commit bf72b4b7bb upstream.
In vmw_compat_shader_add(), the return value check of vmw_shader_alloc()
is not proper. Modify the check for the return pointer 'res'.
Found by code review and compiled on ubuntu 20.04.
Fixes: 18e4a4669c ("drm/vmwgfx: Fix compat shader namespace")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20251224091105.1569464-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9380dc33cd upstream.
The switch from devm_kzalloc() + drm_panel_init() to
devm_drm_panel_alloc() introduced a regression.
Several panel descriptors do not set connector_type. For those panels,
panel_simple_probe() used to compute a connector type (currently DPI as a
fallback) and pass that value to drm_panel_init(). After the conversion
to devm_drm_panel_alloc(), the call unconditionally used
desc->connector_type instead, ignoring the computed fallback and
potentially passing DRM_MODE_CONNECTOR_Unknown, which
drm_panel_bridge_add() does not allow.
Move the connector_type validation / fallback logic before the
devm_drm_panel_alloc() call and pass the computed connector_type to
devm_drm_panel_alloc(), so panels without an explicit connector_type
once again get the DPI default.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: de04bb0089 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/stable/20251126-lcd_panel_connector_type_fix-v2-1-c15835d1f7cb%40microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251218-lcd_panel_connector_type_fix-v3-1-ddcea6d8d7ef@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ab3d4353b upstream.
The connector type for the DataImage SCF0700C48GGU18 panel is missing and
devm_drm_panel_bridge_add() requires connector type to be set. This leads
to a warning and a backtrace in the kernel log and panel does not work:
"
WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8
"
The warning is triggered by a check for valid connector type in
devm_drm_panel_bridge_add(). If there is no valid connector type
set for a panel, the warning is printed and panel is not added.
Fill in the missing connector type to fix the warning and make
the panel operational once again.
Cc: stable@vger.kernel.org
Fixes: 97ceb1fb08 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260110152750.73848-1-marex@nabladev.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e9bc6be0f upstream.
For a while, I've been seeing a strange issue where some (usually not all)
of the display DMA channels will suddenly hang, particularly when there is
a visible cursor on the screen that is being frequently updated, and
especially when said cursor happens to go between two screens. While this
brings back lovely memories of fixing Intel Skylake bugs, I would quite
like to fix it :).
It turns out the problem that's happening here is that we're managing to
reach nv50_head_flush_set() in our atomic commit path without actually
holding nv50_disp->mutex. This means that cursor updates happening in
parallel (along with any other atomic updates that need to use the core
channel) will race with eachother, which eventually causes us to corrupt
the pushbuffer - leading to a plethora of various GSP errors, usually:
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000218 00102680 00000004 00800003
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 0000021c 00040509 00000004 00000001
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000000 00000000 00000001 00000001
The reason this is happening is because generally we check whether we need
to set nv50_atom->lock_core at the end of nv50_head_atomic_check().
However, curs507a_prepare is called from the fb_prepare callback, which
happens after the atomic check phase. As a result, this can lead to commits
that both touch the core channel but also don't grab nv50_disp->mutex.
So, fix this by making sure that we set nv50_atom->lock_core in
cus507a_prepare().
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 1590700d94 ("drm/nouveau/kms/nv50-: split each resource type into their own source files")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patch.msgid.link/20251219215344.170852-2-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80614c5098 upstream.
If dqm->ops.initialize() fails, add deallocate_hiq_sdma_mqd()
to release the memory allocated by allocate_hiq_sdma_mqd().
Move deallocate_hiq_sdma_mqd() up to ensure proper function
visibility at the point of use.
Fixes: 11614c36bc ("drm/amdkfd: Allocate MQD trunk for HIQ and SDMA")
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b7cccc8286)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6dff005fc upstream.
These IOCTLs shouldn't be called when userqs are not
enabled. Make sure they are enabled before executing
the IOCTLs.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d967509651)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 292e5757b2 upstream.
Fix copy&paste error, that should have been an assignment instead of an or,
otherwise MTYPE_UC 0x3 can not be updated to MTYPE_RW 0x1.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fc1366016a)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28695ca09d upstream.
When an eGPU is unplugged the KFD topology should also be destroyed
for that GPU. This never happens because the fini_sw callbacks never
get to run. Run them manually before calling amdgpu_device_ip_fini_early()
when a device has already been disconnected.
This location is intentionally chosen to make sure that the kfd locking
refcount doesn't get incremented unintentionally.
Cc: kent.russell@amd.com
Closes: https://community.frame.work/t/amd-egpu-on-linux/8691/33
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a23e7b433)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52d3d115e9 upstream.
Internal backlight levels are initialised from ACPI but the values
are sometimes out of sync with the levels in effect until there has
been a read from hardware (eg triggered by reading from sysfs).
This means that the first drm_commit can cause the levels to be set
to a different value than the actual starting one, which results in
a sudden change in brightness.
This path shows the problem (when the values are out of sync):
amdgpu_dm_atomic_commit_tail()
-> amdgpu_dm_commit_streams()
-> amdgpu_dm_backlight_set_level(..., dm->brightness[n])
This patch calls the backlight ops get_brightness explicitly
at the end of backlight registration to make sure dm->brightness[n]
is in sync with the actual hardware levels.
Fixes: 2fe87f54ab ("drm/amd/display: Set default brightness according to ACPI")
Signed-off-by: Vivek Das Mohapatra <vivek@collabora.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 318b1c36d8)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fee5007765 upstream.
[Why]
DP-HDMI dongles can execeed bandwidth requirements on high resolution
monitors. This can lead to pruning the high resolution modes.
HDMI 1.3 bumped the clock to 340MHz, but display code never matched it.
[How]
Set default to (DVI) 165MHz. Once HDMI display is identified update
to 340MHz.
Reported-by: Dianne Skoll <dianne@skoll.ca>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4780
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ac1e65d8ad)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b2426a211d ]
The user mode queue keeps a pointer to the most recent fence in
userq->last_fence. This pointer holds an extra dma_fence reference.
When the queue is destroyed, we free the fence driver and its xarray,
but we forgot to drop the last_fence reference.
Because of the missing dma_fence_put(), the last fence object can stay
alive when the driver unloads. This leaves an allocated object in the
amdgpu_userq_fence slab cache and triggers
This is visible during driver unload as:
BUG amdgpu_userq_fence: Objects remaining on __kmem_cache_shutdown()
kmem_cache_destroy amdgpu_userq_fence: Slab cache still has objects
Call Trace:
kmem_cache_destroy
amdgpu_userq_fence_slab_fini
amdgpu_exit
__do_sys_delete_module
Fix this by putting userq->last_fence and clearing the pointer during
amdgpu_userq_fence_driver_free().
This makes sure the fence reference is released and the slab cache is
empty when the module exits.
v2: Update to only release userq->last_fence with dma_fence_put()
(Christian)
Fixes: edc762a51c ("drm/amdgpu/userq: move some code around")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8e051e38a8)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18dbcfb46f ]
Each queue of the process is individually removed and there is not need
to suspend whole mes. Suspending mes stops kernel mode queues also
causing unnecessary timeouts when running mixed work loads
Fixes: 079ae5118e ("drm/amdkfd: fix suspend/resume all calls in mes based eviction path")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4765
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3fd20580b9)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a1253ba50 ]
[Why]
The PSR message was moved in commit 4321742c39 ("drm/amd/display:
Move PSR support message into amdgpu_dm"). This message however shows
for every single link without showing which link is which. This can
send a confusing message to the user.
[How]
Add link name into the message.
Fixes: 4321742c39 ("drm/amd/display: Move PSR support message into amdgpu_dm")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99f77f6229)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cb6278b44 ]
When driver not support atomic, fb using plane->fb rather than
plane->state->fb.
Fixes: fe151ed7af ("drm/amdgpu: add generic display panic helper code")
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2f2a72de67)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f6721b767 ]
The write of cfgdone bits always done at .atomic_flush.
When userspace makes plane zpos changes of two crtc within one commit,
at the .atomic_begin stage, crtcN will never receive the "layer change
cfg done" event of crtcM because crtcM has not yet written "cfgdone".
So only wait when there is pending cfgdone bits to avoid long timeout.
Fixes: 3e89a8c683 ("drm/rockchip: vop2: Fix the update of LAYER/PORT select registers when there are multi display output on rk3588/rk3568")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250718064120.8811-2-andyshrk@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fae82450d ]
According to the implementation of read_poll_timeout_atomic, if the
delay time is 0, it will only use a simple loop based on timeout_us to
decrement the count. Therefore, the final timeout time will differ
significantly from the set timeout time. So, here we set a specific
delay time to ensure that the calculation of the timeout duration
is accurate.
Fixes: 3e89a8c683 ("drm/rockchip: vop2: Fix the update of LAYER/PORT select registers when there are multi display output on rk3588/rk3568")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250718064120.8811-1-andyshrk@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37a0cff455 ]
Some of the warnings need to be reordered between these two functions
in order to be correct. This has happened multiple times.
Merging them solves this problem once and for all.
Fixes: d6667f0ddf ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260107152059.3048329-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9186faeae ]
HW version 10 does not have GB Surfaces so there is no backing buffer for
surface backed FBs. This would result in a nullptr dereference and crash
the driver causing a black screen.
Fixes: 965544150d ("drm/vmwgfx: Refactor cursor handling")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20251114203703.1946616-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14adddc653 ]
After resume from suspend to RAM, the following splash is generated if
the HDMI driver is probed (independent of a connected cable):
[ 1194.484052] irq 80: nobody cared (try booting with the "irqpoll" option)
[ 1194.484074] CPU: 0 UID: 0 PID: 627 Comm: rtcwake Not tainted 6.17.0-rc7-g96f1a11414b3 #1 PREEMPT
[ 1194.484082] Hardware name: Rockchip RK3576 EVB V10 Board (DT)
[ 1194.484085] Call trace:
[ 1194.484087] ... (stripped)
[ 1194.484283] handlers:
[ 1194.484285] [<00000000bc363dcb>] dw_hdmi_qp_main_hardirq [dw_hdmi_qp]
[ 1194.484302] Disabling IRQ #80
Apparently the HDMI IP is losing part of its state while the system
is suspended and generates spurious interrupts during resume. The
bug has not yet been noticed, as system suspend does not yet work
properly on upstream kernel with either the Rockchip RK3588 or RK3576
platform.
Fixes: 128a9bf8ac ("drm/rockchip: Add basic RK3588 HDMI output support")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251014-rockchip-hdmi-suspend-fix-v1-1-983fcbf44839@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dc2d5ddb19 upstream.
On disconnect drm_atomic_helper_disable_all() is called which
sets both the fb and crtc for a plane to NULL before invoking a commit.
This causes a kernel oops on every display disconnect.
Add guards for those dereferences.
Cc: <stable@vger.kernel.org> # 6.18.x
Fixes: 73cfd166e0 ("drm/gud: Replace simple display pipe with DRM atomic helpers")
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Reviewed-by: Ruben Wauters <rubenru09@aol.com>
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Link: https://patch.msgid.link/20251231055039.44266-1-me@shenghaoyang.info
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 969faea4e9 ]
Pass character "0" rather than NULL terminator to properly format
queue restoration SMI events. Currently, the NULL terminator precedes
the newline character that is intended to delineate separate events
in the SMI event buffer, which can break userspace parsers.
Signed-off-by: Brian Kocoloski <brian.kocoloski@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6e7143e5e6)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3886b198bd ]
[why]
need to enable APG_CLOCK_ENABLE enable first
also need to wake up az from D3 before access az block
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bf5e396957)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc8a887de1 ]
v1:
the PMFW didn't initialize the PCIe DPM parameters
and requires the KMD to actively provide these parameters.
v2:
clean & remove unused code logic (lijo)
Fixes: 1a18607c07 ("drm/amd/pm: override pcie dpm parameters only if it is necessary")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4671
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b0dbd5db7c)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d3352e73a ]
RUST_FW_LOADER_ABSTRACTIONS was depended on by NOVA_CORE, but NOVA_CORE
is selected by DRM_NOVA. This creates a situation where, if DRM_NOVA is
selected, NOVA_CORE gets enabled but not RUST_FW_LOADER_ABSTRACTIONS,
which results in a build error.
Since the firmware loader is an implementation detail of the driver, it
should be enabled along with it, so change the "depends on" to a
"select".
Fixes: 54e6baf123 ("gpu: nova-core: add initial driver stub")
Closes: https://lore.kernel.org/oe-kbuild-all/202512061721.rxKGnt5q-lkp@intel.com/
Tested-by: Alyssa Ross <hi@alyssa.is>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20251106-b4-select-rust-fw-v3-2-771172257755@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7329417fc9 ]
On a 32-bit ARM system, the audio_decoder struct ends up being too large
for dp_retrain_link_dp_test.
link_dp_cts.c:157:1: error: the frame size of 1328 bytes is larger than
1280 bytes [-Werror=frame-larger-than=]
This is mitigated by shrinking the members of the struct and avoids
having to deal with dynamic allocation.
feed_back_divider is assigned but otherwise unused. Remove both.
pixel_repetition looks like it should be a bool since it's only ever
assigned to 1. But there are checks for 2 and 4. Reduce to uint8_t.
Remove ss_percentage_divider. Unused.
Shrink refresh_rate as it gets assigned to at most a 3 digit integer
value.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3849efdc78)
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 19158c7332 upstream.
clockInfo[] is a generic uchar pointer to variable sized structures
which vary from ASIC to ASIC.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4374
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dc135aa735)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2fc04340cf upstream.
TI's OLDI and DSI encoders need to be set up before the crtc is enabled,
but the DRM helpers will enable the crtc first. This causes various
issues on TI platforms, like visual artifacts or crtc sync lost
warnings.
Thus drm_atomic_helper_commit_modeset_enables() and
drm_atomic_helper_commit_modeset_disables() cannot be used, as they
enable the crtc before bridges' pre-enable, and disable the crtc after
bridges' post-disable.
Open code the drm_atomic_helper_commit_modeset_enables() and
drm_atomic_helper_commit_modeset_disables(), and first call the bridges'
pre-enables, then crtc enable, then bridges' post-enable (and vice versa
for disable).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: stable@vger.kernel.org # v6.17+
Fixes: c9b1150a68 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable")
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Tested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-4-fda68fa1b3de@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ddd3bb4b1 upstream.
Jump to the existing dev_put label when devm_request_irq() fails
so drm_dev_put() and of_reserved_mem_device_release() run
instead of returning early and leaking resources.
Found via static analysis and code review.
Fixes: bed41005e6 ("drm/pl111: Initial drm/kms driver for pl111")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251211123345.2392065-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1c7dc57ff upstream.
Export and namespace those not prefixed with drm_* so
it becomes possible to write custom commit tail functions
in individual drivers using the helper infrastructure.
Tested-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: stable@vger.kernel.org # v6.17+
Fixes: c9b1150a68 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable")
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Tested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-3-fda68fa1b3de@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72d7f45736 upstream.
[Why]
Query for VPE block_type and ip_count is missing.
[How]
Add VPE case in ip_block_type and hw_ip_count query.
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a6ea0a430a)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7074045437 upstream.
After an innocuous optimization change in clang-22, allmodconfig (which
enables CONFIG_KASAN and CONFIG_WERROR) breaks with:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1724:6: error: stack frame size (3144) exceeds limit (3072) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
1724 | void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
With clang-21, this function was already pretty close to the existing
limit of 3072 bytes.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1724:6: error: stack frame size (2904) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
1724 | void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
A similar situation occurred in dml2, which was resolved by
commit e4479aecf6 ("drm/amd/display: Increase sanitizer frame larger
than limit when compile testing with clang") by increasing the limit for
clang when compile testing with certain sanitizer enabled, so that
allmodconfig (an easy testing target) continues to work.
Apply that same change to the dml folder to clear up the warning for
allmodconfig, unbreaking the build.
Closes: https://github.com/ClangBuiltLinux/linux/issues/2135
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 25314b453c)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1ef9a6cab upstream.
This reverts commit c9b1150a68.
Changing the enable/disable sequence has caused regressions on multiple
platforms: R-Car, MCDE, Rockchip. A series (see link below) was sent to
fix these, but it was decided that it's better to revert the original
patch and change the enable/disable sequence only in the tidss driver.
Reverting this commit breaks tidss's DSI and OLDI outputs, which will be
fixed in the following commits.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/all/20251202-mcde-drm-regression-thirdfix-v6-0-f1bffd4ec0fa%40kernel.org/
Fixes: c9b1150a68 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable")
Cc: stable@vger.kernel.org # v6.17+
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Tested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-1-fda68fa1b3de@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8b3627bec upstream.
The changes to always loads fwsec sb causes problems on newer GPUs
which don't use this path.
Add hooks and pass through the device specific layers.
Fixes: da67179e55 ("drm/nouveau/gsp: Allocate fwsec-sb at boot")
Cc: <stable@vger.kernel.org> # v6.16+
Cc: Lyude Paul <lyude@redhat.com>
Cc: Timur Tabi <ttabi@nvidia.com>
Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Tested-by: Christopher Snowhill <chris@kode54.net>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260102041829.2748009-1-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b991ad8dc upstream.
These objects are meant to be used by the GPU firmware or by the PM unit
within the GPU, in which case they may contain physical addresses.
This adds a layer of protection against exposing potentially exploitable
information outside of the driver.
Fixes: ff5f643de0 ("drm/imagination: Add GEM and VM related code")
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251208-no-export-pm-fw-obj-v1-1-83ab12c61693@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 560271e10b upstream.
Since we recently started warning about uses of this function after the
atomic check phase completes, we've started getting warnings about this in
nouveau. It appears a misplaced drm_atomic_get_crtc_state() call has been
hiding in our .prepare_fb callback for a while.
So, fix this by adding a new nv50_head_atom_get_new() function and use that
in our .prepare_fb callback instead.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: 1590700d94 ("drm/nouveau/kms/nv50-: split each resource type into their own source files")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patch.msgid.link/20251211190256.396742-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 754c232384 upstream.
In situations where no system memory is migrated to devmem, and in
upcoming patches where another GPU is performing the migration to
the newly allocated devmem buffer, there is nothing to ensure any
ongoing clear to the devmem allocation or async eviction from the
devmem allocation is complete.
Address that by passing a struct dma_fence down to the copy
functions, and ensure it is waited for before migration is marked
complete.
v3:
- New patch.
v4:
- Update the logic used for determining when to wait for the
pre_migrate_fence.
- Update the logic used for determining when to warn for the
pre_migrate_fence since the scheduler fences apparently
can signal out-of-order.
v5:
- Fix a UAF (CI)
- Remove references to source P2P migration (Himal)
- Put the pre_migrate_fence after migration.
v6:
- Pipeline the pre_migrate_fence dependency (Matt Brost)
Fixes: c5b3eb5a90 ("drm/xe: Add GPUSVM device memory copy vfunc functions")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit 16b5ad3195)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fe2bd1954 upstream.
Initialize the eb.vma array with values of 0 when the eb structure is
first set up. In particular, this sets the eb->vma[i].vma pointers to
NULL, simplifying cleanup and getting rid of the bug described below.
During the execution of eb_lookup_vmas(), the eb->vma array is
successively filled up with struct eb_vma objects. This process includes
calling eb_add_vma(), which might fail; however, even in the event of
failure, eb->vma[i].vma is set for the currently processed buffer.
If eb_add_vma() fails, eb_lookup_vmas() returns with an error, which
prompts a call to eb_release_vmas() to clean up the mess. Since
eb_lookup_vmas() might fail during processing any (possibly not first)
buffer, eb_release_vmas() checks whether a buffer's vma is NULL to know
at what point did the lookup function fail.
In eb_lookup_vmas(), eb->vma[i].vma is set to NULL if either the helper
function eb_lookup_vma() or eb_validate_vma() fails. eb->vma[i+1].vma is
set to NULL in case i915_gem_object_userptr_submit_init() fails; the
current one needs to be cleaned up by eb_release_vmas() at this point,
so the next one is set. If eb_add_vma() fails, neither the current nor
the next vma is set to NULL, which is a source of a NULL deref bug
described in the issue linked in the Closes tag.
When entering eb_lookup_vmas(), the vma pointers are set to the slab
poison value, instead of NULL. This doesn't matter for the actual
lookup, since it gets overwritten anyway, however the eb_release_vmas()
function only recognizes NULL as the stopping value, hence the pointers
are being set to NULL as they go in case of intermediate failure. This
patch changes the approach to filling them all with NULL at the start
instead, rather than handling that manually during failure.
Reported-by: Gangmin Kim <km.kim1503@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15062
Fixes: 544460c338 ("drm/i915: Multi-BB execbuf")
Cc: stable@vger.kernel.org # 5.16.x
Signed-off-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251216180900.54294-2-krzysztof.niemiec@intel.com
(cherry picked from commit 08889b706d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c6915bfea upstream.
Previously this register would become 0 after IFPC took place which
broke all usages of counters.
Fixes: a6a0157cc6 ("drm/msm/a6xx: Enable IFPC on Adreno X1-85")
Cc: stable@vger.kernel.org
Signed-off-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/690960/
Message-ID: <20251127-ifpc_counters-v3-1-fac0a126bc88@gmail.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88733a0b64 upstream.
It is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in a
single place the check is missing.
Also use convenient locals instead of phys_enc->* where available.
Cc: stable@vger.kernel.org
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/693860/
Link: https://lore.kernel.org/r/20251211093630.171014-1-kniv@yandex-team.ru
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe3ccd2413 upstream.
When imported dma-bufs are destroyed, TTM is not fully
individualizing the dma-resv, but it *is* copying the fences that
need to be waited for before declaring idle. So in the case where
the bo->resv != bo->_resv we can still drop the preempt-fences, but
make sure we do that on bo->_resv which contains the fence-pointer
copy.
In the case where the copying fails, bo->_resv will typically not
contain any fences pointers at all, so there will be nothing to
drop. In that case, TTM would have ensured all fences that would
have been copied are signaled, including any remaining preempt
fences.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: fa0af721bd ("drm/ttm: test private resv obj on release/destroy")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251217093441.5073-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 425fe550fb)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80f9c601d9 upstream.
msleep is not very accurate in terms of how long it actually sleeps,
whereas usleep_range is precise. Replace the timeslice sleep for
long-running workloads with the more accurate usleep_range to avoid
jitter if the sleep period is less than 20ms.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-3-matthew.brost@intel.com
(cherry picked from commit ca415c4d4c)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f0f404bd2 upstream.
A 10ms timeslice for long-running workloads is far too long and causes
significant jitter in benchmarks when the system is shared. Adjust the
value to 5ms for preempt-fencing VMs, as the resume step there is quite
costly as memory is moved around, and set it to zero for pagefault VMs,
since switching back to pagefault mode after dma-fence mode is
relatively fast.
Also change min_run_period_ms to 'unsiged int' type rather than 's64' as
only positive values make sense.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-2-matthew.brost@intel.com
(cherry picked from commit 33a5abd9a6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 449bcd5d45 upstream.
Some Xe bos are allocated with extra backing-store for the CCS
metadata. It's never been the intention to share the CCS metadata
when exporting such bos as dma-buf. Don't include it in the
dma-buf sg-table.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251209204920.224374-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit a4ebfb9d95)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
