commit 29d71b8a5a upstream.
The soundwire update_status() callback may be called multiple times with
the same ATTACHED status but initialisation should only be done when
transitioning from UNATTACHED to ATTACHED.
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Cc: stable@vger.kernel.org # 5.6
Cc: Srinivas Kandagatla <srini@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260102111413.9605-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49aadf830e upstream.
The soundwire update_status() callback may be called multiple times with
the same ATTACHED status but initialisation should only be done when
transitioning from UNATTACHED to ATTACHED.
This avoids repeated initialisation of the codecs during boot of
machines like the Lenovo ThinkPad X13s:
[ 11.614523] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.618022] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.621377] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.624065] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.631382] wsa883x-codec sdw:1:0:0217:0202:00:2: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.634424] wsa883x-codec sdw:1:0:0217:0202:00:2: WSA883X Version 1_1, Variant: WSA8835_V2
Fixes: 43b8c7dc85 ("ASoC: codecs: add wsa883x amplifier support")
Cc: stable@vger.kernel.org # 6.0
Cc: Srinivas Kandagatla <srini@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260102111413.9605-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 46378ab9fc ]
The word length is the physical width of the channel slots. So the
hw_params would misconfigure when format width and physical width
doesn't match. Like S24_LE which has data width of 24 bits but physical
width of 32 bits. So if using asymmetric formats you will get a lot of
noise.
Fixes: 689c7655b5 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Signed-off-by: Emil Svendsen <emas@bang-olufsen.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-4-8f7ecec525c8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be7664c81d ]
The "snd_soc_component" in "adcx140_priv" was only used once but never
set. It was only used for reaching "dev" which is already present in
"adcx140_priv".
Fixes: 4e82971f7b ("ASoC: tlv320adcx140: Add a new kcontrol")
Signed-off-by: Emil Svendsen <emas@bang-olufsen.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-2-8f7ecec525c8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 390caeed08 ]
The CS42L43 codec's load detection can return different impedance values
that map to either HEADPHONE or LINEOUT jack types. However, the
soc_jack_pins array only maps SND_JACK_HEADPHONE to the "Headphone" DAPM
pin, not SND_JACK_LINEOUT.
When headphones are detected with an impedance that maps to LINEOUT
(such as impedance value 0x2), the driver reports SND_JACK_LINEOUT.
Since this doesn't match the jack pin mask, the "Headphone" DAPM pin
is not activated, and no audio is routed to the headphone outputs.
Fix by adding SND_JACK_LINEOUT to the Headphone pin mask, so that both
headphone and line-out detection properly enable the headphone output
path.
This fixes no audio output on devices like the Lenovo ThinkPad P16 Gen 3
where headphones are detected with LINEOUT impedance.
Fixes: d74bad3b74 ("ASoC: intel: sof_sdw_cs42l43: Create separate jacks for hp and mic")
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Cole Leavitt <cole@unwrap.rs>
Link: https://patch.msgid.link/20260114025518.28519-1-cole@unwrap.rs
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5e96e54ec ]
Set gpiochip parent to the struct device of the dummy GPIO driver
so that the software node will be associated with the GPIO chip.
The recent commit e5d527be7e ("gpio: swnode: don't use the
swnode's name as the key for GPIO lookup") broke cirrus_scodec_test,
because the software node no longer gets associated with the GPIO
driver by name.
Instead, setting struct gpio_chip.parent to the owning struct device
will find the node using a normal fwnode lookup.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test")
Link: https://patch.msgid.link/20260113130954.574670-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 120f3e6ff7 upstream.
The soundwire update_status() callback may be called multiple times with
the same ATTACHED status but initialisation should only be done when
transitioning from UNATTACHED to ATTACHED.
Fix the inverted hw_init flag which was set to false instead of true
after initialisation which defeats its purpose and may result in
repeated unnecessary initialisation.
Similarly, the initial state of the flag was also inverted so that the
codec would only be initialised and brought out of regmap cache only
mode if its status first transitions to UNATTACHED.
Fixes: aa21a7d4f6 ("ASoC: codecs: wsa884x: Add WSA884x family of speakers")
Cc: stable@vger.kernel.org # 6.5
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260102111413.9605-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 161a0c617a upstream.
When config table entries don't match with the device to be probed,
currently we fall back to SND_INTEL_DSP_DRIVER_ANY, which means to
allow any drivers to bind with it.
This was set so with the assumption (or hope) that all controller
drivers should cover the devices generally, but in practice, this
caused a problem as reported recently. Namely, when a specific
kconfig for SOF isn't set for the modern Intel chips like Alderlake,
a wrong driver (AVS) got probed and failed. This is because we have
entries like:
#if IS_ENABLED(CONFIG_SND_SOC_SOF_ALDERLAKE)
/* Alder Lake / Raptor Lake */
{
.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
.device = PCI_DEVICE_ID_INTEL_HDA_ADL_S,
},
....
#endif
so this entry is effective only when CONFIG_SND_SOC_SOF_ALDERLAKE is
set. If not set, there is no matching entry, hence it returns
SND_INTEL_DSP_DRIVER_ANY as fallback. OTOH, if the kconfig is set, it
explicitly falls back to SND_INTEL_DSP_DRIVER_LEGACY when no DMIC or
SoundWire is found -- that was the working scenario. That being said,
the current setup may be broken for modern Intel chips that are
supposed to work with either SOF or legacy driver when the
corresponding kconfig were missing.
For addressing the problem above, this patch changes the fallback
driver to the legacy driver, i.e. return SND_INTEL_DSP_DRIVER_LEGACY
type as much as possible. When CONFIG_SND_HDA_INTEL is also disabled,
the fallback is set to SND_INTEL_DSP_DRIVER_ANY type, just to be sure.
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/all/20251014034156.4480-1-safinaskar@gmail.com/
Tested-by: Askar Safin <safinaskar@gmail.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251210131553.184404-1-tiwai@suse.de
Signed-off-by: Askar Safin <safinaskar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 90ed688792 ]
Drivers does cache sync during runtime resume, setting all writable
registers. Not all writable registers are set in cache default, resulting
in the erorr message:
fsl-sai 30c30000.sai: using zero-initialized flat cache, this may cause
unexpected behavior
Fix this by adding missing writable register defaults.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20251216102246.676181-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2cb8ef037 ]
Add a DMI quirk for the Honor MagicBook X16 2025 laptop
fixing the issue where the internal microphone was
not detected.
Signed-off-by: Andrew Elantsev <elantsew.andrew@gmail.com>
Link: https://patch.msgid.link/20251210203800.142822-1-elantsew.andrew@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 830988b6cf ]
If ac97_add_adapter() fails, put_device() is the correct way to drop
the device reference. kfree() is not required.
Add kfree() if idr_alloc() fails and in ac97_adapter_release() to do
the cleanup.
Found by code review.
Fixes: 74426fbff6 ("ALSA: ac97: add an ac97 bus")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Link: https://patch.msgid.link/20251219162845.657525-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 57d508b5f7 ]
'version' is an enum, thus cast of pointer on 64-bit compile test with
clang W=1 causes:
rockchip_pdm.c:583:17: error: cast to smaller integer type 'enum rk_pdm_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
This was already fixed in commit 49a4a8d126 ("ASoC: rockchip: Fix
Wvoid-pointer-to-enum-cast warning") but then got bad in
commit 9958d85968 ("ASoC: Use device_get_match_data()").
Discussion on LKML also pointed out that 'uintptr_t' is not the correct
type and either 'kernel_ulong_t' or 'unsigned long' should be used,
with several arguments towards the latter [1].
Link: https://lore.kernel.org/r/CAMuHMdX7t=mabqFE5O-Cii3REMuyaePHmqX+j_mqyrn6XXzsoA@mail.gmail.com/ [1]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251203141644.106459-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bae7beda1 ]
The strm->sample_width is not filled during rz_ssi_dai_hw_params(). This
wrong value is used for caching sample_width in struct hw_params_cache.
Fix this issue by replacing 'strm->sample_width'->'params_width(params)'
in rz_ssi_dai_hw_params(). After this drop the variable sample_width
from struct rz_ssi_stream as it is unused.
Cc: stable@kernel.org
Fixes: 4f8cd05a43 ("ASoC: sh: rz-ssi: Add full duplex support")
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114073709.4376-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bcba172793 ]
For some reason we endedup allocating sdw_stream_runtime for every cpu dai,
this has two issues.
1. we never set snd_soc_dai_set_stream for non soundwire dai, which
means there is no way that we can free this, resulting in memory leak
2. startup and shutdown callbacks can be called without
hw_params callback called. This combination results in memory leak
because machine driver sruntime array pointer is only set in hw_params
callback.
Fix this by
1. adding a helper function to get sdw_runtime for substream
which can be used by shutdown callback to get hold of sruntime to free.
2. only allocate sdw_runtime for soundwire dais.
Fixes: d32bac9cb0 ("ASoC: qcom: Add helper for allocating Soundwire stream runtime")
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Steev Klimaszewski <threeway@gmail.com> # Thinkpad X13s
Link: https://patch.msgid.link/20251022143349.1081513-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dc90bbefa7 ]
In the existing definition of sdw_stream_runtime, the 'type' member is
never set and defaults to PCM. To prepare for the BPT/BRA support, we
need to special-case streams and make use of the 'type'.
No functional change for now, the implicit PCM type is now explicit.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: shumingf@realtek.com
Link: https://lore.kernel.org/r/20250227140615.8147-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: bcba172793 ("ASoC: qcom: sdw: fix memory leak for sdw_stream_runtime")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 52a525011c ]
The full duplex audio starts with half duplex mode and then switch to
full duplex mode (another FIFO reset) when both playback/capture
streams available leading to random audio left/right channel swap
issue. Fix this channel swap issue by detecting the full duplex
condition by populating struct dup variable in startup() callback
and synchronize starting both the play and capture at the same time
in rz_ssi_start().
Cc: stable@kernel.org
Fixes: 4f8cd05a43 ("ASoC: sh: rz-ssi: Add full duplex support")
Co-developed-by: Tony Tang <tony.tang.ks@renesas.com>
Signed-off-by: Tony Tang <tony.tang.ks@renesas.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114073709.4376-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81c53b52de upstream.
DSP expects the periods to be aligned to fragment sizes, currently
setting up to hw constriants on periods bytes is not going to work
correctly as we can endup with periods sizes aligned to 32 bytes however
not aligned to fragment size.
Update the constriants to use fragment size, and also set at step of
10ms for period size to accommodate DSP requirements of 10ms latency.
Fixes: 2a9e92d371 ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74cc4f3ea4 upstream.
A matching Common object post processing instance is normally resused
across multiple streams. However currently we close this on DSP
even though there is a refcount on this copp object, this can result in
below error.
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: Found Matching Copp 0x0
qcom-q6adm aprsvc:service:4:8: cmd = 0x10325 return error = 0x2
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: DSP returned error[2]
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: Found Matching Copp 0x0
qcom-q6adm aprsvc:service:4:8: cmd = 0x10325 return error = 0x2
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: cmd = 0x10327 return error = 0x2
qcom-q6adm aprsvc:service:4:8: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: Failed to close copp -22
qcom-q6adm aprsvc:service:4:8: cmd = 0x10327 return error = 0x2
qcom-q6adm aprsvc:service:4:8: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: Failed to close copp -22
Fix this by addressing moving the adm_close to copp_kref destructor
callback.
Fixes: 7b20b2be51 ("ASoC: qdsp6: q6adm: Add q6adm driver")
Cc: Stable@vger.kernel.org
Reported-by: Martino Facchin <m.facchin@arduino.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfbb12dfa1 upstream.
Do not stop a q6asm stream if its not started, this can result in
unnecessary dsp command which will timeout anyway something like below:
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: CMD 10bcd timeout
Fix this by correctly checking the state.
Fixes: 2a9e92d371 ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-5-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 950a4e5788 upstream.
Driver does not expect the appl_ptr to move backward and requires
explict sync. Make sure that the userspace does not do appl_ptr rewinds
by specifying the correct flags in pcm_info.
Without this patch, the result could be a forever loop as current logic assumes
that appl_ptr can only move forward.
Fixes: 3d4a4411aa ("ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c63b5a8ed upstream.
SM6115 does have soundwire controller in tx. For some reason
we ended up with this incorrect patch.
Fix this by adding the flag to reflect this in SoC data.
Fixes: 510c468842 ("ASoC: codecs: lpass-tx-macro: Add SM6115 support")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031120703.590201-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23261f0de0 upstream.
The reference taken to the sync provider OF node when probing the
platform device is currently only dropped if the set_sync() callback
fails during DAI probe.
Make sure to drop the reference on platform probe failures (e.g. probe
deferral) and on driver unbind.
This also avoids a potential use-after-free in case the DAI is ever
reprobed without first rebinding the platform driver.
Fixes: 5914d285f6 ("ASoC: stm32: sai: Add synchronization support")
Fixes: d4180b4c02 ("ASoC: stm32: sai: fix set_sync service")
Cc: Olivier Moysan <olivier.moysan@st.com>
Cc: stable@vger.kernel.org # 4.16: d4180b4c02
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: olivier moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20251124104908.15754-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e26ff429ea upstream.
Make sure to drop the reference taken when looking up the sync provider
device and its driver data during DAI probe on probe failures and on
unbind.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 7dd0d83558 ("ASoC: stm32: sai: simplify sync modes management")
Fixes: 1c3816a194 ("ASoC: stm32: sai: add missing put_device()")
Cc: stable@vger.kernel.org # 4.16: 1c3816a194
Cc: olivier moysan <olivier.moysan@st.com>
Cc: Wen Yang <yellowriver2010@hotmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: olivier moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20251124104908.15754-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86dc090f73 upstream.
The soundwire regmap that may be allocated during probe is not freed on
late probe failures.
Add the missing error handling.
Fixes: be2af391ce ("ASoC: codecs: Add WCD939x Soundwire devices driver")
Cc: stable@vger.kernel.org # 6.9
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251127135057.2216-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c34b04cc61 ]
The acpi_get_first_physical_node() function can return NULL, in which
case the get_device() function also returns NULL, but this value is
then dereferenced without checking,so add a check to prevent a crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 7b2f3eb492 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251202101338.11437-1-arefev@swemel.ru
[ sound/hda/codecs/side-codecs/ -> sound/pci/hda/ ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 00b960a83c ]
The reset_control handler has the reference count for usage, as there is
reset operation in runtime suspend and resume, then reset operation in
probe() would cause the reference count of reset not balanced.
Previously add reset operation in probe and remove is to fix the compile
issue with !CONFIG_PM, as the driver has been update to use
RUNTIME_PM_OPS(), so that change can be reverted.
Fixes: 1e0dff741b ("ASoC: ak4458: remove "reset-gpios" property handler")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251216070201.358477-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5526c1c6ba ]
get_meter_levels_from_urb() parses the 64-byte meter packets sent by
the device and fills the per-channel arrays meter_level[],
comp_level[] and master_level[] in struct snd_us16x08_meter_store.
Currently the function derives the channel index directly from the
meter packet (MUB2(meter_urb, s) - 1) and uses it to index those
arrays without validating the range. If the packet contains a
negative or out-of-range channel number, the driver may write past
the end of these arrays.
Introduce a local channel variable and validate it before updating the
arrays. We reject negative indices, limit meter_level[] and
comp_level[] to SND_US16X08_MAX_CHANNELS, and guard master_level[]
updates with ARRAY_SIZE(master_level).
Fixes: d2bb390a20 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk")
Reported-by: DARKNAVY (@DarkNavyOrg) <vr@darknavy.com>
Closes: https://lore.kernel.org/tencent_21C112743C44C1A2517FF219@qq.com
Signed-off-by: Shipei Qu <qu@darknavy.com>
Link: https://patch.msgid.link/20251217024630.59576-1-qu@darknavy.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5032347c04 ]
When pdacf_config() fails, snd_pdacf_probe() returns the error code
directly without freeing the sound card resources allocated by
snd_card_new(), which leads to a memory leak.
Add proper error handling to free the sound card and clear the card
list entry when pdacf_config() fails.
Fixes: 15b99ac172 ("[PATCH] pcmcia: add return value to _config() functions")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251215090433.211-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a03b40dea ]
When vxpocket_config() fails, vxpocket_probe() returns the error code
directly without freeing the sound card resources allocated by
snd_card_new(), which leads to a memory leak.
Add proper error handling to free the sound card and clear the
allocation bit when vxpocket_config() fails.
Fixes: 15b99ac172 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251215042652.695-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2c7e5e17c0 upstream.
clang W=1 builds warn:
nau8325.c:430:13: error: variable 'n2_max' is uninitialized when used here [-Werror,-Wuninitialized]
which are false positive, because the variables will be always
initialized when used (guarded by mclk_max!=0 check). However
initializing them upfront makes the code more obvious and easier, plus
it silences the warning.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251203140611.87191-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c4a13ba88 upstream.
The wavefront_send_sample() function has an integer overflow issue
when validating sample size. The header->size field is u32 but gets
cast to int for comparison with dev->freemem
Fix by using unsigned comparison to avoid integer overflow.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881B47789D1B060CE8BF4C3AFC2A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 324f3e03e8 upstream.
The function detect_stream_formats() reads the stream_count value directly
from a FireWire device without validating it. This can lead to
out-of-bounds writes when a malicious device provides a stream_count value
greater than MAX_STREAMS.
Fix by applying the same validation to both TX and RX stream counts in
detect_stream_formats().
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 58579c056c ("ALSA: dice: use extended protocol to detect available stream formats")
Cc: stable@vger.kernel.org
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881B043FC68B4C0DA40B73DAFDCA@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 298e753880 ]
In the DSP event handling code, a put_user() loop copies event data.
When the user buffer size is not aligned to 4 bytes, it could overwrite
beyond the buffer boundary.
Fix by adding a bounds check before put_user().
Suggested-by: Takashi Iwai <tiwai@suse.de>
Fixes: 634ec0b290 ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB788112C72AF8A1C8C448B4B8AFA3A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 210d77cca3 ]
The DSP event handling code in hwdep_read() could write more bytes to
the user buffer than requested, when a user provides a buffer smaller
than the event header size (8 bytes).
Fix by using min_t() to clamp the copy size, This ensures we never copy
more than the user requested.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 634ec0b290 ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB78810656377E79E58350D951AFD9A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ebbd45c33 ]
bcm63xx_soc_pcm_new() does not check the return value of
of_dma_configure(), which may fail with -EPROBE_DEFER or
other errors, allowing PCM setup to continue with incomplete
DMA configuration.
Add error checking for of_dma_configure() and return on failure.
Fixes: 88eb404ccc ("ASoC: brcm: Add DSL/PON SoC audio driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251202101642.492-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86a5b621be ]
Do not leave any resources hanging on the DSP side if
applying user settings fails.
Fixes: 768a3a3b32 ("ASoC: Intel: catpt: Optimize applying user settings")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251126095523.3925364-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73b97d46dd ]
memset_io() writes memory byte by byte with __raw_writeb() on the arm
platform if the size is word. but XCVR data RAM memory can't be accessed
with byte address, so with memset_io() the channel status control memory
is not really cleared, use writel_relaxed() instead.
Fixes: 2856448686 ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251126064509.1900974-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd41d3420e ]
This configuration was missing from the initial commit.
Found by Jiri Benc <jbenc@redhat.com>
Fixes: c0a3873b99 ("ASoC: nau8325: new driver")
Cc: Seven Lee <wtli@nuvoton.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-3-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4d072c98e ]
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20251126091759.2490019-2-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: cd41d3420e ("ASoC: nau8325: add missing build config")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 950167a99d ]
A wrong preiod at the end of the sentence was reported by one of my
customers. Their thorough code review is greatly appreciated.
Fixes: 49e2e353fb ("ASoC: tas2781: Add Calibration Kcontrols for Chromebook")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20251121234427.402-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21a9ab5b90 ]
The PureAudio APA DAC and Lotus DAC5 series are USB Audio
2.0 Class devices that support native Direct Stream Digital (DSD)
playback via specific vendor protocols.
Without these quirks, the devices may only function in standard
PCM mode, or fail to correctly report their DSD format capabilities
to the ALSA framework, preventing native DSD playback under Linux.
This commit adds new quirk entries for the mentioned DAC models
based on their respective Vendor/Product IDs (VID:PID), for example:
0x16d0:0x0ab1 (APA DAC), 0x16d0:0xeca1 (DAC5 series), etc.
The quirk ensures correct DSD format handling by setting the required
SNDRV_PCM_FMTBIT_DSD_U32_BE format bit and defining the DSD-specific
Audio Class 2.0 (AC2.0) endpoint configurations. This allows the ALSA
DSD API to correctly address the device for high-bitrate DSD streams,
bypassing the need for DoP (DSD over PCM).
Test on APA DAC and Lotus DAC5 SE under Arch Linux.
Tested-by: Lushih Hsieh <bruce@mail.kh.edu.tw>
Signed-off-by: Lushih Hsieh <bruce@mail.kh.edu.tw>
Link: https://patch.msgid.link/20251114052053.54989-1-bruce@mail.kh.edu.tw
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
