[ Upstream commit 3eb46fbb60 ]
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. This fixes queue reset failures
on APUs.
v2: preserve init and remap for MMIO case.
Fixes: b3e9bfd866 ("drm/amdgpu/gfx11: add ring reset callbacks")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b340ff216f)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1defcdc44 upstream.
The EXEC_COUNT field must be > 0. In the gfx shadow
handling we always emit a cond_exec packet after the gfx_shadow
packet, but the EXEC_COUNT never gets patched. This leads
to a hang when we try and reset queues on gfx11 APUs.
Fixes: c68cbbfd54 ("drm/amdgpu: cleanup conditional execution")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ba205ac3d6)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b1ecc9377 upstream.
On APUs such as Raven and Renoir (GC 9.1.0, 9.2.2, 9.3.0), the ih1 and
ih2 interrupt ring buffers are not initialized. This is by design, as
these secondary IH rings are only available on discrete GPUs. See
vega10_ih_sw_init() which explicitly skips ih1/ih2 initialization when
AMD_IS_APU is set.
However, amdgpu_gmc_filter_faults_remove() unconditionally uses ih1 to
get the timestamp of the last interrupt entry. When retry faults are
enabled on APUs (noretry=0), this function is called from the SVM page
fault recovery path, resulting in a NULL pointer dereference when
amdgpu_ih_decode_iv_ts_helper() attempts to access ih->ring[].
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0000000000000004
RIP: 0010:amdgpu_ih_decode_iv_ts_helper+0x22/0x40 [amdgpu]
Call Trace:
amdgpu_gmc_filter_faults_remove+0x60/0x130 [amdgpu]
svm_range_restore_pages+0xae5/0x11c0 [amdgpu]
amdgpu_vm_handle_fault+0xc8/0x340 [amdgpu]
gmc_v9_0_process_interrupt+0x191/0x220 [amdgpu]
amdgpu_irq_dispatch+0xed/0x2c0 [amdgpu]
amdgpu_ih_process+0x84/0x100 [amdgpu]
This issue was exposed by commit 1446226d32 ("drm/amdgpu: Remove GC HW
IP 9.3.0 from noretry=1") which changed the default for Renoir APU from
noretry=1 to noretry=0, enabling retry fault handling and thus
exercising the buggy code path.
Fix this by adding a check for ih1.ring_size before attempting to use
it. Also restore the soft_ih support from commit dd29944165 ("drm/amdgpu:
Rework retry fault removal"). This is needed if the hardware doesn't
support secondary HW IH rings.
v2: additional updates (Alex)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3814
Fixes: dd29944165 ("drm/amdgpu: Rework retry fault removal")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Jon Doron <jond@wiz.io>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6ce8d536c8)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9077d32a4b upstream.
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a2918f958d)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1f810471c upstream.
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1f16866bdb)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc4f433b14 upstream.
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e80b1d1aa1)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7fbff9e76 upstream.
The reference clock is supposed to be 100Mhz, but it
appears to actually be slightly lower (99.81Mhz).
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/14451
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 637fee3954)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e535c23513 upstream.
Make sure to drop the reference taken to the DDC device during probe on
probe failure (e.g. probe deferral) and on driver unbind.
Fixes: fcbc51e54d ("staging: drm/imx: Add support for Television Encoder (TVEv2)")
Cc: stable@vger.kernel.org # 3.10
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251030163456.15807-1-johan@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dedb897f11 upstream.
The hw clock gating register sequence consists of register value pairs
that are written to the GPU during initialisation.
The a690 hwcg sequence has two GMU registers in it that used to amount
to random writes in the GPU mapping, but since commit 188db3d7fe
("drm/msm/a6xx: Rebase GMU register offsets") they trigger a fault as
the updated offsets now lie outside the mapping. This in turn breaks
boot of machines like the Lenovo ThinkPad X13s.
Note that the updates of these GMU registers is already taken care of
properly since commit 40c297eb24 ("drm/msm/a6xx: Set GMU CGC
properties on a6xx too"), but for some reason these two entries were
left in the table.
Fixes: 5e7665b5e4 ("drm/msm/adreno: Add Adreno A690 support")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Fixes: 188db3d7fe ("drm/msm/a6xx: Rebase GMU register offsets")
Patchwork: https://patchwork.freedesktop.org/patch/695778/
Message-ID: <20251221164552.19990-1-johan@kernel.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
(cherry picked from commit dcbd2f8280)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 604826acb3 upstream.
Apparently we never actually filled these in, despite the fact that we do
in fact technically support atomic modesetting.
Since not having these filled in causes us to potentially forget to disable
fbdev and friends during suspend/resume, let's fix it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260121191320.210342-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d0bd10792d ]
* Implement missing DCB connectors in uconn.c previously defined in conn.h.
* Replace kernel WARN_ON macro with printk message to more gracefully signify
an unknown connector was encountered.
With this patch, unknown connectors are explicitly marked with value 0
(DCB_CONNECTOR_VGA) to match the tested current behavior. Although 0xff
(DCB_CONNECTOR_NONE) may be more suitable, I don't want to introduce a
breaking change.
Fixes: 8b7d92cad9 ("drm/nouveau/kms/nv50-: create connectors based on nvkm info")
Link: https://download.nvidia.com/open-gpu-doc/DCB/1/DCB-4.0-Specification.html#_connector_table_entry
Signed-off-by: Alex Ramírez <lxrmrz732@rocketmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Lyude: Remove unneeded parenthesis around nvkm_warn()]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251213005327.9495-3-lxrmrz732@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3036b4ce4b ]
* Add missing DCB connectors in conn.h as per the NVIDIA DCB specification.
A lot of connector logic was rewritten for Linux v6.5; some display connector types
went unaccounted-for which caused kernel warnings on devices with the now-unsupported
DCB connectors. This patch adds all of the DCB connectors as defined by NVIDIA to the
dcb_connector_type enum to bring back support for these connectors to the new logic.
Fixes: 8b7d92cad9 ("drm/nouveau/kms/nv50-: create connectors based on nvkm info")
Link: https://download.nvidia.com/open-gpu-doc/DCB/1/DCB-4.0-Specification.html#_connector_table_entry
Signed-off-by: Alex Ramírez <lxrmrz732@rocketmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Lyude: Clarify DCB_CONNECTOR_HDMI_0 weirdness in comments]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251213005327.9495-2-lxrmrz732@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 764a90eb02 ]
Radeon 430 and 520 are OEM GPUs from 2016~2017
They have the same device id: 0x6611 and revision: 0x87
On the Radeon 430, powertune is buggy and throttles the GPU,
never allowing it to reach its maximum SCLK. Work around this
bug by raising the TDP limits we program to the SMC from
24W (specified by the VBIOS on Radeon 430) to 32W.
Disabling powertune entirely is not a viable workaround,
because it causes the Radeon 520 to heat up above 100 C,
which I prefer to avoid.
Additionally, revise the maximum SCLK limit. Considering the
above issue, these GPUs never reached a high SCLK on Linux,
and the workarounds were added before the GPUs were released,
so the workaround likely didn't target these specifically.
Use 780 MHz (the maximum SCLK according to the VBIOS on the
Radeon 430). Note that the Radeon 520 VBIOS has a higher
maximum SCLK: 905 MHz, but in practice it doesn't seem to
perform better with the higher clock, only heats up more.
v2:
Move the workaround to si_populate_smc_tdp_limits.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 966d70f1e1)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5077426e1 ]
There is no reason to clear the SMC table.
We also don't need to recalculate the power limit then.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e214d62625)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 812062e74a ]
Possibility of no FW trace available after update in the fw_trace_mask due
to asynchronous mode of command consumption in the FW.
To ensure FW trace is available after update, wait for FW trace log update
command completion from the FW.
Fixes: cc1aeedb98 ("drm/imagination: Implement firmware infrastructure and META FW support")
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260108040936.129769-1-brajesh.gupta@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bf72b4b7bb upstream.
In vmw_compat_shader_add(), the return value check of vmw_shader_alloc()
is not proper. Modify the check for the return pointer 'res'.
Found by code review and compiled on ubuntu 20.04.
Fixes: 18e4a4669c ("drm/vmwgfx: Fix compat shader namespace")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20251224091105.1569464-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ab3d4353b upstream.
The connector type for the DataImage SCF0700C48GGU18 panel is missing and
devm_drm_panel_bridge_add() requires connector type to be set. This leads
to a warning and a backtrace in the kernel log and panel does not work:
"
WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8
"
The warning is triggered by a check for valid connector type in
devm_drm_panel_bridge_add(). If there is no valid connector type
set for a panel, the warning is printed and panel is not added.
Fill in the missing connector type to fix the warning and make
the panel operational once again.
Cc: stable@vger.kernel.org
Fixes: 97ceb1fb08 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260110152750.73848-1-marex@nabladev.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e9bc6be0f upstream.
For a while, I've been seeing a strange issue where some (usually not all)
of the display DMA channels will suddenly hang, particularly when there is
a visible cursor on the screen that is being frequently updated, and
especially when said cursor happens to go between two screens. While this
brings back lovely memories of fixing Intel Skylake bugs, I would quite
like to fix it :).
It turns out the problem that's happening here is that we're managing to
reach nv50_head_flush_set() in our atomic commit path without actually
holding nv50_disp->mutex. This means that cursor updates happening in
parallel (along with any other atomic updates that need to use the core
channel) will race with eachother, which eventually causes us to corrupt
the pushbuffer - leading to a plethora of various GSP errors, usually:
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000218 00102680 00000004 00800003
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 0000021c 00040509 00000004 00000001
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000000 00000000 00000001 00000001
The reason this is happening is because generally we check whether we need
to set nv50_atom->lock_core at the end of nv50_head_atomic_check().
However, curs507a_prepare is called from the fb_prepare callback, which
happens after the atomic check phase. As a result, this can lead to commits
that both touch the core channel but also don't grab nv50_disp->mutex.
So, fix this by making sure that we set nv50_atom->lock_core in
cus507a_prepare().
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 1590700d94 ("drm/nouveau/kms/nv50-: split each resource type into their own source files")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patch.msgid.link/20251219215344.170852-2-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80614c5098 upstream.
If dqm->ops.initialize() fails, add deallocate_hiq_sdma_mqd()
to release the memory allocated by allocate_hiq_sdma_mqd().
Move deallocate_hiq_sdma_mqd() up to ensure proper function
visibility at the point of use.
Fixes: 11614c36bc ("drm/amdkfd: Allocate MQD trunk for HIQ and SDMA")
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b7cccc8286)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28695ca09d upstream.
When an eGPU is unplugged the KFD topology should also be destroyed
for that GPU. This never happens because the fini_sw callbacks never
get to run. Run them manually before calling amdgpu_device_ip_fini_early()
when a device has already been disconnected.
This location is intentionally chosen to make sure that the kfd locking
refcount doesn't get incremented unintentionally.
Cc: kent.russell@amd.com
Closes: https://community.frame.work/t/amd-egpu-on-linux/8691/33
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a23e7b433)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fee5007765 upstream.
[Why]
DP-HDMI dongles can execeed bandwidth requirements on high resolution
monitors. This can lead to pruning the high resolution modes.
HDMI 1.3 bumped the clock to 340MHz, but display code never matched it.
[How]
Set default to (DVI) 165MHz. Once HDMI display is identified update
to 340MHz.
Reported-by: Dianne Skoll <dianne@skoll.ca>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4780
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ac1e65d8ad)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8d42cd228 upstream.
When compiling allmodconfig (CONFIG_WERROR=y) with clang-19, see the
following errors:
.../display/dc/dml2/display_mode_core.c:6268:13: warning: stack frame size (3128) exceeds limit (3072) in 'dml_prefetch_check' [-Wframe-larger-than]
.../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7236:13: warning: stack frame size (3256) exceeds limit (3072) in 'dml_core_mode_support' [-Wframe-larger-than]
Mark static functions called by dml_prefetch_check() and
dml_core_mode_support() noinline_for_stack to avoid them become huge
functions and thus exceed the frame size limit.
A way to reproduce:
$ git checkout next-20250107
$ mkdir build_dir
$ export PATH=/tmp/llvm-19.1.6-x86_64/bin:$PATH
$ make LLVM=1 O=build_dir allmodconfig
$ make LLVM=1 O=build_dir drivers/gpu/drm/ -j
The way how it chose static functions to mark:
[0] Unset CONFIG_WERROR in build_dir/.config.
To get display_mode_core.o without errors.
[1] Get a function list called by dml_prefetch_check().
$ sed -n '6268,6711p' drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c \
| sed -n -r 's/.*\W(\w+)\(.*/\1/p' | sort -u >/tmp/syms
[2] Get the non-inline function list.
Objdump won't show the symbols if they are inline functions.
$ make LLVM=1 O=build_dir drivers/gpu/drm/ -j
$ objdump -d build_dir/.../display_mode_core.o | \
./scripts/checkstack.pl x86_64 0 | \
grep -f /tmp/syms | cut -d' ' -f2- >/tmp/orig
[3] Get the full function list.
Append "-fno-inline" to `CFLAGS_.../display_mode_core.o` in
drivers/gpu/drm/amd/display/dc/dml2/Makefile.
$ make LLVM=1 O=build_dir drivers/gpu/drm/ -j
$ objdump -d build_dir/.../display_mode_core.o | \
./scripts/checkstack.pl x86_64 0 | \
grep -f /tmp/syms | cut -d' ' -f2- >/tmp/noinline
[4] Get the inline function list.
If a symbol only in /tmp/noinline but not in /tmp/orig, it is a good
candidate to mark noinline.
$ diff /tmp/orig /tmp/noinline
Chosen functions and their stack sizes:
CalculateBandwidthAvailableForImmediateFlip [display_mode_core.o]:144
CalculateExtraLatency [display_mode_core.o]:176
CalculateTWait [display_mode_core.o]:64
CalculateVActiveBandwithSupport [display_mode_core.o]:112
set_calculate_prefetch_schedule_params [display_mode_core.o]:48
CheckGlobalPrefetchAdmissibility [dml2_core_dcn4_calcs.o]:544
calculate_bandwidth_available [dml2_core_dcn4_calcs.o]:320
calculate_vactive_det_fill_latency [dml2_core_dcn4_calcs.o]:272
CalculateDCFCLKDeepSleep [dml2_core_dcn4_calcs.o]:208
CalculateODMMode [dml2_core_dcn4_calcs.o]:208
CalculateOutputLink [dml2_core_dcn4_calcs.o]:176
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[nathan: Fix conflicts in dml2_core_dcn4_calcs.c]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 37a0cff455 ]
Some of the warnings need to be reordered between these two functions
in order to be correct. This has happened multiple times.
Merging them solves this problem once and for all.
Fixes: d6667f0ddf ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260107152059.3048329-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 969faea4e9 ]
Pass character "0" rather than NULL terminator to properly format
queue restoration SMI events. Currently, the NULL terminator precedes
the newline character that is intended to delineate separate events
in the SMI event buffer, which can break userspace parsers.
Signed-off-by: Brian Kocoloski <brian.kocoloski@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6e7143e5e6)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3886b198bd ]
[why]
need to enable APG_CLOCK_ENABLE enable first
also need to wake up az from D3 before access az block
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bf5e396957)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7074045437 ]
After an innocuous optimization change in clang-22, allmodconfig (which
enables CONFIG_KASAN and CONFIG_WERROR) breaks with:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1724:6: error: stack frame size (3144) exceeds limit (3072) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
1724 | void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
With clang-21, this function was already pretty close to the existing
limit of 3072 bytes.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1724:6: error: stack frame size (2904) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
1724 | void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
A similar situation occurred in dml2, which was resolved by
commit e4479aecf6 ("drm/amd/display: Increase sanitizer frame larger
than limit when compile testing with clang") by increasing the limit for
clang when compile testing with certain sanitizer enabled, so that
allmodconfig (an easy testing target) continues to work.
Apply that same change to the dml folder to clear up the warning for
allmodconfig, unbreaking the build.
Closes: https://github.com/ClangBuiltLinux/linux/issues/2135
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 25314b453c)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 820ccf8cb2 ]
Currently, there are several files in drm/amd/display that aim to have a
higher -Wframe-larger-than value to avoid instances of that warning with
a lower value from the user's configuration. However, with the way that
it is currently implemented, it does not respect the user's request via
CONFIG_FRAME_WARN for a higher stack frame limit, which can cause pain
when new instances of the warning appear and break the build due to
CONFIG_WERROR.
Adjust the logic to switch from a hard coded -Wframe-larger-than value
to only using the value as a minimum clamp and deferring to the
requested value from CONFIG_FRAME_WARN if it is higher.
Suggested-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Closes: https://lore.kernel.org/2025013003-audience-opposing-7f95@gregkh/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 7074045437 ("drm/amd/display: Apply e4479aecf6 to dml")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7329417fc9 ]
On a 32-bit ARM system, the audio_decoder struct ends up being too large
for dp_retrain_link_dp_test.
link_dp_cts.c:157:1: error: the frame size of 1328 bytes is larger than
1280 bytes [-Werror=frame-larger-than=]
This is mitigated by shrinking the members of the struct and avoids
having to deal with dynamic allocation.
feed_back_divider is assigned but otherwise unused. Remove both.
pixel_repetition looks like it should be a bool since it's only ever
assigned to 1. But there are checks for 2 and 4. Reduce to uint8_t.
Remove ss_percentage_divider. Unused.
Shrink refresh_rate as it gets assigned to at most a 3 digit integer
value.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3849efdc78)
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 95d0883ac8 upstream.
This patch ensures the gt will be awake for the entire duration
of the resume sequences until GuCRC takes over and GT-C6 gets
re-enabled.
Before suspending GT-C6 is kept enabled, but upon resume, GuCRC
is not yet alive to properly control the exits and some cases of
instability and corruption related to GT-C6 can be observed.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4037
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4037
Link: https://lore.kernel.org/r/20250827000633.1369890-3-x.wang@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1313351e71 upstream.
Move forcewake_get() into xe_gt_idle_enable_c6() to streamline the
code and make it easier to use.
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250827000633.1369890-2-x.wang@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19158c7332 upstream.
clockInfo[] is a generic uchar pointer to variable sized structures
which vary from ASIC to ASIC.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4374
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dc135aa735)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ddd3bb4b1 upstream.
Jump to the existing dev_put label when devm_request_irq() fails
so drm_dev_put() and of_reserved_mem_device_release() run
instead of returning early and leaking resources.
Found via static analysis and code review.
Fixes: bed41005e6 ("drm/pl111: Initial drm/kms driver for pl111")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251211123345.2392065-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72d7f45736 upstream.
[Why]
Query for VPE block_type and ip_count is missing.
[How]
Add VPE case in ip_block_type and hw_ip_count query.
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a6ea0a430a)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8defb4f081 ]
Otherwise userspace may be fooled into believing it has a reserved VMID
when in reality it doesn't, ultimately leading to GPU hangs when SPM is
used.
Fixes: 80e709ee6e ("drm/amdgpu: add option params to enforce process isolation between graphics and compute")
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ adapted 3-argument amdgpu_vmid_alloc_reserved(adev, vm, vmhub) call to 2-argument version and added separate error check to preserve reserved_vmid tracking logic. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 576c930e5e ]
The shmem layer zeroes out the new pages using cached mappings, and if
we don't CPU-flush we might leave dirty cachelines behind, leading to
potential data leaks and/or asynchronous buffer corruption when dirty
cachelines are evicted.
Fixes: 8a1cc07578 ("drm/panthor: Add GEM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251107171214.1186299-1-boris.brezillon@collabora.com
[Harshit: Resolve conflicts due to missing commit: fe69a39180
("drm/panthor: Fix UAF in panthor_gem_create_with_handle() debugfs
code") in 6.12.y]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83cbb4d33d ]
Add a mechanism for DisplayID specific quirks, and add the first quirk
to ignore DisplayID section checksum errors.
It would be quite inconvenient to pass existing EDID quirks from
drm_edid.c for DisplayID parsing. Not all places doing DisplayID
iteration have the quirks readily available, and would have to pass it
in all places. Simply add a separate array of DisplayID specific EDID
quirks. We do end up checking it every time we iterate DisplayID blocks,
but hopefully the number of quirks remains small.
There are a few laptop models with DisplayID checksum failures, leading
to higher refresh rates only present in the DisplayID blocks being
ignored. Add a quirk for the panel in the machines.
Reported-by: Tiago Martins Araújo <tiago.martins.araujo@gmail.com>
Closes: https://lore.kernel.org/r/CACRbrPGvLP5LANXuFi6z0S7XMbAG4X5y2YOLBDxfOVtfGGqiKQ@mail.gmail.com
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14703
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Tiago Martins Araújo <tiago.martins.araujo@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/c04d81ae648c5f21b3f5b7953f924718051f2798.1761681968.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b991ad8dc upstream.
These objects are meant to be used by the GPU firmware or by the PM unit
within the GPU, in which case they may contain physical addresses.
This adds a layer of protection against exposing potentially exploitable
information outside of the driver.
Fixes: ff5f643de0 ("drm/imagination: Add GEM and VM related code")
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251208-no-export-pm-fw-obj-v1-1-83ab12c61693@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 560271e10b upstream.
Since we recently started warning about uses of this function after the
atomic check phase completes, we've started getting warnings about this in
nouveau. It appears a misplaced drm_atomic_get_crtc_state() call has been
hiding in our .prepare_fb callback for a while.
So, fix this by adding a new nv50_head_atom_get_new() function and use that
in our .prepare_fb callback instead.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: 1590700d94 ("drm/nouveau/kms/nv50-: split each resource type into their own source files")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patch.msgid.link/20251211190256.396742-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fe2bd1954 upstream.
Initialize the eb.vma array with values of 0 when the eb structure is
first set up. In particular, this sets the eb->vma[i].vma pointers to
NULL, simplifying cleanup and getting rid of the bug described below.
During the execution of eb_lookup_vmas(), the eb->vma array is
successively filled up with struct eb_vma objects. This process includes
calling eb_add_vma(), which might fail; however, even in the event of
failure, eb->vma[i].vma is set for the currently processed buffer.
If eb_add_vma() fails, eb_lookup_vmas() returns with an error, which
prompts a call to eb_release_vmas() to clean up the mess. Since
eb_lookup_vmas() might fail during processing any (possibly not first)
buffer, eb_release_vmas() checks whether a buffer's vma is NULL to know
at what point did the lookup function fail.
In eb_lookup_vmas(), eb->vma[i].vma is set to NULL if either the helper
function eb_lookup_vma() or eb_validate_vma() fails. eb->vma[i+1].vma is
set to NULL in case i915_gem_object_userptr_submit_init() fails; the
current one needs to be cleaned up by eb_release_vmas() at this point,
so the next one is set. If eb_add_vma() fails, neither the current nor
the next vma is set to NULL, which is a source of a NULL deref bug
described in the issue linked in the Closes tag.
When entering eb_lookup_vmas(), the vma pointers are set to the slab
poison value, instead of NULL. This doesn't matter for the actual
lookup, since it gets overwritten anyway, however the eb_release_vmas()
function only recognizes NULL as the stopping value, hence the pointers
are being set to NULL as they go in case of intermediate failure. This
patch changes the approach to filling them all with NULL at the start
instead, rather than handling that manually during failure.
Reported-by: Gangmin Kim <km.kim1503@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15062
Fixes: 544460c338 ("drm/i915: Multi-BB execbuf")
Cc: stable@vger.kernel.org # 5.16.x
Signed-off-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251216180900.54294-2-krzysztof.niemiec@intel.com
(cherry picked from commit 08889b706d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88733a0b64 upstream.
It is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in a
single place the check is missing.
Also use convenient locals instead of phys_enc->* where available.
Cc: stable@vger.kernel.org
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/693860/
Link: https://lore.kernel.org/r/20251211093630.171014-1-kniv@yandex-team.ru
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe3ccd2413 upstream.
When imported dma-bufs are destroyed, TTM is not fully
individualizing the dma-resv, but it *is* copying the fences that
need to be waited for before declaring idle. So in the case where
the bo->resv != bo->_resv we can still drop the preempt-fences, but
make sure we do that on bo->_resv which contains the fence-pointer
copy.
In the case where the copying fails, bo->_resv will typically not
contain any fences pointers at all, so there will be nothing to
drop. In that case, TTM would have ensured all fences that would
have been copied are signaled, including any remaining preempt
fences.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: fa0af721bd ("drm/ttm: test private resv obj on release/destroy")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251217093441.5073-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 425fe550fb)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80f9c601d9 upstream.
msleep is not very accurate in terms of how long it actually sleeps,
whereas usleep_range is precise. Replace the timeslice sleep for
long-running workloads with the more accurate usleep_range to avoid
jitter if the sleep period is less than 20ms.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-3-matthew.brost@intel.com
(cherry picked from commit ca415c4d4c)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f0f404bd2 upstream.
A 10ms timeslice for long-running workloads is far too long and causes
significant jitter in benchmarks when the system is shared. Adjust the
value to 5ms for preempt-fencing VMs, as the resume step there is quite
costly as memory is moved around, and set it to zero for pagefault VMs,
since switching back to pagefault mode after dma-fence mode is
relatively fast.
Also change min_run_period_ms to 'unsiged int' type rather than 's64' as
only positive values make sense.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-2-matthew.brost@intel.com
(cherry picked from commit 33a5abd9a6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 449bcd5d45 upstream.
Some Xe bos are allocated with extra backing-store for the CCS
metadata. It's never been the intention to share the CCS metadata
when exporting such bos as dma-buf. Don't include it in the
dma-buf sg-table.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251209204920.224374-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit a4ebfb9d95)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6cb31fba13 upstream.
Unlike the original, deleted Matrox mga driver, the new mgag200 driver
has the XRGB frame-buffer byte swapped on big-endian "RISC"
systems. Fix by enabling byte swapping "PowerPC" OPMODE for any
__BIG_ENDIAN config.
Fixes: 414c453106 ("mgag200: initial g200se driver (v2)")
Signed-off-by: René Rebe <rene@exactco.de>
Cc: stable@kernel.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251208.141827.965103015954471168.rene@exactco.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 491adc6a0f upstream.
It is possible for a BO to exist that is not currently associated with a
resource, e.g. because it has been evicted.
When devcoredump tries to read the contents of all BOs for dumping, we need
to expect this as well -- in this case, ENODATA is recorded instead of the
buffer contents.
Fixes: 7d08df5d0b ("drm/ttm: Add ttm_bo_access")
Fixes: 09ac4fcb3f ("drm/ttm: Implement vm_operations_struct.access v2")
Cc: stable <stable@kernel.org>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6271
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251013161241.709916-1-Simon.Richter@hogyros.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
