[ Upstream commit ebf35d8f93 ]
Before sending the data via the mailbox to the hardware, to ensure
that the data accessed by the hardware is the most up-to-date,
a write barrier should be added before writing to the mailbox register.
The current memory barrier is placed after writing to the register,
the barrier order should be modified to be before writing to the register.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b85137caf ]
The hibernate resume sequence involves loading a resume kernel that is just
used for loading the hibernate image before shifting back to the existing
kernel.
During that hibernate resume sequence the resume kernel may have loaded
the ccp driver. If this happens the resume kernel will also have called
PSP_CMD_TEE_RING_INIT but it will never have called
PSP_CMD_TEE_RING_DESTROY.
This is problematic because the existing kernel needs to re-initialize the
ring. One could argue that the existing kernel should call destroy
as part of restore() but there is no guarantee that the resume kernel did
or didn't load the ccp driver. There is also no callback opportunity for
the resume kernel to destroy before handing back control to the existing
kernel.
Similar problems could potentially exist with the use of kdump and
crash handling. I actually reproduced this issue like this:
1) rmmod ccp
2) hibernate the system
3) resume the system
4) modprobe ccp
The resume kernel will have loaded ccp but never destroyed and then when
I try to modprobe it fails.
Because of these possible cases add a flow that checks the error code from
the PSP_CMD_TEE_RING_INIT call and tries to call PSP_CMD_TEE_RING_DESTROY
if it failed. If this succeeds then call PSP_CMD_TEE_RING_INIT again.
Fixes: f892a21f51 ("crypto: ccp - use generic power management")
Reported-by: Lars Francke <lars.francke@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/CAD-Ua_gfJnQSo8ucS_7ZwzuhoBRJ14zXP7s8b-zX3ZcxcyWePw@mail.gmail.com/
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260116041132.153674-6-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d95f87a65b ]
The ring destroy command needs to be used in multiple places. Split
out the code to a helper.
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260116041132.153674-5-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 7b85137caf ("crypto: ccp - Send PSP_CMD_TEE_RING_DESTROY when PSP_CMD_TEE_RING_INIT fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e599d7871 ]
tee_init_ring() only declares PSP dead if the command times out.
If there is any other failure it is still considered fatal though.
Set psp_dead for other failures as well.
Fixes: 949a0c8dd3 ("crypto: ccp - Move direct access to some PSP registers out of TEE")
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260116041132.153674-3-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccb679fdae ]
The starfive_aes_aead_do_one_req() function allocates rctx->adata with
kzalloc() but fails to free it if sg_copy_to_buffer() or
starfive_aes_hw_init() fails, which lead to memory leaks.
Since rctx->adata is unconditionally freed after the write_adata
operations, ensure consistent cleanup by freeing the allocation in these
earlier error paths as well.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 7467147ef9 ("crypto: starfive - Use dma for aes requests")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d43252b30 ]
When commit 0e1a4d427f ("crypto: caam: Unembed net_dev structure in
dpaa2") converted embedded net_device to dynamically allocated pointers,
it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in
dpaa2_dpseci_free() for error paths.
This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe
due to DPIO devices not being ready yet. The kernel's deferred probe
mechanism handles the retry successfully, but the netdevs allocated during
the failed probe attempt are never freed, resulting in kmemleak reports
showing multiple leaked netdev-related allocations all traced back to
dpaa2_caam_probe().
Fix this by preserving the CPU mask of allocated netdevs during setup and
using it for cleanup in dpaa2_dpseci_free(). This approach ensures that
only the CPUs that actually had netdevs allocated will be cleaned up,
avoiding potential issues with CPU hotplug scenarios.
Fixes: 0e1a4d427f ("crypto: caam: Unembed net_dev structure in dpaa2")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d3135057f ]
Since the number of devices is limited, and the number
of tfms may exceed the number of devices, to ensure that
tfms can be successfully allocated, support tfms
sharing the same device.
Fixes: e4d9d10ef4 ("crypto: hisilicon/trng - add support for PRNG")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc8ccab150 ]
snp_range_list is only used in __sev_snp_init_locked() in the SNP_INIT_EX
case, move the declaration there and add a __free() cleanup helper for it
instead of waiting until shutdown.
Fixes: 1ca5614b84 ("crypto: ccp: Add support to initialize the AMD-SP for SEV-SNP")
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ceac7fb89e ]
Modify the behavior of implicit SEV initialization in some of the
SEV ioctls to do both SEV initialization and shutdown and add
implicit SNP initialization and shutdown to some of the SNP ioctls
so that the change of SEV/SNP platform initialization not being
done during PSP driver probe time does not break userspace tools
such as sevtool, etc.
Prior to this patch, SEV has always been initialized before these
ioctls as SEV initialization is done as part of PSP module probe,
but now with SEV initialization being moved to KVM module load instead
of PSP driver probe, the implied SEV INIT actually makes sense and gets
used and additionally to maintain SEV platform state consistency
before and after the ioctl SEV shutdown needs to be done after the
firmware call.
It is important to do SEV Shutdown here with the SEV/SNP initialization
moving to KVM, an implicit SEV INIT here as part of the SEV ioctls not
followed with SEV Shutdown will cause SEV to remain in INIT state and
then a future SNP INIT in KVM module load will fail.
Also ensure that for these SEV ioctls both implicit SNP and SEV INIT is
done followed by both SEV and SNP shutdown as RMP table must be
initialized before calling SEV INIT if SNP host support is enabled.
Similarly, prior to this patch, SNP has always been initialized before
these ioctls as SNP initialization is done as part of PSP module probe,
therefore, to keep a consistent behavior, SNP init needs to be done
here implicitly as part of these ioctls followed with SNP shutdown
before returning from the ioctl to maintain the consistent platform
state before and after the ioctl.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: dc8ccab150 ("crypto: ccp - narrow scope of snp_range_list")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e750743962 ]
When all hardware queues are busy and no shareable queue,
new processes fail to apply for queues. To avoid affecting
tasks, support fallback mechanism when hardware queues are
unavailable.
Fixes: c16a70c1f2 ("crypto: hisilicon/sec - add new algorithm mode for AEAD")
Signed-off-by: Qi Tao <taoqi10@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19c2475ce1 ]
In the shared queue design, multiple tfms use same qp, and one qp
need to corresponds to multiple qp_ctx. So use tag to obtain the
req virtual address. Build a one-to-one relationship between tfm
and qp_ctx. finaly remove the old get_tag operation.
Fixes: 2bcf36348c ("crypto: hisilicon/zip - initialize operations about 'sqe' in 'acomp_alg.init'")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 624a6760bf ]
The size of the buffer in alloc_command_queues() is
curr->size + OTX_CPT_NEXT_CHUNK_PTR_SIZE, so used that length for
dma_free_coherent().
Fixes: 10b4f09491 ("crypto: marvell - add the Virtual Function driver for CPT")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 941676c30b ]
The size of the buffer in alloc_command_queues() is
curr->size + CPT_NEXT_CHUNK_PTR_SIZE, so used that length for
dma_free_coherent().
Fixes: c694b23329 ("crypto: cavium - Add the Virtual Function driver for CPT")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 994689b8f9 ]
Building the QAT driver with -Wmaybe-uninitialized triggers warnings in
qat_common/adf_pfvf_pf_proto.c. Specifically, the variables blk_type,
blk_byte, and byte_max may be used uninitialized in handle_blkmsg_req():
make M=drivers/crypto/intel/qat W=1 C=2 "KCFLAGS=-Werror" \
KBUILD_CFLAGS_KERNEL=-Wmaybe-uninitialized \
CFLAGS_MODULE=-Wmaybe-uninitialized
...
warning: ‘byte_max’ may be used uninitialized [-Wmaybe-uninitialized]
warning: ‘blk_type’ may be used uninitialized [-Wmaybe-uninitialized]
warning: ‘blk_byte’ may be used uninitialized [-Wmaybe-uninitialized]
Although the caller of handle_blkmsg_req() always provides a req.type
that is handled by the switch, the compiler cannot guarantee this.
Add a default case to the switch statement to handle an invalid req.type.
Fixes: 673184a2a5 ("crypto: qat - introduce support for PFVF block messages")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 14f86a1155 upstream.
With function virtio_crypto_skcipher_crypt_req(), there is already
virtqueue_kick() call with spinlock held in function
__virtio_crypto_skcipher_do_req(). Remove duplicated virtqueue_kick()
function call here.
Fixes: d79b5d0bbf ("crypto: virtio - support crypto engine framework")
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b505047ffc upstream.
When VM boots with one virtio-crypto PCI device and builtin backend,
run openssl benchmark command with multiple processes, such as
openssl speed -evp aes-128-cbc -engine afalg -seconds 10 -multi 32
openssl processes will hangup and there is error reported like this:
virtio_crypto virtio0: dataq.0:id 3 is not a head!
It seems that the data virtqueue need protection when it is handled
for virtio done notification. If the spinlock protection is added
in virtcrypto_done_task(), openssl benchmark with multiple processes
works well.
Fixes: fed93fb62e ("crypto: virtio - Handle dataq logic with tasklet")
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1562b1fb7e upstream.
The existing allocation of scatterlists in omap_crypto_copy_sg_lists()
was allocating an array of scatterlist pointers, not scatterlist objects,
resulting in a 4x too small allocation.
Use sizeof(*new_sg) to get the correct object size.
Fixes: 74ed87e7e7 ("crypto: omap - add base support library for common routines")
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5565a72b24 upstream.
OTX_CPT_UCODE_NAME_LENGTH limits the microcode name to 64 bytes. If a
user writes a string of exactly 64 characters, the original code used
'strlen(buf) > 64' to check the length, but then strscpy() copies only
63 characters before adding a NUL terminator, silently truncating the
copied string.
Fix this off-by-one error by using 'count' directly for the length check
to ensure long names are rejected early and copied without truncation.
Cc: stable@vger.kernel.org
Fixes: d9110b0b01 ("crypto: marvell - add support for OCTEON TX CPT engine")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4832930196 upstream.
The local variable 'i' is initialized with -EINVAL, but the for loop
immediately overwrites it and -EINVAL is never returned.
If no empty compression mode can be found, the function would return the
out-of-bounds index IAA_COMP_MODES_MAX, which would cause an invalid
array access in add_iaa_compression_mode().
Fix both issues by returning either a valid index or -EINVAL.
Cc: stable@vger.kernel.org
Fixes: b190447e0f ("crypto: iaa - Add compression mode management along with fixed mode")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 961ac9d97b ]
The restarting message from PF to VF is sent twice during AER error
handling: once from adf_error_detected() and again from
adf_disable_sriov().
This causes userspace subservices to shutdown unexpectedly when they
receive a duplicate restarting message after already being restarted.
Avoid calling adf_pf2vf_notify_restarting() and
adf_pf2vf_wait_for_restarting_complete() from adf_error_detected() so
that the restarting msg is sent only once from PF to VF.
Fixes: 9567d3dc76 ("crypto: qat - improve aer error reset handling")
Signed-off-by: Harshita Bhilwaria <harshita.bhilwaria@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Ravikumar PM <ravikumar.pm@intel.com>
Reviewed-by: Srikanth Thokala <srikanth.thokala@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7cf6e0b69b upstream.
As kcalloc() may fail, check its return value to avoid a NULL pointer
dereference when passing the buffer to rng->read(). On allocation
failure, log the error and return since test_len() returns void.
Fixes: 2be0d806e2 ("crypto: caam - add a test for the RNG")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8700ce07c5 ]
Fix error handling in cc_map_hash_request_update where sg_nents_for_len
return value was assigned to u32, converting negative errors to large
positive values before passing to sg_copy_to_buffer.
Check sg_nents_for_len return value and propagate errors before
assigning to areq_ctx->in_nents.
Fixes: b7ec853068 ("crypto: ccree - use std api when possible")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9eb52037a ]
The return value of sg_nents_for_len was assigned to an unsigned long
in starfive_hash_digest, causing negative error codes to be converted
to large positive integers.
Add error checking for sg_nents_for_len and return immediately on
failure to prevent potential buffer overflows.
Fixes: 7883d1b28a ("crypto: starfive - Add hash and HMAC support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76ce17f6f7 ]
The save_iaa_wq() function unconditionally returns 0, even when an error
is encountered. This prevents the error code from being propagated to the
caller.
Fix this by returning the 'ret' variable, which holds the actual status
of the operations within the function.
Fixes: ea7a5cbb43 ("crypto: iaa - Add Intel IAA Compression Accelerator crypto driver core")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7066160f5 ]
When the new qos valus setting fails, restore to
the original qos values.
Fixes: 72b010dc33 ("crypto: hisilicon/qm - supports writing QoS int the host")
Signed-off-by: nieweiqiang <nieweiqiang@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 59b0afd01b upstream.
The qm_get_qos_value() function calls bus_find_device_by_name() which
increases the device reference count, but fails to call put_device()
to balance the reference count and lead to a device reference leak.
Add put_device() calls in both the error path and success path to
properly balance the reference count.
Found via static analysis.
Fixes: 22d7a6c39c ("crypto: hisilicon/qm - add pci bdf number check")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 64b9642fc2 ]
When disabling SR-IOV, clear the configuration of each VF
in the hardware. Do not exit the configuration clearing process
due to the failure of a single VF. Additionally, Clear the VF
configurations before decrementing the PM counter.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85acd1b26b ]
Before the device reset, although the driver has set the queue
status to intercept doorbells sent by the task process, the reset
thread is isolated from the user-mode task process, so the task process
may still send doorbells. Therefore, before the reset, the queue is
directly invalidated, and the device directly discards the doorbells
sent by the process.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9048beca9c ]
during entropy evaluation, if the generated samples fail
any statistical test, then, all of the bits will be discarded,
and a second set of samples will be generated and tested.
the entropy delay interval should be doubled before performing the
retry.
also, ctrlpriv->rng4_sh_init and inst_handles both reads RNG DRNG
status register, but only inst_handles is updated before every retry.
so only check inst_handles and removing ctrlpriv->rng4_sh_init
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b0dc40ac6 ]
payload_size field of the request header is incorrectly calculated using
sizeof(req). Since 'req' is a pointer (struct hsti_request *), sizeof(req)
returns the size of the pointer itself (e.g., 8 bytes on a 64-bit system),
rather than the size of the structure it points to. This leads to an
incorrect payload size being sent to the Platform Security Processor (PSP),
potentially causing the HSTI query command to fail.
Fix this by using sizeof(*req) to correctly calculate the size of the
struct hsti_request.
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>> ---
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a23ea1f75 ]
Using the number of bytes in the request as DMA timeout is really
inconsistent, as large requests could possibly set a timeout of
hundreds of seconds.
Remove the per-channel timeout field and use a single, static DMA
timeout of 3 seconds for all requests.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Reviewed-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c571019d8 ]
Since SEV or SNP may already be initialized in the previous kernel,
attempting to initialize them again in the kdump kernel can result
in SNP initialization failures, which in turn lead to IOMMU
initialization failures. Moreover, SNP/SEV guests are not run under a
kdump kernel, so there is no need to initialize SEV or SNP during
kdump boot.
Skip SNP and SEV INIT if doing kdump boot.
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/d884eff5f6180d8b8c6698a6168988118cf9cba1.1756157913.git.ashish.kalra@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c634b6b3c ]
As noted in the kernel documentation [1], open-coded multiplication in
allocator arguments is discouraged because it can lead to integer overflow.
Use kcalloc() to gain built-in overflow protection, making memory
allocation safer when calculating allocation size compared to explicit
multiplication. Similarly, use size_add() instead of explicit addition
for 'uobj_chunk_num + sobj_chunk_num'.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments#1
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c9bf72cc1 ]
The clock obtained via devm_clk_get_enabled() is automatically managed
by devres and will be disabled and freed on driver detach. Manually
calling clk_disable_unprepare() in error path and remove function
causes double free.
Remove the manual clock cleanup in both aspeed_acry_probe()'s error
path and aspeed_acry_remove().
Fixes: 2f1cf4e50c ("crypto: aspeed - Add ACRY RSA driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 21140e5caf upstream.
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 57d67c6e82 ("crypto: rockchip - rework by using crypto_engine")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5d643156e upstream.
It seems like everywhere in this file, dd->in_sg is mapped with
DMA_TO_DEVICE and dd->out_sg is mapped with DMA_FROM_DEVICE.
Fixes: 13802005d8 ("crypto: atmel - add Atmel DES/TDES driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 838d2d5151 upstream.
It seems like everywhere in this file, when the request is not
bidirectionala, req->src is mapped with DMA_TO_DEVICE and req->dst is
mapped with DMA_FROM_DEVICE.
Fixes: 62f58b1637 ("crypto: aspeed - add HACE crypto driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f0cafb02de ]
When the initialization of qm->debug.acc_diff_reg fails,
the probe process does not exit. However, after qm->debug.qm_diff_regs is
freed, it is not set to NULL. This can lead to a double free when the
remove process attempts to free it again. Therefore, qm->debug.qm_diff_regs
should be set to NULL after it is freed.
Fixes: 8be0913389 ("crypto: hisilicon/debugfs - Fix debugfs uninit process issue")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a2c9164b5 ]
Function rate limiting is set through physical function driver.
Users configure by providing function information and rate limit values.
Before configuration, it is necessary to check whether the
provided function and PF belong to the same device.
Fixes: 22d7a6c39c ("crypto: hisilicon/qm - add pci bdf number check")
Signed-off-by: Zhushuai Yin <yinzhushuai@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dcd21443d ]
When the device resumes from a suspended state, it will revert to its
initial state and requires re-enabling. Currently, the address prefetch
function is not re-enabled after device resuming. Move the address prefetch
enable to the initialization process. In this way, the address prefetch
can be enabled when the device resumes by calling the initialization
process.
Fixes: 607c191b37 ("crypto: hisilicon - support runtime PM for accelerator device")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4e0815104 ]
When configuring the high-performance mode register, there is no
need to verify whether the register has been successfully
enabled, as there is no possibility of a write failure for this
register.
Fixes: a9864bae18 ("crypto: hisilicon/zip - add zip comp high perf mode configuration")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 361fa7f813 ]
In otx2_cpt_dl_custom_egrp_create(), strscpy() is called with the length
of the source string rather than the size of the destination buffer.
This is fine as long as the destination buffer is larger than the source
string, but we should still use the destination buffer size instead to
call strscpy() as intended. And since 'tmp_buf' is a fixed-size buffer,
we can safely omit the size argument and let strscpy() infer it using
sizeof().
Fixes: d9d7749773 ("crypto: octeontx2 - add apis for custom engine groups")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e53be21dd ]
sg_nents_for_len() returns an int which is negative in case of error.
Fixes: 472b04444c ("crypto: keembay - Add Keem Bay OCS HCU driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a091a58b8a upstream.
octeontx2 crypto driver allocates memory using kmalloc/kzalloc,
and uses this memory for dma (does dma_map_single()). It assumes
that kmalloc/kzalloc will return 128-byte aligned address. But
kmalloc/kzalloc returns 8-byte aligned address after below changes:
"9382bc44b5 arm64: allow kmalloc() caches aligned to the
smaller cache_line_size()
Memory allocated are used for following purpose:
- Input data or scatter list address - 8-Byte alignment
- Output data or gather list address - 8-Byte alignment
- Completion address - 32-Byte alignment.
This patch ensures all addresses are aligned as mentioned above.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e13163b43 upstream.
octeontx2 crypto driver allocates memory using kmalloc/kzalloc,
and uses this memory for dma (does dma_map_single()). It assumes
that kmalloc/kzalloc will return 128-byte aligned address. But
kmalloc/kzalloc returns 8-byte aligned address after below changes:
"9382bc44b5 arm64: allow kmalloc() caches aligned to the
smaller cache_line_size()
Memory allocated are used for following purpose:
- Input data or scatter list address - 8-Byte alignment
- Output data or gather list address - 8-Byte alignment
- Completion address - 32-Byte alignment.
This patch ensures all addresses are aligned as mentioned above.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7b88b4939 upstream.
octeontx2 crypto driver allocates memory using kmalloc/kzalloc,
and uses this memory for dma (does dma_map_single()). It assumes
that kmalloc/kzalloc will return 128-byte aligned address. But
kmalloc/kzalloc returns 8-byte aligned address after below changes:
"9382bc44b5 arm64: allow kmalloc() caches aligned to the
smaller cache_line_size()"
Completion address should be 32-Byte alignment when loading
microcode.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d4df408ba upstream.
Repeated loading and unloading of a device specific QAT driver, for
example qat_4xxx, in a tight loop can lead to a crash due to a
use-after-free scenario. This occurs when a power management (PM)
interrupt triggers just before the device-specific driver (e.g.,
qat_4xxx.ko) is unloaded, while the core driver (intel_qat.ko) remains
loaded.
Since the driver uses a shared workqueue (`qat_misc_wq`) across all
devices and owned by intel_qat.ko, a deferred routine from the
device-specific driver may still be pending in the queue. If this
routine executes after the driver is unloaded, it can dereference freed
memory, resulting in a page fault and kernel crash like the following:
BUG: unable to handle page fault for address: ffa000002e50a01c
#PF: supervisor read access in kernel mode
RIP: 0010:pm_bh_handler+0x1d2/0x250 [intel_qat]
Call Trace:
pm_bh_handler+0x1d2/0x250 [intel_qat]
process_one_work+0x171/0x340
worker_thread+0x277/0x3a0
kthread+0xf0/0x120
ret_from_fork+0x2d/0x50
To prevent this, flush the misc workqueue during device shutdown to
ensure that all pending work items are completed before the driver is
unloaded.
Note: This approach may slightly increase shutdown latency if the
workqueue contains jobs from other devices, but it ensures correctness
and stability.
Fixes: e5745f3411 ("crypto: qat - enable power management for QAT GEN4")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ffc47fedd upstream.
Since the CAAM on these SoCs is managed by another ARM core, called the
SECO (Security Controller) on iMX8QM and Secure Enclave on iMX8ULP, which
also reserves access to register page 0 suspend operations cannot touch
this page.
This is similar to when running OPTEE, where OPTEE will reserve page 0.
Track this situation using a new state variable no_page0, reflecting if
page 0 is reserved elsewhere, either by other management cores in SoC or
by OPTEE.
Replace the optee_en check in suspend/resume with the new check.
optee_en cannot go away as it's needed elsewhere to gate OPTEE specific
situations.
Fixes the following splat at suspend:
Internal error: synchronous external abort: 0000000096000010 [#1] SMP
Hardware name: Freescale i.MX8QXP ACU6C (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : readl+0x0/0x18
lr : rd_reg32+0x18/0x3c
sp : ffffffc08192ba20
x29: ffffffc08192ba20 x28: ffffff8025190000 x27: 0000000000000000
x26: ffffffc0808ae808 x25: ffffffc080922338 x24: ffffff8020e89090
x23: 0000000000000000 x22: ffffffc080922000 x21: ffffff8020e89010
x20: ffffffc080387ef8 x19: ffffff8020e89010 x18: 000000005d8000d5
x17: 0000000030f35963 x16: 000000008f785f3f x15: 000000003b8ef57c
x14: 00000000c418aef8 x13: 00000000f5fea526 x12: 0000000000000001
x11: 0000000000000002 x10: 0000000000000001 x9 : 0000000000000000
x8 : ffffff8025190870 x7 : ffffff8021726880 x6 : 0000000000000002
x5 : ffffff80217268f0 x4 : ffffff8021726880 x3 : ffffffc081200000
x2 : 0000000000000001 x1 : ffffff8020e89010 x0 : ffffffc081200004
Call trace:
readl+0x0/0x18
caam_ctrl_suspend+0x30/0xdc
dpm_run_callback.constprop.0+0x24/0x5c
device_suspend+0x170/0x2e8
dpm_suspend+0xa0/0x104
dpm_suspend_start+0x48/0x50
suspend_devices_and_enter+0x7c/0x45c
pm_suspend+0x148/0x160
state_store+0xb4/0xf8
kobj_attr_store+0x14/0x24
sysfs_kf_write+0x38/0x48
kernfs_fop_write_iter+0xb4/0x178
vfs_write+0x118/0x178
ksys_write+0x6c/0xd0
__arm64_sys_write+0x14/0x1c
invoke_syscall.constprop.0+0x64/0xb0
do_el0_svc+0x90/0xb0
el0_svc+0x18/0x44
el0t_64_sync_handler+0x88/0x124
el0t_64_sync+0x150/0x154
Code: 88dffc21 88dffc21 5ac00800 d65f03c0 (b9400000)
Fixes: d2835701d9 ("crypto: caam - i.MX8ULP donot have CAAM page0 access")
Cc: stable@kernel.org # v6.10+
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8024774190 upstream.
Most kernel applications utilizing the crypto API operate synchronously
and on small buffer sizes, therefore do not benefit from QAT acceleration.
Reduce the priority of QAT implementations for both skcipher and aead
algorithms, allowing more suitable alternatives to be selected by default.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Link: https://lore.kernel.org/all/20250613012357.GA3603104@google.com/
Cc: stable@vger.kernel.org
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
