[ Upstream commit bdb32359ea ]
SPARC T5-2 dts describes some PCI BARs as 64-bit resources without the
pref(etchable) bit (0x83... vs 0xc3... in assigned-addresses) for address
ranges above the 4G threshold. Such resources cannot be placed into a
non-prefetchable PCI bridge window that is capable only of 32-bit
addressing. As such, it looks like the platform is improperly described by
the dts.
The kernel detects this problem (see the IORESOURCE_PREFETCH check in
pci_find_parent_resource()) and fails to assign these BAR resources to the
resource tree due to lack of a compatible bridge window.
Prior to 754babaaf3 ("sparc/PCI: Remove pcibios_enable_device() as they
do nothing extra") SPARC arch code did not test whether device resources
were successfully in the resource tree when enabling a device, effectively
hiding the problem. After removing the arch-specific enable code,
pci_enable_resources() refuses to enable the device when it finds not all
mem resources are assigned, and therefore mpt3sas can't be enabled:
pci 0001:04:00.0: reg 0x14: [mem 0x801110000000-0x80111000ffff 64bit]
pci 0001:04:00.0: reg 0x1c: [mem 0x801110040000-0x80111007ffff 64bit]
pci 0001:04:00.0: BAR 1 [mem 0x801110000000-0x80111000ffff 64bit]: can't claim; no compatible bridge window
pci 0001:04:00.0: BAR 3 [mem 0x801110040000-0x80111007ffff 64bit]: can't claim; no compatible bridge window
mpt3sas 0001:04:00.0: BAR 1 [mem size 0x00010000 64bit]: not assigned; can't enable device
For clarity, this filtered log only shows failures for one mpt3sas device
but other devices fail similarly. In the reported case, the end result with
all the failures is an unbootable system.
Things appeared to "work" before 754babaaf3 ("sparc/PCI: Remove
pcibios_enable_device() as they do nothing extra") because the resource
tree is agnostic to whether PCI BAR resources are properly in the tree or
not. So as long as there was a parent resource (e.g. a root bus resource)
that contains the address range, the resource tree code just places
resource request underneath it without any consideration to the
intermediate BAR resource. While it worked, it's incorrect setup still.
Add an OF fixup to set the IORESOURCE_PREFETCH flag for a 64-bit PCI
resource that has the end address above 4G requiring placement into the
prefetchable window. Also log the issue.
Fixes: 754babaaf3 ("sparc/PCI: Remove pcibios_enable_device() as they do nothing extra")
Reported-by: Nathaniel Roach <nroach44@gmail.com>
Closes: https://github.com/sparclinux/issues/issues/22
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Nathaniel Roach <nroach44@gmail.com>
Link: https://patch.msgid.link/20251124170411.3709-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e5be092ff ]
These marcos are not used after commit b5b4287acc ("riscv: mm: Use
hint address in mmap if available"). Cleanup VA_USER_XXX definitions
in asm/pgtable.h.
Fixes: b5b4287acc ("riscv: mm: Use hint address in mmap if available")
Signed-off-by: Guo Ren (Alibaba DAMO Academy) <guoren@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20251201005850.702569-1-guoren@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8632180daf ]
The Zk extension is a bundle consisting of Zkn, Zkr, and Zkt. The Zkn
extension itself is a bundle consisting of Zbkb, Zbkc, Zbkx, Zknd, Zkne,
and Zknh.
The current implementation of riscv_zk_bundled_exts manually listed
the dependencies but missed RISCV_ISA_EXT_ZKNH.
Fix this by introducing a RISCV_ISA_EXT_ZKN macro that lists the Zkn
components and using it in both riscv_zk_bundled_exts and
riscv_zkn_bundled_exts.
This adds the missing Zknh extension to Zk and reduces code duplication.
Fixes: 0d8295ed97 ("riscv: add ISA extension parsing for scalar crypto")
Link: https://patch.msgid.link/20231114141256.126749-4-cleger@rivosinc.com/
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Link: https://patch.msgid.link/20251223-zk-missing-zknh-v1-1-b627c990ee1a@riscstar.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a988caeed9 ]
The commit 616effc027 ("arm64: dts: imx8: Fix lpuart DMA channel
order") swap uart rx and tx channel at common imx8-ss-dma.dtsi. But miss
update imx8qm-ss-dma.dtsi.
The commit 5a8e9b022e ("arm64: dts: imx8qm-ss-dma: Pass lpuart
dma-names") just simple add dma-names as binding doc requirement.
Correct lpuart0 - lpuart3 dma rx and tx channels, and use defines for
the FSL_EDMA_RX flag.
Fixes: 5a8e9b022e ("arm64: dts: imx8qm-ss-dma: Pass lpuart dma-names")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c63749a7dd ]
Add missing 'clocks' property to LAN8740Ai PHY node, to allow the PHY driver
to manage LAN8740Ai CLKIN reference clock supply. This fixes sporadic link
bouncing caused by interruptions on the PHY reference clock, by letting the
PHY driver manage the reference clock and assure there are no interruptions.
This follows the matching PHY driver recommendation described in commit
bedd8d78ab ("net: phy: smsc: LAN8710/20: add phy refclk in support")
Fixes: 8d6712695b ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdf4e631ee ]
On this SoM eqos is the primary ethernet interface, Ka-Ro fuses the
address for it in eth_mac1, eth_mac2 seems to be left unfused. In their
downstream u-boot they fetch it from eth_mac1 [1][2], by setting alias
of eqos to ethernet0, the driver then fetches the mac address based on
the alias number.
Set eqos to read from eth_mac1 instead of eth_mac2. Also set fec to
point at eth_mac2 as it may be fused later even though it is disabled
by default.
With this changed barebox is now capable of loading the correct address.
Link: 3805432784/drivers/net/dwc_eth_qos.c (L1167) [1]
Link: 3805432784/arch/arm/dts/imx8mp-karo.dtsi (L12) [2]
Fixes: bac63d7c5f ("arm64: dts: freescale: add Ka-Ro Electronics tx8p-ml81 COM")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 056c688751 ]
The compatibles should include the SoM compatible, this board is based
on the Ka-Ro TX8P-ML81 SoM, so add it to allow using shared code in the
bootloader which uses upstream Linux devicetrees as a base.
Also add the hardware revision to the board compatible to handle
revision specific quirks in the bootloader/userspace.
This is a breaking change, but it is early enough that it can be
corrected without causing any issues.
Fixes: 03f07be54c ("arm64: dts: freescale: Add the GOcontroll Moduline Display baseboard")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6a4eedd49 ]
RTC interrupt level should be set to "LOW". This was revealed by the
introduction of commit:
f181987ef4 ("rtc: m41t80: use IRQ flags obtained from fwnode")
which changed the way IRQ type is obtained.
Fixes: 56c27310c1 ("ARM: dts: imx: Add Advantech BA-16 Qseven module")
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca643894a3 ]
For SD card, according to the spec requirement, for sd card power reset
operation, it need sd card supply voltage to be lower than 0.5v and keep
over 1ms, otherwise, next time power back the sd card supply voltage to
3.3v, sd card can't support SD3.0 mode again.
To match such requirement on imx8qm-mek board, add 4.8ms delay between
sd power off and power on.
Fixes: 307fd14d4b ("arm64: dts: imx: add imx8qm mek support")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0d8678c2f ]
light sensor isl29023 share the interrupt with lsm303arg, but these
two devices use different interrupt type. According to the datasheet
of these two devides, both support low level trigger type, so correct
the interrupt type here to avoid the following error log:
irq: type mismatch, failed to map hwirq-11 for gpio@5d0c0000!
Fixes: 9918092cbb ("arm64: dts: imx8qm-mek: add i2c0 and children devices")
Fixes: 1d8a9f043a ("arm64: dts: imx8: use defines for interrupts")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9aeed90419 ]
Similar in nature to ab10727660. glibc-2.42
drops the legacy termio struct, but the ioctls.h header still defines some
TC* constants in terms of termio (via sizeof). Hardcode the values instead.
This fixes building Python for example, which falls over like:
./Modules/termios.c:1119:16: error: invalid application of 'sizeof' to incomplete type 'struct termio'
Link: https://bugs.gentoo.org/961769
Link: https://bugs.gentoo.org/962600
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/6ebd3451908785cad53b50ca6bc46cfe9d6bc03c.1764922497.git.sam@gentoo.org
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fedadc4137 ]
gup_pgd_range() is invoked with disabled interrupts and invokes
__kmap_local_page_prot() via pte_offset_map(), gup_p4d_range().
With HIGHPTE enabled, __kmap_local_page_prot() invokes kmap_high_get()
which uses a spinlock_t via lock_kmap_any(). This leads to an
sleeping-while-atomic error on PREEMPT_RT because spinlock_t becomes a
sleeping lock and must not be acquired in atomic context.
The loop in map_new_virtual() uses wait_queue_head_t for wake up which
also is using a spinlock_t.
Since HIGHPTE is rarely needed at all, turn it off for PREEMPT_RT
to allow the use of get_user_pages_fast().
[arnd: rework patch to turn off HIGHPTE instead of HAVE_PAST_GUP]
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 809ef03d6d ]
In the csky_cmpxchg_fixup function, it is incorrect to use the global
variable csky_cmpxchg_stw to determine the address where the exception
occurred.The global variable csky_cmpxchg_stw stores the opcode at the
time of the exception, while &csky_cmpxchg_stw shows the address where
the exception occurred.
Signed-off-by: Yang Li <yang.li85200@gmail.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cd0caaf200 upstream.
I3C2 is in WAKEUP domain. Its pclk should be IMX95_CLK_BUSWAKEUP.
Fixes: 969497ebef ("arm64: dts: imx95: Add i3c1 and i3c2")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66562b66dc upstream.
Since commit 4b47a3aefb ("kbuild: Restore pattern to avoid stripping
.rela.dyn from vmlinux") vmlinux has .rel*.dyn preserved. Therefore, use
vmlinux to produce Image, not vmlinux.unstripped.
Doing so fixes booting a RELOCATABLE=y Image with kexec. The problem is
caused by this chain of events:
- Since commit 3e86e4d74c ("kbuild: keep .modinfo section in
vmlinux.unstripped"), vmlinux.unstripped gets a .modinfo section.
- The .modinfo section has SHF_ALLOC, so it ends up in Image, at the end
of it.
- The Image header's image_size field does not expect to include
.modinfo and does not account for it, since it should not be in Image.
- If .modinfo is large enough, the file size of Image ends up larger
than image_size, which eventually leads to it failing
sanity_check_segment_list().
Using vmlinux instead of vmlinux.unstripped means that the unexpected
.modinfo section is gone from Image, fixing the file size problem.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c ("kbuild: keep .modinfo section in vmlinux.unstripped")
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Link: https://patch.msgid.link/20251230-riscv-vmlinux-not-unstripped-v1-1-15f49df880df@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bdf3f41760 upstream.
TCR2_ELx.E0POE is set during smp_init().
However, this bit is not reprogrammed when the CPU enters suspension and
later resumes via cpu_resume(), as __cpu_setup() does not re-enable E0POE
and there is no save/restore logic for the TCR2_ELx system register.
As a result, the E0POE feature no longer works after cpu_resume().
To address this, save and restore TCR2_EL1 in the cpu_suspend()/cpu_resume()
path, rather than adding related logic to __cpu_setup(), taking into account
possible future extensions of the TCR2_ELx feature.
Fixes: bf83dae90f ("arm64: enable the Permission Overlay Extension for EL0")
Cc: <stable@vger.kernel.org> # 6.12.x
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73721d8676 upstream.
Enhance the bpf_arch_text_poke() function to enable accurate location
of BPF program entry points.
When modifying the entry point of a BPF program, skip the "move t0, ra"
instruction to ensure the correct logic and copy of the jump address.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61319d15a5 upstream.
Call the next bpf prog and skip the first instruction of TCC
initialization.
A total of 7 instructions are skipped:
'move t0, ra' 1 inst
'move_imm + jirl' 5 inst
'addid REG_TCC, zero, 0' 1 inst
Relevant test cases: the tailcalls test item in selftests/bpf.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26138762d9 upstream.
Remove the previous restrictions that blocked the tracing of kernel
module functions. Fix the issue that previously caused kernel lockups
when attempting to trace module functions.
Before entering the trampoline code, the return address register ra
shall store the address of the next assembly instruction after the
'bl trampoline' instruction, which is the traced function address, and
the register t0 shall store the parent function return address. Refine
the trampoline return logic to ensure that register data remains correct
when returning to both the traced function and the parent function.
Before this patch was applied, the module_attach test in selftests/bpf
encountered a deadlock issue. This was caused by an incorrect jump
address after the trampoline execution, which resulted in an infinite
loop within the module function.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d314e1f482 upstream.
Modify the build_prologue() function to ensure the return address
register ra is saved to t0 before entering trampoline operations.
This change ensures the accurate return address handling when a BPF
program calls another BPF program, preventing errors in the BPF-to-BPF
call chain.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f5a238f24 upstream.
The kfunc calls are native calls so they should follow LoongArch calling
conventions. Sign extend its arguments properly to avoid kernel panic.
This is done by adding a new emit_abi_ext() helper. The emit_abi_ext()
helper performs extension in place meaning a value already store in the
target register (Note: this is different from the existing sign_extend()
helper and thus we can't reuse it).
Cc: stable@vger.kernel.org
Fixes: 5dc615520c ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb71f5c433 upstream.
The bpf_tail_call() index should be treated as a u32 value. Let's
zero-extend it to avoid calling wrong BPF progs. See similar fixes
for x86 [1]) and arm64 ([2]) for more details.
[1]: 90caccdd8c
[2]: 16338a9b3a
Cc: stable@vger.kernel.org
Fixes: 5dc615520c ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45cb47c628 upstream.
Refactor the register restoration sequence in the ftrace_common_return
function to clearly distinguish between the logic of normal returns and
direct call returns in function tracing scenarios. The logic is as
follows:
1. In the case of a normal return, the execution flow returns to the
traced function, and ftrace must ensure that the register data is
consistent with the state when the function was entered.
ra = parent return address; t0 = traced function return address.
2. In the case of a direct call return, the execution flow jumps to the
custom trampoline function, and ftrace must ensure that the register
data is consistent with the state when ftrace was entered.
ra = traced function return address; t0 = parent return address.
Cc: stable@vger.kernel.org
Fixes: 9cdc3b6a29 ("LoongArch: ftrace: Add direct call support")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a258a3cb18 upstream.
It is better to use unsigned long rather than long for _end and _text to
calculate the kernel length.
Cc: stable@vger.kernel.org # v6.3+
Fixes: e5f02b51fa ("LoongArch: Add support for kernel address space layout randomization (KASLR)")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a71df151e upstream.
The __pmd() and __pte() helper macros provide the correct initialization
syntax and abstraction for the pmd_t and pte_t types.
Use __pmd() to fix follow warning about __swp_entry_to_pmd() with gcc-15
under specific configs [1] :
In file included from ./include/linux/pgtable.h:6,
from ./include/linux/mm.h:31,
from ./include/linux/pagemap.h:8,
from arch/loongarch/mm/init.c:14:
./include/linux/swapops.h: In function ‘swp_entry_to_pmd’:
./arch/loongarch/include/asm/pgtable.h:302:34: error: missing braces around initializer [-Werror=missing-braces]
302 | #define __swp_entry_to_pmd(x) ((pmd_t) { (x).val | _PAGE_HUGE })
| ^
./include/linux/swapops.h:559:16: note: in expansion of macro ‘__swp_entry_to_pmd’
559 | return __swp_entry_to_pmd(arch_entry);
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Also update __swp_entry_to_pte() to use __pte() for consistency.
[1]. https://download.01.org/0day-ci/archive/20251119/202511190316.luI90kAo-lkp@intel.com/config
Cc: stable@vger.kernel.org
Signed-off-by: Yuli Wang <wangyl5933@chinaunicom.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c250aecef upstream.
When CONFIG_RANDSTRUCT enabled, members of task_struct are randomized.
There is a chance that TASK_STACK_CANARY be out of 12bit immediate's
range and causes build errors. TASK_STACK_CANARY is naturally aligned,
so fix it by replacing ld.d/st.d with ldptr.d/stptr.d which have 14bit
immediates.
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511240656.0NaPcJs1-lkp@intel.com/
Suggested-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a91b446e35 upstream.
Now the optimized version of arch_dup_task_struct() for LoongArch
assumes 'thread' is the last member of 'task_struct'. But this is
not true if CONFIG_RANDSTRUCT is enabled after Linux-6.16.
So fix the arch_dup_task_struct() function for CONFIG_RANDSTRUCT by
copying the whole 'task_struct'.
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1de0ae21f1 upstream.
For thread_count, the current calculation method has a maximum of 255,
which may not be sufficient in the future. Therefore, we are correcting
it now.
Reference: SMBIOS Specification, 7.5 Processor Information (Type 4)[1]
[1]: https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.9.0.pdf
Cc: stable@vger.kernel.org
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf3fa8f232 upstream.
Loongson-2K3000 has a new PCI ID (0x7a46) for its display controller,
Add it for pci_fixup_vgadev() since we prefer a discrete graphics card
as default boot device if present.
Cc: stable@vger.kernel.org
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc6bcf9ac4 upstream.
Patch series "powerpc/pseries/cmm: two smaller fixes".
Two smaller fixes identified while doing a bigger rework.
This patch (of 2):
We always have to initialize the balloon_dev_info, even when compaction is
not configured in: otherwise the containing list and the lock are left
uninitialized.
Likely not many such configs exist in practice, but let's CC stable to
be sure.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251021100606.148294-1-david@redhat.com
Link: https://lkml.kernel.org/r/20251021100606.148294-2-david@redhat.com
Fixes: fe030c9b85 ("powerpc/pseries/cmm: Implement balloon compaction")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0da2ba35c0 upstream.
Let's properly adjust BALLOON_MIGRATE like the other drivers.
Note that the INFLATE/DEFLATE events are triggered from the core when
enqueueing/dequeueing pages.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251021100606.148294-3-david@redhat.com
Fixes: fe030c9b85 ("powerpc/pseries/cmm: Implement balloon compaction")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fb1d3ce3e upstream.
When the kernel leaves to userspace via syscall_restore_rfi(), the
W bit is not set in the new PSW. This doesn't cause any problems
because there's no 64 bit userspace for parisc. Simple static binaries
are usually loaded at addresses way below the 32 bit limit so the W bit
doesn't matter.
Fix this by setting the W bit when TIF_32BIT is not set.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1aa4524c0c upstream.
In wide mode, the IASQ contain the upper part of the GVA
during interruption. This needs to be reversed before
the space is used - otherwise it contains parts of IAOQ.
See Page 2-13 "Processing Resources / Interruption Instruction
Address Queues" in the Parisc 2.0 Architecture Manual page 2-13
for an explanation.
The IAOQ/IASQ space_adjust was skipped for other interruptions
than itlb misses. However, the code in handle_interruption()
checks whether iasq[0] contains a valid space. Due to the not
masked out bits this match failed and the process was killed.
Also add space_adjust for IAOQ1/IASQ1 so ptregs contains sane values.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec9d588391 upstream.
During upstreaming the order of clocks was adjusted to match the
upstream sort order, but mistakently freq-table-hz wasn't re-ordered
with the new order.
Fix that by moving the entry for the ICE clk to the last place.
Fixes: 5a814af5fc ("arm64: dts: qcom: sm6350: Add UFS nodes")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20251023-sm6350-ufs-things-v3-1-b68b74e29d35@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22f0ae971c upstream.
In order to set the AMCR register, which configures the
memory-region split between ospi1 and ospi2, we need to
identify the ospi instance.
By using memory-region-names, it allows to identify the
ospi instance this memory-region belongs to.
Fixes: cad2492de9 ("arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20251031-upstream_fix_dts_omm-v4-1-e4a059a50074@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00312419f0 upstream.
On systems using the hash MMU, there is a software SLB preload cache that
mirrors the entries loaded into the hardware SLB buffer. This preload
cache is subject to periodic eviction — typically after every 256 context
switches — to remove old entry.
To optimize performance, the kernel skips switch_mmu_context() in
switch_mm_irqs_off() when the prev and next mm_struct are the same.
However, on hash MMU systems, this can lead to inconsistencies between
the hardware SLB and the software preload cache.
If an SLB entry for a process is evicted from the software cache on one
CPU, and the same process later runs on another CPU without executing
switch_mmu_context(), the hardware SLB may retain stale entries. If the
kernel then attempts to reload that entry, it can trigger an SLB
multi-hit error.
The following timeline shows how stale SLB entries are created and can
cause a multi-hit error when a process moves between CPUs without a
MMU context switch.
CPU 0 CPU 1
----- -----
Process P
exec swapper/1
load_elf_binary
begin_new_exc
activate_mm
switch_mm_irqs_off
switch_mmu_context
switch_slb
/*
* This invalidates all
* the entries in the HW
* and setup the new HW
* SLB entries as per the
* preload cache.
*/
context_switch
sched_migrate_task migrates process P to cpu-1
Process swapper/0 context switch (to process P)
(uses mm_struct of Process P) switch_mm_irqs_off()
switch_slb
load_slb++
/*
* load_slb becomes 0 here
* and we evict an entry from
* the preload cache with
* preload_age(). We still
* keep HW SLB and preload
* cache in sync, that is
* because all HW SLB entries
* anyways gets evicted in
* switch_slb during SLBIA.
* We then only add those
* entries back in HW SLB,
* which are currently
* present in preload_cache
* (after eviction).
*/
load_elf_binary continues...
setup_new_exec()
slb_setup_new_exec()
sched_switch event
sched_migrate_task migrates
process P to cpu-0
context_switch from swapper/0 to Process P
switch_mm_irqs_off()
/*
* Since both prev and next mm struct are same we don't call
* switch_mmu_context(). This will cause the HW SLB and SW preload
* cache to go out of sync in preload_new_slb_context. Because there
* was an SLB entry which was evicted from both HW and preload cache
* on cpu-1. Now later in preload_new_slb_context(), when we will try
* to add the same preload entry again, we will add this to the SW
* preload cache and then will add it to the HW SLB. Since on cpu-0
* this entry was never invalidated, hence adding this entry to the HW
* SLB will cause a SLB multi-hit error.
*/
load_elf_binary continues...
START_THREAD
start_thread
preload_new_slb_context
/*
* This tries to add a new EA to preload cache which was earlier
* evicted from both cpu-1 HW SLB and preload cache. This caused the
* HW SLB of cpu-0 to go out of sync with the SW preload cache. The
* reason for this was, that when we context switched back on CPU-0,
* we should have ideally called switch_mmu_context() which will
* bring the HW SLB entries on CPU-0 in sync with SW preload cache
* entries by setting up the mmu context properly. But we didn't do
* that since the prev mm_struct running on cpu-0 was same as the
* next mm_struct (which is true for swapper / kernel threads). So
* now when we try to add this new entry into the HW SLB of cpu-0,
* we hit a SLB multi-hit error.
*/
WARNING: CPU: 0 PID: 1810970 at arch/powerpc/mm/book3s64/slb.c:62
assert_slb_presence+0x2c/0x50(48 results) 02:47:29 [20157/42149]
Modules linked in:
CPU: 0 UID: 0 PID: 1810970 Comm: dd Not tainted 6.16.0-rc3-dirty #12
VOLUNTARY
Hardware name: IBM pSeries (emulated by qemu) POWER8 (architected)
0x4d0200 0xf000004 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c00000000015426c LR: c0000000001543b4 CTR: 0000000000000000
REGS: c0000000497c77e0 TRAP: 0700 Not tainted (6.16.0-rc3-dirty)
MSR: 8000000002823033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 28888482 XER: 00000000
CFAR: c0000000001543b0 IRQMASK: 3
<...>
NIP [c00000000015426c] assert_slb_presence+0x2c/0x50
LR [c0000000001543b4] slb_insert_entry+0x124/0x390
Call Trace:
0x7fffceb5ffff (unreliable)
preload_new_slb_context+0x100/0x1a0
start_thread+0x26c/0x420
load_elf_binary+0x1b04/0x1c40
bprm_execve+0x358/0x680
do_execveat_common+0x1f8/0x240
sys_execve+0x58/0x70
system_call_exception+0x114/0x300
system_call_common+0x160/0x2c4
>From the above analysis, during early exec the hardware SLB is cleared,
and entries from the software preload cache are reloaded into hardware
by switch_slb. However, preload_new_slb_context and slb_setup_new_exec
also attempt to load some of the same entries, which can trigger a
multi-hit. In most cases, these additional preloads simply hit existing
entries and add nothing new. Removing these functions avoids redundant
preloads and eliminates the multi-hit issue. This patch removes these
two functions.
We tested process switching performance using the context_switch
benchmark on POWER9/hash, and observed no regression.
Without this patch: 129041 ops/sec
With this patch: 129341 ops/sec
We also measured SLB faults during boot, and the counts are essentially
the same with and without this patch.
SLB faults without this patch: 19727
SLB faults with this patch: 19786
Fixes: 5434ae7462 ("powerpc/64s/hash: Add a SLB preload cache")
cc: stable@vger.kernel.org
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/0ac694ae683494fe8cadbd911a1a5018d5d3c541.1761834163.git.ritesh.list@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78fc63ffa7 upstream.
On 32-bit book3s with hash-MMUs, tlb_flush() was a no-op. This was
unnoticed because all uses until recently were for unmaps, and thus
handled by __tlb_remove_tlb_entry().
After commit 4a18419f71 ("mm/mprotect: use mmu_gather") in kernel 5.19,
tlb_gather_mmu() started being used for mprotect as well. This caused
mprotect to simply not work on these machines:
int *ptr = mmap(NULL, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
*ptr = 1; // force HPTE to be created
mprotect(ptr, 4096, PROT_READ);
*ptr = 2; // should segfault, but succeeds
Fixed by making tlb_flush() actually flush TLB pages. This finally
agrees with the behaviour of boot3s64's tlb_flush().
Fixes: 4a18419f71 ("mm/mprotect: use mmu_gather")
Cc: stable@vger.kernel.org
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Dave Vasilevsky <dave@vasilevsky.ca>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251116-vasi-mprotect-g3-v3-1-59a9bd33ba00@vasilevsky.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51f89c488f upstream.
The SoC pin Y1 is incorrectly defined in the WKUP Pinmux device-tree node
(pinctrl@4301c000) leading to the following silent failure:
pinctrl-single 4301c000.pinctrl: mux offset out of range: 0x1dc (0x178)
According to the datasheet for the J721E SoC [0], the pin Y1 belongs to the
MAIN Pinmux device-tree node (pinctrl@11c000). This is confirmed by the
address of the pinmux register for it on page 142 of the datasheet which is
0x00011C1DC.
Hence fix it.
[0]: https://www.ti.com/lit/ds/symlink/tda4vm.pdf
Fixes: 97b67cc102 ("arm64: dts: ti: k3-j721e-sk: Add DT nodes for power regulators")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Link: https://patch.msgid.link/20251119160148.2752616-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2f393c228c ]
A few checks were missing in gmap_helper_zap_one_page(), which can lead
to memory corruption in the guest under specific circumstances.
Add the missing checks.
Fixes: 5deafa27d9 ("KVM: s390: Fix to clear PTE when discarding a swapped page")
Cc: stable@vger.kernel.org
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
[ adapted ptep_zap_softleaf_entry() and softleaf_from_pte() calls to ptep_zap_swap_entry() and pte_to_swp_entry() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d17104506 upstream.
All microcode patches up to the proper BIOS Entrysign fix are loaded
only after the sha256 signature carried in the driver has been verified.
Microcode patches after the Entrysign fix has been applied, do not need
that signature verification anymore.
In order to not abandon machines which haven't received the BIOS update
yet, add the capability to select which microcode patch to load.
The corresponding microcode container supplied through firmware-linux
has been modified to carry two patches per CPU type
(family/model/stepping) so that the proper one gets selected.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Waiman Long <longman@redhat.com>
Link: https://patch.msgid.link/20251027133818.4363-1-bp@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5654889a94 upstream.
On some flexcom nodes related to uart, the fifo sizes were wrong: fix
them to 32 data.
Fixes: 7540629e2f ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Cc: stable@vger.kernel.org # 5.15+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20251114103313.20220-2-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
