- Fix register naming in the Mediatek mt8189 driver.
- Select REGMAP_MMIO for the Realtek RTD driver.
- Fix the number of items in groups in the Toshiba
Visconti driver.
- Fix a memory leak in the Cirrus CS42L43 driver.
- Fix a deadlock (!) in Qualcomm pinmux configuration.
- Fix use of uninitialized memory and list initialization
in the S32CC pin controller.
-----BEGIN PGP SIGNATURE-----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=dfY2
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix register naming in the Mediatek mt8189 driver
- Select REGMAP_MMIO for the Realtek RTD driver
- Fix the number of items in groups in the Toshiba Visconti driver
- Fix a memory leak in the Cirrus CS42L43 driver
- Fix a deadlock (!) in Qualcomm pinmux configuration
- Fix use of uninitialized memory and list initialization in the S32CC
pin controller
* tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: xlnx,versal-pinctrl: Add missing unevaluatedProperties on '^conf' nodes
pinctrl: s32cc: initialize gpio_pin_config::list after kmalloc()
pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc
pinctrl: qcom: msm: Fix deadlock in pinmux configuration
pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()
dt-bindings: pinctrl: toshiba,visconti: Fix number of items in groups
pinctrl: realtek: Select REGMAP_MMIO for RTD driver
pinctrl: mediatek: mt8189: align register base names to dt-bindings ones
pinctrl: mediatek: mt8196: align register base names to dt-bindings ones
Add the missing unevaluatedProperties to disallow extra properties on
the '^conf' nodes.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The $id for a binding should match its file path. The ti,twl4030-gpio
binding is located in the gpio/ subdirectory but was missing this from
its $id.
Correct the path to follow the standard convention.
Fixes: 842dcff8e2 ("dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Fixes: 842dcff8e2 ("dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema")
Link: https://lore.kernel.org/r/20250821194710.16043-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
A collection of small fixes. It became slightly bigger than usual
due to timing issues (holidays, etc), but all changes are rather
device-specific fixes, so not really worrisome.
- ASoC Cirrus codec fixes for AMD
- Various fixes for ASoC Intel AVS, Qualcomm, SoundWire, FSL,
Mediatek, Renesas,
- A few HD-audio quirks, and USB-audio regression fixes for Presonus
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmkEpNIOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE9xthAAlkduq4Oy1dCaLAiC1befqx3U9DX0d8egvydt
2WNy71CtcitRoYoJJDcSRlvDhYnBgrp6weeNR8I8n1j39/KhQvYUTeKAHUJe2SM+
xHHKob25+rrAWFHFpYLc7Zi7XWTIASui7K/cdrUsE5wr7LXHl8aOfAvdExr9V0/s
tDcnrd9q1olbfoMajMNEdm/fMdIHcCoJn68Br9axJ9K03hQE6HQ9EGHyw78WbU9K
9BUJA6reBb5so75hOkjr7hvg31hQUk9ADrnV5/yo0toS02+faIjLv+2L6HBEb4pC
HVJP50ZAA2u9ffZPRx8S0dK/wtjPIaMPz5IEOnqdHFkGN79rtg9BG+3pwZguXxNC
rTfLYQrD3sAGbU4bXIZ/8VkZvDMpGarFcayMftj0cr5Ag4zYx3heIpqdn1nxth/i
e+9GeDx5RNn2AuYEmOXwOt+iL6o8WB0aPEftsILPL/umHi8igLm0oFnaKap8pG7T
thjp45AH7PKufCv0JZ35V0rQmbLmh5NNxjaiEmxTeMmdFBd/04gk8jbhsQjIpeQU
xStpZUDUHYQnjEezG5GIlsHou/9usW7dlXRfT5x+On6EMCvhEU5NVRpt8WnMaSS9
G9wI/q6kfz8qKpfwy33bfnqOEjbnMdwp2J9hrVYDsXGpEt4ViBtoYFkD4/CkscKM
/4uQaf4=
=8X1t
-----END PGP SIGNATURE-----
Merge tag 'sound-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. It became slightly bigger than usual due
to timing issues (holidays, etc), but all changes are rather
device-specific fixes, so not really worrisome.
- ASoC Cirrus codec fixes for AMD
- Various fixes for ASoC Intel AVS, Qualcomm, SoundWire, FSL,
Mediatek, Renesas
- A few HD-audio quirks, and USB-audio regression fixes for Presonus"
* tag 'sound-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda/realtek: Enable mic on Vaio RPL
ASoC: dt-bindings: pm4125-sdw: correct number of soundwire ports
ASoC: renesas: rz-ssi: Use proper dma_buffer_pos after resume
ASoC: soc_sdw_utils: remove cs42l43 component_name
ASoC: fsl_sai: Fix sync error in consumer mode
ASoC: Fix build for sdw_utils
ALSA: hda/realtek: Fix mute led for HP Victus 15-fa1xxx (MB 8C2D)
ASoC: rt721: fix prepare clock stop failed
ALSA: usb-audio: don't log messages meant for 1810c when initializing 1824c
ASoC: mediatek: Fix double pm_runtime_disable in remove functions
ASoC: fsl_micfil: correct the endian format for DSD
ASoC: fsl_sai: fix bit order for DSD format
ASoC: Intel: avs: Use snd_codec format when initializing probe
ASoC: Intel: avs: Disable periods-elapsed work when closing PCM
ASoC: Intel: avs: Unprepare a stream when XRUN occurs
ASoC: sdw_utils: add name_prefix for rt1321 part id
ASoC: qdsp6: q6asm: do not sleep while atomic
ASoC: Intel: soc-acpi-intel-ptl-match: Remove cs42l43 match from sdw link3
ASOC: max98090/91: fix for filter configuration: AHPF removed DMIC2_HPF added
ASoC: amd: acp: Add ACP7.0 match entries for cs35l56 and cs42l43
...
For some reason we ended up limiting the number of soundwire ports to 2
in the bindings, the actual codec supports 4 rx and 5 tx ports.
Fixes: 88d0d17192 ("ASoC: dt-bindings: add bindings for pm4125 audio codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251029144636.357203-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 267bca002c ("dt-bindings: net: sparx5: correct LAN969x register
space windows") said that LAN969x has exactly two address spaces ("reg"
property) but implemented it as 2 or more. Narrow the constraint to
properly express that only two items are allowed, which also matches
Linux driver.
Fixes: 267bca002c ("dt-bindings: net: sparx5: correct LAN969x register space windows")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251026101741.20507-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4mow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykXPACfVp7KKDyM+10AxrV/xccYT53iUaAAoMQEWvES
/0acQXalH6XunybjHkOd
=cBYS
-----END PGP SIGNATURE-----
Merge tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4nSw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yliXgCfZzBRNhHGVV0gQrBy2dz9owzfhLQAoISf3He8
dwzYP7TSYXungxfq9dSL
=NaGG
-----END PGP SIGNATURE-----
Merge tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
A moderately large collection of device specific changes here, mostly
fixes but also including a few new quirks and device IDs. This is all
fairly routine even for the affected devices.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmj7d0kACgkQJNaLcl1U
h9DNGgf+KWDwiPttn2gYGm4h5uEDix23aO7FOaRTAoFihWDaqvCz4V+wukRqdRE2
eyxfwQmupdQV+X+/a+ufBnQfHerHUjt2MUxZgBQTMgZ+JwFYVAtiyJszuCPw7LJH
h88UUIhQhkbtshDScNIzwTaEZ7ZMubULKIayxuweHIV0tToTrDpra5WQbMzApcyb
chvfY15sVncZizGxxgfdkFgK4MjKWzDzQNws4ik4XBq+aIX/AxgndoV8wgQW7pyq
CXNsYWE70J9n+pSqBFpSSlEYvOlx/Tca4s342rRZyY7lKZHwq3PkhhGqp4BsQcMj
t6+mpgdgmhQpT6fu42RxHM40y/XfWA==
=3b9V
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A moderately large collection of device specific changes here, mostly
fixes but also including a few new quirks and device IDs. This is all
fairly routine even for the affected devices"
* tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: spi-rockchip: Add RK3506 compatible
spi: intel-pci: Add support for Intel Wildcat Lake SPI serial flash
spi: intel-pci: Add support for Arrow Lake-H SPI serial flash
spi: intel: Add support for 128M component density
spi: airoha: fix reading/writing of flashes with more than one plane per lun
spi: airoha: switch back to non-dma mode in the case of error
spi: airoha: add support of dual/quad wires spi modes to exec_op() handler
spi: airoha: return an error for continuous mode dirmap creation cases
spi: amlogic: fix spifc build error
spi: cadence-quadspi: Fix pm_runtime unbalance on dma EPROBE_DEFER
spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection
spi: spi-nxp-fspi: add extra delay after dll locked
spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate
spi: dw-mmio: add error handling for reset_control_deassert()
spi: rockchip-sfc: Fix DMA-API usage
spi: dt-bindings: cadence: add soc-specific compatible strings for zynqmp and versal-net
The "groups" property can hold multiple entries (e.g.
toshiba/tmpv7708-rm-mbrc.dts file), so allow that by dropping incorrect
type (pinmux-node.yaml schema already defines that as string-array) and
adding constraints for items. This fixes dtbs_check warnings like:
toshiba/tmpv7708-rm-mbrc.dtb: pinctrl@24190000 (toshiba,tmpv7708-pinctrl):
pwm-pins:groups: ['pwm0_gpio16_grp', 'pwm1_gpio17_grp', 'pwm2_gpio18_grp', 'pwm3_gpio19_grp'] is too long
Fixes: 1825c1fe00 ("pinctrl: Add DT bindings for Toshiba Visconti TMPV7700 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
All driver fixes. The big change is the storvsc one to rejig the
hyper-v channel handling to be more efficient for SMP virtual
machines.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaPkVaxsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIViLgD+L8yF/GV9a3JzXbdaM24RzhgR9c4exIrG
XlHyqBIl6nAA/0Vj2vNNRNMGe0NCJJ7qyWFfH9ecYrqASa+9NQnjBfL8
=8LEK
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All driver fixes. The big change is the storvsc one to rejig the
hyper-v channel handling to be more efficient for SMP virtual
machines"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Kaanapali
scsi: ufs: qcom: dt-bindings: Document the Kaanapali UFS controller
scsi: libfc: Prevent integer overflow in fc_fcp_recv_data()
scsi: qla4xxx: Fix typos in comments
scsi: storvsc: Prefer returning channel with the same CPU as on the I/O issuing CPU
The SPI controller found in the RK3506 SoC is still compatible to the
original one introduced with the RK3066, so add the RK3506 compatible
to the list of its variants.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251022004200.204276-1-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The SCIF instances on R-Car Gen5 have a single interrupt, just like on
other R-Car SoCs.
Fixes: 6ac1d60473 ("dt-bindings: serial: sh-sci: Document r8a78000 bindings")
Cc: stable <stable@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/09bc9881b31bdb948ce8b69a2b5acf633f5505a4.1759920441.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A collection of small fixes. All changes are rather boring
device-specific fixes and quirks.
- A few fixes for missing NULL checks
- ASoC NAU8821 fixes for jack and irq handling
- Various fixes for ASoC TAS2781, IDT821034, sc8280xp, max9809x,
wcd938x, and SoundWire
- Usual HD-audio and USB-audio quirks
-----BEGIN PGP SIGNATURE-----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=9RjP
-----END PGP SIGNATURE-----
Merge tag 'sound-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are rather boring
device-specific fixes and quirks:
- A few fixes for missing NULL checks
- ASoC NAU8821 fixes for jack and irq handling
- Various fixes for ASoC TAS2781, IDT821034, sc8280xp, max9809x,
wcd938x, and SoundWire
- Usual HD-audio and USB-audio quirks"
* tag 'sound-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ALSA: hda/realtek: Fix mute led for HP Omen 17-cb0xxx
ALSA: usb-audio: fix vendor quirk for Logitech H390
ALSA: usb-audio: add volume quirks for MS LifeChat LX-3000
ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails
ASoC: max98090/91: fixed max98091 ALSA widget powering up/down
ASoC: dt-bindings: Add compatible string fsl,imx-audio-tlv320
ASoC: codecs: wcd938x-sdw: remove redundant runtime pm calls
ASoC: sdw_utils: add rt1321 part id to codec_info_list
ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card
ALSA: firewire: amdtp-stream: fix enum kernel-doc warnings
ALSA: usb-audio: add mixer_playback_min_mute quirk for Logitech H390
ASoC: nau8821: Avoid unnecessary blocking in IRQ handler
ASoC: nau8821: Add DMI quirk to bypass jack debounce circuit
ASoC: nau8821: Consistently clear interrupts before unmasking
ASoC: nau8821: Generalize helper to clear IRQ status
ASoC: nau8821: Cancel jdet_work before handling jack ejection
ASoC: codecs: Fix gain setting ranges for Renesas IDT821034 codec
ASoC: tas2781: Update ti,tas2781.yaml for adding tas58xx
ASoC: tas2781: Support more newly-released amplifiers tas58xx in the driver
ASoC: qcom: sc8280xp: Add support for QCS615
...
Merge series from Le Qi <le.qi@oss.qualcomm.com>:
This patch series adds support for the QCS615 sound card:
- Updates device tree bindings for SM8250 to include QCS615.
- Adds QCS615 support in the SC8280XP ASoC driver.
Add compatible string fsl,imx-audio-tlv320 to fix below CHECK_DTBS warning:
arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dtb: /sound: failed to match any schema with compatible: ['fsl,imx-audio-tlv320']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251010160321.2130093-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for QCS615 sound card, which looks fully
compatible with existing SM8250.
Signed-off-by: Le Qi <le.qi@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251009090619.1097388-2-le.qi@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing multiport controller binding to target list.
Fix minItems for interrupt-names to avoid the following error on High
Speed controller:
usb@a200000: interrupt-names: ['dwc_usb3', 'pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
Fixes: 6e762f7b8e ("dt-bindings: usb: Introduce qcom,snps-dwc3")
Cc: stable@vger.kernel.org
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ports definition currently defined in the usb-switch.yaml
fits standards devices which are either recipient of altmode
muxing and orientation switching events or an element of the
USB Super Speed data lanes.
This doesn't necessarely fit combo PHYs like the Qualcomm
USB3/DP Combo which has a different ports representation.
Move the ports definition to a separate usb-switch-ports.yaml
and reference it next to the usb-switch.yaml, except for
the Qualcomm USB3/DP Combo PHY bindings.
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/175462129176.394940.16810637795278334342.robh@kernel.org/
Fixes: 3bad7fe227 ("dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only i.MX8MP need dma-range property to let USB controller work properly.
Remove dma-range from required list and add limitation for imx8mp.
Fixes: d2a704e297 ("dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings")
Cc: stable <stable@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Allow child nodes on renesas-bsc bus binding
- Drop node name pattern on allwinner,sun50i-a64-de2 bus binding
- Switch DT patchwork to kernel.org from ozlabs.org
- Fix some typos in docs and bindings
- Fix reference count in PCI node unittest
-----BEGIN PGP SIGNATURE-----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=7vRd
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Allow child nodes on renesas-bsc bus binding
- Drop node name pattern on allwinner,sun50i-a64-de2 bus binding
- Switch DT patchwork to kernel.org from ozlabs.org
- Fix some typos in docs and bindings
- Fix reference count in PCI node unittest
* tag 'devicetree-fixes-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: bus: renesas-bsc: allow additional properties
dt-bindings: bus: allwinner,sun50i-a64-de2: don't check node names
MAINTAINERS: Move DT patchwork to kernel.org
of: unittest: Fix device reference count leak in of_unittest_pci_node_verify
of: doc: Fix typo in doc comments.
dt-bindings: mmc: Correct typo "upto" to "up to"
Allow additional properties to enable devices attached to the bus.
Fixes warnings like these:
arch/arm/boot/dts/renesas/sh73a0-kzm9g.dtb: bus@fec10000 (renesas,bsc-sh73a0): Unevaluated properties are not allowed ('ethernet@10000000' was unexpected)
arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dtb: bus@fec10000 (renesas,bsc-r8a73a4): Unevaluated properties are not allowed ('ethernet@8000000', 'flash@0' were unexpected)
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Node names are already and properly checked by the core schema. No need
to do it again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[robh: Also drop [A-F] in unit address]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
- Second part of rtl9300 updates since dependencies are in now
- general cleanups, implemented block read/write support, added RTL9310 support
- DT schema conversion of hix5hd2 binding
- namespace cleanup for i2c-algo-pca
- minor simplification for mt65xx
-----BEGIN PGP SIGNATURE-----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=4NUB
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- Second part of rtl9300 updates since dependencies are in now:
- general cleanups
- implement block read/write support
- add RTL9310 support
- DT schema conversion of hix5hd2 binding
- namespace cleanup for i2c-algo-pca
- minor simplification for mt65xx
* tag 'i2c-for-6.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: hisilicon,hix5hd2: convert to DT schema
i2c: mt65xx: convert set_speed function to void
i2c: rename wait_for_completion callback to wait_for_completion_cb
i2c: rtl9300: add support for RTL9310 I2C controller
dt-bindings: i2c: realtek,rtl9301-i2c: extend for RTL9310 support
i2c: rtl9300: use scoped guard instead of explicit lock/unlock
i2c: rtl9300: separate xfer configuration and execution
i2c: rtl9300: do not set read mode on every transfer
i2c: rtl9300: move setting SCL frequency to config_io
i2c: rtl9300: rename internal sda_pin to sda_num
dt-bindings: i2c: realtek,rtl9301-i2c: fix wording and typos
i2c: rtl9300: use regmap fields and API for registers
i2c: rtl9300: Implement I2C block read and write
Convert the Devicetree binding documentation for hisilicon,hix5hd2-i2c
from plain text to DT binding schema.
Signed-off-by: Kael D'Alcamo <dev@kael-k.io>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
- a number of conversions to yaml/json schema and fixes for
input-related device tree bindings
- a new driver for Awinic AW86927 haptic chip
- a new driver for Hynitron CST816x series controller
- a new driver for add Himax HX852x(ES) touchscreen controller
- a fix to uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- a fix to prevent overflow in pressure calculation in tsc2007 driver
causing phantom touches
- a change to Atmel maxTouch driver to support generic touchscreen
configuration (flip, rotate, etc.)
- support for platform data was dropped in tca8418_keypad,
pxa27x-keypad, spear-keyboard and twl4030_keypad drivers, they all
now rely on generic device properties for configuration
- other assorted changes and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaOX1HQAKCRBAj56VGEWX
nC29AQCsDm6HBKXJZl6nAI8WHQiSvASFvyFlF6scVnfueX54mQEA6eE428+Cr1Sn
mDiwL38Es+PlZbdsi0J2q0vYzpr4yQU=
=JZIn
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Conversions to yaml/json schema and fixes for input-related device
tree bindings
- New drivers:
- Awinic AW86927 haptic chip
- Hynitron CST816x series controller
- Himax HX852x(ES) touchscreen controller
- Fix uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- Prevent overflow in pressure calculation in tsc2007 driver causing
phantom touches
- Make the Atmel maxTouch driver support generic touchscreen
configuration (flip, rotate, etc)
- Drop support for platform data in tca8418_keypad, pxa27x-keypad,
spear-keyboard and twl4030_keypad drivers, they all now rely on
generic device properties for configuration
- Other assorted changes and fixes
* tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: atmel_mxt_ts - allow reset GPIO to sleep
Input: aw86927 - fix error code in probe()
Input: psxpad-spi - add a check for the return value of spi_setup()
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Input: aw86927 - add driver for Awinic AW86927
dt-bindings: input: Add Awinic AW86927
dt-bindings: touchscreen: remove touchscreen.txt
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node
dt-bindings: touchscreen: convert eeti bindings to json schema
Input: pm8941-pwrkey - disable wakeup for resin by default
dt-bindings: input: pm8941-pwrkey: Document wakeup-source property
Input: add driver for Hynitron CST816x series
dt-bindings: input: touchscreen: add hynitron cst816x series
Input: imx6ul_tsc - set glitch threshold by DTS property
dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold
dt-bindings: touchscreen: add debounce-delay-us property
Input: ps2-gpio - fix typo
Input: atmel_mxt_ts - add support for generic touchscreen configurations
dt-bindings: input: maxtouch: add common touchscreen properties
dt-bindings: touchscreen: convert zet6223 bindings to json schema
...
struct clk_ops::determine_rate() instead of the round_rate() one so that we can
remove the round_rate clk_op entirely. Brian has taken up that task which
nobody else has wanted to do for close to a decade. Thanks Brian! This is all
prerequisite work to get to the real task of improving the clk rate setting
process. Once we have determine_rate() used everywhere, we'll be able to do
things like chain the rate request structs in linked lists to order the rate
setting operations or add more parameters without having to change every clk
driver in existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad this is
getting done.
Beyond this change we also have a tweak to the clk_lookup() function in the
core framework to use hashing on the clk name instead of a clk tree walk with
string comparisons. We _still_ rely on the clk name to be unique, because
historically we've used globally unique strings to describe the clk tree
topology. This tree walk becomes increasingly slow as more clks are added to
the system. Searching from the roots for a duplicate is simple but pretty dumb
and it wastes boot time so we're using a hash table as an improvement. Ideally
we wouldn't rely on the strings to be unique at all, relegating them to simply
debug information, but that is future work that will likely require some sort
of Kconfig knob indicating strings aren't used for topology description.
Outside of the core framework changes we have the usual new SoC support and
fixes to clk drivers for things that were discovered once the clks were used by
consumer drivers. Nothing in particular is jumping out at me in the "misc"
pile, except maybe the Amlogic driver that has gone through a refactoring. That
series got a fix from testing in -next though so it seems likely that things
have been getting good test coverage for a couple weeks already.
-----BEGIN PGP SIGNATURE-----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=fjY4
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's a bunch of patches here across drivers/clk/ to migrate drivers
to use struct clk_ops::determine_rate() instead of the round_rate()
one so that we can remove the round_rate clk_op entirely. Brian has
taken up that task which nobody else has wanted to do for close to a
decade. Thanks Brian!
This is all prerequisite work to get to the real task of improving the
clk rate setting process. Once we have determine_rate() used
everywhere, we'll be able to do things like chain the rate request
structs in linked lists to order the rate setting operations or add
more parameters without having to change every clk driver in
existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad
this is getting done.
Beyond this change we also have a tweak to the clk_lookup() function
in the core framework to use hashing on the clk name instead of a clk
tree walk with string comparisons. We _still_ rely on the clk name to
be unique, because historically we've used globally unique strings to
describe the clk tree topology. This tree walk becomes increasingly
slow as more clks are added to the system. Searching from the roots
for a duplicate is simple but pretty dumb and it wastes boot time so
we're using a hash table as an improvement. Ideally we wouldn't rely
on the strings to be unique at all, relegating them to simply debug
information, but that is future work that will likely require some
sort of Kconfig knob indicating strings aren't used for topology
description.
Outside of the core framework changes we have the usual new SoC
support and fixes to clk drivers for things that were discovered once
the clks were used by consumer drivers. Nothing in particular is
jumping out at me in the "misc" pile, except maybe the Amlogic driver
that has gone through a refactoring. That series got a fix from
testing in -next though so it seems likely that things have been
getting good test coverage for a couple weeks already"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
reset: aspeed: register AST2700 reset auxiliary bus device
dt-bindings: clock: ast2700: modify soc0/1 clock define
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
...
Document the QMP UFS PHY compatible for Qualcomm Kaanapali to support
physical layer functionality for UFS found on the SoC. Use fallback to
indicate the compatibility of the QMP UFS PHY on the Kaanapali with that
on the SM8750.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document the UFS Controller on the Kaanapali Platform.
Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Message-Id: <20250924-knp-ufs-v1-1-42e0955a1f7c@oss.qualcomm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The MediaTek MT8196 SoC includes an embedded MCU referred to as "GPUEB",
acting as glue logic to control power and frequency of the Mali GPU.
This MCU runs special-purpose firmware for this use, and the main
application processor communicates with it through a mailbox.
Add a binding that describes this mailbox.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The GCE Mailbox needs only one clock and the clock-names can be
used only by the driver (which, for instance, does not use it),
and this is true for all of the currently supported MediaTek SoCs.
Stop requiring to specify clock-names on all non-MT8195 GCEs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Document CPU Control Processor (CPUCP) mailbox controller for Qualcomm
Glymur SoCs. It is software compatible with X1E80100 CPUCP mailbox
controller hence fallback to it.
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmjjqsIACgkQ+iyteGJfRsrJWwCfezTQZPxxtibG4hlqA/zCu7Ld
814Anj+feJH4ZYFJT0n0SztEJU/LNfkn
=T3LI
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-6.18-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- renesas,wdt: Add support for RZ/T2H and RZ/N2H
- Add SMARC-sAM67 support
- Several small fixes and improvements
* tag 'linux-watchdog-6.18-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog/hpwdt New maintianer
dt-bindings: watchdog: add SMARC-sAM67 support
watchdog: mpc8xxx_wdt: Reload the watchdog timer when enabling the watchdog
watchdog: visconti: don't print superfluous errors
watchdog: rzv2h_wdt: don't print superfluous errors
watchdog: rzg2l_wdt: don't print superfluous errors
watchdog: s3c2410_wdt: exynosautov9: Enable supported features
watchdog: s3c2410_wdt: exynosautov920: Enable QUIRK_HAS_32BIT_CNT
watchdog: s3c2410_wdt: Increase max timeout value of watchdog
watchdog: s3c2410_wdt: Fix max_timeout being calculated larger
watchdog: s3c2410_wdt: Replace hardcoded values with macro definitions
watchdog: rzv2h: Improve error strings and add newlines
watchdog: rzv2h: Add support for RZ/T2H
watchdog: rzv2h: Add support for configurable count clock source
watchdog: rzv2h: Make "oscclk" and reset controller optional
watchdog: rzv2h: Obtain clock-divider and timeout values from OF match data
dt-bindings: watchdog: renesas,wdt: Add support for RZ/T2H and RZ/N2H
watchdog: intel_oc_wdt: Do not try to write into const memory
- Speed up clk_core_lookup() by using a hashtable
* clk-microchip:
ARM: at91: remove default values for PMC_PLL_ACR
clk: at91: add ACR in all PLL settings
clk: at91: sam9x7: Add peripheral clock id for pmecc
clk: at91: clk-master: Add check for divide by 3
clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register
ARM: at91: pm: save and restore ACR during PLL disable/enable
* clk-lookup:
clk: Use hashtable for global clk lookups
clk: Sort include statements
* clk-st:
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
-----BEGIN PGP SIGNATURE-----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=BUw/
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
New support:
- Intel idxd Wildcat Lake family support
- SpacemiT K1 PDMA controller support
- Renesas RZ/G3E family support
Updates:
- Xilinx shutdown support and dma client properties update
- Designware edma callback_result support
-----BEGIN PGP SIGNATURE-----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=C5z7
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A couple of new device support and small driver updates for this
round.
New support:
- Intel idxd Wildcat Lake family support
- SpacemiT K1 PDMA controller support
- Renesas RZ/G3E family support
Updates:
- Xilinx shutdown support and dma client properties update
- Designware edma callback_result support"
* tag 'dmaengine-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dt-bindings: dma: rz-dmac: Document RZ/G3E family of SoCs
dmaengine: dw-edma: Set status for callback_result
dmaengine: mv_xor: match alloc_wc and free_wc
dmaengine: mmp_pdma: Add SpacemiT K1 PDMA support with 64-bit addressing
dmaengine: mmp_pdma: Add operations structure for controller abstraction
dmaengine: mmp_pdma: Add reset controller support
dmaengine: mmp_pdma: Add clock support
dt-bindings: dma: Add SpacemiT K1 PDMA controller
dt-bindings: dmaengine: xilinx_dma: Remove DMA client properties
dmaengine: Fix dma_async_tx_descriptor->tx_submit documentation
dmaengine: xilinx_dma: Support descriptor setup from dma_vecs
dmaengine: sh: setup_xref error handling
dmaengine: Replace zero-length array with flexible-array
dmaengine: ppc4xx: Remove space before newline
dmaengine: idxd: Add a new IAA device ID for Wildcat Lake family platforms
dmaengine: idxd: Replace memset(0) + strscpy() with strscpy_pad()
dt-bindings: dma: nvidia,tegra20-apbdma: Add undocumented compatibles and "clock-names"
dmaengine: zynqmp_dma: Add shutdown operation support
- New Support
- Qualcomm SM8750 QMP PCIe PHY dual lane support, PMIV0104 eusb2 repeater
support, QCS8300 eDP PHY support
- Renesas RZ/T2H and RZ/N2H support and updates to driver for that
- TI TCAN1051 phy support
- Rockchip rk3588 dphy support, RK3528 combphy support
- Updates
- cadence updates for calibration and polling for ready and enabling of
lower resolutions, runtime pm support,
- Rockchip: enable U3 otg port
- Renesas USXGMII mode support
- Qualcomm UFS PHY and PLL regulator load support
-----BEGIN PGP SIGNATURE-----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=UiHw
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"The usual bunch of device support and update to drivers.
New Support
- Qualcomm SM8750 QMP PCIe PHY dual lane support, PMIV0104 eusb2
repeater support, QCS8300 eDP PHY support
- Renesas RZ/T2H and RZ/N2H support and updates to driver for that
- TI TCAN1051 phy support
- Rockchip rk3588 dphy support, RK3528 combphy support
Updates:
- cadence updates for calibration and polling for ready and enabling
of lower resolutions, runtime pm support,
- Rockchip: enable U3 otg port
- Renesas USXGMII mode support
- Qualcomm UFS PHY and PLL regulator load support"
* tag 'phy-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (64 commits)
phy: rockchip: phy-rockchip-inno-csidphy: add support for rk3588 variant
phy: rockchip: phy-rockchip-inno-csidphy: allow for different reset lines
phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0
dt-bindings: phy: rockchip-inno-csi-dphy: add rk3588 variant
dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non-required
phy: cadence: cdns-dphy: Enable lower resolutions in dphy
phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet
phy: renesas: r8a779f0-ether-serdes: add USXGMII mode
phy: sophgo: Add USB 2.0 PHY driver for Sophgo CV18XX/SG200X
dt-bindings: phy: Add Sophgo CV1800 USB phy
phy: cadence: cdns-dphy: Update calibration wait time for startup state machine
phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
phy: renesas: rcar-gen3-usb2: Fix ID check logic with VBUS valid
dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051
phy: lynx-28g: check return value when calling lynx_28g_pll_get
phy: qcom: m31-eusb2: Fix the error log while enabling clock
phy: rockchip: usbdp: Remove redundant ternary operators
phy: renesas: rcar-gen3-usb2: Remove redundant ternary operators
phy: hisilicon: Remove redundant ternary operators
phy: qcom-qmp-ufs: Add PHY and PLL regulator load
...
- Improve the DT bindings documentation for the highbanck, imx and
xgene-ahci controllers (Krzysztof, Fabio, Rob).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCaOMqsAAKCRDdoc3SxdoY
dj/YAP99ErzH54Tr7Rjg3VtctK1aMpoVD1TOsFA2Dhm0AIXMVwD8DMXhXwk9mXGc
5JQvxMzDbkhTYOqWKhFewrJfACkpdQM=
=8u1H
-----END PGP SIGNATURE-----
Merge tag 'ata-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Improve the DT bindings documentation for the highbanck, imx and
xgene-ahci controllers (Krzysztof, Fabio, Rob)
* tag 'ata-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
dt-bindings: ata: apm,xgene-ahci: Add apm,xgene-ahci-v2 support
dt-bindings: ata: imx: Document 'target-supply'
dt-bindings: ata: highbank: Minor whitespace cleanup in example
