[ Upstream commit f9ff39f940 ]
Pull struct drm_mode_fb_cmd2 initialization out of the driver dependent
code into shared display code.
v2: Rebase on xe stride alignment change
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/e922e47bfd39f9c5777f869ff23c23309ebbb380.1758184771.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Stable-dep-of: 460b317203 ("drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6979d2c80c ]
It's sketchy to pass error pointers via to_intel_framebuffer(). It
probably works as long as struct intel_framebuffer embeds struct
drm_framebuffer at offset 0, but be explicit about it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/17631db227d527d6c67f5d6b67adec1ff8dc6f8d.1758184771.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Stable-dep-of: 460b317203 ("drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a36b339a1 ]
For reasons unknown, xe uses XE_PAGE_SIZE alignment for
stride. Presumably it's just a confusion between stride alignment and bo
allocation size alignment. Switch to 64 byte alignment to, uh, align
with i915.
This will also be helpful in deduplicating and unifying the xe and i915
framebuffer allocation.
Link: https://lore.kernel.org/r/aLqsC87Ol_zCXOkN@intel.com
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/7f4972104de8b179d5724ae83892ee294d3f3fd3.1758184771.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Stable-dep-of: 460b317203 ("drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf2084a7b1 ]
When split svm ranges that have been mapped using huge page should use huge
page size(2MB) to check split range alignment, not prange->granularity that
means migration granularity.
Fixes: 7ef6b2d4b7 ("drm/amdkfd: remap unaligned svm ranges that have split")
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 448ee45353)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bdc2c0e12 ]
strcpy() has been deprecated because it performs no bounds checking on the
destination buffer, which can lead to buffer overflows. Use the safer
strscpy() instead.
Signed-off-by: Madhur Kumar <madhurkumar004@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Fixes: 15a996bbb6 ("drm/nouveau: assign fence_chan->name correctly")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251204120822.17502-1-madhurkumar004@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 479acb9db3 ]
The drm_property_create_signed_range() function doesn't return error
pointers it returns NULL on error. Fix the error checking to match.
Fixes: 8f7179a102 ("drm/atomic: Add support for mouse hotspots")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/aTB023cfcIPkCsFS@stanley.mountain
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a7a7b80a2 ]
A cleanup patch apparently by accident used a local device structure
instead of a pointer to one in the nt35560_read_id() function, causing
a warning about stack usage:
drivers/gpu/drm/panel/panel-novatek-nt35560.c: In function 'nt35560_read_id':
drivers/gpu/drm/panel/panel-novatek-nt35560.c:249:1: error: the frame size of 1296 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Change this to a pointer as was liley intended here.
Fixes: 5fbc0dbb92 ("drm/panel: novatek-nt35560: Clean up driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251204094550.1030506-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eec7e23d84 ]
This commit prevents the possibility of a use after free issue in the
GROUP_CREATE ioctl function, which arose as pointer to the group is
accessed in that ioctl function after storing it in the Xarray.
A malicious userspace can second guess the handle of a group and try
to call GROUP_DESTROY ioctl from another thread around the same time
as GROUP_CREATE ioctl.
To prevent the use after free exploit, this commit uses a mark on an
entry of group pool Xarray which is added just before returning from
the GROUP_CREATE ioctl function. The mark is checked for all ioctls
that specify the group handle and so userspace won't be abe to delete
a group that isn't marked yet.
v2: Add R-bs and fixes tags
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patch.msgid.link/20251127164912.3788155-1-akash.goel@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 089702632f ]
XCD id is assigned to uuid, which causes some performance
drop in SPX mode, assigning AID back will resolve the
issue.
Fixes: 3a75edf93a ("drm/amdkfd: set uuid for each partition in topology")
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a79482699 ]
The .H_SYNC_POLARITY and .V_SYNC_POLARITY variables are 1 bit bitfields
of a u32. The ATOM_HSYNC_POLARITY define is 0x2 and the
ATOM_VSYNC_POLARITY is 0x4. When we do a bitwise negate of 0, 2, or 4
then the last bit is always 1 so this code always sets .H_SYNC_POLARITY
and .V_SYNC_POLARITY to true.
This code is instead intended to check if the ATOM_HSYNC_POLARITY or
ATOM_VSYNC_POLARITY flags are set and reverse the result. In other
words, it's supposed to be a logical negate instead of a bitwise negate.
Fixes: ae79c310b1 ("drm/amd/display: Add DCE12 bios parser support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce04ec03a9 ]
The kernel BOs unnecessarily got added to the external objects list
of drm_gpuvm, when mapping to GPU, which would have resulted in few
extra CPU cycles being spent at the time of job submission as
drm_exec_until_all_locked() loop iterates over all external objects.
Kernel BOs are private to a VM and so they share the dma_resv object of
the dummy GEM object created for a VM. Use of DRM_EXEC_IGNORE_DUPLICATES
flag ensured the recursive locking of the dummy GEM object was ignored.
Also no extra space got allocated to add fences to the dma_resv object
of dummy GEM object. So no other impact apart from few extra CPU cycles.
This commit sets the pointer to dma_resv object of GEM object of
kernel BOs before they are mapped to GPU, to prevent them from
being added to external objects list.
v2: Add R-bs and fixes tags
Fixes: 8a1cc07578 ("drm/panthor: Add GEM logical block")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251120172118.2741724-1-akash.goel@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04d98b3452 ]
The flush page DMA address is stored in a special register that is not
associated with the GPU's standard DMA range. For example, on Turing,
the GPU's MMU can handle 47-bit addresses, but the flush page address
register is limited to 40 bits.
At the point during device initialization when the flush page is
allocated, the DMA mask is still at its default of 32 bits. So even
though it's unlikely that the flush page could exist above a 40-bit
address, the dma_map_page() call could fail, e.g. if IOMMU is disabled
and the address is above 32 bits. The simplest way to achieve all
constraints is to allocate the page in the DMA32 zone. Since the flush
page is literally just a page, this is an acceptable limitation. The
alternative is to temporarily set the DMA mask to 40 (or 52 for Hopper
and later) bits, but that could have unforseen side effects.
In situations where the flush page is allocated above 32 bits and IOMMU
is disabled, you will get an error like this:
nouveau 0000:65:00.0: DMA addr 0x0000000107c56000+4096 overflow (mask ffffffff, bus limit 0).
Fixes: 5728d06419 ("drm/nouveau/fb: handle sysmem flush page from common code")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251113230323.1271726-1-ttabi@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca04ce7a2f ]
Current logic assumes that the voltage corners in both MxG and MxA are
always same. This is not true for recent targets. So, rework the rpmh init
sequence to probe and calculate the votes with the respective rails, ie,
GX rails should use MxG as secondary rail and Cx rail should use MxA as
the secondary rail.
Fixes: d6225e0cd0 ("drm/msm/adreno: Add support for X185 GPU")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689014/
Message-ID: <20251118-kaana-gpu-support-v4-12-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff7a6de043 ]
Correct the register offset and enable this workaround for all A7x
and newer GPUs to match the recommendation. Also, downstream does this
w/a after moving the fence to allow mode. So do the same.
Fixes: dbfbb376b5 ("drm/msm/a6xx: Add A621 support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688997/
Message-ID: <20251118-kaana-gpu-support-v4-3-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 180349b840 ]
As per the recommendation, A7x and newer GPUs should flush the LRZ cache
before switching the pagetable. Update a6xx_set_pagetable() to do this.
While we are at it, sync both BV and BR before issuing a
CP_RESET_CONTEXT_STATE command, to match the downstream sequence.
Fixes: af66706acc ("drm/msm/a6xx: Add skeleton A7xx support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688995/
Message-ID: <20251118-kaana-gpu-support-v4-2-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20ac36b71c ]
if matrixbit is 11,
The range of color matrix is from 0 to (BIT(12) - 1).
Values from 0 to (BIT(11) - 1) represent positive numbers,
values from BIT(11) to (BIT(12) - 1) represent negative numbers.
For example, -1 need converted to 8191.
so convert S31.32 to HW Q2.11 format by drm_color_ctm_s31_32_to_qm_n,
and set int_bits to 2.
Fixes: 738ed4156f ("drm/mediatek: Add matrix_bits private data for ccorr")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jay Liu <jay.liu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250921055416.25588-2-jay.liu@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3a22373fc ]
If the rootfs have a legacy A200 firmware, currently the driver will
complain each time the hw is reinited (which can happen a lot). E.g.
with GL testsuite the hw is reinited after each test, spamming the
console.
Make sure that the message is printed only once: when we detect the
firmware that doesn't support protection.
Fixes: 302295070d ("drm/msm/a2xx: support loading legacy (iMX) firmware")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688098/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3065e6a4d3 ]
The crashstate_get_bos() function allocates memory for `state->bos`
using kcalloc(), but the vmbind path does not check for allocation
failure before dereferencing it in the following drm_gpuvm_for_each_va()
loop. This could lead to a NULL pointer dereference if memory allocation
fails.
Fix this by wrapping the drm_gpuvm_for_each_va() loop with a NULL check
on state->bos, similar to the safety check in the non-vmbind path.
Fixes: af9aa6f316 ("drm/msm: Crashdump support for sparse")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Patchwork: https://patchwork.freedesktop.org/patch/687556/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3099e0247e ]
crashstate_get_vm_logs() did not check the return value of
kmalloc_array(). In low-memory situations, kmalloc_array() may return
NULL, leading to a NULL pointer dereference when the function later
accesses state->vm_logs.
Fix this by checking the return value of kmalloc_array() and setting
state->nr_vm_logs to 0 if allocation fails.
Fixes: 9edc52967c ("drm/msm: Add VM logging for VM_BIND updates")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Patchwork: https://patchwork.freedesktop.org/patch/687555/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9792823d1 ]
The commit a106ed98af ("drm/msm/dpu: use devres-managed allocation for
HW blocks") dropped all dpu_hw_foo_destroy() functions, but the
prototype for dpu_hw_dsc_destroy() was omitted. Drop it now to clean up
the header.
Fixes: a106ed98af ("drm/msm/dpu: use devres-managed allocation for HW blocks")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Jessica Zhang <jesszhan0024@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/683697/
Link: https://lore.kernel.org/r/20251027-dpu-drop-dsc-destroy-v1-1-968128de4bf6@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86db652fc2 ]
After integrating OLDI support[0], it is necessary to identify which VP
instances use OLDI, since the OLDI driver owns the video port clock
(as a serial clock). Clock operations on these VPs must be delegated to
the OLDI driver, not handled by the TIDSS driver. This issue also
emerged in upstream discussions when DSI-related clock management was
attempted in the TIDSS driver[1].
To address this, add an 'is_ext_vp_clk' array to the 'tidss_device'
structure, marking a VP as 'true' during 'tidss_oldi_init()' and as
'false' during 'tidss_oldi_deinit()'. TIDSS then uses 'is_ext_vp_clk'
to skip clock validation checks in 'dispc_vp_mode_valid()' for VPs
under OLDI control.
Since OLDI uses the DSS VP clock directly as a serial interface and
manages its own rate, mode validation should be implemented in the OLDI
bridge's 'mode_valid' hook. This patch adds that logic, ensuring proper
delegation and avoiding spurious clock handling in the TIDSS driver.
[0]: https://lore.kernel.org/all/20250528122544.817829-1-aradhya.bhatia@linux.dev/
[1]: https://lore.kernel.org/all/DA6TT575Z82D.3MPK8HG5GRL8U@kernel.org/
Fixes: 7246e09299 ("drm/tidss: Add OLDI bridge support")
Tested-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Link: https://patch.msgid.link/20251104151422.307162-3-s-jain1@ti.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/ffd5ebe03391b3c01e616c0c844a4b8ddecede36.1762513240.git.jani.nikula@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 527e132573 ]
The TIDSS hardware does not have independent maximum or minimum pixel
clock limits for each video port. Instead, these limits are determined
by the SoC's clock architecture. Previously, this constraint was
modeled using the 'max_pclk_khz' and 'min_pclk_khz' fields in
'dispc_features', but this approach is static and does not account for
the dynamic behavior of PLLs.
This patch removes the 'max_pclk_khz' and 'min_pclk_khz' fields from
'dispc_features'. The correct way to check if a requested mode's pixel
clock is supported is by using 'clk_round_rate()' in the 'mode_valid()'
hook. If the best frequency match for the mode clock falls within the
supported tolerance, it is approved. TIDSS supports a 5% pixel clock
tolerance, which is now reflected in the validation logic.
This change allows existing DSS-compatible drivers to be reused across
SoCs that only differ in their pixel clock characteristics. The
validation uses 'clk_round_rate()' for each mode, which may introduce
additional delay (about 3.5 ms for 30 modes), but this is generally
negligible. Users desiring faster validation may bypass these calls
selectively, for example, checking only the highest resolution mode,
as shown here[1].
[1]: https://lore.kernel.org/all/20250704094851.182131-3-j-choudhary@ti.com/
Tested-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Link: https://patch.msgid.link/20251104151422.307162-2-s-jain1@ti.com
[Tomi: dropped 'inline' from check_pixel_clock]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Stable-dep-of: 86db652fc2 ("drm/tidss: Move OLDI mode validation to OLDI bridge mode_valid hook")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4492d54d59 ]
This commit addresses a memleak issue of panthor_vma (or drm_gpuva)
structure in Panthor driver, that can happen if the GPU page table
update operation to map the pages fail.
The issue is very unlikely to occur in practice.
v2: Add panthor_vm_op_ctx_return_vma() helper (Boris)
v3: Add WARN_ON_ONCE (Boris)
Fixes: 647810ec24 ("drm/panthor: Add the MMU/VM logical block")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251021081042.1377406-1-akash.goel@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98dd514344 ]
If the MMU is down, panthor_vm_unmap_range() might return an error.
We expect the page table to be updated still, and if the MMU is blocked,
the rest of the GPU should be blocked too, so no risk of accessing
physical memory returned to the system (which the current code doesn't
cover for anyway).
Proceed with the rest of the cleanup instead of bailing out and leaving
the va_node inserted in the drm_mm, which leads to UAF when other
adjacent nodes are removed from the drm_mm tree.
Reported-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Closes: https://gitlab.freedesktop.org/panfrost/linux/-/issues/57
Fixes: 8a1cc07578 ("drm/panthor: Add GEM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251031154818.821054-2-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08be57e6e8 ]
There is a race between panthor_device_unplug() and
panthor_device_suspend() which can lead to IRQ handlers running on a
powered down GPU. This is how it can happen:
- unplug routine calls drm_dev_unplug()
- panthor_device_suspend() can now execute, and will skip a lot of
important work because the device is currently marked as unplugged.
- IRQs will remain active in this case and IRQ handlers can therefore
try to access a powered down GPU.
The fix is simply to take the PM ref in panthor_device_unplug() a
little bit earlier, before drm_dev_unplug().
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Fixes: 5fe909cae1 ("drm/panthor: Add the device logical block")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251022103242.1083311-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7051f6ba96 ]
The function panthor_fw_unplug() will free the FW memory sections.
The problem is that there could still be pending FW events which are yet
not handled at this point. process_fw_events_work() can in this case try
to access said freed memory.
Simply call disable_work_sync() to both drain and prevent future
invocation of process_fw_events_work().
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251027140217.121274-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94a6d20fea ]
group_free_queue() can be called on a partially initialized queue
object if something fails in group_create_queue(). Make sure we don't
call drm_sched_entity_destroy() on an entity that hasn't been
initialized.
Fixes: 7d9c3442b0 ("drm/panthor: Defer scheduler entitiy destruction to queue release")
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251031160318.832427-2-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb7939e332 ]
In practice it's not going to fail because we're passing the current
sanity checks done by drm_sched_entity_init(), and that's the only
reason it would return an error, but better safe than sorry.
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251031160318.832427-1-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1aa93005d ]
The call to devm_platform_ioremap_resource() was replaced by a call to
devm_platform_get_and_ioremap_resource(), but the comment referring to
the function's possible returned error codes was not updated.
Fixes: 927f3e0253 ("drm/imagination: Implement MIPS firmware processor and MMU support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/2266514318480d17f52c7e5e67578dae6827914e.1761745586.git.geert+renesas@glider.be
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97ad568cd6 ]
The nova-drm driver does not provide any value without nova-core being
selected as well, hence select NOVA_CORE.
Fixes: cdeaeb9dd7 ("drm: nova-drm: add initial driver skeleton")
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20251028110058.340320-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42bbf82b73 ]
The RXSETR_CRCEN(n) and RXSETR_ECCEN(n) macros both take parameter (n),
add the missing macro parameter. Neither of those macros is used by the
driver, so for now the bug is harmless.
Fixes: 685e8dae19 ("drm/rcar-du: dsi: Implement DSI command support")
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reported-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20251028232959.109936-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0559012a1 ]
The CSA and EOP buffers have different alignement requirements.
Hardcode them for now as a bug fix. A proper query will be added in
a subsequent patch.
v2: verify gfx shadow helper callback (Prike)
Fixes: 9e46b8bb05 ("drm/amdgpu: validate userq buffer virtual address and size")
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87990025b8 ]
Because nova-core depends on CONFIG_64BIT and a raw DmaAddress is
always a u64, we can remove the now actually useless conversion.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
[acourbot@nvidia.com: reword commit as suggested by John.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20250926130623.61316-1-dakr@kernel.org>
Stable-dep-of: f7a33a67c5 ("gpu: nova-core: gsp: do not unwrap() SGEntry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a312acdcec ]
On SoCs, like the SAM9X75, which embed the XLCDC ip, the registers that
configure the unified scaling engine were not filled with proper values.
Indeed, for YCbCr formats, the VXSCFACT bitfield of the HEOCFG25
register and the HXSCFACT bitfield of the HEOCFG27 register were
incorrect.
For 4:2:0 formats, both vertical and horizontal factors for
chroma chanels should be divided by 2 from the factors for the luma
channel. Hence:
HEOCFG24.VXSYFACT = VFACTOR
HEOCFG25.VSXCFACT = VFACTOR / 2
HEOCFG26.HXSYFACT = HFACTOR
HEOCFG27.HXSCFACT = HFACTOR / 2
However, for 4:2:2 formats, only the horizontal factor for chroma
chanels should be divided by 2 from the factor for the luma channel;
the vertical factor is the same for all the luma and chroma channels.
Hence:
HEOCFG24.VXSYFACT = VFACTOR
HEOCFG25.VXSCFACT = VFACTOR
HEOCFG26.HXSYFACT = HFACTOR
HEOCFG27.HXSCFACT = HFACTOR / 2
Fixes: d498771b0b ("drm: atmel_hlcdc: Add support for XLCDC using IP specific driver ops")
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20241014094942.325211-1-manikandan.m@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39144b611e ]
Don't clear all mode flags. We only want to maek sure we use HS mode
during unprepare.
Fixes: c7f66d32dd ("drm/panel: add support for rm69299 visionox panel")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250910-shift6mq-panel-v3-2-a7729911afb9@sigxcpu.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d298062312 ]
Make the clock frequency match what the sdm845 downstream kernel
uses. Otherwise the panel stays black.
Fixes: 783334f366 ("drm/panel: visionox-rm69299: support the variant found in the SHIFT6mq")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250910-shift6mq-panel-v3-1-a7729911afb9@sigxcpu.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7d393267c ]
Fix race condition between host1x_syncpt_alloc()
and host1x_syncpt_put() by using kref_put_mutex()
instead of kref_put() + manual mutex locking.
This ensures no thread can acquire the
syncpt_mutex after the refcount drops to zero
but before syncpt_release acquires it.
This prevents races where syncpoints could
be allocated while still being cleaned up
from a previous release.
Remove explicit mutex locking in syncpt_release
as kref_put_mutex() handles this atomically.
Signed-off-by: Mainak Sen <msen@nvidia.com>
Fixes: f5ba33fb96 ("gpu: host1x: Reserve VBLANK syncpoints at initialization")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250707-host1x-syncpt-race-fix-v1-1-28b0776e70bc@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
If the board supports IP discovery, we don't need to
parse the gpu info firmware.
Backport to 6.18.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4721
Fixes: fa819e3a7c ("drm/amdgpu: add support for cyan skillfish gpu_info")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5427e32fa3)
Ensure the userq TLB flush is emitted only after
the VM update finishes and the PT BOs have been
annotated with bookkeeping fences.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f3854e04b7)
Cc: stable@vger.kernel.org
[WHY]
When monitor is still booting EDID read can fail while DPCD read
is successful. In this case no EDID data will be returned, and this
could happen for a while.
[HOW]
Increase number of attempts to read EDID in dm_helpers_read_local_edid()
to 25.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a76d6f2c76)
Cc: stable@vger.kernel.org
[WHY]
When a laptop lid is closed the connector is disabled but userspace
can still try to change brightness. This doesn't work because the
panel is turned off. It will eventually time out, but there is a lot
of stutter along the way.
[How]
Iterate all connectors to check whether the matching one for the backlight
index is enabled.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4675
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f6eeab3032)
Cc: stable@vger.kernel.org
