[ Upstream commit 104016eb67 ]
In ib_umem_dmabuf_get_pinned_with_dma_device(), the call to
ib_umem_dmabuf_map_pages() can fail. If this occurs, the dmabuf
is immediately unpinned but the umem_dmabuf->pinned flag is still
set. Then, when ib_umem_release() is called, it calls
ib_umem_dmabuf_revoke() which will call dma_buf_unpin() again.
Fix this by removing the immediate unpin upon failure and just let
the ib_umem_release/revoke path handle it. This also ensures the
proper unmap-unpin unwind ordering if the dmabuf_map_pages call
happened to fail due to dma_resv_wait_timeout (and therefore has
a non-NULL umem_dmabuf->sgt).
Fixes: 1e4df4a21c ("RDMA/umem: Allow pinned dmabuf umem usage")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260224234153.1207849-1-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f22c77ce49 ]
The pattern is to check the entire driver request space, not just
sizeof something unrelated.
Fixes: 40909f664d ("RDMA/efa: Add EFA verbs implementation")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://patch.msgid.link/1-v1-83e918d69e73+a9-rdma_udata_rc_jgg@nvidia.com
Acked-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9af0feae80 ]
RoCE GID entries become stale when netdev properties change during the
IB device registration window. This is reproducible with a udev rule
that sets a MAC address when a VF netdev appears:
ACTION=="add", SUBSYSTEM=="net", KERNEL=="eth4", \
RUN+="/sbin/ip link set eth4 address 88:22:33:44:55:66"
After VF creation, show_gids displays GIDs derived from the original
random MAC rather than the configured one.
The root cause is a race between netdev event processing and device
registration:
CPU 0 (driver) CPU 1 (udev/workqueue)
────────────── ──────────────────────
ib_register_device()
ib_cache_setup_one()
gid_table_setup_one()
_gid_table_setup_one()
← GID table allocated
rdma_roce_rescan_device()
← GIDs populated with
OLD MAC
ip link set eth4 addr NEW_MAC
NETDEV_CHANGEADDR queued
netdevice_event_work_handler()
ib_enum_all_roce_netdevs()
← Iterates DEVICE_REGISTERED
← Device NOT marked yet, SKIP!
enable_device_and_get()
xa_set_mark(DEVICE_REGISTERED)
← Too late, event was lost
The netdev event handler uses ib_enum_all_roce_netdevs() which only
iterates devices marked DEVICE_REGISTERED. However, this mark is set
late in the registration process, after the GID cache is already
populated. Events arriving in this window are silently dropped.
Fix this by introducing a new xarray mark DEVICE_GID_UPDATES that is
set immediately after the GID table is allocated and initialized. Use
the new mark in ib_enum_all_roce_netdevs() function to iterate devices
instead of DEVICE_REGISTERED.
This is safe because:
- After _gid_table_setup_one(), all required structures exist (port_data,
immutable, cache.gid)
- The GID table mutex serializes concurrent access between the initial
rescan and event handlers
- Event handlers correctly update stale GIDs even when racing with rescan
- The mark is cleared in ib_cache_cleanup_one() before teardown
This also fixes similar races for IP address events (inetaddr_event,
inet6addr_event) which use the same enumeration path.
Fixes: 0df91bb673 ("RDMA/devices: Use xarray to store the client_data")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260127093839.126291-1-jiri@resnulli.us
Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc29063070 ]
When the connection establishment request is rejected from the server
side, then the actual error number sent back should be used.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-10-haris.iqbal@ionos.com
Reviewed-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58b604dfc7 ]
Since wqe_size in ib_uverbs_unmarshall_recv() is user-provided and already
validated, but can still be large, add __GFP_NOWARN to suppress memory
allocation warnings for large sizes, consistent with the similar fix in
ib_uverbs_post_send().
Fixes: 67cdb40ca4 ("[IB] uverbs: Implement more commands")
Signed-off-by: Yi Liu <liuy22@mails.tsinghua.edu.cn>
Link: https://patch.msgid.link/20260129094900.3517706-1-liuy22@mails.tsinghua.edu.cn
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afcae7d7b8 ]
svc_rdma_accept() computes sc_sq_depth as the sum of rq_depth and the
number of rdma_rw contexts (ctxts). This value is used to allocate the
Send CQ and to initialize the sc_sq_avail credit pool.
However, when the device uses memory registration for RDMA operations,
rdma_rw_init_qp() inflates the QP's max_send_wr by a factor of three
per context to account for REG and INV work requests. The Send CQ and
credit pool remain sized for only one work request per context,
causing Send Queue exhaustion under heavy NFS WRITE workloads.
Introduce rdma_rw_max_sge() to compute the actual number of Send Queue
entries required for a given number of rdma_rw contexts. Upper layer
protocols call this helper before creating a Queue Pair so that their
Send CQs and credit accounting match the QP's true capacity.
Update svc_rdma_accept() to use rdma_rw_max_sge() when computing
sc_sq_depth, ensuring the credit pool reflects the work requests
that rdma_rw_init_qp() will reserve.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 00bd1439f4 ("RDMA/rw: Support threshold for registration vs scattering to local pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260128005400.25147-5-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87bf646921 ]
I encontered the following warning:
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0
...
libsha1 [last unloaded: ip6_udp_tunnel]
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT
Tainted: [C]=CRAP
Hardware name: Raspberry Pi 4 Model B Rev 1.2
Call trace:
rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P)
retransmit_timer+0x130/0x188 [rdma_rxe]
call_timer_fn+0x68/0x4d0
__run_timers+0x630/0x888
...
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0
...
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400
...
refcount_t: underflow; use-after-free.
WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400
The issue is caused by a race condition between retransmit_timer() and
rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping
to zero during timer handler execution.
It seems this warning is harmless because rxe_qp_do_cleanup() will flush
all pending timers and requests.
Example of flow causing the issue:
CPU0 CPU1
retransmit_timer() {
spin_lock_irqsave
rxe_destroy_qp()
__rxe_cleanup()
__rxe_put() // qp->ref_count decrease to 0
rxe_qp_do_cleanup() {
if (qp->valid) {
rxe_sched_task() {
WARN_ON(rxe_read(task->qp) <= 0);
}
}
spin_unlock_irqrestore
}
spin_lock_irqsave
qp->valid = 0
spin_unlock_irqrestore
}
Ensure the QP's reference count is maintained and its validity is checked
within the timer callbacks by adding calls to rxe_get(qp) and corresponding
rxe_put(qp) after use.
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Fixes: d946716325 ("RDMA/rxe: Rewrite rxe_task.c")
Link: https://patch.msgid.link/20260120074437.623018-1-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b9d253908 ]
The UVERBS_HANDLER(MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH) function
allocates memory for the device path using kobject_get_path(). If the
length of the device path exceeds the output buffer length, the function
returns -ENOSPC but does not free the allocated memory, resulting in a
memory leak.
Add a kfree() call to the error path to ensure the allocated memory is
properly freed.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: ec7ad65309 ("RDMA/mlx5: Introduce GET_DATA_DIRECT_SYSFS_PATH ioctl")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20260126074801.627898-1-zilin@seu.edu.cn
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1956f0a74c ]
ib_uverbs_post_send() uses cmd.wqe_size from userspace without any
validation before passing it to kmalloc() and using the allocated
buffer as struct ib_uverbs_send_wr.
If a user provides a small wqe_size value (e.g., 1), kmalloc() will
succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge,
and other fields will read beyond the allocated buffer, resulting in
an out-of-bounds read from kernel heap memory. This could potentially
leak sensitive kernel information to userspace.
Additionally, providing an excessively large wqe_size can trigger a
WARNING in the memory allocation path, as reported by syzkaller.
This is inconsistent with ib_uverbs_unmarshall_recv() which properly
validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before
proceeding.
Add the same validation for ib_uverbs_post_send() to ensure wqe_size
is at least sizeof(struct ib_uverbs_send_wr).
Fixes: c3bea3d2dc ("RDMA/uverbs: Use the iterator for ib_uverbs_unmarshall_recv()")
Signed-off-by: Yi Liu <liuy22@mails.tsinghua.edu.cn>
Link: https://patch.msgid.link/20260122142900.2356276-2-liuy22@mails.tsinghua.edu.cn
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18ea78e2ae ]
When querying speed information for a representor in switchdev mode,
the code previously used the first device in the eswitch, which may not
match the device that actually owns the representor. In setups such as
multi-port eswitch or LAG, this led to incorrect port attributes being
reported.
Fix this by retrieving the correct core device from the representor's
eswitch before querying its port attributes.
Fixes: 27f9e0ccb6 ("net/mlx5: Lag, Add single RDMA device in multiport mode")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260115-port-speed-query-fix-v2-1-3bde6a3c78e7@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebc2164a4c ]
During firmware reset in LAG mode, a race condition causes the driver
to hang indefinitely while waiting for UMR completion during device
unload. See [1].
In LAG mode the bond device is only registered on the master, so it
never sees sys_error events from the slave.
During firmware reset this causes UMR waits to hang forever on unload
as the slave is dead but the master hasn't entered error state yet, so
UMR posts succeed but completions never arrive.
Fix this by adding a sys_error notifier that gets registered before
MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device().
This ensures error events reach the bond device throughout teardown.
[1]
Call Trace:
__schedule+0x2bd/0x760
schedule+0x37/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.isra.6+0x2b5/0x4a0
__mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib]
? __xa_erase+0x4a/0xa0
? _cond_resched+0x15/0x30
? wait_for_completion+0x31/0x100
ib_dereg_mr_user+0x48/0xc0 [ib_core]
? rdmacg_uncharge_hierarchy+0xa0/0x100
destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x37/0x150 [ib_uverbs]
__uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs]
uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs]
ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
remove_client_context+0x8b/0xd0 [ib_core]
disable_device+0x8c/0x130 [ib_core]
__ib_unregister_device+0x10d/0x180 [ib_core]
ib_unregister_device+0x21/0x30 [ib_core]
__mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib]
auxiliary_bus_remove+0x1e/0x30
device_release_driver_internal+0x103/0x1f0
bus_remove_device+0xf7/0x170
device_del+0x181/0x410
mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core]
mlx5_disable_lag+0x253/0x260 [mlx5_core]
mlx5_lag_disable_change+0x89/0xc0 [mlx5_core]
mlx5_eswitch_disable+0x67/0xa0 [mlx5_core]
mlx5_unload+0x15/0xd0 [mlx5_core]
mlx5_unload_one+0x71/0xc0 [mlx5_core]
mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core]
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x116/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x22/0x40
Fixes: ede132a5cf ("RDMA/mlx5: Move events notifier registration to be after device registration")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260113-umr-hand-lag-fix-v1-1-3dc476e00cd9@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7874eeacfa ]
The commit e1168f0 ("RDMA/iwcm: Simplify cm_event_handler()")
changed the work submission logic to unconditionally call
queue_work() with the expectation that queue_work() would
have no effect if work was already pending. The problem is
that a free list of struct iwcm_work is used (for which
struct work_struct is embedded), so each call to queue_work()
is basically unique and therefore does indeed queue the work.
This causes a problem in the work handler which walks the work_list
until it's empty to process entries. This means that a single
run of the work handler could process item N+1 and release it
back to the free list while the actual workqueue entry is still
queued. It could then get reused (INIT_WORK...) and lead to
list corruption in the workqueue logic.
Fix this by just removing the work_list. The workqueue already
does this for us.
This fixes the following error that was observed when stress
testing with ucmatose on an Intel E830 in iWARP mode:
[ 151.465780] list_del corruption. next->prev should be ffff9f0915c69c08, but was ffff9f0a1116be08. (next=ffff9f0a15b11c08)
[ 151.466639] ------------[ cut here ]------------
[ 151.466986] kernel BUG at lib/list_debug.c:67!
[ 151.467349] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 151.467753] CPU: 14 UID: 0 PID: 2306 Comm: kworker/u64:18 Not tainted 6.19.0-rc4+ #1 PREEMPT(voluntary)
[ 151.468466] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 151.469192] Workqueue: 0x0 (iw_cm_wq)
[ 151.469478] RIP: 0010:__list_del_entry_valid_or_report+0xf0/0x100
[ 151.469942] Code: c7 58 5f 4c b2 e8 10 50 aa ff 0f 0b 48 89 ef e8 36 57 cb ff 48 8b 55 08 48 89 e9 48 89 de 48 c7 c7 a8 5f 4c b2 e8 f0 4f aa ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90
[ 151.471323] RSP: 0000:ffffb15644e7bd68 EFLAGS: 00010046
[ 151.471712] RAX: 000000000000006d RBX: ffff9f0915c69c08 RCX: 0000000000000027
[ 151.472243] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f0a37d9c600
[ 151.472768] RBP: ffff9f0a15b11c08 R08: 0000000000000000 R09: c0000000ffff7fff
[ 151.473294] R10: 0000000000000001 R11: ffffb15644e7bba8 R12: ffff9f092339ee68
[ 151.473817] R13: ffff9f0900059c28 R14: ffff9f092339ee78 R15: 0000000000000000
[ 151.474344] FS: 0000000000000000(0000) GS:ffff9f0a847b5000(0000) knlGS:0000000000000000
[ 151.474934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 151.475362] CR2: 0000559e233a9088 CR3: 000000020296b004 CR4: 0000000000770ef0
[ 151.475895] PKRU: 55555554
[ 151.476118] Call Trace:
[ 151.476331] <TASK>
[ 151.476497] move_linked_works+0x49/0xa0
[ 151.476792] __pwq_activate_work.isra.46+0x2f/0xa0
[ 151.477151] pwq_dec_nr_in_flight+0x1e0/0x2f0
[ 151.477479] process_scheduled_works+0x1c8/0x410
[ 151.477823] worker_thread+0x125/0x260
[ 151.478108] ? __pfx_worker_thread+0x10/0x10
[ 151.478430] kthread+0xfe/0x240
[ 151.478671] ? __pfx_kthread+0x10/0x10
[ 151.478955] ? __pfx_kthread+0x10/0x10
[ 151.479240] ret_from_fork+0x208/0x270
[ 151.479523] ? __pfx_kthread+0x10/0x10
[ 151.479806] ret_from_fork_asm+0x1a/0x30
[ 151.480103] </TASK>
Fixes: e1168f09b3 ("RDMA/iwcm: Simplify cm_event_handler()")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260112020006.1352438-1-jmoroni@google.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0beefd0e15 ]
In rxe_srq_from_init(), the queue pointer 'q' is assigned to
'srq->rq.queue' before copying the SRQ number to user space.
If copy_to_user() fails, the function calls rxe_queue_cleanup()
to free the queue, but leaves the now-invalid pointer in
'srq->rq.queue'.
The caller of rxe_srq_from_init() (rxe_create_srq) eventually
calls rxe_srq_cleanup() upon receiving the error, which triggers
a second rxe_queue_cleanup() on the same memory, leading to a
double free.
The call trace looks like this:
kmem_cache_free+0x.../0x...
rxe_queue_cleanup+0x1a/0x30 [rdma_rxe]
rxe_srq_cleanup+0x42/0x60 [rdma_rxe]
rxe_elem_release+0x31/0x70 [rdma_rxe]
rxe_create_srq+0x12b/0x1a0 [rdma_rxe]
ib_create_srq_user+0x9a/0x150 [ib_core]
Fix this by moving 'srq->rq.queue = q' after copy_to_user.
Fixes: aae0484e15 ("IB/rxe: avoid srq memory leak")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://patch.msgid.link/20260112015412.29458-1-jiashengjiangcool@gmail.com
Reviewed-by: Zhu Yanjun <yanjun.Zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83835f7c07 ]
This fixes the following error on the server side:
RTRS server session allocation failed: -EINVAL
caused by the caller of the `ib_dma_map_sg()`, which does not expect
less mapped entries, than requested, which is in the order of things
and can be easily reproduced on the machine with enabled IOMMU.
The fix is to treat any positive number of mapped sg entries as a
successful mapping and cache DMA addresses by traversing modified
SG table.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-2-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0789f92990 ]
During a reset, software-generated WCs cannot be reported via
interrupts. This may cause the ULP to miss some WCs.
To avoid this, add check in the CQ arm process: if a hardware reset
has occurred and there are still unreported soft-WCs, notify the ULP
to handle the remaining WCs, thereby preventing any loss of completions.
Fixes: 626903e935 ("RDMA/hns: Add support for reporting wc as software mode")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84bd5d60f0 ]
DSCP is not supported in RoCEv1, but get_dscp() is still called. If
get_dscp() returns an error, it'll eventually cause create_ah to fail
even when using RoCEv1.
Correct the return value and avoid calling get_dscp() when using
RoCEv1.
Fixes: ee20cc17e9 ("RDMA/hns: Support DSCP")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddd6c8c873 ]
Some HCAs (e.g: ConnectX4) do not trigger a IB_EVENT_GID_CHANGE on
subnet prefix update from SM (PortInfo).
Since the commit d58c23c925 ("IB/core: Only update PKEY and GID caches
on respective events"), the GID cache is updated exclusively on
IB_EVENT_GID_CHANGE. If this event is not emitted, the subnet prefix in the
IPoIB interface’s hardware address remains set to its default value
(0xfe80000000000000).
Then rdma_bind_addr() failed because it relies on hardware address to
find the port GID (subnet_prefix + port GUID).
This patch fixes this issue by updating the GID cache on
IB_EVENT_CLIENT_REREGISTER event (emitted on PortInfo::ClientReregister=1).
Fixes: d58c23c925 ("IB/core: Only update PKEY and GID caches on respective events")
Signed-off-by: Etienne AUJAMES <eaujames@ddn.com>
Link: https://patch.msgid.link/aVUfsO58QIDn5bGX@eaujamesFR0130
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3572bdc3a ]
As rkey had been initialized to zero, the WARN_ON_ONCE should never been
triggered. Remove it.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Honggang LI <honggangli@163.com>
Link: https://patch.msgid.link/20251224023819.138846-1-honggangli@163.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5551b02fdb upstream.
ib_umad_write computes data_len from user-controlled count and the
MAD header sizes. With a mismatched user MAD header size and RMPP
header length, data_len can become negative and reach ib_create_send_mad().
This can make the padding calculation exceed the segment size and trigger
an out-of-bounds memset in alloc_send_rmpp_list().
Add an explicit check to reject negative data_len before creating the
send buffer.
KASAN splat:
[ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0
[ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102
[ 211.365867] ib_create_send_mad+0xa01/0x11b0
[ 211.365887] ib_umad_write+0x853/0x1c80
Fixes: 2be8e3ee8e ("IB/umad: Add P_Key index support")
Signed-off-by: YunJe Shin <ioerts@kookmin.ac.kr>
Link: https://patch.msgid.link/20260203100628.1215408-1-ioerts@kookmin.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14ab3da122 upstream.
If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(),
qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data()
dereferences qp->rx_fpdu->more_ddp_segs without checking, which
may lead to a NULL pointer deref. Only check more_ddp_segs when
rx_fpdu is present.
KASAN splat:
[ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
[ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50
Fixes: 8b6a361b8c ("rdma/siw: receive path")
Signed-off-by: YunJe Shin <ioerts@kookmin.ac.kr>
Link: https://patch.msgid.link/20260204092546.489842-1-ioerts@kookmin.ac.kr
Acked-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bee35b7161 upstream.
When running under Hyper-V, the master device to the RDMA device is always
bonded to this RDMA device. This is not user-configurable.
The master device can be unbind/bind from the kernel. During those events,
the RDMA device should set to the current netdev to reflect the change of
master device from those events.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1741821332-9392-2-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Fixes: 1df03a4b44 ("RDMA/mana_ib: Set correct device into ib")
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8445cfec1 upstream.
Change mana_get_primary_netdev_rcu() to mana_get_primary_netdev(), and
return the ndev with refcount held. The caller is responsible for dropping
the refcount.
Also drop the check for IFF_SLAVE as it is not necessary if the upper
device is present.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1741821332-9392-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Fixes: 1df03a4b44 ("RDMA/mana_ib: Set correct device into ib")
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57f3cb6c84 upstream.
If the CM ID is destroyed while the CM event for multicast creating is
still queued the cancel_work_sync() will prevent the work from running
which also prevents destroying the ah_attr. This leaks a refcount and
triggers a WARN:
GID entry ref leak for dev syz1 index 2 ref=573
WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 release_gid_table drivers/infiniband/core/cache.c:806 [inline]
WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 gid_table_release_one+0x284/0x3cc drivers/infiniband/core/cache.c:886
Destroy the ah_attr after canceling the work, it is safe to call this
twice.
Link: https://patch.msgid.link/r/0-v1-4285d070a6b2+20a-rdma_mc_gid_leak_syz_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: fe454dc31e ("RDMA/ucma: Fix use-after-free bug in ucma_create_uevent")
Reported-by: syzbot+b0da83a6c0e2e2bddbd4@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68232e7b.050a0220.f2294.09f6.GAE@google.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7b8e876e0 upstream.
The netlink response for RDMA_NL_LS_OP_IP_RESOLVE should always have a
LS_NLA_TYPE_DGID attribute, it is invalid if it does not.
Use the nl parsing logic properly and call nla_parse_deprecated() to fill
the nlattrs array and then directly index that array to get the data for
the DGID. Just fail if it is NULL.
Remove the for loop searching for the nla, and squash the validation and
parsing into one function.
Fixes an uninitialized read from the stack triggered by userspace if it
does not provide the DGID to a kernel initiated RDMA_NL_LS_OP_IP_RESOLVE
query.
BUG: KMSAN: uninit-value in hex_byte_pack include/linux/hex.h:13 [inline]
BUG: KMSAN: uninit-value in ip6_string+0xef4/0x13a0 lib/vsprintf.c:1490
hex_byte_pack include/linux/hex.h:13 [inline]
ip6_string+0xef4/0x13a0 lib/vsprintf.c:1490
ip6_addr_string+0x18a/0x3e0 lib/vsprintf.c:1509
ip_addr_string+0x245/0xee0 lib/vsprintf.c:1633
pointer+0xc09/0x1bd0 lib/vsprintf.c:2542
vsnprintf+0xf8a/0x1bd0 lib/vsprintf.c:2930
vprintk_store+0x3ae/0x1530 kernel/printk/printk.c:2279
vprintk_emit+0x307/0xcd0 kernel/printk/printk.c:2426
vprintk_default+0x3f/0x50 kernel/printk/printk.c:2465
vprintk+0x36/0x50 kernel/printk/printk_safe.c:82
_printk+0x17e/0x1b0 kernel/printk/printk.c:2475
ib_nl_process_good_ip_rsep drivers/infiniband/core/addr.c:128 [inline]
ib_nl_handle_ip_res_resp+0x963/0x9d0 drivers/infiniband/core/addr.c:141
rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:-1 [inline]
rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
rdma_nl_rcv+0xefa/0x11c0 drivers/infiniband/core/netlink.c:259
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0xf04/0x12b0 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x10b3/0x1250 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg+0x333/0x3d0 net/socket.c:729
____sys_sendmsg+0x7e0/0xd80 net/socket.c:2617
___sys_sendmsg+0x271/0x3b0 net/socket.c:2671
__sys_sendmsg+0x1aa/0x300 net/socket.c:2703
__compat_sys_sendmsg net/compat.c:346 [inline]
__do_compat_sys_sendmsg net/compat.c:353 [inline]
__se_compat_sys_sendmsg net/compat.c:350 [inline]
__ia32_compat_sys_sendmsg+0xa4/0x100 net/compat.c:350
ia32_sys_call+0x3f6c/0x4310 arch/x86/include/generated/asm/syscalls_32.h:371
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
__do_fast_syscall_32+0xb0/0x150 arch/x86/entry/syscall_32.c:306
do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:331
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:3
Link: https://patch.msgid.link/r/0-v1-3fbaef094271+2cf-rdma_op_ip_rslv_syz_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: ae43f82867 ("IB/core: Add IP to GID netlink offload")
Reported-by: syzbot+938fcd548c303fe33c1a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/68dc3dac.a00a0220.102ee.004f.GAE@google.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fcd431a962 ]
The dma_alloc_coherent() allocates a dma-mapped buffer, pbl->pg_arr[i].
The dma_free_coherent() should pass the same buffer to
dma_free_coherent() and not page-aligned.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20251230085121.8023-2-fourier.thomas@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43bd09d5b7 ]
If device max_mr_size bits in the range [mr_page_shift+31:mr_page_shift]
are zero, the `min3` function will set clt_path::max_pages_per_mr to
zero.
`alloc_path_reqs` will pass zero, which is invalid, as the third parameter
to `ib_alloc_mr`.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Signed-off-by: Honggang LI <honggangli@163.com>
Link: https://patch.msgid.link/20251229025617.13241-1-honggangli@163.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d70e0fb0f ]
In bnxt_qplib_alloc_init_hwq(), while allocating memory for PDE table
driver incorrectly is using the "pg_size" value passed to the function.
Fixed to use the right value 4K. Also, fixed the allocation size for
PBL table.
Fixes: 0c4dcd6028 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20251223131855.145955-1-kalesh-anakkur.purayil@broadcom.com
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f01765a236 ]
The bnxt_re SEND path checks wr->send_flags to enable features such as
IP checksum offload. However, send_flags is a bitmask and may contain
multiple flags (e.g. IB_SEND_SIGNALED | IB_SEND_IP_CSUM), while the
existing code uses a switch() statement that only matches when
send_flags is exactly IB_SEND_IP_CSUM.
As a result, checksum offload is not enabled when additional SEND
flags are present.
Replace the switch() with a bitmask test:
if (wr->send_flags & IB_SEND_IP_CSUM)
This ensures IP checksum offload is enabled correctly when multiple
SEND flags are used.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251219093308.2415620-1-alok.a.tiwari@oracle.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 145a417a39 ]
RCFW_COMM_CONS_PCI_BAR_REGION is defined as BAR 2, so checking
!creq_db->reg.bar_id is incorrect and always false.
pci_resource_start() returns the BAR base address, and a value of 0
indicates that the BAR is unassigned. Update the condition to test
bar_base == 0 instead.
This ensures the driver detects and logs an error for an unassigned
RCFW communication BAR.
Fixes: cee0c7bba4 ("RDMA/bnxt_re: Refactor command queue management code")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251217100158.752504-1-alok.a.tiwari@oracle.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8aaa848ead ]
Fix missing comparison operator for RDMA_NETWORK_ROCE_V1 in the
conditional statement. The constant was used directly instead of
being compared with net_type, causing the condition to always
evaluate to true.
Fixes: 1c15b4f2a4 ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type")
Signed-off-by: Jang Ingyu <ingyujang25@korea.ac.kr>
Link: https://patch.msgid.link/20251219041508.1725947-1-ingyujang25@korea.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85463eb6a4 ]
The page size used for device might in some cases be smaller than
PAGE_SIZE what results in a negative shift when calculating the number of
host pages in PAGE_SIZE for a debug log. Remove the debug line together
with the calculation.
Fixes: 40909f664d ("RDMA/efa: Add EFA verbs implementation")
Link: https://patch.msgid.link/r/20251210173656.8180-1-mrgolin@amazon.com
Reviewed-by: Tom Sela <tomsela@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Reviewed-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f05611728 ]
irdma_net_event() should not dereference anything from "neigh" (alias
"ptr") until it has checked that the event is NETEVENT_NEIGH_UPDATE.
Other events come with different structures pointed to by "ptr" and they
may be smaller than struct neighbour.
Move the read of neigh->dev under the NETEVENT_NEIGH_UPDATE case.
The bug is mostly harmless, but it triggers KASAN on debug kernels:
BUG: KASAN: stack-out-of-bounds in irdma_net_event+0x32e/0x3b0 [irdma]
Read of size 8 at addr ffffc900075e07f0 by task kworker/27:2/542554
CPU: 27 PID: 542554 Comm: kworker/27:2 Kdump: loaded Not tainted 5.14.0-630.el9.x86_64+debug #1
Hardware name: [...]
Workqueue: events rt6_probe_deferred
Call Trace:
<IRQ>
dump_stack_lvl+0x60/0xb0
print_address_description.constprop.0+0x2c/0x3f0
print_report+0xb4/0x270
kasan_report+0x92/0xc0
irdma_net_event+0x32e/0x3b0 [irdma]
notifier_call_chain+0x9e/0x180
atomic_notifier_call_chain+0x5c/0x110
rt6_do_redirect+0xb91/0x1080
tcp_v6_err+0xe9b/0x13e0
icmpv6_notify+0x2b2/0x630
ndisc_redirect_rcv+0x328/0x530
icmpv6_rcv+0xc16/0x1360
ip6_protocol_deliver_rcu+0xb84/0x12e0
ip6_input_finish+0x117/0x240
ip6_input+0xc4/0x370
ipv6_rcv+0x420/0x7d0
__netif_receive_skb_one_core+0x118/0x1b0
process_backlog+0xd1/0x5d0
__napi_poll.constprop.0+0xa3/0x440
net_rx_action+0x78a/0xba0
handle_softirqs+0x2d4/0x9c0
do_softirq+0xad/0xe0
</IRQ>
Fixes: 915cc7ac0f ("RDMA/irdma: Add miscellaneous utility definitions")
Link: https://patch.msgid.link/r/20251127143150.121099-1-mschmidt@redhat.com
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71d3bdae5e ]
The HW disables bounds checking for MRs with a length of zero, so
the driver will only allow a zero length MR if the "all_memory"
flag is set, and this flag is only set if IB_PD_UNSAFE_GLOBAL_RKEY
is set for the PD.
This means that the "get_dma_mr" method will currently fail unless
the IB_PD_UNSAFE_GLOBAL_RKEY flag is set. This has not been an issue
because the "get_dma_mr" method is only ever invoked if the device
does not support the local DMA key or if IB_PD_UNSAFE_GLOBAL_RKEY
is set, and so far, all IRDMA HW supports the local DMA lkey.
However, some new HW does not support the local DMA lkey, so the
"get_dma_mr" method needs to work without IB_PD_UNSAFE_GLOBAL_RKEY
being set.
To support HW that does not allow the local DMA lkey, the logic has
been changed to pass an explicit flag to indicate when a dma_mr is
being created so that the zero length will be allowed.
Also, the "all_memory" flag has been forced to false for normal MR
allocation since these MRs are never supposed to provide global
unsafe rkey semantics anyway; only the MR created with "get_dma_mr"
should support this.
Fixes: bb6d73d9ad ("RDMA/irdma: Prevent zero-length STAG registration")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251125025350.180-7-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a26c4c7cdb ]
DMA MR doesn't use the unified MR model. So the lkey passed
on to the reg_mr command to FW should contain the correct
lkey. Driver is incorrectly over writing the lkey with pdid
and firmware commands fails due to this.
Avoid passing the wrong key for cases where the unified MR
registration is not used.
Fixes: f786eebbbe ("RDMA/bnxt_re: Avoid an extra hwrm per MR creation")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1763624215-10382-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6afe40ff48 ]
Inline size supported by the device is based on the number
of SGEs supported by the adapter. Change the inline
size calculation based on that.
Fixes: de1d364c38 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1763624215-10382-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a338d6e849 ]
After device_initialize() is called, use put_device() to release the
device according to kernel device management rules. While direct
kfree() work in this case, using put_device() is more correct.
Found by code review.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20251110005158.13394-1-make24@iscas.ac.cn
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe9622011f ]
When QP wraps around, WQE data from the previous use at the same
position still remains as driver does not clear it. The WQE field
layout differs across different opcodes, causing that the fields
that are not explicitly assigned for the current opcode retain
stale values, and are issued to HW by mistake. Such fields are as
follows:
* MSG_START_SGE_IDX field in ATOMIC WQE
* BLOCK_SIZE and ZBVA fields in FRMR WQE
* DirectWQE fields when DirectWQE not used
For ATOMIC WQE, always set the latest sge index in MSG_START_SGE_IDX
as required by HW.
For FRMR WQE and DirectWQE, clear only those unassigned fields
instead of the entire WQE to avoid performance penalty.
Fixes: 68a997c5d2 ("RDMA/hns: Add FRMR support for hip08")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251016114051.1963197-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5a7cbea54 ]
The actual sge number may exceed the value specified in init_attr->cap
when HW needs extra sge to enable inline feature. Since these extra
sges are not expected by ULP, return the user-specified value to ULP
instead of the expanded sge number.
Fixes: 0c5e259b06 ("RDMA/hns: Fix incorrect sge nums calculation")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251016114051.1963197-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4b67b514a ]
Currently driver enforces affinity between QP cache and send CQ
cache, which helps improve the performance of sending, but doesn't
set affinity with recv CQ cache, resulting in suboptimal performance
of receiving.
Use one CQ bank per context to ensure the affinity among QP, send CQ
and recv CQ. For kernel ULP, CQ bank is fixed to 0.
Fixes: 9e03dbea2b ("RDMA/hns: Fix CQ and QP cache affinity")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251016114051.1963197-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5575b7646b ]
The driver maintains a CQ table that is used to ensure that a CQ is
still valid when processing CQ related AEs. When a CQ is destroyed,
the table entry is cleared, using irdma_cq.cq_num as the index. This
field was never being set, so it was just always clearing out entry
0.
Additionally, the cq_num field size was increased to accommodate HW
supporting more than 64K CQs.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20250923142439.943930-1-jmoroni@google.com
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 880245fd02 ]
These fields were set but not used anywhere, so remove them.
Link: https://patch.msgid.link/r/20250923142128.943240-1-jmoroni@google.com
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: 5575b7646b ("RDMA/irdma: Set irdma_cq cq_num field during CQ create")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d158f47f1 ]
In some cases, it is possible for pble_rsrc->next_fpm_addr to be
larger than u32, so remove the u32 cast to avoid unintentional
truncation.
This fixes the following error that can be observed when registering
massive memory regions:
[ 447.227494] (NULL ib_device): cqp opcode = 0x1f maj_err_code = 0xffff min_err_code = 0x800c
[ 447.227505] (NULL ib_device): [Update PE SDs Cmd Error][op_code=21] status=-5 waiting=1 completion_err=1 maj=0xffff min=0x800c
Fixes: e8c4dbc2fc ("RDMA/irdma: Add PBLE resource manager")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20250923190850.1022773-1-jmoroni@google.com
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42f993d343 ]
Currently, all master upper netdevices (e.g., bond, VRF) are treated
equally.
When a VRF netdevice is used over an IPoIB netdevice, the expected
netdev resolution is on the lower IPoIB device which has the IP address
assigned to it and not the VRF device.
The rdma_cm module (CMA) tries to match incoming requests to a
particular netdevice. When successful, it also validates that the return
path points to the same device by performing a routing table lookup.
Currently, the former would resolve to the VRF netdevice, while the
latter to the correct lower IPoIB netdevice, leading to failure in
rdma_cm.
Improve this by ignoring the VRF master netdevice, if it exists, and
instead return the lower IPoIB device.
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20250916111103.84069-5-edwards@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 060842fed5 ]
Update Kconfig to add dependency on idpf module and
add IPU E2000 to the list of supported devices.
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20250827152545.2056-17-tatyana.e.nikolova@intel.com
Tested-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
