mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
28,022 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Nathan Chancellor
|
861aa1be41 |
kbuild: Split .modinfo out from ELF_DETAILS
commit |
||
Guangshuo Li
|
9b85c8f624 |
powerpc/smp: Add check for kcalloc() failure in parse_thread_groups()
[ Upstream commit |
||
Nam Cao
|
e28f451025 |
powerpc/pseries: Fix MSI-X allocation failure when quota is exceeded
[ Upstream commit |
||
Petr Mladek
|
34de49d097 |
kallsyms/bpf: rename __bpf_address_lookup() to bpf_address_lookup()
[ Upstream commit |
||
Narayana Murty N
|
6e6561231c |
powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling
[ Upstream commit |
||
Christophe Leroy
|
1b39dbd776 |
powerpc/uaccess: Move barrier_nospec() out of allow_read_{from/write}_user()
[ Upstream commit |
||
David Hildenbrand
|
8fb48de871 |
powerpc/pseries/cmm: call balloon_devinfo_init() also without CONFIG_BALLOON_COMPACTION
commit |
||
|
David Hildenbrand
|
40a2a25aff |
powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages
commit |
||
Donet Tom
|
4ae1e46d8a |
powerpc/64s/slb: Fix SLB multihit issue during SLB preload
commit |
||
Dave Vasilevsky
|
96bdd7ba17 |
powerpc, mm: Fix mprotect on book3s 32-bit
commit |
||
Jan Stancek
|
26cca984de |
powerpc/tools: drop -o pipefail in gcc check scripts
[ Upstream commit |
||
Nysal Jan K.A.
|
0d5c9e901a |
powerpc/kexec: Enable SMT before waking offline CPUs
commit |
||
Finn Thain
|
b3b320a900 |
powerpc: Add reloc_offset() to font bitmap pointer used for bootx_printf()
commit |
||
Sourabh Jain
|
d519d23a6b |
crash: let architecture decide crash memory export to iomem_resource
commit |
||
Ben Collins
|
095704d7f3 |
powerpc/addnote: Fix overflow on 32-bit builds
[ Upstream commit
|
||
Ritesh Harjani (IBM)
|
6b405443b6 |
powerpc/64s/ptdump: Fix kernel_hash_pagetable dump for ISA v3.00 HPTE format
[ Upstream commit |
||
|
Ritesh Harjani (IBM)
|
1fcbf18558 |
powerpc/64s/hash: Restrict stress_hpt_struct memblock region to within RMA limit
[ Upstream commit |
||
|
Christophe Leroy
|
74e9f302f3 |
powerpc/32: Fix unpaired stwcx. on interrupt exit
[ Upstream commit |
||
|
Sourabh Jain
|
f834bd9fb8 |
powerpc/kdump: Fix size calculation for hot-removed memory ranges
[ Upstream commit |
||
David Hildenbrand (Red Hat)
|
39231e8d6b |
mm: fix MAX_FOLIO_ORDER on powerpc configs with hugetlb
In the past, CONFIG_ARCH_HAS_GIGANTIC_PAGE indicated that we support runtime allocation of gigantic hugetlb folios. In the meantime it evolved into a generic way for the architecture to state that it supports gigantic hugetlb folios. In commit |
||
|
Sourabh Jain
|
0843ba4584 |
powerpc/fadump: skip parameter area allocation when fadump is disabled
Fadump allocates memory to pass additional kernel command-line argument to the fadump kernel. However, this allocation is not needed when fadump is disabled. So avoid allocating memory for the additional parameter area in such cases. Fixes: |
||
|
Nam Cao
|
2743cf75f7 |
powerpc, ocxl: Fix extraction of struct xive_irq_data
Commit |
||
|
Nam Cao
|
ef3e73a917 |
powerpc/pseries/msi: Fix NULL pointer dereference at irq domain teardown
pseries_msi_ops_teardown() reads pci_dev* from msi_alloc_info_t. However, pseries_msi_ops_prepare() does not populate this structure, thus it is all zeros. Consequently, pseries_msi_ops_teardown() triggers a NULL pointer dereference crash. struct pci_dev is available in struct irq_domain. Read it there instead. Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Closes: https://lore.kernel.org/linuxppc-dev/878d7651-433a-46fe-a28b-1b7e893fcbe0@linux.ibm.com/ Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20251010120307.3281720-1-namcao@linutronix.de |
||
Linus Torvalds
|
256e341706 |
Generic:
* Rework almost all of KVM's exports to expose symbols only to KVM's x86
vendor modules (kvm-{amd,intel}.ko and PPC's kvm-{pr,hv}.ko.
x86:
* Rework almost all of KVM x86's exports to expose symbols only to KVM's
vendor modules, i.e. to kvm-{amd,intel}.ko.
* Add support for virtualizing Control-flow Enforcement Technology (CET) on
Intel (Shadow Stacks and Indirect Branch Tracking) and AMD (Shadow Stacks).
It's worth noting that while SHSTK and IBT can be enabled separately in CPUID,
it is not really possible to virtualize them separately. Therefore, Intel
processors will really allow both SHSTK and IBT under the hood if either is
made visible in the guest's CPUID. The alternative would be to intercept
XSAVES/XRSTORS, which is not feasible for performance reasons.
* Fix a variety of fuzzing WARNs all caused by checking L1 intercepts when
completing userspace I/O. KVM has already committed to allowing L2 to
to perform I/O at that point.
* Emulate PERF_CNTR_GLOBAL_STATUS_SET for PerfMonV2 guests, as the MSR is
supposed to exist for v2 PMUs.
* Allow Centaur CPU leaves (base 0xC000_0000) for Zhaoxin CPUs.
* Add support for the immediate forms of RDMSR and WRMSRNS, sans full
emulator support (KVM should never need to emulate the MSRs outside of
forced emulation and other contrived testing scenarios).
* Clean up the MSR APIs in preparation for CET and FRED virtualization, as
well as mediated vPMU support.
* Clean up a pile of PMU code in anticipation of adding support for mediated
vPMUs.
* Reject in-kernel IOAPIC/PIT for TDX VMs, as KVM can't obtain EOI vmexits
needed to faithfully emulate an I/O APIC for such guests.
* Many cleanups and minor fixes.
* Recover possible NX huge pages within the TDP MMU under read lock to
reduce guest jitter when restoring NX huge pages.
* Return -EAGAIN during prefault if userspace concurrently deletes/moves the
relevant memslot, to fix an issue where prefaulting could deadlock with the
memslot update.
x86 (AMD):
* Enable AVIC by default for Zen4+ if x2AVIC (and other prereqs) is supported.
* Require a minimum GHCB version of 2 when starting SEV-SNP guests via
KVM_SEV_INIT2 so that invalid GHCB versions result in immediate errors
instead of latent guest failures.
* Add support for SEV-SNP's CipherText Hiding, an opt-in feature that prevents
unauthorized CPU accesses from reading the ciphertext of SNP guest private
memory, e.g. to attempt an offline attack. This feature splits the shared
SEV-ES/SEV-SNP ASID space into separate ranges for SEV-ES and SEV-SNP guests,
therefore a new module parameter is needed to control the number of ASIDs
that can be used for VMs with CipherText Hiding vs. how many can be used to
run SEV-ES guests.
* Add support for Secure TSC for SEV-SNP guests, which prevents the untrusted
host from tampering with the guest's TSC frequency, while still allowing the
the VMM to configure the guest's TSC frequency prior to launch.
* Validate the XCR0 provided by the guest (via the GHCB) to avoid bugs
resulting from bogus XCR0 values.
* Save an SEV guest's policy if and only if LAUNCH_START fully succeeds to
avoid leaving behind stale state (thankfully not consumed in KVM).
* Explicitly reject non-positive effective lengths during SNP's LAUNCH_UPDATE
instead of subtly relying on guest_memfd to deal with them.
* Reload the pre-VMRUN TSC_AUX on #VMEXIT for SEV-ES guests, not the host's
desired TSC_AUX, to fix a bug where KVM was keeping a different vCPU's
TSC_AUX in the host MSR until return to userspace.
KVM (Intel):
* Preparation for FRED support.
* Don't retry in TDX's anti-zero-step mitigation if the target memslot is
invalid, i.e. is being deleted or moved, to fix a deadlock scenario similar
to the aforementioned prefaulting case.
* Misc bugfixes and minor cleanups.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmjjx/0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMLFwf9HXZdqBn6VvkbSL/HIGdNG1BEzeJ0
MQVEMMdmWJ72JtI6soJ6oN5NWTIJJeMTPuCgRrNxFbIivSdm9vYPTSCNwNBhKb+H
FEsr62a9T4XgnTqy20h+yZJiKNvwtaggdTWFnUAUqsBSFkEtksAP72odvZx+GNv/
cndqtxy/84TcJ4ZXFdxElylCcQ9xRoRkqkU8KaVfg88wqMIMbSR3OBSH/g8bqR+3
cjvDGNC7TPHPEN2Wmq2AYluRlBxB2ZhsOauArsdidPXHAevO+AFnbS27fz6bixZK
LTS/qwKOsvhFzyHngemuG6s6HgkgBEshfcKk5i7d2ReRjaGP4EvkhmlImA==
=k49c
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull x86 kvm updates from Paolo Bonzini:
"Generic:
- Rework almost all of KVM's exports to expose symbols only to KVM's
x86 vendor modules (kvm-{amd,intel}.ko and PPC's kvm-{pr,hv}.ko
x86:
- Rework almost all of KVM x86's exports to expose symbols only to
KVM's vendor modules, i.e. to kvm-{amd,intel}.ko
- Add support for virtualizing Control-flow Enforcement Technology
(CET) on Intel (Shadow Stacks and Indirect Branch Tracking) and AMD
(Shadow Stacks).
It is worth noting that while SHSTK and IBT can be enabled
separately in CPUID, it is not really possible to virtualize them
separately. Therefore, Intel processors will really allow both
SHSTK and IBT under the hood if either is made visible in the
guest's CPUID. The alternative would be to intercept
XSAVES/XRSTORS, which is not feasible for performance reasons
- Fix a variety of fuzzing WARNs all caused by checking L1 intercepts
when completing userspace I/O. KVM has already committed to
allowing L2 to to perform I/O at that point
- Emulate PERF_CNTR_GLOBAL_STATUS_SET for PerfMonV2 guests, as the
MSR is supposed to exist for v2 PMUs
- Allow Centaur CPU leaves (base 0xC000_0000) for Zhaoxin CPUs
- Add support for the immediate forms of RDMSR and WRMSRNS, sans full
emulator support (KVM should never need to emulate the MSRs outside
of forced emulation and other contrived testing scenarios)
- Clean up the MSR APIs in preparation for CET and FRED
virtualization, as well as mediated vPMU support
- Clean up a pile of PMU code in anticipation of adding support for
mediated vPMUs
- Reject in-kernel IOAPIC/PIT for TDX VMs, as KVM can't obtain EOI
vmexits needed to faithfully emulate an I/O APIC for such guests
- Many cleanups and minor fixes
- Recover possible NX huge pages within the TDP MMU under read lock
to reduce guest jitter when restoring NX huge pages
- Return -EAGAIN during prefault if userspace concurrently
deletes/moves the relevant memslot, to fix an issue where
prefaulting could deadlock with the memslot update
x86 (AMD):
- Enable AVIC by default for Zen4+ if x2AVIC (and other prereqs) is
supported
- Require a minimum GHCB version of 2 when starting SEV-SNP guests
via KVM_SEV_INIT2 so that invalid GHCB versions result in immediate
errors instead of latent guest failures
- Add support for SEV-SNP's CipherText Hiding, an opt-in feature that
prevents unauthorized CPU accesses from reading the ciphertext of
SNP guest private memory, e.g. to attempt an offline attack. This
feature splits the shared SEV-ES/SEV-SNP ASID space into separate
ranges for SEV-ES and SEV-SNP guests, therefore a new module
parameter is needed to control the number of ASIDs that can be used
for VMs with CipherText Hiding vs. how many can be used to run
SEV-ES guests
- Add support for Secure TSC for SEV-SNP guests, which prevents the
untrusted host from tampering with the guest's TSC frequency, while
still allowing the the VMM to configure the guest's TSC frequency
prior to launch
- Validate the XCR0 provided by the guest (via the GHCB) to avoid
bugs resulting from bogus XCR0 values
- Save an SEV guest's policy if and only if LAUNCH_START fully
succeeds to avoid leaving behind stale state (thankfully not
consumed in KVM)
- Explicitly reject non-positive effective lengths during SNP's
LAUNCH_UPDATE instead of subtly relying on guest_memfd to deal with
them
- Reload the pre-VMRUN TSC_AUX on #VMEXIT for SEV-ES guests, not the
host's desired TSC_AUX, to fix a bug where KVM was keeping a
different vCPU's TSC_AUX in the host MSR until return to userspace
KVM (Intel):
- Preparation for FRED support
- Don't retry in TDX's anti-zero-step mitigation if the target
memslot is invalid, i.e. is being deleted or moved, to fix a
deadlock scenario similar to the aforementioned prefaulting case
- Misc bugfixes and minor cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (142 commits)
KVM: x86: Export KVM-internal symbols for sub-modules only
KVM: x86: Drop pointless exports of kvm_arch_xxx() hooks
KVM: x86: Move kvm_intr_is_single_vcpu() to lapic.c
KVM: Export KVM-internal symbols for sub-modules only
KVM: s390/vfio-ap: Use kvm_is_gpa_in_memslot() instead of open coded equivalent
KVM: VMX: Make CR4.CET a guest owned bit
KVM: selftests: Verify MSRs are (not) in save/restore list when (un)supported
KVM: selftests: Add coverage for KVM-defined registers in MSRs test
KVM: selftests: Add KVM_{G,S}ET_ONE_REG coverage to MSRs test
KVM: selftests: Extend MSRs test to validate vCPUs without supported features
KVM: selftests: Add support for MSR_IA32_{S,U}_CET to MSRs test
KVM: selftests: Add an MSR test to exercise guest/host and read/write
KVM: x86: Define AMD's #HV, #VC, and #SX exception vectors
KVM: x86: Define Control Protection Exception (#CP) vector
KVM: x86: Add human friendly formatting for #XM, and #VE
KVM: SVM: Enable shadow stack virtualization for SVM
KVM: SEV: Synchronize MSR_IA32_XSS from the GHCB when it's valid
KVM: SVM: Pass through shadow stack MSRs as appropriate
KVM: SVM: Update dump_vmcb with shadow stack save area additions
KVM: nSVM: Save/load CET Shadow Stack state to/from vmcb12/vmcb02
...
|
||
|
Linus Torvalds
|
2f2c725493 |
pci-v6.18-changes
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmjgOAkUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vxzlA//QxoUF4p1cN7+rPwuzCPNi2ZmKNyU
T7mLfUciV/t8nPLPFdtxdttHB3F+BsA/E9WYFiUUGBzvdYafnoZ/Qnio1WdMIIYz
0eVrTpnMUMBXrUwGFnnIER3b4GCJb2WR3RPfaBrbqQRHoAlDmv/ijh7rIKhgWIeR
NsCmPiFnsxPjgVusn2jXWLheUHEbZh2dVTk9lceQXFRdrUELC9wH7zigAA6GviGO
ssPC1pKfg5DrtuuM6k9JCcEYibQIlynxZ8sbT6YfQ2bs1uSEd2pEcr7AORb4l2yQ
rcirHwGTpvZ/QvzKpDY8FcuzPFRP7QPd+34zMEQ2OW04y1k61iKE/4EE2Z9w/OoW
esFQXbevy9P5JHu6DBcaJ2uwvnLiVesry+9CmkKCc6Dxyjbcbgeta1LR5dhn1Rv0
dMtRnkd/pxzIF5cRnu+WlOFV2aAw2gKL9pGuimH5TO4xL2qCZKak0hh8PAjUN2c/
12GAlrwAyBK1FeY2ZflTN7Vr8o2O0I6I6NeaF3sCW1VO2e6E9/bAIhrduUO4lhGq
BHTVRBefFRtbFVaxTlUAj+lSCyqES3Wzm8y/uLQvT6M3opunTziSDff1aWbm1Y2t
aASl1IByuKsGID8VrT5khHeBKSWtnd/v7LLUjCeq+g6eKdfN2arInPvw5X1NpVMj
tzzBYqwHgBoA4u8=
=BUw/
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
||
|
Linus Torvalds
|
a498d59c46 |
dma-mapping updates for Linux 6.18:
- refactoring of DMA mapping API to physical addresses as the primary interface instead of page+offset parameters; this gets much closer to Matthew Wilcox's long term wish for struct-pageless IO to cacheable DRAM and is supporting memdesc project which seeks to substantially transform how struct page works; an advantage of this approach is the possibility of introducing DMA_ATTR_MMIO, which covers existing 'dma_map_resource' flow in the common paths, what in turn lets to use recently introduced dma_iova_link() API to map PCI P2P MMIO without creating struct page; developped by Leon Romanovsky and Jason Gunthorpe - minor clean-up by Petr Tesarik and Qianfeng Rong -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaNugqAAKCRCJp1EFxbsS RBvDAQCEd4P6pz6ROQHf5BfiF5J1db2H6bWsFLjajx3KfNWf8gD+P0eQ0hTzLrcd zuSKZTivviOiyjXlt/9GOaXXPnmTwA0= =b0nZ -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.18-2025-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux Pull dma-mapping updates from Marek Szyprowski: - Refactoring of DMA mapping API to physical addresses as the primary interface instead of page+offset parameters This gets much closer to Matthew Wilcox's long term wish for struct-pageless IO to cacheable DRAM and is supporting memdesc project which seeks to substantially transform how struct page works. An advantage of this approach is the possibility of introducing DMA_ATTR_MMIO, which covers existing 'dma_map_resource' flow in the common paths, what in turn lets to use recently introduced dma_iova_link() API to map PCI P2P MMIO without creating struct page Developped by Leon Romanovsky and Jason Gunthorpe - Minor clean-up by Petr Tesarik and Qianfeng Rong * tag 'dma-mapping-6.18-2025-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: kmsan: fix missed kmsan_handle_dma() signature conversion mm/hmm: properly take MMIO path mm/hmm: migrate to physical address-based DMA mapping API dma-mapping: export new dma_*map_phys() interface xen: swiotlb: Open code map_resource callback dma-mapping: implement DMA_ATTR_MMIO for dma_(un)map_page_attrs() kmsan: convert kmsan_handle_dma to use physical addresses dma-mapping: convert dma_direct_*map_page to be phys_addr_t based iommu/dma: implement DMA_ATTR_MMIO for iommu_dma_(un)map_phys() iommu/dma: rename iommu_dma_*map_page to iommu_dma_*map_phys dma-mapping: rename trace_dma_*map_page to trace_dma_*map_phys dma-debug: refactor to use physical addresses for page mapping iommu/dma: implement DMA_ATTR_MMIO for dma_iova_link(). dma-mapping: introduce new DMA attribute to indicate MMIO memory swiotlb: Remove redundant __GFP_NOWARN dma-direct: clean up the logic in __dma_direct_alloc_pages() |
||
|
Linus Torvalds
|
8804d970fa |
Summary of significant series in this pull request:
- The 3 patch series "mm, swap: improve cluster scan strategy" from Kairui Song improves performance and reduces the failure rate of swap cluster allocation. - The 4 patch series "support large align and nid in Rust allocators" from Vitaly Wool permits Rust allocators to set NUMA node and large alignment when perforning slub and vmalloc reallocs. - The 2 patch series "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend DAMOS_STAT's handling of the DAMON operations sets for virtual address spaces for ops-level DAMOS filters. - The 3 patch series "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren Baghdasaryan reduces mmap_lock contention during reads of /proc/pid/maps. - The 2 patch series "mm/mincore: minor clean up for swap cache checking" from Kairui Song performs some cleanup in the swap code. - The 11 patch series "mm: vm_normal_page*() improvements" from David Hildenbrand provides code cleanup in the pagemap code. - The 5 patch series "add persistent huge zero folio support" from Pankaj Raghav provides a block layer speedup by optionalls making the huge_zero_pagepersistent, instead of releasing it when its refcount falls to zero. - The 3 patch series "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to the recently added Kexec Handover feature. - The 10 patch series "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo Stoakes turns mm_struct.flags into a bitmap. To end the constant struggle with space shortage on 32-bit conflicting with 64-bit's needs. - The 2 patch series "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap code. - The 7 patch series "selftests/mm: Fix false positives and skip unsupported tests" from Donet Tom fixes a few things in our selftests code. - The 7 patch series "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised" from David Hildenbrand "allows individual processes to opt-out of THP=always into THP=madvise, without affecting other workloads on the system". It's a long story - the [1/N] changelog spells out the considerations. - The 11 patch series "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on the memdesc project. Please see https://kernelnewbies.org/MatthewWilcox/Memdescs and https://blogs.oracle.com/linux/post/introducing-memdesc. - The 3 patch series "Tiny optimization for large read operations" from Chi Zhiling improves the efficiency of the pagecache read path. - The 5 patch series "Better split_huge_page_test result check" from Zi Yan improves our folio splitting selftest code. - The 2 patch series "test that rmap behaves as expected" from Wei Yang adds some rmap selftests. - The 3 patch series "remove write_cache_pages()" from Christoph Hellwig removes that function and converts its two remaining callers. - The 2 patch series "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD selftests issues. - The 3 patch series "introduce kernel file mapped folios" from Boris Burkov introduces the concept of "kernel file pages". Using these permits btrfs to account its metadata pages to the root cgroup, rather than to the cgroups of random inappropriate tasks. - The 2 patch series "mm/pageblock: improve readability of some pageblock handling" from Wei Yang provides some readability improvements to the page allocator code. - The 11 patch series "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON to understand arm32 highmem. - The 4 patch series "tools: testing: Use existing atomic.h for vma/maple tests" from Brendan Jackman performs some code cleanups and deduplication under tools/testing/. - The 2 patch series "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes a couple of 32-bit issues in tools/testing/radix-tree.c. - The 2 patch series "kasan: unify kasan_enabled() and remove arch-specific implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific initialization code into a common arch-neutral implementation. - The 3 patch series "mm: remove zpool" from Johannes Weiner removes zspool - an indirection layer which now only redirects to a single thing (zsmalloc). - The 2 patch series "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a couple of cleanups in the fork code. - The 37 patch series "mm: remove nth_page()" from David Hildenbrand makes rather a lot of adjustments at various nth_page() callsites, eventually permitting the removal of that undesirable helper function. - The 2 patch series "introduce kasan.write_only option in hw-tags" from Yeoreum Yun creates a KASAN read-only mode for ARM, using that architecture's memory tagging feature. It is felt that a read-only mode KASAN is suitable for use in production systems rather than debug-only. - The 3 patch series "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does some tidying in the hugetlb folio allocation code. - The 12 patch series "mm: establish const-correctness for pointer parameters" from Max Kellermann makes quite a number of the MM API functions more accurate about the constness of their arguments. This was getting in the way of subsystems (in this case CEPH) when they attempt to improving their own const/non-const accuracy. - The 7 patch series "Cleanup free_pages() misuse" from Vishal Moola fixes a number of code sites which were confused over when to use free_pages() vs __free_pages(). - The 3 patch series "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the mapletree code accessible to Rust. Required by nouveau and by its forthcoming successor: the new Rust Nova driver. - The 2 patch series "selftests/mm: split_huge_page_test: split_pte_mapped_thp improvements" from David Hildenbrand adds a fix and some cleanups to the thp selftesting code. - The 14 patch series "mm, swap: introduce swap table as swap cache (phase I)" from Chris Li and Kairui Song is the first step along the path to implementing "swap tables" - a new approach to swap allocation and state tracking which is expected to yield speed and space improvements. This patchset itself yields a 5-20% performance benefit in some situations. - The 3 patch series "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc layer to clean up the ptdesc code a little. - The 3 patch series "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some issues in our 5-level pagetable selftesting code. - The 2 patch series "Minor fixes for memory allocation profiling" from Suren Baghdasaryan addresses a couple of minor issues in relatively new memory allocation profiling feature. - The 3 patch series "Small cleanups" from Matthew Wilcox has a few cleanups in preparation for more memdesc work. - The 2 patch series "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from Quanmin Yan makes some changes to DAMON in furtherance of supporting arm highmem. - The 2 patch series "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad Anjum adds that compiler check to selftests code and fixes the fallout, by removing dead code. - The 10 patch series "Improvements to Victim Process Thawing and OOM Reaper Traversal Order" from zhongjinji makes a number of improvements in the OOM killer: mainly thawing a more appropriate group of victim threads so they can release resources. - The 5 patch series "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park is a bunch of small and unrelated fixups for DAMON. - The 7 patch series "mm/damon: define and use DAMON initialization check function" from SeongJae Park implement reliability and maintainability improvements to a recently-added bug fix. - The 2 patch series "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from SeongJae Park provides additional transparency to userspace clients of the DAMON_STAT information. - The 2 patch series "Expand scope of khugepaged anonymous collapse" from Dev Jain removes some constraints on khubepaged's collapsing of anon VMAs. It also increases the success rate of MADV_COLLAPSE against an anon vma. - The 2 patch series "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()" from Lorenzo Stoakes moves us further towards removal of file_operations.mmap(). This patchset concentrates upon clearing up the treatment of stacked filesystems. - The 6 patch series "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau provides some fixes and improvements to mlock's tracking of large folios. /proc/meminfo's "Mlocked" field became more accurate. - The 2 patch series "mm/ksm: Fix incorrect accounting of KSM counters during fork" from Donet Tom fixes several user-visible KSM stats inaccuracies across forks and adds selftest code to verify these counters. - The 2 patch series "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses some potential but presently benign issues in KSM's mm_slot handling. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN3cywAKCRDdBJ7gKXxA jtaPAQDmIuIu7+XnVUK5V11hsQ/5QtsUeLHV3OsAn4yW5/3dEQD/UddRU08ePN+1 2VRB0EwkLAdfMWW7TfiNZ+yhuoiL/AA= =4mhY -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - "mm, swap: improve cluster scan strategy" from Kairui Song improves performance and reduces the failure rate of swap cluster allocation - "support large align and nid in Rust allocators" from Vitaly Wool permits Rust allocators to set NUMA node and large alignment when perforning slub and vmalloc reallocs - "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend DAMOS_STAT's handling of the DAMON operations sets for virtual address spaces for ops-level DAMOS filters - "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren Baghdasaryan reduces mmap_lock contention during reads of /proc/pid/maps - "mm/mincore: minor clean up for swap cache checking" from Kairui Song performs some cleanup in the swap code - "mm: vm_normal_page*() improvements" from David Hildenbrand provides code cleanup in the pagemap code - "add persistent huge zero folio support" from Pankaj Raghav provides a block layer speedup by optionalls making the huge_zero_pagepersistent, instead of releasing it when its refcount falls to zero - "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to the recently added Kexec Handover feature - "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo Stoakes turns mm_struct.flags into a bitmap. To end the constant struggle with space shortage on 32-bit conflicting with 64-bit's needs - "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap code - "selftests/mm: Fix false positives and skip unsupported tests" from Donet Tom fixes a few things in our selftests code - "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised" from David Hildenbrand "allows individual processes to opt-out of THP=always into THP=madvise, without affecting other workloads on the system". It's a long story - the [1/N] changelog spells out the considerations - "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on the memdesc project. Please see https://kernelnewbies.org/MatthewWilcox/Memdescs and https://blogs.oracle.com/linux/post/introducing-memdesc - "Tiny optimization for large read operations" from Chi Zhiling improves the efficiency of the pagecache read path - "Better split_huge_page_test result check" from Zi Yan improves our folio splitting selftest code - "test that rmap behaves as expected" from Wei Yang adds some rmap selftests - "remove write_cache_pages()" from Christoph Hellwig removes that function and converts its two remaining callers - "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD selftests issues - "introduce kernel file mapped folios" from Boris Burkov introduces the concept of "kernel file pages". Using these permits btrfs to account its metadata pages to the root cgroup, rather than to the cgroups of random inappropriate tasks - "mm/pageblock: improve readability of some pageblock handling" from Wei Yang provides some readability improvements to the page allocator code - "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON to understand arm32 highmem - "tools: testing: Use existing atomic.h for vma/maple tests" from Brendan Jackman performs some code cleanups and deduplication under tools/testing/ - "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes a couple of 32-bit issues in tools/testing/radix-tree.c - "kasan: unify kasan_enabled() and remove arch-specific implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific initialization code into a common arch-neutral implementation - "mm: remove zpool" from Johannes Weiner removes zspool - an indirection layer which now only redirects to a single thing (zsmalloc) - "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a couple of cleanups in the fork code - "mm: remove nth_page()" from David Hildenbrand makes rather a lot of adjustments at various nth_page() callsites, eventually permitting the removal of that undesirable helper function - "introduce kasan.write_only option in hw-tags" from Yeoreum Yun creates a KASAN read-only mode for ARM, using that architecture's memory tagging feature. It is felt that a read-only mode KASAN is suitable for use in production systems rather than debug-only - "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does some tidying in the hugetlb folio allocation code - "mm: establish const-correctness for pointer parameters" from Max Kellermann makes quite a number of the MM API functions more accurate about the constness of their arguments. This was getting in the way of subsystems (in this case CEPH) when they attempt to improving their own const/non-const accuracy - "Cleanup free_pages() misuse" from Vishal Moola fixes a number of code sites which were confused over when to use free_pages() vs __free_pages() - "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the mapletree code accessible to Rust. Required by nouveau and by its forthcoming successor: the new Rust Nova driver - "selftests/mm: split_huge_page_test: split_pte_mapped_thp improvements" from David Hildenbrand adds a fix and some cleanups to the thp selftesting code - "mm, swap: introduce swap table as swap cache (phase I)" from Chris Li and Kairui Song is the first step along the path to implementing "swap tables" - a new approach to swap allocation and state tracking which is expected to yield speed and space improvements. This patchset itself yields a 5-20% performance benefit in some situations - "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc layer to clean up the ptdesc code a little - "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some issues in our 5-level pagetable selftesting code - "Minor fixes for memory allocation profiling" from Suren Baghdasaryan addresses a couple of minor issues in relatively new memory allocation profiling feature - "Small cleanups" from Matthew Wilcox has a few cleanups in preparation for more memdesc work - "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from Quanmin Yan makes some changes to DAMON in furtherance of supporting arm highmem - "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad Anjum adds that compiler check to selftests code and fixes the fallout, by removing dead code - "Improvements to Victim Process Thawing and OOM Reaper Traversal Order" from zhongjinji makes a number of improvements in the OOM killer: mainly thawing a more appropriate group of victim threads so they can release resources - "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park is a bunch of small and unrelated fixups for DAMON - "mm/damon: define and use DAMON initialization check function" from SeongJae Park implement reliability and maintainability improvements to a recently-added bug fix - "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from SeongJae Park provides additional transparency to userspace clients of the DAMON_STAT information - "Expand scope of khugepaged anonymous collapse" from Dev Jain removes some constraints on khubepaged's collapsing of anon VMAs. It also increases the success rate of MADV_COLLAPSE against an anon vma - "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()" from Lorenzo Stoakes moves us further towards removal of file_operations.mmap(). This patchset concentrates upon clearing up the treatment of stacked filesystems - "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau provides some fixes and improvements to mlock's tracking of large folios. /proc/meminfo's "Mlocked" field became more accurate - "mm/ksm: Fix incorrect accounting of KSM counters during fork" from Donet Tom fixes several user-visible KSM stats inaccuracies across forks and adds selftest code to verify these counters - "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses some potential but presently benign issues in KSM's mm_slot handling * tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits) mm: swap: check for stable address space before operating on the VMA mm: convert folio_page() back to a macro mm/khugepaged: use start_addr/addr for improved readability hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list alloc_tag: fix boot failure due to NULL pointer dereference mm: silence data-race in update_hiwater_rss mm/memory-failure: don't select MEMORY_ISOLATION mm/khugepaged: remove definition of struct khugepaged_mm_slot mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL hugetlb: increase number of reserving hugepages via cmdline selftests/mm: add fork inheritance test for ksm_merging_pages counter mm/ksm: fix incorrect KSM counter handling in mm_struct during fork drivers/base/node: fix double free in register_one_node() mm: remove PMD alignment constraint in execmem_vmalloc() mm/memory_hotplug: fix typo 'esecially' -> 'especially' mm/rmap: improve mlock tracking for large folios mm/filemap: map entire large folio faultaround mm/fault: try to map the entire file folio in finish_fault() mm/rmap: mlock large folios in try_to_unmap_one() mm/rmap: fix a mlock race condition in folio_referenced_one() ... |
||
|
Linus Torvalds
|
e1b1d03cee |
for-6.18/block-20250929
-----BEGIN PGP SIGNATURE-----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=kOmc
-----END PGP SIGNATURE-----
Merge tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
|
||
|
Linus Torvalds
|
7f70725741 |
Kbuild updates for 6.18
- Extend modules.builtin.modinfo to include module aliases from MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such as kmod) can verify that a particular module alias will be handled by a builtin module. - Bump the minimum version of LLVM for building the kernel to 15.0.0. - Upgrade several userspace API checks in headers_check.pl to errors. - Unify and consolidate CONFIG_WERROR / W=e handling. - Turn assembler and linker warnings into errors with CONFIG_WERROR / W=e. - Respect CONFIG_WERROR / W=e when building userspace programs (userprogs). - Enable -Werror unconditionally when building host programs (hostprogs). - Support copy_file_range() and data segment alignment in gen_init_cpio to improve performance on filesystems that support reflinks such as btrfs and XFS. - Miscellaneous small changes to scripts and configuration files. Signed-off-by: Nathan Chancellor <nathan@kernel.org> -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaNrp6QAKCRAdayaRccAa ljxRAP4hYocKXeWsiJzkTB199P4QUGWf220a9elBmtdJEed07gD/VBnCbSOxG3RO vS8qbJHwxUFL7a+mDV8RIVXSt99NpAg= =psG/ -----END PGP SIGNATURE----- Merge tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux Pull Kbuild updates from Nathan Chancellor: - Extend modules.builtin.modinfo to include module aliases from MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such as kmod) can verify that a particular module alias will be handled by a builtin module - Bump the minimum version of LLVM for building the kernel to 15.0.0 - Upgrade several userspace API checks in headers_check.pl to errors - Unify and consolidate CONFIG_WERROR / W=e handling - Turn assembler and linker warnings into errors with CONFIG_WERROR / W=e - Respect CONFIG_WERROR / W=e when building userspace programs (userprogs) - Enable -Werror unconditionally when building host programs (hostprogs) - Support copy_file_range() and data segment alignment in gen_init_cpio to improve performance on filesystems that support reflinks such as btrfs and XFS - Miscellaneous small changes to scripts and configuration files * tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (47 commits) modpost: Initialize builtin_modname to stop SIGSEGVs Documentation: kbuild: note CONFIG_DEBUG_EFI in reproducible builds kbuild: vmlinux.unstripped should always depend on .vmlinux.export.o modpost: Create modalias for builtin modules modpost: Add modname to mod_device_table alias scsi: Always define blogic_pci_tbl structure kbuild: extract modules.builtin.modinfo from vmlinux.unstripped kbuild: keep .modinfo section in vmlinux.unstripped kbuild: always create intermediate vmlinux.unstripped s390: vmlinux.lds.S: Reorder sections KMSAN: Remove tautological checks objtool: Drop noinstr hack for KCSAN_WEAK_MEMORY lib/Kconfig.debug: Drop CLANG_VERSION check from DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT riscv: Remove ld.lld version checks from many TOOLCHAIN_HAS configs riscv: Unconditionally use linker relaxation riscv: Remove version check for LTO_CLANG selects powerpc: Drop unnecessary initializations in __copy_inst_from_kernel_nofault() mips: Unconditionally select ARCH_HAS_CURRENT_STACK_POINTER arm64: Remove tautological LLVM Kconfig conditions ARM: Clean up definition of ARM_HAS_GROUP_RELOCS ... |
||
|
Linus Torvalds
|
38057e3236 |
soc: driver updates for 6.18
Lots of platform specific updates for Qualcomm SoCs, including a new TEE subsystem driver for the Qualcomm QTEE firmware interface. Added support for the Apple A11 SoC in drivers that are shared with the M1/M2 series, among more updates for those. Smaller platform specific driver updates for Renesas, ASpeed, Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs. Driver updates in the cache controller, memory controller and reset controller subsystems. SCMI firmware updates to add more features and improve robustness. This includes support for having multiple SCMI providers in a single system. TEE subsystem support for protected DMA-bufs, allowing hardware to access memory areas that managed by the kernel but remain inaccessible from the CPU in EL1/EL0. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmjdpaoACgkQmmx57+YA GNnBXA//QgmFXYGG7QfB825mt0orKZxpfpLcwvqO7hkWgbXtl7Gokw2lGYN6bwLu zvY4MQ/bVoZ8R5uTVmuaSHBRsttSen8mBf+V0vzsBM/DRRVxvIN/7TESrY3J7Dtx J5syHKIBiUtdkDebWWC6jIElczIBItsd03Ln4Xjjt8Vas5YOO4n44zFrPo+FwlN/ I6D2K86AiNZTtUCDMtB6VfJ6YtjYBWcWnJm7FXw/vE8FAXdZUnNWnZ8hbdQ5GaME JZGepUhONaOMUoGNZNaDGw511RdPhYzPjj9rCsIx2qdsRO9/4tJ8ccpW2aUMYh8c nA6w8Hj8jCwco6aYYrDUDV9uRtURDrmyJgTJBNLU05e/L+MuJ3IZNlzHFWlsxIAE vhyTdmg/P04ClQyixCl67IH/66F/0smX9C+1761LrD7GTdfR92KPl5W6q+DPBg/x yf+s2p3+f7ItV5XobKOrbf3w0xazeDb5o/EK8BufMx9vSe9bpzJ0gOf0CmNXEpyZ owAhbh6wXX1YwPcyA9LHv6gthyJwc/3fLu49ggMZP2rU01ccKOYn9H0cr7C8NVmy wEpJR0lp5aSw2oRkPkxB6sFmUohcpr8/OXGGJuvCXkYsUY1BEup4lewvbIWK4WoE c84kbbaHsjgFhe3IRlQw3G4KLYQT3jRtF7fH+gPx556BcI6K+lg= =mcZR -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Lots of platform specific updates for Qualcomm SoCs, including a new TEE subsystem driver for the Qualcomm QTEE firmware interface. Added support for the Apple A11 SoC in drivers that are shared with the M1/M2 series, among more updates for those. Smaller platform specific driver updates for Renesas, ASpeed, Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs. Driver updates in the cache controller, memory controller and reset controller subsystems. SCMI firmware updates to add more features and improve robustness. This includes support for having multiple SCMI providers in a single system. TEE subsystem support for protected DMA-bufs, allowing hardware to access memory areas that managed by the kernel but remain inaccessible from the CPU in EL1/EL0" * tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits) soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu() soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver soc: fsl: qe: Change GPIO driver to a proper platform driver tee: fix register_shm_helper() pmdomain: apple: Add "apple,t8103-pmgr-pwrstate" dt-bindings: spmi: Add Apple A11 and T2 compatible serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus Documentation: tee: Add Qualcomm TEE driver tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl tee: qcom: add primordial object tee: add Qualcomm TEE driver tee: increase TEE_MAX_ARG_SIZE to 4096 tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF tee: add close_context to TEE driver operation ... |
||
|
Linus Torvalds
|
4b81e2eb9e |
Updates for the VDSO subsystem:
- Further consolidation of the VDSO infrastructure and the common data
store.
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
-----BEGIN PGP SIGNATURE-----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=i3UB
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Further consolidation of the VDSO infrastructure and the common data
store
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
* tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: vDSO: Drop vdso_test_clock_getres
selftests: vDSO: vdso_test_abi: Add tests for clock_gettime64()
selftests: vDSO: vdso_test_abi: Test CPUTIME clocks
selftests: vDSO: vdso_test_abi: Use explicit indices for name array
selftests: vDSO: vdso_test_abi: Drop clock availability tests
selftests: vDSO: vdso_test_abi: Use ksft_finished()
selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing vDSO
selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper
vdso: Add struct __kernel_old_timeval forward declaration to gettime.h
vdso: Gate VDSO_GETRANDOM behind HAVE_GENERIC_VDSO
vdso: Drop Kconfig GENERIC_VDSO_TIME_NS
vdso: Drop Kconfig GENERIC_VDSO_DATA_STORE
vdso: Drop kconfig GENERIC_COMPAT_VDSO
vdso: Drop kconfig GENERIC_VDSO_32
riscv: vdso: Untangle Kconfig logic
time: Build generic update_vsyscall() only with generic time vDSO
vdso/gettimeofday: Remove !CONFIG_TIME_NS stubs
vdso: Move ENABLE_COMPAT_VDSO from core to arm64
ARM: VDSO: Remove cntvct_ok global variable
vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY
|
||
Sean Christopherson
|
20c4892058 |
KVM: Export KVM-internal symbols for sub-modules only
Rework the vast majority of KVM's exports to expose symbols only to KVM
submodules, i.e. to x86's kvm-{amd,intel}.ko and PPC's kvm-{pr,hv}.ko.
With few exceptions, KVM's exported APIs are intended (and safe) for KVM-
internal usage only.
Keep kvm_get_kvm(), kvm_get_kvm_safe(), and kvm_put_kvm() as normal
exports, as they are needed by VFIO, and are generally safe for external
usage (though ideally even the get/put APIs would be KVM-internal, and
VFIO would pin a VM by grabbing a reference to its associated file).
Implement a framework in kvm_types.h in anticipation of providing a macro
to restrict KVM-specific kernel exports, i.e. to provide symbol exports
for KVM if and only if KVM is built as one or more modules.
Link: https://lore.kernel.org/r/20250919003303.1355064-3-seanjc@google.com
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
||
|
Linus Torvalds
|
6c7340a7a8 |
Scheduler updates for v6.18:
Core scheduler changes:
- Make migrate_{en,dis}able() inline, to improve performance
(Menglong Dong)
- Move STDL_INIT() functions out-of-line (Peter Zijlstra)
- Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)
Fair scheduling:
- Defer throttling when tasks exit to user-space, to reduce the
chance & impact of throttle-preemption with held locks and
other resources. (Aaron Lu, Valentin Schneider)
- Get rid of sched_domains_curr_level hack for tl->cpumask(),
as the warning was getting triggered on certain topologies.
(Peter Zijlstra)
Misc cleanups & fixes:
- Header cleanups (Menglong Dong)
- Fix race in push_dl_task() (Harshit Agarwal)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=8ZTZ
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Make migrate_{en,dis}able() inline, to improve performance
(Menglong Dong)
- Move STDL_INIT() functions out-of-line (Peter Zijlstra)
- Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)
Fair scheduling:
- Defer throttling to when tasks exit to user-space, to reduce the
chance & impact of throttle-preemption with held locks and other
resources (Aaron Lu, Valentin Schneider)
- Get rid of sched_domains_curr_level hack for tl->cpumask(), as the
warning was getting triggered on certain topologies (Peter
Zijlstra)
Misc cleanups & fixes:
- Header cleanups (Menglong Dong)
- Fix race in push_dl_task() (Harshit Agarwal)"
* tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix some typos in include/linux/preempt.h
sched: Make migrate_{en,dis}able() inline
rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
sched/fair: Do not balance task to a throttled cfs_rq
sched/fair: Do not special case tasks in throttled hierarchy
sched/fair: update_cfs_group() for throttled cfs_rqs
sched/fair: Propagate load for throttled cfs_rq
sched/fair: Get rid of throttled_lb_pair()
sched/fair: Task based throttle time accounting
sched/fair: Switch to task based throttle model
sched/fair: Implement throttle task work and related helpers
sched/fair: Add related data structure for task based throttle
sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig
sched: Move STDL_INIT() functions out-of-line
sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
sched/deadline: Fix race in push_dl_task()
|
||
|
Linus Torvalds
|
417552999d |
powerpc updates for 6.18
- powerpc support for BPF arena and arena atomics
- Patches to switch to msi parent domain (per-device MSI domains)
- Add a lock contention tracepoint in the queued spinlock slowpath
- Fixes for underflow in pseries/powernv msi and pci paths
- Switch from legacy-of-mm-gpiochip dependency to platform driver
- Fixes for handling TLB misses
- Introduce support for powerpc papr-hvpipe
- Add vpa-dtl PMU driver for pseries platform
- Misc fixes and cleanups
Thanks to: Aboorva Devarajan, Aditya Bodkhe, Andrew Donnellan, Athira Rajeev, Cédric Le Goater, Christophe Leroy,
Erhard Furtner, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joe Lawrence, Kajol Jain, Kienan Stewart,
Linus Walleij, Mahesh Salgaonkar, Nam Cao, Nicolas Schier, Nysal Jan K.A., Ritesh Harjani (IBM), Ruben Wauters,
Saket Kumar Bhaskar, Shashank MS, Shrikanth Hegde, Tejas Manhas, Thomas Gleixner, Thomas Huth, Thorsten Blum,
Tyrel Datwyler, Venkat Rao Bagalkote,
-----BEGIN PGP SIGNATURE-----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=U2s/
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- powerpc support for BPF arena and arena atomics
- Patches to switch to msi parent domain (per-device MSI domains)
- Add a lock contention tracepoint in the queued spinlock slowpath
- Fixes for underflow in pseries/powernv msi and pci paths
- Switch from legacy-of-mm-gpiochip dependency to platform driver
- Fixes for handling TLB misses
- Introduce support for powerpc papr-hvpipe
- Add vpa-dtl PMU driver for pseries platform
- Misc fixes and cleanups
Thanks to Aboorva Devarajan, Aditya Bodkhe, Andrew Donnellan, Athira
Rajeev, Cédric Le Goater, Christophe Leroy, Erhard Furtner, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joe Lawrence,
Kajol Jain, Kienan Stewart, Linus Walleij, Mahesh Salgaonkar, Nam Cao,
Nicolas Schier, Nysal Jan K.A., Ritesh Harjani (IBM), Ruben Wauters,
Saket Kumar Bhaskar, Shashank MS, Shrikanth Hegde, Tejas Manhas, Thomas
Gleixner, Thomas Huth, Thorsten Blum, Tyrel Datwyler, and Venkat Rao
Bagalkote.
* tag 'powerpc-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (49 commits)
powerpc/pseries: Define __u{8,32} types in papr_hvpipe_hdr struct
genirq/msi: Remove msi_post_free()
powerpc/perf/vpa-dtl: Add documentation for VPA dispatch trace log PMU
powerpc/perf/vpa-dtl: Handle the writing of perf record when aux wake up is needed
powerpc/perf/vpa-dtl: Add support to capture DTL data in aux buffer
powerpc/perf/vpa-dtl: Add support to setup and free aux buffer for capturing DTL data
docs: ABI: sysfs-bus-event_source-devices-vpa-dtl: Document sysfs event format entries for vpa_dtl pmu
powerpc/vpa_dtl: Add interface to expose vpa dtl counters via perf
powerpc/time: Expose boot_tb via accessor
powerpc/32: Remove PAGE_KERNEL_TEXT to fix startup failure
powerpc/fprobe: fix updated fprobe for function-graph tracer
powerpc/ftrace: support CONFIG_FUNCTION_GRAPH_RETVAL
powerpc64/modules: replace stub allocation sentinel with an explicit counter
powerpc64/modules: correctly iterate over stubs in setup_ftrace_ool_stubs
powerpc/ftrace: ensure ftrace record ops are always set for NOPs
powerpc/603: Really copy kernel PGD entries into all PGDIRs
powerpc/8xx: Remove left-over instruction and comments in DataStoreTLBMiss handler
powerpc/pseries: HVPIPE changes to support migration
powerpc/pseries: Enable hvpipe with ibm,set-system-parameter RTAS
powerpc/pseries: Enable HVPIPE event message interrupt
...
|
||
|
Linus Torvalds
|
8c1ed30218 |
ffs-const update for v6.18-rc1
- PCI: Fix theoretical underflow in use of ffs().
- Universally apply __attribute_const__ to all architecture's ffs()-family
of functions.
- Add KUnit tests for ffs() behavior and const-ness.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaNrWngAKCRA2KwveOeQk
u3ZGAPwJTscARU4MspnqpbuAV601dG1TNoJG+8JYH84r+R2jjQEAlmBZB0jaHbC2
qFWjHivD/0ofvihKfAPFgxlakyV1XAg=
=diXF
-----END PGP SIGNATURE-----
Merge tag 'ffs-const-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull ffs const-attribute cleanups from Kees Cook:
"While working on various hardening refactoring a while back we
encountered inconsistencies in the application of __attribute_const__
on the ffs() family of functions.
This series fixes this across all archs and adds KUnit tests.
Notably, this found a theoretical underflow in PCI (also fixed here)
and uncovered an inefficiency in ARC (fixed in the ARC arch PR). I
kept the series separate from the general hardening PR since it is a
stand-alone "topic".
- PCI: Fix theoretical underflow in use of ffs().
- Universally apply __attribute_const__ to all architecture's
ffs()-family of functions.
- Add KUnit tests for ffs() behavior and const-ness"
* tag 'ffs-const-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
KUnit: ffs: Validate all the __attribute_const__ annotations
sparc: Add __attribute_const__ to ffs()-family implementations
xtensa: Add __attribute_const__ to ffs()-family implementations
s390: Add __attribute_const__ to ffs()-family implementations
parisc: Add __attribute_const__ to ffs()-family implementations
mips: Add __attribute_const__ to ffs()-family implementations
m68k: Add __attribute_const__ to ffs()-family implementations
openrisc: Add __attribute_const__ to ffs()-family implementations
riscv: Add __attribute_const__ to ffs()-family implementations
hexagon: Add __attribute_const__ to ffs()-family implementations
alpha: Add __attribute_const__ to ffs()-family implementations
sh: Add __attribute_const__ to ffs()-family implementations
powerpc: Add __attribute_const__ to ffs()-family implementations
x86: Add __attribute_const__ to ffs()-family implementations
csky: Add __attribute_const__ to ffs()-family implementations
bitops: Add __attribute_const__ to generic ffs()-family implementations
KUnit: Introduce ffs()-family tests
PCI: Test for bit underflow in pcie_set_readrq()
|
||
|
Linus Torvalds
|
d8768fb12a |
Crypto library updates for 6.18
- Add a RISC-V optimized implementation of Poly1305. This code was
written by Andy Polyakov and contributed by Zhihang Shao.
- Migrate the MD5 code into lib/crypto/, and add KUnit tests for MD5.
Yes, it's still the 90s, and several kernel subsystems are still using
MD5 for legacy use cases. As long as that remains the case, it's
helpful to clean it up in the same way as I've been doing for other
algorithms. Later, I plan to convert most of these users of MD5 to use
the new MD5 library API instead of the generic crypto API.
- Simplify the organization of the ChaCha, Poly1305, BLAKE2s, and
Curve25519 code. Consolidate these into one module per algorithm,
and centralize the configuration and build process. This is the same
reorganization that has already been successful for SHA-1 and SHA-2.
- Remove the unused crypto_kpp API for Curve25519.
- Migrate the BLAKE2s and Curve25519 self-tests to KUnit.
- Always enable the architecture-optimized BLAKE2s code.
Due to interdependencies between test and non-test code, both are
included in this pull request. The broken-down diffstat is as follows:
Tests: 735 insertions(+), 1917 deletions(-)
RISC-V Poly1305: 877 insertions(+), 1 deletion(-)
Other: 1777 insertions(+), 3117 deletions(-)
Besides the new RISC-V code which is an addition, there are quite a
few simplifications due to the improved code organization for multiple
algorithms, the removal of the unused crypto_kpp API for Curve25519
and redundant tests, and the redesign of the BLAKE2s test.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaNgwUhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK3EnAP96hB1wD12DvIovGCmWnnlbzOt+CoK2
B5CW74eYEZiSbwD7BiKPDqvSmLzEBtbKmOSwRvxKuQ2uGGef3USFKYVCiw0=
=DY5R
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add a RISC-V optimized implementation of Poly1305. This code was
written by Andy Polyakov and contributed by Zhihang Shao.
- Migrate the MD5 code into lib/crypto/, and add KUnit tests for MD5.
Yes, it's still the 90s, and several kernel subsystems are still
using MD5 for legacy use cases. As long as that remains the case,
it's helpful to clean it up in the same way as I've been doing for
other algorithms.
Later, I plan to convert most of these users of MD5 to use the new
MD5 library API instead of the generic crypto API.
- Simplify the organization of the ChaCha, Poly1305, BLAKE2s, and
Curve25519 code.
Consolidate these into one module per algorithm, and centralize the
configuration and build process. This is the same reorganization that
has already been successful for SHA-1 and SHA-2.
- Remove the unused crypto_kpp API for Curve25519.
- Migrate the BLAKE2s and Curve25519 self-tests to KUnit.
- Always enable the architecture-optimized BLAKE2s code.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (38 commits)
crypto: md5 - Implement export_core() and import_core()
wireguard: kconfig: simplify crypto kconfig selections
lib/crypto: tests: Enable Curve25519 test when CRYPTO_SELFTESTS
lib/crypto: curve25519: Consolidate into single module
lib/crypto: curve25519: Move a couple functions out-of-line
lib/crypto: tests: Add Curve25519 benchmark
lib/crypto: tests: Migrate Curve25519 self-test to KUnit
crypto: curve25519 - Remove unused kpp support
crypto: testmgr - Remove curve25519 kpp tests
crypto: x86/curve25519 - Remove unused kpp support
crypto: powerpc/curve25519 - Remove unused kpp support
crypto: arm/curve25519 - Remove unused kpp support
crypto: hisilicon/hpre - Remove unused curve25519 kpp support
lib/crypto: tests: Add KUnit tests for BLAKE2s
lib/crypto: blake2s: Consolidate into single C translation unit
lib/crypto: blake2s: Move generic code into blake2s.c
lib/crypto: blake2s: Always enable arch-optimized BLAKE2s code
lib/crypto: blake2s: Remove obsolete self-test
lib/crypto: x86/blake2s: Reduce size of BLAKE2S_SIGMA2
lib/crypto: chacha: Consolidate into single module
...
|
||
|
Linus Torvalds
|
449c2b302c |
vfs-6.18-rc1.async
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQkAAKCRCRxhvAZXjc
oijOAQCw+gE9GkvYJ7TOCiqVFj8RZZ1tb7NiCdBRCa4wXM7KMwD9Gwim//G8Hjyy
dNPZejphGdxv99Skwp/0nfyDGL6x7w4=
=zIJf
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.18-rc1.async' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs async directory updates from Christian Brauner:
"This contains further preparatory changes for the asynchronous directory
locking scheme:
- Add lookup_one_positive_killable() which allows overlayfs to
perform lookup that won't block on a fatal signal
- Unify the mount idmap handling in struct renamedata as a rename can
only happen within a single mount
- Introduce kern_path_parent() for audit which sets the path to the
parent and returns a dentry for the target without holding any
locks on return
- Rename kern_path_locked() as it is only used to prepare for the
removal of an object from the filesystem:
kern_path_locked() => start_removing_path()
kern_path_create() => start_creating_path()
user_path_create() => start_creating_user_path()
user_path_locked_at() => start_removing_user_path_at()
done_path_create() => end_creating_path()
NA => end_removing_path()"
* tag 'vfs-6.18-rc1.async' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
debugfs: rename start_creating() to debugfs_start_creating()
VFS: rename kern_path_locked() and related functions.
VFS/audit: introduce kern_path_parent() for audit
VFS: unify old_mnt_idmap and new_mnt_idmap in renamedata
VFS: discard err2 in filename_create()
VFS/ovl: add lookup_one_positive_killable()
|
||
|
Linus Torvalds
|
722df25ddf |
kernel-6.18-rc1.clone3
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZgMQAKCRCRxhvAZXjc ornXAP954dZjz+OJw6lJLCf0j9TXJOczGHvK3oW5ZD9KnqtTdwEA7p1A6WMOKJyl 8VtTgCS0yNt8QlznUnsSDfVm0jXVGAY= =tUXG -----END PGP SIGNATURE----- Merge tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull copy_process updates from Christian Brauner: "This contains the changes to enable support for clone3() on nios2 which apparently is still a thing. The more exciting part of this is that it cleans up the inconsistency in how the 64-bit flag argument is passed from copy_process() into the various other copy_*() helpers" [ Fixed up rv ltl_monitor 32-bit support as per Sasha Levin in the merge ] * tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: nios2: implement architecture-specific portion of sys_clone3 arch: copy_thread: pass clone_flags as u64 copy_process: pass clone_flags as u64 across calltree copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64) |
||
|
Linus Torvalds
|
56e7b31071 |
vfs-6.18-rc1.inode
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQQgAKCRCRxhvAZXjc
oud9AQD5IG4sNnzCjsvcTDpQkbX5eZW+LFIiAiiN+nztZ+OcRQEAvC2N7YovfqM3
TWpVoNDKvEPdtDc9ttFMUKqBZYvxvgE=
=sEaL
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.18-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode updates from Christian Brauner:
"This contains a series I originally wrote and that Eric brought over
the finish line. It moves out the i_crypt_info and i_verity_info
pointers out of 'struct inode' and into the fs-specific part of the
inode.
So now the few filesytems that actually make use of this pay the price
in their own private inode storage instead of forcing it upon every
user of struct inode.
The pointer for the crypt and verity info is simply found by storing
an offset to its address in struct fsverity_operations and struct
fscrypt_operations. This shrinks struct inode by 16 bytes.
I hope to move a lot more out of it in the future so that struct inode
becomes really just about very core stuff that we need, much like
struct dentry and struct file, instead of the dumping ground it has
become over the years.
On top of this are a various changes associated with the ongoing inode
lifetime handling rework that multiple people are pushing forward:
- Stop accessing inode->i_count directly in f2fs and gfs2. They
simply should use the __iget() and iput() helpers
- Make the i_state flags an enum
- Rework the iput() logic
Currently, if we are the last iput, and we have the I_DIRTY_TIME
bit set, we will grab a reference on the inode again and then mark
it dirty and then redo the put. This is to make sure we delay the
time update for as long as possible
We can rework this logic to simply dec i_count if it is not 1, and
if it is do the time update while still holding the i_count
reference
Then we can replace the atomic_dec_and_lock with locking the
->i_lock and doing atomic_dec_and_test, since we did the
atomic_add_unless above
- Add an icount_read() helper and convert everyone that accesses
inode->i_count directly for this purpose to use the helper
- Expand dump_inode() to dump more information about an inode helping
in debugging
- Add some might_sleep() annotations to iput() and associated
helpers"
* tag 'vfs-6.18-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: add might_sleep() annotation to iput() and more
fs: expand dump_inode()
inode: fix whitespace issues
fs: add an icount_read helper
fs: rework iput logic
fs: make the i_state flags an enum
fs: stop accessing ->i_count directly in f2fs and gfs2
fsverity: check IS_VERITY() in fsverity_cleanup_inode()
fs: remove inode::i_verity_info
btrfs: move verity info pointer to fs-specific part of inode
f2fs: move verity info pointer to fs-specific part of inode
ext4: move verity info pointer to fs-specific part of inode
fsverity: add support for info in fs-specific part of inode
fs: remove inode::i_crypt_info
ceph: move crypt info pointer to fs-specific part of inode
ubifs: move crypt info pointer to fs-specific part of inode
f2fs: move crypt info pointer to fs-specific part of inode
ext4: move crypt info pointer to fs-specific part of inode
fscrypt: add support for info in fs-specific part of inode
fscrypt: replace raw loads of info pointer with helper function
|
||
Menglong Dong
|
35561bab76 |
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
The include/generated/asm-offsets.h is generated in Kbuild during compiling from arch/SRCARCH/kernel/asm-offsets.c. When we want to generate another similar offset header file, circular dependency can happen. For example, we want to generate a offset file include/generated/test.h, which is included in include/sched/sched.h. If we generate asm-offsets.h first, it will fail, as include/sched/sched.h is included in asm-offsets.c and include/generated/test.h doesn't exist; If we generate test.h first, it can't success neither, as include/generated/asm-offsets.h is included by it. In x86_64, the macro COMPILE_OFFSETS is used to avoid such circular dependency. We can generate asm-offsets.h first, and if the COMPILE_OFFSETS is defined, we don't include the "generated/test.h". And we define the macro COMPILE_OFFSETS for all the asm-offsets.c for this purpose. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> |
||
Arnd Bergmann
|
a53811fb37 |
FSL SOC Changes for 6.18:
- Use for_each_online_cpu() instead of for_each_cpu() in qbman - Update FSL QUICC ENGINE GPIO driver to a standard platform driver and stop using legacy-of-mm-gpiochip.h header - Misc fixes on bus/fsl-mc -----BEGIN PGP SIGNATURE----- iJIEABYKADoWIQQQ/+b4s5DeF6zCYyNoqS/rAbjdeAUCaNQTmBwcY2hyaXN0b3Bo ZS5sZXJveUBjc2dyb3VwLmV1AAoJEGipL+sBuN14UZABAKSmuSrlq3ErA/76SfYU vwqpn2OnQAWfb5ttS3teCnpqAQDwSOzhT2wO0EtK5HPnA9zC/iB8FeDLxtMIXFuW vvcMCA== =ECnN -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmjUX5wACgkQmmx57+YA GNlecg//TwLQSuZqwgk87L04xWSiWE/OhbMy7h9fuDrlbJNwl2xLyTXvSTq3E6RW NyPTTz471Y2Z+Vpd2iw6m5DZjMyha7ZziUiNTeTKeXwzaiATuuz1154fmpYD3PH4 T16OL2/KsrkPVZfyM6Ww/si49XuSvbRvd+Oh2QlY2/chkyz+pSRDINcgPDqZTaED bTRQhvZxx8ujBKJbFAVpO64qx4mpaaoIevX9qh5w5fBxoQywHxyGL25jsPlkzD1y 8akMNZ0H1hPE+vXMTdEIv14xiVavS4Exwv2HwDAruuJhsIC0f9C8rY4YYMXuM6yg 29LHmIGYHEjarS1ajFcEtAgAWtqx05GqbGlelxKfiLzaLSW8od7LE+5Gc0FwUW/4 BcmycStI4eh9piDyQIA2EyeA7OEIcrphJS/+CIQk+IJRBc79WMPaHpuaxCaMR1y6 FAOJCGpaqGja4+FRLClmGWGAlmyKROG0g+P9dUJu8DgIFO7f8rrJtzr1sv0+Oc37 zCBIHwiVlXeHcmWETjEGcOjQI8L9oQ3GBX7TrSGcM4+bXL9De4X8Es2wdPx48gkf LlNOeW1TcXhHSWcOhhgHHiEFEOE5m5cYn9weDpnWSkX6eBK/jB1nvXNSSJkgOgi+ Vws1/Y4iD72nfTfxtr96sWZZsPQEfSh+WezRoy5WjpEPkvdQPYQ= =Zmaw -----END PGP SIGNATURE----- Merge tag 'soc_fsl-6.18-1' of https://github.com/chleroy/linux into soc/drivers FSL SOC Changes for 6.18: - Use for_each_online_cpu() instead of for_each_cpu() in qbman - Update FSL QUICC ENGINE GPIO driver to a standard platform driver and stop using legacy-of-mm-gpiochip.h header - Misc fixes on bus/fsl-mc * tag 'soc_fsl-6.18-1' of https://github.com/chleroy/linux: soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu() soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver soc: fsl: qe: Change GPIO driver to a proper platform driver bus: fsl-mc: Replace snprintf and sprintf with sysfs_emit in sysfs show functions bus: fsl-mc: Check return value of platform_get_resource() Link: https://lore.kernel.org/r/26615a15-3494-435f-b0c1-861122b4b5e1@csgroup.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
NeilBrown
|
3d18f80ce1 |
VFS: rename kern_path_locked() and related functions.
kern_path_locked() is now only used to prepare for removing an object from the filesystem (and that is the only credible reason for wanting a positive locked dentry). Thus it corresponds to kern_path_create() and so should have a corresponding name. Unfortunately the name "kern_path_create" is somewhat misleading as it doesn't actually create anything. The recently added simple_start_creating() provides a better pattern I believe. The "start" can be matched with "end" to bracket the creating or removing. So this patch changes names: kern_path_locked -> start_removing_path kern_path_create -> start_creating_path user_path_create -> start_creating_user_path user_path_locked_at -> start_removing_user_path_at done_path_create -> end_creating_path and also introduces end_removing_path() which is identical to end_creating_path(). __start_removing_path (which was __kern_path_locked) is enhanced to call mnt_want_write() for consistency with the start_creating_path(). Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
Haren Myneni
|
ef104054a3 |
powerpc/pseries: Define __u{8,32} types in papr_hvpipe_hdr struct
Fix the the following build errors with CONFIG_UAPI_HEADER_TEST:
./usr/include/asm/papr-hvpipe.h:16:9: error: unknown type name 'u8'
16 | u8 version;
./usr/include/asm/papr-hvpipe.h:17:9: error: unknown type name 'u8'
17 | u8 reserved[3];
./usr/include/asm/papr-hvpipe.h:18:9: error: unknown type name 'u32'
18 | u32 flags;
./usr/include/asm/papr-hvpipe.h:19:9: error: unknown type name 'u8'
19 | u8 reserved2[40];
Fixes:
|
||
|
Christophe Leroy
|
e9713655b2 |
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
Remove legacy-of-mm-gpiochip.h header file. The above mentioned
file provides an OF API that's deprecated. There is no agnostic
alternatives to it and we have to open code the logic which was
hidden behind of_mm_gpiochip_add_data(). Note, most of the GPIO
drivers are using their own labeling schemas and resource retrieval
that only a few may gain of the code deduplication, so whenever
alternative is appear we can move drivers again to use that one.
As a side effect this change fixes a potential memory leak on
an error path, if of_mm_gpiochip_add_data() fails.
[Text copied from commit
|
||
Athira Rajeev
|
b5e71cafa0 |
powerpc/perf/vpa-dtl: Handle the writing of perf record when aux wake up is needed
Handle the case when the aux buffer is going to be full and data needs to be written to the data file. perf_aux_output_begin() function checks if there is enough space depending on the values of aux_wakeup and aux_watermark which is part of "struct perf_buffer". Inorder to maintain where to write to aux buffer, add two fields to "struct vpa_pmu_buf". Field "threshold" to indicate total possible DTL entries that can be contained in aux buffer and field "full" to indicate anytime when buffer is full. In perf_aux_output_end, there is check to see if wake up is needed based on aux head value. In vpa_dtl_capture_aux(), check if there is enough space to contain the DTL data. If not, save the data for available memory and set full to true. Set head of private aux to zero when buffer is full so that next data will be copied to beginning of the buffer. The address used for copying to aux is "aux_copy_buf + buf->head". So once buffer is full, set head to zero, so that next time it will be written from start of the buffer. Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Tejas Manhas <tejas05@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250915102947.26681-7-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
2de8b6dd5a |
powerpc/perf/vpa-dtl: Add support to capture DTL data in aux buffer
vpa dtl pmu has one hrtimer added per vpa-dtl pmu thread. When the hrtimer expires, in the timer handler, code is added to save the DTL data to perf event record via vpa_dtl_capture_aux() function. The DTL (Dispatch Trace Log) contains information about dispatch/preempt, enqueue time etc. We directly copy the DTL buffer data as part of auxiliary buffer. Data will be written to disk only when the allocated buffer is full. By this approach, all the DTL data will be present as-is in the perf.data. The data will be post-processed in perf tools side when doing perf report/perf script and this will avoid time taken to create samples in the kernel space. To corelate each DTL entry with other events across CPU's, we need to map timebase from "struct dtl_entry" which phyp provides with boot timebase. This also needs timebase frequency. Define "struct boottb_freq" to save these details. Added changes to capture the Dispatch Trace Log details to AUX buffer in vpa_dtl_dump_sample_data(). Boot timebase and frequency needs to be saved only at once, added field to indicate this as part of "vpa_pmu_buf" structure. perf_aux_output_begin: This function is called before writing to AUX area. This returns the pointer to aux area private structure, ie "struct vpa_pmu_buf". The function obtains the output handle (used in perf_aux_output_end). when capture completes in vpa_dtl_capture_aux(), call perf_aux_output_end() to commit the recorded data. perf_aux_output_end() is called to move the aux->head of "struct perf_buffer" to indicate size of data in aux buffer. aux_tail will be moved in perf tools side when writing the data from aux buffer to perf.data file in disk. It is responsiblity of PMU driver to make sure data is copied between perf_aux_output_begin and perf_aux_output_end. Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Tejas Manhas <tejas05@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250915102947.26681-6-atrajeev@linux.ibm.com |
||
|
Athira Rajeev
|
5d75aed84d |
powerpc/perf/vpa-dtl: Add support to setup and free aux buffer for capturing DTL data
vpa dtl pmu has one hrtimer added per vpa-dtl pmu thread. When the hrtimer expires, in the timer handler, code is added to save the DTL data to perf event record. DTL (Dispatch Trace Log) contains information about dispatch/preempt, enqueue time etc. We directly copy the DTL buffer data as part of auxiliary buffer and it will be postprocessed later. To enable the support for aux buffer, add the PMU callbacks for setup_aux and free_aux. In setup_aux, set up pmu-private data structures for an AUX area. rb_alloc_aux uses "alloc_pages_node" and returns pointer to each page address. Map these pages to contiguous space using vmap and use that as base address. The aux private data structure ie, "struct vpa_pmu_buf" mainly saves: 1. buf->base: aux buffer base address 2. buf->head: offset from base address where data will be written to. 3. buf->size: Size of allocated memory free_aux will free pmu-private AUX data structures. Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com> Tested-by: Tejas Manhas <tejas05@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250915102947.26681-5-atrajeev@linux.ibm.com |
||
Kajol Jain
|
4708fba19a |
powerpc/vpa_dtl: Add interface to expose vpa dtl counters via perf
The pseries Shared Processor Logical Partition(SPLPAR) machines can retrieve a log of dispatch and preempt events from the hypervisor using data from Disptach Trace Log(DTL) buffer. With this information, user can retrieve when and why each dispatch & preempt has occurred. Added an interface to expose the Virtual Processor Area(VPA) DTL counters via perf. The following events are available and exposed in sysfs: vpa_dtl/dtl_cede/ - Trace voluntary (OS initiated) virtual processor waits vpa_dtl/dtl_preempt/ - Trace time slice preempts vpa_dtl/dtl_fault/ - Trace virtual partition memory page faults. vpa_dtl/dtl_all/ - Trace all (dtl_cede/dtl_preempt/dtl_fault) Added interface defines supported event list, config fields for the event attributes and their corresponding bit values which are exported via sysfs. User could use the standard perf tool to access perf events exposed via vpa-dtl pmu. The VPA DTL PMU counters do not interrupt on overflow or generate any PMI interrupts. Therefore, the kernel needs to poll the counters, added hrtimer code to do that. The timer interval can be provided by user via sample_period field in nano seconds. There is one hrtimer added per vpa-dtl pmu thread. To ensure there are no other conflicting dtl users (example: debugfs dtl or /proc/powerpc/vcpudispatch_stats), interface added code to use "down_write_trylock" call to take the dtl_access_lock. The dtl_access_lock is defined in dtl.h file. Also added global reference count variable called "dtl_global_refc", to ensure dtl data can be captured per-cpu. Code also added global lock called "dtl_global_lock" to avoid race condition. Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Tested-by: Tejas Manhas <tejas05@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250915102947.26681-3-atrajeev@linux.ibm.com |
||
Aboorva Devarajan
|
2dc019ca39 |
powerpc/time: Expose boot_tb via accessor
- Define accessor function get_boot_tb() to safely return boot_tb value, this is only needed when running in SPLPAR environments, so the accessor is built conditionally under CONFIG_PPC_SPLPAR. - Tag boot_tb as __ro_after_init since it is written once at initialized and never updated afterwards. Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com> Tested-by: Tejas Manhas <tejas05@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250915102947.26681-2-atrajeev@linux.ibm.com |
||
Vishal Moola (Oracle)
|
57fd554c07 |
powerpc: stop calling page_address() in free_pages()
free_pages() should be used when we only have a virtual address. We should call __free_pages() directly on our page instead. Link: https://lkml.kernel.org/r/20250903185921.1785167-6-vishal.moola@gmail.com Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Justin Sanders <justin@coraid.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |