-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmjMiVUQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcRXB/994AOVcP5KR5Xtl9De+9IcQBAaGouGIHG7
w7DDB0yRo4YFNK2bE1u7q3ap/jpbQAezv85xkGkh4+RwxolYDW7KI7FjYyuNEC0n
C6dqgzPV/zb0xuBbuAV8z9UYqb/Fu7tWXp/cGr4TmUpSzJdXByOuuefnJjuu0vOR
wAeOLfplI+s8aEMaLaB1d5Huz0IlRS27eyOAjE07NKHsuVtDqZ0voO8S+QTd/7W+
cUZo0BTAuitRWItAKRq1Bxv12jEnkvkGnw8l+iDbQwS2nRJ2NuPJ+/GQUFn53qPP
ZjGFnOMiduJ20WbxXUHSmZfKOH7O8Dz+UQEWYfBfyLcQZ73M3ffB
=cBeN
-----END PGP SIGNATURE-----
Merge tag 'v6.17-rockchip-dtsfixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Another missing supply and a wrong headphone gpio level.
* tag 'v6.17-rockchip-dtsfixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5
arm64: dts: rockchip: Add vcc supply for SPI Flash on NanoPC-T6
Fix SATA ports on various boards: Macchiatobin, CN913x-solidrun.
Fix audio on Armada 370 DB and OpenRD.
Disable eMMC high-speed modes on the CN9132 CEX-7 module.
Disable runtime reconfiguration for PCIe lanes on the CN9132 CEX-7 module.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCaMQ25gAKCRALBhiOFHI7
1QnjAKCeVVCZSGova+vZ9rFY9fah+bYTyACgrGHfGRC1LjqXzQd0geLxn6gXfok=
=4B7s
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=IxNl
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes
mvebu fixes for 6.17 (part 1)
Fix SATA ports on various boards: Macchiatobin, CN913x-solidrun.
Fix audio on Armada 370 DB and OpenRD.
Disable eMMC high-speed modes on the CN9132 CEX-7 module.
Disable runtime reconfiguration for PCIe lanes on the CN9132 CEX-7 module.
* tag 'mvebu-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports
arm64: dts: marvell: cn9132-clearfog: disable eMMC high-speed modes
arm64: dts: marvell: cn913x-solidrun: fix sata ports status
ARM: dts: kirkwood: Fix sound DAI cells for OpenRD clients
ARM64: dts: mcbin: fix SATA ports on Macchiatobin
ARM: dts: armada-370-db: Fix stereo audio input routing on Armada 370
Link: https://lore.kernel.org/r/87ikhnn1pl.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The mvebu-comphy driver does not currently know how to pass correct
lane-count to ATF while configuring the serdes lanes.
This causes the system to hard reset during reconfiguration, if a pci
card is present and has established a link during bootloader.
Remove the comphy handles from the respective pci nodes to avoid runtime
reconfiguration, relying solely on bootloader configuration - while
avoiding the hard reset.
When bootloader has configured the lanes correctly, the pci ports are
functional under Linux.
This issue may be addressed in the comphy driver at a future point.
Fixes: e9ff907f40 ("arm64: dts: add description for solidrun cn9132 cex7 module and clearfog board")
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Similar to MacchiatoBIN the high-speed modes are unstable on the CN9132
CEX-7 module, leading to failed transactions under normal use.
Disable all high-speed modes including UHS.
Additionally add no-sdio and non-removable properties as appropriate for
eMMC.
Fixes: e9ff907f40 ("arm64: dts: add description for solidrun cn9132 cex7 module and clearfog board")
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Commit "arm64: dts: marvell: only enable complete sata nodes" changed
armada-cp11x.dtsi disabling all sata ports status by default.
The author missed some dts which relied on the dtsi enabling all ports,
and just disabled unused ones instead.
Update dts for SolidRun cn913x based boards to enable the available
ports, rather than disabling the unvavailable one.
Further according to dt bindings the serdes phys are to be specified in
the port node, not the controller node.
Move those phys properties accordingly in clearfog base/pro/solidwan.
Fixes: 30023876ae ("arm64: dts: marvell: only enable complete sata nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The TMU has two temperature measurement sites located on the chip. The
probe 0 is located inside of the ANAMIX, while the probe 1 is located near
the ARM core. This has been confirmed by checking with HW design team and
checking RTL code.
So correct the {cpu,soc}-thermal sensor index.
Fixes: 30cdd62dce ("arm64: dts: imx8mp: Add thermal zones support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The logic of the headphone detect pin seems to be inverted, with this
change headphones actually output sound when plugged in.
Does not need workaround of using pin-switches to enable output.
Verified by checking /sys/kernel/debug/gpio.
Fixes: ae46756faf ("arm64: dts: rockchip: analog audio on Orange Pi 5")
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250904030150.986042-1-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
FriendlyELEC NanoPC-T6 LTS schematics shows VCC_1V8_S3 being used to
power SPI NOR chip.
This fixes the following kernel message:
spi-nor spi5.0: supply vcc not found, using dummy regulator
Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
Link: https://lore.kernel.org/r/20250905-nanopc-t6-spi-nor-v2-1-098b476d9509@juszkiewicz.com.pl
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
PCIe and USB actually work, because the PCIe does share its lanes between
two ports and the usb needs to toggle a gpio to supply power.
The other interesting fix is the headphone detection on the Orange Pi 5+.
The rest are some added supplies to make the boot log less scary and a
number of styling fixes.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmi4NDAQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgXiZB/9r5AdLNI7FUVV9jPY7NrZTdWR9JW9EnVyp
EIEvmDoVDiLouB0DSf6jGtNOMoMRZoyUy2dXGjEIPDfIq/RrRzqKd+uWkxrtCRKB
TZ8SF+Sx8gwXjAYcenpdu9yPKKus8xvO/ge3khs7s0a0CGo3sXmazU2FZdv9y2og
SDVtk89bnvjW4gAkM0V4mr/BuAQbycMQDvdCSBUjXX7nIrMqCHFkjLaCfg8cRTiH
b7JFwYDrrTP0bAzhFjCWCQPTqvqRr0btLMyhFW+7vZlPCr99F6HUV5YQ1r197kPy
DoMs0durK3dV+P9MQHsD9qX9SBGKM3fBB+ftiR2aoIllkaCL/EF8
=x+X/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=m9dk
-----END PGP SIGNATURE-----
Merge tag 'v6.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
The newly added Rock 5T board needed slightly bigger fixes to make the
PCIe and USB actually work, because the PCIe does share its lanes between
two ports and the usb needs to toggle a gpio to supply power.
The other interesting fix is the headphone detection on the Orange Pi 5+.
The rest are some added supplies to make the boot log less scary and a
number of styling fixes.
* tag 'v6.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix second M.2 slot on ROCK 5T
arm64: dts: rockchip: fix USB on RADXA ROCK 5T
arm64: dts: rockchip: Add vcc-supply to SPI flash on Pinephone Pro
arm64: dts: rockchip: fix es8388 address on rk3588s-roc-pc
arm64: dts: rockchip: Fix Bluetooth interrupts flag on Neardi LBA3368
arm64: dts: rockchip: correct network description on Sige5
arm64: dts: rockchip: Minor whitespace cleanup
ARM: dts: rockchip: Minor whitespace cleanup
arm64: dts: rockchip: Add supplies for eMMC on rk3588-orangepi-5
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5 plus
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3399-pinebook-pro
arm64: dts: rockchip: mark eeprom as read-only for Radxa E52C
Link: https://lore.kernel.org/r/5909239.Y6S9NjorxK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Radxa ROCK 5T has two M.2 slots, much like the Radxa Rock 5B+. As it
stands, the board won't be able to use PCIe3 if the second M.2 slot is
in use.
Fix this by adding the necessary node enablement and data-lanes property
to the ROCK 5T device tree, mirroring what's in the ROCK 5B+ device
tree.
Reported-by: FUKAUMI Naoki <naoki@radxa.com>
Closes: https://libera.catirclogs.org/linux-rockchip/2025-08-25#38610630;
Fixes: 0ea651de9b ("arm64: dts: rockchip: add ROCK 5T device tree")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250826-rock5t-second-m2-fix-v1-1-8252124f9cc8@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Axiado AX3000 EVK has total of 4 UART ports. Add missing alias for uart0,
uart1, uart2.
This fixes the probe failures on the remaining UARTs.
Fixes: 1f70557790 ("arm64: dts: axiado: Add initial support for AX3000 SoC and eval board")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As documented in the PinephonePro-Schematic-V1.0-20211127.pdf,
page 11, the SPI Flash's VCC pin is connected to VCC_1V8 power
source. This fixes the following warning:
spi-nor spi1.0: supply vcc not found, using dummy regulator
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ondřej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20250827143501.1646163-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Fixes: 7b4a8097e5 ("arm64: dts: rockchip: Add Neardi LBA3368 board")
Cc: stable+noautosel@kernel.org # Needs testing, because actual level is just a guess
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-By: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20250818090445.28112-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The eMMC description is missing both vmmc and vqmmc supplies.
Add them to complete the description.
Fixes: 236d225e1e ("arm64: dts: rockchip: Add board device tree for rk3588-orangepi-5-plus")
Fixes: ea63f4666e ("arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250821052939.1869171-1-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The logic of the headphone detect pin seems to be inverted, with this
change headphones actually output sound when plugged in.
Verified by checking /sys/kernel/debug/gpio and by listening.
Fixes: 236d225e1e ("arm64: dts: rockchip: Add board device tree for rk3588-orangepi-5-plus")
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Reviewed-by: Ondřej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20250823-orangepi5-v1-1-ae77dd0e06d7@hotmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Booting 6.16 on the Macchiatobin, I discover that I can no longer
access my disks, and thus the userspace boot fails. The cause appears
to be that one of the SATA controllers doesn't have any ports:
[ 1.190312] ahci f4540000.sata: supply ahci not found, using dummy regulator
[ 1.196255] ahci f4540000.sata: supply phy not found, using dummy regulator
[ 1.202026] ahci f4540000.sata: No port enabled
This is as a result of the blamed commit below which added a default
disabled status to the .dtsi, but didn't properly update the mcbin
dtsi file. Fix this regression.
Fixes: 30023876ae ("arm64: dts: marvell: only enable complete sata nodes")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The assigned clock for JPEG encoder IP has to be IMX95_CLK_VPUBLK_JPEG_ENC
and not IMX95_CLK_VPUBLK_JPEG_DEC (_ENC at the end, not _DEC). This is a
simple copy-paste error, fix it.
Fixes: 153c039a73 ("arm64: dts: imx95: add jpeg encode and decode nodes")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
1, the phy support up to 8Mbit/s databitrate for CAN FD.
refer to product data sheet:
https://www.nxp.com/docs/en/data-sheet/TJA1463.pdf
2, the standby pin of the phy is ACTIVE_LOW.
3, the phy of flexcan2 connect the standby/en pin to PCAL6408 on i2c4 bus.
Fixes: 02b7adb791 ("arm64: dts: imx95-19x19-evk: add adc0 flexcan[1,2] i2c[2,3] uart5 spi3 and tpm3")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing microSD slot vqmmc-supply property, otherwise the kernel
might shut down LDO5 regulator and that would power off the microSD
card slot, possibly while it is in use. Add the property to make sure
the kernel is aware of the LDO5 regulator which supplies the microSD
slot and keeps the LDO5 enabled.
Fixes: 562d222f23 ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing microSD slot vqmmc-supply property, otherwise the kernel
might shut down LDO5 regulator and that would power off the microSD
card slot, possibly while it is in use. Add the property to make sure
the kernel is aware of the LDO5 regulator which supplies the microSD
slot and keeps the LDO5 enabled.
Fixes: 8d6712695b ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
BUCK4 rail supplies the 3.3V rail. Use the actual regulator
instead of a virtual fixed regulator.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix SD card removal caused by automatic LDO5 power off after boot:
LDO5: disabling
mmc1: card 59b4 removed
EXT4-fs (mmcblk1p2): shut down requested (2)
Aborting journal on device mmcblk1p2-8.
JBD2: I/O error when updating journal superblock for mmcblk1p2-8.
To prevent this, add vqmmc regulator for USDHC, using a GPIO-controlled
regulator that is supplied by LDO5. Since this is implemented on SoM but
used on baseboards with SD-card interface, implement the functionality
on SoM part and optionally enable it on baseboards if needed.
Fixes: 418d1d840e ("arm64: dts: freescale: add initial device tree for TQMa8MPQL with i.MX8MP")
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As described in the pinebookpro_v2.1_mainboard_schematic.pdf page 10,
he SPI Flash's VCC connector is connected to VCC_3V0 power source.
This fixes the following warning:
spi-nor spi1.0: supply vcc not found, using dummy regulator
Fixes: 5a65505a69 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250730102129.224468-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The eeprom on the Radxa E52C SBC contains manufacturer data
such as the mac address, so it should be marked as read-only.
Fixes: 9be4171219 ("arm64: dts: rockchip: Add Radxa E52C")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250810100020.445053-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
These are a few patches to fix up bits that went missing during the
merge window: The tegra and s3c patches address trivial regressions
from conflicts, the bcm7445 makes the dt conform to the binding that
was made stricter.
-----BEGIN PGP SIGNATURE-----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=fzZb
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are a few patches to fix up bits that went missing during the
merge window: The tegra and s3c patches address trivial regressions
from conflicts, the bcm7445 makes the dt conform to the binding that
was made stricter"
* tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: tegra: Remove numa-node-id properties
ARM: s3c/gpio: complete the conversion to new GPIO value setters
ARM: dts: broadcom: Fix bcm7445 memory controller compatible
This contains an extra patch that drops numa-node-id properties that
were added to the Tegra264 DT files by mistake.
-----BEGIN PGP SIGNATURE-----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=2IBm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OFV+
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.17-arm64-dt-v3' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
arm64: tegra: Device tree changes for v6.17-rc1
This contains an extra patch that drops numa-node-id properties that
were added to the Tegra264 DT files by mistake.
* tag 'tegra-for-6.17-arm64-dt-v3' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Remove numa-node-id properties
arm64: tegra: Add p3971-0089+p3834-0008 support
arm64: tegra: Add memory controller on Tegra264
arm64: tegra: Add Tegra264 support
dt-bindings: memory: tegra: Add Tegra264 support
Link: https://lore.kernel.org/r/20250731162920.3329820-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is mostly fixes and cleanups and code reworks that trickled in
across the merge window and the weeks leading up. The only
substantive update is the Mediatek ufs driver which accounts for the
bulk of the additions.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCaJNGsyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbe3AQCWaCas
yQj/3S7dK17qdRQa7ooU3xeXt1A1CLlhkJEyWwD/TmmxUSFvbxjm/+Wdu0l+JX15
EGVmwp+bX/p2ea+s6AE=
=ZYNP
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is mostly fixes and cleanups and code reworks that trickled in
across the merge window and the weeks leading up. The only substantive
update is the Mediatek ufs driver which accounts for the bulk of the
additions"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (37 commits)
scsi: libsas: Use a bool for sas_deform_port() second argument
scsi: libsas: Move declarations of internal functions to sas_internal.h
scsi: libsas: Make sas_get_ata_info() static
scsi: libsas: Simplify sas_ata_wait_eh()
scsi: libsas: Refactor dev_is_sata()
scsi: sd: Make sd shutdown issue START STOP UNIT appropriately
scsi: arm64: dts: mediatek: mt8195: Add UFSHCI node
scsi: dt-bindings: mediatek,ufs: add MT8195 compatible and update clock nodes
scsi: dt-bindings: mediatek,ufs: Add ufs-disable-mcq flag for UFS host
scsi: ufs: ufs-mediatek: Add UFS host support for MT8195 SoC
scsi: ufs: ufs-pci: Remove control of UIC Completion interrupt for Intel MTL
scsi: ufs: core: Do not write interrupt enable register unnecessarily
scsi: ufs: core: Set and clear UIC Completion interrupt as needed
scsi: ufs: core: Remove duplicated code in ufshcd_send_bsg_uic_cmd()
scsi: ufs: core: Move ufshcd_enable_intr() and ufshcd_disable_intr()
scsi: ufs: ufs-pci: Remove UFS PCI driver's ->late_init() call back
scsi: ufs: ufs-pci: Fix default runtime and system PM levels
scsi: ufs: ufs-pci: Fix hibernate state transition for Intel MTL-like host controllers
scsi: ufs: host: mediatek: Support FDE (AES) clock scaling
scsi: ufs: host: mediatek: Support clock scaling with Vcore binding
...
These were initially added because some software was checking for their
presence. However, the device is not NUMA, so adding these is wrong and
hence they should be removed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
non-drm:
rust:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
mtd:
- driver for Intel GPU non-volatile storage
i2c
- designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support
-----BEGIN PGP SIGNATURE-----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=n9MO
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
These five newly supported chips come with both devicetree descriptions
and the changes to wire them up to the build system for easier bisection.
The chips in question are:
- Marvell PXA1908 was the first 64-bit mobile phone chip from Marvell
in the product line that started with the Digital StrongARM SA1100
based PDAs and continued with the Intel PXA2xx that dominated early
smartphones. This one only made it only into a few products before the
entire product line was cut in 2015.
- The QiLai SoC is made by RISC-V core designer Andes Technologies
and is in the 'Voyager' reference board in MicroATX form factor.
It uses four in-order AX45MP cores, which is the midrange product
from Andes.
- CIX P1 is one of the few Arm chips designed for small workstations,
and this one uses 12 Cortex-A720/A520 cores, making it also one
of the only ARMv9.2 machines that one can but at the moment.
- Axiado AX3000 is an embedded chip with relative small Cortex-A53
CPU cores described as a "Trusted Control/Compute Unit" that can
be used as a BMC in servers. In addition to the usual I/O, this one
comes with 10GBit ethernet and and a 4TOPS NPU.
- Sophgo SG2000 is an embedded chip that comes with both RISC-V
and Arm cores that can run Linux. This was already supported for
RISC-V but now it also works on Arm
One more chip, the Black Sesame C1200 did not make it in tirm for the
merge window.
-----BEGIN PGP SIGNATURE-----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=pMk/
-----END PGP SIGNATURE-----
Merge tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC support from Arnd Bergmann:
"These five newly supported chips come with both devicetree
descriptions and the changes to wire them up to the build system for
easier bisection.
The chips in question are:
- Marvell PXA1908 was the first 64-bit mobile phone chip from Marvell
in the product line that started with the Digital StrongARM SA1100
based PDAs and continued with the Intel PXA2xx that dominated early
smartphones. This one only made it only into a few products before
the entire product line was cut in 2015.
- The QiLai SoC is made by RISC-V core designer Andes Technologies
and is in the 'Voyager' reference board in MicroATX form factor. It
uses four in-order AX45MP cores, which is the midrange product from
Andes.
- CIX P1 is one of the few Arm chips designed for small workstations,
and this one uses 12 Cortex-A720/A520 cores, making it also one of
the only ARMv9.2 machines that one can but at the moment.
- Axiado AX3000 is an embedded chip with relative small Cortex-A53
CPU cores described as a "Trusted Control/Compute Unit" that can be
used as a BMC in servers. In addition to the usual I/O, this one
comes with 10GBit ethernet and and a 4TOPS NPU.
- Sophgo SG2000 is an embedded chip that comes with both RISC-V and
Arm cores that can run Linux. This was already supported for RISC-V
but now it also works on Arm
One more chip, the Black Sesame C1200 did not make it in tirm for the
merge window"
* tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
arm64: defconfig: Enable rudimentary Sophgo SG2000 support
arm64: Add SOPHGO SOC family Kconfig support
arm64: dts: sophgo: Add Duo Module 01 Evaluation Board
arm64: dts: sophgo: Add Duo Module 01
arm64: dts: sophgo: Add initial SG2000 SoC device tree
MAINTAINERS: Add entry for Axiado
arm64: defconfig: enable the Axiado family
arm64: dts: axiado: Add initial support for AX3000 SoC and eval board
arm64: add Axiado SoC family
dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller
dt-bindings: serial: cdns: add Axiado AX3000 UART controller
dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant
dt-bindings: gpio: cdns: convert to YAML
dt-bindings: arm: axiado: add AX3000 EVK compatible strings
dt-bindings: vendor-prefixes: Add Axiado Corporation
MAINTAINERS: Add CIX SoC maintainer entry
arm64: dts: cix: Add sky1 base dts initial support
dt-bindings: clock: cix: Add CIX sky1 scmi clock id
arm64: defconfig: Enable CIX SoC
mailbox: add CIX mailbox driver
...
There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now.
- exynos2200 is a recent high-end mobile phone chip used in a
few Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it.
There are five more chips in a separate branch, as those are new
chip families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly
added machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and
Sophgo sg2042.
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95.
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm.
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5.
-----BEGIN PGP SIGNATURE-----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=0VBL
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now
- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it
There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly added
machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"
* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
Here is the big set of USB and Thunderbolt driver changes for 6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates, no
major new features this development cycle. Stuff included in here is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are "obviously
correct" :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeVLw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn3RACgg394VU3ENwqvkh1iF95fVwVheJYAn08YUeoM
98vPdogv4+kuC3B0TbiM
=7pfy
-----END PGP SIGNATURE-----
Merge tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates,
no major new features this development cycle. Stuff included in here
is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are
'obviously correct' :)"
* tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (100 commits)
usb: musb: omap2430: clean up probe error handling
usb: musb: omap2430: fix device leak at unbind
usb: gadget: udc: renesas_usb3: fix device leak at unbind
usb: dwc3: meson-g12a: fix device leaks at unbind
usb: dwc3: imx8mp: fix device leak at unbind
usb: musb: omap2430: enable compile testing
usb: gadget: udc: renesas_usb3: drop unused module alias
usb: xhci: print xhci->xhc_state when queue_command failed
usb: atm: cxacru: Merge cxacru_upload_firmware() into cxacru_heavy_init()
USB: serial: option: add Foxconn T99W709
usb: core: add urb->sgt parameter description
thunderbolt: Fix copy+paste error in match_service_id()
usb: typec: ucsi: Update power_supply on power role change
usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
usb: typec: fusb302: cache PD RX state
usb: typec: ucsi: yoga-c630: add DRM dependency
usb: gadget : fix use-after-free in composite_dev_cleanup()
usb: chipidea: imx: Add a missing blank line
usb: gadget: f_uac1: replace scnprintf() with sysfs_emit()
usb: usblp: clean up assignment inside if conditions
...
These are two fixes that came in late, one addresses a regression
on a rockchips based board, the other is for ensuring a consistent
dt binding for a device added in 6.16 before the incorrect one
makes it into a release.
-----BEGIN PGP SIGNATURE-----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=qwRh
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are two fixes that came in late, one addresses a regression on a
rockchips based board, the other is for ensuring a consistent dt
binding for a device added in 6.16 before the incorrect one makes it
into a release"
* tag 'soc-fixes-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: rockchip: Drop netdev led-triggers on NanoPi R5S
arm64: dts: allwinner: a523: Rename emac0 to gmac0
Only one fix:
Correct the name of the A523's EMAC0 to GMAC0, as seen in the SoC's
datasheets. The matching DT binding change is in the net tree.
-----BEGIN PGP SIGNATURE-----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=j8oj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmiEp40ACgkQmmx57+YA
GNnQ9w//YpHI9/IqYMspsOk+ML2JLsRlbYWzmrZPAnWdQtFQ+sthqkr6bSA5zohn
DQp04yGB5YPHD/R6n4Us2K0tb/UFQLQl2s9Owg0xZkoAdqwoRTBKP2nnYh5mtoK8
pf7KgfiMWi29rqNZmEPbk9onrhXIhAaLNJomIbDBaY3rsMxNnuEdDN+KO6mwTcrf
RtBJqQKNeVbVniqmVn7o3IJiN5hLPKPrZ9r2FkX+K/0GHh4PPkQNyUJHLhvdsady
1EFPUqTqTp9ykPMj5KZ1TBs05dEBexMYPeGfZdTbLN6sXJQrAy9JN5XrSg6QffX0
NbzeO8r0YnwA2bsFnoF7xIUCdGvuI2jc4bvtVPt2wPrjINmSA83RJstJZcm1r/Uh
qIFGYqgUJotqRzEJkOTvce32OG9T/Q7DcbC0uFenXjMdLU9hV6MDEFpPj2t875xr
Y6P4dzp4TcR/28OA/nrmYhOV6Y7LOVzW7Y2D23iYltA62/GPR/dzlthw+nzYLecu
6/T4sH/LtACHmZNbbdAtf07rZmMYg1K16HJLcHxm5egp27AxIqujsy+kFVdtASXn
Fc43ISthJVmdCVg7LHhVr5NrkKbgk4GZgZ5uL94+mYxZBMyMEdUP9Jqn/BjMaXt6
WPzkP/PZNEAlogAS6LSumMJvCcmrJdbCGplMWkUliMAgjbpL2e0=
=xPoN
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner fixes for 6.16
Only one fix:
Correct the name of the A523's EMAC0 to GMAC0, as seen in the SoC's
datasheets. The matching DT binding change is in the net tree.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a UFS host controller interface (UFSHCI) node to mt8195.dtsi.
Introduce the 'mediatek,ufs-disable-mcq' property to allow disabling
Multiple Circular Queue (MCQ) support.
Signed-off-by: Rice Lee <ot_riceyj.lee@mediatek.com>
Signed-off-by: Eric Lin <ht.lin@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20250722085721.2062657-4-macpaul.lin@mediatek.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sophgo:
Add support for Duo Module 01 Evaluation Board.
This board uses SG2000(old codename CV181xH),
which is dual-arch, RISC-V and ARM64. This
patch add the support for ARM64.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
-----BEGIN PGP SIGNATURE-----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=v6O6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=SQbL
-----END PGP SIGNATURE-----
Merge tag 'arm-sophgo-dt-for-v6.17' of https://github.com/sophgo/linux into soc/newsoc
ARM Devicetrees for v6.17
Sophgo:
Add support for Duo Module 01 Evaluation Board.
This board uses SG2000(old codename CV181xH),
which is dual-arch, RISC-V and ARM64. This
patch add the support for ARM64.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'arm-sophgo-dt-for-v6.17' of https://github.com/sophgo/linux:
arm64: defconfig: Enable rudimentary Sophgo SG2000 support
arm64: Add SOPHGO SOC family Kconfig support
arm64: dts: sophgo: Add Duo Module 01 Evaluation Board
arm64: dts: sophgo: Add Duo Module 01
arm64: dts: sophgo: Add initial SG2000 SoC device tree
Link: https://lore.kernel.org/r/MAUPR01MB11072C4B088AAC02268044E95FE5FA@MAUPR01MB11072.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Duo Module 01 is a compact module with integrated SG2000,
WI-FI6/BTDM5.4, and eMMC.
Add only support for UART and SDHCI.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20250612132844.767216-4-alexander.sverdlin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
Add initial device tree for the SG2000 SoC by SOPHGO (from ARM64 PoV).
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250612132844.767216-3-alexander.sverdlin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
- Added the bindings and nodes for Apple SoC GPU. The driver itself
isn't ready for upstreaming yet due to rust dependencies but we're
confident that the bindings are stable at this point.
- Added a missing node for the touchbar framebuffer to Apple T2 device
trees, which is the BMC for some x86 Macs
- Fixed a W=1 warning by adding bit offsets to NVMEM node names. This
required a change to the generic NVMEM cell binding which will be part
of 6.17 through the NVMEM tree.
Signed-off-by: Sven Peter <sven@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS3vz815OHsEaWy0u9EEX0kKnUe6QUCaH+8XwAKCRBEEX0kKnUe
6ZgFAQCOqbUyJPz0oxSTrrHQRwumhx0P6CIhVBtSaOtDnHYBJwD8CpPxfXXqMvgm
Wqr/bugw4pnR/LZRTScSoiqlwT3gZQs=
=L1MH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=um3t
-----END PGP SIGNATURE-----
Merge tag 'apple-soc-dt-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/dt
Apple SoC device tree changes for v6.17
- Added the bindings and nodes for Apple SoC GPU. The driver itself
isn't ready for upstreaming yet due to rust dependencies but we're
confident that the bindings are stable at this point.
- Added a missing node for the touchbar framebuffer to Apple T2 device
trees, which is the BMC for some x86 Macs
- Fixed a W=1 warning by adding bit offsets to NVMEM node names. This
required a change to the generic NVMEM cell binding which will be part
of 6.17 through the NVMEM tree.
Signed-off-by: Sven Peter <sven@kernel.org>
* tag 'apple-soc-dt-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux:
arm64: dts: apple: Add Apple SoC GPU
dt-bindings: gpu: Add Apple SoC GPU
arm64: dts: apple: t8012-j132: Include touchbar framebuffer node
arm64: dts: apple: Add bit offset to PMIC NVMEM node names
Link: https://lore.kernel.org/r/20250722163258.62424-2-sven@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Camera support for the PinePhone Pro.
A bunch of cleanups to make DTC happier, fix ordering of DMA uart
channels on rk3528 and some video output enablement as well as some
button definitions.
An interesting tidbit is the reset behaviour addition in that some
boards have specific requirements as to how the PMIC needs to do the
restart. DT-maintainers did not consider the header with helper-constants
as part of the binding, so that header ended up in the Rockchip directory
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmh6tRwQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgbsjCACMBjOtz2pLx0K76/51SGDzM12+ORi5K/ev
In1kcYSOIJySrQCUPDpma+k/JwptphdQlOfy4pewu/QFUaFln8ei9YGaQtmmyHTi
d/tDbv9/1bnCvTG8m9wbOkVYpLxvGMfpFZFH3WvNib4oaSxyc34q4zW0T1VTl0DZ
s3Q57dZsH0VnijFoj1VKz7gjz8jSuO6LksaYVcb7U4b9GQOCfMS1iDs1UJnfG1Xg
z4molRvAU5rfzlNNRnHIEAeh42b9tOU+jFy7Qlig7RD2eM0BudyziGau3nQGjEP3
WjDCfwHRo62EOoUSBRbdD9wCD6QsZJteSLMCA/J8EAA0xraEvKYy
=65EK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=bA8m
-----END PGP SIGNATURE-----
Merge tag 'v6.17-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New board: FriendlyElec NanoPi M5
Camera support for the PinePhone Pro.
A bunch of cleanups to make DTC happier, fix ordering of DMA uart
channels on rk3528 and some video output enablement as well as some
button definitions.
An interesting tidbit is the reset behaviour addition in that some
boards have specific requirements as to how the PMIC needs to do the
restart. DT-maintainers did not consider the header with helper-constants
as part of the binding, so that header ended up in the Rockchip directory
* tag 'v6.17-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits)
arm64: dts: rockchip: Add maskrom button to NanoPi R5S + R5C
arm64: dts: rockchip: Drop regulator-compatible property on rk3399
arm64: dts: rockchip: Drop unneeded address+size-cells on px30
arm64: dts: rockchip: Fix LCD panel port on rk3566-pinetab2
arm64: dts: rockchip: Move mipi_out node on rk3399 haikou demo dtso
arm64: dts: rockchip: Simplify mipi_out endpoint on rk3399 RP64 dtso
arm64: dts: rockchip: Simplify edp endpoints on several rk3399 boards
arm64: dts: rockchip: Simplify VOP port definition on rk3328
arm64: dts: rockchip: Move dsi address+size-cells from SoC to rk3399 boards
arm64: dts: rockchip: Move dsi address+size-cells from SoC to px30 boards
arm64: dts: rockchip: Fix UART DMA support for RK3528
arm64: dts: rockchip: Add reset button to NanoPi R5S
arm64: dts: rockchip: Add rtc0 alias for NanoPi R5S + R5C
arm64: dts: rockchip: describe the OV8858 user camera on PinePhone Pro
arm64: dts: rockchip: describe I2c Bus 1 and IMX258 world camera on PinePhone Pro
arm64: dts: rockchip: Fix pinctrl node names for RK3528
arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support
dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board
arm64: dts: rockchip: force PMIC reset behavior to restart PMU on RK3588 Tiger
arm64: dts: rockchip: force PMIC reset behavior to restart PMU on RK3588 Jaguar
...
Link: https://lore.kernel.org/r/11552292.NyiUUSuA9g@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Sometimes the netdev triggers causes tasks to get blocked for more then
120 seconds, which in turn makes the (WAN) network port on the NanoPi
R5S fail to come up.
This results in the following (partial) trace:
INFO: task kworker/0:1:11 blocked for more than 120 seconds.
Not tainted 6.16-rc6+unreleased-arm64-cknow #1 Debian 6.16~rc6-1~exp1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:1 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208060 flags:0x00000010
Workqueue: events_power_efficient reg_check_chans_work [cfg80211]
Call trace:
__switch_to+0xf8/0x168 (T)
__schedule+0x3f8/0xda8
schedule+0x3c/0x120
schedule_preempt_disabled+0x2c/0x58
__mutex_lock.constprop.0+0x4d0/0xab8
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x50/0x68
rtnl_lock+0x20/0x38
reg_check_chans_work+0x40/0x478 [cfg80211]
process_one_work+0x178/0x3e0
worker_thread+0x260/0x390
kthread+0x150/0x250
ret_from_fork+0x10/0x20
INFO: task kworker/0:1:11 is blocked on a mutex likely owned by task dhcpcd:615.
task:dhcpcd state:D stack:0 pid:615 tgid:615 ppid:614 task_flags:0x400140 flags:0x00000018
Call trace:
__switch_to+0xf8/0x168 (T)
__schedule+0x3f8/0xda8
schedule+0x3c/0x120
schedule_preempt_disabled+0x2c/0x58
rwsem_down_write_slowpath+0x1e4/0x750
down_write+0x98/0xb0
led_trigger_register+0x134/0x1c0
phy_led_triggers_register+0xf4/0x258 [libphy]
phy_attach_direct+0x30c/0x390 [libphy]
phylink_fwnode_phy_connect+0xb0/0x138 [phylink]
__stmmac_open+0xec/0x520 [stmmac]
stmmac_open+0x4c/0xe8 [stmmac]
__dev_open+0x130/0x2e0
__dev_change_flags+0x1c4/0x248
netif_change_flags+0x2c/0x80
dev_change_flags+0x88/0xc8
devinet_ioctl+0x35c/0x610
inet_ioctl+0x204/0x260
sock_do_ioctl+0x6c/0x140
sock_ioctl+0x2e4/0x388
__arm64_sys_ioctl+0xb4/0x120
invoke_syscall+0x6c/0x100
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x188
el0t_64_sync_handler+0x10c/0x140
el0t_64_sync+0x198/0x1a0
In order to not introduce a regression with kernel 6.16, drop the netdev
triggers for now while the problem is being investigated further.
Fixes: 1631cbdb80 ("arm64: dts: rockchip: Improve LED config for NanoPi R5S")
Helped-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250722123628.25660-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Support for the AX3000 SoC, from Harshit Shah <hshah@axiado.com>:
The AX3000 is a multi-core system-on-chip featuring four ARM Cortex-A53
cores, secure vault, hardware firewall, and AI acceleration engines. This
initial support enables basic bring-up of the SoC and evaluation platform
with CPU, timer, UART, and I3C functionality.
The series begins by adding the "axiado" vendor prefix and compatible
strings for the SoC and board. It then introduces the device tree files
and minimal ARCH_AXIADO platform support in arm64.
* newsoc/axiado:
MAINTAINERS: Add entry for Axiado
arm64: defconfig: enable the Axiado family
arm64: dts: axiado: Add initial support for AX3000 SoC and eval board
arm64: add Axiado SoC family
dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller
dt-bindings: serial: cdns: add Axiado AX3000 UART controller
dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant
dt-bindings: gpio: cdns: convert to YAML
dt-bindings: arm: axiado: add AX3000 EVK compatible strings
dt-bindings: vendor-prefixes: Add Axiado Corporation
Add initial device tree support for the AX3000 SoC and its evaluation
platform. The AX3000 is a multi-core SoC featuring 4 Cortex-A53 cores,
Secure Vault, AI Engine and Firewall.
It adds support for Cortex-A53 CPUs, timer, UARTs, and I3C
controllers on the AX3000 evaluation board.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>