[ Upstream commit 56f7db581e ]
During a warm reset flow, the cl->device pointer may be NULL if the
reset occurs while clients are still being enumerated. Accessing
cl->device->reference_count without a NULL check leads to a kernel panic.
This issue was identified during multi-unit warm reboot stress clycles.
Add a defensive NULL check for cl->device to ensure stability under
such intensive testing conditions.
KASAN: null-ptr-deref in range [0000000000000000-0000000000000007]
Workqueue: ish_fw_update_wq fw_reset_work_fn
Call Trace:
ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp]
ishtp_reset_handler+0x85/0x1a0 [intel_ishtp]
fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc]
Fixes: 3703f53b99 ("HID: intel_ish-hid: ISH Transport layer")
Signed-off-by: Ryan Lin <ryan.lin@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6807641ac ]
The ps_gamepad_create() function calls input_ff_create_memless()
without verifying its return value, which can lead to incorrect
behavior or potential crashes when FF effects are triggered.
Add a check for the return value of input_ff_create_memless().
Fixes: 51151098d7 ("HID: playstation: add DualSense classic rumble support.")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7f6629bff ]
I've acquired a Logitech MX Anywhere 3S mouse, which supports HID++ over
Bluetooth. Adding its PID 0xb037 to the allowlist enables the additional
features, such as high-resolution scrolling. Tested working across multiple
machines, with a mix of Intel and Mediatek Bluetooth chips.
[jkosina@suse.com: standardize shortlog]
Signed-off-by: Dennis Marttinen <twelho@welho.tech>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85a8668093 ]
The USB speaker has a bug that causes it to reboot when changing the
brightness using the physical knob.
Add a new vendor and product ID entry in hid-ids.h, and register
the corresponding device in hid-quirks.c with the required quirk.
Signed-off-by: Rodrigo Lugathe da Conceição Alves <lugathe2@gmail.com>
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2497ff38c5 ]
`i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data
into `ihid->rawbuf`.
The former can come from the userspace in the hidraw driver and is only
bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set
`max_buffer_size` field of `struct hid_ll_driver` which we do not).
The latter has size determined at runtime by the maximum size of
different report types you could receive on any particular device and
can be a much smaller value.
Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`.
The impact is low since access to hidraw devices requires root.
Signed-off-by: Kwok Kin Ming <kenkinming2002@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c06bc35575 ]
Another Chicony Electronics HP 5MP Camera with USB ID 04F2:B882
reports a HID sensor interface that is not actually implemented.
Add the device to the HID ignore list so the bogus sensor is never
exposed to userspace. Then the system won't hang when runtime PM
tries to wake the unresponsive device.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9143268d2 ]
When a new PlayStation gamepad (DualShock 4 or DualSense) is initialized,
the input subsystem sets the default value for its absolute axes (e.g.,
ABS_X, ABS_Y) to 0.
However, the hardware's actual neutral/resting state for these joysticks
is 128 (0x80). This creates a mismatch.
When the first HID report arrives from the device, the driver sees the
resting value of 128. The kernel compares this to its initial state of 0
and incorrectly interprets this as a delta (0 -> 128). Consequently, it
generates EV_ABS events for this initial, non-existent movement.
This behavior can fail userspace 'sanity check' tests (e.g., in
Android CTS) that correctly assert no motion events should be generated
from a device that is already at rest.
This patch fixes the issue by explicitly setting the initial value of the
main joystick axes (e.g., ABS_X, ABS_Y, ABS_RX, ABS_RY) to 128 (0x80)
in the common ps_gamepad_create() function.
This aligns the kernel's initial state with the hardware's expected
neutral state, ensuring that the first report (at 128) produces no
delta and thus, no spurious event.
Signed-off-by: Siarhei Vishniakou <svv@google.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56e230723e ]
Some systems have enabled ISH without any sensors. In this case sending
HOSTIF_DM_ENUM_DEVICES results in 0 sensors. This triggers ISH hardware
reset on subsequent enumeration after S3/S4 resume.
The enum_devices_done flag was not reset before sending the
HOSTIF_DM_ENUM_DEVICES command. On subsequent enumeration calls (such as
after S3/S4 resume), this flag retains its previous true value, causing the
wait loop to be skipped and returning prematurely to hid_ishtp_cl_init().
If 0 HID devices are found, hid_ishtp_cl_init() skips getting HID device
descriptors and sets init_done to true. When the delayed enumeration
response arrives with init_done already true, the driver treats it as a bad
packet and triggers an ISH hardware reset.
Set enum_devices_done to false before sending the enumeration command,
consistent with similar functions like ishtp_get_hid_descriptor() and
ishtp_get_report_descriptor() which reset their respective flags.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daeed86b68 ]
The ishtp_cl_bus_match() function previously only checked the first entry
in the driver's device ID table. Update it to iterate over the entire
table, allowing proper matching for drivers with multiple supported
protocol GUIDs.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3644f44117 upstream.
Clang warns (or errors with CONFIG_WERROR=y / W=e):
drivers/hid/intel-ish-hid/ipc/ipc.c:935:36: error: cast from 'void (*)(struct workqueue_struct *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
935 | if (devm_add_action_or_reset(dev, (void (*)(void *))destroy_workqueue,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/device/devres.h:168:34: note: expanded from macro 'devm_add_action_or_reset'
168 | __devm_add_action_or_ireset(dev, action, data, #action)
| ^~~~~~
This warning is pointing out a kernel control flow integrity (kCFI /
CONFIG_CFI=y) violation will occur due to this function cast when the
destroy_workqueue() is indirectly called via devm_action_release()
because the prototype of destroy_workqueue() does not match the
prototype of (*action)().
Use a local function with the correct prototype to wrap
destroy_workqueue() to resolve the warning and CFI violation.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510190103.qTZvfdjj-lkp@intel.com/
Closes: https://github.com/ClangBuiltLinux/linux/issues/2139
Fixes: 0d30dae38f ("HID: intel-ish-hid: Use dedicated unbound workqueues to prevent resume blocking")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d30dae38f upstream.
During suspend/resume tests with S2IDLE, some ISH functional failures were
observed because of delay in executing ISH resume handler. Here
schedule_work() is used from resume handler to do actual work.
schedule_work() uses system_wq, which is a per CPU work queue. Although
the queuing is not bound to a CPU, but it prefers local CPU of the caller,
unless prohibited.
Users of this work queue are not supposed to queue long running work.
But in practice, there are scenarios where long running work items are
queued on other unbound workqueues, occupying the CPU. As a result, the
ISH resume handler may not get a chance to execute in a timely manner.
In one scenario, one of the ish_resume_handler() executions was delayed
nearly 1 second because another work item on an unbound workqueue occupied
the same CPU. This delay causes ISH functionality failures.
A similar issue was previously observed where the ISH HID driver timed out
while getting the HID descriptor during S4 resume in the recovery kernel,
likely caused by the same workqueue contention problem.
Create dedicated unbound workqueues for all ISH operations to allow work
items to execute on any available CPU, eliminating CPU-specific bottlenecks
and improving resume reliability under varying system loads. Also ISH has
three different components, a bus driver which implements ISH protocols, a
PCI interface layer and HID interface. Use one dedicated work queue for all
of them.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f28beb69c5 upstream.
Some faulty devices (ZWO EFWmini) have a wrong optional HID class
descriptor count compared to the provided length.
Given that we plainly ignore those optional descriptor, we can attempt
to fix the provided number so we do not lock out those devices.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c7fabe4ad9 ]
For years I wondered why the Apple Cinema Display driver would not
just work for me. Turns out the hidraw driver instantly takes it
over. Fix by adding appledisplay VID/PIDs to hid_have_special_driver.
Fixes: 069e8a65cd ("Driver for Apple Cinema Display")
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e13150c1a ]
The `dma_unmap_sg()` functions should be called with the same nents as the
`dma_map_sg()`, not the value the map function returned.
Save the number of entries in struct thc_dma_configuration.
Fixes: a688404b2e ("HID: intel-thc-hid: intel-thc: Add THC DMA interfaces")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ca389a55d8 upstream.
logi_dj_recv_query_paired_devices() and logi_dj_recv_switch_to_dj_mode()
both have 2 callers which all log an error if the function fails. Move
the error logging to inside these 2 functions to remove the duplicated
error logging in the callers.
While at it also move the logi_dj_recv_send_report() call error handling
in logi_dj_recv_switch_to_dj_mode() to directly after the call. That call
only fails if the report cannot be found and in that case it does nothing,
so the msleep() is not necessary on failures.
Fixes: 6f20d32612 ("HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7953794f74 upstream.
HID_GD_Z is mapped to ABS_Z for stylus and pen in hid-input.c. But HID_GD_Z
should be used to report ABS_DISTANCE for stylus and pen as described at:
Documentation/input/event-codes.rst#n226
* ABS_DISTANCE:
- Used to describe the distance of a tool from an interaction surface. This
event should only be emitted while the tool is hovering, meaning in close
proximity of the device and while the value of the BTN_TOUCH code is 0. If
the input device may be used freely in three dimensions, consider ABS_Z
instead.
- BTN_TOOL_<name> should be set to 1 when the tool comes into detectable
proximity and set to 0 when the tool leaves detectable proximity.
BTN_TOOL_<name> signals the type of tool that is currently detected by the
hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH.
This patch makes the correct mapping. The ABS_DISTANCE is currently not mapped
by any HID usage in hid-generic driver.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aba7963544 ]
Currently, hidpp_send_message_sync() retries sending the message when the
device returns a busy error code, specifically HIDPP20_ERROR_BUSY, which
has a different meaning under RAP. This ends up being a problem because
this function is used for both FAP and RAP messages.
This issue is not noticeable on older receivers with unreachable devices
since they return HIDPP_ERROR_RESOURCE_ERROR (0x09), which is not equal to
HIDPP20_ERROR_BUSY (0x08).
However, newer receivers return HIDPP_ERROR_UNKNOWN_DEVICE (0x08) which
happens to equal to HIDPP20_ERROR_BUSY, causing unnecessary retries when
the device is not actually busy.
This is resolved by checking if the error response is FAP or RAP and
picking the respective ERROR_BUSY code.
Fixes: 60165ab774 ("HID: logitech-hidpp: rework one more time the retries attempts")
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Tested-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
- INPUT_PROP_HAPTIC_TOUCHPAD definition added early in 6.18 cycle has
been renamed to INPUT_PROP_PRESSUREPAD to better reflect the kind of
devices it is supposed to be set for
- a new ID for a touchscreen found in Ayaneo Flip DS in Goodix driver
- Goodix driver no longer tries to set reset pin as "input" as it causes
issues when there is no pull up resistor installed on the board
- fixes for cros_ec_keyb, imx_sc_key, and pegasus-notetaker drivers to
deal with potential out-of-bounds access and memory corruption issues
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaSFbUAAKCRBAj56VGEWX
nC+zAQCmxIsTcA4GEPgelW0dRaaKCcCnr++0RQVW5hFJ+0VgTgD6AlzkMtdy5O30
91gz5ooMKSz5SMsgb97N2GlayGKezA0=
=dMey
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- INPUT_PROP_HAPTIC_TOUCHPAD definition added early in 6.18 cycle has
been renamed to INPUT_PROP_PRESSUREPAD to better reflect the kind of
devices it is supposed to be set for
- a new ID for a touchscreen found in Ayaneo Flip DS in Goodix driver
- Goodix driver no longer tries to set reset pin as "input" as it
causes issues when there is no pull up resistor installed on the
board
- fixes for cros_ec_keyb, imx_sc_key, and pegasus-notetaker drivers to
deal with potential out-of-bounds access and memory corruption issues
* tag 'input-for-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: rename INPUT_PROP_HAPTIC_TOUCHPAD to INPUT_PROP_PRESSUREPAD
Input: cros_ec_keyb - fix an invalid memory access
Input: imx_sc_key - fix memory corruption on unload
Input: pegasus-notetaker - fix potential out-of-bounds access
Input: goodix - remove setting of RST pin to input
Input: goodix - add support for ACPI ID GDIX1003
In uclogic_params_ugee_v2_init_event_hooks(), the memory allocated for
event_hook is not freed in the next error path. Fix that by freeing it.
Fixes: a251d6576d ("HID: uclogic: Handle wireless device reconnection")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The memory allocated for buf is not freed in the error paths when
ps_get_report() fails. Free buf before jumping to transfer_failed label
Fixes: 947992c7fa ("HID: playstation: DS4: Fix calibration workaround for clone devices")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
A small bug made it's way here when rewriting code to Linux quality.
Currently, if an effect is not infinite and a program requests it's
playback with the same number of loops, the play command won't be fired
and if an effect is infinite, the spam will continue.
We want every playback update for non-infinite effects and only some
for infinite (detecting when a program requests stop with 0 which will
be different than previous value which is usually 1 or 255).
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use %pe to print a PTR_ERR to silence a cocci warning
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202510300342.WtPn2jF3-lkp@intel.com/
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The ELECOM M-XT3URBK trackball has an additional device ID (0x018F), which
shares the same report descriptor as the existing device (0x00FB). However,
the driver does not currently recognize this new ID, resulting in only five
buttons being functional.
This patch adds the new device ID so that all six buttons work properly.
Signed-off-by: Naoki Ueki <naoki25519@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
And expand it to encompass all pressure pads.
Definition: "pressure pad" as used here as includes all touchpads that
use physical pressure to convert to click, without physical hinges. Also
called haptic touchpads in general parlance, Synaptics calls them
ForcePads.
Most (all?) pressure pads are currently advertised as
INPUT_PROP_BUTTONPAD. The suggestion to identify them as pressure pads
by defining the resolution on ABS_MT_PRESSURE has been in the docs since
commit 20ccc8dd38 ("Documentation: input: define
ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams") but few devices
provide this information.
In userspace it's thus impossible to determine whether a device is a
true pressure pad (pressure equals pressure) or a normal clickpad with
(pressure equals finger size).
Commit 7075ae4ac9 ("Input: add INPUT_PROP_HAPTIC_TOUCHPAD") introduces
INPUT_PROP_HAPTIC_TOUCHPAD but restricted it to those touchpads that
have support for userspace-controlled effects. Let's expand and rename
that definition to include all pressure pad touchpads since those that
do support FF effects can be identified by the presence of the
FF_HAPTIC bit.
This means:
- clickpad: INPUT_PROP_BUTTONPAD
- pressurepad: INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD
- pressurepad with configurable haptics:
INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD + FF_HAPTIC
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://patch.msgid.link/20251106114534.GA405512@tassie
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
USB Elan devices have the same problem as the I2C ones with a fake
battery device showing up.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reported-by: André Barata <andretiagob@protonmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220722
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use a scope-based cleanup helper for the buffer allocated with kmalloc()
in ntrig_report_version() to simplify the cleanup logic and prevent
memory leaks (specifically the !hid_is_usb()-case one).
[jkosina@suse.com: elaborate on the actual existing leak]
Fixes: 185c926283 ("HID: hid-ntrig: fix unable to handle page fault in ntrig_report_version()")
Signed-off-by: Masami Ichikawa <masami256@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Titas reports that the accelerometer sensor on their laptop only
works after a warm boot or unloading/reloading the amd-sfh kernel
module.
Presumably the sensor is in a bad state on cold boot and failing to
start, so explicitly stop it before starting.
Cc: stable@vger.kernel.org
Fixes: 93ce5e0231 ("HID: amd_sfh: Implement SFH1.1 functionality")
Reported-by: Titas <novatitas366@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220670
Tested-by: Titas <novatitas366@gmail.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
SONiX AK870 PRO keyboard pretends to be an apple keyboard by VID:PID,
rendering function keys not treated properly. Despite being a
SONiX USB DEVICE, it uses a different name, so adding it to the list.
Signed-off-by: April Grimoire <april@aprilg.moe>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The keyboard of this device has the following in its report description
for Usage (Keyboard) in Collection (Application):
# 0x15, 0x00, // Logical Minimum (0) 52
# 0x25, 0x65, // Logical Maximum (101) 54
# 0x05, 0x07, // Usage Page (Keyboard) 56
# 0x19, 0x00, // Usage Minimum (0) 58
# 0x29, 0xdd, // Usage Maximum (221) 60
# 0x81, 0x00, // Input (Data,Arr,Abs) 62
Since the Usage Min/Max range exceeds the Logical Min/Max range,
keypresses outside the Logical range are not recognized. This includes,
for example, the Japanese language keyboard variant's keys for |, _ and
\.
Fixup the report description to make the Logical range match the Usage
range, fixing the interpretation of keypresses above 101 on this device.
Signed-off-by: Lauri Tirkkonen <lauri@hacktheplanet.fi>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Based on available evidence, the USB ID 4c4a:4155 used by multiple
devices has been attributed to Jieli. The commit 1a8953f4f7
("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY") affected touchscreen
functionality. Added checks for manufacturer and serial number to
maintain microphone compatibility, enabling both devices to function
properly.
[jkosina@suse.com: edit shortlog]
Fixes: 1a8953f4f7 ("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY")
Cc: stable@vger.kernel.org
Tested-by: staffan.melin@oscillator.se
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Logitech G502 Hero Wireless's high resolution scrolling resets after
being unplugged without notifying the driver, causing extremely slow
scrolling.
The only indication of this is a battery update packet, so add a quirk to
detect when the device is unplugged and re-enable the scrolling.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218037
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The sticky fingers quirk (MT_QUIRK_STICKY_FINGERS) was only considering
the case when slots were not released during the last report.
This can be problematic if the firmware forgets to release a finger
while others are still present.
This was observed on the Synaptics DLL0945 touchpad found on the Dell
XPS 9310 and the Dell Inspiron 5406.
Fixes: 4f4001bc76 ("HID: multitouch: fix rare Win 8 cases when the touch up event gets missing")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID_DG_PEN devices should have a suffix of "Stylus", as pointed out by
commit c0ee1d5716 ("HID: hid-input: Add suffix also for HID_DG_PEN").
However, on multitouch devices, these suffixes may be overridden. Before
that commit, HID_DG_PEN devices would get the "Stylus" suffix, but after
that, multitouch would override them to have an "UNKNOWN" suffix. Just add
HID_DG_PEN to the list of non-overriden suffixes in multitouch.
Before this fix:
[ 0.470981] input: ELAN9008:00 04F3:2E14 UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8
ELAN9008:00 04F3:2E14 UNKNOWN
After this fix:
[ 0.474332] input: ELAN9008:00 04F3:2E14 Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8
ELAN9008:00 04F3:2E14 Stylus
Fixes: c0ee1d5716 ("HID: hid-input: Add suffix also for HID_DG_PEN")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit 581c448476 ("HID: input: map digitizer battery usage") added
handling of battery events for digitizers (typically for batteries
presented in stylii). Digitizers typically report correct battery levels
only when stylus is actively touching the surface, and in other cases
they may report battery level of 0. To avoid confusing consumers of the
battery information the code was added to filer out reports with 0
battery levels.
However there exist other kinds of devices that may legitimately report
0 battery levels. Fix this by filtering out 0-level reports only for
digitizer usages, and continue reporting them for other kinds of devices
(Smart Batteries, etc).
Reported-by: 卢国宏 <luguohong@xiaomi.com>
Fixes: 581c448476 ("HID: input: map digitizer battery usage")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There is a spelling mistake in HID description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Temporarily change CONFIG_HID_HAPTIC to be bool instead of tristate, until
we implement a permanent solution.
Recently the CONFIG_HID_HAPTIC Kconfig option was reported as causing
the following build errors:
MODPOST Module.symvers
ERROR: modpost: "hid_haptic_init" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_pressure_increase" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_check_pressure_unit" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_input_configured" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_input_mapping" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_feature_mapping" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_pressure_reset" [drivers/hid/hid-multitouch.ko] undefined!
make[3]: *** [/home/thl/var/linux.dev/scripts/Makefile.modpost:147: Module.symvers] Error 1
when the kernel is compiled with the following configuration:
CONFIG_HID=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_HAPTIC=m
To resolve this, temporarily change the CONFIG_HID_HAPTIC option to be
bool, until we arrive at a permanent solution to enable CONFIG_HID_HAPTIC
to be tristate.
For a more detailed discussion, see [1].
[1]: https://lore.kernel.org/linux-input/auypydfkhx2eg7vp764way4batdilzc35inqda3exwzs3tk3ff@oagat6g46zto/
Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some controllers are very bad at updating the IMU, leading to these
messages spamming the syslog. Rate-limiting them helps with this a bit.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some third-party controllers, such as the PB Tails CHOC, won't always
respond quickly on startup. Since this packet is needed for probe, and only
once during probe, let's just wait an extra second, which makes connecting
consistent.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds ALWAYS_POLL quirk for the VRS R295 steering wheel joystick.
This device reboots itself every 8-10 seconds if it is not polled.
Signed-off-by: Oleg Makarenko <oleg@makarenk.ooo>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Cooler Master Mice Dongle includes a vendor defined HID interface
alongside its mouse interface. Not polling it will cause the mouse to
stop responding to polls on any interface once woken up again after
going into power saving mode.
Add the HID_QUIRK_ALWAYS_POLL quirk alongside the Cooler Master VID and
the Dongle's PID.
Signed-off-by: Tristan Lobb <tristan.lobb@it-lobb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add the missing PCI ID for the quickspi device used on
the Lenovo Yoga Pro 9i 16IAH10.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=220567
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The original implementation used level detection for the first interrupt
after device reset to avoid potential interrupt line noise and missed
interrupts during the initialization phase. However, this approach
introduced unintended side effects when tested with certain touch panels,
including:
- Delayed hardware interrupt response
- Multiple spurious interrupt triggers
Switching back to edge detection for the first interrupt resolves these
issues while maintaining reliable interrupt handling.
Extensive testing across multiple platforms with touch panels from
various vendors confirms this change introduces no regressions.
[jkosina@suse.com: properly capitalize shortlog]
Fixes: 9d8d51735a ("HID: intel-thc-hid: intel-quickspi: Add HIDSPI protocol implementation")
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The type definition of qcdev->i2c_max_frame_size is already
u32, so remove the unnecessary type casting le16_to_cpu.
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509280841.pxmgBzKW-lkp@intel.com/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
