[ Upstream commit 70ca8caa96 ]
On a multipath SAS system some devices don't end up with correct symlinks
from the SCSI device to its enclosure. Some devices even have enclosure
links pointing to enclosures attached to different SCSI hosts.
ses_match_to_enclosure() calls enclosure_for_each_device() which iterates
over all enclosures on the system, not just enclosures attached to the
current SCSI host.
Replace the iteration with a direct call to ses_enclosure_find_by_addr().
Reviewed-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://patch.msgid.link/20260210191850.36784-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa96392ebe ]
The driver encountered a crash during resource cleanup when the reply and
request queues were NULL due to freed memory. This issue occurred when the
creation of reply or request queues failed, and the driver freed the memory
first, but attempted to mem set the content of the freed memory, leading to
a system crash.
Add NULL pointer checks for reply and request queues before accessing the
reply/request memory during cleanup
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260212070026.30263-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1ac22c8eae upstream.
This leak will cause a hang when tearing down the SCSI host. For example,
iscsid hangs with the following call trace:
[130120.652718] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
PID: 2528 TASK: ffff9d0408974e00 CPU: 3 COMMAND: "iscsid"
#0 [ffffb5b9c134b9e0] __schedule at ffffffff860657d4
#1 [ffffb5b9c134ba28] schedule at ffffffff86065c6f
#2 [ffffb5b9c134ba40] schedule_timeout at ffffffff86069fb0
#3 [ffffb5b9c134bab0] __wait_for_common at ffffffff8606674f
#4 [ffffb5b9c134bb10] scsi_remove_host at ffffffff85bfe84b
#5 [ffffb5b9c134bb30] iscsi_sw_tcp_session_destroy at ffffffffc03031c4 [iscsi_tcp]
#6 [ffffb5b9c134bb48] iscsi_if_recv_msg at ffffffffc0292692 [scsi_transport_iscsi]
#7 [ffffb5b9c134bb98] iscsi_if_rx at ffffffffc02929c2 [scsi_transport_iscsi]
#8 [ffffb5b9c134bbf0] netlink_unicast at ffffffff85e551d6
#9 [ffffb5b9c134bc38] netlink_sendmsg at ffffffff85e554ef
Fixes: 8fe4ce5836 ("scsi: core: Fix a use-after-free")
Cc: stable@vger.kernel.org
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223232728.93350-1-junxiao.bi@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 38353c26db ]
Commit e29c47fe89 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.
In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.
Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled.
Fixes: e29c47fe89 ("scsi: pm8001: Simplify pm8001_task_exec()")
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260213192806.439432-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bffda93a51 ]
Using set_memory_wc() to enable write-combining for the DPP portion of
the MMIO mapping is wrong as set_memory_*() is meant to operate on RAM
only, not MMIO mappings. In fact, as used currently triggers a BUG_ON()
with enabled CONFIG_DEBUG_VIRTUAL.
Simply map the DPP region separately and in addition to the already
existing mappings, avoiding any possible negative side effects for
these.
Fixes: 1351e69fc6 ("scsi: lpfc: Add push-to-adapter support to sli4")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Link: https://patch.msgid.link/20260212192327.141104-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e17f0d4cc0 ]
Some randconfig builds run into excessive stack usage with gcc-14 or
higher, which use __attribute__((cold)) where earlier versions did not do
that:
drivers/scsi/BusLogic.c: In function 'blogic_init':
drivers/scsi/BusLogic.c:2398:1: error: the frame size of 1680 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
The problem is that a lot of code gets inlined into blogic_init() here. Two
functions stick out, but they are a bit different:
- blogic_init_probeinfo_list() actually uses a few hundred bytes of kernel
stack, which is a problem in combination with other functions that also
do. Marking this one as noinline means that the stack slots get get
reused between function calls
- blogic_reportconfig() has a few large variables, but whenever it is not
inlined into its caller, the compiler is actually smart enough to reuse
stack slots for these automatically, so marking it as noinline saves
most of the stack space by itself.
The combination of both of these should avoid the problem entirely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260203163321.2598593-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1982257570 ]
The error exit path when rn is NULL ends up deferencing the null pointer rn
via the use of the macro CSIO_INC_STATS. Fix this by adding a new error
return path label after the use of the macro to avoid the deference.
Fixes: a3667aaed5 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20260129155332.196338-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41b37312bd ]
pqi_report_phys_luns() fails to release the rpl_list buffer when
encountering an unsupported data format or when the allocation for
rpl_16byte_wwid_list fails. These early returns bypass the cleanup logic,
leading to memory leaks.
Consolidate the error handling by adding an out_free_rpl_list label and use
goto statements to ensure rpl_list is consistently freed on failure.
Compile tested only. Issue found using a prototype static analysis tool and
code review.
Fixes: 28ca6d876c ("scsi: smartpqi: Add extended report physical LUNs")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Tested-by: Don Brace <don.brace@microchip.com>
Acked-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20260131093641.1008117-1-zilin@seu.edu.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd81f07e9a ]
There is no added value in efct_intr_msix() compared to
irq_default_primary_handler().
Using a threaded interrupt without a dedicated primary handler mandates
the IRQF_ONESHOT flag to mask the interrupt source while the threaded
handler is active. Otherwise the interrupt can fire again before the
threaded handler had a chance to run.
Use the default primary interrupt handler by specifying NULL and set
IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: 4df84e8466 ("scsi: elx: efct: Driver initialization routines")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-8-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 42b2dab434 upstream.
Issue occurred during a continuous reboot test of several thousand
iterations specific to a fabric topo with dual mode target where it
sends a PLOGI/PRLI and then sends a LOGO. The initiator was also in the
process of discovery and sent a PLOGI to the switch. It then queried a
list of ports logged in via mbx 75h and the GPDB response indicated that
the target was logged in. This caused a mismatch in the states between
the driver and FW. Requery the FW for the state and proceed with the
rest of discovery process.
Fixes: a4239945b8 ("scsi: qla2xxx: Add switch command to simplify fabric discovery")
Cc: stable@vger.kernel.org
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-11-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8890bf450e upstream.
System crash seen during load/unload test in a loop.
[105954.384919] RBP: ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086
[105954.384920] R10: 000000000000000f R11: ffffa31240904be5 R12: ffff914605f868e0
[105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15: 00000000ddb7c000
[105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000
[105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0
[105954.384928] PKRU: 55555554
[105954.384929] Call Trace:
[105954.384931] <IRQ>
[105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx]
[105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx]
[105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx]
[105954.384999] ? __wake_up_common+0x80/0x190
[105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx]
[105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx]
[105954.385040] ? __handle_irq_event_percpu+0x3d/0x190
[105954.385044] ? handle_irq_event+0x58/0xb0
[105954.385046] ? handle_edge_irq+0x93/0x240
[105954.385050] ? __common_interrupt+0x41/0xa0
[105954.385055] ? common_interrupt+0x3e/0xa0
[105954.385060] ? asm_common_interrupt+0x22/0x40
The root cause of this was that there was a free (dma_free_attrs) in the
interrupt context. There was a device discovery/fabric scan in
progress. A module unload was issued which set the UNLOADING flag. As
part of the discovery, after receiving an interrupt a work queue was
scheduled (which involved a work to be queued). Since the UNLOADING
flag is set, the work item was not allocated and the mapped memory had
to be freed. The free occurred in interrupt context leading to system
crash. Delay the driver unload until the fabric scan is complete to
avoid the crash.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/202512090414.07Waorz0-lkp@intel.com/
Fixes: 783e0dc4f6 ("qla2xxx: Check for device state before unloading the driver.")
Cc: stable@vger.kernel.org
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-8-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 383d89699c upstream.
In 2009, commit c82f63e411 ("PCI: check saved state before restore")
changed the behavior of pci_restore_state() such that it became necessary
to call pci_save_state() afterwards, lest recovery from subsequent PCI
errors fails.
The commit has just been reverted and so all the pci_save_state() after
pci_restore_state() calls that have accumulated in the tree are now
superfluous. Drop them.
Two drivers chose a different approach to achieve the same result:
drivers/scsi/ipr.c and drivers/net/ethernet/intel/e1000e/netdev.c set the
pci_dev's "state_saved" flag to true before calling pci_restore_state().
Drop this as well.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # qat
Link: https://patch.msgid.link/c2b28cc4defa1b743cf1dedee23c455be98b397a.1760274044.git.lukas@wunner.de
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56bd3c0f74 upstream.
Earlier in the function, the ha->flt buffer is allocated with size
sizeof(struct qla_flt_header) + FLT_REGIONS_SIZE but freed in the error
path with size SFP_DEV_SIZE.
Fixes: 84318a9f01 ("scsi: qla2xxx: edif: Add send, receive, and accept for auth_els")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260112134326.55466-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4747bafaa5 upstream.
If nonemb_cmd->va fails to be allocated, free the allocation previously
made by alloc_mcc_wrb().
Fixes: 50a4b824be ("scsi: be2iscsi: Fix to make boot discovery non-blocking")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Link: https://patch.msgid.link/20251213083643.301240-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 19bc5f2a69 ]
In qla27xx_copy_fpin_pkt() and qla27xx_copy_multiple_pkt(), the frame_size
reported by firmware is used to calculate the copy length into
item->iocb. However, the iocb member is defined as a fixed-size 64-byte
array within struct purex_item.
If the reported frame_size exceeds 64 bytes, subsequent memcpy calls will
overflow the iocb member boundary. While extra memory might be allocated,
this cross-member write is unsafe and triggers warnings under
CONFIG_FORTIFY_SOURCE.
Fix this by capping total_bytes to the size of the iocb member (64 bytes)
before allocation and copying. This ensures all copies remain within the
bounds of the destination structure member.
Fixes: 875386b988 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20260106205344.18031-1-jiashengjiangcool@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe2f8ad6f0 ]
The fragile ordering between marking commands completed or failed so
that the error handler only wakes when the last running command
completes or times out has race conditions. These race conditions can
cause the SCSI layer to fail to wake the error handler, leaving I/O
through the SCSI host stuck as the error state cannot advance.
First, there is an memory ordering issue within scsi_dec_host_busy().
The write which clears SCMD_STATE_INFLIGHT may be reordered with reads
counting in scsi_host_busy(). While the local CPU will see its own
write, reordering can allow other CPUs in scsi_dec_host_busy() or
scsi_eh_inc_host_failed() to see a raised busy count, causing no CPU to
see a host busy equal to the host_failed count.
This race condition can be prevented with a memory barrier on the error
path to force the write to be visible before counting host busy
commands.
Second, there is a general ordering issue with scsi_eh_inc_host_failed(). By
counting busy commands before incrementing host_failed, it can race with a
final command in scsi_dec_host_busy(), such that scsi_dec_host_busy() does
not see host_failed incremented but scsi_eh_inc_host_failed() counts busy
commands before SCMD_STATE_INFLIGHT is cleared by scsi_dec_host_busy(),
resulting in neither waking the error handler task.
This needs the call to scsi_host_busy() to be moved after host_failed is
incremented to close the race condition.
Fixes: 6eb045e092 ("scsi: core: avoid host-wide host_busy counter for scsi_mq")
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260113161036.6730-1-djeffery@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9eacec5d18 upstream.
The Hyper-V host does not support MODE_SENSE_10 and MODE_SENSE. The
driver handles MODE_SENSE as unsupported command, but not for
MODE_SENSE_10. Add MODE_SENSE_10 to the same handling logic and return
correct code to SCSI layer.
Fixes: 89ae7d7093 ("Staging: hv: storvsc: Move the storage driver out of the staging area")
Cc: stable@kernel.org
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20260117010302.294068-1-longli@linux.microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a49157dee upstream.
Some low-level drivers (LLD) access block layer crypto fields, such as
rq->crypt_keyslot and rq->crypt_ctx within `struct request`, to
configure hardware for inline encryption. However, SCSI Error Handling
(EH) commands (e.g., TEST UNIT READY, START STOP UNIT) should not
involve any encryption setup.
To prevent drivers from erroneously applying crypto settings during EH,
this patch saves the original values of rq->crypt_keyslot and
rq->crypt_ctx before an EH command is prepared via scsi_eh_prep_cmnd().
These fields in the 'struct request' are then set to NULL. The original
values are restored in scsi_eh_restore_cmnd() after the EH command
completes.
This ensures that the block layer crypto context does not leak into EH
command execution.
Signed-off-by: Brian Kao <powenkao@google.com>
Link: https://patch.msgid.link/20251218031726.2642834-1-powenkao@google.com
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0e16776542 ]
A race condition was found in sg_proc_debug_helper(). It was observed on
a system using an IBM LTO-9 SAS Tape Drive (ULTRIUM-TD9) and monitoring
/proc/scsi/sg/debug every second. A very large elapsed time would
sometimes appear. This is caused by two race conditions.
We reproduced the issue with an IBM ULTRIUM-HH9 tape drive on an x86_64
architecture. A patched kernel was built, and the race condition could
not be observed anymore after the application of this patch. A
reproducer C program utilising the scsi_debug module was also built by
Changhui Zhong and can be viewed here:
https://github.com/MichaelRabek/linux-tests/blob/master/drivers/scsi/sg/sg_race_trigger.c
The first race happens between the reading of hp->duration in
sg_proc_debug_helper() and request completion in sg_rq_end_io(). The
hp->duration member variable may hold either of two types of
information:
#1 - The start time of the request. This value is present while
the request is not yet finished.
#2 - The total execution time of the request (end_time - start_time).
If sg_proc_debug_helper() executes *after* the value of hp->duration was
changed from #1 to #2, but *before* srp->done is set to 1 in
sg_rq_end_io(), a fresh timestamp is taken in the else branch, and the
elapsed time (value type #2) is subtracted from a timestamp, which
cannot yield a valid elapsed time (which is a type #2 value as well).
To fix this issue, the value of hp->duration must change under the
protection of the sfp->rq_list_lock in sg_rq_end_io(). Since
sg_proc_debug_helper() takes this read lock, the change to srp->done and
srp->header.duration will happen atomically from the perspective of
sg_proc_debug_helper() and the race condition is thus eliminated.
The second race condition happens between sg_proc_debug_helper() and
sg_new_write(). Even though hp->duration is set to the current time
stamp in sg_add_request() under the write lock's protection, it gets
overwritten by a call to get_sg_io_hdr(), which calls copy_from_user()
to copy struct sg_io_hdr from userspace into kernel space. hp->duration
is set to the start time again in sg_common_write(). If
sg_proc_debug_helper() is called between these two calls, an arbitrary
value set by userspace (usually zero) is used to compute the elapsed
time.
To fix this issue, hp->duration must be set to the current timestamp
again after get_sg_io_hdr() returns successfully. A small race window
still exists between get_sg_io_hdr() and setting hp->duration, but this
window is only a few instructions wide and does not result in observable
issues in practice, as confirmed by testing.
Additionally, we fix the format specifier from %d to %u for printing
unsigned int values in sg_proc_debug_helper().
Signed-off-by: Michal Rábek <mrabek@redhat.com>
Suggested-by: Tomas Henzl <thenzl@redhat.com>
Tested-by: Changhui Zhong <czhong@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Link: https://patch.msgid.link/20251212160900.64924-1-mrabek@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 278712d20b ]
This reverts commit ab2068a6fb.
When probing the exp-attached sata device, libsas/libata will issue a
hard reset in sas_probe_sata() -> ata_sas_async_probe(), then a
broadcast event will be received after the disk probe fails, and this
commit causes the probe will be re-executed on the disk, and a faulty
disk may get into an indefinite loop of probe.
Therefore, revert this commit, although it can fix some temporary issues
with disk probe failure.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251202065627.140361-1-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d373163194 upstream.
The driver was not reading the MAX_REQ_PER_REPLY_QUEUE_LIMIT IOCFacts
flag, so the reply-queue-full handling was never enabled, even on
firmware that supports it. Reading this flag enables the feature and
prevents reply queue overflow.
Fixes: f08b24d827 ("scsi: mpi3mr: Avoid reply queue full condition")
Cc: stable@vger.kernel.org
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://patch.msgid.link/20251211002929.22071-1-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6ab594672 upstream.
The asd_pci_remove() function fails to synchronize with pending tasklets
before freeing the asd_ha structure, leading to a potential
use-after-free vulnerability.
When a device removal is triggered (via hot-unplug or module unload),
race condition can occur.
The fix adds tasklet_kill() before freeing the asd_ha structure,
ensuring all scheduled tasklets complete before cleanup proceeds.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 2908d778ab ("[SCSI] aic94xx: new driver")
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/ME2PR01MB3156AB7DCACA206C845FC7E8AFFDA@ME2PR01MB3156.ausprd01.prod.outlook.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1f7d6e2efe ]
The atomic write enable module param is "atomic_wr", and not
"atomic_write", so fix the module param description.
Fixes: 84f3a3c01d ("scsi: scsi_debug: Atomic write support")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251211100651.9056-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 957aa59749 ]
If a mailbox command completes immediately after
wait_for_completion_timeout() times out, ha->mbx_intr_comp could be left
in an inconsistent state, causing the next mailbox command not to wait
for the hardware. Fix by reinitializing the completion before use.
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/11b6485e-0bfd-4784-8f99-c06a196dad94@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f58fc64d5 ]
When given the module parameter qlini_mode=exclusive, qla2xxx in
initiator mode is initially unable to successfully send SCSI commands to
devices it finds while scanning, resulting in an escalating series of
resets until an adapter reset clears the issue. Fix by checking the
active mode instead of the module parameter.
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/1715ec14-ba9a-45dc-9cf2-d41aa6b81b5e@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f6aaade2a ]
When qla2xxx is loaded with qlini_mode=disabled,
ha->flags.disable_msix_handshake is used before it is set, resulting in
the wrong interrupt handler being used on certain HBAs
(qla2xxx_msix_rsp_q_hs() is used when qla2xxx_msix_rsp_q() should be
used). The only difference between these two interrupt handlers is that
the _hs() version writes to a register to clear the "RISC" interrupt,
whereas the other version does not. So this bug results in the RISC
interrupt being cleared when it should not be. This occasionally causes
a different interrupt handler qla24xx_msix_default() for a different
vector to see ((stat & HSRX_RISC_INT) == 0) and ignore its interrupt,
which then causes problems like:
qla2xxx [0000:02:00.0]-d04c:6: MBX Command timeout for cmd 20,
iocontrol=8 jiffies=1090c0300 mb[0-3]=[0x4000 0x0 0x40 0xda] mb7 0x500
host_status 0x40000010 hccr 0x3f00
qla2xxx [0000:02:00.0]-101e:6: Mailbox cmd timeout occurred, cmd=0x20,
mb[0]=0x20. Scheduling ISP abort
(the cmd varies; sometimes it is 0x20, 0x22, 0x54, 0x5a, 0x5d, or 0x6a)
This problem can be reproduced with a 16 or 32 Gbps HBA by loading
qla2xxx with qlini_mode=disabled and running a high IOPS test while
triggering frequent RSCN database change events.
While analyzing the problem I discovered that even with
disable_msix_handshake forced to 0, it is not necessary to clear the
RISC interrupt from qla2xxx_msix_rsp_q_hs() (more below). So just
completely remove qla2xxx_msix_rsp_q_hs() and the logic for selecting
it, which also fixes the bug with qlini_mode=disabled.
The test below describes the justification for not needing
qla2xxx_msix_rsp_q_hs():
Force disable_msix_handshake to 0:
qla24xx_config_rings():
if (0 && (ha->fw_attributes & BIT_6) && (IS_MSIX_NACK_CAPABLE(ha)) &&
(ha->flags.msix_enabled)) {
In qla24xx_msix_rsp_q() and qla2xxx_msix_rsp_q_hs(), check:
(rd_reg_dword(®->host_status) & HSRX_RISC_INT)
Count the number of calls to each function with HSRX_RISC_INT set and
the number with HSRX_RISC_INT not set while performing some I/O.
If qla2xxx_msix_rsp_q_hs() clears the RISC interrupt (original code):
qla24xx_msix_rsp_q: 50% of calls have HSRX_RISC_INT set
qla2xxx_msix_rsp_q_hs: 5% of calls have HSRX_RISC_INT set
(# of qla2xxx_msix_rsp_q_hs interrupts) =
(# of qla24xx_msix_rsp_q interrupts) * 3
If qla2xxx_msix_rsp_q_hs() does not clear the RISC interrupt (patched
code):
qla24xx_msix_rsp_q: 100% of calls have HSRX_RISC_INT set
qla2xxx_msix_rsp_q_hs: 9% of calls have HSRX_RISC_INT set
(# of qla2xxx_msix_rsp_q_hs interrupts) =
(# of qla24xx_msix_rsp_q interrupts) * 3
In the case of the original code, qla24xx_msix_rsp_q() was seeing
HSRX_RISC_INT set only 50% of the time because qla2xxx_msix_rsp_q_hs()
was clearing it when it shouldn't have been. In the patched code,
qla24xx_msix_rsp_q() sees HSRX_RISC_INT set 100% of the time, which
makes sense if that interrupt handler needs to clear the RISC interrupt
(which it does). qla2xxx_msix_rsp_q_hs() sees HSRX_RISC_INT only 9% of
the time, which is just overlap from the other interrupt during the
high IOPS test.
Tested with SCST on:
QLE2742 FW:v9.08.02 (32 Gbps 2-port)
QLE2694L FW:v9.10.11 (16 Gbps 4-port)
QLE2694L FW:v9.08.02 (16 Gbps 4-port)
QLE2672 FW:v8.07.12 (16 Gbps 2-port)
both initiator and target mode
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/56d378eb-14ad-49c7-bae9-c649b6c7691e@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07caedc6a3 ]
It's possible for an unstable link to repeatedly bounce allowing a FLOGI
retry, but then bounce again forcing an abort of the FLOGI. Ensure that
the initial reference count on the FLOGI ndlp is restored in this faulty
link scenario.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251106224639.139176-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48e6b7e708 ]
Add support for new Hurray Data controller.
All entries are in HEX.
Add PCI IDs for Hurray Data controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
9005 028f 207d 4840
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: David Strahan <David.Strahan@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20251106163823.786828-4-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab58153ec6 ]
The delayed work item 'imm_tq' is initialized in imm_attach() and
scheduled via imm_queuecommand() for processing SCSI commands. When the
IMM parallel port SCSI host adapter is detached through imm_detach(),
the imm_struct device instance is deallocated.
However, the delayed work might still be pending or executing
when imm_detach() is called, leading to use-after-free bugs
when the work function imm_interrupt() accesses the already
freed imm_struct memory.
The race condition can occur as follows:
CPU 0(detach thread) | CPU 1
| imm_queuecommand()
| imm_queuecommand_lck()
imm_detach() | schedule_delayed_work()
kfree(dev) //FREE | imm_interrupt()
| dev = container_of(...) //USE
dev-> //USE
Add disable_delayed_work_sync() in imm_detach() to guarantee proper
cancellation of the delayed work item before imm_struct is deallocated.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/20251028100149.40721-1-duoming@zju.edu.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78b1a242fe ]
In qla2xxx_process_purls_iocb(), an item is allocated via
qla27xx_copy_multiple_pkt(), which internally calls
qla24xx_alloc_purex_item().
The qla24xx_alloc_purex_item() function may return a pre-allocated item
from a per-adapter pool for small allocations, instead of dynamically
allocating memory with kzalloc().
An error handling path in qla2xxx_process_purls_iocb() incorrectly uses
kfree() to release the item. If the item was from the pre-allocated
pool, calling kfree() on it is a bug that can lead to memory corruption.
Fix this by using the correct deallocation function,
qla24xx_free_purex_item(), which properly handles both dynamically
allocated and pre-allocated items.
Fixes: 875386b988 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251113151246.762510-1-zilin@seu.edu.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acd194d9b5 ]
The driver calls ioport_map() to map I/O ports in sim710_probe_common()
but never calls ioport_unmap() to release the mapping. This causes
resource leaks in both the error path when request_irq() fails and in
the normal device removal path via sim710_device_remove().
Add ioport_unmap() calls in the out_release error path and in
sim710_device_remove().
Fixes: 56fece2008 ("[PATCH] finally fix 53c700 to use the generic iomem infrastructure")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251029032555.1476-1-vulab@iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d46c69a087 ]
Commit aefed3e554 ("scsi: qla2xxx: target: Fix offline port handling
and host reset handling") caused two problems:
1. Commands sent to FW, after chip reset got stuck and never freed as FW
is not going to respond to them anymore.
2. BUG_ON(cmd->sg_mapped) in qlt_free_cmd(). Commit 26f9ce5381
("scsi: qla2xxx: Fix missed DMA unmap for aborted commands")
attempted to fix this, but introduced another bug under different
circumstances when two different CPUs were racing to call
qlt_unmap_sg() at the same time: BUG_ON(!valid_dma_direction(dir)) in
dma_unmap_sg_attrs().
So revert "scsi: qla2xxx: Fix missed DMA unmap for aborted commands" and
partially revert "scsi: qla2xxx: target: Fix offline port handling and
host reset handling" at __qla2x00_abort_all_cmds.
Fixes: aefed3e554 ("scsi: qla2xxx: target: Fix offline port handling and host reset handling")
Fixes: 26f9ce5381 ("scsi: qla2xxx: Fix missed DMA unmap for aborted commands")
Co-developed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://patch.msgid.link/0e7e5d26-e7a0-42d1-8235-40eeb27f3e98@cybernetics.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b518e86d1a ]
Correct possible race conditions during device removal.
Previously, a scheduled work item to reset a LUN could still execute
after the device was removed, leading to use-after-free and other
resource access issues.
This race condition occurs because the abort handler may schedule a LUN
reset concurrently with device removal via sdev_destroy(), leading to
use-after-free and improper access to freed resources.
- Check in the device reset handler if the device is still present in
the controller's SCSI device list before running; if not, the reset
is skipped.
- Cancel any pending TMF work that has not started in sdev_destroy().
- Ensure device freeing in sdev_destroy() is done while holding the
LUN reset mutex to avoid races with ongoing resets.
Fixes: 2d80f4054f ("scsi: smartpqi: Update deleting a LUN via sysfs")
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20251106163823.786828-3-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20da637eb5 ]
In stex_probe(), register_reboot_notifier() is called at the beginning,
but if any subsequent initialization step fails, the function returns
without unregistering the notifier, resulting in a resource leak.
Add unregister_reboot_notifier() in the out_disable error path to ensure
proper cleanup on all failure paths.
Fixes: 61b745fa63 ("scsi: stex: Add S6 support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251104094847.270-1-vulab@iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
scsi_decide_disposition() may call scsi_check_sense().
scsi_decide_disposition() calls are not serialized. Hence, counter
updates by scsi_check_sense() must be serialized. Hence this patch that
makes the counters updated by scsi_check_sense() atomic.
Cc: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Fixes: a5d518cd4e ("scsi: core: Add counters for New Media and Power On/Reset UNIT ATTENTIONs")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Link: https://patch.msgid.link/20251014220244.3689508-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 995412e23b ("blk-mq: Replace tags->lock with SRCU for tag
iterators") introduced the following regression:
Call trace:
__srcu_read_lock+0x30/0x80 (P)
blk_mq_tagset_busy_iter+0x44/0x300
scsi_host_busy+0x38/0x70
ufshcd_print_host_state+0x34/0x1bc
ufshcd_link_startup.constprop.0+0xe4/0x2e0
ufshcd_init+0x944/0xf80
ufshcd_pltfrm_init+0x504/0x820
ufs_rockchip_probe+0x2c/0x88
platform_probe+0x5c/0xa4
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x150
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1e0
bus_for_each_dev+0x7c/0xdc
driver_attach+0x24/0x30
bus_add_driver+0x110/0x230
driver_register+0x68/0x130
__platform_driver_register+0x20/0x2c
ufs_rockchip_pltform_init+0x1c/0x28
do_one_initcall+0x60/0x1e0
kernel_init_freeable+0x248/0x2c4
kernel_init+0x20/0x140
ret_from_fork+0x10/0x20
Fix this regression by making scsi_host_busy() check whether the SCSI
host tag set has already been initialized. tag_set->ops is set by
scsi_mq_setup_tags() just before blk_mq_alloc_tag_set() is called. This
fix is based on the assumption that scsi_host_busy() and
scsi_mq_setup_tags() calls are serialized. This is the case in the UFS
driver.
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Closes: https://lore.kernel.org/linux-block/pnezafputodmqlpumwfbn644ohjybouveehcjhz2hmhtcf2rka@sdhoiivync4y/
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20251007214800.1678255-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window. The most important one is the
qla2xxx which reverts a conversion to fix flexible array member
warnings, that went up in this merge window but which turned out on
further testing to be causing data corruption.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaOpnUhsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIUCFQEA1cADof79U9suDka2hAa2l7D4wJQ53qSj
R7CwarAVX2wA/3RaEHySnSk+ivyHRl5AOYlPrYsnBo1o2KUq1M6kfviM
=itgd
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window.
The most important one is the qla2xxx which reverts a conversion to
fix flexible array member warnings, that went up in this merge window
but which turned out on further testing to be causing data corruption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Include UTP error in INT_FATAL_ERRORS
scsi: ufs: sysfs: Make HID attributes visible
scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
scsi: ufs: core: Fix PM QoS mutex initialization
scsi: ufs: core: Fix runtime suspend error deadlock
Revert "scsi: qla2xxx: Fix memcpy() field-spanning write issue"
scsi: target: target_core_configfs: Add length check to avoid buffer overflow
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmjkpakTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXip5B/48MvTFJ1qwRGPVzevZQ8Z4SDogEREp
69VS/xRf1YCIzyXyanwqf1dXLq8NAqicSp6ewpJAmNA55/9O0cwT2EtohjeGCu61
krPIvS3KT7xI0uSEniBdhBtALYBscnQ0e3cAbLNzL7bwA6Q6OmvoIawpBADgE/cW
aZNCK9jy+WUqtXc6lNtkJtST0HWGDn0h04o2hjqIkZ+7ewjuEEJBUUB/JZwJ41Od
UxbID0PAcn9O4n/u/Y/GH65MX+ddrdCgPHEGCLAGAKT24lou3NzVv445OuCw0c4W
ilALIRb9iea56ZLVBW5O82+7g9Ag41LGq+841MNlZjeRNONGykaUpTWZ
=OR26
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Unify guest entry code for KVM and MSHV (Sean Christopherson)
- Switch Hyper-V MSI domain to use msi_create_parent_irq_domain()
(Nam Cao)
- Add CONFIG_HYPERV_VMBUS and limit the semantics of CONFIG_HYPERV
(Mukesh Rathor)
- Add kexec/kdump support on Azure CVMs (Vitaly Kuznetsov)
- Deprecate hyperv_fb in favor of Hyper-V DRM driver (Prasanna
Kumar T S M)
- Miscellaneous enhancements, fixes and cleanups (Abhishek Tiwari,
Alok Tiwari, Nuno Das Neves, Wei Liu, Roman Kisel, Michael Kelley)
* tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyperv: Remove the spurious null directive line
MAINTAINERS: Mark hyperv_fb driver Obsolete
fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driver
Drivers: hv: Make CONFIG_HYPERV bool
Drivers: hv: Add CONFIG_HYPERV_VMBUS option
Drivers: hv: vmbus: Fix typos in vmbus_drv.c
Drivers: hv: vmbus: Fix sysfs output format for ring buffer index
Drivers: hv: vmbus: Clean up sscanf format specifier in target_cpu_store()
x86/hyperv: Switch to msi_create_parent_irq_domain()
mshv: Use common "entry virt" APIs to do work in root before running guest
entry: Rename "kvm" entry code assets to "virt" to genericize APIs
entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper
mshv: Handle NEED_RESCHED_LAZY before transferring to guest
x86/hyperv: Add kexec/kdump support on Azure CVMs
Drivers: hv: Simplify data structures for VMBus channel close message
Drivers: hv: util: Cosmetic changes for hv_utils_transport.c
mshv: Add support for a new parent partition configuration
clocksource: hyper-v: Skip unnecessary checks for the root partition
hyperv: Add missing field to hv_output_map_device_interrupt
