commit 80ca113671 upstream.
In the original txt format binding document ak4458.txt, the supply names
are 'AVDD-supply', 'DVDD-supply', and they are also used in driver. But in
the commit converting to yaml format, they are changed to 'avdd-supply',
'dvdd-supply'. After search all the dts file, these names 'AVDD-supply',
'DVDD-supply', 'avdd-supply', 'dvdd-supply' are not used in any dts
file. So it is safe to fix the yaml binding document.
Fixes: 829d78e3ea ("ASoC: dt-bindings: ak5558: Convert to dtschema")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212021829.3244736-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e570a5ca30 upstream.
In the original txt format binding document ak4458.txt, the supply names
are 'AVDD-supply', 'DVDD-supply', and they are also used in driver. But in
the commit converting to yaml format, they are changed to 'avdd-supply',
'dvdd-supply'. After search all the dts file, these names 'AVDD-supply',
'DVDD-supply', 'avdd-supply', 'dvdd-supply' are not used in any dts
file. So it is safe to fix this yaml binding document.
Fixes: 009e83b591 ("ASoC: dt-bindings: ak4458: Convert to dtschema")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212021829.3244736-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50a634f1d7 upstream.
When including the dai-common.yaml, and allow '#sound-dai-cells' and
"sound-name-prefix' to be used, should use unevaluatedProperties:false
according to writing-bindings.rst.
Fixes: 8d7de4a014 ("ASoC: dt-bindings: asahi-kasei,ak4458: Reference common DAI properties")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212021829.3244736-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 555e882051 upstream.
Add missing vdda-phy-supply and vdda-pll-supply in the (monaco)qcs8300
camss binding. While enabling imx412 sensor for qcs8300 we see a need
to add these supplies which were missing in initial submission.
Fixes: 634a2958fa ("media: dt-bindings: Add qcom,qcs8300-camss compatible")
Cc: stable@vger.kernel.org
Co-developed-by: Nihal Kumar Gupta <quic_nihalkum@quicinc.com>
Signed-off-by: Nihal Kumar Gupta <quic_nihalkum@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b99eeacf6 upstream.
On X Elite platform, the eDP PHY uses one more clock called ref.
The current X Elite devices supported upstream work fine without this
clock, because the boot firmware leaves this clock enabled. But we should
not rely on that. Also, even though this change breaks the ABI, it is
needed in order to make the driver disables this clock along with the
other ones, for a proper bring-down of the entire PHY.
So attach the this ref clock to the PHY.
Cc: stable@vger.kernel.org # v6.10
Fixes: 5d56078613 ("dt-bindings: phy: qcom-edp: Add X1E80100 PHY compatibles")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://patch.msgid.link/20251224-phy-qcom-edp-add-missing-refclk-v5-1-3f45d349b5ac@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e60c6f34b9 upstream.
Commit b8d3404058 ("dt-bindings: PCI: qcom,pcie-sm8550: Move SM8550 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: b8d3404058 ("dt-bindings: PCI: qcom,pcie-sm8550: Move SM8550 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-8-28c1f11599fe@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 667facc400 upstream.
Commit 88c9b3af4e ("dt-bindings: PCI: qcom,pcie-sm8450: Move SM8450 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 88c9b3af4e ("dt-bindings: PCI: qcom,pcie-sm8450: Move SM8450 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-7-28c1f11599fe@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 012ba0d5f0 upstream.
Commit 2278b8b547 ("dt-bindings: PCI: qcom,pcie-sm8350: Move SM8350 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 2278b8b547 ("dt-bindings: PCI: qcom,pcie-sm8350: Move SM8350 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-6-28c1f11599fe@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2620c6bcd8 upstream.
Commit 4891b66185 ("dt-bindings: PCI: qcom,pcie-sm8250: Move SM8250 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 4891b66185 ("dt-bindings: PCI: qcom,pcie-sm8250: Move SM8250 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-5-28c1f11599fe@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31cb432b62 upstream.
Commit 51bc04d5b4 ("dt-bindings: PCI: qcom,pcie-sm8150: Move SM8150 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 51bc04d5b4 ("dt-bindings: PCI: qcom,pcie-sm8150: Move SM8150 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-4-28c1f11599fe@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea55160140 upstream.
Commit c007a55055 ("dt-bindings: PCI: qcom,pcie-sc8280xp: Move
SC8280XP to dedicated schema") move the device schema to separate file,
but it missed a "if:not:...then:" clause in the original binding which
was requiring power-domains and resets for this particular chip.
Fixes: c007a55055 ("dt-bindings: PCI: qcom,pcie-sc8280xp: Move SC8280XP to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-3-28c1f11599fe@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef99c2efea upstream.
Commit 756485bfbb ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to
dedicated schema") move the device schema to separate file, but it
missed a "if:not:...then:" clause in the original binding which was
requiring power-domains and resets for this particular chip.
Fixes: 756485bfbb ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030-dt-bindings-pci-qcom-fixes-power-domains-v2-2-28c1f11599fe@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d4e746aa9 upstream.
Fix below warnings generated dt_bindings_check for examples in the
bindings.
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): 'audio-codec@1,0' does not match
any of the regexes: '^pinctrl-[0-9]+$', '^slim@[0-9a-f]+$'
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): #address-cells: 1 was expected
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): 'dmas' is a required property
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Documentation/devicetree/bindings/slimbus/slimbus.example.dtb:
slim@28080000 (qcom,slim-ngd-v1.5.0): 'dma-names' is a required
property
from schema $id:
http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
Fixes: 7cbba32a2d ("slimbus: qcom: remove unused qcom controller driver")
Cc: stable <stable@kernel.org>
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20251114110505.143105-1-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed724ea1b8 upstream.
Enable use of common SDHCI-related properties such as sdhci-caps-mask as
found in the AST2600 EVB DTS.
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4813dea9e2 ]
Binding incorrectly specifies the 'DBI' region as 'ELBI'. DBI is a must
have region for DWC controllers as it has the Root Port and controller
specific registers, while ELBI has optional registers.
Hence, fix the binding. Though this is an ABI break, this change is needed
to accurately describe the PCI memory map.
Fixes: 7cd2103911 ("dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251101-pci-meson-fix-v1-1-c50dcc56ed6a@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a6cdfd69ad upstream.
Drop "uart-has-rtscts: false" from binding as the IP supports hardware
flow control on all SoCs.
Cc: stable@kernel.org
Fixes: 25422e8f46 ("dt-bindings: serial: Add compatible for Renesas RZ/T2H SoC in sci")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114101350.106699-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix register naming in the Mediatek mt8189 driver.
- Select REGMAP_MMIO for the Realtek RTD driver.
- Fix the number of items in groups in the Toshiba
Visconti driver.
- Fix a memory leak in the Cirrus CS42L43 driver.
- Fix a deadlock (!) in Qualcomm pinmux configuration.
- Fix use of uninitialized memory and list initialization
in the S32CC pin controller.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmkgkXUACgkQQRCzN7AZ
XXNxZxAAn7JgQd+ec2G8NtCXDd9CklEgnj8nrAp5k2DxdIfgmumrUWnuk0sFg5gR
r9bHZXTucbFEhSXzZklMsYY3fIBDAFc4pcZe3+T3dwvLuP9eNT9WAKCxKrZol8b4
5x/D6nqfOMbYPBGwoR/tK1QUbbWxyC/LgjgUXr7GV5jKFZSDponWqOE50JdG3g8K
ykJZFTZb++NLoBCW5IKPoKR+p2z5eyO0oiSrsgsFJvHsNy3ID6/L1lab9udJ1VdD
TNLtnGuB3FEpUOUycx/Y4OyuMoVe2ySr2mqsSAVEWXB8+reAIZF3v5Y1uYYkn7j3
TwJ4qUTm7DtOlcCuH0GfyPuA0NLwFteTBVQl1w43i2Zcuy2prpZ0sYjMLPmwZTbX
YiZgjo7lz2CxhGKkhOlcgrvxhoembEhD9Z8YL7CLn04dykjjnzTD7O1Hr2NA+ZwD
ttbc5+2adyfaewIbo1zJNwP81x1wBVzPCDQVS+/h4lQB5AAxZpcYC8pz/zx84fTO
Qg+nRk9hSjWjGqi9JGpsJRtNR04Q58qThDg3xuumq+17TtYUPTE7BCzpuV2jyodE
UV1cHwjULp9e/f3dumDG15V733xUUtHEGNkk9AFD+F5X+QtChK1uDSbYlybsr/qc
UbhoYHA+jQz5L3I4MIuU41ekVdVYlH5PKzDI5jTJOQUra9M/sag=
=dfY2
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix register naming in the Mediatek mt8189 driver
- Select REGMAP_MMIO for the Realtek RTD driver
- Fix the number of items in groups in the Toshiba Visconti driver
- Fix a memory leak in the Cirrus CS42L43 driver
- Fix a deadlock (!) in Qualcomm pinmux configuration
- Fix use of uninitialized memory and list initialization in the S32CC
pin controller
* tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: xlnx,versal-pinctrl: Add missing unevaluatedProperties on '^conf' nodes
pinctrl: s32cc: initialize gpio_pin_config::list after kmalloc()
pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc
pinctrl: qcom: msm: Fix deadlock in pinmux configuration
pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()
dt-bindings: pinctrl: toshiba,visconti: Fix number of items in groups
pinctrl: realtek: Select REGMAP_MMIO for RTD driver
pinctrl: mediatek: mt8189: align register base names to dt-bindings ones
pinctrl: mediatek: mt8196: align register base names to dt-bindings ones
Add the missing unevaluatedProperties to disallow extra properties on
the '^conf' nodes.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The $id for a binding should match its file path. The ti,twl4030-gpio
binding is located in the gpio/ subdirectory but was missing this from
its $id.
Correct the path to follow the standard convention.
Fixes: 842dcff8e2 ("dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Fixes: 842dcff8e2 ("dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema")
Link: https://lore.kernel.org/r/20250821194710.16043-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
A collection of small fixes. It became slightly bigger than usual
due to timing issues (holidays, etc), but all changes are rather
device-specific fixes, so not really worrisome.
- ASoC Cirrus codec fixes for AMD
- Various fixes for ASoC Intel AVS, Qualcomm, SoundWire, FSL,
Mediatek, Renesas,
- A few HD-audio quirks, and USB-audio regression fixes for Presonus
-----BEGIN PGP SIGNATURE-----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=8X1t
-----END PGP SIGNATURE-----
Merge tag 'sound-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. It became slightly bigger than usual due
to timing issues (holidays, etc), but all changes are rather
device-specific fixes, so not really worrisome.
- ASoC Cirrus codec fixes for AMD
- Various fixes for ASoC Intel AVS, Qualcomm, SoundWire, FSL,
Mediatek, Renesas
- A few HD-audio quirks, and USB-audio regression fixes for Presonus"
* tag 'sound-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda/realtek: Enable mic on Vaio RPL
ASoC: dt-bindings: pm4125-sdw: correct number of soundwire ports
ASoC: renesas: rz-ssi: Use proper dma_buffer_pos after resume
ASoC: soc_sdw_utils: remove cs42l43 component_name
ASoC: fsl_sai: Fix sync error in consumer mode
ASoC: Fix build for sdw_utils
ALSA: hda/realtek: Fix mute led for HP Victus 15-fa1xxx (MB 8C2D)
ASoC: rt721: fix prepare clock stop failed
ALSA: usb-audio: don't log messages meant for 1810c when initializing 1824c
ASoC: mediatek: Fix double pm_runtime_disable in remove functions
ASoC: fsl_micfil: correct the endian format for DSD
ASoC: fsl_sai: fix bit order for DSD format
ASoC: Intel: avs: Use snd_codec format when initializing probe
ASoC: Intel: avs: Disable periods-elapsed work when closing PCM
ASoC: Intel: avs: Unprepare a stream when XRUN occurs
ASoC: sdw_utils: add name_prefix for rt1321 part id
ASoC: qdsp6: q6asm: do not sleep while atomic
ASoC: Intel: soc-acpi-intel-ptl-match: Remove cs42l43 match from sdw link3
ASOC: max98090/91: fix for filter configuration: AHPF removed DMIC2_HPF added
ASoC: amd: acp: Add ACP7.0 match entries for cs35l56 and cs42l43
...
For some reason we ended up limiting the number of soundwire ports to 2
in the bindings, the actual codec supports 4 rx and 5 tx ports.
Fixes: 88d0d17192 ("ASoC: dt-bindings: add bindings for pm4125 audio codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251029144636.357203-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 267bca002c ("dt-bindings: net: sparx5: correct LAN969x register
space windows") said that LAN969x has exactly two address spaces ("reg"
property) but implemented it as 2 or more. Narrow the constraint to
properly express that only two items are allowed, which also matches
Linux driver.
Fixes: 267bca002c ("dt-bindings: net: sparx5: correct LAN969x register space windows")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251026101741.20507-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4mow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykXPACfVp7KKDyM+10AxrV/xccYT53iUaAAoMQEWvES
/0acQXalH6XunybjHkOd
=cBYS
-----END PGP SIGNATURE-----
Merge tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4nSw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yliXgCfZzBRNhHGVV0gQrBy2dz9owzfhLQAoISf3He8
dwzYP7TSYXungxfq9dSL
=NaGG
-----END PGP SIGNATURE-----
Merge tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
A moderately large collection of device specific changes here, mostly
fixes but also including a few new quirks and device IDs. This is all
fairly routine even for the affected devices.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmj7d0kACgkQJNaLcl1U
h9DNGgf+KWDwiPttn2gYGm4h5uEDix23aO7FOaRTAoFihWDaqvCz4V+wukRqdRE2
eyxfwQmupdQV+X+/a+ufBnQfHerHUjt2MUxZgBQTMgZ+JwFYVAtiyJszuCPw7LJH
h88UUIhQhkbtshDScNIzwTaEZ7ZMubULKIayxuweHIV0tToTrDpra5WQbMzApcyb
chvfY15sVncZizGxxgfdkFgK4MjKWzDzQNws4ik4XBq+aIX/AxgndoV8wgQW7pyq
CXNsYWE70J9n+pSqBFpSSlEYvOlx/Tca4s342rRZyY7lKZHwq3PkhhGqp4BsQcMj
t6+mpgdgmhQpT6fu42RxHM40y/XfWA==
=3b9V
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A moderately large collection of device specific changes here, mostly
fixes but also including a few new quirks and device IDs. This is all
fairly routine even for the affected devices"
* tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: spi-rockchip: Add RK3506 compatible
spi: intel-pci: Add support for Intel Wildcat Lake SPI serial flash
spi: intel-pci: Add support for Arrow Lake-H SPI serial flash
spi: intel: Add support for 128M component density
spi: airoha: fix reading/writing of flashes with more than one plane per lun
spi: airoha: switch back to non-dma mode in the case of error
spi: airoha: add support of dual/quad wires spi modes to exec_op() handler
spi: airoha: return an error for continuous mode dirmap creation cases
spi: amlogic: fix spifc build error
spi: cadence-quadspi: Fix pm_runtime unbalance on dma EPROBE_DEFER
spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection
spi: spi-nxp-fspi: add extra delay after dll locked
spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate
spi: dw-mmio: add error handling for reset_control_deassert()
spi: rockchip-sfc: Fix DMA-API usage
spi: dt-bindings: cadence: add soc-specific compatible strings for zynqmp and versal-net
The "groups" property can hold multiple entries (e.g.
toshiba/tmpv7708-rm-mbrc.dts file), so allow that by dropping incorrect
type (pinmux-node.yaml schema already defines that as string-array) and
adding constraints for items. This fixes dtbs_check warnings like:
toshiba/tmpv7708-rm-mbrc.dtb: pinctrl@24190000 (toshiba,tmpv7708-pinctrl):
pwm-pins:groups: ['pwm0_gpio16_grp', 'pwm1_gpio17_grp', 'pwm2_gpio18_grp', 'pwm3_gpio19_grp'] is too long
Fixes: 1825c1fe00 ("pinctrl: Add DT bindings for Toshiba Visconti TMPV7700 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
All driver fixes. The big change is the storvsc one to rejig the
hyper-v channel handling to be more efficient for SMP virtual
machines.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaPkVaxsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIViLgD+L8yF/GV9a3JzXbdaM24RzhgR9c4exIrG
XlHyqBIl6nAA/0Vj2vNNRNMGe0NCJJ7qyWFfH9ecYrqASa+9NQnjBfL8
=8LEK
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All driver fixes. The big change is the storvsc one to rejig the
hyper-v channel handling to be more efficient for SMP virtual
machines"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Kaanapali
scsi: ufs: qcom: dt-bindings: Document the Kaanapali UFS controller
scsi: libfc: Prevent integer overflow in fc_fcp_recv_data()
scsi: qla4xxx: Fix typos in comments
scsi: storvsc: Prefer returning channel with the same CPU as on the I/O issuing CPU
The SPI controller found in the RK3506 SoC is still compatible to the
original one introduced with the RK3066, so add the RK3506 compatible
to the list of its variants.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251022004200.204276-1-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The SCIF instances on R-Car Gen5 have a single interrupt, just like on
other R-Car SoCs.
Fixes: 6ac1d60473 ("dt-bindings: serial: sh-sci: Document r8a78000 bindings")
Cc: stable <stable@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/09bc9881b31bdb948ce8b69a2b5acf633f5505a4.1759920441.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A collection of small fixes. All changes are rather boring
device-specific fixes and quirks.
- A few fixes for missing NULL checks
- ASoC NAU8821 fixes for jack and irq handling
- Various fixes for ASoC TAS2781, IDT821034, sc8280xp, max9809x,
wcd938x, and SoundWire
- Usual HD-audio and USB-audio quirks
-----BEGIN PGP SIGNATURE-----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=9RjP
-----END PGP SIGNATURE-----
Merge tag 'sound-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are rather boring
device-specific fixes and quirks:
- A few fixes for missing NULL checks
- ASoC NAU8821 fixes for jack and irq handling
- Various fixes for ASoC TAS2781, IDT821034, sc8280xp, max9809x,
wcd938x, and SoundWire
- Usual HD-audio and USB-audio quirks"
* tag 'sound-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ALSA: hda/realtek: Fix mute led for HP Omen 17-cb0xxx
ALSA: usb-audio: fix vendor quirk for Logitech H390
ALSA: usb-audio: add volume quirks for MS LifeChat LX-3000
ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails
ASoC: max98090/91: fixed max98091 ALSA widget powering up/down
ASoC: dt-bindings: Add compatible string fsl,imx-audio-tlv320
ASoC: codecs: wcd938x-sdw: remove redundant runtime pm calls
ASoC: sdw_utils: add rt1321 part id to codec_info_list
ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card
ALSA: firewire: amdtp-stream: fix enum kernel-doc warnings
ALSA: usb-audio: add mixer_playback_min_mute quirk for Logitech H390
ASoC: nau8821: Avoid unnecessary blocking in IRQ handler
ASoC: nau8821: Add DMI quirk to bypass jack debounce circuit
ASoC: nau8821: Consistently clear interrupts before unmasking
ASoC: nau8821: Generalize helper to clear IRQ status
ASoC: nau8821: Cancel jdet_work before handling jack ejection
ASoC: codecs: Fix gain setting ranges for Renesas IDT821034 codec
ASoC: tas2781: Update ti,tas2781.yaml for adding tas58xx
ASoC: tas2781: Support more newly-released amplifiers tas58xx in the driver
ASoC: qcom: sc8280xp: Add support for QCS615
...
Merge series from Le Qi <le.qi@oss.qualcomm.com>:
This patch series adds support for the QCS615 sound card:
- Updates device tree bindings for SM8250 to include QCS615.
- Adds QCS615 support in the SC8280XP ASoC driver.
Add compatible string fsl,imx-audio-tlv320 to fix below CHECK_DTBS warning:
arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dtb: /sound: failed to match any schema with compatible: ['fsl,imx-audio-tlv320']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251010160321.2130093-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for QCS615 sound card, which looks fully
compatible with existing SM8250.
Signed-off-by: Le Qi <le.qi@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251009090619.1097388-2-le.qi@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing multiport controller binding to target list.
Fix minItems for interrupt-names to avoid the following error on High
Speed controller:
usb@a200000: interrupt-names: ['dwc_usb3', 'pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
Fixes: 6e762f7b8e ("dt-bindings: usb: Introduce qcom,snps-dwc3")
Cc: stable@vger.kernel.org
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ports definition currently defined in the usb-switch.yaml
fits standards devices which are either recipient of altmode
muxing and orientation switching events or an element of the
USB Super Speed data lanes.
This doesn't necessarely fit combo PHYs like the Qualcomm
USB3/DP Combo which has a different ports representation.
Move the ports definition to a separate usb-switch-ports.yaml
and reference it next to the usb-switch.yaml, except for
the Qualcomm USB3/DP Combo PHY bindings.
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/175462129176.394940.16810637795278334342.robh@kernel.org/
Fixes: 3bad7fe227 ("dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only i.MX8MP need dma-range property to let USB controller work properly.
Remove dma-range from required list and add limitation for imx8mp.
Fixes: d2a704e297 ("dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings")
Cc: stable <stable@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Allow child nodes on renesas-bsc bus binding
- Drop node name pattern on allwinner,sun50i-a64-de2 bus binding
- Switch DT patchwork to kernel.org from ozlabs.org
- Fix some typos in docs and bindings
- Fix reference count in PCI node unittest
-----BEGIN PGP SIGNATURE-----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=7vRd
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Allow child nodes on renesas-bsc bus binding
- Drop node name pattern on allwinner,sun50i-a64-de2 bus binding
- Switch DT patchwork to kernel.org from ozlabs.org
- Fix some typos in docs and bindings
- Fix reference count in PCI node unittest
* tag 'devicetree-fixes-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: bus: renesas-bsc: allow additional properties
dt-bindings: bus: allwinner,sun50i-a64-de2: don't check node names
MAINTAINERS: Move DT patchwork to kernel.org
of: unittest: Fix device reference count leak in of_unittest_pci_node_verify
of: doc: Fix typo in doc comments.
dt-bindings: mmc: Correct typo "upto" to "up to"
Allow additional properties to enable devices attached to the bus.
Fixes warnings like these:
arch/arm/boot/dts/renesas/sh73a0-kzm9g.dtb: bus@fec10000 (renesas,bsc-sh73a0): Unevaluated properties are not allowed ('ethernet@10000000' was unexpected)
arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dtb: bus@fec10000 (renesas,bsc-r8a73a4): Unevaluated properties are not allowed ('ethernet@8000000', 'flash@0' were unexpected)
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Node names are already and properly checked by the core schema. No need
to do it again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[robh: Also drop [A-F] in unit address]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
- Second part of rtl9300 updates since dependencies are in now
- general cleanups, implemented block read/write support, added RTL9310 support
- DT schema conversion of hix5hd2 binding
- namespace cleanup for i2c-algo-pca
- minor simplification for mt65xx
-----BEGIN PGP SIGNATURE-----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=4NUB
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- Second part of rtl9300 updates since dependencies are in now:
- general cleanups
- implement block read/write support
- add RTL9310 support
- DT schema conversion of hix5hd2 binding
- namespace cleanup for i2c-algo-pca
- minor simplification for mt65xx
* tag 'i2c-for-6.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: hisilicon,hix5hd2: convert to DT schema
i2c: mt65xx: convert set_speed function to void
i2c: rename wait_for_completion callback to wait_for_completion_cb
i2c: rtl9300: add support for RTL9310 I2C controller
dt-bindings: i2c: realtek,rtl9301-i2c: extend for RTL9310 support
i2c: rtl9300: use scoped guard instead of explicit lock/unlock
i2c: rtl9300: separate xfer configuration and execution
i2c: rtl9300: do not set read mode on every transfer
i2c: rtl9300: move setting SCL frequency to config_io
i2c: rtl9300: rename internal sda_pin to sda_num
dt-bindings: i2c: realtek,rtl9301-i2c: fix wording and typos
i2c: rtl9300: use regmap fields and API for registers
i2c: rtl9300: Implement I2C block read and write
Convert the Devicetree binding documentation for hisilicon,hix5hd2-i2c
from plain text to DT binding schema.
Signed-off-by: Kael D'Alcamo <dev@kael-k.io>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
- a number of conversions to yaml/json schema and fixes for
input-related device tree bindings
- a new driver for Awinic AW86927 haptic chip
- a new driver for Hynitron CST816x series controller
- a new driver for add Himax HX852x(ES) touchscreen controller
- a fix to uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- a fix to prevent overflow in pressure calculation in tsc2007 driver
causing phantom touches
- a change to Atmel maxTouch driver to support generic touchscreen
configuration (flip, rotate, etc.)
- support for platform data was dropped in tca8418_keypad,
pxa27x-keypad, spear-keyboard and twl4030_keypad drivers, they all
now rely on generic device properties for configuration
- other assorted changes and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaOX1HQAKCRBAj56VGEWX
nC29AQCsDm6HBKXJZl6nAI8WHQiSvASFvyFlF6scVnfueX54mQEA6eE428+Cr1Sn
mDiwL38Es+PlZbdsi0J2q0vYzpr4yQU=
=JZIn
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Conversions to yaml/json schema and fixes for input-related device
tree bindings
- New drivers:
- Awinic AW86927 haptic chip
- Hynitron CST816x series controller
- Himax HX852x(ES) touchscreen controller
- Fix uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- Prevent overflow in pressure calculation in tsc2007 driver causing
phantom touches
- Make the Atmel maxTouch driver support generic touchscreen
configuration (flip, rotate, etc)
- Drop support for platform data in tca8418_keypad, pxa27x-keypad,
spear-keyboard and twl4030_keypad drivers, they all now rely on
generic device properties for configuration
- Other assorted changes and fixes
* tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: atmel_mxt_ts - allow reset GPIO to sleep
Input: aw86927 - fix error code in probe()
Input: psxpad-spi - add a check for the return value of spi_setup()
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Input: aw86927 - add driver for Awinic AW86927
dt-bindings: input: Add Awinic AW86927
dt-bindings: touchscreen: remove touchscreen.txt
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node
dt-bindings: touchscreen: convert eeti bindings to json schema
Input: pm8941-pwrkey - disable wakeup for resin by default
dt-bindings: input: pm8941-pwrkey: Document wakeup-source property
Input: add driver for Hynitron CST816x series
dt-bindings: input: touchscreen: add hynitron cst816x series
Input: imx6ul_tsc - set glitch threshold by DTS property
dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold
dt-bindings: touchscreen: add debounce-delay-us property
Input: ps2-gpio - fix typo
Input: atmel_mxt_ts - add support for generic touchscreen configurations
dt-bindings: input: maxtouch: add common touchscreen properties
dt-bindings: touchscreen: convert zet6223 bindings to json schema
...
struct clk_ops::determine_rate() instead of the round_rate() one so that we can
remove the round_rate clk_op entirely. Brian has taken up that task which
nobody else has wanted to do for close to a decade. Thanks Brian! This is all
prerequisite work to get to the real task of improving the clk rate setting
process. Once we have determine_rate() used everywhere, we'll be able to do
things like chain the rate request structs in linked lists to order the rate
setting operations or add more parameters without having to change every clk
driver in existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad this is
getting done.
Beyond this change we also have a tweak to the clk_lookup() function in the
core framework to use hashing on the clk name instead of a clk tree walk with
string comparisons. We _still_ rely on the clk name to be unique, because
historically we've used globally unique strings to describe the clk tree
topology. This tree walk becomes increasingly slow as more clks are added to
the system. Searching from the roots for a duplicate is simple but pretty dumb
and it wastes boot time so we're using a hash table as an improvement. Ideally
we wouldn't rely on the strings to be unique at all, relegating them to simply
debug information, but that is future work that will likely require some sort
of Kconfig knob indicating strings aren't used for topology description.
Outside of the core framework changes we have the usual new SoC support and
fixes to clk drivers for things that were discovered once the clks were used by
consumer drivers. Nothing in particular is jumping out at me in the "misc"
pile, except maybe the Amlogic driver that has gone through a refactoring. That
series got a fix from testing in -next though so it seems likely that things
have been getting good test coverage for a couple weeks already.
-----BEGIN PGP SIGNATURE-----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=fjY4
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's a bunch of patches here across drivers/clk/ to migrate drivers
to use struct clk_ops::determine_rate() instead of the round_rate()
one so that we can remove the round_rate clk_op entirely. Brian has
taken up that task which nobody else has wanted to do for close to a
decade. Thanks Brian!
This is all prerequisite work to get to the real task of improving the
clk rate setting process. Once we have determine_rate() used
everywhere, we'll be able to do things like chain the rate request
structs in linked lists to order the rate setting operations or add
more parameters without having to change every clk driver in
existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad
this is getting done.
Beyond this change we also have a tweak to the clk_lookup() function
in the core framework to use hashing on the clk name instead of a clk
tree walk with string comparisons. We _still_ rely on the clk name to
be unique, because historically we've used globally unique strings to
describe the clk tree topology. This tree walk becomes increasingly
slow as more clks are added to the system. Searching from the roots
for a duplicate is simple but pretty dumb and it wastes boot time so
we're using a hash table as an improvement. Ideally we wouldn't rely
on the strings to be unique at all, relegating them to simply debug
information, but that is future work that will likely require some
sort of Kconfig knob indicating strings aren't used for topology
description.
Outside of the core framework changes we have the usual new SoC
support and fixes to clk drivers for things that were discovered once
the clks were used by consumer drivers. Nothing in particular is
jumping out at me in the "misc" pile, except maybe the Amlogic driver
that has gone through a refactoring. That series got a fix from
testing in -next though so it seems likely that things have been
getting good test coverage for a couple weeks already"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
reset: aspeed: register AST2700 reset auxiliary bus device
dt-bindings: clock: ast2700: modify soc0/1 clock define
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
...
