commit 3d778e65b4 upstream.
For these two firmware mailbox commands, in txgbe_test_hostif() and
txgbe_set_phy_link_hostif(), there is no need to read data from the
buffer.
Under the current setting, OEM firmware will cause the driver to fail to
probe. Because OEM firmware returns more link information, with a larger
OEM structure txgbe_hic_ephy_getlink. However, the current driver does
not support the OEM function. So just fix it in the way that does not
involve reading the returned data.
Fixes: d84a3ff9aa ("net: txgbe: Restrict the use of mismatched FW versions")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/2914AB0BC6158DDA+20260119065935.6015-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca1bb3fedf upstream.
The MAX_FL (maximum frame length) and related calculations used ETH_HLEN,
which does not account for the 4-byte VLAN tag in tagged frames. This
caused the hardware to reject valid VLAN frames as oversized, resulting
in RX errors and dropped packets.
Use VLAN_ETH_HLEN instead of ETH_HLEN in the MAX_FL register setup,
cut-through mode threshold, buffer allocation, and max_mtu calculation.
Cc: stable@kernel.org # v6.18+
Fixes: 62b5bb7be7 ("net: fec: update MAX_FL based on the current MTU")
Fixes: d466c16026 ("net: fec: enable the Jumbo frame support for i.MX8QM")
Fixes: 59e9bf037d ("net: fec: add change_mtu to support dynamic buffer allocation")
Fixes: ec2a1681ed ("net: fec: use a member variable for maximum buffer size")
Signed-off-by: Clemens Gruber <mail@clemensgruber.at>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260121083751.66997-1-mail@clemensgruber.at
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d998b0e5af upstream.
0 is a valid DMA address [1] so using it as the error value can lead to
errors. The error value of dma_map_XXX() functions is DMA_MAPPING_ERROR
which is ~0. The callers of otx2_dma_map_page() use dma_mapping_error()
to test the return value of otx2_dma_map_page(). This means that they
would not detect an error in otx2_dma_map_page().
Make otx2_dma_map_page() return the raw value of dma_map_page_attrs().
[1] https://lore.kernel.org/all/f977f68b-cec5-4ab7-b4bd-2cf6aca46267@intel.com
Fixes: caa2da34fd ("octeontx2-pf: Initialize and config queues")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260114123107.42387-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fb2bb2a1eb ]
Incorrectly transmitted interrupt number instead of queue number
when using netif_queue_set_napi. Besides, move this to appropriate
code location to set napi.
Remove redundant netif_stop_subqueue beacuase it is not part of the
hinic3_send_one_skb process.
Fixes: 17fcb3dc12 ("hinic3: module initialization and tx/rx logic")
Co-developed-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Fan Gong <gongfan1@huawei.com>
Link: https://patch.msgid.link/7b8e4eb5c53cbd873ee9aaefeb3d9dbbaff52deb.1769070766.git.zhuyikai1@h-partners.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbb11b8d75 ]
We need to apply the tx_chan_offset to the netfilter cfg channel or the
output channel will be incorrect for asp-3.0 and newer.
Fixes: e9f31435ee ("net: bcmasp: Add support for asp-v3.0")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260120192339.2031648-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8215794403 ]
When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is
set to false, the driver may request the PMAC_ID from the firmware of the
network card, and this function will store that PMAC_ID at the provided
address pmac_id. This is the contract of this function.
However, there is a location within the driver where both
pmac_id_valid == false and pmac_id == NULL are being passed. This could
result in dereferencing a NULL pointer.
To resolve this issue, it is necessary to pass the address of a stub
variable to the function.
Fixes: 95046b927a ("be2net: refactor MAC-addr setup code")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20260120113734.20193-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdf8de9c6b ]
In recent testing, verification of XDP_REDIRECT and zero-copy features
failed because the driver is not setting the corresponding feature flags.
Fixes: efabce2901 ("octeontx2-pf: AF_XDP zero copy receive support")
Fixes: 66c0e13ad2 ("drivers: net: turn on XDP features")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20260119100222.2267925-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d57c67c956 ]
HCLGE_FD_AD_COUNTER_NUM_M should be at GENMASK(19, 13),
rather than at GENMASK(20, 13), because bit 20 is
HCLGE_FD_AD_NXT_STEP_B.
This patch corrects the wrong definition.
Fixes: 1173286802 ("net: hns3: Add input key and action config support for flow director")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260119132840.410513-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 302e5b481c ]
In be_get_new_eqd(), statistics of pkts, protected by u64_stats_sync, are
read and accumulated in ignorance of possible u64_stats_fetch_retry()
events. Before the commit in question, these statistics were retrieved
one by one directly from queues. Fix this by reading them into temporary
variables first.
Fixes: 2094777041 ("be2net: set interrupt moderation for Skyhawk-R using EQ-DB")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260119153440.1440578-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fbe395cd1 ]
In idpf_net_dim(), some statistics protected by u64_stats_sync, are read
and accumulated in ignorance of possible u64_stats_fetch_retry() events.
The correct way to copy statistics is already illustrated by
idpf_add_queue_stats(). Fix this by reading them into temporary variables
first.
Fixes: c2d548cad1 ("idpf: add TX splitq napi poll support")
Fixes: 3a8845af66 ("idpf: add RX splitq napi poll support")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260119162720.1463859-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 748a81c8ce ]
In hns3_fetch_stats(), ring statistics, protected by u64_stats_sync, are
read and accumulated in ignorance of possible u64_stats_fetch_retry()
events. These statistics are already accumulated by
hns3_ring_stats_update(). Fix this by reading them into a temporary
buffer first.
Fixes: b20d7fe51e ("net: hns3: add some statitics info to tx process")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260119160759.1455950-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdfc7b55ad ]
PCIe reads need to be done inside the time sandwich because PCIe
writes may get buffered in the PCIe fabric and posted to the device
after the _postts completes. Doing the PCIe read inside the time
sandwich guarantees that the write gets flushed before the _postts
timestamp is taken.
Cc: lrizzo@google.com
Cc: namangulati@google.com
Cc: willemb@google.com
Cc: intel-wired-lan@lists.osuosl.org
Cc: milena.olech@intel.com
Cc: jacob.e.keller@intel.com
Fixes: 5cb8805d23 ("idpf: negotiate PTP capabilities and get PTP clock")
Suggested-by: Shachar Raindel <shacharr@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3f867e7a0 ]
Commit 4da71a77fc ("ice: read internal temperature sensor") introduced
internal temperature sensor reading via HWMON. ice_hwmon_init() was added
to ice_init_feature() and ice_hwmon_exit() was added to ice_remove(). As a
result if devlink reload is used to reinit the device and then the driver
is removed, a call trace can occur.
BUG: unable to handle page fault for address: ffffffffc0fd4b5d
Call Trace:
string+0x48/0xe0
vsnprintf+0x1f9/0x650
sprintf+0x62/0x80
name_show+0x1f/0x30
dev_attr_show+0x19/0x60
The call trace repeats approximately every 10 minutes when system
monitoring tools (e.g., sadc) attempt to read the orphaned hwmon sysfs
attributes that reference freed module memory.
The sequence is:
1. Driver load, ice_hwmon_init() gets called from ice_init_feature()
2. Devlink reload down, flow does not call ice_remove()
3. Devlink reload up, ice_hwmon_init() gets called from
ice_init_feature() resulting in a second instance
4. Driver unload, ice_hwmon_exit() called from ice_remove() leaving the
first hwmon instance orphaned with dangling pointer
Fix this by moving ice_hwmon_exit() from ice_remove() to
ice_deinit_features() to ensure proper cleanup symmetry with
ice_hwmon_init().
Fixes: 4da71a77fc ("ice: read internal temperature sensor")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42fb5f3deb ]
devlink-reload results in ice_init_hw failed error, and then removing
the ice driver causes a NULL pointer dereference.
[ +0.102213] ice 0000:ca:00.0: ice_init_hw failed: -16
...
[ +0.000001] Call Trace:
[ +0.000003] <TASK>
[ +0.000006] ice_unload+0x8f/0x100 [ice]
[ +0.000081] ice_remove+0xba/0x300 [ice]
Commit 1390b8b3d2 ("ice: remove duplicate call to ice_deinit_hw() on
error paths") removed ice_deinit_hw() from ice_deinit_dev(). As a result
ice_devlink_reinit_down() no longer calls ice_deinit_hw(), but
ice_devlink_reinit_up() still calls ice_init_hw(). Since the control
queues are not uninitialized, ice_init_hw() fails with -EBUSY.
Add ice_deinit_hw() to ice_devlink_reinit_down() to correspond with
ice_init_hw() in ice_devlink_reinit_up().
Fixes: 1390b8b3d2 ("ice: remove duplicate call to ice_deinit_hw() on error paths")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f406220eb8 ]
Several ioctl functions have the ability to call ice_get_rxfh, however
all of these ioctl functions do not provide all of the expected
information in ethtool_rxfh_param. For example, ethtool_get_rxfh_indir does
not provide an rss_key. This previously caused ethtool_get_rxfh_indir to
always fail with -EINVAL.
This change draws inspiration from i40e_get_rss to handle this
situation, by only calling the appropriate rss helpers when the
necessary information has been provided via ethtool_rxfh_param.
Fixes: b66a972abb ("ice: Refactor ice_set/get_rss into LUT and key specific functions")
Signed-off-by: Cody Haas <chaas@riotgames.com>
Closes: https://lore.kernel.org/intel-wired-lan/CAH7f-UKkJV8MLY7zCdgCrGE55whRhbGAXvgkDnwgiZ9gUZT7_w@mail.gmail.com/
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab9b218a15 ]
The RX flowid programming initializes the TCAM mask to all ones, but
then overwrites it when clearing the MAC DA mask bits. This results
in losing the intended initialization and may affect other match fields.
Update the code to clear the MAC DA bits using an AND operation, making
the handling of mask[0] consistent with mask[1], where the field-specific
bits are cleared after initializing the mask to ~0ULL.
Fixes: 57d00d4364 ("octeontx2-pf: mcs: Match macsec ethertype along with DMAC")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20260116164724.2733511-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c158f985cf ]
On the receive path, packet can be damaged because of buffer
overflow in Rx FIFO. Avoid misleading per-packet error log when
packet->errors is set, this can flood the log. Instead, rely on the
standard rtnl_link_stats64 stats.
Fixes: c5aa9e3b81 ("amd-xgbe: Initial AMD 10GbE platform driver")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260114163037.2062606-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a74c7a58ca ]
In ucc_geth's .mac_config(), we configure the TBI Serdes block represented by a
struct phy_device that we get from firmware.
While porting to phylink, a check was missed to make sure we don't try
to access the TBI PHY if we can't get it. Let's add it and return early
in case of error
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202601130843.rFGNXA5a-lkp@intel.com/
Fixes: 53036aa8d0 ("net: freescale: ucc_geth: phylink conversion")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260114080247.366252-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ad1b6c1e6 ]
The previous 7 KB per queue caused TX unit hangs under heavy
timestamping load. Reducing to 5 KB avoids these hangs and matches
the TSN recommendation in I225/I226 SW User Manual Section 7.5.4.
The 8 KB "freed" by this change is currently unused. This reduction
is not expected to impact throughput, as the i226 is PCIe-limited
for small TSN packets rather than TX-buffer-limited.
Fixes: 0d58cdc902 ("igc: optimize TX packet buffer utilization for TSN mode")
Reported-by: Zdenek Bouska <zdenek.bouska@siemens.com>
Closes: https://lore.kernel.org/netdev/AS1PR10MB5675DBFE7CE5F2A9336ABFA4EBEAA@AS1PR10MB5675.EURPRD10.PROD.OUTLOOK.COM/
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6990dc392a ]
The current HW bug workaround checks the TXTT_0 ready bit first,
then reads TXSTMPL_0 twice (before and after reading TXSTMPH_0)
to detect whether a new timestamp was captured by timestamp
register 0 during the workaround.
This sequence has a race: if a new timestamp is captured after
checking the TXTT_0 bit but before the first TXSTMPL_0 read, the
detection fails because both the "old" and "new" values come from
the same timestamp.
Fix by reading TXSTMPL_0 first to establish a baseline, then
checking the TXTT_0 bit. This ensures any timestamp captured
during the race window will be detected.
Old sequence:
1. Check TXTT_0 ready bit
2. Read TXSTMPL_0 (baseline)
3. Read TXSTMPH_0 (interrupt workaround)
4. Read TXSTMPL_0 (detect changes vs baseline)
New sequence:
1. Read TXSTMPL_0 (baseline)
2. Check TXTT_0 ready bit
3. Read TXSTMPH_0 (interrupt workaround)
4. Read TXSTMPL_0 (detect changes vs baseline)
Fixes: c789ad7cbe ("igc: Work around HW bug causing missing timestamps")
Suggested-by: Avi Shalev <avi.shalev@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41a9a6826f ]
The Multi-queue Priority (MQPRIO) and Earliest TxTime First (ETF) offloads
utilize the Time Sensitive Networking (TSN) Tx mode. This mode is always
coupled to IEEE 802.1Qbv time aware shaper (Qbv). Therefore, the driver
sets a default Qbv schedule of all gates opened and a cycle time of
1s. This schedule is set during probe.
However, the following sequence of events lead to Tx issues:
- Boot a dual core system
igc_probe():
igc_tsn_clear_schedule():
-> Default Schedule is set
Note: At this point the driver has allocated two Tx/Rx queues, because
there are only two CPUs.
- ethtool -L enp3s0 combined 4
igc_ethtool_set_channels():
igc_reinit_queues()
-> Default schedule is gone, per Tx ring start and end time are zero
- tc qdisc replace dev enp3s0 handle 100 parent root mqprio \
num_tc 4 map 3 3 2 2 0 1 1 1 3 3 3 3 3 3 3 3 \
queues 1@0 1@1 1@2 1@3 hw 1
igc_tsn_offload_apply():
igc_tsn_enable_offload():
-> Writes zeros to IGC_STQT(i) and IGC_ENDQT(i), causing Tx to stall/fail
Therefore, restore the default Qbv schedule after changing the number of
channels.
Furthermore, add a restriction to not allow queue reconfiguration when
TSN/Qbv is enabled, because it may lead to inconsistent states.
Fixes: c814a2d2d4 ("igc: Use default cycle 'start' and 'end' values for queues")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01139a2ce5 ]
The commit 5f6df173f9 ("ice: implement and use rd32_poll_timeout for
ice_sq_done timeout") converted ICE_CTL_Q_SQ_CMD_TIMEOUT from jiffies
to microseconds.
But the ice_release_res() function was missed, and its logic still
treats ICE_CTL_Q_SQ_CMD_TIMEOUT as a jiffies value.
So correct the issue by usecs_to_jiffies().
Found by inspection of the DDP downloading process.
Compile and modprobe tested only.
Fixes: 5f6df173f9 ("ice: implement and use rd32_poll_timeout for ice_sq_done timeout")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9d45c22ed ]
When the user issues an administrative down to an interface that is the
primary for an aggregate bond, the prune lists are being purged. This
breaks communication to the secondary interface, which shares a prune
list on the main switch block while bonded together.
For the primary interface of an aggregate, avoid deleting these prune
lists during stop, and since they are hardcoded to specific values for
the default vlan and QinQ vlans, the attempt to re-add them during the
up phase will quietly fail without any additional problem.
Fixes: 1e0f9881ef ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8439016c3b ]
The u64_stats_sync structure is empty on 64-bit systems. However, on 32-bit
systems it contains a seqcount_t which needs to be initialized. While the
memory is zero-initialized, a lack of u64_stats_init means that lockdep
won't get initialized properly. Fix this by adding u64_stats_init() calls
to the rings just after allocation.
Fixes: 2b245cb294 ("ice: Implement transmit and NAPI support")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f93fc5d12d ]
octep_vf_request_irqs() requests MSI-X queue IRQs with dev_id set to
ioq_vector. If request_irq() fails part-way, the rollback loop calls
free_irq() with dev_id set to 'oct', which does not match the original
dev_id and may leave the irqaction registered.
This can keep IRQ handlers alive while ioq_vector is later freed during
unwind/teardown, leading to a use-after-free or crash when an interrupt
fires.
Fix the error path to free IRQs with the same ioq_vector dev_id used
during request_irq().
Fixes: 1cd3b40797 ("octeon_ep_vf: add Tx/Rx processing and interrupt support")
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Link: https://patch.msgid.link/20260108164256.1749-2-qikeyu2017@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5629f8859d ]
Profile rollback can fail in mlx5e_netdev_change_profile() and we will
end up with invalid mlx5e_priv memset to 0, we must maintain the
'destroying' bit in order to gracefully shutdown even if the
profile/priv are not valid.
This patch maintains the previous state of the 'destroying' state of
mlx5e_priv after priv cleanup, to allow the remove flow to cleanup
common resources from mlx5_core to avoid FW fatal errors as seen below:
$ devlink dev eswitch set pci/0000:00:03.0 mode switchdev
Error: mlx5_core: Failed setting eswitch to offloads.
dmesg: mlx5_core 0000:00:03.0 enp0s3np0: failed to rollback to orig profile, ...
$ devlink dev reload pci/0000:00:03.0
mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:00:03.0: poll_health:803:(pid 519): Fatal error 3 detected
mlx5_core 0000:00:03.0: firmware version: 28.41.1000
mlx5_core 0000:00:03.0: 0.000 Gb/s available PCIe bandwidth (Unknown x255 link)
mlx5_core 0000:00:03.0: mlx5_function_enable:1200:(pid 519): enable hca failed
mlx5_core 0000:00:03.0: mlx5_function_enable:1200:(pid 519): enable hca failed
mlx5_core 0000:00:03.0: mlx5_health_try_recover:340:(pid 141): handling bad device here
mlx5_core 0000:00:03.0: mlx5_handle_bad_state:285:(pid 141): Expected to see disabled NIC but it is full driver
mlx5_core 0000:00:03.0: mlx5_error_sw_reset:236:(pid 141): start
mlx5_core 0000:00:03.0: NIC IFC still 0 after 4000ms.
Fixes: c4d7eb5768 ("net/mxl5e: Add change profile method")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260108212657.25090-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b5bdabb54 ]
The max buffer size of ENETC RX BD is 0xFFFF bytes, so if the PAGE_SIZE
is greater than 128K, ENETC_RXB_DMA_SIZE and ENETC_RXB_DMA_SIZE_XDP will
be greater than 0xFFFF, thus causing a build warning.
This will not cause any practical issues because ENETC is currently only
used on the ARM64 platform, and the max PAGE_SIZE is 64K. So this patch
is only for fixing the build warning that occurs when compiling ENETC
drivers for other platforms.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601050637.kHEKKOG7-lkp@intel.com/
Fixes: e59bc32df2 ("net: enetc: correct the value of ENETC_RXB_TRUESIZE")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260107091204.1980222-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6abcf751bc ]
airoha_ppe_deinit() runs airoha_npu_ppe_deinit() in atomic context.
airoha_npu_ppe_deinit routine allocates ppe_data buffer with GFP_KERNEL
flag. Rely on rcu_replace_pointer in airoha_ppe_deinit routine in order
to fix schedule while atomic issue in airoha_npu_ppe_deinit() since we
do not need atomic context there.
Fixes: 00a7678310 ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260105-airoha-fw-ethtool-v2-1-3b32b158cc31@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4648fb2f2e ]
If vport flags do not contain VIRTCHNL2_VPORT_ENABLE_RDMA, driver does not
allocate vdev_info for this vport. This leads to kernel NULL pointer
dereference in idpf_idc_vport_dev_down(), which references vdev_info for
every vport regardless.
Check, if vdev_info was ever allocated before unplugging aux device.
Fixes: be91128c57 ("idpf: implement RDMA vport auxiliary dev create, init, and destroy")
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 086efe0a1e ]
The HW only supports a maximum Rx buffer size of 16K-128. On systems
using large pages, the libeth logic can configure the buffer size to be
larger than this. The upper bound is PAGE_SIZE while the lower bound is
MTU rounded up to the nearest power of 2. For example, ARM systems with
a 64K page size and an mtu of 9000 will set the Rx buffer size to 16K,
which will cause the config Rx queues message to fail.
Initialize the bufq/fill queue buf_len field to the maximum supported
size. This will trigger the libeth logic to cap the maximum Rx buffer
size by reducing the upper bound.
Fixes: 74d1412ac8 ("idpf: use libeth Rx buffer management for payload buffer")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: David Decotigny <ddecotig@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87b8ee6468 ]
Fix error handling to properly cleanup interrupts when
idpf_vport_queue_ids_init() or idpf_rx_bufs_init_all() fail. Jump to
'intr_deinit' instead of 'queues_rel' to ensure interrupts are cleaned up
before releasing other resources.
Fixes: d4d5587182 ("idpf: initialize interrupts and enable vport")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebecca5b09 ]
During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20
** display the RSS LUT
ethtool -x eth1
[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793] <TASK>
[82375.558804] rss_prepare.isra.0+0x187/0x2a0
[82375.558827] rss_prepare_data+0x3a/0x50
[82375.558845] ethnl_default_doit+0x13d/0x3e0
[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886] genl_rcv_msg+0x1ad/0x2b0
[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937] netlink_rcv_skb+0x58/0x100
[82375.558957] genl_rcv+0x2c/0x50
[82375.558971] netlink_unicast+0x289/0x3e0
[82375.558988] netlink_sendmsg+0x215/0x440
[82375.559005] __sys_sendto+0x234/0x240
[82375.559555] __x64_sys_sendto+0x28/0x30
[82375.560068] x64_sys_call+0x1909/0x1da0
[82375.560576] do_syscall_64+0x7a/0xfa0
[82375.561076] ? clear_bhb_loop+0x60/0xb0
[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip>
Fixes: 02cbfba1ad ("idpf: add ethtool callbacks")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 445b49d137 ]
RSS LUT provisioning and queries on a down interface currently return
silently without effect. Users should be able to configure RSS settings
even when the interface is down.
Fix by maintaining RSS configuration changes in the driver's soft copy and
deferring HW programming until the interface comes up.
Fixes: 02cbfba1ad ("idpf: add ethtool callbacks")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83f38f210b ]
The RSS LUT is not initialized until the interface comes up, causing
the following NULL pointer crash when ethtool operations like rxhash on/off
are performed before the interface is brought up for the first time.
Move RSS LUT initialization from ndo_open to vport creation to ensure LUT
is always available. This enables RSS configuration via ethtool before
bringing the interface up. Simplify LUT management by maintaining all
changes in the driver's soft copy and programming zeros to the indirection
table when rxhash is disabled. Defer HW programming until the interface
comes up if it is down during rxhash and LUT configuration changes.
Steps to reproduce:
** Load idpf driver; interfaces will be created
modprobe idpf
** Before bringing the interfaces up, turn rxhash off
ethtool -K eth2 rxhash off
[89408.371875] BUG: kernel NULL pointer dereference, address: 0000000000000000
[89408.371908] #PF: supervisor read access in kernel mode
[89408.371924] #PF: error_code(0x0000) - not-present page
[89408.371940] PGD 0 P4D 0
[89408.371953] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[89408.372052] RIP: 0010:memcpy_orig+0x16/0x130
[89408.372310] Call Trace:
[89408.372317] <TASK>
[89408.372326] ? idpf_set_features+0xfc/0x180 [idpf]
[89408.372363] __netdev_update_features+0x295/0xde0
[89408.372384] ethnl_set_features+0x15e/0x460
[89408.372406] genl_family_rcv_msg_doit+0x11f/0x180
[89408.372429] genl_rcv_msg+0x1ad/0x2b0
[89408.372446] ? __pfx_ethnl_set_features+0x10/0x10
[89408.372465] ? __pfx_genl_rcv_msg+0x10/0x10
[89408.372482] netlink_rcv_skb+0x58/0x100
[89408.372502] genl_rcv+0x2c/0x50
[89408.372516] netlink_unicast+0x289/0x3e0
[89408.372533] netlink_sendmsg+0x215/0x440
[89408.372551] __sys_sendto+0x234/0x240
[89408.372571] __x64_sys_sendto+0x28/0x30
[89408.372585] x64_sys_call+0x1909/0x1da0
[89408.372604] do_syscall_64+0x7a/0xfa0
[89408.373140] ? clear_bhb_loop+0x60/0xb0
[89408.373647] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[89408.378887] </TASK>
<snip>
Fixes: a251eee621 ("idpf: add SRIOV support and other ndo_ops")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36aae2ea6b ]
When ethtool -n is executed on an interface to display the flow steering
rules, "rxclass: Unknown flow type" error is generated.
The flow steering list maintained in the driver currently stores only the
location and q_index but other fields of the ethtool_rx_flow_spec are not
stored. This may be enough for the virtchnl command to delete the entry.
However, when the ethtool -n command is used to query the flow steering
rules, the ethtool_rx_flow_spec returned is not complete causing the
error below.
Resolve this by storing the flow spec (fsp) when rules are added and
returning the complete flow spec when rules are queried.
Also, change the return value from EINVAL to ENOENT when flow steering
entry is not found during query by location or when deleting an entry.
Add logic to detect and reject duplicate filter entries at the same
location and change logic to perform upfront validation of all error
conditions before adding flow rules through virtchnl. This avoids the
need for additional virtchnl delete messages when subsequent operations
fail, which was missing in the original upstream code.
Example:
Before the fix:
ethtool -n eth1
2 RX rings available
Total 2 rules
rxclass: Unknown flow type
rxclass: Unknown flow type
After the fix:
ethtool -n eth1
2 RX rings available
Total 2 rules
Filter: 0
Rule Type: TCP over IPv4
Src IP addr: 10.0.0.1 mask: 0.0.0.0
Dest IP addr: 0.0.0.0 mask: 255.255.255.255
TOS: 0x0 mask: 0xff
Src port: 0 mask: 0xffff
Dest port: 0 mask: 0xffff
Action: Direct to queue 0
Filter: 1
Rule Type: UDP over IPv4
Src IP addr: 10.0.0.1 mask: 0.0.0.0
Dest IP addr: 0.0.0.0 mask: 255.255.255.255
TOS: 0x0 mask: 0xff
Src port: 0 mask: 0xffff
Dest port: 0 mask: 0xffff
Action: Direct to queue 0
Fixes: ada3e24b84 ("idpf: add flow steering support")
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Co-developed-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9841bd28b ]
The flow steering list maintains entries that are added and removed as
ethtool creates and deletes flow steering rules. Module removal with active
entries causes memory leak as the list is not properly cleaned up.
Prevent this by iterating through the remaining entries in the list and
freeing the associated memory during module removal. Add a spinlock
(flow_steer_list_lock) to protect the list access from multiple threads.
Fixes: ada3e24b84 ("idpf: add flow steering support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d792219fe ]
If the init_task fails during a driver load, we end up without vports and
netdevs, effectively failing the entire process. In that state a
subsequent reset will result in a crash as the service task attempts to
access uninitialized resources. Following trace is from an error in the
init_task where the CREATE_VPORT (op 501) is rejected by the FW:
[40922.763136] idpf 0000:83:00.0: Device HW Reset initiated
[40924.449797] idpf 0000:83:00.0: Transaction failed (op 501)
[40958.148190] idpf 0000:83:00.0: HW reset detected
[40958.161202] BUG: kernel NULL pointer dereference, address: 00000000000000a8
...
[40958.168094] Workqueue: idpf-0000:83:00.0-vc_event idpf_vc_event_task [idpf]
[40958.168865] RIP: 0010:idpf_vc_event_task+0x9b/0x350 [idpf]
...
[40958.177932] Call Trace:
[40958.178491] <TASK>
[40958.179040] process_one_work+0x226/0x6d0
[40958.179609] worker_thread+0x19e/0x340
[40958.180158] ? __pfx_worker_thread+0x10/0x10
[40958.180702] kthread+0x10f/0x250
[40958.181238] ? __pfx_kthread+0x10/0x10
[40958.181774] ret_from_fork+0x251/0x2b0
[40958.182307] ? __pfx_kthread+0x10/0x10
[40958.182834] ret_from_fork_asm+0x1a/0x30
[40958.183370] </TASK>
Fix the error handling in the init_task to make sure the service and
mailbox tasks are disabled if the error happens during load. These are
started in idpf_vc_core_init(), which spawns the init_task and has no way
of knowing if it failed. If the error happens on reset, following
successful driver load, the tasks can still run, as that will allow the
netdevs to attempt recovery through another reset. Stop the PTP callbacks
either way as those will be restarted by the call to idpf_vc_core_init()
during a successful reset.
Fixes: 0fe45467a1 ("idpf: add create vport and netdev configuration")
Reported-by: Vivek Kumar <iamvivekkumar@google.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e281e1155 ]
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff
Fixes: 0fe45467a1 ("idpf: add create vport and netdev configuration")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dd72ebc73 ]
Convert vport state to a bitmap and remove the DOWN state which is
redundant in the existing logic. There are no functional changes aside
from the use of bitwise operations when setting and checking the states.
Removed the double underscore to be consistent with the naming of other
bitmaps in the header and renamed current_state to vport_is_up to match
the meaning of the new variable.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Chittim Madhu <madhu.chittim@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 2e281e1155 ("idpf: detach and close netdevs while handling a reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 083029bd8b ]
During a successful reset the driver would re-allocate vport resources
while keeping the netdevs intact. However, in case of an error in the
init task, the netdev of the failing vport will be unregistered,
effectively removing the network interface:
[ 121.211076] idpf 0000:83:00.0: enabling device (0100 -> 0102)
[ 121.221976] idpf 0000:83:00.0: Device HW Reset initiated
[ 124.161229] idpf 0000:83:00.0 ens801f0: renamed from eth0
[ 124.163364] idpf 0000:83:00.0 ens801f0d1: renamed from eth1
[ 125.934656] idpf 0000:83:00.0 ens801f0d2: renamed from eth2
[ 128.218429] idpf 0000:83:00.0 ens801f0d3: renamed from eth3
ip -br a
ens801f0 UP
ens801f0d1 UP
ens801f0d2 UP
ens801f0d3 UP
echo 1 > /sys/class/net/ens801f0/device/reset
[ 145.885537] idpf 0000:83:00.0: resetting
[ 145.990280] idpf 0000:83:00.0: reset done
[ 146.284766] idpf 0000:83:00.0: HW reset detected
[ 146.296610] idpf 0000:83:00.0: Device HW Reset initiated
[ 211.556719] idpf 0000:83:00.0: Transaction timed-out (op:526 cookie:7700 vc_op:526 salt:77 timeout:60000ms)
[ 272.996705] idpf 0000:83:00.0: Transaction timed-out (op:502 cookie:7800 vc_op:502 salt:78 timeout:60000ms)
ip -br a
ens801f0d1 DOWN
ens801f0d2 DOWN
ens801f0d3 DOWN
Re-shuffle the logic in the error path of the init task to make sure the
netdevs remain intact. This will allow the driver to attempt recovery via
subsequent resets, provided the FW is still functional.
The main change is to make sure that idpf_decfg_netdev() is not called
should the init task fail during a reset. The error handling is
consolidated under unwind_vports, as the removed labels had the same
cleanup logic split depending on the point of failure.
Fixes: ce1b75d063 ("idpf: add ptypes and MAC filter support")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffeafa65b2 ]
Fix the max number of bits passed to find_first_zero_bit() in
bnxt_alloc_agg_idx(). We were incorrectly passing the number of
long words. find_first_zero_bit() may fail to find a zero bit and
cause a wrong ID to be used. If the wrong ID is already in use, this
can cause data corruption. Sometimes an error like this can also be
seen:
bnxt_en 0000:83:00.0 enp131s0np0: TPA end agg_buf 2 != expected agg_bufs 1
Fix it by passing the correct number of bits MAX_TPA_P5. Use
DECLARE_BITMAP() to more cleanly define the bitmap. Add a sanity
check to warn if a bit cannot be found and reset the ring [MChan].
Fixes: ec4d8e7cf0 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.")
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Srijit Bose <srijit.bose@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251231083625.3911652-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
