[ Upstream commit f514248727 ]
fsl_xcvr_activate_ctl() has
lockdep_assert_held(&card->snd_card->controls_rwsem),
but fsl_xcvr_mode_put() calls it without acquiring this lock.
Other callers of fsl_xcvr_activate_ctl() in fsl_xcvr_startup() and
fsl_xcvr_shutdown() properly acquire the lock with down_read()/up_read().
Add the missing down_read()/up_read() calls around fsl_xcvr_activate_ctl()
in fsl_xcvr_mode_put() to fix the lockdep assertion and prevent potential
race conditions when multiple userspace threads access the control.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260202174112.2018402-1-n7l8m4@u.northwestern.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e77a4081d7 ]
The load detection process for 3-pole jacks requires slightly
updated reference values to ensure an accurate result. Update
the code to apply different tunings for the 3-pole and 4-pole
cases. This also updates the thresholds overall so update the
relevant comments to match.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260130150927.2964664-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 611c7d2262 ]
Fix the missing mic on HP 200 G2a 16 by adding quirk with the
board ID 8EE4
Signed-off-by: Dirk Su <dirk.su@canonical.com>
Link: https://patch.msgid.link/20260129065038.39349-1-dirk.su@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b641122d3 ]
Add DMI entry for Huawei Matebook D (BOD-WXX9) with HEADPHONE_GPIO
and DMIC quirks.
This device has ES8336 codec with:
- GPIO 16 (headphone-enable) for headphone amplifier control
- GPIO 17 (speakers-enable) for speaker amplifier control
- GPIO 269 for jack detection IRQ
- 2-channel DMIC
Hardware investigation shows that both GPIO 16 and 17 are required
for proper audio routing, as headphones and speakers share the same
physical output (HPOL/HPOR) and are separated only via amplifier
enable signals.
RFC: Seeking advice on GPIO control issue:
GPIO values change in driver (gpiod_get_value() shows logical value
changes) but not physically (debugfs gpio shows no change). The same
gpiod_set_value_cansleep() calls work correctly in probe context with
msleep(), but fail when called from DAPM event callbacks.
Context information from diagnostics:
- in_atomic=0, in_interrupt=0, irqs_disabled=0
- Process context: pipewire
- GPIO 17 (speakers): changes in driver, no physical change
- GPIO 16 (headphone): changes in driver, no physical change
In Windows, audio switching works without visible GPIO changes,
suggesting possible ACPI/firmware involvement.
Any suggestions on how to properly control these GPIOs from DAPM
events would be appreciated.
Signed-off-by: Tagir Garaev <tgaraev653@gmail.com>
Link: https://patch.msgid.link/20260201121728.16597-1-tgaraev653@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 630fbc6e87 ]
If it play a 5s above silence media stream, it will cause silence
detection trigger.
Speaker will make no sound when you use another app to play a stream.
Add this patch will solve this issue.
GPIO2: Mute Hotkey GPIO3: Mic Mute LED
Enable this will turn on hotkey and LED support.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/f4929e137a7949238cc043d861a4d9f8@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dd0fdc908 ]
ASP_TX5 was incorrectly mapped to a channel value of 3 corrects,
the channel value of 4.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Link: https://patch.msgid.link/20260115192523.1335742-2-rriveram@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 018b211b1d ]
Add ASUS ExpertBook PM1503CDA to the DMI quirks table to enable
internal DMIC support via the ACP6x machine driver.
Signed-off-by: Anatolii Shirykalov <pipocavsobake@gmail.com>
Link: https://patch.msgid.link/20260119145618.3171435-1-pipocavsobake@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b48fe9af1e ]
Add a PCI quirk to enable microphone detection on the headphone jack of
TongFang X6AR55xU devices.
Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260119151626.35481-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1aaedafb21 upstream.
Add a PCI quirk to enable microphone detection on the headphone jack of
TongFang X6AR55xU devices.
The former quirk entry did not acomplish this and is removed.
Fixes: b48fe9af1e ("ALSA: hda/realtek: Fix headset mic for TongFang X6AR55xU")
Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260123221233.28273-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 124bdc6ecc ]
When the support for the Sound Blaster X-Fi Surround 5.1 Pro was added,
the existing logic for the X-Fi Surround 5.1 in snd_audigy2nx_led_put()
was broken due to missing *else* before the added *if*: snd_usb_ctl_msg()
became incorrectly called twice and an error from first snd_usb_ctl_msg()
call ignored. As the added snd_usb_ctl_msg() call was totally identical
to the existing one for the "plain" X-Fi Surround 5.1, just merge those
two *if* statements while fixing the broken logic...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 7cdd8d7313 ("ALSA: usb-audio - Add support for USB X-Fi S51 Pro")
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Link: https://patch.msgid.link/20260203161558.18680-1-s.shtylyov@auroraos.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64e0924ed3 ]
The amp/speakers on the Lenovo Yoga Book 9i 13IRU8 laptop aren't
fully powered up, resulting in horrible tinny sound by default.
The kernel has an existing quirk for PCI SSID 0x17aa3843 which
matches this machine and several others. The quirk applies the
ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP fixup, however the fixup does not
work on this machine.
This patch modifies the existing quirk by adding a check for the
subsystem ID 0x17aa3881. If present, ALC287_FIXUP_TAS2781_I2C will
be applied instead of ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP. With this
change the TAS2781 amp is powered up, firmware is downloaded and
recognised by HDA/SOF - i.e. all is good, and we can boogie.
Code is re-used from alc298_fixup_lenovo_c940_duet7(), which fixes a
similar problem with two other Lenovo laptops.
Cross checked against ALSA cardinfo database for potential clashes.
Tested against 6.18.5 kernel built with Arch Linux default options.
Tested in HDA mode and SOF mode.
Note: Possible further work required to address quality of life issues
caused by the firmware's agressive power saving, and to improve ALSA
control mappings.
Signed-off-by: Martin Hamilton <m@martinh.net>
Link: https://patch.msgid.link/20260122-alc269-yogabook9i-fixup-v1-1-a6883429400f@martinh.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b48fe9af1e ]
Add a PCI quirk to enable microphone detection on the headphone jack of
TongFang X6AR55xU devices.
Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260119151626.35481-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d89aad92cf ]
When scanning for the reset pin, we could get an -EPROBE_DEFER.
The driver would assume that no reset pin had been defined,
which would mean that the chip would never be powered.
Now we both respect any error we get from devm_gpiod_get_optional.
We also now properly report the missing GPIO definition when
'gpio_reset' is NULL.
Signed-off-by: Dimitrios Katsaros <patcherwork@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-3-8f7ecec525c8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e29db1b08 ]
Add DMI match for ASUSTeK COMPUTER INC. M6500RE to enable the
internal microphone.
Signed-off-by: Radhi Bajahaw <bajahawradhi@gmail.com>
Link: https://patch.msgid.link/20260112203814.155-1-bajahawradhi@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22a507d768 ]
Even the device node don't exist, the graph_util_parse_link_direction()
will overwrite the playback_only and capture_only to be zero. Which
cause the playback_only and capture_only are not correct, so check device
node exist or not before update the value.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20251229090432.3964848-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b577d214f ]
The davinci_evm_probe() function calls of_parse_phandle() to acquire
device nodes for "ti,audio-codec" and "ti,mcasp-controller". These
functions return device nodes with incremented reference counts.
However, in several error paths (e.g., when the second of_parse_phandle(),
snd_soc_of_parse_card_name(), or devm_snd_soc_register_card() fails),
the function returns directly without releasing the acquired nodes,
leading to reference leaks.
This patch adds an error handling path 'err_put' to properly release
the device nodes using of_node_put() and clean up the pointers when
an error occurs.
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Link: https://patch.msgid.link/20260107154836.1521-2-qikeyu2017@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ed7a28225 ]
HP Laptop 15s-eq1xxx with ALC236 codec does not enable the
mute LED automatically. This patch adds a quirk entry for
subsystem ID 0x8706 using the ALC236_FIXUP_HP_MUTE_LED_COEFBIT2
fixup, enabling correct mute LED behavior.
Signed-off-by: Ruslan Krupitsa <krupitsarus@outlook.com>
Link: https://patch.msgid.link/AS8P194MB112895B8EC2D87D53A876085BBBAA@AS8P194MB1128.EURP194.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 826af7fa62 upstream.
The PCM trigger callback of aloop driver tries to check the PCM state
and stop the stream of the tied substream in the corresponding cable.
Since both check and stop operations are performed outside the cable
lock, this may result in UAF when a program attempts to trigger
frequently while opening/closing the tied stream, as spotted by
fuzzers.
For addressing the UAF, this patch changes two things:
- It covers the most of code in loopback_check_format() with
cable->lock spinlock, and add the proper NULL checks. This avoids
already some racy accesses.
- In addition, now we try to check the state of the capture PCM stream
that may be stopped in this function, which was the major pain point
leading to UAF.
Reported-by: syzbot+5f8f3acdee1ec7a7ef7b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/69783ba1.050a0220.c9109.0011.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260203141003.116584-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9210f5ff63 upstream.
imx-card currently sets the slot width to the physical sample width
for I2S links. This breaks controllers that use fixed-width slots
(e.g. 32-bit FIFO words), causing the unused bits in the slot to
contain undefined data when playing 16-bit streams.
Do not override the slot width in the machine driver and let the CPU
DAI select an appropriate default instead. This matches the behavior
of simple-audio-card and avoids embedding controller-specific policy
in the machine driver.
On an i.MX8MP-based board using SAI as the I2S master with 32-bit slots,
playing 16-bit audio resulted in spurious frequencies and an incorrect
SAI data waveform, as the slot width was forced to 16 bits. After this
change, audio artifacts are eliminated and the 16-bit samples correctly
occupy the first half of the 32-bit slot, with the remaining bits padded
with zeroes.
Cc: stable@vger.kernel.org
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20260118205030.1532696-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 213c4e5126 ]
The headphone GPIO should be set to the inverse of speaker_en.
When speakers are enabled, headphones should be disabled and vice versa.
Currently both GPIOs are set to the same value (speaker_en), causing
audio to play through both speakers and headphones simultaneously
when headphones are plugged in.
Tested on Huawei Matebook (BOD-WXX9) with ES8336 codec.
Fixes: 6e1ff1459e ("ASoC: Intel: sof_es8336: support a separate gpio to control headphone")
Signed-off-by: Tagir Garaev <tgaraev653@gmail.com>
Link: https://patch.msgid.link/20260121152435.101698-1-tgaraev653@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 930e69757b upstream.
When snd_usb_create_mixer() fails, snd_usb_mixer_free() frees
mixer->id_elems but the controls already added to the card still
reference the freed memory. Later when snd_card_register() runs,
the OSS mixer layer calls their callbacks and hits a use-after-free read.
Call trace:
get_ctl_value+0x63f/0x820 sound/usb/mixer.c:411
get_min_max_with_quirks.isra.0+0x240/0x1f40 sound/usb/mixer.c:1241
mixer_ctl_feature_info+0x26b/0x490 sound/usb/mixer.c:1381
snd_mixer_oss_build_test+0x174/0x3a0 sound/core/oss/mixer_oss.c:887
...
snd_card_register+0x4ed/0x6d0 sound/core/init.c:923
usb_audio_probe+0x5ef/0x2a90 sound/usb/card.c:1025
Fix by calling snd_ctl_remove() for all mixer controls before freeing
id_elems. We save the next pointer first because snd_ctl_remove()
frees the current element.
Fixes: 6639b6c236 ("[ALSA] usb-audio - add mixer control notifications")
Cc: stable@vger.kernel.org
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Berk Cem Goksel <berkcgoksel@gmail.com>
Link: https://patch.msgid.link/20260120102855.7300-1-berkcgoksel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f5c69f72e upstream.
The scarlett2_usb_get_config() function has a logic error in the
endianness conversion code that can cause buffer overflows when
count > 1.
The code checks `if (size == 2)` where `size` is the total buffer size in
bytes, then loops `count` times treating each element as u16 (2 bytes).
This causes the loop to access `count * 2` bytes when the buffer only
has `size` bytes allocated.
Fix by checking the element size (config_item->size) instead of the
total buffer size. This ensures the endianness conversion matches the
actual element type.
Fixes: ac34df733d ("ALSA: usb-audio: scarlett2: Update get_config to do endian conversion")
Cc: stable@vger.kernel.org
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Link: https://patch.msgid.link/20260117012706.1715574-1-samasth.norway.ananda@oracle.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61006c540c upstream.
In the audio mixer handling code of ctxfi driver, the conf field is
used as a kind of loop index, and it's referred in the index callbacks
(amixer_index() and sum_index()).
As spotted recently by fuzzers, the current code causes OOB access at
those functions.
| UBSAN: array-index-out-of-bounds in /build/reproducible-path/linux-6.17.8/sound/pci/ctxfi/ctamixer.c:347:48
| index 8 is out of range for type 'unsigned char [8]'
After the analysis, the cause was found to be the lack of the proper
(re-)initialization of conj field.
This patch addresses those OOB accesses by adding the proper
initializations of the loop indices.
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Karsten Hohmeier <linux@hohmatik.de>
Closes: https://bugs.debian.org/1121535
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/aSk8KJI35H7gFru6@eldamar.lan/
Link: https://patch.msgid.link/20260119133212.189129-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6b971191fc ]
On at least the HyperX Cloud III, the range is 18944 (-18944 -> 0 in
steps of 1), so the original check for 255 steps is definitely obsolete.
Let's give ourselves a little more headroom before we emit a warning.
Fixes: 80acefff3b ("ALSA: usb-audio - Add volume range check and warn if it too big")
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: linux-sound@vger.kernel.org
Signed-off-by: Arun Raghavan <arunr@valvesoftware.com>
Link: https://patch.msgid.link/20260116225804.3845935-1-arunr@valvesoftware.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 29d71b8a5a upstream.
The soundwire update_status() callback may be called multiple times with
the same ATTACHED status but initialisation should only be done when
transitioning from UNATTACHED to ATTACHED.
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Cc: stable@vger.kernel.org # 5.6
Cc: Srinivas Kandagatla <srini@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260102111413.9605-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49aadf830e upstream.
The soundwire update_status() callback may be called multiple times with
the same ATTACHED status but initialisation should only be done when
transitioning from UNATTACHED to ATTACHED.
This avoids repeated initialisation of the codecs during boot of
machines like the Lenovo ThinkPad X13s:
[ 11.614523] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.618022] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.621377] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.624065] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.631382] wsa883x-codec sdw:1:0:0217:0202:00:2: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.634424] wsa883x-codec sdw:1:0:0217:0202:00:2: WSA883X Version 1_1, Variant: WSA8835_V2
Fixes: 43b8c7dc85 ("ASoC: codecs: add wsa883x amplifier support")
Cc: stable@vger.kernel.org # 6.0
Cc: Srinivas Kandagatla <srini@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260102111413.9605-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 46378ab9fc ]
The word length is the physical width of the channel slots. So the
hw_params would misconfigure when format width and physical width
doesn't match. Like S24_LE which has data width of 24 bits but physical
width of 32 bits. So if using asymmetric formats you will get a lot of
noise.
Fixes: 689c7655b5 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Signed-off-by: Emil Svendsen <emas@bang-olufsen.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-4-8f7ecec525c8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be7664c81d ]
The "snd_soc_component" in "adcx140_priv" was only used once but never
set. It was only used for reaching "dev" which is already present in
"adcx140_priv".
Fixes: 4e82971f7b ("ASoC: tlv320adcx140: Add a new kcontrol")
Signed-off-by: Emil Svendsen <emas@bang-olufsen.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-2-8f7ecec525c8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 390caeed08 ]
The CS42L43 codec's load detection can return different impedance values
that map to either HEADPHONE or LINEOUT jack types. However, the
soc_jack_pins array only maps SND_JACK_HEADPHONE to the "Headphone" DAPM
pin, not SND_JACK_LINEOUT.
When headphones are detected with an impedance that maps to LINEOUT
(such as impedance value 0x2), the driver reports SND_JACK_LINEOUT.
Since this doesn't match the jack pin mask, the "Headphone" DAPM pin
is not activated, and no audio is routed to the headphone outputs.
Fix by adding SND_JACK_LINEOUT to the Headphone pin mask, so that both
headphone and line-out detection properly enable the headphone output
path.
This fixes no audio output on devices like the Lenovo ThinkPad P16 Gen 3
where headphones are detected with LINEOUT impedance.
Fixes: d74bad3b74 ("ASoC: intel: sof_sdw_cs42l43: Create separate jacks for hp and mic")
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Cole Leavitt <cole@unwrap.rs>
Link: https://patch.msgid.link/20260114025518.28519-1-cole@unwrap.rs
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5e96e54ec ]
Set gpiochip parent to the struct device of the dummy GPIO driver
so that the software node will be associated with the GPIO chip.
The recent commit e5d527be7e ("gpio: swnode: don't use the
swnode's name as the key for GPIO lookup") broke cirrus_scodec_test,
because the software node no longer gets associated with the GPIO
driver by name.
Instead, setting struct gpio_chip.parent to the owning struct device
will find the node using a normal fwnode lookup.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test")
Link: https://patch.msgid.link/20260113130954.574670-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 120f3e6ff7 upstream.
The soundwire update_status() callback may be called multiple times with
the same ATTACHED status but initialisation should only be done when
transitioning from UNATTACHED to ATTACHED.
Fix the inverted hw_init flag which was set to false instead of true
after initialisation which defeats its purpose and may result in
repeated unnecessary initialisation.
Similarly, the initial state of the flag was also inverted so that the
codec would only be initialised and brought out of regmap cache only
mode if its status first transitions to UNATTACHED.
Fixes: aa21a7d4f6 ("ASoC: codecs: wsa884x: Add WSA884x family of speakers")
Cc: stable@vger.kernel.org # 6.5
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260102111413.9605-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 161a0c617a upstream.
When config table entries don't match with the device to be probed,
currently we fall back to SND_INTEL_DSP_DRIVER_ANY, which means to
allow any drivers to bind with it.
This was set so with the assumption (or hope) that all controller
drivers should cover the devices generally, but in practice, this
caused a problem as reported recently. Namely, when a specific
kconfig for SOF isn't set for the modern Intel chips like Alderlake,
a wrong driver (AVS) got probed and failed. This is because we have
entries like:
#if IS_ENABLED(CONFIG_SND_SOC_SOF_ALDERLAKE)
/* Alder Lake / Raptor Lake */
{
.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
.device = PCI_DEVICE_ID_INTEL_HDA_ADL_S,
},
....
#endif
so this entry is effective only when CONFIG_SND_SOC_SOF_ALDERLAKE is
set. If not set, there is no matching entry, hence it returns
SND_INTEL_DSP_DRIVER_ANY as fallback. OTOH, if the kconfig is set, it
explicitly falls back to SND_INTEL_DSP_DRIVER_LEGACY when no DMIC or
SoundWire is found -- that was the working scenario. That being said,
the current setup may be broken for modern Intel chips that are
supposed to work with either SOF or legacy driver when the
corresponding kconfig were missing.
For addressing the problem above, this patch changes the fallback
driver to the legacy driver, i.e. return SND_INTEL_DSP_DRIVER_LEGACY
type as much as possible. When CONFIG_SND_HDA_INTEL is also disabled,
the fallback is set to SND_INTEL_DSP_DRIVER_ANY type, just to be sure.
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/all/20251014034156.4480-1-safinaskar@gmail.com/
Tested-by: Askar Safin <safinaskar@gmail.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251210131553.184404-1-tiwai@suse.de
Signed-off-by: Askar Safin <safinaskar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 90ed688792 ]
Drivers does cache sync during runtime resume, setting all writable
registers. Not all writable registers are set in cache default, resulting
in the erorr message:
fsl-sai 30c30000.sai: using zero-initialized flat cache, this may cause
unexpected behavior
Fix this by adding missing writable register defaults.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20251216102246.676181-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2cb8ef037 ]
Add a DMI quirk for the Honor MagicBook X16 2025 laptop
fixing the issue where the internal microphone was
not detected.
Signed-off-by: Andrew Elantsev <elantsew.andrew@gmail.com>
Link: https://patch.msgid.link/20251210203800.142822-1-elantsew.andrew@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 830988b6cf ]
If ac97_add_adapter() fails, put_device() is the correct way to drop
the device reference. kfree() is not required.
Add kfree() if idr_alloc() fails and in ac97_adapter_release() to do
the cleanup.
Found by code review.
Fixes: 74426fbff6 ("ALSA: ac97: add an ac97 bus")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Link: https://patch.msgid.link/20251219162845.657525-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 57d508b5f7 ]
'version' is an enum, thus cast of pointer on 64-bit compile test with
clang W=1 causes:
rockchip_pdm.c:583:17: error: cast to smaller integer type 'enum rk_pdm_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
This was already fixed in commit 49a4a8d126 ("ASoC: rockchip: Fix
Wvoid-pointer-to-enum-cast warning") but then got bad in
commit 9958d85968 ("ASoC: Use device_get_match_data()").
Discussion on LKML also pointed out that 'uintptr_t' is not the correct
type and either 'kernel_ulong_t' or 'unsigned long' should be used,
with several arguments towards the latter [1].
Link: https://lore.kernel.org/r/CAMuHMdX7t=mabqFE5O-Cii3REMuyaePHmqX+j_mqyrn6XXzsoA@mail.gmail.com/ [1]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251203141644.106459-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bae7beda1 ]
The strm->sample_width is not filled during rz_ssi_dai_hw_params(). This
wrong value is used for caching sample_width in struct hw_params_cache.
Fix this issue by replacing 'strm->sample_width'->'params_width(params)'
in rz_ssi_dai_hw_params(). After this drop the variable sample_width
from struct rz_ssi_stream as it is unused.
Cc: stable@kernel.org
Fixes: 4f8cd05a43 ("ASoC: sh: rz-ssi: Add full duplex support")
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114073709.4376-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bcba172793 ]
For some reason we endedup allocating sdw_stream_runtime for every cpu dai,
this has two issues.
1. we never set snd_soc_dai_set_stream for non soundwire dai, which
means there is no way that we can free this, resulting in memory leak
2. startup and shutdown callbacks can be called without
hw_params callback called. This combination results in memory leak
because machine driver sruntime array pointer is only set in hw_params
callback.
Fix this by
1. adding a helper function to get sdw_runtime for substream
which can be used by shutdown callback to get hold of sruntime to free.
2. only allocate sdw_runtime for soundwire dais.
Fixes: d32bac9cb0 ("ASoC: qcom: Add helper for allocating Soundwire stream runtime")
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Steev Klimaszewski <threeway@gmail.com> # Thinkpad X13s
Link: https://patch.msgid.link/20251022143349.1081513-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dc90bbefa7 ]
In the existing definition of sdw_stream_runtime, the 'type' member is
never set and defaults to PCM. To prepare for the BPT/BRA support, we
need to special-case streams and make use of the 'type'.
No functional change for now, the implicit PCM type is now explicit.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: shumingf@realtek.com
Link: https://lore.kernel.org/r/20250227140615.8147-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: bcba172793 ("ASoC: qcom: sdw: fix memory leak for sdw_stream_runtime")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 52a525011c ]
The full duplex audio starts with half duplex mode and then switch to
full duplex mode (another FIFO reset) when both playback/capture
streams available leading to random audio left/right channel swap
issue. Fix this channel swap issue by detecting the full duplex
condition by populating struct dup variable in startup() callback
and synchronize starting both the play and capture at the same time
in rz_ssi_start().
Cc: stable@kernel.org
Fixes: 4f8cd05a43 ("ASoC: sh: rz-ssi: Add full duplex support")
Co-developed-by: Tony Tang <tony.tang.ks@renesas.com>
Signed-off-by: Tony Tang <tony.tang.ks@renesas.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114073709.4376-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81c53b52de upstream.
DSP expects the periods to be aligned to fragment sizes, currently
setting up to hw constriants on periods bytes is not going to work
correctly as we can endup with periods sizes aligned to 32 bytes however
not aligned to fragment size.
Update the constriants to use fragment size, and also set at step of
10ms for period size to accommodate DSP requirements of 10ms latency.
Fixes: 2a9e92d371 ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
