[ Upstream commit aaf3bc0265 ]
m2m_hw_period is initialized only when chan_config->m2m_hw is true. This
triggers a warning:
‘m2m_hw_period’ may be used uninitialized [-Wmaybe-uninitialized]
Although m2m_hw_period is only used when chan_config->m2m_hw is true and
ignored otherwise, initialize it unconditionally to 0.
ccr is initialized by stm32_mdma_set_xfer_param() when the sg list is not
empty. This triggers a warning:
‘ccr’ may be used uninitialized [-Wmaybe-uninitialized]
Indeed, it could be used uninitialized if the sg list is empty. Initialize
it to 0.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Clément Le Goffic <legoffic.clement@gmail.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251217-mdma_warnings_fix-v2-1-340200e0bb55@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7178c3586a ]
maxburst, as provided by the client, specifies the largest amount of
data that is allowed to be transferred in one burst. This limit is
normally provided to avoid a data burst overflowing the target FIFO.
It does not mean that the DMA engine can only do bursts in that size.
Let the driver pick the largest supported burst length within the
given limit. This lets the driver work correctly with some clients that
give a large maxburst value. In particular, the 8250_dw driver will give
a quarter of the UART's FIFO size as maxburst. On some systems the FIFO
size is 256 bytes, giving a maxburst of 64 bytes, while the hardware
only supports bursts of up to 16 bytes.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251221080450.1813479-1-wens@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d41ed4ea4 ]
Without module_platform_driver(), stm32-dma3 doesn't have a
module_exit procedure. Once stm32-dma3 module is inserted, it
can't be removed, marked busy.
Use module_platform_driver() instead of subsys_initcall() to register
(insmod) and unregister (rmmod) stm32-dma3 driver.
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251121-dma3_improv-v2-1-76a207b13ea6@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 666c53e94c ]
The clocks in fsl_edma_engine::muxclk are allocated and enabled with
devm_clk_get_enabled(), which automatically cleans these resources up,
but these clocks are also manually disabled in fsl_edma_remove(). This
causes warnings on driver removal for each clock:
edma_module already disabled
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1200 clk_core_disable+0x198/0x1c8
[...]
Call trace:
clk_core_disable+0x198/0x1c8 (P)
clk_disable+0x34/0x58
fsl_edma_remove+0x74/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
edma_module already unprepared
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1059 clk_core_unprepare+0x1f8/0x220
[...]
Call trace:
clk_core_unprepare+0x1f8/0x220 (P)
clk_unprepare+0x34/0x58
fsl_edma_remove+0x7c/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
Fix these warnings by removing the unnecessary fsl_disable_clocks() call
in fsl_edma_remove().
Fixes: a9903de3aa ("dmaengine: fsl-edma: refactor using devm_clk_get_enabled")
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113-fsl-edma-clock-removal-v1-1-2025b49e7bcc@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbcbafb99d ]
For HW scatter gather transfers we still need to look for the queue. The
HW is capable of queueing 3 concurrent transfers and if we try more than
that we'll get the submit queue full and should return. Otherwise, if we
go ahead and program the new transfer, we end up discarding it.
Fixes: e97dc74359 ("dmaengine: axi-dmac: Add support for scatter-gather transfers")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
base-commit: 3980351785
change-id: 20251104-axi-dmac-fixes-and-improvs-e3ad512a329c
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://patch.msgid.link/20251104-axi-dmac-fixes-and-improvs-v1-2-3e6fd9328f72@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bd257181f ]
If 'hw_cyclic' is false we should still be able to do cyclic transfers in
"software". That was not working for the case where 'desc->num_sgs' is 1
because 'chan->next_desc' is never set with the current desc which means
that the cyclic transfer only runs once and in the next SOT interrupt we
do nothing since vchan_next_desc() will return NULL.
Fix it by setting 'chan->next_desc' as soon as we get a new desc via
vchan_next_desc().
Fixes: 0e3b67b348 ("dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
base-commit: 3980351785
change-id: 20251104-axi-dmac-fixes-and-improvs-e3ad512a329c
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://patch.msgid.link/20251104-axi-dmac-fixes-and-improvs-v1-1-3e6fd9328f72@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58ab9d7b66 ]
The VFF_4G_SUPPORT register is named differently in datasheets,
and its name is "VFF_ADDR2"; was this named correctly from the
beginning it would've been clearer that there was a mistake in
the programming sequence.
This register is supposed to hold the high bits to support the
DMA addressing above 4G (so, more than 32 bits) and not a bit
to "enable" the support for VFF 4G.
Fix the name of this register, and also fix its usage by writing
the upper 32 bits of the dma_addr_t on it when the SoC supports
such feature.
Fixes: 9135408c3a ("dmaengine: mediatek: Add MediaTek UART APDMA support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251113122229.23998-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a143545855 ]
Add proper locking in mmp_pdma_residue() to prevent use-after-free when
accessing descriptor list and descriptor contents.
The race occurs when multiple threads call tx_status() while the tasklet
on another CPU is freeing completed descriptors:
CPU 0 CPU 1
----- -----
mmp_pdma_tx_status()
mmp_pdma_residue()
-> NO LOCK held
list_for_each_entry(sw, ..)
DMA interrupt
dma_do_tasklet()
-> spin_lock(&desc_lock)
list_move(sw->node, ...)
spin_unlock(&desc_lock)
| dma_pool_free(sw) <- FREED!
-> access sw->desc <- UAF!
This issue can be reproduced when running dmatest on the same channel with
multiple threads (threads_per_chan > 1).
Fix by protecting the chain_running list iteration and descriptor access
with the chan->desc_lock spinlock.
Signed-off-by: Juan Li <lijuan@linux.spacemit.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://patch.msgid.link/20251216-mmp-pdma-race-v1-1-976a224bb622@riscstar.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 383d89699c upstream.
In 2009, commit c82f63e411 ("PCI: check saved state before restore")
changed the behavior of pci_restore_state() such that it became necessary
to call pci_save_state() afterwards, lest recovery from subsequent PCI
errors fails.
The commit has just been reverted and so all the pci_save_state() after
pci_restore_state() calls that have accumulated in the tree are now
superfluous. Drop them.
Two drivers chose a different approach to achieve the same result:
drivers/scsi/ipr.c and drivers/net/ethernet/intel/e1000e/netdev.c set the
pci_dev's "state_saved" flag to true before calling pci_restore_state().
Drop this as well.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # qat
Link: https://patch.msgid.link/c2b28cc4defa1b743cf1dedee23c455be98b397a.1760274044.git.lukas@wunner.de
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 430f7803b6 upstream.
Make sure to drop the reference taken when looking up the UDMA platform
device.
Note that holding a reference to a platform device does not prevent its
driver data from going away so there is no point in keeping the
reference after the lookup helper returns.
Fixes: d702419134 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users")
Fixes: 1438cde8fe ("dmaengine: ti: k3-udma: add missing put_device() call in of_xudma_dev_get()")
Cc: stable@vger.kernel.org # 5.6: 1438cde8fe
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-17-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fc17b1c6d upstream.
Make sure to drop the reference taken when looking up the crossbar
platform device during am335x route allocation.
Fixes: 42dbdcc6bf ("dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx")
Cc: stable@vger.kernel.org # 4.4
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-15-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc7e44db01 upstream.
Make sure to drop the reference taken when looking up the crossbar
platform device during dra7x route allocation.
Note that commit 615a4bfc42 ("dmaengine: ti: Add missing put_device in
ti_dra7_xbar_route_allocate") fixed the leak in the error paths but the
reference is still leaking on successful allocation.
Fixes: a074ae38f8 ("dmaengine: Add driver for TI DMA crossbar on DRA7x")
Fixes: 615a4bfc42 ("dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate")
Cc: stable@vger.kernel.org # 4.2: 615a4bfc42
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-14-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1b590a590 upstream.
Make sure to drop the reference taken to the DMA master OF node also on
late route allocation failures.
Fixes: df7e762db5 ("dmaengine: Add STM32 DMAMUX driver")
Cc: stable@vger.kernel.org # 4.15
Cc: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251117161258.10679-12-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd6e494388 upstream.
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: df7e762db5 ("dmaengine: Add STM32 DMAMUX driver")
Cc: stable@vger.kernel.org # 4.15
Cc: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251117161258.10679-11-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 747213b08a upstream.
After audio full duplex testing, playing the recorded file contains a few
playback frames from the previous time. The rz_dmac_terminate_all() does
not reset all the hardware descriptors queued previously, leading to the
wrong descriptor being picked up during the next DMA transfer. Fix the
above issue by resetting all the descriptor headers for a channel in
rz_dmac_terminate_all() as rz_dmac_lmdesc_recycle() points to the proper
descriptor header filled by the rz_dmac_prepare_descs_for_slave_sg().
Cc: stable@kernel.org
Fixes: 5000d37042 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251113195052.564338-1-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9fb4903239 upstream.
Make sure to drop the reference taken when looking up the ICU device
during probe also on probe failures (e.g. probe deferral).
Fixes: 7de873201c ("dmaengine: sh: rz-dmac: Add RZ/V2H(P) support")
Cc: stable@vger.kernel.org # 6.16
Cc: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://patch.msgid.link/20251117161258.10679-10-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f747004bb upstream.
Fix a memory leak in gpi_peripheral_config() where the original memory
pointed to by gchan->config could be lost if krealloc() fails.
The issue occurs when:
1. gchan->config points to previously allocated memory
2. krealloc() fails and returns NULL
3. The function directly assigns NULL to gchan->config, losing the
reference to the original memory
4. The original memory becomes unreachable and cannot be freed
Fix this by using a temporary variable to hold the krealloc() result
and only updating gchan->config when the allocation succeeds.
Found via static analysis and code review.
Fixes: 5d0c3533a1 ("dmaengine: qcom: Add GPI dma driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251029123421.91973-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9847e6d1d upstream.
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 5d318b5959 ("dmaengine: Add dma router for pl08x in LPC32XX SoC")
Cc: stable@vger.kernel.org # 6.12
Cc: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251117161258.10679-9-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4d63059de upstream.
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: e5f4ae84be ("dmaengine: add driver for lpc18xx dmamux")
Cc: stable@vger.kernel.org # 4.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251117161258.10679-8-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 799900f017 upstream.
Make sure to drop the reference taken when looking up the idxd device as
part of the compat bind and unbind sysfs interface.
Fixes: 6e7f3ee97b ("dmaengine: idxd: move dsa_drv support to compatible mode")
Cc: stable@vger.kernel.org # 5.15
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-7-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b18cd8b210 upstream.
When fsl_edma_alloc_chan_resources() fails after clk_prepare_enable(),
the error paths only free IRQs and destroy the TCD pool, but forget to
call clk_disable_unprepare(). This causes the channel clock to remain
enabled, leaking power and resources.
Fix it by disabling the channel clock in the error unwind path.
Fixes: d8d4355861 ("dmaengine: fsl-edma: add i.MX8ULP edma support")
Cc: stable@vger.kernel.org
Suggested-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251014090522.827726-1-zhen.ni@easystack.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec25e60f9f upstream.
Make sure to drop the reference taken to the DMA master OF node also on
late route allocation failures.
Fixes: 134d9c52fc ("dmaengine: dw: dmamux: Introduce RZN1 DMA router support")
Cc: stable@vger.kernel.org # 5.19
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20251117161258.10679-6-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7bb7d696e0 upstream.
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: db7d07b5ad ("dmaengine: add driver for Sophgo CV18XX/SG200X dmamux")
Cc: stable@vger.kernel.org # 6.17
Cc: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-5-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c3a46ebf1 upstream.
Make sure to drop the reference taken when looking up the mailbox device
during probe on probe failures and on driver unbind.
Fixes: 743e1c8ffe ("dmaengine: Add Broadcom SBA RAID driver")
Cc: stable@vger.kernel.org # 4.13
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-4-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9074b2d7a upstream.
Make sure to drop the reference taken when looking up the DMA platform
device during of_dma_xlate() when releasing channel resources.
Note that commit 3832b78b3e ("dmaengine: at_hdmac: add missing
put_device() call in at_dma_xlate()") fixed the leak in a couple of
error paths but the reference is still leaking on successful allocation.
Fixes: bbe89c8e3d ("at_hdmac: move to generic DMA binding")
Fixes: 3832b78b3e ("dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate()")
Cc: stable@vger.kernel.org # 3.10: 3832b78b3e
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-2-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2e1136acf8 ]
The dma_pool created by dma_pool_create() is not destroyed when
dma_async_device_register() or of_dma_controller_register() fails,
causing a resource leak in the probe error paths.
Add dma_pool_destroy() in both error paths to properly release the
allocated dma_pool resource.
Fixes: 7bedaa5537 ("dmaengine: add OMAP DMA engine driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251103073018.643-1-vulab@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0732fe787 ]
When device tree lacks optional "xlnx,addrwidth" property, the addr_width
variable remained uninitialized with garbage values, causing incorrect
DMA mask configuration and subsequent probe failure. The fix ensures a
fallback to the default 32-bit address width when this property is missing.
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Fixes: b72db4005f ("dmaengine: vdma: Add 64 bit addressing support to the driver")
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Folker Schwesinger <dev@folker-schwesinger.de>
Link: https://patch.msgid.link/20251021183006.3434495-1-suraj.gupta2@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2efd07a7c3 ]
A use-after-free bug exists in the Tegra ADMA driver when audio streams
are terminated, particularly during XRUN conditions. The issue occurs
when the DMA buffer is freed by tegra_adma_terminate_all() before the
vchan completion tasklet finishes accessing it.
The race condition follows this sequence:
1. DMA transfer completes, triggering an interrupt that schedules the
completion tasklet (tasklet has not executed yet)
2. Audio playback stops, calling tegra_adma_terminate_all() which
frees the DMA buffer memory via kfree()
3. The scheduled tasklet finally executes, calling vchan_complete()
which attempts to access the already-freed memory
Since tasklets can execute at any time after being scheduled, there is
no guarantee that the buffer will remain valid when vchan_complete()
runs.
Fix this by properly synchronizing the virtual channel completion:
- Calling vchan_terminate_vdesc() in tegra_adma_stop() to mark the
descriptors as terminated instead of freeing the descriptor.
- Add the callback tegra_adma_synchronize() that calls
vchan_synchronize() which kills any pending tasklets and frees any
terminated descriptors.
Crash logs:
[ 337.427523] BUG: KASAN: use-after-free in vchan_complete+0x124/0x3b0
[ 337.427544] Read of size 8 at addr ffff000132055428 by task swapper/0/0
[ 337.427562] Call trace:
[ 337.427564] dump_backtrace+0x0/0x320
[ 337.427571] show_stack+0x20/0x30
[ 337.427575] dump_stack_lvl+0x68/0x84
[ 337.427584] print_address_description.constprop.0+0x74/0x2b8
[ 337.427590] kasan_report+0x1f4/0x210
[ 337.427598] __asan_load8+0xa0/0xd0
[ 337.427603] vchan_complete+0x124/0x3b0
[ 337.427609] tasklet_action_common.constprop.0+0x190/0x1d0
[ 337.427617] tasklet_action+0x30/0x40
[ 337.427623] __do_softirq+0x1a0/0x5c4
[ 337.427628] irq_exit+0x110/0x140
[ 337.427633] handle_domain_irq+0xa4/0xe0
[ 337.427640] gic_handle_irq+0x64/0x160
[ 337.427644] call_on_irq_stack+0x20/0x4c
[ 337.427649] do_interrupt_handler+0x7c/0x90
[ 337.427654] el1_interrupt+0x30/0x80
[ 337.427659] el1h_64_irq_handler+0x18/0x30
[ 337.427663] el1h_64_irq+0x7c/0x80
[ 337.427667] cpuidle_enter_state+0xe4/0x540
[ 337.427674] cpuidle_enter+0x54/0x80
[ 337.427679] do_idle+0x2e0/0x380
[ 337.427685] cpu_startup_entry+0x2c/0x70
[ 337.427690] rest_init+0x114/0x130
[ 337.427695] arch_call_rest_init+0x18/0x24
[ 337.427702] start_kernel+0x380/0x3b4
[ 337.427706] __primary_switched+0xc0/0xc8
Fixes: f46b195799 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
Signed-off-by: Sheetal <sheetal@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251110142445.3842036-1-sheetal@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7d436a6c1 ]
The max_register field is assigned the size of the register memory
region instead of the offset of the last register.
The result is that reading from the regmap via debugfs can cause
a segmentation fault:
tail /sys/kernel/debug/regmap/xdma.1.auto/registers
Unable to handle kernel paging request at virtual address ffff800082f70000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
[...]
Call trace:
regmap_mmio_read32le+0x10/0x30
_regmap_bus_reg_read+0x74/0xc0
_regmap_read+0x68/0x198
regmap_read+0x54/0x88
regmap_read_debugfs+0x140/0x380
regmap_map_read_file+0x30/0x48
full_proxy_read+0x68/0xc8
vfs_read+0xcc/0x310
ksys_read+0x7c/0x120
__arm64_sys_read+0x24/0x40
invoke_syscall.constprop.0+0x64/0x108
do_el0_svc+0xb0/0xd8
el0_svc+0x38/0x130
el0t_64_sync_handler+0x120/0x138
el0t_64_sync+0x194/0x198
Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000)
---[ end trace 0000000000000000 ]---
note: tail[1217] exited with irqs disabled
note: tail[1217] exited with preempt_count 1
Segmentation fault
Fixes: 17ce252266 ("dmaengine: xilinx: xdma: Add xilinx xdma driver")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49400b701e ]
The driver's existing logic for setting the DMA mask for "marvell,pdma-1.0"
was flawed. It incorrectly relied on pdev->dev->coherent_dma_mask instead
of declaring the hardware's fixed addressing capability. A cleaner and
more correct approach is to define the mask directly based on the hardware
limitations.
The MMP/PXA PDMA controller is a 32-bit DMA engine. This is supported by
datasheets and various dtsi files for PXA25x, PXA27x, PXA3xx, and MMP2,
all of which are 32-bit systems.
This patch simplifies the driver's logic by replacing the 'u64 dma_mask'
field with a simpler 'u32 dma_width' to store the addressing capability
in bits. The complex if/else block in probe() is then replaced with a
single, clear call to dma_set_mask_and_coherent(). This sets a fixed
32-bit DMA mask for "marvell,pdma-1.0" and a 64-bit mask for
"spacemit,k1-pdma," matching each device's hardware capabilities.
Finally, this change also works around a specific build error encountered
with clang-20 on x86_64 allyesconfig. The shift-count-overflow error is
caused by a known clang compiler issue where the DMA_BIT_MASK(n) macro's
ternary operator is not correctly evaluated in static initializers. By
moving the macro's evaluation into the probe() function, the driver avoids
this compiler bug.
Fixes: 5cfe585d86 ("dmaengine: mmp_pdma: Add SpacemiT K1 PDMA support with 64-bit addressing")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/lkml/CA+G9fYsPcMfW-e_0_TRqu4cnwqOqYF3aJOeKUYk6Z4qRStdFvg@mail.gmail.com
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
New support:
- Intel idxd Wildcat Lake family support
- SpacemiT K1 PDMA controller support
- Renesas RZ/G3E family support
Updates:
- Xilinx shutdown support and dma client properties update
- Designware edma callback_result support
-----BEGIN PGP SIGNATURE-----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=C5z7
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A couple of new device support and small driver updates for this
round.
New support:
- Intel idxd Wildcat Lake family support
- SpacemiT K1 PDMA controller support
- Renesas RZ/G3E family support
Updates:
- Xilinx shutdown support and dma client properties update
- Designware edma callback_result support"
* tag 'dmaengine-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dt-bindings: dma: rz-dmac: Document RZ/G3E family of SoCs
dmaengine: dw-edma: Set status for callback_result
dmaengine: mv_xor: match alloc_wc and free_wc
dmaengine: mmp_pdma: Add SpacemiT K1 PDMA support with 64-bit addressing
dmaengine: mmp_pdma: Add operations structure for controller abstraction
dmaengine: mmp_pdma: Add reset controller support
dmaengine: mmp_pdma: Add clock support
dt-bindings: dma: Add SpacemiT K1 PDMA controller
dt-bindings: dmaengine: xilinx_dma: Remove DMA client properties
dmaengine: Fix dma_async_tx_descriptor->tx_submit documentation
dmaengine: xilinx_dma: Support descriptor setup from dma_vecs
dmaengine: sh: setup_xref error handling
dmaengine: Replace zero-length array with flexible-array
dmaengine: ppc4xx: Remove space before newline
dmaengine: idxd: Add a new IAA device ID for Wildcat Lake family platforms
dmaengine: idxd: Replace memset(0) + strscpy() with strscpy_pad()
dt-bindings: dma: nvidia,tegra20-apbdma: Add undocumented compatibles and "clock-names"
dmaengine: zynqmp_dma: Add shutdown operation support
- Use fdinfo to expose the sysfs path of a device represented by a
vfio device file. (Alex Mastro)
- Mark vfio-fsl-mc, vfio-amba, and the reset functions for
vfio-platform for removal as these are either orphaned or believed
to be unused. (Alex Williamson)
- Add reviewers for vfio-platform to save it from also being marked
for removal. (Mostafa Saleh, Pranjal Shrivastava)
- VFIO selftests, including basic sanity testing and minimal userspace
drivers for testing against real hardware. This is also expected to
provide integration with KVM selftests for KVM-VFIO interfaces.
(David Matlack, Josh Hilke)
- Fix drivers/cdx and vfio/cdx to build without CONFIG_GENERIC_MSI_IRQ.
(Nipun Gupta)
- Fix reference leak in hisi_acc. (Miaoqian Lin)
- Use consistent return for unsupported device feature. (Alex Mastro)
- Unwind using the correct memory free callback in vfio/pds.
(Zilin Guan)
- Use IRQ_DISABLE_LAZY flag to improve handling of pre-PCI2.3 INTx
and resolve stalled interrupt on ppc64. (Timothy Pearson)
- Enable GB300 in nvgrace-gpu vfio-pci variant driver. (Tushar Dave)
- Misc:
- Drop unnecessary ternary conversion in vfio/pci. (Xichao Zhao)
- Grammatical fix in nvgrace-gpu. (Morduan Zang)
- Update Shameer's email address. (Shameer Kolothum)
- Fix document build warning. (Alex Williamson)
-----BEGIN PGP SIGNATURE-----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=E6Zs
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.18-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Use fdinfo to expose the sysfs path of a device represented by a vfio
device file (Alex Mastro)
- Mark vfio-fsl-mc, vfio-amba, and the reset functions for
vfio-platform for removal as these are either orphaned or believed to
be unused (Alex Williamson)
- Add reviewers for vfio-platform to save it from also being marked for
removal (Mostafa Saleh, Pranjal Shrivastava)
- VFIO selftests, including basic sanity testing and minimal userspace
drivers for testing against real hardware. This is also expected to
provide integration with KVM selftests for KVM-VFIO interfaces (David
Matlack, Josh Hilke)
- Fix drivers/cdx and vfio/cdx to build without CONFIG_GENERIC_MSI_IRQ
(Nipun Gupta)
- Fix reference leak in hisi_acc (Miaoqian Lin)
- Use consistent return for unsupported device feature (Alex Mastro)
- Unwind using the correct memory free callback in vfio/pds (Zilin
Guan)
- Use IRQ_DISABLE_LAZY flag to improve handling of pre-PCI2.3 INTx and
resolve stalled interrupt on ppc64 (Timothy Pearson)
- Enable GB300 in nvgrace-gpu vfio-pci variant driver (Tushar Dave)
- Misc:
- Drop unnecessary ternary conversion in vfio/pci (Xichao Zhao)
- Grammatical fix in nvgrace-gpu (Morduan Zang)
- Update Shameer's email address (Shameer Kolothum)
- Fix document build warning (Alex Williamson)
* tag 'vfio-v6.18-rc1' of https://github.com/awilliam/linux-vfio: (48 commits)
vfio/nvgrace-gpu: Add GB300 SKU to the devid table
vfio/pci: Fix INTx handling on legacy non-PCI 2.3 devices
vfio/pds: replace bitmap_free with vfree
vfio: return -ENOTTY for unsupported device feature
hisi_acc_vfio_pci: Fix reference leak in hisi_acc_vfio_debug_init
vfio/platform: Mark reset drivers for removal
vfio/amba: Mark for removal
MAINTAINERS: Add myself as VFIO-platform reviewer
MAINTAINERS: Add myself as VFIO-platform reviewer
docs: proc.rst: Fix VFIO Device title formatting
vfio: selftests: Fix .gitignore for already tracked files
vfio/cdx: update driver to build without CONFIG_GENERIC_MSI_IRQ
cdx: don't select CONFIG_GENERIC_MSI_IRQ
MAINTAINERS: Update Shameer Kolothum's email address
vfio: selftests: Add a script to help with running VFIO selftests
vfio: selftests: Make iommufd the default iommu_mode
vfio: selftests: Add iommufd mode
vfio: selftests: Add iommufd_compat_type1{,v2} modes
vfio: selftests: Add vfio_type1v2_mode
vfio: selftests: Replicate tests across all iommu_modes
...
The reference taken by of_find_device_by_node()
must be released when not needed anymore.
Add missing put_device() call to fix device reference leaks.
Fixes: 134d9c52fc ("dmaengine: dw: dmamux: Introduce RZN1 DMA router support")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20250902090358.2423285-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DMA Engine has support for the callback_result which provides
the status of the request and the residue. This helps in
determining the correct status of the request and in
efficient resource management of the request.
The 'callback_result' method is preferred over the deprecated
'callback' method.
Signed-off-by: Devendra K Verma <devverma@amd.com>
Link: https://lore.kernel.org/r/20250821121505.318179-1-devverma@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for SpacemiT K1 PDMA controller which features 64-bit
addressing capabilities.
The SpacemiT K1 PDMA extends the descriptor format with additional
32-bit words for high address bits, enabling access to memory beyond
4GB boundaries. The new spacemit_k1_pdma_ops provides necessary 64-bit
address handling functions and k1 specific controller configurations.
Key changes:
- Add ARCH_SPACEMIT dependency to Kconfig
- Define new high 32-bit address registers (DDADRH, DSADRH, DTADRH)
- Add DCSR_LPAEEN bit for Long Physical Address Extension Enable
- Implement 64-bit operations for SpacemiT K1 PDMA
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20250822-working_dma_0701_v2-v5-5-f5c0eda734cc@riscstar.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support to acquire and deassert an optional hardware reset controller
during mmp_pdma_probe(). It is optional because in Marvell devices
such as "marvell,pdma-1.0" the resets property is not a required
property. But in SpacemiT K1 PDMA, "spacemit,k1-pdma" as the dt
binding schema file stated, resets is required.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20250822-working_dma_0701_v2-v5-3-f5c0eda734cc@riscstar.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for retrieving and enabling an optional clock during
mmp_pdma_probe(). It is optional because in Marvell devices
such as "marvell,pdma-1.0" the clocks property is not a required
property. But in SpacemiT K1 PDMA, "spacemit,k1-pdma" as the dt
binding schema file stated, clocks is required.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20250822-working_dma_0701_v2-v5-2-f5c0eda734cc@riscstar.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMAEngine provides an interface for obtaining DMA transaction
descriptors from an array of scatter gather buffers represented by
struct dma_vec. This interface is used in the DMABUF API of the IIO
framework [1][2].
To enable DMABUF support through the IIO framework for the Xilinx DMA,
implement callback .device_prep_peripheral_dma_vec() of struct
dma_device in the driver.
[1]: 7a86d46998 ("iio: buffer-dmaengine: Support new DMABUF based userspace API")
[2]: 5878853fc9 ("dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()")
Signed-off-by: Folker Schwesinger <dev@folker-schwesinger.de>
Reviewed-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/DCCKQLKOZC06.2H6LJ8RJQJNV2@folker-schwesinger.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch modifies the type of setup_xref from void to int and handles
errors since the function can fail.
`setup_xref` now returns the (eventual) error from
`dmae_set_dmars`|`dmae_set_chcr`, while `shdma_tx_submit` handles the
result, removing the chunks from the queue and marking PM as idle in
case of an error.
Signed-off-by: Thomas Andreatta <thomas.andreatta2000@gmail.com>
Link: https://lore.kernel.org/r/20250827152442.90962-1-thomas.andreatta2000@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix a critical memory allocation bug in edma_setup_from_hw() where
queue_priority_map was allocated with insufficient memory. The code
declared queue_priority_map as s8 (*)[2] (pointer to array of 2 s8),
but allocated memory using sizeof(s8) instead of the correct size.
This caused out-of-bounds memory writes when accessing:
queue_priority_map[i][0] = i;
queue_priority_map[i][1] = i;
The bug manifested as kernel crashes with "Oops - undefined instruction"
on ARM platforms (BeagleBoard-X15) during EDMA driver probe, as the
memory corruption triggered kernel hardening features on Clang.
Change the allocation to use sizeof(*queue_priority_map) which
automatically gets the correct size for the 2D array structure.
Fixes: 2b6b3b7420 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20250830094953.3038012-1-anders.roxell@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Documentation/process/deprecated.rst suggests that zero-length
and one-element arrays are deprecated, flexible-array members
should be used instead.
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Link: https://lore.kernel.org/r/20250830132633.1803300-1-chelsyratnawat2001@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Allow drivers/dma/idxd/registers.h to be included from userspace in
tools/ by adjusting the include path to uapi/linux/idxd.h if __KERNEL__
is not defined.
A subsequent commit will use registers.h to implement a userspace driver
for Intel DSA devices in tools/testing/selftests/vfio.
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-22-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Move the function prototype for system_has_dca_enabled() from hw.h to
dma.h. This allows hw.h to be included from tools/, which will be used
in a subsysequent commit to implement a userspace driver for Intel CBDMA
devices in tools/testing/selftests/vfio.
No functional change intended.
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-19-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
A new IAA device ID, 0xfd2d, is introduced across all Wildcat Lake
family platforms. Add the device ID to the IDXD driver.
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250801215936.188555-1-vinicius.gomes@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The clean up in idxd_setup_wqs() has had a couple bugs because the error
handling is a bit subtle. It's simpler to just re-write it in a cleaner
way. The issues here are:
1) If "idxd->max_wqs" is <= 0 then we call put_device(conf_dev) when
"conf_dev" hasn't been initialized.
2) If kzalloc_node() fails then again "conf_dev" is invalid. It's
either uninitialized or it points to the "conf_dev" from the
previous iteration so it leads to a double free.
It's better to free partial loop iterations within the loop and then
the unwinding at the end can handle whole loop iterations. I also
renamed the labels to describe what the goto does and not where the goto
was located.
Fixes: 3fd2f4bc01 ("dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqs")
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Closes: https://lore.kernel.org/all/20250811095836.1642093-1-colin.i.king@gmail.com/
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/aJnJW3iYTDDCj9sk@stanley.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Replace memset(0) followed by strscpy() with strscpy_pad() to improve
idxd_load_iaa_device_defaults(). This avoids zeroing the memory before
copying the strings and ensures the destination buffers are only written
to once, simplifying the code and improving efficiency.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250810225858.2953-2-thorsten.blum@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
