:
WARNING: include/linux/skbuff.h:1165 skb_dst_check_unset include/linux/skbuff.h:1164 [inline]
WARNING: include/linux/skbuff.h:1165 skb_dst_set include/linux/skbuff.h:1210 [inline]
WARNING: include/linux/skbuff.h:1165 nf_reject_fill_skb_dst+0x2a4/0x330 net/ipv4/netfilter/nf_reject_ipv4.c:234
[..]
Call Trace:
nf_send_unreach+0x17b/0x6e0 net/ipv4/netfilter/nf_reject_ipv4.c:325
nft_reject_inet_eval+0x4bc/0x690 net/netfilter/nft_reject_inet.c:27
expr_call_ops_eval net/netfilter/nf_tables_core.c:237 [inline]
..
This is because blamed commit forgot about loopback packets.
Such packets already have a dst_entry attached, even at PRE_ROUTING stage.
Instead of checking hook just check if the skb already has a route
attached to it.
Fixes: f53b9b0bdc ("netfilter: introduce support for reject at prerouting stage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250820123707.10671-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84967deee9 ]
The seg6_genl_sethmac() directly uses the algorithm ID provided by the
userspace without verifying whether it is an HMAC algorithm supported
by the system.
If an unsupported HMAC algorithm ID is configured, packets using SRv6 HMAC
will be dropped during encapsulation or decapsulation.
Fixes: 4f4853dc1c ("ipv6: sr: implement API to control SR HMAC structure")
Signed-off-by: Minhong He <heminhong@kylinos.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250815063845.85426-1-heminhong@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a458b29021 upstream.
To prevent timing attacks, MACs need to be compared in constant time.
Use the appropriate helper function for this.
Fixes: bf355b8d2c ("ipv6: sr: add core files for SR HMAC support")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250818202724.15713-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dbd40f318c ]
Since commit 63ed8de4be ("mld: add mc_lock for protecting
per-interface mld data"), every multicast resource is protected
by inet6_dev->mc_lock.
RTNL is unnecessary in terms of protection but still needed for
synchronisation between addrconf_ifdown() and __ipv6_dev_mc_inc().
Once we removed RTNL, there would be a race below, where we could
add a multicast address to a dead inet6_dev.
CPU1 CPU2
==== ====
addrconf_ifdown() __ipv6_dev_mc_inc()
if (idev->dead) <-- false
dead = true return -ENODEV;
ipv6_mc_destroy_dev() / ipv6_mc_down()
mutex_lock(&idev->mc_lock)
...
mutex_unlock(&idev->mc_lock)
mutex_lock(&idev->mc_lock)
...
mutex_unlock(&idev->mc_lock)
The race window can be easily closed by checking inet6_dev->dead
under inet6_dev->mc_lock in __ipv6_dev_mc_inc() as addrconf_ifdown()
will acquire it after marking inet6_dev dead.
Let's check inet6_dev->dead under mc_lock in __ipv6_dev_mc_inc().
Note that now __ipv6_dev_mc_inc() no longer depends on RTNL and
we can remove ASSERT_RTNL() there and the RTNL comment above
addrconf_join_solict().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250702230210.3115355-4-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8d8ce1b51 ]
fib6_info_uses_dev() seems to rely on RCU without an explicit
protection.
Like the prior fix in rt6_nlmsg_size(),
we need to make sure fib6_del_route() or fib6_add_rt2node()
have not removed the anchor from the list, or we risk an infinite loop.
Fixes: d9ccb18f83 ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250725140725.3626540-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54e6fe9dd3 ]
While testing prior patch, I was able to trigger
an infinite loop in rt6_nlmsg_size() in the following place:
list_for_each_entry_rcu(sibling, &f6i->fib6_siblings,
fib6_siblings) {
rt6_nh_nlmsg_size(sibling->fib6_nh, &nexthop_len);
}
This is because fib6_del_route() and fib6_add_rt2node()
uses list_del_rcu(), which can confuse rcu readers,
because they might no longer see the head of the list.
Restart the loop if f6i->fib6_nsiblings is zero.
Fixes: d9ccb18f83 ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250725140725.3626540-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3365afd3ab ]
The netfilter hook is invoked with skb->dev for input netdevice, and
vif_dev for output netdevice. However at the point of invocation, skb->dev
is already set to vif_dev, and MR-forwarded packets are reported with
in=out:
# ip6tables -A FORWARD -j LOG --log-prefix '[forw]'
# cd tools/testing/selftests/net/forwarding
# ./router_multicast.sh
# dmesg | fgrep '[forw]'
[ 1670.248245] [forw]IN=v5 OUT=v5 [...]
For reference, IPv4 MR code shows in and out as appropriate.
Fix by caching skb->dev and using the updated value for output netdev.
Fixes: 7bc570c8b4 ("[IPV6] MROUTE: Support multicast forwarding.")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/3141ae8386fbe13fef4b793faa75e6bae58d798a.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ac9e29211 ]
The referenced commit replaced a call to __xfrm4|6_udp_encap_rcv() with
a custom check for non-ESP markers. But what the called function also
did was setting the transport header to the ESP header. The function
that follows, esp4|6_gro_receive(), relies on that being set when it calls
xfrm_parse_spi(). We have to set the full offset as the skb's head was
not moved yet so adding just the UDP header length won't work.
Fixes: e3fd057776 ("xfrm: Fix UDP GRO handling for some corner cases")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae3264a25a ]
pmc->idev is still used in ip6_mc_clear_src(), so as mld_clear_delrec()
does, the reference should be put after ip6_mc_clear_src() return.
Fixes: 63ed8de4be ("mld: add mc_lock for protecting per-interface mld data")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20250714141957.3301871-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4e914ef063 upstream.
Use addrconf_add_dev() instead of ipv6_find_idev() in
addrconf_gre_config() so that we don't just get the inet6_dev, but also
install the default ff00::/8 multicast route.
Before commit 3e6a0243ff ("gre: Fix again IPv6 link-local address
generation."), the multicast route was created at the end of the
function by addrconf_add_mroute(). But this code path is now only taken
in one particular case (gre devices not bound to a local IP address and
in EUI64 mode). For all other cases, the function exits early and
addrconf_add_mroute() is not called anymore.
Using addrconf_add_dev() instead of ipv6_find_idev() in
addrconf_gre_config(), fixes the problem as it will create the default
multicast route for all gre devices. This also brings
addrconf_gre_config() a bit closer to the normal netdevice IPv6
configuration code (addrconf_dev_config()).
Cc: stable@vger.kernel.org
Fixes: 3e6a0243ff ("gre: Fix again IPv6 link-local address generation.")
Reported-by: Aiden Yang <ling@moedove.com>
Closes: https://lore.kernel.org/netdev/CANR=AhRM7YHHXVxJ4DmrTNMeuEOY87K2mLmo9KMed1JMr20p6g@mail.gmail.com/
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/027a923dcb550ad115e6d93ee8bb7d310378bd01.1752070620.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 096208592b upstream.
This initializes tclass and dontfrag before cmsg parsing, removing the
need for explicit checks against -1 in each caller.
Leave hlimit set to -1, because its full initialization
(in ip6_sk_dst_hoplimit) requires more state (dst, flowi6, ..).
This also prepares for calling sockcm_init in a follow-on patch.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-7-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54580ccdd8 upstream.
As of the blamed commit ipc6.dontfrag is always initialized at the
start of udpv6_sendmsg, by ipcm6_init_sk, to either 0 or 1.
Later checks against -1 are no longer needed and the branches are now
dead code.
The blamed commit had removed those branches. But I had overlooked
this one case.
UDP has both a lockless fast path and a slower path for corked
requests. This branch remained in the fast path.
Fixes: 096208592b ("ipv6: replace ipcm6_init calls with ipcm6_init_sk")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250307033620.411611-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6043b794c7 upstream.
During ILA address translations, the L4 checksums can be handled in
different ways. One of them, adj-transport, consist in parsing the
transport layer and updating any found checksum. This logic relies on
inet_proto_csum_replace_by_diff and produces an incorrect skb->csum when
in state CHECKSUM_COMPLETE.
This bug can be reproduced with a simple ILA to SIR mapping, assuming
packets are received with CHECKSUM_COMPLETE:
$ ip a show dev eth0
14: eth0@if15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 62:ae:35:9e:0f:8d brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet6 3333:0:0:1::c078/64 scope global
valid_lft forever preferred_lft forever
inet6 fd00:10:244:1::c078/128 scope global nodad
valid_lft forever preferred_lft forever
inet6 fe80::60ae:35ff:fe9e:f8d/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
$ ip ila add loc_match fd00:10:244:1 loc 3333:0:0:1 \
csum-mode adj-transport ident-type luid dev eth0
Then I hit [fd00:10:244:1::c078]:8000 with a server listening only on
[3333:0:0:1::c078]:8000. With the bug, the SYN packet is dropped with
SKB_DROP_REASON_TCP_CSUM after inet_proto_csum_replace_by_diff changed
skb->csum. The translation and drop are visible on pwru [1] traces:
IFACE TUPLE FUNC
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) ipv6_rcv
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) ip6_rcv_core
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) nf_hook_slow
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) inet_proto_csum_replace_by_diff
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) tcp_v6_early_demux
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_route_input
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_input
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_input_finish
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_protocol_deliver_rcu
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) raw6_local_deliver
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ipv6_raw_deliver
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) tcp_v6_rcv
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) __skb_checksum_complete
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) kfree_skb_reason(SKB_DROP_REASON_TCP_CSUM)
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_release_head_state
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_release_data
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_free_head
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) kfree_skbmem
This is happening because inet_proto_csum_replace_by_diff is updating
skb->csum when it shouldn't. The L4 checksum is updated such that it
"cancels" the IPv6 address change in terms of checksum computation, so
the impact on skb->csum is null.
Note this would be different for an IPv4 packet since three fields
would be updated: the IPv4 address, the IP checksum, and the L4
checksum. Two would cancel each other and skb->csum would still need
to be updated to take the L4 checksum change into account.
This patch fixes it by passing an ipv6 flag to
inet_proto_csum_replace_by_diff, to skip the skb->csum update if we're
in the IPv6 case. Note the behavior of the only other user of
inet_proto_csum_replace_by_diff, the BPF subsystem, is left as is in
this patch and fixed in the subsequent patch.
With the fix, using the reproduction from above, I can confirm
skb->csum is not touched by inet_proto_csum_replace_by_diff and the TCP
SYN proceeds to the application after the ILA translation.
Link: https://github.com/cilium/pwru [1]
Fixes: 65d7ab8de5 ("net: Identifier Locator Addressing module")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/b5539869e3550d46068504feb02d37653d939c0b.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7632fedb26 ]
The kernel currently validates that the length of the provided nexthop
address does not exceed the specified length. This can lead to the
kernel reading uninitialized memory if user space provided a shorter
length than the specified one.
Fix by validating that the provided length exactly matches the specified
one.
Fixes: d1df6fd8a1 ("ipv6: sr: define core operations for seg6local lightweight tunnel")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250604113252.371528-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a119669fb ]
fib has two modes:
1. Obtain output device according to source or destination address
2. Obtain the type of the address, e.g. local, unicast, multicast.
'fib daddr type' should return 'local' if the address is configured
in this netns or unicast otherwise.
'fib daddr . iif type' should return 'local' if the address is configured
on the input interface or unicast otherwise, i.e. more restrictive.
However, if the interface is part of a VRF, then 'fib daddr type'
returns unicast even if the address is configured on the incoming
interface.
This is broken for both ipv4 and ipv6.
In the ipv4 case, inet_dev_addr_type must only be used if the
'iif' or 'oif' (strict mode) was requested.
Else inet_addr_type_dev_table() needs to be used and the correct
dev argument must be passed as well so the correct fib (vrf) table
is used.
In the ipv6 case, the bug is similar, without strict mode, dev is NULL
so .flowi6_l3mdev will be set to 0.
Add a new 'nft_fib_l3mdev_master_ifindex_rcu()' helper and use that
to init the .l3mdev structure member.
For ipv6, use it from nft_fib6_flowi_init() which gets called from
both the 'type' and the 'route' mode eval functions.
This provides consistent behaviour for all modes for both ipv4 and ipv6:
If strict matching is requested, the input respectively output device
of the netfilter hooks is used.
Otherwise, use skb->dev to obtain the l3mdev ifindex.
Without this, most type checks in updated nft_fib.sh selftest fail:
FAIL: did not find veth0 . 10.9.9.1 . local in fibtype4
FAIL: did not find veth0 . dead:1::1 . local in fibtype6
FAIL: did not find veth0 . dead:9::1 . local in fibtype6
FAIL: did not find tvrf . 10.0.1.1 . local in fibtype4
FAIL: did not find tvrf . 10.9.9.1 . local in fibtype4
FAIL: did not find tvrf . dead:1::1 . local in fibtype6
FAIL: did not find tvrf . dead:9::1 . local in fibtype6
FAIL: fib expression address types match (iif in vrf)
(fib errounously returns 'unicast' for all of them, even
though all of these addresses are local to the vrf).
Fixes: f6d0cbcf09 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b53f46eb4 ]
With a VRF, ipv4 and ipv6 FIB expression behave differently.
fib daddr . iif oif
Will return the input interface name for ipv4, but the real device
for ipv6. Example:
If VRF device name is tvrf and real (incoming) device is veth0.
First round is ok, both ipv4 and ipv6 will yield 'veth0'.
But in the second round (incoming device will be set to "tvrf"), ipv4
will yield "tvrf" whereas ipv6 returns "veth0" for the second round too.
This makes ipv6 behave like ipv4.
A followup patch will add a test case for this, without this change
it will fail with:
get element inet t fibif6iif { tvrf . dead:1::99 . tvrf }
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
FAIL: did not find tvrf . dead:1::99 . tvrf in fibif6iif
Alternatively we could either not do anything at all or change
ipv4 to also return the lower/real device, however, nft (userspace)
doc says "iif: if fib lookup provides a route then check its output
interface is identical to the packets input interface." which is what
the nft fib ipv4 behaviour is.
Fixes: f6d0cbcf09 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa04c6f45b ]
The config NF_CONNTRACK_BRIDGE will change the bridge forwarding for
fragmented packets.
The original bridge does not know that it is a fragmented packet and
forwards it directly, after NF_CONNTRACK_BRIDGE is enabled, function
nf_br_ip_fragment and br_ip6_fragment will check the headroom.
In original br_forward, insufficient headroom of skb may indeed exist,
but there's still a way to save the skb in the device driver after
dev_queue_xmit.So droping the skb will change the original bridge
forwarding in some cases.
Fixes: 3c171f496e ("netfilter: bridge: add connection tracking system")
Signed-off-by: Huajian Yang <huajianyang@asrmicro.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3fd057776 ]
This fixes an issue that's caused if there is a mismatch between the data
offset in the GRO header and the length fields in the regular sk_buff due
to the pskb_pull()/skb_push() calls. That's because the UDP GRO layer
stripped off the UDP header via skb_gro_pull() already while the UDP
header was explicitly not pulled/pushed in this function.
For example, an IKE packet that triggered this had len=data_len=1268 and
the data_offset in the GRO header was 28 (IPv4 + UDP). So pskb_pull()
was called with an offset of 28-8=20, which reduced len to 1248 and via
pskb_may_pull() and __pskb_pull_tail() it also set data_len to 1248.
As the ESP offload module was not loaded, the function bailed out and
called skb_push(), which restored len to 1268, however, data_len remained
at 1248.
So while skb_headlen() was 0 before, it was now 20. The latter caused a
difference of 8 instead of 28 (or 0 if pskb_pull()/skb_push() was called
with the complete GRO data_offset) in gro_try_pull_from_frag0() that
triggered a call to gro_pull_from_frag0() that corrupted the packet.
This change uses a more GRO-like approach seen in other GRO receivers
via skb_gro_header() to just read the actual data we are interested in
and does not try to "restore" the UDP header at this point to call the
existing function. If the offload module is not loaded, it immediately
bails out, otherwise, it only does a quick check to see if the packet
is an IKE or keepalive packet instead of calling the existing function.
Fixes: 172bf009c1 ("xfrm: Support GRO for IPv4 ESP in UDP encapsulation")
Fixes: 221ddb723d ("xfrm: Support GRO for IPv6 ESP in UDP encapsulation")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 028363685b ]
The current scheme for caching the encap socket can lead to reference
leaks when we try to delete the netns.
The reference chain is: xfrm_state -> enacp_sk -> netns
Since the encap socket is a userspace socket, it holds a reference on
the netns. If we delete the espintcp state (through flush or
individual delete) before removing the netns, the reference on the
socket is dropped and the netns is correctly deleted. Otherwise, the
netns may not be reachable anymore (if all processes within the ns
have terminated), so we cannot delete the xfrm state to drop its
reference on the socket.
This patch results in a small (~2% in my tests) performance
regression.
A GC-type mechanism could be added for the socket cache, to clear
references if the state hasn't been used "recently", but it's a lot
more complex than just not caching the socket.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a1ccffd30 ]
The following patch will not set skb->sk from VRF path.
Let's fetch net from fib_rule->fr_net instead of sock_net(skb->sk)
in fib[46]_rule_configure().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250207072502.87775-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db014522f3 ]
Currently some IPv6 tunnel drivers set tnl->net to dev_net(dev) in
ndo_init(), which is called in register_netdevice(). However, it lacks
the context of link-netns when we enable cross-net tunnels at device
registration time.
Let's move the init of tunnel link-netns before register_netdevice().
ip6_gre has already initialized netns, so just remove the redundant
assignment.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-8-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a18dfa9925 ]
When spanning datagram construction over multiple send calls using
MSG_MORE, per datagram settings are configured on the first send.
That is when ip(6)_setup_cork stores these settings for subsequent use
in __ip(6)_append_data and others.
The only flag that escaped this was dontfrag. As a result, a datagram
could be constructed with df=0 on the first sendmsg, but df=1 on a
next. Which is what cmsg_ip.sh does in an upcoming MSG_MORE test in
the "diff" scenario.
Changing datagram conditions in the middle of constructing an skb
makes this already complex code path even more convoluted. It is here
unintentional. Bring this flag in line with expected sockopt/cmsg
behavior.
And stop passing ipc6 to __ip6_append_data, to avoid such issues
in the future. This is already the case for __ip_append_data.
inet6_cork had a 6 byte hole, so the 1B flag has no impact.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250307033620.411611-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e6a0243ff ]
Use addrconf_addr_gen() to generate IPv6 link-local addresses on GRE
devices in most cases and fall back to using add_v4_addrs() only in
case the GRE configuration is incompatible with addrconf_addr_gen().
GRE used to use addrconf_addr_gen() until commit e5dd729460 ("ip/ip6_gre:
use the same logic as SIT interfaces when computing v6LL address")
restricted this use to gretap and ip6gretap devices, and created
add_v4_addrs() (borrowed from SIT) for non-Ethernet GRE ones.
The original problem came when commit 9af28511be ("addrconf: refuse
isatap eui64 for INADDR_ANY") made __ipv6_isatap_ifid() fail when its
addr parameter was 0. The commit says that this would create an invalid
address, however, I couldn't find any RFC saying that the generated
interface identifier would be wrong. Anyway, since gre over IPv4
devices pass their local tunnel address to __ipv6_isatap_ifid(), that
commit broke their IPv6 link-local address generation when the local
address was unspecified.
Then commit e5dd729460 ("ip/ip6_gre: use the same logic as SIT
interfaces when computing v6LL address") tried to fix that case by
defining add_v4_addrs() and calling it to generate the IPv6 link-local
address instead of using addrconf_addr_gen() (apart for gretap and
ip6gretap devices, which would still use the regular
addrconf_addr_gen(), since they have a MAC address).
That broke several use cases because add_v4_addrs() isn't properly
integrated into the rest of IPv6 Neighbor Discovery code. Several of
these shortcomings have been fixed over time, but add_v4_addrs()
remains broken on several aspects. In particular, it doesn't send any
Router Sollicitations, so the SLAAC process doesn't start until the
interface receives a Router Advertisement. Also, add_v4_addrs() mostly
ignores the address generation mode of the interface
(/proc/sys/net/ipv6/conf/*/addr_gen_mode), thus breaking the
IN6_ADDR_GEN_MODE_RANDOM and IN6_ADDR_GEN_MODE_STABLE_PRIVACY cases.
Fix the situation by using add_v4_addrs() only in the specific scenario
where the normal method would fail. That is, for interfaces that have
all of the following characteristics:
* run over IPv4,
* transport IP packets directly, not Ethernet (that is, not gretap
interfaces),
* tunnel endpoint is INADDR_ANY (that is, 0),
* device address generation mode is EUI64.
In all other cases, revert back to the regular addrconf_addr_gen().
Also, remove the special case for ip6gre interfaces in add_v4_addrs(),
since ip6gre devices now always use addrconf_addr_gen() instead.
Note:
This patch was originally applied as commit 183185a18f ("gre: Fix
IPv6 link-local address generation."). However, it was then reverted
by commit fc486c2d06 ("Revert "gre: Fix IPv6 link-local address
generation."") because it uncovered another bug that ended up
breaking net/forwarding/ip6gre_custom_multipath_hash.sh. That other
bug has now been fixed by commit 4d0ab3a688 ("ipv6: Start path
selection from the first nexthop"). Therefore we can now revive this
GRE patch (no changes since original commit 183185a18f ("gre: Fix
IPv6 link-local address generation.").
Fixes: e5dd729460 ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/a88cc5c4811af36007645d610c95102dccb360a6.1746225214.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
