The MMIO_REMAP BO is a special 4K IO page that does not have a ttm_tt
behind it. However, amdgpu_ttm_tt_pde_flags() was treating it like
normal TT/doorbell/preempt memory and unconditionally accessed
ttm->caching. For the MMIO_REMAP BO, ttm is NULL, so this leads to a
NULL pointer dereference when computing PDE flags.
Fix this by checking that ttm is non-NULL before reading ttm->caching.
This prevents the crash for MMIO_REMAP and also makes the code more
defensive if other BOs ever come through without a ttm_tt.
Fixes: fb5a52dbe9 ("drm/amdgpu: Implement TTM handling for MMIO_REMAP placement")
Suggested-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Tested-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0db94da5a0)
This fixes sparse mappings (aka. partially resident textures).
Check the correct flags.
Since a recent refactor, the code works with uAPI flags (for
mapping buffer objects), and not PTE (page table entry) flags.
Fixes: 6716a823d1 ("drm/amdgpu: rework how PTE flags are generated v3")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8feeab26c8)
[Why]
Accoreding to CP updated to RS64 on gfx11,
WRITE_DATA with PREEMPTION_META_MEMORY(dst_sel=8) is illegal for CP FW.
That packet is used for MCBP on F32 based system.
So it would lead to incorrect GRBM write and FW is not handling that
extra case correctly.
[How]
With gfx11 rs64 enabled, skip emit de meta data.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8366cd442d)
Cc: stable@vger.kernel.org
During the suspend sequence VPE is already going to be power gated
as part of vpe_suspend(). It's unnecessary to call during calls to
amdgpu_device_set_pg_state().
It actually can expose a race condition with the firmware if s0i3
sequence starts as well. Drop these calls.
Cc: Peyton.Lee@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2a6c826cfe)
Cc: stable@vger.kernel.org
create_in_format_blob() is either supposed to return a valid
pointer or an error, but never NULL. The caller will dereference
the blob when it is not an error, and thus will oops if NULL
returned. Return proper error values in the failure cases.
Cc: stable@vger.kernel.org
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Fixes: 0d6dcd741c ("drm/plane: modify create_in_formats to acommodate async")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251112233030.24117-2-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Current gu2host handler registered as MSI-X vector 0 and as per bspec for
a msix vector 0 interrupt, the driver must check the legacy registers
190008(TILE_INT_REG), 190060h (GT INTR Identity Reg 0) and other registers
mentioned in "Interrupt Service Routine Pseudocode" otherwise it will block
the next interrupts. To overcome this issue replacing guc2host handler
with legacy xe_irq_handler.
Fixes: da889070be ("drm/xe/irq: Separate MSI and MSI-X flows")
Bspec: 62357
Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20251107083141.2080189-1-venkata.ramana.nayana@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit c34a14bce7)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There are 2 identical "select DRM_EXEC" lines for DRM_XE.
Remove one to clean up the configuration.
Fixes: d490ecf577 ("drm/xe: Rework xe_exec and the VM rebind worker to use the drm_exec helper")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251110232657.1807998-2-shuicheng.lin@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit b1aa02acd0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The MOCS kunit test calls KUNIT_ASSERT_TRUE_MSG() with a condition of
'true;' this prevents the assertion from ever failing. Replace
KUNIT_ASSERT_TRUE_MSG with KUNIT_FAIL_AND_ABORT to get the intended
failure behavior in cases where forcewake was not acquired successfully.
Fixes: 51c0ee84e4 ("drm/xe/tests/mocs: Hold XE_FORCEWAKE_ALL for LNCF regs")
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251113234038.2256106-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 9be4f0f687)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
If user provides a large value (such as 0x80) for parameter
prefetch_mem_region_instance in vm_bind ioctl, it will cause
BIT(prefetch_region) overflow as below:
"
------------[ cut here ]------------
UBSAN: shift-out-of-bounds in drivers/gpu/drm/xe/xe_vm.c:3414:7
shift exponent 128 is too large for 64-bit type 'long unsigned int'
CPU: 8 UID: 0 PID: 53120 Comm: xe_exec_system_ Tainted: G W 6.18.0-rc1-lgci-xe-kernel+ #200 PREEMPT(voluntary)
Tainted: [W]=WARN
Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
Call Trace:
<TASK>
dump_stack_lvl+0xa0/0xc0
dump_stack+0x10/0x20
ubsan_epilogue+0x9/0x40
__ubsan_handle_shift_out_of_bounds+0x10e/0x170
? mutex_unlock+0x12/0x20
xe_vm_bind_ioctl.cold+0x20/0x3c [xe]
...
"
Fix it by validating prefetch_region before the BIT() usage.
v2: Add Closes and Cc stable kernels. (Matt)
Reported-by: Koen Koning <koen.koning@intel.com>
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6478
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251112181005.2120521-2-shuicheng.lin@intel.com
(cherry picked from commit 8f565bdd14)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Delete the attempt to progress the queue when checking if fence is
signaled. This avoids deadlock.
dma-fence_ops::signaled can be called with the fence lock in unknown
state. For radeon, the fence lock is also the wait queue lock. This can
cause a self deadlock when signaled() tries to make forward progress on
the wait queue. But advancing the queue is unneeded because incorrectly
returning false from signaled() is perfectly acceptable.
Link: https://github.com/brave/brave-browser/issues/49182
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4641
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Robert McClinton <rbmccav@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 527ba26e50)
Cc: stable@vger.kernel.org
[Why]
Existing routine has two conversion sequence,
pbn_to_kbps and kbps_to_pbn with margin.
Non of those has without-margin calculation.
kbps_to_pbn with margin conversion includes
fec overhead which has already been included in
pbn_div calculation with 0.994 factor considered.
It is a double counted fec overhead factor that causes
potential bw loss.
[How]
Add without-margin calculation.
Fix fec overhead double counted issue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3735
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e0dec00f3d)
Cc: stable@vger.kernel.org
[Why]
On DCN20 & DCN30, the 6th DPP's & HUBP's are powered on permanently and
cannot be power gated. Thus, when dpp_reset() is invoked for the DPP5,
while it's still powered on, the cached cursor_state
(dpp_base->pos.cur0_ctl.bits.cur0_enable)
and the actual state (CUR0_ENABLE) bit are unsycned. This can cause a
double cursor in full screen with non-native scaling.
[How]
Force disable cursor on DPP5 on plane powerdown for ASICs w/ 6 DPPs/HUBPs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4673
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 79b3c037f9)
Cc: stable@vger.kernel.org
[Why]
Some monitors perform rapid “autoscan” HPD re‑assertions right after a
disconnect or powersaving mode enablement. These appear as a quick
disconnect→reconnect with an identical EDID. Since Linux has no HDMI
hotplug detection (HPD) filter, these quick reconnects are seen as hotplug
events, which can unintentionally wake a system with DPMS off.
An example: https://gitlab.freedesktop.org/drm/amd/-/issues/2876
Such 'fake reconnects' are considered when the interval between a
disconnect and a connect is within 1500ms (experimentally chosen using
several monitors), and the two connections have the same EDID.
[How]
Implement a time-based debounce mechanism:
1. On HDMI disconnect detection, instead of immediately processing the
HPD event, save the current sink and schedule delayed work (default 1500ms)
2. If another HDMI disconnect HPD event arrives during the debounce period,
it reschedules the pending work, ensuring only the final state is processed.
3. When the debounce timer expires, re-detect the display and compare the
new sink with the cached one using EDID comparison.
4. If sinks match (same EDID), this was a spontaneous HPD toggle:
- Update connector state internally
- Skip hotplug event to prevent desktop rearrangement
If sinks differ, this was a real display change:
- Process normally with the hotplug event
The debounce delay is configurable via module parameter
'hdmi_hpd_debounce_delay_ms'.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2876
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c918e75e1e)
[Why]
Empirical measurement of some monitors that fail to read EDID while
booting shows that the number of retries with a 30ms delay between
tries is as high as 16.
[How]
Increase number of retries to 20.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ad1c59ad7c)
Cc: stable@vger.kernel.org
[Why]
When a monitor is booting it's possible that it isn't ready to retrieve
link caps and this can lead to an EDID read failure:
```
[drm:retrieve_link_cap [amdgpu]] *ERROR* retrieve_link_cap: Read receiver caps dpcd data failed.
amdgpu 0000:c5:00.0: [drm] *ERROR* No EDID read.
```
[How]
Rather than msleep once and try a few times, msleep each time. Should
be no changes for existing working monitors, but should correct reading
caps on a monitor that is slow to boot.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 669dca37b3)
Cc: stable@vger.kernel.org
[why]
1. With allow_0_dtb_clk enabled, the time required to latch DTBCLK to 600 MHz
depends on the SMU. If DTBCLK is not latched to 600 MHz before set_mode completes,
gating DTBCLK causes the DP2 sink to lose its clock source.
2. The existing DTBCLK gating sequence ungates DTBCLK based on both pix_clk and ref_dtbclk,
but gates DTBCLK when either pix_clk or ref_dtbclk is zero.
pix_clk can be zero outside the set_mode sequence before DTBCLK is properly latched,
which can lead to DTBCLK being gated by mistake.
[how]
Consider both pixel_clk and ref_dtbclk when determining when it is safe to gate DTBCLK;
this is more accurate.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4701
Fixes: 5949e7c489 ("drm/amd/display: Enable Dynamic DTBCLK Switch")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d04eb0c402)
Cc: stable@vger.kernel.org
On PTL, no combo PHY is connected to PORT B. However, PORT B can
still be used for Type-C and will utilize the C20 PHY for eDP
over Type-C. In such configurations, VBTs also enumerate PORT B.
This leads to issues where PORT B is incorrectly identified as using the
C10 PHY, due to the assumption that returning true for PORT B in
intel_encoder_is_c10phy() would not cause problems.
From PTL's perspective, only PORT A/PHY A uses the C10 PHY.
Update the helper intel_encoder_is_c10phy() to return true only for
PORT A/PHY on PTL.
v2: Change the condition code style for ptl/wcl
Bspec: 72571,73944
Fixes: 9d10de78a3 ("drm/i915/wcl: C10 phy connected to port A and B")
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250922150317.2334680-4-dnyaneshwar.bhadane@intel.com
(cherry picked from commit 8147f7a1c0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We will need to differentiate between WCL and PTL in
intel_encoder_is_c10phy(). Since WCL and PTL use the same display
architecture, let's define WCL as a subplatform of PTL to allow the
differentiation.
v2: Update commit message and reorder wcl define (Gustavo)
Fixes: 3c0f211bc8 ("drm/xe: Add Wildcat Lake device IDs to PTL list")
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250922150317.2334680-3-dnyaneshwar.bhadane@intel.com
(cherry picked from commit 4dfaae643e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo added Fixes tag when porting it to fixes]
To form the WCL platform as a subplatform of PTL in definition,
WCL pci ids are splited into saparate group from PTL.
So update the pciidlist struct to cover all the pci ids.
v2:
- Squash wcl description in single patch for display and xe.(jani,gustavo)
Fixes: 3c0f211bc8 ("drm/xe: Add Wildcat Lake device IDs to PTL list")
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250922150317.2334680-2-dnyaneshwar.bhadane@intel.com
(cherry picked from commit 32620e1764)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo added the Fixes tag when porting it to fixes]
nvkm_falcon_fw::boot is allocated, but no one frees it. This causes a
kmemleak warning.
Make sure this data is deallocated.
Fixes: 2541626cfb ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251117084231.2910561-1-namcao@linutronix.de
Commit b6bcbce335 ("soc/tegra: pmc: Ensure power-domains are in a
known state") was introduced so that all power domains get initialized
to a known working state when booting and it does this by shutting them
down (including asserting resets and disabling clocks) before registering
each power domain with the genpd framework, leaving it to each driver to
later on power its needed domains.
This caused the Google Pixel C to hang when booting due to a workaround
in the DSI driver introduced in commit b22fd0b963 ("drm/tegra: dsi:
Clear enable register if powered by bootloader") meant to handle the case
where the bootloader enabled the DSI hardware module. The workaround relies
on reading a hardware register to determine the current status and after
b6bcbce335 that now happens in a powered down state thus leading to
the boot hang.
Fix this by reverting b22fd0b963 since currently we are guaranteed
that the hardware will be fully reset by the time we start enabling the
DSI module.
Fixes: b6bcbce335 ("soc/tegra: pmc: Ensure power-domains are in a known state")
Cc: stable@vger.kernel.org
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251103-diogo-smaug_ec_typec-v1-1-be656ccda391@tecnico.ulisboa.pt
Add a call to put_pid() corresponding to get_task_pid().
host1x_memory_context_alloc() does not take ownership of the PID so we
need to free it here to avoid leaking.
Signed-off-by: Prateek Agarwal <praagarwal@nvidia.com>
Fixes: e09db97889 ("drm/tegra: Support context isolation")
[mperttunen@nvidia.com: reword commit message]
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250919-host1x-put-pid-v1-1-19c2163dfa87@nvidia.com
driver_find_device() calls get_device() to increment the reference
count once a matching device is found, but there is no put_device() to
balance the reference count. To avoid reference count leakage, add
put_device() to decrease the reference count.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: a31500fe70 ("drm/tegra: dc: Restore coupling of display controllers")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251022114720.24937-1-make24@iscas.ac.cn
The MODULE_PARM_DESC string for the "active" parameter is missing a
space and has an extraneous trailing ']' character. Correct these.
Before patch:
$ modinfo -p ./drm_client_lib.ko
active:Choose which drm client to start, default isfbdev] (string)
After patch:
$ modinfo -p ./drm_client_lib.ko
active:Choose which drm client to start, default is fbdev (string)
Fixes: f7b42442c4 ("drm/log: Introduce a new boot logger to draw the kmsg on the screen")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251112010920.2355712-1-rdunlap@infradead.org
Disable Panel Replay on MST links until it's properly implemented. For
instance the required VSC SDP is not programmed on MST and FEC is not
enabled if Panel Replay is enabled.
Fixes: 3257e55d3e ("drm/i915/panelreplay: enable/disable panel replay")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15174
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251107124141.911895-1-imre.deak@intel.com
(cherry picked from commit e109f644b8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix the following corner case:-
Consider a 2M huge page SVM allocation, followed by prefetch call for
the first 4K page. The whole range is initially mapped with single PTE.
After the prefetch, this range gets split to first page + rest of the
pages. Currently, the first page mapping is not updated on MI300A (APU)
since page hasn't migrated. However, after range split PTE mapping it not
valid.
Fix this by forcing page table update for the whole range when prefetch
is called. Calling prefetch on APU doesn't improve performance. If all
it deteriotes. However, functionality has to be supported.
v2: Use apu_prefer_gtt as this issue doesn't apply to APUs with carveout
VRAM
v3: Simplify by setting the flag for all ASICs as it doesn't affect dGPU
v4: Remove v2 and v3 changes. Force update_mapping when range is split
at a size that is not aligned to prange granularity
Suggested-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 076470b9f6)
Over allocation of save area is not fatal, only under allocation is.
ROCm has various components that independently claim authority over save
area size.
Unless KFD decides to claim single authority, relax size checks.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 15bd4958fe)
Cc: stable@vger.kernel.org
enable parse_cs callback for JPEG5_0_1.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5479855799)
Cc: stable@vger.kernel.org
When the BO pointer provided to amdgpu_bo_create_kernel() points to
non-NULL, amdgpu_bo_create_kernel() takes it as a hint to pin that address
rather than allocate a new BO.
This functionality is never desired for allocating ISP buffers. A new BO
should always be created when isp_kernel_buffer_alloc() is called, per the
description for isp_kernel_buffer_alloc().
Ensure this by zeroing *bo right before the amdgpu_bo_create_kernel() call.
Fixes: 55d42f6169 ("drm/amd/amdgpu: Add helper functions for isp buffers")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 73c8c29baa)
[Why]
When changing resolution (e.g., 4K → FHD) in mirror/clone mode with
certain monitors, the monitor blanks and loses connection due to an early
exit in vrr_settings_require_update(). The function only checks if VRR
state, fixed refresh target, or min/max refresh rate range has changed.
During mode changes, if the calculated min/max refresh values remain the
same even though the stream's v_total changed, the function returns early
without updating vrr_params.adjust.v_total_min/max, leaving the monitor's
VRR timing parameters unsynced with the new mode, causing it to blank out.
[How]
Explicitly adjust VRR parameters to the stream's nominal v_total when VRR
is supported, but inactive.
Fixes: 6d31602a9f ("drm/amd/display: more liberal vmin/vmax update for freesync")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 607df8248a)
Fix a potential deadlock caused by inconsistent spinlock usage
between interrupt and process contexts in the userq fence driver.
The issue occurs when amdgpu_userq_fence_driver_process() is called
from both:
- Interrupt context: gfx_v11_0_eop_irq() -> amdgpu_userq_fence_driver_process()
- Process context: amdgpu_eviction_fence_suspend_worker() ->
amdgpu_userq_fence_driver_force_completion() -> amdgpu_userq_fence_driver_process()
In interrupt context, the spinlock was acquired without disabling
interrupts, leaving it in {IN-HARDIRQ-W} state. When the same lock
is acquired in process context, the kernel detects inconsistent
locking since the process context acquisition would enable interrupts
while holding a lock previously acquired in interrupt context.
Kernel log shows:
[ 4039.310790] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[ 4039.310804] kworker/7:2/409 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 4039.310818] ffff9284e1bed000 (&fence_drv->fence_list_lock){?...}-{3:3},
[ 4039.310993] {IN-HARDIRQ-W} state was registered at:
[ 4039.311004] lock_acquire+0xc6/0x300
[ 4039.311018] _raw_spin_lock+0x39/0x80
[ 4039.311031] amdgpu_userq_fence_driver_process.part.0+0x30/0x180 [amdgpu]
[ 4039.311146] amdgpu_userq_fence_driver_process+0x17/0x30 [amdgpu]
[ 4039.311257] gfx_v11_0_eop_irq+0x132/0x170 [amdgpu]
Fix by using spin_lock_irqsave()/spin_unlock_irqrestore() to properly
manage interrupt state regardless of calling context.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ded3ad780c)
Cc: stable@vger.kernel.org
drm_sched_entity_init wasn't called yet, so the only thing to
do is to release allocated memory.
This doesn't fix any bug since entity is zero allocated and
drm_sched_entity_fini does nothing in this case.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ec49374ccb)
Certain multi-GPU configurations (especially GFX12) may hit
data corruption when a DCC-compressed VRAM surface is shared across GPUs
using peer-to-peer (P2P) DMA transfers.
Such surfaces rely on device-local metadata and cannot be safely accessed
through a remote GPU’s page tables. Attempting to import a DCC-enabled
surface through P2P leads to incorrect rendering or GPU faults.
This change disables P2P for DCC-enabled VRAM buffers that are contiguous
and allocated on GFX12+ hardware. In these cases, the importer falls back
to the standard system-memory path, avoiding invalid access to compressed
surfaces.
Future work could consider optional migration (VRAM→System→VRAM) if a
performance regression is observed when `attach->peer2peer = false`.
Tested on:
- Dual RX 9700 XT (Navi4x) setup
- GNOME and Wayland compositor scenarios
- Confirmed no corruption after disabling P2P under these conditions
v2: Remove check TTM_PL_VRAM & TTM_PL_FLAG_CONTIGUOUS.
v3: simplify for upsteam and fix ip version check (Alex)
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9dff2bb709)
Cc: stable@vger.kernel.org
Apply WA_14024681466 to Xe3_LPG graphics IP versions from 30.00 to 30.05.
v2: (Matthew Roper)
- Remove stepping filter as workaround applies to all steppings.
- Add an engine class filter so it only applies to the RENDER engine.
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20251027092643.335904-1-nitin.r.gote@intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 071089a69e)
Cc: stable@vger.kernel.org # v6.16+
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
First, we can't assume pipe == crtc index. If a pipe is fused off in
between, it no longer holds. intel_crtc_for_pipe() is the only proper
way to get from a pipe to the corresponding crtc.
Second, drivers aren't supposed to access or index drm->vblank[]
directly. There's drm_crtc_vblank_crtc() for this.
Use both functions to fix the pipe to vblank conversion.
Fixes: f02658c46c ("drm/i915/psr: Add mechanism to notify PSR of pipe enable/disable")
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: stable@vger.kernel.org # v6.16+
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251106200000.1455164-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 2750f6765d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The shmem layer zeroes out the new pages using cached mappings, and if
we don't CPU-flush we might leave dirty cachelines behind, leading to
potential data leaks and/or asynchronous buffer corruption when dirty
cachelines are evicted.
Fixes: 8a1cc07578 ("drm/panthor: Add GEM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251107171214.1186299-1-boris.brezillon@collabora.com
- Strip trailing padding bytes from modules.builtin.modinfo to fix error
during modules_install with certain versions of kmod
- Drop unused static inline function warning in .c files with clang from
W=1 to W=2
- Ensure kernel-doc.py invocations use the PYTHON3 make variable to
ensure user's choice of Python interpreter is always respected
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaRABuwAKCRAdayaRccAa
lpyDAQCiCQkpyG1JU2uKOaDTItA7BzK6iuCuqoePk0um+rIUKwEAq8fYCJU7kDM2
N+uL8Gw03vryftPYMVcfdrO0WsCBwgM=
=D8C8
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Strip trailing padding bytes from modules.builtin.modinfo to fix
error during modules_install with certain versions of kmod
- Drop unused static inline function warning in .c files with clang
from W=1 to W=2
- Ensure kernel-doc.py invocations use the PYTHON3 make variable to
ensure user's choice of Python interpreter is always respected
* tag 'kbuild-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Let kernel-doc.py use PYTHON3 override
compiler_types: Move unused static inline functions warning to W=2
kbuild: Strip trailing padding bytes from modules.builtin.modinfo
It is possible to force a specific version of python to be used when
building the kernel by passing PYTHON3= on the make command line.
However kernel-doc.py is currently called with python3 hard-coded and
thus ignores this setting.
Use $(PYTHON3) to run $(KERNELDOC) so that the desired version of
python is used.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://patch.msgid.link/20251107192933.2bfe9e57@endymion
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
This reverts commit ebe7556050.
Tested the latest kernel on my GB203 and this seems to break it somehow.
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: GSP-FMC boot failed (mbox: 0x0000000b)
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: init failed, -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau: drm:00000000:00000080: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: drm: Device allocation failed: -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: probe with driver nouveau failed with error -5
Not sure why, I went over the patch and thought it should have worked, but there must be some
32-bit problem maybe in the FMC boot path.
Signed-off-by: Dave Airlie <airlied@redhat.com>
