[ Upstream commit 1c17f4373d ]
In {tcp6,udp6,raw6}_sock, struct ipv6_pinfo is always placed at
the beginning of a new cache line because
1. __alignof__(struct tcp_sock) is 64 due to ____cacheline_aligned
of __cacheline_group_begin(tcp_sock_write_tx)
2. __alignof__(struct udp_sock) is 64 due to ____cacheline_aligned
of struct numa_drop_counters
3. in raw6_sock, struct numa_drop_counters is placed before
struct ipv6_pinfo
. struct ipv6_pinfo is 136 bytes, but the last cache line is
only used by ipv6_fl_list:
$ pahole -C ipv6_pinfo vmlinux
struct ipv6_pinfo {
...
/* --- cacheline 2 boundary (128 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 128 8 */
/* size: 136, cachelines: 3, members: 23 */
Let's move ipv6_fl_list from struct ipv6_pinfo to struct inet_sock
to save a full cache line for {tcp6,udp6,raw6}_sock.
Now, struct ipv6_pinfo is 128 bytes, and {tcp6,udp6,raw6}_sock have
64 bytes less, while {tcp,udp,raw}_sock retain the same size.
Before:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1408
UDPv6 1472
TCPv6 2560
RAW 1152
UDP 1280
TCP 2368
After:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1344
UDPv6 1408
TCPv6 2496
RAW 1152
UDP 1280
TCP 2368
Also, ipv6_fl_list and inet_flags (SNDFLOW bit) are placed in the
same cache line.
$ pahole -C inet_sock vmlinux
...
/* --- cacheline 11 boundary (704 bytes) was 56 bytes ago --- */
struct ipv6_pinfo * pinet6; /* 760 8 */
/* --- cacheline 12 boundary (768 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 768 8 */
unsigned long inet_flags; /* 776 8 */
Doc churn is due to the insufficient Type column (only 1 space short).
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251014224210.2964778-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 858d2a4f67 ("tcp: fix potential race in tcp_v6_syn_recv_sock()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0fa7879c9 ]
Add support for customer ID 0x1621 found on ASRock Z590 Taichi
boards using the Nuvoton NCT6686D embedded controller.
This allows the driver to instantiate without requiring the
force=1 module parameter.
Tested on two separate ASRock Z590 Taichi boards, both with
EC firmware version 1.0 build 01/25/21.
Signed-off-by: Anj Duvnjak <avian@extremenerds.net>
Link: https://lore.kernel.org/r/20251222220942.10762-1-avian@extremenerds.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e6f13f6d5 ]
Commit fe8cd2736e ("cgroup/cpuset: Delay setting of CS_CPU_EXCLUSIVE
until valid partition") introduced a new check to disallow the setting
of a new cpuset.cpus.exclusive value that is a superset of a sibling's
cpuset.cpus value so that there will at least be one CPU left in the
sibling in case the cpuset becomes a valid partition root. This new
check does have the side effect of failing a cpuset.cpus change that
make it a subset of a sibling's cpuset.cpus.exclusive value.
With v2, users are supposed to be allowed to set whatever value they
want in cpuset.cpus without failure. To maintain this rule, the check
is now restricted to only when cpuset.cpus.exclusive is being changed
not when cpuset.cpus is changed.
The cgroup-v2.rst doc file is also updated to reflect this change.
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 80ca113671 upstream.
In the original txt format binding document ak4458.txt, the supply names
are 'AVDD-supply', 'DVDD-supply', and they are also used in driver. But in
the commit converting to yaml format, they are changed to 'avdd-supply',
'dvdd-supply'. After search all the dts file, these names 'AVDD-supply',
'DVDD-supply', 'avdd-supply', 'dvdd-supply' are not used in any dts
file. So it is safe to fix the yaml binding document.
Fixes: 829d78e3ea ("ASoC: dt-bindings: ak5558: Convert to dtschema")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212021829.3244736-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e570a5ca30 upstream.
In the original txt format binding document ak4458.txt, the supply names
are 'AVDD-supply', 'DVDD-supply', and they are also used in driver. But in
the commit converting to yaml format, they are changed to 'avdd-supply',
'dvdd-supply'. After search all the dts file, these names 'AVDD-supply',
'DVDD-supply', 'avdd-supply', 'dvdd-supply' are not used in any dts
file. So it is safe to fix this yaml binding document.
Fixes: 009e83b591 ("ASoC: dt-bindings: ak4458: Convert to dtschema")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212021829.3244736-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50a634f1d7 upstream.
When including the dai-common.yaml, and allow '#sound-dai-cells' and
"sound-name-prefix' to be used, should use unevaluatedProperties:false
according to writing-bindings.rst.
Fixes: 8d7de4a014 ("ASoC: dt-bindings: asahi-kasei,ak4458: Reference common DAI properties")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212021829.3244736-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 555e882051 upstream.
Add missing vdda-phy-supply and vdda-pll-supply in the (monaco)qcs8300
camss binding. While enabling imx412 sensor for qcs8300 we see a need
to add these supplies which were missing in initial submission.
Fixes: 634a2958fa ("media: dt-bindings: Add qcom,qcs8300-camss compatible")
Cc: stable@vger.kernel.org
Co-developed-by: Nihal Kumar Gupta <quic_nihalkum@quicinc.com>
Signed-off-by: Nihal Kumar Gupta <quic_nihalkum@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b99eeacf6 upstream.
On X Elite platform, the eDP PHY uses one more clock called ref.
The current X Elite devices supported upstream work fine without this
clock, because the boot firmware leaves this clock enabled. But we should
not rely on that. Also, even though this change breaks the ABI, it is
needed in order to make the driver disables this clock along with the
other ones, for a proper bring-down of the entire PHY.
So attach the this ref clock to the PHY.
Cc: stable@vger.kernel.org # v6.10
Fixes: 5d56078613 ("dt-bindings: phy: qcom-edp: Add X1E80100 PHY compatibles")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://patch.msgid.link/20251224-phy-qcom-edp-add-missing-refclk-v5-1-3f45d349b5ac@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0201eedb69 ]
Following part was needed before the blamed commit, because
inet_getpeer_v6() second argument was the prefix.
/* Give more bandwidth to wider prefixes. */
if (rt->rt6i_dst.plen < 128)
tmo >>= ((128 - rt->rt6i_dst.plen)>>5);
Now inet_getpeer_v6() retrieves hosts, we need to remove
@tmo adjustement or wider prefixes likes /24 allow 8x
more ICMP to be sent for a given ratelimit.
As we had this issue for a while, this patch changes net.ipv6.icmp.ratelimit
default value from 1000ms to 100ms to avoid potential regressions.
Also add a READ_ONCE() when reading net->ipv6.sysctl.icmpv6_time.
Fixes: fd0273d793 ("ipv6: Remove external dependency on rt6i_dst and rt6i_src")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260216142832.3834174-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30176bf7c8 ]
Phase-adjust values are currently limited by a min-max range. Some
hardware requires, for certain pin types, that values be multiples of
a specific granularity, as in the zl3073x driver.
Add a `phase-adjust-gran` pin attribute and an appropriate field in
dpll_pin_properties. If set by the driver, use its value to validate
user-provided phase-adjust values.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20251029153207.178448-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 5d41f95f5d ("dpll: zl3073x: Fix output pin phase adjustment sign")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad0c6da5be ]
Fix copy & paste errors by changing the references from 'ntb' to 'vntb'.
Fixes: 4ac8c8e52c ("Documentation: PCI: Add specification for the PCI vNTB function device")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[mani: squashed the patches and fixed more errors]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/b51c2a69ffdbfa2c359f5cf33f3ad2acc3db87e4.1762154911.git.baruch@tkos.co.il
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a9bc9e3f4 ]
fou_udp_recv() has the same problem mentioned in the previous
patch.
If FOU_ATTR_IPPROTO is set to 0, skb is not freed by
fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu().
Let's forbid 0 for FOU_ATTR_IPPROTO.
Fixes: 23461551c0 ("fou: Support for foo-over-udp RX path")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260115172533.693652-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e60c6f34b9 upstream.
Commit b8d3404058 ("dt-bindings: PCI: qcom,pcie-sm8550: Move SM8550 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: b8d3404058 ("dt-bindings: PCI: qcom,pcie-sm8550: Move SM8550 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-8-28c1f11599fe@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 667facc400 upstream.
Commit 88c9b3af4e ("dt-bindings: PCI: qcom,pcie-sm8450: Move SM8450 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 88c9b3af4e ("dt-bindings: PCI: qcom,pcie-sm8450: Move SM8450 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-7-28c1f11599fe@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 012ba0d5f0 upstream.
Commit 2278b8b547 ("dt-bindings: PCI: qcom,pcie-sm8350: Move SM8350 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 2278b8b547 ("dt-bindings: PCI: qcom,pcie-sm8350: Move SM8350 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-6-28c1f11599fe@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2620c6bcd8 upstream.
Commit 4891b66185 ("dt-bindings: PCI: qcom,pcie-sm8250: Move SM8250 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 4891b66185 ("dt-bindings: PCI: qcom,pcie-sm8250: Move SM8250 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-5-28c1f11599fe@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31cb432b62 upstream.
Commit 51bc04d5b4 ("dt-bindings: PCI: qcom,pcie-sm8150: Move SM8150 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 51bc04d5b4 ("dt-bindings: PCI: qcom,pcie-sm8150: Move SM8150 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-4-28c1f11599fe@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea55160140 upstream.
Commit c007a55055 ("dt-bindings: PCI: qcom,pcie-sc8280xp: Move
SC8280XP to dedicated schema") move the device schema to separate file,
but it missed a "if:not:...then:" clause in the original binding which
was requiring power-domains and resets for this particular chip.
Fixes: c007a55055 ("dt-bindings: PCI: qcom,pcie-sc8280xp: Move SC8280XP to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-3-28c1f11599fe@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef99c2efea upstream.
Commit 756485bfbb ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 756485bfbb ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-2-28c1f11599fe@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d4e746aa9 upstream.
Fix below warnings generated dt_bindings_check for examples in the
bindings.
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): 'audio-codec@1,0' does not match
any of the regexes: '^pinctrl-[0-9]+$', '^slim@[0-9a-f]+$'
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): #address-cells: 1 was expected
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): 'dmas' is a required property
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): 'dma-names' is a required
property
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Fixes: 7cbba32a2d ("slimbus: qcom: remove unused qcom controller driver")
Cc: stable <stable@kernel.org>
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20251114110505.143105-1-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed724ea1b8 upstream.
Enable use of common SDHCI-related properties such as sdhci-caps-mask as
found in the AST2600 EVB DTS.
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4813dea9e2 ]
Binding incorrectly specifies the 'DBI' region as 'ELBI'. DBI is a must
have region for DWC controllers as it has the Root Port and controller
specific registers, while ELBI has optional registers.
Hence, fix the binding. Though this is an ABI break, this change is needed
to accurately describe the PCI memory map.
Fixes: 7cd2103911 ("dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251101-pci-meson-fix-v1-1-c50dcc56ed6a@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 674e2b2479 ]
This command:
# echo foo/bar >/proc/$$/attr/smack/current
gives the task a label 'foo' w/o indication
that label does not match input.
Setting the label with lsm_set_self_attr() syscall
behaves identically.
This occures because:
1) smk_parse_smack() is used to convert input to a label
2) smk_parse_smack() takes only that part from the
beginning of the input that looks like a label.
3) `/' is prohibited in labels, so only "foo" is taken.
(2) is by design, because smk_parse_smack() is used
for parsing strings which are more than just a label.
Silent failure is not a good thing, and there are two
indicators that this was not done intentionally:
(size >= SMK_LONGLABEL) ~> invalid
clause at the beginning of the do_setattr() and the
"Returns the length of the smack label" claim
in the do_setattr() description.
So I fixed this by adding one tiny check:
the taken label length == input length.
Since input length is now strictly controlled,
I changed the two ways of setting label
smack_setselfattr(): lsm_set_self_attr() syscall
smack_setprocattr(): > /proc/.../current
to accommodate the divergence in
what they understand by "input length":
smack_setselfattr counts mandatory \0 into input length,
smack_setprocattr does not.
smack_setprocattr allows various trailers after label
Related changes:
* fixed description for smk_parse_smack
* allow unprivileged tasks validate label syntax.
* extract smk_parse_label_len() from smk_parse_smack()
so parsing may be done w/o string allocation.
* extract smk_import_valid_label() from smk_import_entry()
to avoid repeated parsing.
* smk_parse_smack(): scan null-terminated strings
for no more than SMK_LONGLABEL(256) characters
* smack_setselfattr(): require struct lsm_ctx . flags == 0
to reserve them for future.
Fixes: e114e47377 ("Smack: Simplified Mandatory Access Control Kernel")
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78fc6a94be ]
According to [1], the label of a UNIX domain socket (UDS)
file (i.e., the filesystem object representing the socket)
is not supposed to participate in Smack security.
To achieve this, [1] labels UDS files with "*"
in smack_d_instantiate().
Before [2], smack_d_instantiate() was responsible
for initializing Smack security for all inodes,
except ones under /proc
[2] imposed the sole responsibility for initializing
inode security for newly created filesystem objects
on smack_inode_init_security().
However, smack_inode_init_security() lacks some logic
present in smack_d_instantiate().
In particular, it does not label UDS files with "*".
This patch adds the missing labeling of UDS files
with "*" to smack_inode_init_security().
Labeling UDS files with "*" in smack_d_instantiate()
still works for stale UDS files that already exist on
disk. Stale UDS files are useless, but I keep labeling
them for consistency and maybe to make easier for user
to delete them.
Compared to [1], this version introduces the following
improvements:
* UDS file label is held inside inode only
and not saved to xattrs.
* relabeling UDS files (setxattr, removexattr, etc.)
is blocked.
[1] 2010-11-24 Casey Schaufler
commit b4e0d5f079 ("Smack: UDS revision")
[2] 2023-11-16 roberto.sassu
Fixes: e63d86b8b7 ("smack: Initialize the in-memory inode in smack_inode_init_security()")
Link: https://lore.kernel.org/linux-security-module/20231116090125.187209-5-roberto.sassu@huaweicloud.com/
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a6cdfd69ad upstream.
Drop "uart-has-rtscts: false" from binding as the IP supports hardware
flow control on all SoCs.
Cc: stable@kernel.org
Fixes: 25422e8f46 ("dt-bindings: serial: Add compatible for Renesas RZ/T2H SoC in sci")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114101350.106699-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba2457109d upstream.
Sasha has also maintaining stable branch in conjunction with Greg
since cb5d21946d ("MAINTAINERS: Add Sasha as a stable branch
maintainer"). Mention him in 2.Process.rst.
Cc: stable@vger.kernel.org
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251022034336.22839-1-bagasdotme@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- INPUT_PROP_HAPTIC_TOUCHPAD definition added early in 6.18 cycle has
been renamed to INPUT_PROP_PRESSUREPAD to better reflect the kind of
devices it is supposed to be set for
- a new ID for a touchscreen found in Ayaneo Flip DS in Goodix driver
- Goodix driver no longer tries to set reset pin as "input" as it causes
issues when there is no pull up resistor installed on the board
- fixes for cros_ec_keyb, imx_sc_key, and pegasus-notetaker drivers to
deal with potential out-of-bounds access and memory corruption issues
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaSFbUAAKCRBAj56VGEWX
nC+zAQCmxIsTcA4GEPgelW0dRaaKCcCnr++0RQVW5hFJ+0VgTgD6AlzkMtdy5O30
91gz5ooMKSz5SMsgb97N2GlayGKezA0=
=dMey
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- INPUT_PROP_HAPTIC_TOUCHPAD definition added early in 6.18 cycle has
been renamed to INPUT_PROP_PRESSUREPAD to better reflect the kind of
devices it is supposed to be set for
- a new ID for a touchscreen found in Ayaneo Flip DS in Goodix driver
- Goodix driver no longer tries to set reset pin as "input" as it
causes issues when there is no pull up resistor installed on the
board
- fixes for cros_ec_keyb, imx_sc_key, and pegasus-notetaker drivers to
deal with potential out-of-bounds access and memory corruption issues
* tag 'input-for-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: rename INPUT_PROP_HAPTIC_TOUCHPAD to INPUT_PROP_PRESSUREPAD
Input: cros_ec_keyb - fix an invalid memory access
Input: imx_sc_key - fix memory corruption on unload
Input: pegasus-notetaker - fix potential out-of-bounds access
Input: goodix - remove setting of RST pin to input
Input: goodix - add support for ACPI ID GDIX1003
- Fix register naming in the Mediatek mt8189 driver.
- Select REGMAP_MMIO for the Realtek RTD driver.
- Fix the number of items in groups in the Toshiba
Visconti driver.
- Fix a memory leak in the Cirrus CS42L43 driver.
- Fix a deadlock (!) in Qualcomm pinmux configuration.
- Fix use of uninitialized memory and list initialization
in the S32CC pin controller.
-----BEGIN PGP SIGNATURE-----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=dfY2
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix register naming in the Mediatek mt8189 driver
- Select REGMAP_MMIO for the Realtek RTD driver
- Fix the number of items in groups in the Toshiba Visconti driver
- Fix a memory leak in the Cirrus CS42L43 driver
- Fix a deadlock (!) in Qualcomm pinmux configuration
- Fix use of uninitialized memory and list initialization in the S32CC
pin controller
* tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: xlnx,versal-pinctrl: Add missing unevaluatedProperties on '^conf' nodes
pinctrl: s32cc: initialize gpio_pin_config::list after kmalloc()
pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc
pinctrl: qcom: msm: Fix deadlock in pinmux configuration
pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()
dt-bindings: pinctrl: toshiba,visconti: Fix number of items in groups
pinctrl: realtek: Select REGMAP_MMIO for RTD driver
pinctrl: mediatek: mt8189: align register base names to dt-bindings ones
pinctrl: mediatek: mt8196: align register base names to dt-bindings ones
Fixes
- acer-wmi: Ignore backlight event
- alienware-wmi-wmax: Fix quirk match table order & drop redundant entries
- amd/pmc:
- Add Xbox Ally to spurious 8042 quirk list
- Quirk list Lenovo Legion Go 2 NVMe resume
- msi-wmi-platform:
- Correct GUID to uppercase
- GUID is uncleverly copy-pasted from an example so add a DMI whitelist
- intel/speed_select_if: PCIBIOS_* return code conversion
- intel-uncore-freq & ISST: Fix kernel doc warnings
New HW support
- alienware-wmi-wmax:
- Alienware 16 Aurora support
- Alienware M support
- Alienware X support
- Dell G support
- amd/pmc:
- ROG Xbox Ally (non-X) support
- huaway-wmi: HONOR MagicBoox X16/X14 PrintScreen & YOYO keys
- hp-wmi:
- Omen 16-wf1xxx fan support
- Omen MAX 16-ah0xx fan + thermal profile support
- Victus 16-r0 and 16-s0 fan + thermal profile support
- intel/hid: Intel Nova Lake support
- intel-uncore-freq:
- Intel Panther Lake support
- Intel Wildcat Lake support
- Intel Nova Lake support
The following is an automated shortlog grouped by driver:
acer-wmi:
- Ignore backlight event
alienware-wmi-wmax:
- Add AWCC support to Alienware 16 Aurora
- Add support for the whole "G" family
- Add support for the whole "M" family
- Add support for the whole "X" family
- Drop redundant DMI entries
- Fix "Alienware m16 R1 AMD" quirk order
amd: pmc:
- Add Lenovo Legion Go 2 to pmc quirk list
amd/pmc:
- Add spurious_8042 to Xbox Ally
- Add support for Van Gogh SoC
hp-wmi:
- Add Omen 16-wf1xxx fan support
- Add Omen MAX 16-ah0xx fan support and thermal profile
- mark Victus 16-r0 and 16-s0 for victus_s fan and thermal profile support
huawei-wmi:
- add keys for HONOR models
intel/hid:
- Add Nova Lake support
intel/speed_select_if:
- Convert PCIBIOS_* return codes to errnos
intel-uncore-freq:
- Add additional client processors
- fix all header kernel-doc warnings
ISST: isst_if.h:
- fix all kernel-doc warnings
msi-wmi-platform:
- Fix typo in WMI GUID
- Only load on MSI devices
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaR9GsgAKCRBZrE9hU+XO
MU2qAQD8C75ebO/ltd9LZ4oTzfe0P6kmV+28z0D97tFsFmt0hwEA/fZHU/bV1+3c
+gRnoLCl4yPh214OgWnmsciPhW3iyAM=
=AtKC
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"This one has lots of new HW entries which adds to the size in diffstat
but the individual changes are simple.
Fixes
- acer-wmi: Ignore backlight event
- alienware-wmi-wmax: Fix quirk match table order & drop redundant
entries
- amd/pmc:
- Add Xbox Ally to spurious 8042 quirk list
- Quirk list Lenovo Legion Go 2 NVMe resume
- msi-wmi-platform:
- Correct GUID to uppercase
- GUID is uncleverly copy-pasted from an example so add a DMI
whitelist
- intel/speed_select_if: PCIBIOS_* return code conversion
- intel-uncore-freq & ISST: Fix kernel doc warnings
New HW support
- alienware-wmi-wmax:
- Alienware 16 Aurora support
- Alienware M support
- Alienware X support
- Dell G support
- amd/pmc:
- ROG Xbox Ally (non-X) support
- huaway-wmi: HONOR MagicBoox X16/X14 PrintScreen & YOYO keys
- hp-wmi:
- Omen 16-wf1xxx fan support
- Omen MAX 16-ah0xx fan + thermal profile support
- Victus 16-r0 and 16-s0 fan + thermal profile support
- intel/hid: Intel Nova Lake support
- intel-uncore-freq:
- Intel Panther Lake support
- Intel Wildcat Lake support
- Intel Nova Lake support"
* tag 'platform-drivers-x86-v6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits)
platform/x86: intel-uncore-freq: fix all header kernel-doc warnings
platform/x86: acer-wmi: Ignore backlight event
platform/x86/intel/speed_select_if: Convert PCIBIOS_* return codes to errnos
platform/x86/intel/hid: Add Nova Lake support
platform/x86: alienware-wmi-wmax: Add AWCC support to Alienware 16 Aurora
platform/x86: hp-wmi: Add Omen MAX 16-ah0xx fan support and thermal profile
platform/x86: msi-wmi-platform: Fix typo in WMI GUID
platform/x86: msi-wmi-platform: Only load on MSI devices
platform/x86/amd: pmc: Add Lenovo Legion Go 2 to pmc quirk list
platform/x86/amd/pmc: Add spurious_8042 to Xbox Ally
platform/x86/amd/pmc: Add support for Van Gogh SoC
platform/x86: alienware-wmi-wmax: Add support for the whole "G" family
platform/x86: alienware-wmi-wmax: Add support for the whole "X" family
platform/x86: alienware-wmi-wmax: Add support for the whole "M" family
platform/x86: alienware-wmi-wmax: Drop redundant DMI entries
platform/x86: alienware-wmi-wmax: Fix "Alienware m16 R1 AMD" quirk order
platform/x86: ISST: isst_if.h: fix all kernel-doc warnings
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: hp-wmi: Add Omen 16-wf1xxx fan support
platform/x86: huawei-wmi: add keys for HONOR models
...
Add the missing unevaluatedProperties to disallow extra properties on
the '^conf' nodes.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
And expand it to encompass all pressure pads.
Definition: "pressure pad" as used here as includes all touchpads that
use physical pressure to convert to click, without physical hinges. Also
called haptic touchpads in general parlance, Synaptics calls them
ForcePads.
Most (all?) pressure pads are currently advertised as
INPUT_PROP_BUTTONPAD. The suggestion to identify them as pressure pads
by defining the resolution on ABS_MT_PRESSURE has been in the docs since
commit 20ccc8dd38 ("Documentation: input: define
ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams") but few devices
provide this information.
In userspace it's thus impossible to determine whether a device is a
true pressure pad (pressure equals pressure) or a normal clickpad with
(pressure equals finger size).
Commit 7075ae4ac9 ("Input: add INPUT_PROP_HAPTIC_TOUCHPAD") introduces
INPUT_PROP_HAPTIC_TOUCHPAD but restricted it to those touchpads that
have support for userspace-controlled effects. Let's expand and rename
that definition to include all pressure pad touchpads since those that
do support FF effects can be identified by the presence of the
FF_HAPTIC bit.
This means:
- clickpad: INPUT_PROP_BUTTONPAD
- pressurepad: INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD
- pressurepad with configurable haptics:
INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD + FF_HAPTIC
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://patch.msgid.link/20251106114534.GA405512@tassie
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
A collection of small fixes. All changes are device-specific, and
nothing stands out.
- A regression fix for HD-audio HDMI probe
- USB-audio hardening patches for issues spotted by fuzzers
- ASoC fixes for TAS278x, SoundWire and Cirrus
- Usual HD-audio and USB-audio quirks
-----BEGIN PGP SIGNATURE-----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=Mj01
-----END PGP SIGNATURE-----
Merge tag 'sound-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are device-specific, and
nothing stands out.
- A regression fix for HD-audio HDMI probe
- USB-audio hardening patches for issues spotted by fuzzers
- ASoC fixes for TAS278x, SoundWire and Cirrus
- Usual HD-audio and USB-audio quirks"
* tag 'sound-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add native DSD quirks for PureAudio DAC series
ASoC: rsnd: fix OF node reference leak in rsnd_ssiu_probe()
ALSA: hda/tas2781: Correct the wrong project ID
ALSA: usb-audio: Fix NULL pointer dereference in snd_usb_mixer_controls_badd
ASoC: SDCA: bug fix while parsing mipi-sdca-control-cn-list
ALSA: usb-audio: Fix potential overflow of PCM transfer buffer
ALSA: hda/tas2781: Add new quirk for HP new projects
ASoC: tas2781: fix getting the wrong device number
ASoC: codecs: va-macro: fix resource leak in probe error path
ASoC: tas2783A: Fix issues in firmware parsing
ASoC: sdw_utils: fix device reference leak in is_sdca_endpoint_present()
ASoC: cs4271: Fix regulator leak on probe failure
ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver
ASoC: da7213: Use component driver suspend/resume
ALSA: usb-audio: add min_mute quirk for SteelSeries Arctis
ASoC: doc: cs35l56: Update firmware filename description for B0 silicon
The WMI driver core only supports GUID strings containing only
uppercase characters, however the GUID string used by the
msi-wmi-platform driver contains a single lowercase character.
This prevents the WMI driver core from matching said driver to
its WMI device.
Fix this by turning the lowercase character into a uppercase
character. Also update the WMI driver development guide to warn
about this.
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Fixes: 9c0beb6b29 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251110111253.16204-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
- use the firmware node of the GPIO chip, not its label for software
node lookup
- fix invalid pointer access in GPIO debugfs
- drop unused functions from gpio-tb10x
- fix a regression in gpio-aggregator: restore the set_config() callback
in the driver
- correct schema $id path in ti,twl4030 DT bindings
-----BEGIN PGP SIGNATURE-----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=4JGk
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use the firmware node of the GPIO chip, not its label for software
node lookup
- fix invalid pointer access in GPIO debugfs
- drop unused functions from gpio-tb10x
- fix a regression in gpio-aggregator: restore the set_config()
callback in the driver
- correct schema $id path in ti,twl4030 DT bindings
* tag 'gpio-fixes-for-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tb10x: Drop unused tb10x_set_bits() function
gpio: aggregator: restore the set_config operation
gpiolib: fix invalid pointer access in debugfs
gpio: swnode: don't use the swnode's name as the key for GPIO lookup
dt-bindings: gpio: ti,twl4030: Correct the schema $id path
Fix typo "handul" to "handful" and remove outdated limitation
stating only generic netlink is supported (we have netlink-raw).
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251105192908.686458-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update the text for firmware file naming to show that the l?u? suffix is
supported on CS35L56 B0 silicon and ampN was only used on early firmware.
The previous version of this text only said that B0 silicon used the ampN
suffix. Since kernel 6.16 the driver supports both the old ampN and
new l?u? suffix for B0 silicon. New firmwares will use the l?u? suffix.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251103115809.33953-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The $id for a binding should match its file path. The ti,twl4030-gpio
binding is located in the gpio/ subdirectory but was missing this from
its $id.
Correct the path to follow the standard convention.
Fixes: 842dcff8e2 ("dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Fixes: 842dcff8e2 ("dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema")
Link: https://lore.kernel.org/r/20250821194710.16043-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
A collection of small fixes. It became slightly bigger than usual
due to timing issues (holidays, etc), but all changes are rather
device-specific fixes, so not really worrisome.
- ASoC Cirrus codec fixes for AMD
- Various fixes for ASoC Intel AVS, Qualcomm, SoundWire, FSL,
Mediatek, Renesas,
- A few HD-audio quirks, and USB-audio regression fixes for Presonus
-----BEGIN PGP SIGNATURE-----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=8X1t
-----END PGP SIGNATURE-----
Merge tag 'sound-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. It became slightly bigger than usual due
to timing issues (holidays, etc), but all changes are rather
device-specific fixes, so not really worrisome.
- ASoC Cirrus codec fixes for AMD
- Various fixes for ASoC Intel AVS, Qualcomm, SoundWire, FSL,
Mediatek, Renesas
- A few HD-audio quirks, and USB-audio regression fixes for Presonus"
* tag 'sound-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda/realtek: Enable mic on Vaio RPL
ASoC: dt-bindings: pm4125-sdw: correct number of soundwire ports
ASoC: renesas: rz-ssi: Use proper dma_buffer_pos after resume
ASoC: soc_sdw_utils: remove cs42l43 component_name
ASoC: fsl_sai: Fix sync error in consumer mode
ASoC: Fix build for sdw_utils
ALSA: hda/realtek: Fix mute led for HP Victus 15-fa1xxx (MB 8C2D)
ASoC: rt721: fix prepare clock stop failed
ALSA: usb-audio: don't log messages meant for 1810c when initializing 1824c
ASoC: mediatek: Fix double pm_runtime_disable in remove functions
ASoC: fsl_micfil: correct the endian format for DSD
ASoC: fsl_sai: fix bit order for DSD format
ASoC: Intel: avs: Use snd_codec format when initializing probe
ASoC: Intel: avs: Disable periods-elapsed work when closing PCM
ASoC: Intel: avs: Unprepare a stream when XRUN occurs
ASoC: sdw_utils: add name_prefix for rt1321 part id
ASoC: qdsp6: q6asm: do not sleep while atomic
ASoC: Intel: soc-acpi-intel-ptl-match: Remove cs42l43 match from sdw link3
ASOC: max98090/91: fix for filter configuration: AHPF removed DMIC2_HPF added
ASoC: amd: acp: Add ACP7.0 match entries for cs35l56 and cs42l43
...
Breno Leitao has been listed in MAINTAINERS as netconsole maintainer
since 7c938e438c ("MAINTAINERS: make Breno the netconsole
maintainer"), but the documentation says otherwise that bug reports
should be sent to original netconsole authors.
Remove obsolate contact info.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251028132027.48102-1-bagasdotme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For some reason we ended up limiting the number of soundwire ports to 2
in the bindings, the actual codec supports 4 rx and 5 tx ports.
Fixes: 88d0d17192 ("ASoC: dt-bindings: add bindings for pm4125 audio codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251029144636.357203-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 267bca002c ("dt-bindings: net: sparx5: correct LAN969x register
space windows") said that LAN969x has exactly two address spaces ("reg"
property) but implemented it as 2 or more. Narrow the constraint to
properly express that only two items are allowed, which also matches
Linux driver.
Fixes: 267bca002c ("dt-bindings: net: sparx5: correct LAN969x register space windows")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251026101741.20507-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dpll.yaml spec incorrectly omitted module-name and clock-id from the
pin-get operation reply specification, even though the kernel DPLL
implementation has always included these attributes in pin-get responses
since the initial implementation.
This spec inconsistency caused issues with the C YNL code generator.
The generated dpll_pin_get_rsp structure was missing these fields.
Fix the spec by adding module-name and clock-id to the pin-attrs reply
specification to match the actual kernel behavior.
Fixes: 3badff3a25 ("dpll: spec: Add Netlink spec in YAML")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251024185512.363376-1-poros@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4mow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykXPACfVp7KKDyM+10AxrV/xccYT53iUaAAoMQEWvES
/0acQXalH6XunybjHkOd
=cBYS
-----END PGP SIGNATURE-----
Merge tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4nSw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yliXgCfZzBRNhHGVV0gQrBy2dz9owzfhLQAoISf3He8
dwzYP7TSYXungxfq9dSL
=NaGG
-----END PGP SIGNATURE-----
Merge tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
