[ Upstream commit 280d654324 ]
In case of subflow disconnect(), which can also happen with the first
subflow in case of errors like timeout or reset, mptcp_subflow_ctx_reset
will reset most fields from the mptcp_subflow_context structure,
including close_event_done. Then, when another subflow is closed, yet
another SUB_CLOSED event for the disconnected initial subflow is sent.
Because of the previous reset, there are no source address and
destination port.
A solution is then to also check the subflow's local id: it shouldn't be
negative anyway.
Another solution would be not to reset subflow->close_event_done at
disconnect time, but when reused. But then, probably the whole reset
could be done when being reused. Let's not change this logic, similar
to TCP with tcp_disconnect().
Fixes: d82809b6c5 ("mptcp: avoid duplicated SUB_CLOSED events")
Cc: stable@vger.kernel.org
Reported-by: Marco Angaroni <marco.angaroni@italtel.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/603
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-1-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dccf46179d upstream.
Some subflow socket errors need to be reported to the MPTCP socket: the
initial subflow connect (MP_CAPABLE), and the ones from the fallback
sockets. The others are not propagated.
The issue is that sock_error() was used to retrieve the error, which was
also resetting the sk_err field. Because of that, when notifying the
userspace about subflow close events later on from the MPTCP worker, the
ssk->sk_err field was always 0.
Now, the error (sk_err) is only reset when propagating it to the msk.
Fixes: 15cc104533 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-3-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71154bbe49 upstream.
Syzkaller reports a simult-connect race leading to inconsistent fallback
status:
WARNING: CPU: 3 PID: 33 at net/mptcp/subflow.c:1515 subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515
Modules linked in:
CPU: 3 UID: 0 PID: 33 Comm: ksoftirqd/3 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515
Code: 89 ee e8 78 61 3c f6 40 84 ed 75 21 e8 8e 66 3c f6 44 89 fe bf 07 00 00 00 e8 c1 61 3c f6 41 83 ff 07 74 09 e8 76 66 3c f6 90 <0f> 0b 90 e8 6d 66 3c f6 48 89 df e8 e5 ad ff ff 31 ff 89 c5 89 c6
RSP: 0018:ffffc900006cf338 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888031acd100 RCX: ffffffff8b7f2abf
RDX: ffff88801e6ea440 RSI: ffffffff8b7f2aca RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007
R10: 0000000000000004 R11: 0000000000002c10 R12: ffff88802ba69900
R13: 1ffff920000d9e67 R14: ffff888046f81800 R15: 0000000000000004
FS: 0000000000000000(0000) GS:ffff8880d69bc000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000560fc0ca1670 CR3: 0000000032c3a000 CR4: 0000000000352ef0
Call Trace:
<TASK>
tcp_data_queue+0x13b0/0x4f90 net/ipv4/tcp_input.c:5197
tcp_rcv_state_process+0xfdf/0x4ec0 net/ipv4/tcp_input.c:6922
tcp_v6_do_rcv+0x492/0x1740 net/ipv6/tcp_ipv6.c:1672
tcp_v6_rcv+0x2976/0x41e0 net/ipv6/tcp_ipv6.c:1918
ip6_protocol_deliver_rcu+0x188/0x1520 net/ipv6/ip6_input.c:438
ip6_input_finish+0x1e4/0x4b0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ip6_input+0x105/0x2f0 net/ipv6/ip6_input.c:500
dst_input include/net/dst.h:471 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
NF_HOOK include/linux/netfilter.h:318 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x264/0x650 net/ipv6/ip6_input.c:311
__netif_receive_skb_one_core+0x12d/0x1e0 net/core/dev.c:5979
__netif_receive_skb+0x1d/0x160 net/core/dev.c:6092
process_backlog+0x442/0x15e0 net/core/dev.c:6444
__napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7494
napi_poll net/core/dev.c:7557 [inline]
net_rx_action+0xa9f/0xfe0 net/core/dev.c:7684
handle_softirqs+0x216/0x8e0 kernel/softirq.c:579
run_ksoftirqd kernel/softirq.c:968 [inline]
run_ksoftirqd+0x3a/0x60 kernel/softirq.c:960
smpboot_thread_fn+0x3f7/0xae0 kernel/smpboot.c:160
kthread+0x3c2/0x780 kernel/kthread.c:463
ret_from_fork+0x5d7/0x6f0 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
The TCP subflow can process the simult-connect syn-ack packet after
transitioning to TCP_FIN1 state, bypassing the MPTCP fallback check,
as the sk_state_change() callback is not invoked for * -> FIN_WAIT1
transitions.
That will move the msk socket to an inconsistent status and the next
incoming data will hit the reported splat.
Close the race moving the simult-fallback check at the earliest possible
stage - that is at syn-ack generation time.
About the fixes tags: [2] was supposed to also fix this issue introduced
by [3]. [1] is required as a dependence: it was not explicitly marked as
a fix, but it is one and it has already been backported before [3]. In
other words, this commit should be backported up to [3], including [2]
and [1] if that's not already there.
Fixes: 23e89e8ee7 ("tcp: Don't drop SYN+ACK for simultaneous connect().") [1]
Fixes: 4fd19a3070 ("mptcp: fix inconsistent state on fastopen race") [2]
Fixes: 1e777f39b4 ("mptcp: add MSG_FASTOPEN sendmsg flag support") [3]
Cc: stable@vger.kernel.org
Reported-by: syzbot+0ff6b771b4f7a5bce83b@syzkaller.appspotmail.com
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/586
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251212-net-mptcp-subflow_data_ready-warn-v1-1-d1f9fd1c36c8@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ea6190f42 upstream.
The MPTCP protocol usually schedule the retransmission timer only
when there is some chances for such retransmissions to happen.
With a notable exception: __mptcp_push_pending() currently schedule
such timer unconditionally, potentially leading to unnecessary rtx
timer expiration.
The issue is present since the blamed commit below but become easily
reproducible after commit 27b0e701d3 ("mptcp: drop bogus optimization
in __mptcp_check_push()")
Fixes: 33d41c9cd7 ("mptcp: more accurate timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-3-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ace3297a7 upstream.
Before this patch, the kernel was saving any flags set by the userspace,
even unknown ones. This doesn't cause critical issues because the kernel
is only looking at specific ones. But on the other hand, endpoints dumps
could tell the userspace some recent flags seem to be supported on older
kernel versions.
Instead, ignore all unknown flags when parsing them. By doing that, the
userspace can continue to set unsupported flags, but it has a way to
verify what is supported by the kernel.
Note that it sounds better to continue accepting unsupported flags not
to change the behaviour, but also that eases things on the userspace
side by adding "optional" endpoint types only supported by newer kernel
versions without having to deal with the different kernel versions.
A note for the backports: there will be conflicts in mptcp.h on older
versions not having the mentioned flags, the new line should still be
added last, and the '5' needs to be adapted to have the same value as
the last entry.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-1-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When __mptcp_retrans() kicks-in, it schedules one or more subflows for
retransmission, but such subflows could be actually left alone if there
is no more data to retransmit and/or in case of concurrent fallback.
Scheduled subflows could be processed much later in time, i.e. when new
data will be transmitted, leading to bad subflow selection.
Explicitly clear all scheduled subflows before leaving the
retransmission function.
Fixes: ee2708aeda ("mptcp: use get_retrans wrapper")
Cc: stable@vger.kernel.org
Reported-by: Filip Pokryvka <fpokryvk@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251125-net-mptcp-clear-sched-rtx-v1-1-1cea4ad2165f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=89Xl
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPsec and wireless.
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures"
* tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
vsock: Ignore signal/timeout on connect() if already established
be2net: pass wrb_params in case of OS2BMC
l2tp: reset skb control buffer on xmit
net: dsa: microchip: lan937x: Fix RGMII delay tuning
selftests: mptcp: add a check for 'add_addr_accepted'
mptcp: fix address removal logic in mptcp_pm_nl_rm_addr
selftests: mptcp: join: userspace: longer timeout
selftests: mptcp: join: endpoints: longer timeout
selftests: mptcp: join: fastclose: remove flaky marks
mptcp: fix duplicate reset on fastclose
mptcp: decouple mptcp fastclose from tcp close
mptcp: do not fallback when OoO is present
mptcp: fix premature close in case of fallback
mptcp: avoid unneeded subflow-level drops
mptcp: fix ack generation for fallback msk
wifi: rtw89: hw_scan: Don't let the operating channel be last
net: phylink: add missing supported link modes for the fixed-link
selftest: af_unix: Add test for SO_PEEK_OFF.
af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().
net/mlx5: Clean up only new IRQ glue on request_irq() failure
...
Fix inverted WARN_ON_ONCE condition that prevented normal address
removal counter updates. The current code only executes decrement
logic when the counter is already 0 (abnormal state), while
normal removals (counter > 0) are ignored.
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Fixes: 6361139185 ("mptcp: pm: remove '_nl' from mptcp_pm_nl_rm_addr_received")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-10-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CI reports sporadic failures of the fastclose self-tests. The root
cause is a duplicate reset, not carrying the relevant MPTCP option.
In the failing scenario the bad reset is received by the peer before
the fastclose one, preventing the reception of the latter.
Indeed there is window of opportunity at fastclose time for the
following race:
mptcp_do_fastclose
__mptcp_close_ssk
__tcp_close()
tcp_set_state() [1]
tcp_send_active_reset() [2]
After [1] the stack will send reset to in-flight data reaching the now
closed port. Such reset may race with [2].
Address the issue explicitly sending a single reset on fastclose before
explicitly moving the subflow to close status.
Fixes: d21f834855 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/596
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-6-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the current fastclose implementation, the mptcp_do_fastclose()
helper is in charge of two distinct actions: send the fastclose reset
and cleanup the subflows.
Formally decouple the two steps, ensuring that mptcp explicitly closes
all the subflows after the mentioned helper.
This will make the upcoming fix simpler, and allows dropping the 2nd
argument from mptcp_destroy_common(). The Fixes tag is then the same as
in the next commit to help with the backports.
Fixes: d21f834855 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-5-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of DSS corruption, the MPTCP protocol tries to avoid the subflow
reset if fallback is possible. Such corruptions happen in the receive
path; to ensure fallback is possible the stack additionally needs to
check for OoO data, otherwise the fallback will break the data stream.
Fixes: e32d262c89 ("mptcp: handle consistently DSS corruption")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/598
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-4-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I'm observing very frequent self-tests failures in case of fallback when
running on a CONFIG_PREEMPT kernel.
The root cause is that subflow_sched_work_if_closed() closes any subflow
as soon as it is half-closed and has no incoming data pending.
That works well for regular subflows - MPTCP needs bi-directional
connectivity to operate on a given subflow - but for fallback socket is
race prone.
When TCP peer closes the connection before the MPTCP one,
subflow_sched_work_if_closed() will schedule the MPTCP worker to
gracefully close the subflow, and shortly after will do another schedule
to inject and process a dummy incoming DATA_FIN.
On CONFIG_PREEMPT kernel, the MPTCP worker can kick-in and close the
fallback subflow before subflow_sched_work_if_closed() is able to create
the dummy DATA_FIN, unexpectedly interrupting the transfer.
Address the issue explicitly avoiding closing fallback subflows on when
the peer is only half-closed.
Note that, when the subflow is able to create the DATA_FIN before the
worker invocation, the worker will change the msk state before trying to
close the subflow and will skip the latter operation as the msk will not
match anymore the precondition in __mptcp_close_subflow().
Fixes: f09b0ad55a ("mptcp: close subflow when receiving TCP+FIN")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-3-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rcv window is shared among all the subflows. Currently, MPTCP sync
the TCP-level rcv window with the MPTCP one at tcp_transmit_skb() time.
The above means that incoming data may sporadically observe outdated
TCP-level rcv window and being wrongly dropped by TCP.
Address the issue checking for the edge condition before queuing the
data at TCP level, and eventually syncing the rcv window as needed.
Note that the issue is actually present from the very first MPTCP
implementation, but backports older than the blamed commit below will
range from impossible to useless.
Before:
$ nstat -n; sleep 1; nstat -z TcpExtBeyondWindow
TcpExtBeyondWindow 14 0.0
After:
$ nstat -n; sleep 1; nstat -z TcpExtBeyondWindow
TcpExtBeyondWindow 0 0.0
Fixes: fa3fe2b150 ("mptcp: track window announced to peer")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-2-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_cleanup_rbuf() needs to know the last most recent, mptcp-level
rcv_wnd sent, and such information is tracked into the msk->old_wspace
field, updated at ack transmission time by mptcp_write_options().
Fallback socket do not add any mptcp options, such helper is never
invoked, and msk->old_wspace value remain stale. That in turn makes
ack generation at recvmsg() time quite random.
Address the issue ensuring mptcp_write_options() is invoked even for
fallback sockets, and just update the needed info in such a case.
The issue went unnoticed for a long time, as mptcp currently overshots
the fallback socket receive buffer autotune significantly. It is going
to change in the near future.
Fixes: e3859603ba ("mptcp: better msk receive window updates")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/594
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-1-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported use-after-free in mptcp_schedule_work() [1]
Issue here is that mptcp_schedule_work() schedules a work,
then gets a refcount on sk->sk_refcnt if the work was scheduled.
This refcount will be released by mptcp_worker().
[A] if (schedule_work(...)) {
[B] sock_hold(sk);
return true;
}
Problem is that mptcp_worker() can run immediately and complete before [B]
We need instead :
sock_hold(sk);
if (schedule_work(...))
return true;
sock_put(sk);
[1]
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 29 at lib/refcount.c:25 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:25
Call Trace:
<TASK>
__refcount_add include/linux/refcount.h:-1 [inline]
__refcount_inc include/linux/refcount.h:366 [inline]
refcount_inc include/linux/refcount.h:383 [inline]
sock_hold include/net/sock.h:816 [inline]
mptcp_schedule_work+0x164/0x1a0 net/mptcp/protocol.c:943
mptcp_tout_timer+0x21/0xa0 net/mptcp/protocol.c:2316
call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747
expire_timers kernel/time/timer.c:1798 [inline]
__run_timers kernel/time/timer.c:2372 [inline]
__run_timer_base+0x648/0x970 kernel/time/timer.c:2384
run_timer_base kernel/time/timer.c:2393 [inline]
run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403
handle_softirqs+0x22f/0x710 kernel/softirq.c:622
__do_softirq kernel/softirq.c:656 [inline]
run_ktimerd+0xcf/0x190 kernel/softirq.c:1138
smpboot_thread_fn+0x542/0xa60 kernel/smpboot.c:160
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
Cc: stable@vger.kernel.org
Fixes: 3b1d6210a9 ("mptcp: implement and use MPTCP-level retransmission")
Reported-by: syzbot+355158e7e301548a1424@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6915b46f.050a0220.3565dc.0028.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251113103924.3737425-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sockmap feature allows bpf syscall from userspace, or based
on bpf sockops, replacing the sk_prot of sockets during protocol stack
processing with sockmap's custom read/write interfaces.
'''
tcp_rcv_state_process()
syn_recv_sock()/subflow_syn_recv_sock()
tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB)
bpf_skops_established <== sockops
bpf_sock_map_update(sk) <== call bpf helper
tcp_bpf_update_proto() <== update sk_prot
'''
When the server has MPTCP enabled but the client sends a TCP SYN
without MPTCP, subflow_syn_recv_sock() performs a fallback on the
subflow, replacing the subflow sk's sk_prot with the native sk_prot.
'''
subflow_syn_recv_sock()
subflow_ulp_fallback()
subflow_drop_ctx()
mptcp_subflow_ops_undo_override()
'''
Then, this subflow can be normally used by sockmap, which replaces the
native sk_prot with sockmap's custom sk_prot. The issue occurs when the
user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops().
Here, it uses sk->sk_prot to compare with the native sk_prot, but this
is incorrect when sockmap is used, as we may incorrectly set
sk->sk_socket->ops.
This fix uses the more generic sk_family for the comparison instead.
Additionally, this also prevents a WARNING from occurring:
result from ./scripts/decode_stacktrace.sh:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \
(net/mptcp/protocol.c:4005)
Modules linked in:
...
PKRU: 55555554
Call Trace:
<TASK>
do_accept (net/socket.c:1989)
__sys_accept4 (net/socket.c:2028 net/socket.c:2057)
__x64_sys_accept (net/socket.c:2067)
x64_sys_call (arch/x86/entry/syscall_64.c:41)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f87ac92b83d
---[ end trace 0000000000000000 ]---
Fixes: 0b4f33def7 ("mptcp: fix tcp fallback crash")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20251111060307.194196-3-jiayuan.chen@linux.dev
The sockmap feature allows bpf syscall from userspace, or based on bpf
sockops, replacing the sk_prot of sockets during protocol stack processing
with sockmap's custom read/write interfaces.
'''
tcp_rcv_state_process()
subflow_syn_recv_sock()
tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB)
bpf_skops_established <== sockops
bpf_sock_map_update(sk) <== call bpf helper
tcp_bpf_update_proto() <== update sk_prot
'''
Consider two scenarios:
1. When the server has MPTCP enabled and the client also requests MPTCP,
the sk passed to the BPF program is a subflow sk. Since subflows only
handle partial data, replacing their sk_prot is meaningless and will
cause traffic disruption.
2. When the server has MPTCP enabled but the client sends a TCP SYN
without MPTCP, subflow_syn_recv_sock() performs a fallback on the
subflow, replacing the subflow sk's sk_prot with the native sk_prot.
'''
subflow_ulp_fallback()
subflow_drop_ctx()
mptcp_subflow_ops_undo_override()
'''
Subsequently, accept::mptcp_stream_accept::mptcp_fallback_tcp_ops()
converts the subflow to plain TCP.
For the first case, we should prevent it from being combined with sockmap
by setting sk_prot->psock_update_sk_prot to NULL, which will be blocked by
sockmap's own flow.
For the second case, since subflow_syn_recv_sock() has already restored
sk_prot to native tcp_prot/tcpv6_prot, no further action is needed.
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20251111060307.194196-2-jiayuan.chen@linux.dev
Explicitly account for MPTCP-level zero windows probe, to catch
hopefully earlier issues alike the one addressed by the previous
patch.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251028-net-mptcp-send-timeout-v1-4-38ffff5a9ec8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 72377ab2d6 ("mptcp: more conservative check for zero
probes") the MPTCP-level zero window probe check is always disabled, as
the TCP-level write queue always contains at least the newly allocated
skb.
Refine the relevant check tacking in account that the above condition
and that such skb can have zero length.
Fixes: 72377ab2d6 ("mptcp: more conservative check for zero probes")
Cc: stable@vger.kernel.org
Reported-by: Geliang Tang <geliang@kernel.org>
Closes: https://lore.kernel.org/d0a814c364e744ca6b836ccd5b6e9146882e8d42.camel@kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251028-net-mptcp-send-timeout-v1-3-38ffff5a9ec8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a MSG_PEEK | MSG_WAITALL read operation consumes all the bytes in the
receive queue and recvmsg() need to waits for more data - i.e. it's a
blocking one - upon arrival of the next packet the MPTCP protocol will
start again copying the oldest data present in the receive queue,
corrupting the data stream.
Address the issue explicitly tracking the peeked sequence number,
restarting from the last peeked byte.
Fixes: ca4fb89257 ("mptcp: add MSG_PEEK support")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251028-net-mptcp-send-timeout-v1-2-38ffff5a9ec8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Accessing the transmit queue without owning the msk socket lock is
inherently racy, hence __mptcp_check_push() could actually quit early
even when there is pending data.
That in turn could cause unexpected tx lock and timeout.
Dropping the early check avoids the race, implicitly relaying on later
tests under the relevant lock. With such change, all the other
mptcp_send_head() call sites are now under the msk socket lock and we
can additionally drop the now unneeded annotation on the transmit head
pointer accesses.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251028-net-mptcp-send-timeout-v1-1-38ffff5a9ec8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch has no functional change, and prepares the following one.
tcp_rcvbuf_grow() will need to have access to tp->rcvq_space.space
old and new values.
Change mptcp_rcvbuf_grow() in a similar way.
Signed-off-by: Eric Dumazet <edumazet@google.com>
[ Moved 'oldval' declaration to the next patch to avoid warnings at
build time. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20251028-net-tcp-recv-autotune-v3-3-74b43ba4c84c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mptcp PM can add subflow to the conn_list before tcp_init_transfer().
Calling tcp_rcvbuf_grow() on such subflow is not correct as later
init will overwrite the update.
Fix the issue calling tcp_rcvbuf_grow() only after init buffer
initialization.
Fixes: e118cdc34d ("mptcp: rcvbuf auto-tuning improvement")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251028-net-tcp-recv-autotune-v3-1-74b43ba4c84c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The special C-flag case expects the ADD_ADDR to be received when
switching to 'fully-established'. But for various reasons, the ADD_ADDR
could be sent after the "4th ACK", and the special case doesn't work.
On NIPA, the new test validating this special case for the C-flag failed
a few times, e.g.
102 default limits, server deny join id 0
syn rx [FAIL] got 0 JOIN[s] syn rx expected 2
Server ns stats
(...)
MPTcpExtAddAddrTx 1
MPTcpExtEchoAdd 1
Client ns stats
(...)
MPTcpExtAddAddr 1
MPTcpExtEchoAddTx 1
synack rx [FAIL] got 0 JOIN[s] synack rx expected 2
ack rx [FAIL] got 0 JOIN[s] ack rx expected 2
join Rx [FAIL] see above
syn tx [FAIL] got 0 JOIN[s] syn tx expected 2
join Tx [FAIL] see above
I had a suspicion about what the issue could be: the ADD_ADDR might have
been received after the switch to the 'fully-established' state. The
issue was not easy to reproduce. The packet capture shown that the
ADD_ADDR can indeed be sent with a delay, and the client would not try
to establish subflows to it as expected.
A simple fix is not to mark the endpoints as 'used' in the C-flag case,
when looking at creating subflows to the remote initial IP address and
port. In this case, there is no need to try.
Note: newly added fullmesh endpoints will still continue to be used as
expected, thanks to the conditions behind mptcp_pm_add_addr_c_flag_case.
Fixes: 4b1ff850e0 ("mptcp: pm: in-kernel: usable client side with C-flag")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-1-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Such function is called only by __mptcp_data_ready(), which in turn
is always invoked when msk is not owned by the user: we can drop the
redundant, related check.
Additionally mptcp needs to propagate the socket error only for
current subflow.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-7-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The upcoming patch will introduced backlog processing for MPTCP
socket, and we want to leverage coalescing in such data path.
Factor out the relevant bits not touching memory accounting to
deal with such use-case.
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-6-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit b7535cfed2 ("mptcp: drop legacy code around RX EOF"),
sk_shutdown can't change during the main recvmsg loop, we can drop
the related race breaker.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-5-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out all the skb initialization step in a new helper and
use it. Note that this change moves the MPTCP CB initialization
earlier: we can do such step as soon as the skb leaves the
subflow socket receive queues.
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-4-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Apply to the MPTCP auto-tuning the same improvements introduced for the
TCP protocol by the merge commit 2da35e4b4d ("Merge branch
'tcp-receive-side-improvements'").
The main difference is that TCP subflow and the main MPTCP socket need
to account separately for OoO: MPTCP does not care for TCP-level OoO
and vice versa, as a consequence do not reflect MPTCP-level rcvbuf
increase due to OoO packets at the subflow level.
This refeactor additionally allow dropping the msk receive buffer update
at receive time, as the latter only intended to cope with subflow receive
buffer increase due to OoO packets.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/487
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/559
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-3-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Usage of the skb deferral API is straight-forward; with multiple
subflows actives this allow moving part of the received application
load into multiple CPUs.
Also fix a typo in the related comment.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-1-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, upon the reception of an ADD_ADDR (and when the fullmesh flag
is not used), the in-kernel PM will create new subflows using the local
address the routing configuration will pick.
It would be easier to pick local addresses from a selected list of
endpoints, and use it only once, than relying on routing rules.
Use case: both the client (C) and the server (S) have two addresses (a
and b). The client establishes the connection between C(a) and S(a).
Once established, the server announces its additional address S(b). Once
received, the client connects to it using its second address C(b).
Compared to a situation without the 'laminar' endpoint for C(b), the
client didn't use this address C(b) to establish a subflow to the
server's primary address S(a). So at the end, we have:
C S
C(a) --- S(a)
C(b) --- S(b)
In case of a 3rd address on each side (C(c) and S(c)), upon the
reception of an ADD_ADDR with S(c), the client should not pick C(b)
because it has already been used. C(c) should then be used.
Note that this situation is currently possible if C doesn't add any
endpoint, but configure the routing in order to pick C(b) for the route
to S(b), and pick C(c) for the route to S(c). That doesn't sound very
practical because it means knowing in advance the IP addresses that
will be used and announced by the server.
'laminar', like the idea of laminar flows: the different subflows don't
mix with each other on an endpoint, unlike the "turbulent" way traffic
is mixed by 'fullmesh'.
In the code, the new endpoint type is added. Similar to the other
subflow types, an MPTCP_INFO counter is added. While at it, hole are now
commented in struct mptcp_info, to remember next time that these holes
can no longer be used.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/503
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-15-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When receiving an ADD_ADDR right after the 3WHS, the connection will
switch to 'fully established'. It means the MPTCP worker will be called
to treat two events, in this order: ADD_ADDR_RECEIVED, PM_ESTABLISHED.
The MPTCP endpoints cannot have the ID 0, because it is reserved to the
address and port used by the initial subflow. To be able to deal with
this case in different places, msk->mpc_endpoint_id contains the
endpoint ID linked to the initial subflow. This variable was only set
when treating the first PM_ESTABLISHED event, after ADD_ADDR_RECEIVED.
That's why in fill_local_addresses_vec(), the endpoint addresses were
compared with the one of the initial subflow, instead of only comparing
the IDs.
Instead, msk->mpc_endpoint_id is now set when treating ADD_ADDR_RECEIVED
as well, if needed, then the IDs can be compared.
To be able to do so, the code doing that is now in a dedicated helper,
and called from the functions linked to the two actions.
While at it, mptcp_endp_get_local_id() has also been moved up, next to
this new helper, because they are linked, and to be able to use it in
fill_local_addresses_vec() in the next commit.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-14-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the 'unsigned int' variables from the 'pm_nl_pernet' structure are
bounded to MPTCP_PM_ADDR_MAX, currently set to 8. The endpoint ID is
also bounded by the protocol to 8-bit. MPTCP_PM_ADDR_MAX, if extended
later, will never over 8-bit.
So no need to use 'unsigned int' variables, 'u8' is enough.
Note that the exposed counters in MPTCP_INFO are already limited to
8-bit, same for pm->extra_subflows, and others. So it seems even better
to limit them to 8-bit.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-13-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is currently not used.
It was in fact never used since its introduction in commit ff5a0b421c
("mptcp: faster active backup recovery"). It was probably initially
added to struct pm_nl_pernet during the development of this commit,
before being added to struct mptcp_pernet in ctrl.c, but not removed
from the first place.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-12-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'addrs', which in fact represents the number of declared
endpoints, and not only the 'signal' endpoints.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-11-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'local_addr_list', which in fact represents the list of
endpoints, and not only the 'subflow' endpoints.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-10-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'local_addr_max', which in fact represents the maximum
number of 'subflow' endpoints that can be used to create new subflows,
and not the number of local addresses that have been used to create
subflows.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_endp_subflow_max. Not to break the current uAPI, the
new name is added as a 'define' pointing to the former name. This will
then also help userspace devs.
Also move the variable and function next to the other 'endp_X_max' ones.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-9-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'add_addr_accept_max', which in fact represents the limit
of ADD_ADDR that can be accepted: the limit set via 'ip mptcp limit
add_addr_accepted X' for example. It is not linked to the maximum number
of accepted ADD_ADDR.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_limit_add_addr_accepted. Not to break the current
uAPI, the new name is added as a 'define' pointing to the former name.
This will then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-8-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'add_addr_signal_max', which in fact represents the
maximum number of 'signal' endpoints that can be used to announced
addresses, and not the number of ADD_ADDR that can be signalled.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_endp_signal_max. Not to break the current uAPI, the
new name is added as a 'define' pointing to the former name. This will
then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-7-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'subflows_max', which in fact represents the limit of
extra subflows: the limit set via 'ip mptcp limit subflows X' for
example. It is not linked to the maximum number of created / possible
subflows.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_limit_extra_subflows. Not to break the current uAPI,
the new name is added as a 'define' pointing to the former name. This
will then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-6-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the Path-Managers are confusing, and it would
help current and future developers, to clarify them.
One of them is 'subflows', which in fact represents the number of extra
subflows: all the additional subflows created after the initial one, and
not the total number of subflows.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_extra_subflows. Not to break the current uAPI, the
new name is added as a 'define' pointing to the former name. This will
then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-5-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this modification, this function was quite long with many levels
of indentations.
Each case can be split in a dedicated function: fullmesh, non-fullmesh.
To remove one level of indentation, msk->pm.subflows >= subflows_max is
now checked after having added one subflow, and stops the loop if it is
no longer possible to add new subflows. This is fine to do this because
this function should only be called if msk->pm.subflows < subflows_max.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-4-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this modification, this function was quite long with many levels
of indentations.
Each case can be split in a dedicated function: fullmesh, C flag, any.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-3-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When servers set the C-flag in their MP_CAPABLE to tell clients not to
create subflows to the initial address and port, clients will likely not
use their other endpoints. That's because the in-kernel path-manager
uses the 'subflow' endpoints to create subflows only to the initial
address and port.
If the limits have not been modified to accept ADD_ADDR, the client
doesn't try to establish new subflows. If the limits accept ADD_ADDR,
the routing routes will be used to select the source IP.
The C-flag is typically set when the server is operating behind a legacy
Layer 4 load balancer, or using anycast IP address. Clients having their
different 'subflow' endpoints setup, don't end up creating multiple
subflows as expected, and causing some deployment issues.
A special case is then added here: when servers set the C-flag in the
MPC and directly sends an ADD_ADDR, this single ADD_ADDR is accepted.
The 'subflows' endpoints will then be used with this new remote IP and
port. This exception is only allowed when the ADD_ADDR is sent
immediately after the 3WHS, and makes the client switching to the 'fully
established' mode. After that, 'select_local_address()' will not be able
to find any subflows, because 'id_avail_bitmap' will be filled in
mptcp_pm_create_subflow_or_signal_addr(), when switching to 'fully
established' mode.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/536
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-1-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
