commit e4240db933 upstream.
rtla-timerlat allows a *thread* latency threshold to be set via the
-T/--thread option. However, the timerlat tracer calls this *total*
latency (stop_tracing_total_us), and stops tracing also when the
return-to-user latency is over the threshold.
Change the behavior of the timerlat BPF program to reflect what the
timerlat tracer is doing, to avoid discrepancy between stopping
collecting data in the BPF program and stopping tracing in the timerlat
tracer.
Cc: stable@vger.kernel.org
Fixes: e34293ddce ("rtla/timerlat: Add BPF skeleton to collect samples")
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251006143100.137255-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b9439c933 upstream.
In commit 0297cdc12a ("KVM: selftests: Add option to rseq test to
override /dev/cpu_dma_latency"), a 'break' is missed before the option
'l' in the argument parsing loop, which leads to an unexpected core
dump in atoi_paranoid(). It tries to get the latency from non-existent
argument.
host$ ./rseq_test -u
Random seed: 0x6b8b4567
Segmentation fault (core dumped)
Add a 'break' before the option 'l' in the argument parsing loop to avoid
the unexpected core dump.
Fixes: 0297cdc12a ("KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency")
Cc: stable@vger.kernel.org # v6.15+
Signed-off-by: Gavin Shan <gshan@redhat.com>
Link: https://patch.msgid.link/20251124050427.1924591-1-gshan@redhat.com
[sean: describe code change in shortlog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f59b701b46 upstream.
KASAN reports a global-out-of-bounds access when running these nfit
tests: clear.sh, pmem-errors.sh, pfn-meta-errors.sh, btt-errors.sh,
daxdev-errors.sh, and inject-error.sh.
[] BUG: KASAN: global-out-of-bounds in nfit_test_ctl+0x769f/0x7840 [nfit_test]
[] Read of size 4 at addr ffffffffc03ea01c by task ndctl/1215
[] The buggy address belongs to the variable:
[] handle+0x1c/0x1df4 [nfit_test]
nfit_test_search_spa() uses handle[nvdimm->id] to retrieve a device
handle and triggers a KASAN error when it reads past the end of the
handle array. It should not be indexing the handle array at all.
The correct device handle is stored in per-DIMM test data. Each DIMM
has a struct nfit_mem that embeds a struct acpi_nfit_memdev that
describes the NFIT device handle. Use that device handle here.
Fixes: 10246dc84d ("acpi nfit: nfit_test supports translate SPA")
Cc: stable@vger.kernel.org
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251031234227.1303113-1-alison.schofield@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29f4801e9c upstream.
This validates the previous commit: the userspace can set unknown flags
-- the 7th bit is currently unused -- without errors, but only the
supported ones are printed in the endpoints dumps.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-2-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3042cbe84 upstream.
The error path of copying the old config used the wrong variable in the
error message:
$ mkdir /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad
$ chmod 0 /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good
cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED!
Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744.
failed to copy to config-good.tmp
When it should have shown:
failed to copy /tmp/build//.config to config-good.tmp
Cc: stable@vger.kernel.org
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Fixes: 0f0db06599 ("ktest: Add standalone config-bisect.pl program")
Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home
Reported-by: "John W. Krahn" <jwkrahn@shaw.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9637fc3bdd ]
The functions ublk_queue_use_zc(), ublk_queue_use_auto_zc(), and
ublk_queue_auto_zc_fallback() were returning int, but performing
bitwise AND on q->flags which is __u64.
When a flag bit is set in the upper 32 bits (beyond INT_MAX), the
result of the bitwise AND operation could overflow when cast to int,
leading to incorrect boolean evaluation.
For example, if UBLKS_Q_AUTO_BUF_REG_FALLBACK is 0x8000000000000000:
- (u64)flags & 0x8000000000000000 = 0x8000000000000000
- Cast to int: undefined behavior / incorrect value
- Used in if(): may evaluate incorrectly
Fix by:
1. Changing return type from int to bool for semantic correctness
2. Using !! to explicitly convert to boolean (0 or 1)
This ensures the functions return proper boolean values regardless
of which bit position the flags occupy in the 64-bit field.
Fixes: c3a6d48f86 ("selftests: ublk: remove ublk queue self-defined flags")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b244b077c ]
GCC gets a bit confused and reports:
In function '_test_cmd_get_hw_info',
inlined from 'iommufd_ioas_get_hw_info' at iommufd.c:779:3,
inlined from 'wrapper_iommufd_ioas_get_hw_info' at iommufd.c:752:1:
>> iommufd_utils.h:804:37: warning: array subscript 'struct iommu_test_hw_info[0]' is partly outside array bounds of 'struct iommu_test_hw_info_buffer_smaller[1]' [-Warray-bounds=]
804 | assert(!info->flags);
| ~~~~^~~~~~~
iommufd.c: In function 'wrapper_iommufd_ioas_get_hw_info':
iommufd.c:761:11: note: object 'buffer_smaller' of size 4
761 | } buffer_smaller;
| ^~~~~~~~~~~~~~
While it is true that "struct iommu_test_hw_info[0]" is partly out of
bounds of the input pointer, it is not true that info->flags is out of
bounds. Unclear why it warns on this.
Reuse an existing properly sized stack buffer and pass a truncated length
instead to test the same thing.
Fixes: af4fde93c3 ("iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl")
Link: https://patch.msgid.link/r/0-v1-63a2cffb09da+4486-iommufd_gcc_bounds_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512032344.kaAcKFIM-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ec8ca26fe ]
Jakub reports spurious failures of the 'conntrack_reverse_clash.sh'
selftest. A bogus test makes nat core resort to port rewrite even
though there is no need for this.
When the test is made, nf_nat_used_tuple() would already have caused us
to return if no other CPU had added a colliding entry.
Moreover, nf_nat_used_tuple() would have ignored the colliding entry if
their origin tuples had been the same.
All that is left to check is if the colliding entry in the hash table
is subject to NAT, and, if its not, if our entry matches in the reverse
direction, e.g. hash table has
addr1:1234 -> addr2:80, and we want to commit
addr2:80 -> addr1:1234.
Because we already checked that neither the new nor the committed entry is
subject to NAT we only have to check origin vs. reply tuple:
for non-nat entries, the reply tuple is always the inverted original.
Just in case there are more problems extend the error reporting
in the selftest while at it and dump conntrack table/stats on error.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251206175135.4a56591b@kernel.org/
Fixes: d8f84a9bc7 ("netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8a81b0ce5 ]
Jakub says: "We try to reserve SKIP for tests skipped because tool is
missing in env, something isn't built into the kernel etc."
use xfail, we can't force the race condition to appear at will
so its expected that the test 'fails' occasionally.
Fixes: 78a5883635 ("selftests: netfilter: add conntrack clash resolution test case")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251206175647.5c32f419@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91dc09a609 ]
Fix
tfo.c: In function ‘run_server’:
tfo.c:84:9: warning: ignoring return value of ‘read’ declared with attribute ‘warn_unused_result’
by evaluating the return value from read() and displaying an error message
if it reports an error.
Fixes: c65b5bb232 ("selftests: net: add passive TFO test binary")
Cc: David Wei <dw@davidwei.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251205171010.515236-14-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59546e8744 ]
Fix
ksft.h: In function ‘ksft_ready’:
ksft.h:27:9: warning: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’
ksft.h: In function ‘ksft_wait’:
ksft.h:51:9: warning: ignoring return value of ‘read’ declared with attribute ‘warn_unused_result’
by checking the return value of the affected functions and displaying
an error message if an error is seen.
Fixes: 2b6d490b82 ("selftests: drv-net: Factor out ksft C helpers")
Cc: Joe Damato <jdamato@fastly.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251205171010.515236-11-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6744c0b182 ]
It is intended that a "--null" run doesn't open any events.
Fixes: 2cc7aa995c ("perf stat: Refactor retry/skip/fatal error handling")
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f60efb4454 ]
Rather than exit the internal map_symbols directly, put the mem-info
that does this and also lowers the reference count on the mem-info
itself otherwise the mem-info is being leaked.
Fixes: 56e144fe98 ("perf mem_info: Add and use map_symbol__exit and addr_map_symbol__exit")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27e7112579 ]
There are 2 slots left for kvm_add_default_arch_event, fix the
assertion so that debug builds don't fail the assert and to agree with
the comment.
Fixes: 45ff39f6e7 ("perf tools kvm: Fix the potential out of range memory access issue")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad0b9c4865 ]
It's counted twice as it's increased after calling maps__insert(). I
guess we want to increase it only after it's added properly.
Reviewed-by: Ian Rogers <irogers@google.com>
Fixes: 2e538c4a18 ("perf tools: Improve kernel/modules symbol lookup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7da4d60db3 ]
The maps__split_kallsyms() will split symbols to module DSOs if it comes
from a module. It also handled some unusual kernel symbols after modules
by creating new kernel maps like "[kernel].0".
But they are pseudo DSOs to have those unexpected symbols. They should
not be considered as unloaded kernel DSOs. Otherwise the dso__load()
for them will end up calling dso__load_kallsyms() and then
maps__split_kallsyms() again and again.
Reviewed-by: Ian Rogers <irogers@google.com>
Fixes: 2e538c4a18 ("perf tools: Improve kernel/modules symbol lookup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25d498e636 ]
It was reported that python backtrace with JIT dump was broken after the
change to built-in SHA-1 implementation. It seems python generates the
same JIT code for each function. They will become separate DSOs but the
contents are the same. Only difference is in the symbol name.
But this caused a problem that every JIT'ed DSOs will have the same
build-ID which makes perf confused. And it resulted in no python
symbols (from JIT) in the output.
Looking back at the original code before the conversion, it used the
load_addr as well as the code section to distinguish each DSO. But it'd
be better to use contents of symtab and strtab instead as it aligns with
some linker behaviors.
This patch adds a buffer to save all the contents in a single place for
SHA-1 calculation. Probably we need to add sha1_update() or similar to
update the existing hash value with different contents and use it here.
But it's out of scope for this change and I'd like something that can be
backported to the stable trees easily.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Pablo Galindo <pablogsal@gmail.com>
Cc: Fangrui Song <maskray@sourceware.org>
Link: https://github.com/python/cpython/issues/139544
Fixes: e3f612c1d8 ("perf genelf: Remove libcrypto dependency and use built-in sha1()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c28ee720a ]
Jakub reported increased flakiness in bond_macvlan_ipvlan.sh on regular
kernel, while the tests consistently pass on a debug kernel. This suggests
a timing-sensitive issue.
To mitigate this, introduce a short sleep before each xvlan_over_bond
connectivity check. The delay helps ensure neighbor and route cache
have fully converged before verifying connectivity.
The sleep interval is kept minimal since check_connection() is invoked
nearly 100 times during the test.
Fixes: 246af950b9 ("selftests: bonding: add macvlan over bond testing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251114082014.750edfad@kernel.org
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251127143310.47740-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad93ba0267 ]
Currently selftests require xxd with the "-n <name>" option
which allows the user to specify a name not derived from
the input object path. Instead of relying on this newer
feature, older xxd can be used if we link our desired name
("test_progs_verification_cert") to the input object.
Many distros ship xxd in vim-common package and do not have
the latest xxd with -n support.
Fixes: b720903e2b ("selftests/bpf: Enable signature verification for some lskel tests")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20251120084754.640405-3-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90ae54b4c7 ]
ERR_get_error_all()[1] is a openssl v3 API, so to make code
compatible with openssl v1 utilize ERR_get_err_line_data
instead. Since openssl is already a build requirement for
the kernel (minimum requirement openssl 1.0.0), this will
allow bpftool to compile where opensslv3 is not available.
Signing-related BPF selftests pass with openssl v1.
[1] https://docs.openssl.org/3.4/man3/ERR_get_error/
Fixes: 40863f4d6e ("bpftool: Add support for signing BPF programs")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20251120084754.640405-2-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7f7d76d6e ]
commit 603b441623 ("bpf: Update the bpf_prog_calc_tag to use SHA256")
changed digest of prog_tag to SHA256 but forgot to update tests
correspondingly. Fix it.
Fixes: 603b441623 ("bpf: Update the bpf_prog_calc_tag to use SHA256")
Signed-off-by: Xing Guo <higuoxing@gmail.com>
Link: https://lore.kernel.org/r/20251121061458.3145167-1-higuoxing@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae24fc8a16 ]
Currently, test_perf_branches_no_hw() relies on the busy loop within
test_perf_branches_common() being slow enough to allow at least one
perf event sample tick to occur before starting to tear down the
backing perf event BPF program. With a relatively small fixed
iteration count of 1,000,000, this is not guaranteed on modern fast
CPUs, resulting in the test run to subsequently fail with the
following:
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:PASS:output not valid 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
test_perf_branches_no_hw:PASS:perf_event_open 0 nsec
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_bad_sample:FAIL:output not valid no valid sample from prog
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
On a modern CPU (i.e. one with a 3.5 GHz clock rate), executing 1
million increments of a volatile integer can take significantly less
than 1 millisecond. If the spin loop and detachment of the perf event
BPF program elapses before the first 1 ms sampling interval elapses,
the perf event will never end up firing. Fix this by bumping the loop
iteration counter a little within test_perf_branches_common(), along
with ensuring adding another loop termination condition which is
directly influenced by the backing perf event BPF program
executing. Notably, a concious decision was made to not adjust the
sample_freq value as that is just not a reliable way to go about
fixing the problem. It effectively still leaves the race window open.
Fixes: 67306f84ca ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251119143540.2911424-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27746aaf1b ]
Gracefully skip the test_perf_branches_hw subtest on platforms that
do not support LBR or require specialized perf event attributes
to enable branch sampling.
For example, AMD's Milan (Zen 3) supports BRS rather than traditional
LBR. This requires specific configurations (attr.type = PERF_TYPE_RAW,
attr.config = RETIRED_TAKEN_BRANCH_INSTRUCTIONS) that differ from the
generic setup used within this test. Notably, it also probably doesn't
hold much value to special case perf event configurations for selected
micro architectures.
Fixes: 67306f84ca ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251120142059.2836181-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddb6e42494 ]
When running rtla as
`rtla <timerlat|osnoise> <top|hist> -t custom_file.txt -a 100`
-a options override trace output filename specified by -t option.
Running the command above will create <timerlat|osnoise>_trace.txt file
instead of custom_file.txt. Fix this by making sure that -a option does
not override trace output filename even if it's passed after trace
output filename is specified.
Fixes: 173a3b0148 ("rtla/timerlat: Add the automatic trace option")
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/b6ae60424050b2c1c8709e18759adead6012b971.1762186418.git.ipravdin.official@gmail.com
[ use capital letter in subject, as required by tracing subsystem ]
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34c170ae5c ]
osnoise test "top stop at failed action" is calling timerlat instead of
osnoise by mistake.
Fix it so that it calls the correct RTLA subcommand.
Fixes: 05b7e10687 ("tools/rtla: Add remaining support for osnoise actions")
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251007095341.186923-3-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d649e9f04c ]
In non-BPF mode, it takes up to 1 second for RTLA to notice that tracing
has been stopped. That means that action tests cannot have a 1 second
duration, as the SIGALRM will be racing with the threshold overflow.
Previously, non-BPF mode actions were buggy and always executed
the action, even when stopping on duration or SIGINT, preventing
this issue from manifesting. Now that this has been fixed, the tests
have become flaky, and this has to be adjusted.
Fixes: 4e26f84abf ("rtla/tests: Add tests for actions")
Fixes: 05b7e10687 ("tools/rtla: Add remaining support for osnoise actions")
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251007095341.186923-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d088da9042 ]
subtest_kmem_cache_iter_check_slabinfo() fundamentally compares slab
cache names parsed out from /proc/slabinfo against those stored within
struct kmem_cache_result. The current problem is that the slab cache
name within struct kmem_cache_result is stored within a bounded
fixed-length array (sized to SLAB_NAME_MAX(32)), whereas the name
parsed out from /proc/slabinfo is not. Meaning, using ASSERT_STREQ()
can certainly lead to test failures, particularly when dealing with
slab cache names that are longer than SLAB_NAME_MAX(32)
bytes. Notably, kmem_cache_create() allows callers to create slab
caches with somewhat arbitrarily sized names via its __name identifier
argument, so exceeding the SLAB_NAME_MAX(32) limit that is in place
now can certainly happen.
Make subtest_kmem_cache_iter_check_slabinfo() more reliable by only
checking up to sizeof(struct kmem_cache_result.name) - 1 using
ASSERT_STRNEQ().
Fixes: a496d0cdc8 ("selftests/bpf: Add a test for kmem_cache_iter")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/20251118073734.4188710-1-mattbobrowski@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 417bd0d502 ]
Commit 8d933d5c89 ("rtla/timerlat: Add continue action") moved the
code performing on-threshold actions (enabled through --on-threshold
option) to inside the RTLA main loop.
The condition in the loop does not check whether the threshold was
actually exceeded or if stop tracing was requested by the user through
SIGINT or duration. This leads to a bug where on-threshold actions are
always performed, even when the threshold was not hit.
(BPF mode is not affected, since it uses a different condition in the
while loop.)
Add a condition that checks for !stop_tracing before executing the
actions. Also, fix incorrect brackets in hist_main_loop to match the
semantics of top_main_loop.
Fixes: 8d933d5c89 ("rtla/timerlat: Add continue action")
Fixes: 2f3172f9dd ("tools/rtla: Consolidate code between osnoise/timerlat and hist/top")
Reviewed-by: Crystal Wood <crwood@redhat.com>
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251007095341.186923-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4275b2301 ]
In recently introduced timerlat_free(),
the variable 'nr_cpus' is not assigned.
Assign it with sysconf(_SC_NPROCESSORS_CONF) as done elsewhere.
Remove the culprit: -Wno-maybe-uninitialized. The rest of the
code is clean.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Fixes: 2f3172f9dd ("tools/rtla: Consolidate code between osnoise/timerlat and hist/top")
Link: https://lore.kernel.org/r/20251002170846.437888-1-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33e1fffea4 ]
The operation subclass is extracted from bits [7..1] of the payload.
Since bit [0] is not parsed, there is no chance to match the memset type
(0x25). As a result, the memset payload is never parsed successfully.
Instead of extracting a unified bit field, change to extract the
specific bits for each operation subclass.
Fixes: 34fb60400e ("perf arm-spe: Add raw decoding for SPEv1.3 MTE and MOPS load/store")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c133390398 ]
When test_send_signal_kern__open_and_load() fails parent closes the
pipe which cases ASSERT_EQ(read(pipe_p2c...)) to fail, but child
continues and enters infinite loop, while parent is stuck in wait(NULL).
Other error paths have similar issue, so kill the child before waiting on it.
The bug was discovered while compiling all of selftests with -O1 instead of -O2
which caused progs/test_send_signal_kern.c to fail to load.
Fixes: ab8b7f0cb3 ("tools/bpf: Add self tests for bpf_send_signal_thread()")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20251113171153.2583-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 367377f45c ]
It should also have PERF_SAMPLE_TID to enable inherit and PERF_SAMPLE_READ
on recent kernels. Not having _TID makes the feature check wrongly detect
the inherit and _READ support.
It was reported that the following command failed due to the error in
the missing feature check on Intel SPR machines.
$ perf record -e '{cpu/mem-loads-aux/S,cpu/mem-loads,ldlat=3/PS}' -- ls
Error:
Failure to open event 'cpu/mem-loads,ldlat=3/PS' on PMU 'cpu' which will be removed.
Invalid event (cpu/mem-loads,ldlat=3/PS) in per-thread mode, enable system wide with '-a'.
Reviewed-by: Ian Rogers <irogers@google.com>
Fixes: 3b193a57ba ("perf tools: Detect missing kernel features properly")
Reported-and-tested-by: Chen, Zide <zide.chen@intel.com>
Closes: https://lore.kernel.org/lkml/20251022220802.1335131-1-zide.chen@intel.com/
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f596acc26 ]
When creating multi-split BTF we correctly set the start string offset
to be the size of the base string section plus the base BTF start
string offset; the latter is needed for multi-split BTF since the
offset is non-zero there.
Unfortunately the BTF parsing case needed that logic and it was
missed.
Fixes: 4e29128a9a ("libbpf/btf: Fix string handling to support multi-split BTF")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251104203309.318429-2-alan.maguire@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 163e5f2b96 ]
When using perf record with the `--overwrite` option, a segmentation fault
occurs if an event fails to open. For example:
perf record -e cycles-ct -F 1000 -a --overwrite
Error:
cycles-ct:H: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'
perf: Segmentation fault
#0 0x6466b6 in dump_stack debug.c:366
#1 0x646729 in sighandler_dump_stack debug.c:378
#2 0x453fd1 in sigsegv_handler builtin-record.c:722
#3 0x7f8454e65090 in __restore_rt libc-2.32.so[54090]
#4 0x6c5671 in __perf_event__synthesize_id_index synthetic-events.c:1862
#5 0x6c5ac0 in perf_event__synthesize_id_index synthetic-events.c:1943
#6 0x458090 in record__synthesize builtin-record.c:2075
#7 0x45a85a in __cmd_record builtin-record.c:2888
#8 0x45deb6 in cmd_record builtin-record.c:4374
#9 0x4e5e33 in run_builtin perf.c:349
#10 0x4e60bf in handle_internal_command perf.c:401
#11 0x4e6215 in run_argv perf.c:448
#12 0x4e653a in main perf.c:555
#13 0x7f8454e4fa72 in __libc_start_main libc-2.32.so[3ea72]
#14 0x43a3ee in _start ??:0
The --overwrite option implies --tail-synthesize, which collects non-sample
events reflecting the system status when recording finishes. However, when
evsel opening fails (e.g., unsupported event 'cycles-ct'), session->evlist
is not initialized and remains NULL. The code unconditionally calls
record__synthesize() in the error path, which iterates through the NULL
evlist pointer and causes a segfault.
To fix it, move the record__synthesize() call inside the error check block, so
it's only called when there was no error during recording, ensuring that evlist
is properly initialized.
Fixes: 4ea648aec0 ("perf record: Add --tail-synthesize option")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 553d18c98a ]
On some machines, it caused troubles when it tried to find kernel
symbols. I think it's because kernel modules and kallsyms are messed
up during load and split.
Basically we want to make sure the kernel map is loaded and the code has
it in the lock_contention_read(). But recently we added more lookups in
the lock_contention_prepare() which is called before _read().
Also the kernel map (kallsyms) may not be the first one in the group
like on ARM. Let's use machine__kernel_map() rather than just loading
the first map.
Reviewed-by: Ian Rogers <irogers@google.com>
Fixes: 688d2e8de2 ("perf lock contention: Add -l/--lock-addr option")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ada5679f1 ]
Using errno is not possible when NOLIBC_IGNORE_ERRNO is set. Use
sys_lseek instead of lseek as that avoids using errno.
Fixes: 665fa8dea9 ("tools/nolibc: add support for directory access")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c485ca3aff ]
There is no errno variable when NOLIBC_IGNORE_ERRNO is defined. As such,
simply print the message with "unknown error" rather than the integer
value of errno.
Fixes: acab7bcdb1 ("tools/nolibc/stdio: add perror() to report the errno value")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fee899c06 ]
The line_len is only set on success. Check the return value instead.
util/hwmon_pmu.c: In function ‘perf_pmus__read_hwmon_pmus’:
util/hwmon_pmu.c:742:20: warning: ‘line_len’ may be used uninitialized [-Wmaybe-uninitialized]
742 | if (line_len > 0 && line[line_len - 1] == '\n')
| ^
util/hwmon_pmu.c:719:24: note: ‘line_len’ was declared here
719 | size_t line_len;
Fixes: 53cc0b351e ("perf hwmon_pmu: Add a tool PMU exposing events from hwmon in sysfs")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2602949b22 ]
I recently got occasional build failures at -Os or -Oz that would always
involve waitpid(), where the assembler would complain about this:
init.s: Error: .size expression for waitpid.constprop.0 does not evaluate to a constant
And without -fno-asynchronous-unwind-tables it could also spit such
errors:
init.s:836: Error: CFI instruction used without previous .cfi_startproc
init.s:838: Error: .cfi_endproc without corresponding .cfi_startproc
init.s: Error: open CFI at the end of file; missing .cfi_endproc directive
A trimmed down reproducer is as simple as this:
int main(int argc, char **argv)
{
int ret, status;
if (argc == 0)
ret = waitpid(-1, &status, 0);
else
ret = waitpid(-1, &status, 0);
return status;
}
It produces the following asm code on x86_64:
.text
.section .text.nolibc_memmove_memcpy
.weak memmove
.weak memcpy
memmove:
memcpy:
movq %rdx, %rcx
(...)
retq
.section .text.nolibc_memset
.weak memset
memset:
xchgl %eax, %esi
movq %rdx, %rcx
pushq %rdi
rep stosb
popq %rax
retq
.type waitpid.constprop.0.isra.0, @function
waitpid.constprop.0.isra.0:
subq $8, %rsp
(...)
jmp *.L5(,%rax,8)
.section .rodata
.align 8
.align 4
.L5:
.quad .L10
(...)
.quad .L4
.text
.L10:
(...)
.cfi_def_cfa_offset 8
ret
.cfi_endproc
.LFE273:
.size waitpid.constprop.0.isra.0, .-waitpid.constprop.0.isra.0
It's a bit dense, but here's the explanation: the compiler has emitted a
".text" statement because it knows it's working in the .text section.
Then, our hand-written asm code for the mem* functions forced the section
to .text.something without the compiler knowing about it, so it thinks
the code is still being emitted for .text. As such, without any .section
statement, the waitpid.constprop.0.isra.0 label is in fact placed in the
previously created section, here .text.nolibc_memset.
The waitpid() function involves a switch/case statement that can be
turned to a jump table, which is what the compiler does with the .rodata
section, and after that it restores .text, which is no longer the
previous .text.nolibc_memset section. Then the CFI statements cross a
section, so does the .size calculation, which explains the error.
While a first approach consisting in placing an explicit ".text" at the
end of these functions was verified to work, it's still unreliable as
it depends on what the compiler remembers having emitted previously. A
better approach is to replace the ".section" with ".pushsection", and
place a ".popsection" at the end, so that these code blocks are agnostic
to where they're placed relative to other blocks.
Fixes: 553845eebd ("tools/nolibc: x86-64: Use `rep movsb` for `memcpy()` and `memmove()`")
Fixes: 12108aa8c1 ("tools/nolibc: x86-64: Use `rep stosb` for `memset()`")
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92664f2e6a ]
A patch to allow specifying FORMAT_AVERAGE to added counters...
broke the internally added counter for Cluster Uncore MHz -- printing it in HEX.
Fixes: dcd1c379b0 ("tools/power turbostat: add format "average" for external attributes")
Reported-by: Andrej Tkalcec <andrej.tkalcec@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1204e5846 ]
Check the error code of evsel__get_arch() in the symbol__annotate().
Previously it checked non-zero value but after the refactoring it does
only for negative values.
Fixes: 0669729eb0 ("perf annotate: Factor out evsel__get_arch()")
Suggested-by: James Clark <james.clark@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tianyou Li <tianyou.li@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 800201997a ]
Events with an X modifier were reordered within a group, for example
slots was made the leader in:
```
$ perf record -e '{cpu/mem-stores/ppu,cpu/slots/uX}' -- sleep 1
```
Fix by making `dont_regroup` evsels always use their index for
sorting. Make the cur_leader, when fixing the groups, be that of
`dont_regroup` evsel so that the `dont_regroup` evsel doesn't become a
leader.
On a tigerlake this patch corrects this and meets expectations in:
```
$ perf stat -e '{cpu/mem-stores/,cpu/slots/uX}' -a -- sleep 0.1
Performance counter stats for 'system wide':
83,458,652 cpu/mem-stores/
2,720,854,880 cpu/slots/uX
0.103780587 seconds time elapsed
$ perf stat -e 'slots,slots:X' -a -- sleep 0.1
Performance counter stats for 'system wide':
732,042,247 slots (48.96%)
643,288,155 slots:X (51.04%)
0.102731018 seconds time elapsed
```
Closes: https://lore.kernel.org/lkml/18f20d38-070c-4e17-bc90-cf7102e1e53d@linux.intel.com/
Fixes: 035c178930 ("perf parse-events: Add 'X' modifier to exclude an event from being regrouped")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7b76f607a ]
The term list when adding an event to a PMU is expected to have the
event name for the alias lookup. Also, set found_supported so that
-EINVAL isn't returned.
Fixes: 62593394f6 ("perf parse-events: Legacy cache names on all
PMUs and lower priority")
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72567c630d ]
find_symbol_hole_containing() fails to find a symbol hole (aka stripped
weak symbol) if its section has no symbols before the hole. This breaks
weak symbol detection if -ffunction-sections is enabled.
Fix that by allowing the interval tree to contain section symbols, which
are always at offset zero for a given section.
Fixes a bunch of (-ffunction-sections) warnings like:
vmlinux.o: warning: objtool: .text.__x64_sys_io_setup+0x10: unreachable instruction
Fixes: 4adb236867 ("objtool: Ignore extra-symbol code")
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
