commit 971843c511 upstream.
Orphan info is now getting allocated with kvmalloc_array(). Free it with
kvfree() instead of kfree() to avoid complaints from mm.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 0a6ce20c15 ("ext4: verify orphan file size is not too big")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Message-ID: <20251007134936.7291-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44d2a72f4d upstream.
During xattr block validation, check_xattrs() processes xattr entries
without validating that entries claiming to use EA inodes have non-zero
sizes. Corrupted filesystems may contain xattr entries where e_value_size
is zero but e_value_inum is non-zero, indicating invalid xattr data.
Add validation in check_xattrs() to detect this corruption pattern early
and return -EFSCORRUPTED, preventing invalid xattr entries from causing
issues throughout the ext4 codebase.
Cc: stable@kernel.org
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: syzbot+4c9d23743a2409b80293@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=4c9d23743a2409b80293
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Message-ID: <20250923133245.1091761-1-kartikey406@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57295e8354 upstream.
syzkaller found a path where ext4_xattr_inode_update_ref() reads an EA
inode refcount that is already <= 0 and then applies ref_change (often
-1). That lets the refcount underflow and we proceed with a bogus value,
triggering errors like:
EXT4-fs error: EA inode <n> ref underflow: ref_count=-1 ref_change=-1
EXT4-fs warning: ea_inode dec ref err=-117
Make the invariant explicit: if the current refcount is non-positive,
treat this as on-disk corruption, emit ext4_error_inode(), and fail the
operation with -EFSCORRUPTED instead of updating the refcount. Delete the
WARN_ONCE() as negative refcounts are now impossible; keep error reporting
in ext4_error_inode().
This prevents the underflow and the follow-on orphan/cleanup churn.
Reported-by: syzbot+0be4f339a8218d2a5bb1@syzkaller.appspotmail.com
Fixes: https://syzbot.org/bug?extid=0be4f339a8218d2a5bb1
Cc: stable@kernel.org
Co-developed-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Ahmet Eray Karadag <eraykrdg1@gmail.com>
Message-ID: <20250920021342.45575-1-eraykrdg1@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12e803c882 upstream.
During the movement of a written extent, mext_page_mkuptodate() is
called to read data in the range [from, to) into the page cache and to
update the corresponding buffers. Therefore, we should not wait on any
buffer whose start offset is >= 'to'. Otherwise, it will return -EIO and
fail the extents movement.
$ for i in `seq 3 -1 0`; \
do xfs_io -fs -c "pwrite -b 1024 $((i * 1024)) 1024" /mnt/foo; \
done
$ umount /mnt && mount /dev/pmem1s /mnt # drop cache
$ e4defrag /mnt/foo
e4defrag 1.47.0 (5-Feb-2023)
ext4 defragmentation for /mnt/foo
[1/1]/mnt/foo: 0% [ NG ]
Success: [0/1]
Cc: stable@kernel.org
Fixes: a40759fb16 ("ext4: remove array of buffer_heads from mext_page_mkuptodate()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250912105841.1886799-1-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ecb790ea8 upstream.
Unlike other strings in the ext4 superblock, we rely on tune2fs to
make sure s_mount_opts is NUL terminated. Harden
parse_apply_sb_mount_options() by treating s_mount_opts as a potential
__nonstring.
Cc: stable@vger.kernel.org
Fixes: 8b67f04ab9 ("ext4: Add mount options in superblock")
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Message-ID: <20250916-tune2fs-v2-1-d594dc7486f0@mit.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46c22a8bb4 upstream.
Currently, our handling of metadata is _ambiguous_ in some scenarios,
that is, we end up returning unknown if the range only covers the
mapping partially.
For example, in the following case:
$ xfs_io -c fsmap -d
0: 254:16 [0..7]: static fs metadata 8
1: 254:16 [8..15]: special 102:1 8
2: 254:16 [16..5127]: special 102:2 5112
3: 254:16 [5128..5255]: special 102:3 128
4: 254:16 [5256..5383]: special 102:4 128
5: 254:16 [5384..70919]: inodes 65536
6: 254:16 [70920..70967]: unknown 48
...
$ xfs_io -c fsmap -d 24 33
0: 254:16 [24..39]: unknown 16 <--- incomplete reporting
$ xfs_io -c fsmap -d 24 33 (With patch)
0: 254:16 [16..5127]: special 102:2 5112
This is because earlier in ext4_getfsmap_meta_helper, we end up ignoring
any extent that starts before our queried range, but overlaps it. While
the man page [1] is a bit ambiguous on this, this fix makes the output
make more sense since we are anyways returning an "unknown" extent. This
is also consistent to how XFS does it:
$ xfs_io -c fsmap -d
...
6: 254:16 [104..127]: free space 24
7: 254:16 [128..191]: inodes 64
...
$ xfs_io -c fsmap -d 137 150
0: 254:16 [128..191]: inodes 64 <-- full extent returned
[1] https://man7.org/linux/man-pages/man2/ioctl_getfsmap.2.html
Reported-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <023f37e35ee280cd9baac0296cbadcbe10995cab.1757058211.git.ojaswin@linux.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d80eaa1a1 upstream.
After running a stress test combined with fault injection,
we performed fsck -a followed by fsck -fn on the filesystem
image. During the second pass, fsck -fn reported:
Inode 131512, end of extent exceeds allowed value
(logical block 405, physical block 1180540, len 2)
This inode was not in the orphan list. Analysis revealed the
following call chain that leads to the inconsistency:
ext4_da_write_end()
//does not update i_disksize
ext4_punch_hole()
//truncate folio, keep size
ext4_page_mkwrite()
ext4_block_page_mkwrite()
ext4_block_write_begin()
ext4_get_block()
//insert written extent without update i_disksize
journal commit
echo 1 > /sys/block/xxx/device/delete
da-write path updates i_size but does not update i_disksize. Then
ext4_punch_hole truncates the da-folio yet still leaves i_disksize
unchanged(in the ext4_update_disksize_before_punch function, the
condition offset + len < size is met). Then ext4_page_mkwrite sees
ext4_nonda_switch return 1 and takes the nodioread_nolock path, the
folio about to be written has just been punched out, and it’s offset
sits beyond the current i_disksize. This may result in a written
extent being inserted, but again does not update i_disksize. If the
journal gets committed and then the block device is yanked, we might
run into this. It should be noted that replacing ext4_punch_hole with
ext4_zero_range in the call sequence may also trigger this issue, as
neither will update i_disksize under these circumstances.
To fix this, we can modify ext4_update_disksize_before_punch to
increase i_disksize to min(i_size, offset + len) when both i_size and
(offset + len) are greater than i_disksize.
Cc: stable@kernel.org
Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Message-ID: <20250911133024.1841027-1-sunyongjian@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a6ce20c15 upstream.
In principle orphan file can be arbitrarily large. However orphan replay
needs to traverse it all and we also pin all its buffers in memory. Thus
filesystems with absurdly large orphan files can lead to big amounts of
memory consumed. Limit orphan file size to a sane value and also use
kvmalloc() for allocating array of block descriptor structures to avoid
large order allocations for sane but large orphan files.
Reported-by: syzbot+0b92850d68d9b12934f5@syzkaller.appspotmail.com
Fixes: 02f310fcf4 ("ext4: Speedup ext4 orphan inode handling")
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Message-ID: <20250909112206.10459-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 963845748f upstream.
Commit bc264fea0f ("iomap: support incremental iomap_iter advances")
changed the error handling logic in iomap_iter(). Previously any error
from iomap_dio_bio_iter() got propagated to userspace, after this commit
if ->iomap_end returns error, it gets propagated to userspace instead of
an error from iomap_dio_bio_iter(). This results in unaligned writes to
ext4 to silently fallback to buffered IO instead of erroring out.
Now returning ENOTBLK for DIO writes from ext4_iomap_end() seems
unnecessary these days. It is enough to return ENOTBLK from
ext4_iomap_begin() when we don't support DIO write for that particular
file offset (due to hole).
Fixes: bc264fea0f ("iomap: support incremental iomap_iter advances")
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Message-ID: <20250901112739.32484-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8b90e6387 upstream.
The implicit __GFP_NOFAIL flag in ext4_sb_bread() was removed in commit
8a83ac5494 ("ext4: call bdev_getblk() from sb_getblk_gfp()"), meaning
the function can now fail under memory pressure.
Most callers of ext4_sb_bread() propagate the error to userspace and do not
remount the filesystem read-only. However, ext4_free_branches() handles
ext4_sb_bread() failure by remounting the filesystem read-only.
This implies that an ext3 filesystem (mounted via the ext4 driver) could be
forcibly remounted read-only due to a transient page allocation failure,
which is unacceptable.
To mitigate this, introduce a new helper function, ext4_sb_bread_nofail(),
which explicitly uses __GFP_NOFAIL, and use it in ext4_free_branches().
Fixes: 8a83ac5494 ("ext4: call bdev_getblk() from sb_getblk_gfp()")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit acf943e976 upstream.
When orphan file feature is enabled, inode can be tracked as orphan
either in the standard orphan list or in the orphan file. The first can
be tested by checking ei->i_orphan list head, the second is recorded by
EXT4_STATE_ORPHAN_FILE inode state flag. There are several places where
we want to check whether inode is tracked as orphan and only some of
them properly check for both possibilities. Luckily the consequences are
mostly minor, the worst that can happen is that we track an inode as
orphan although we don't need to and e2fsck then complains (resulting in
occasional ext4/307 xfstest failures). Fix the problem by introducing a
helper for checking whether an inode is tracked as orphan and use it in
appropriate places.
Fixes: 4a79a98c7b ("ext4: Improve scalability of ext4 orphan file handling")
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Message-ID: <20250925123038.20264-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Fix fast commit checks for file systems with ea_inode enabled
* Don't drop the i_version mount option on a remount
* Fix FIEMAP reporting when there are holes in a bigalloc file system
* Don't fail when mounting read-only when there are inodes in the
orphan file
* Fix hole length overflow for indirect mapped files on file systems
with an 8k or 16k block file system.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmijEhcACgkQ8vlZVpUN
gaNAhAf/YfJZ/S+cm1hNBEBA2l874MH6NGVjc19JMp9nXhBkFKXw7xsvMEM4IN5v
EogWLCkGxszbPjtDMJvvLTf0YU8sC4YsOaxZsx2PhYYNt7xCipEAvszQ0HsC1ItU
eUkk0uhQM6VzeHgO30i+vHdvpt9YvfvrJBtXsa8fFLi6+ORMArc4dttV8RWfkkTR
xFt5Y3MdBK9bmBG4AQGN4REL3YkTKbVoFq7zS0e8/5Gk4HO9ttduDPPWHGIrDRUh
T3pv/ADenHytkiLOVOnTnxioSD2QaYy0eI0TOqNyprLOfE1e8w3VtPAviJMXxKe3
cwaXyvtcjCJQiboRPt4S9w1hPWvKvA==
=PwYy
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
- Fix fast commit checks for file systems with ea_inode enabled
- Don't drop the i_version mount option on a remount
- Fix FIEMAP reporting when there are holes in a bigalloc file system
- Don't fail when mounting read-only when there are inodes in the
orphan file
- Fix hole length overflow for indirect mapped files on file systems
with an 8k or 16k block file system
* tag 'ext4_for_linus-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: prevent softlockup in jbd2_log_do_checkpoint()
ext4: fix incorrect function name in comment
ext4: use kmalloc_array() for array space allocation
ext4: fix hole length calculation overflow in non-extent inodes
ext4: don't try to clear the orphan_present feature block device is r/o
ext4: fix reserved gdt blocks handling in fsmap
ext4: fix fsmap end of range reporting with bigalloc
ext4: remove redundant __GFP_NOWARN
ext4: fix unused variable warning in ext4_init_new_dir
ext4: remove useless if check
ext4: check fast symlink for ea_inode correctly
ext4: preserve SB_I_VERSION on remount
ext4: show the default enabled i_version option
Since commit 6b730a4050 “ext4: hoist ext4_block_write_begin and
replace the __block_write_begin”, the comment should be updated
accordingly from "__block_write_begin" to "ext4_block_write_begin".
Fixes: 6b730a4050 (“ext4: hoist ext4_block_write_begin and replace...")
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/20250812021709.1120716-1-liubaolin12138@163.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When the file system is frozen in preparation for taking an LVM
snapshot, the journal is checkpointed and if the orphan_file feature
is enabled, and the orphan file is empty, we clear the orphan_present
feature flag. But if there are pending inodes that need to be removed
the orphan_present feature flag can't be cleared.
The problem comes if the block device is read-only. In that case, we
can't process the orphan inode list, so it is skipped in
ext4_orphan_cleanup(). But then in ext4_mark_recovery_complete(),
this results in the ext4 error "Orphan file not empty on read-only fs"
firing and the file system mount is aborted.
Fix this by clearing the needs_recovery flag in the block device is
read-only. We do this after the call to ext4_load_and_init-journal()
since there are some error checks need to be done in case the journal
needs to be replayed and the block device is read-only, or if the
block device containing the externa journal is read-only, etc.
Cc: stable@kernel.org
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1108271
Cc: stable@vger.kernel.org
Fixes: 02f310fcf4 ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In some cases like small FSes with no meta_bg and where the resize
doesn't need extra gdt blocks as it can fit in the current one,
s_reserved_gdt_blocks is set as 0, which causes fsmap to emit a 0
length entry, which is incorrect.
$ mkfs.ext4 -b 65536 -O bigalloc /dev/sda 5G
$ mount /dev/sda /mnt/scratch
$ xfs_io -c "fsmap -d" /mnt/scartch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [128..255]: special 102:1 128
2: 253:48 [256..255]: special 102:2 0 <---- 0 len entry
3: 253:48 [256..383]: special 102:3 128
Fix this by adding a check for this case.
Cc: stable@kernel.org
Fixes: 0c9ec4beec ("ext4: support GETFSMAP ioctls")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/08781b796453a5770112aa96ad14c864fbf31935.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With bigalloc enabled, the logic to report last extent has a bug since
we try to use cluster units instead of block units. This can cause an
issue where extra incorrect entries might be returned back to the
user. This was flagged by generic/365 with 64k bs and -O bigalloc.
** Details of issue **
The issue was noticed on 5G 64k blocksize FS with -O bigalloc which has
only 1 bg.
$ xfs_io -c "fsmap -d" /mnt/scratch
0: 253:48 [0..127]: static fs metadata 128 /* sb */
1: 253:48 [128..255]: special 102:1 128 /* gdt */
3: 253:48 [256..383]: special 102:3 128 /* block bitmap */
4: 253:48 [384..2303]: unknown 1920 /* flex bg empty space */
5: 253:48 [2304..2431]: special 102:4 128 /* inode bitmap */
6: 253:48 [2432..4351]: unknown 1920 /* flex bg empty space */
7: 253:48 [4352..6911]: inodes 2560
8: 253:48 [6912..538623]: unknown 531712
9: 253:48 [538624..10485759]: free space 9947136
The issue can be seen with:
$ xfs_io -c "fsmap -d 0 3" /mnt/scratch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [384..2047]: unknown 1664
Only the first entry was expected to be returned but we get 2. This is
because:
ext4_getfsmap_datadev()
first_cluster, last_cluster = 0
...
info->gfi_last = true;
ext4_getfsmap_datadev_helper(sb, end_ag, last_cluster + 1, 0, info);
fsb = C2B(1) = 16
fslen = 0
...
/* Merge in any relevant extents from the meta_list */
list_for_each_entry_safe(p, tmp, &info->gfi_meta_list, fmr_list) {
...
// since fsb = 16, considers all metadata which starts before 16 blockno
iter 1: error = ext4_getfsmap_helper(sb, info, p); // p = sb (0,1), nop
info->gfi_next_fsblk = 1
iter 2: error = ext4_getfsmap_helper(sb, info, p); // p = gdt (1,2), nop
info->gfi_next_fsblk = 2
iter 3: error = ext4_getfsmap_helper(sb, info, p); // p = blk bitmap (2,3), nop
info->gfi_next_fsblk = 3
iter 4: error = ext4_getfsmap_helper(sb, info, p); // p = ino bitmap (18,19)
if (rec_blk > info->gfi_next_fsblk) { // (18 > 3)
// emits an extra entry ** BUG **
}
}
Fix this by directly calling ext4_getfsmap_datadev() with a dummy
record that has fmr_physical set to (end_fsb + 1) instead of
last_cluster + 1. By using the block instead of cluster we get the
correct behavior.
Replacing ext4_getfsmap_datadev_helper() with ext4_getfsmap_helper()
is okay since the gfi_lastfree and metadata checks in
ext4_getfsmap_datadev_helper() are anyways redundant when we only want
to emit the last allocated block of the range, as we have already
taken care of emitting metadata and any last free blocks.
Cc: stable@kernel.org
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Fixes: 4a622e4d47 ("ext4: fix FS_IOC_GETFSMAP handling")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/e7472c8535c9c5ec10f425f495366864ea12c9da.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This if branch is only jumping to 'out' which
is defined just after the branch itself.
Hence this is if-check is a no-op and can be removed.
Address-Coverity-ID: 1647981 ("Incorrect expression (IDENTICAL_BRANCHES)")
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Link: https://patch.msgid.link/20250721200902.1071-1-antonio@mandelbit.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The check for a fast symlink in the presence of only an
external xattr inode is incorrect. If a fast symlink does
not have an xattr block (i_file_acl == 0), but does have
an external xattr inode that increases inode i_blocks, then
the check for a fast symlink will incorrectly fail and
__ext4_iget()->ext4_ind_check_inode() will report the inode
is corrupt when it "validates" i_data[] on the next read:
# ln -s foo /mnt/tmp/bar
# setfattr -h -n trusted.test \
-v "$(yes | head -n 4000)" /mnt/tmp/bar
# umount /mnt/tmp
# mount /mnt/tmp
# ls -l /mnt/tmp
ls: cannot access '/mnt/tmp/bar': Structure needs cleaning
total 4
? l?????????? ? ? ? ? ? bar
# dmesg | tail -1
EXT4-fs error (device dm-8): __ext4_iget:5098:
inode #24578: block 7303014: comm ls: invalid block
(note that "block 7303014" = 0x6f6f66 = "foo" in LE order).
ext4_inode_is_fast_symlink() should check the superblock
EXT4_FEATURE_INCOMPAT_EA_INODE feature flag, not the inode
EXT4_EA_INODE_FL, since the latter is only set on the xattr
inode itself, and not on the inode that uses this xattr.
Cc: stable@vger.kernel.org
Fixes: fc82228a5e ("ext4: support fast symlinks from ext3 file systems")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Li Dongyang <dongyangli@ddn.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/59879
Lustre-bug-id: https://jira.whamcloud.com/browse/LU-19121
Link: https://patch.msgid.link/20250717063709.757077-1-adilger@dilger.ca
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
IMA testing revealed that after an ext4 remount, file accesses triggered
full measurements even without modifications, instead of skipping as
expected when i_version is unchanged.
Debugging showed `SB_I_VERSION` was cleared in reconfigure_super() during
remount due to commit 1ff2030739 ("ext4: unconditionally enable the
i_version counter") removing the fix from commit 960e0ab63b ("ext4: fix
i_version handling on remount").
To rectify this, `SB_I_VERSION` is always set for `fc->sb_flags` in
ext4_init_fs_context(), instead of `sb->s_flags` in __ext4_fill_super(),
ensuring it persists across all mounts.
Cc: stable@kernel.org
Fixes: 1ff2030739 ("ext4: unconditionally enable the i_version counter")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250703073903.6952-2-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Display `i_version` in `/proc/fs/ext4/sdx/options`, even though it's
default enabled. This aids users managing multi-version scenarios and
simplifies debugging.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250703073903.6952-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
- The 4 patch series "mm: ksm: prevent KSM from breaking merging of new
VMAs" from Lorenzo Stoakes addresses an issue with KSM's
PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for
merging with existing adjacent VMAs.
- The 4 patch series "mm/damon: introduce DAMON_STAT for simple and
practical access monitoring" from SeongJae Park adds a new kernel module
which simplifies the setup and usage of DAMON in production
environments.
- The 6 patch series "stop passing a writeback_control to swap/shmem
writeout" from Christoph Hellwig is a cleanup to the writeback code
which removes a couple of pointers from struct writeback_control.
- The 7 patch series "drivers/base/node.c: optimization and cleanups"
from Donet Tom contains largely uncorrelated cleanups to the NUMA node
setup and management code.
- The 4 patch series "mm: userfaultfd: assorted fixes and cleanups" from
Tal Zussman does some maintenance work on the userfaultfd code.
- The 5 patch series "Readahead tweaks for larger folios" from Ryan
Roberts implements some tuneups for pagecache readahead when it is
reading into order>0 folios.
- The 4 patch series "selftests/mm: Tweaks to the cow test" from Mark
Brown provides some cleanups and consistency improvements to the
selftests code.
- The 4 patch series "Optimize mremap() for large folios" from Dev Jain
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
- The 5 patch series "Remove zero_user()" from Matthew Wilcox expunges
zero_user() in favor of the more modern memzero_page().
- The 3 patch series "mm/huge_memory: vmf_insert_folio_*() and
vmf_insert_pfn_pud() fixes" from David Hildenbrand addresses some warts
which David noticed in the huge page code. These were not known to be
causing any issues at this time.
- The 3 patch series "mm/damon: use alloc_migrate_target() for
DAMOS_MIGRATE_{HOT,COLD" from SeongJae Park provides some cleanup and
consolidation work in DAMON.
- The 3 patch series "use vm_flags_t consistently" from Lorenzo Stoakes
uses vm_flags_t in places where we were inappropriately using other
types.
- The 3 patch series "mm/memfd: Reserve hugetlb folios before
allocation" from Vivek Kasireddy increases the reliability of large page
allocation in the memfd code.
- The 14 patch series "mm: Remove pXX_devmap page table bit and pfn_t
type" from Alistair Popple removes several now-unneeded PFN_* flags.
- The 5 patch series "mm/damon: decouple sysfs from core" from SeongJae
Park implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
- The 5 patch series "madvise cleanup" from Lorenzo Stoakes does quite a
lot of cleanup/maintenance work in the madvise() code.
- The 4 patch series "madvise anon_name cleanups" from Vlastimil Babka
provides additional cleanups on top or Lorenzo's effort.
- The 11 patch series "Implement numa node notifier" from Oscar Salvador
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory on/offline
notifier.
- The 6 patch series "Make MIGRATE_ISOLATE a standalone bit" from Zi Yan
cleans up the pageblock isolation code and fixes a potential issue which
doesn't seem to cause any problems in practice.
- The 5 patch series "selftests/damon: add python and drgn based DAMON
sysfs functionality tests" from SeongJae Park adds additional drgn- and
python-based DAMON selftests which are more comprehensive than the
existing selftest suite.
- The 5 patch series "Misc rework on hugetlb faulting path" from Oscar
Salvador fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
- The 3 patch series "cma: factor out allocation logic from
__cma_declare_contiguous_nid" from Mike Rapoport rationalizes and cleans
up the highmem-specific code in the CMA allocator.
- The 28 patch series "mm/migration: rework movable_ops page migration
(part 1)" from David Hildenbrand provides cleanups and
future-preparedness to the migration code.
- The 2 patch series "mm/damon: add trace events for auto-tuned
monitoring intervals and DAMOS quota" from SeongJae Park adds some
tracepoints to some DAMON auto-tuning code.
- The 6 patch series "mm/damon: fix misc bugs in DAMON modules" from
SeongJae Park does that.
- The 6 patch series "mm/damon: misc cleanups" from SeongJae Park also
does what it claims.
- The 4 patch series "mm: folio_pte_batch() improvements" from David
Hildenbrand cleans up the large folio PTE batching code.
- The 13 patch series "mm/damon/vaddr: Allow interleaving in
migrate_{hot,cold} actions" from SeongJae Park facilitates dynamic
alteration of DAMON's inter-node allocation policy.
- The 3 patch series "Remove unmap_and_put_page()" from Vishal Moola
provides a couple of page->folio conversions.
- The 4 patch series "mm: per-node proactive reclaim" from Davidlohr
Bueso implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
- The 14 patch series "mm/damon: remove damon_callback" from SeongJae
Park replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
- The 10 patch series "mm/mremap: permit mremap() move of multiple VMAs"
from Lorenzo Stoakes implements a number of mremap cleanups (of course)
in preparation for adding new mremap() functionality: newly permit the
remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It
still excludes some specialized situations where this cannot be
performed reliably.
- The 3 patch series "drop hugetlb_free_pgd_range()" from Anthony Yznaga
switches some sparc hugetlb code over to the generic version and removes
the thus-unneeded hugetlb_free_pgd_range().
- The 4 patch series "mm/damon/sysfs: support periodic and automated
stats update" from SeongJae Park augments the present
userspace-requested update of DAMON sysfs monitoring files. Automatic
update is now provided, along with a tunable to control the update
interval.
- The 4 patch series "Some randome fixes and cleanups to swapfile" from
Kemeng Shi does what is claims.
- The 4 patch series "mm: introduce snapshot_page" from Luiz Capitulino
and David Hildenbrand provides (and uses) a means by which debug-style
functions can grab a copy of a pageframe and inspect it locklessly
without tripping over the races inherent in operating on the live
pageframe directly.
- The 6 patch series "use per-vma locks for /proc/pid/maps reads" from
Suren Baghdasaryan addresses the large contention issues which can be
triggered by reads from that procfs file. Latencies are reduced by more
than half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
- The 6 patch series "__folio_split() clean up" from Zi Yan cleans up
__folio_split()!
- The 7 patch series "Optimize mprotect() for large folios" from Dev
Jain provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
- The 2 patch series "selftests/mm: reuse FORCE_READ to replace "asm
volatile("" : "+r" (XXX));" and some cleanup" from wang lian does some
cleanup work in the selftests code.
- The 3 patch series "tools/testing: expand mremap testing" from Lorenzo
Stoakes extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
- The 22 patch series "selftests/damon/sysfs.py: test all parameters"
from SeongJae Park extends the DAMON sysfs interface selftest so that it
tests all possible user-requested parameters. Rather than the present
minimal subset.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaIqcCgAKCRDdBJ7gKXxA
jkVBAQCCn9DR1QP0CRk961ot0cKzOgioSc0aA03DPb2KXRt2kQEAzDAz0ARurFhL
8BzbvI0c+4tntHLXvIlrC33n9KWAOQM=
=XsFy
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
- Better scalability for ext4 block allocation
- Fix insufficient credits when writing back large folios
Miscellaneous bug fixes, especially when handling exteded attriutes,
inline data, and fast commit.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmiIQEoACgkQ8vlZVpUN
gaPB9wf/QursT7eLjx9Gz+4PYNWPKptBERQtmmDAnNYxDlEQ28+CHdMdEeiIPPoP
IW1DIHfR7VaTI2K7gy6D5632VAhDDKiXBpIYu1yh3KPClAxjTZbhrif8J5UBXj1K
ZwmCeLDF40jijua4rVKq3Fqf4iTJUyU2NqLpvcze7BZg7FwstXiNJrZ3DjAwi1BW
j/5veWwh/KrNMzT5u0+RpMs4FBrdXQXvwSe/4pSx6d75r6WAdzhgUMy09os1wAWU
3N0JU+R5hAG6iFfbWQRURB6oLMmmxl4x2F7r5BvM27uQtELNLNcxBKZhMW97HpiE
uSwKgo/59DKpWX0xQ2x/yugQIzd62w==
=oPHD
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Major ext4 changes for 6.17:
- Better scalability for ext4 block allocation
- Fix insufficient credits when writing back large folios
Miscellaneous bug fixes, especially when handling exteded attriutes,
inline data, and fast commit"
* tag 'ext4_for_linus_6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (39 commits)
ext4: do not BUG when INLINE_DATA_FL lacks system.data xattr
ext4: implement linear-like traversal across order xarrays
ext4: refactor choose group to scan group
ext4: convert free groups order lists to xarrays
ext4: factor out ext4_mb_scan_group()
ext4: factor out ext4_mb_might_prefetch()
ext4: factor out __ext4_mb_scan_group()
ext4: fix largest free orders lists corruption on mb_optimize_scan switch
ext4: fix zombie groups in average fragment size lists
ext4: merge freed extent with existing extents before insertion
ext4: convert sbi->s_mb_free_pending to atomic_t
ext4: fix typo in CR_GOAL_LEN_SLOW comment
ext4: get rid of some obsolete EXT4_MB_HINT flags
ext4: utilize multiple global goals to reduce contention
ext4: remove unnecessary s_md_lock on update s_mb_last_group
ext4: remove unnecessary s_mb_last_start
ext4: separate stream goal hits from s_bal_goals for better tracking
ext4: add ext4_try_lock_group() to skip busy groups
ext4: initialize superblock fields in the kballoc-test.c kunit tests
ext4: refactor the inline directory conversion and new directory codepaths
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCpgAKCRCRxhvAZXjc
oqfFAQDcy3rROUF3W34KcSi7rDmaKVSX53d1tUoqH+1zDRpSlwEAriKDNC1ybudp
YAnxVzkRHjHs1296WIuwKq5lfhJ60Q4=
=geAl
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fileattr updates from Christian Brauner:
"This introduces the new file_getattr() and file_setattr() system calls
after lengthy discussions.
Both system calls serve as successors and extensible companions to
the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have
started to show their age in addition to being named in a way that
makes it easy to conflate them with extended attribute related
operations.
These syscalls allow userspace to set filesystem inode attributes on
special files. One of the usage examples is the XFS quota projects.
XFS has project quotas which could be attached to a directory. All new
inodes in these directories inherit project ID set on parent
directory.
The project is created from userspace by opening and calling
FS_IOC_FSSETXATTR on each inode. This is not possible for special
files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left
with empty project ID. Those inodes then are not shown in the quota
accounting but still exist in the directory. This is not critical but
in the case when special files are created in the directory with
already existing project quota, these new inodes inherit extended
attributes. This creates a mix of special files with and without
attributes. Moreover, special files with attributes don't have a
possibility to become clear or change the attributes. This, in turn,
prevents userspace from re-creating quota project on these existing
files.
In addition, these new system calls allow the implementation of
additional attributes that we couldn't or didn't want to fit into the
legacy ioctls anymore"
* tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: tighten a sanity check in file_attr_to_fileattr()
tree-wide: s/struct fileattr/struct file_kattr/g
fs: introduce file_getattr and file_setattr syscalls
fs: prepare for extending file_get/setattr()
fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP
selinux: implement inode_file_[g|s]etattr hooks
lsm: introduce new hooks for setting/getting inode fsxattr
fs: split fileattr related helpers into separate file
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCgQAKCRCRxhvAZXjc
os+nAP9LFHUwWO6EBzHJJGEVjJvvzsbzqeYrRFamYiMc5ulPJwD+KW4RIgJa/MWO
pcYE40CacaekD8rFWwYUyszpgmv6ewc=
=wCwp
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull mmap_prepare updates from Christian Brauner:
"Last cycle we introduce f_op->mmap_prepare() in c84bf6dd2b ("mm:
introduce new .mmap_prepare() file callback").
This is preferred to the existing f_op->mmap() hook as it does require
a VMA to be established yet, thus allowing the mmap logic to invoke
this hook far, far earlier, prior to inserting a VMA into the virtual
address space, or performing any other heavy handed operations.
This allows for much simpler unwinding on error, and for there to be a
single attempt at merging a VMA rather than having to possibly
reattempt a merge based on potentially altered VMA state.
Far more importantly, it prevents inappropriate manipulation of
incompletely initialised VMA state, which is something that has been
the cause of bugs and complexity in the past.
The intent is to gradually deprecate f_op->mmap, and in that vein this
series coverts the majority of file systems to using f_op->mmap_prepare.
Prerequisite steps are taken - firstly ensuring all checks for mmap
capabilities use the file_has_valid_mmap_hooks() helper rather than
directly checking for f_op->mmap (which is now not a valid check) and
secondly updating daxdev_mapping_supported() to not require a VMA
parameter to allow ext4 and xfs to be converted.
Commit bb666b7c27 ("mm: add mmap_prepare() compatibility layer for
nested file systems") handles the nasty edge-case of nested file
systems like overlayfs, which introduces a compatibility shim to allow
f_op->mmap_prepare() to be invoked from an f_op->mmap() callback.
This allows for nested filesystems to continue to function correctly
with all file systems regardless of which callback is used. Once we
finally convert all file systems, this shim can be removed.
As a result, ecryptfs, fuse, and overlayfs remain unaltered so they
can nest all other file systems.
We additionally do not update resctl - as this requires an update to
remap_pfn_range() (or an alternative to it) which we defer to a later
series, equally we do not update cramfs which needs a mixed mapping
insertion with the same issue, nor do we update procfs, hugetlbfs,
syfs or kernfs all of which require VMAs for internal state and hooks.
We shall return to all of these later"
* tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: update porting, vfs documentation to describe mmap_prepare()
fs: replace mmap hook with .mmap_prepare for simple mappings
fs: convert most other generic_file_*mmap() users to .mmap_prepare()
fs: convert simple use of generic_file_*_mmap() to .mmap_prepare()
mm/filemap: introduce generic_file_*_mmap_prepare() helpers
fs/xfs: transition from deprecated .mmap hook to .mmap_prepare
fs/ext4: transition from deprecated .mmap hook to .mmap_prepare
fs/dax: make it possible to check dev dax support without a VMA
fs: consistently use can_mmap_file() helper
mm/nommu: use file_has_valid_mmap_hooks() helper
mm: rename call_mmap/mmap_prepare to vfs_mmap/mmap_prepare
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCeQAKCRCRxhvAZXjc
otqEAP9bWFExQtnzrNR+1s4UBfPVDAaTJzDnBWj6z0+Idw9oegEAoxF2ifdCPnR4
t/xWiM4FmSA+9pwvP3U5z3sOReDDsgo=
=WMMB
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fallocate updates from Christian Brauner:
"fallocate() currently supports creating preallocated files
efficiently. However, on most filesystems fallocate() will preallocate
blocks in an unwriten state even if FALLOC_FL_ZERO_RANGE is specified.
The extent state must later be converted to a written state when the
user writes data into this range, which can trigger numerous metadata
changes and journal I/O. This may leads to significant write
amplification and performance degradation in synchronous write mode.
At the moment, the only method to avoid this is to create an empty
file and write zero data into it (for example, using 'dd' with a large
block size). However, this method is slow and consumes a considerable
amount of disk bandwidth.
Now that more and more flash-based storage devices are available it is
possible to efficiently write zeros to SSDs using the unmap write
zeroes command if the devices do not write physical zeroes to the
media.
For example, if SCSI SSDs support the UMMAP bit or NVMe SSDs support
the DEAC bit[1], the write zeroes command does not write actual data
to the device, instead, NVMe converts the zeroed range to a
deallocated state, which works fast and consumes almost no disk write
bandwidth.
This series implements the BLK_FEAT_WRITE_ZEROES_UNMAP feature and
BLK_FLAG_WRITE_ZEROES_UNMAP_DISABLED flag for SCSI, NVMe and
device-mapper drivers, and add the FALLOC_FL_WRITE_ZEROES and
STATX_ATTR_WRITE_ZEROES_UNMAP support for ext4 and raw bdev devices.
fallocate() is subsequently extended with the FALLOC_FL_WRITE_ZEROES
flag. FALLOC_FL_WRITE_ZEROES zeroes a specified file range in such a
way that subsequent writes to that range do not require further
changes to the file mapping metadata. This flag is beneficial for
subsequent pure overwriting within this range, as it can save on block
allocation and, consequently, significant metadata changes"
* tag 'vfs-6.17-rc1.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ext4: add FALLOC_FL_WRITE_ZEROES support
block: add FALLOC_FL_WRITE_ZEROES support
block: factor out common part in blkdev_fallocate()
fs: introduce FALLOC_FL_WRITE_ZEROES to fallocate
dm: clear unmap write zeroes limits when disabling write zeroes
scsi: sd: set max_hw_wzeroes_unmap_sectors if device supports SD_ZERO_*_UNMAP
nvmet: set WZDS and DRB if device enables unmap write zeroes operation
nvme: set max_hw_wzeroes_unmap_sectors if device supports DEAC bit
block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits
A syzbot fuzzed image triggered a BUG_ON in ext4_update_inline_data()
when an inode had the INLINE_DATA_FL flag set but was missing the
system.data extended attribute.
Since this can happen due to a maiciouly fuzzed file system, we
shouldn't BUG, but rather, report it as a corrupted file system.
Add similar replacements of BUG_ON with EXT4_ERROR_INODE() ii
ext4_create_inline_data() and ext4_inline_data_truncate().
Reported-by: syzbot+544248a761451c0df72f@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Although we now perform ordered traversal within an xarray, this is
currently limited to a single xarray. However, we have multiple such
xarrays, which prevents us from guaranteeing a linear-like traversal
where all groups on the right are visited before all groups on the left.
For example, suppose we have 128 block groups, with a target group of 64,
a target length corresponding to an order of 1, and available free groups
of 16 (order 1) and group 65 (order 8):
For linear traversal, when no suitable free block is found in group 64, it
will search in the next block group until group 127, then start searching
from 0 up to block group 63. It ensures continuous forward traversal, which
is consistent with the unidirectional rotation behavior of HDD platters.
Additionally, the block group lock contention during freeing block is
unavoidable. The goal increasing from 0 to 64 indicates that previously
scanned groups (which had no suitable free space and are likely to free
blocks later) and skipped groups (which are currently in use) have newly
freed some used blocks. If we allocate blocks in these groups, the
probability of competing with other processes increases.
For non-linear traversal, we first traverse all groups in order_1. If only
group 16 has free space in this list, we first traverse [63, 128), then
traverse [0, 64) to find the available group 16, and then allocate blocks
in group 16. Therefore, it cannot guarantee continuous traversal in one
direction, thus increasing the probability of contention.
So refactor ext4_mb_scan_groups_xarray() to ext4_mb_scan_groups_xa_range()
to only traverse a fixed range of groups, and move the logic for handling
wrap around to the caller. The caller first iterates through all xarrays
in the range [start, ngroups) and then through the range [0, start). This
approach simulates a linear scan, which reduces contention between freeing
blocks and allocating blocks.
Assume we have the following groups, where "|" denotes the xarray traversal
start position:
order_1_groups: AB | CD
order_2_groups: EF | GH
Traversal order:
Before: C > D > A > B > G > H > E > F
After: C > D > G > H > A > B > E > F
Performance test data follows:
|CPU: Kunpeng 920 | P80 | P1 |
|Memory: 512GB |------------------------|-------------------------|
|960GB SSD (0.5GB/s)| base | patched | base | patched |
|-------------------|-------|----------------|--------|----------------|
|mb_optimize_scan=0 | 19555 | 20049 (+2.5%) | 315636 | 316724 (-0.3%) |
|mb_optimize_scan=1 | 15496 | 19342 (+24.8%) | 323569 | 328324 (+1.4%) |
|CPU: AMD 9654 * 2 | P96 | P1 |
|Memory: 1536GB |------------------------|-------------------------|
|960GB SSD (1GB/s) | base | patched | base | patched |
|-------------------|-------|----------------|--------|----------------|
|mb_optimize_scan=0 | 53192 | 52125 (-2.0%) | 212678 | 215136 (+1.1%) |
|mb_optimize_scan=1 | 37636 | 50331 (+33.7%) | 214189 | 209431 (-2.2%) |
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-18-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This commit converts the `choose group` logic to `scan group` using
previously prepared helper functions. This allows us to leverage xarrays
for ordered non-linear traversal, thereby mitigating the "bouncing" issue
inherent in the `choose group` mechanism.
This also decouples linear and non-linear traversals, leading to cleaner
and more readable code.
Key changes:
* ext4_mb_choose_next_group() is refactored to ext4_mb_scan_groups().
* Replaced ext4_mb_good_group() with ext4_mb_scan_group() in non-linear
traversals, and related functions now return error codes instead of
group info.
* Added ext4_mb_scan_groups_linear() for performing linear scans starting
from a specific group for a set number of times.
* Linear scans now execute up to sbi->s_mb_max_linear_groups times,
so ac_groups_linear_remaining is removed as it's no longer used.
* ac->ac_criteria is now used directly instead of passing cr around.
Also, ac->ac_criteria is incremented directly after groups scan fails
for the corresponding criteria.
* Since we're now directly scanning groups instead of finding a good group
then scanning, the following variables and flags are no longer needed,
s_bal_cX_groups_considered is sufficient.
s_bal_p2_aligned_bad_suggestions
s_bal_goal_fast_bad_suggestions
s_bal_best_avail_bad_suggestions
EXT4_MB_CR_POWER2_ALIGNED_OPTIMIZED
EXT4_MB_CR_GOAL_LEN_FAST_OPTIMIZED
EXT4_MB_CR_BEST_AVAIL_LEN_OPTIMIZED
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-17-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
While traversing the list, holding a spin_lock prevents load_buddy, making
direct use of ext4_try_lock_group impossible. This can lead to a bouncing
scenario where spin_is_locked(grp_A) succeeds, but ext4_try_lock_group()
fails, forcing the list traversal to repeatedly restart from grp_A.
In contrast, linear traversal directly uses ext4_try_lock_group(),
avoiding this bouncing. Therefore, we need a lockless, ordered traversal
to achieve linear-like efficiency.
Therefore, this commit converts both average fragment size lists and
largest free order lists into ordered xarrays.
In an xarray, the index represents the block group number and the value
holds the block group information; a non-empty value indicates the block
group's presence.
While insertion and deletion complexity remain O(1), lookup complexity
changes from O(1) to O(nlogn), which may slightly reduce single-threaded
performance.
Additionally, xarray insertions might fail, potentially due to memory
allocation issues. However, since we have linear traversal as a fallback,
this isn't a major problem. Therefore, we've only added a warning message
for insertion failures here.
A helper function ext4_mb_find_good_group_xarray() is added to find good
groups in the specified xarray starting at the specified position start,
and when it reaches ngroups-1, it wraps around to 0 and then to start-1.
This ensures an ordered traversal within the xarray.
Performance test results are as follows: Single-process operations
on an empty disk show negligible impact, while multi-process workloads
demonstrate a noticeable performance gain.
|CPU: Kunpeng 920 | P80 | P1 |
|Memory: 512GB |------------------------|-------------------------|
|960GB SSD (0.5GB/s)| base | patched | base | patched |
|-------------------|-------|----------------|--------|----------------|
|mb_optimize_scan=0 | 20097 | 19555 (-2.6%) | 316141 | 315636 (-0.2%) |
|mb_optimize_scan=1 | 13318 | 15496 (+16.3%) | 325273 | 323569 (-0.5%) |
|CPU: AMD 9654 * 2 | P96 | P1 |
|Memory: 1536GB |------------------------|-------------------------|
|960GB SSD (1GB/s) | base | patched | base | patched |
|-------------------|-------|----------------|--------|----------------|
|mb_optimize_scan=0 | 53603 | 53192 (-0.7%) | 214243 | 212678 (-0.7%) |
|mb_optimize_scan=1 | 20887 | 37636 (+80.1%) | 213632 | 214189 (+0.2%) |
[ Applied spelling fixes per discussion on the ext4-list see thread
referened in the Link tag. --tytso]
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-16-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Extract ext4_mb_scan_group() to make the code clearer and to
prepare for the later conversion of 'choose group' to 'scan groups'.
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-15-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Extract ext4_mb_might_prefetch() to make the code clearer and to
prepare for the later conversion of 'choose group' to 'scan groups'.
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-14-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Extract __ext4_mb_scan_group() to make the code clearer and to
prepare for the later conversion of 'choose group' to 'scan groups'.
No functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-13-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The grp->bb_largest_free_order is updated regardless of whether
mb_optimize_scan is enabled. This can lead to inconsistencies between
grp->bb_largest_free_order and the actual s_mb_largest_free_orders list
index when mb_optimize_scan is repeatedly enabled and disabled via remount.
For example, if mb_optimize_scan is initially enabled, largest free
order is 3, and the group is in s_mb_largest_free_orders[3]. Then,
mb_optimize_scan is disabled via remount, block allocations occur,
updating largest free order to 2. Finally, mb_optimize_scan is re-enabled
via remount, more block allocations update largest free order to 1.
At this point, the group would be removed from s_mb_largest_free_orders[3]
under the protection of s_mb_largest_free_orders_locks[2]. This lock
mismatch can lead to list corruption.
To fix this, whenever grp->bb_largest_free_order changes, we now always
attempt to remove the group from its old order list. However, we only
insert the group into the new order list if `mb_optimize_scan` is enabled.
This approach helps prevent lock inconsistencies and ensures the data in
the order lists remains reliable.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@vger.kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-12-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Groups with no free blocks shouldn't be in any average fragment size list.
However, when all blocks in a group are allocated(i.e., bb_fragments or
bb_free is 0), we currently skip updating the average fragment size, which
means the group isn't removed from its previous s_mb_avg_fragment_size[old]
list.
This created "zombie" groups that were always skipped during traversal as
they couldn't satisfy any block allocation requests, negatively impacting
traversal efficiency.
Therefore, when a group becomes completely full, bb_avg_fragment_size_order
is now set to -1. If the old order was not -1, a removal operation is
performed; if the new order is not -1, an insertion is performed.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-11-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Attempt to merge ext4_free_data with already inserted free extents prior
to adding new ones. This strategy drastically cuts down the number of
times locks are held.
For example, if prev, new, and next extents are all mergeable, the existing
code (before this patch) requires acquiring the s_md_lock three times:
prev merge into new and free prev // hold lock
next merge into new and free next // hold lock
insert new // hold lock
After the patch, it only needs to be acquired once:
new merge into next and free new // no lock
next merge into prev and free next // hold lock
Performance test data follows:
Test: Running will-it-scale/fallocate2 on CPU-bound containers.
Observation: Average fallocate operations per container per second.
|CPU: Kunpeng 920 | P80 | P1 |
|Memory: 512GB |------------------------|-------------------------|
|960GB SSD (0.5GB/s)| base | patched | base | patched |
|-------------------|-------|----------------|--------|----------------|
|mb_optimize_scan=0 | 20043 | 20097 (+0.2%) | 314331 | 316141 (+0.5%) |
|mb_optimize_scan=1 | 7290 | 13318 (+87.4%) | 324226 | 325273 (+0.3%) |
|CPU: AMD 9654 * 2 | P96 | P1 |
|Memory: 1536GB |------------------------|-------------------------|
|960GB SSD (1GB/s) | base | patched | base | patched |
|-------------------|-------|----------------|--------|----------------|
|mb_optimize_scan=0 | 54999 | 53603 (-2.5%) | 214380 | 214243 (-0.06%)|
|mb_optimize_scan=1 | 13497 | 20887 (+54.6%) | 216276 | 213632 (-1.2%) |
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-10-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, s_md_lock was used to protect s_mb_free_pending during
modifications, while smp_mb() ensured fresh reads, so s_md_lock just
guarantees the atomicity of s_mb_free_pending. Thus we optimized it by
converting s_mb_free_pending into an atomic variable, thereby eliminating
s_md_lock and minimizing lock contention. This also prepares for future
lockless merging of free extents.
Following this modification, s_md_lock is exclusively responsible for
managing insertions and deletions within s_freed_data_list, along with
operations involving list_splice.
Performance test data follows:
Test: Running will-it-scale/fallocate2 on CPU-bound containers.
Observation: Average fallocate operations per container per second.
|CPU: Kunpeng 920 | P80 | P1 |
|Memory: 512GB |------------------------|-------------------------|
|960GB SSD (0.5GB/s)| base | patched | base | patched |
|-------------------|-------|----------------|--------|----------------|
|mb_optimize_scan=0 | 19628 | 20043 (+2.1%) | 320885 | 314331 (-2.0%) |
|mb_optimize_scan=1 | 7129 | 7290 (+2.2%) | 321275 | 324226 (+0.9%) |
|CPU: AMD 9654 * 2 | P96 | P1 |
|Memory: 1536GB |------------------------|-------------------------|
|960GB SSD (1GB/s) | base | patched | base | patched |
|-------------------|-------|----------------|--------|----------------|
|mb_optimize_scan=0 | 53760 | 54999 (+2.3%) | 213145 | 214380 (+0.5%) |
|mb_optimize_scan=1 | 12716 | 13497 (+6.1%) | 215262 | 216276 (+0.4%) |
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-9-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since nobody has used these EXT4_MB_HINT flags for ages,
let's remove them.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-7-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When allocating data blocks, if the first try (goal allocation) fails and
stream allocation is on, it tries a global goal starting from the last
group we used (s_mb_last_group). This helps cluster large files together
to reduce free space fragmentation, and the data block contiguity also
accelerates write-back to disk.
However, when multiple processes allocate blocks, having just one global
goal means they all fight over the same group. This drastically lowers
the chances of extents merging and leads to much worse file fragmentation.
To mitigate this multi-process contention, we now employ multiple global
goals, with the number of goals being the minimum between the number of
possible CPUs and one-quarter of the filesystem's total block group count.
To ensure a consistent goal for each inode, we select the corresponding
goal by taking the inode number modulo the total number of goals.
Performance test data follows:
Test: Running will-it-scale/fallocate2 on CPU-bound containers.
Observation: Average fallocate operations per container per second.
|CPU: Kunpeng 920 | P80 | P1 |
|Memory: 512GB |------------------------|-------------------------|
|960GB SSD (0.5GB/s)| base | patched | base | patched |
|-------------------|-------|----------------|--------|----------------|
|mb_optimize_scan=0 | 9636 | 19628 (+103%) | 337597 | 320885 (-4.9%) |
|mb_optimize_scan=1 | 4834 | 7129 (+47.4%) | 341440 | 321275 (-5.9%) |
|CPU: AMD 9654 * 2 | P96 | P1 |
|Memory: 1536GB |------------------------|-------------------------|
|960GB SSD (1GB/s) | base | patched | base | patched |
|-------------------|-------|----------------|--------|----------------|
|mb_optimize_scan=0 | 22341 | 53760 (+140%) | 219707 | 213145 (-2.9%) |
|mb_optimize_scan=1 | 9177 | 12716 (+38.5%) | 215732 | 215262 (+0.2%) |
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-6-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After we optimized the block group lock, we found another lock
contention issue when running will-it-scale/fallocate2 with multiple
processes. The fallocate's block allocation and the truncate's block
release were fighting over the s_md_lock. The problem is, this lock
protects totally different things in those two processes: the list of
freed data blocks (s_freed_data_list) when releasing, and where to start
looking for new blocks (mb_last_group) when allocating.
Now we only need to track s_mb_last_group and no longer need to track
s_mb_last_start, so we don't need the s_md_lock lock to ensure that the
two are consistent. Since s_mb_last_group is merely a hint and doesn't
require strong synchronization, READ_ONCE/WRITE_ONCE is sufficient.
Besides, the s_mb_last_group data type only requires ext4_group_t
(i.e., unsigned int), rendering unsigned long superfluous.
Performance test data follows:
Test: Running will-it-scale/fallocate2 on CPU-bound containers.
Observation: Average fallocate operations per container per second.
|CPU: Kunpeng 920 | P80 | P1 |
|Memory: 512GB |------------------------|-------------------------|
|960GB SSD (0.5GB/s)| base | patched | base | patched |
|-------------------|-------|----------------|--------|----------------|
|mb_optimize_scan=0 | 4821 | 9636 (+99.8%) | 314065 | 337597 (+7.4%) |
|mb_optimize_scan=1 | 4784 | 4834 (+1.04%) | 316344 | 341440 (+7.9%) |
|CPU: AMD 9654 * 2 | P96 | P1 |
|Memory: 1536GB |------------------------|-------------------------|
|960GB SSD (1GB/s) | base | patched | base | patched |
|-------------------|-------|----------------|--------|----------------|
|mb_optimize_scan=0 | 15371 | 22341 (+45.3%) | 205851 | 219707 (+6.7%) |
|mb_optimize_scan=1 | 6101 | 9177 (+50.4%) | 207373 | 215732 (+4.0%) |
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since stream allocation does not use ac->ac_f_ex.fe_start, it is set to -1
by default, so the no longer needed sbi->s_mb_last_start is removed.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ext4 allocates blocks, we used to just go through the block groups
one by one to find a good one. But when there are tons of block groups
(like hundreds of thousands or even millions) and not many have free space
(meaning they're mostly full), it takes a really long time to check them
all, and performance gets bad. So, we added the "mb_optimize_scan" mount
option (which is on by default now). It keeps track of some group lists,
so when we need a free block, we can just grab a likely group from the
right list. This saves time and makes block allocation much faster.
But when multiple processes or containers are doing similar things, like
constantly allocating 8k blocks, they all try to use the same block group
in the same list. Even just two processes doing this can cut the IOPS in
half. For example, one container might do 300,000 IOPS, but if you run two
at the same time, the total is only 150,000.
Since we can already look at block groups in a non-linear way, the first
and last groups in the same list are basically the same for finding a block
right now. Therefore, add an ext4_try_lock_group() helper function to skip
the current group when it is locked by another process, thereby avoiding
contention with other processes. This helps ext4 make better use of having
multiple block groups.
Also, to make sure we don't skip all the groups that have free space
when allocating blocks, we won't try to skip busy groups anymore when
ac_criteria is CR_ANY_FREE.
Performance test data follows:
Test: Running will-it-scale/fallocate2 on CPU-bound containers.
Observation: Average fallocate operations per container per second.
|CPU: Kunpeng 920 | P80 |
|Memory: 512GB |-------------------------|
|960GB SSD (0.5GB/s)| base | patched |
|-------------------|-------|-----------------|
|mb_optimize_scan=0 | 2667 | 4821 (+80.7%) |
|mb_optimize_scan=1 | 2643 | 4784 (+81.0%) |
|CPU: AMD 9654 * 2 | P96 |
|Memory: 1536GB |-------------------------|
|960GB SSD (1GB/s) | base | patched |
|-------------------|-------|-----------------|
|mb_optimize_scan=0 | 3450 | 15371 (+345%) |
|mb_optimize_scan=1 | 3209 | 6101 (+90.0%) |
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There was a lot of common code in the codepaths used to convert an
inline directory and to creaet a new directory. To address this,
rename ext4_init_dot_dotdot() to ext4_init_dirblock() and then move
common code into that function.
This reduces the lines of code count in fs/ext4/inline.c and
fs/ext4/namei.c, as well as reducing the size of their object files.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://patch.msgid.link/20250712181249.434530-3-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
