This is a printf-style function, which gcc -Werror=suggest-attribute=format
correctly points out:
drivers/hwmon/occ/common.c: In function 'occ_init_attribute':
drivers/hwmon/occ/common.c:761:9: error: function 'occ_init_attribute' might be a candidate for 'gnu_printf' format attribute [-Werror=suggest-attribute=format]
Add the attribute to avoid this warning and ensure any incorrect
format strings are detected here.
Fixes: 744c2fe950 ("hwmon: (occ) Rework attribute registration for stack usage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20260203163440.2674340-1-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When CONFIG_PM is disabled, the GPIO controlled FANs can't be stopped by
using the sysfs attributes since commit 0d01110e63 ("hwmon: (gpio-fan)
Add regulator support").
Using either the 'pwm1' or the 'fan1_target' attribute fails the same way:
$ echo 0 > /sys/class/hwmon/hwmon1/pwm1
ash: write error: Function not implemented
$ echo 0 > /sys/class/hwmon/hwmon1/fan1_target
ash: write error: Function not implemented
Both commands were working flawlessly before the mentioned commit.
The issue happens because pm_runtime_put_sync() returns with -ENOSYS
when CONFIG_PM is disabled, and the set_fan_speed() function handles
this as an error.
In order to restore the previous behaviour, change the error check in
the set_fan_speed() function to ignore the -ENOSYS error code.
Cc: stable@vger.kernel.org
Fixes: 0d01110e63 ("hwmon: (gpio-fan) Add regulator support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20260202-gpio-fan-stop-fix-v1-1-c7853183d93d@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The set_rpm function is used as a 'store' callback of a device attribute,
and as such it should return with the number of bytes consumed. However
since commit 0d01110e63 ("hwmon: (gpio-fan) Add regulator support"),
the function returns with zero on success.
Due to this, the function gets called again and again whenever the user
tries to change the FAN speed by writing the desired RPM value into the
'fan1_target' sysfs attribute.
The broken behaviour can be reproduced easily. For example, the following
command never returns unless it gets terminated:
$ echo 500 > /sys/class/hwmon/hwmon1/fan1_target
^C
$
Change the code to return with the same value as the 'count' parameter
on success to indicate that all bytes from the input buffer are consumed.
The function behaved the same way prior to the offending change.
Cc: stable@vger.kernel.org
Fixes: 0d01110e63 ("hwmon: (gpio-fan) Add regulator support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20260201-gpio-fan-set_rpm-retval-fix-v1-1-dc39bc7693ca@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The acpi_power_meter driver's .notify() callback function,
acpi_power_meter_notify(), calls hwmon_device_unregister() under a lock
that is also acquired by callbacks in sysfs attributes of the device
being unregistered which is prone to deadlocks between sysfs access and
device removal.
Address this by moving the hwmon device removal in
acpi_power_meter_notify() outside the lock in question, but notice
that doing it alone is not sufficient because two concurrent
METER_NOTIFY_CONFIG notifications may be attempting to remove the
same device at the same time. To prevent that from happening, add a
new lock serializing the execution of the switch () statement in
acpi_power_meter_notify(). For simplicity, it is a static mutex
which should not be a problem from the performance perspective.
The new lock also allows the hwmon_device_register_with_info()
in acpi_power_meter_notify() to be called outside the inner lock
because it prevents the other notifications handled by that function
from manipulating the "resource" object while the hwmon device based
on it is being registered. The sending of ACPI netlink messages from
acpi_power_meter_notify() is serialized by the new lock too which
generally helps to ensure that the order of handling firmware
notifications is the same as the order of sending netlink messages
related to them.
In addition, notice that hwmon_device_register_with_info() may fail
in which case resource->hwmon_dev will become an error pointer,
so add checks to avoid attempting to unregister the hwmon device
pointer to by it in that case to acpi_power_meter_notify() and
acpi_power_meter_remove().
Fixes: 16746ce8ad ("hwmon: (acpi_power_meter) Replace the deprecated hwmon_device_register")
Closes: https://lore.kernel.org/linux-hwmon/CAK8fFZ58fidGUCHi5WFX0uoTPzveUUDzT=k=AAm4yWo3bAuCFg@mail.gmail.com/
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
On the Dell G15 5510, fans spin at maximum speed when AC power is
connected. This behavior has been observed as a regression in recent
kernels (v6.18+).
Add the Dell G15 5510 to the fan control whitelist to enable manual fan
control and resolve the issue. This model requires the same fan control
configuration as the Dell G15 5511.
Fixes: 1c1658058c ("hwmon: (dell-smm) Add support for automatic fan mode")
Signed-off-by: Leo Banno-Cloutier <leobannocloutier@gmail.com>
Link: https://lore.kernel.org/r/20260117015315.214569-2-leobannocloutier@gmail.com
[groeck: Updated patch description to follow guidance]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver computes conversion intervals using the formula:
interval = (1 << (7 - rate)) * 125ms
where 'rate' is the sensor's conversion rate register value. According to
the datasheet, the power-on reset value of this register is 0x8, which
could be assigned to the register, after handling i2c general call.
Using this default value causes a result greater than the bit width of
left operand and an undefined behaviour in the calculation above, since
shifting by values larger than the bit width is undefined behaviour as
per C language standard.
Limit the maximum usable 'rate' value to 7 to prevent undefined
behaviour in calculations.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Note (groeck):
This does not matter in practice unless someone overwrites the chip
configuration from outside the driver while the driver is loaded.
The conversion time register is initialized with a value of 5 (500ms)
when the driver is loaded, and the driver never writes a bad value.
Fixes: ca53e7640d ("hwmon: (tmp401) Convert to _info API")
Signed-off-by: Alexey Simakov <bigalex934@gmail.com>
Link: https://lore.kernel.org/r/20251211164342.6291-1-bigalex934@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ibmpex_high_low_store() function retrieves driver data using
dev_get_drvdata() and uses it without validation. This creates a race
condition where the sysfs callback can be invoked after the data
structure is freed, leading to use-after-free.
Fix by adding a NULL check after dev_get_drvdata(), and reordering
operations in the deletion path to prevent TOCTOU.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 57c7c3a0fd ("hwmon: IBM power meter driver")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://lore.kernel.org/r/MEYPR01MB7886BE2F51BFE41875B74B60AFA0A@MEYPR01MB7886.ausprd01.prod.outlook.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The fan nominal speed returned by SMM is limited to 16 bits, but the
driver allows the fan multiplier to be set via a module parameter.
Clamp the computed fan multiplier so that fan_nominal_speed *
i8k_fan_mult always fits into a signed 32-bit integer and refuse to
initialize the driver if the value is too large.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 20bdeebc88 ("hwmon: (dell-smm) Introduce helper function for data init")
Signed-off-by: Denis Sergeev <denserg.edu@gmail.com>
Link: https://lore.kernel.org/r/20251209063706.49008-1-denserg.edu@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Subsystem:
- Add HDR transfer support
Drivers:
- dw: fix bus hang on Agilex5
- mipi-i3c-hci: Intel Nova Lake-S support, IOMMU support
- svc: HDR support
-----BEGIN PGP SIGNATURE-----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=qQUB
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"HDR support has finally been added. mipi-i3c-hci has been reworked and
Intel Nova Lake-S support has been added.
Subsystem:
- Add HDR transfer support
Drivers:
- dw: fix bus hang on Agilex5
- mipi-i3c-hci: Intel Nova Lake-S support, IOMMU support
- svc: HDR support"
* tag 'i3c/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (28 commits)
regmap: i3c: switch to use i3c_xfer from i3c_priv_xfer
net: mctp i3c: switch to use i3c_xfer from i3c_priv_xfer
hwmon: (lm75): switch to use i3c_xfer from i3c_priv_xfer
i3c: document i3c_xfers
i3c: fix I3C_SDR bit number
i3c: master: svc: Add basic HDR mode support
i3c: master: svc: Replace bool rnw with union for HDR support
i3c: Switch to use new i3c_xfer from i3c_priv_xfer
i3c: Add HDR API support
i3c: master: add WQ_PERCPU to alloc_workqueue users
i3c: master: Remove i3c_device_free_ibi from i3c_device_remove
i3c: mipi-i3c-hci-pci: Set d3cold_delay to 0 for Intel controllers
i3c: mipi-i3c-hci-pci: Add LTR support for Intel controllers
i3c: mipi-i3c-hci-pci: Add exit callback
i3c: mipi-i3c-hci-pci: Change callback parameter
i3c: mipi-i3c-hci-pci: Allocate a structure for mipi_i3c_hci_pci device information
i3c: mipi-i3c-hci-pci: Factor out intel_reset()
i3c: mipi-i3c-hci-pci: Factor out private registers ioremapping
i3c: mipi-i3c-hci-pci: Constify driver data
i3c: mipi-i3c-hci-pci: Use readl_poll_timeout()
...
The for_each_child_of_node() macro automatically manages device node
reference counts during normal iteration. However, when breaking out
of the loop early with return, the current iteration's node is not
automatically released, leading to a reference count leak.
Fix this by adding of_node_put(child) before returning from the loop
when emc2305_set_single_tz() fails.
This issue could lead to memory leaks over multiple probe cycles.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/tencent_5CDC08544C901D5ECA270573D5AEE3117108@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
./drivers/hwmon/emc2305.c:597:4-15: ERROR: probable double put
Device node iterators put the previous value of the index variable, so an
explicit put causes a double put.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/tencent_CD373F952BE48697C949E39CB5EB77841D06@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The documentation states that on machines supporting only global
fan mode control, the pwmX_enable attributes should only be created
for the first fan channel (pwm1_enable, aka channel 0).
Fix the off-by-one error caused by the fact that fan channels have
a zero-based index.
Cc: stable@vger.kernel.org
Fixes: 1c1658058c ("hwmon: (dell-smm) Add support for automatic fan mode")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20251203202109.331528-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The macro FAN_FROM_REG evaluates its arguments multiple times. When used
in lockless contexts involving shared driver data, this leads to
Time-of-Check to Time-of-Use (TOCTOU) race conditions, potentially
causing divide-by-zero errors.
Convert the macro to a static function. This guarantees that arguments
are evaluated only once (pass-by-value), preventing the race
conditions.
Additionally, in store_fan_div, move the calculation of the minimum
limit inside the update lock. This ensures that the read-modify-write
sequence operates on consistent data.
Adhere to the principle of minimal changes by only converting macros
that evaluate arguments multiple times and are used in lockless
contexts.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Fixes: 9873964d6e ("[PATCH] HWMON: w83791d: New hardware monitoring driver for the Winbond W83791D")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251202180105.12842-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* New drivers
- Driver for Apple Silicon SMC
- Driver for TSC1641 I2C power monitor
- Driver for MPS MP9945
- Driver for MAX17616
- Driver for MP2925 and MP2929
* Added support for new devices to existing drivers
- dell-smm: Add Dell G5 5505 to fan control whitelist
- aspeed-g6-pwm-tach: Support for AST2700
- asus-ec-sensors: Support for ROG STRIX X470-I GAMING,
ROG STRIX X870-F GAMING WIFI, ROG STRIX X870E-H GAMING WIFI7,
and Pro WS TRX50-SAGE WIFI
- k10temp: Support for AMD Steam Deck APU ID
- pmbus/isl68137: Support for raa229141
- aht10: Support for dht20
- adt7410: Support for ADT7422
- peci: Support for Intel Emerald Rapids
- nct6775: Support for ASUS ROG STRIX X870E-H GAMING WIFI7
- pmbus/max34440: Support for ADPM12200
- ntc-thermistor: Support for Murata ncp18wm474
* Infrastructure updates
- Utilize subsystem locking in various drivers
- ltc4282, ltc2947: Use the new energy64 attribute
* Bug fixes
- Various drivers: Fixes to avoid TOCTOU, mostly in macro functions
evaluating parameters multiple times, as well as missing locks
- max6697: Fix regmap leak on probe failure
- sy7636a: Fix regulator_enable resource leak on error path
- asus-ec-sensors: Correct Pro WS TRX50-SAGE WIFI entry
* Other changes and improvements
- w83781d, lm78: Drop REALLY_SLOW_IO
- Fix broken datasheet links in various drivers
* Various other minor fixes and improvements
-----BEGIN PGP SIGNATURE-----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=NviP
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Apple Silicon SMC
- TSC1641 I2C power monitor
- MPS MP9945
- MAX17616
- MP2925 and MP2929
Added support for new devices to existing drivers:
- dell-smm: Add Dell G5 5505 to fan control whitelist
- aspeed-g6-pwm-tach: Support for AST2700
- asus-ec-sensors: Support for ROG STRIX X470-I GAMING, ROG STRIX
X870-F GAMING WIFI, ROG STRIX X870E-H GAMING WIFI7, and Pro WS
TRX50-SAGE WIFI
- k10temp: Support for AMD Steam Deck APU ID
- pmbus/isl68137: Support for raa229141
- aht10: Support for dht20
- adt7410: Support for ADT7422
- peci: Support for Intel Emerald Rapids
- nct6775: Support for ASUS ROG STRIX X870E-H GAMING WIFI7
- pmbus/max34440: Support for ADPM12200
- ntc-thermistor: Support for Murata ncp18wm474
Infrastructure updates:
- Utilize subsystem locking in various drivers
- ltc4282, ltc2947: Use the new energy64 attribute
Bug fixes:
- Various drivers: Fixes to avoid TOCTOU, mostly in macro functions
evaluating parameters multiple times, as well as missing locks
- max6697: Fix regmap leak on probe failure
- sy7636a: Fix regulator_enable resource leak on error path
- asus-ec-sensors: Correct Pro WS TRX50-SAGE WIFI entry
Other changes and improvements:
- w83781d, lm78: Drop REALLY_SLOW_IO
- Fix broken datasheet links in various drivers
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (110 commits)
hwmon: (dell-smm) Add Dell G5 5505 to fan control whitelist
hwmon: (max16065) Use local variable to avoid TOCTOU
hwmon: (w83l786ng) Convert macros to functions to avoid TOCTOU
hwmon: (max6697) fix regmap leak on probe failure
hwmon/w83781d: Drop REALLY_SLOW_IO setting
hwmon/lm78: Drop REALLY_SLOW_IO setting
hwmon: sy7636a: Fix regulator_enable resource leak on error path
hwmon: (adm1026) Convert macros to functions to avoid TOCTOU
hwmon: (adm1029) Add locking to avoid TOCTOU
hwmon: (lm87) Convert macros to functions to avoid TOCTOU
hwmon: (asus-ec-sensors) correct Pro WS TRX50-SAGE WIFI entry
hwmon: (vt8231) Convert macros to functions to avoid TOCTOU
hwmon: (emc2103) Add locking to avoid TOCTOU
hwmon: (aspeed-g6-pwm-tach): Add AST2700 compatible string
dt-bindings: hwmon: Add AST2700 compatible
hwmon: (asus-ec-sensors) add ROG STRIX X470-I GAMING
hwmon: (vt1211) Convert macros to functions to avoid TOCTOU
hwmon: (k10temp) Add AMD Steam Deck APU ID
hwmon: Add Apple Silicon SMC hwmon driver
Documentation/hwmon: Fix broken datasheet links for zl6100
...
Switch to use i3c_xfer instead of i3c_priv_xfer because framework will
update to support HDR mode. i3c_priv_xfer is now an alias of i3c_xfer.
Replace i3c_device_do_priv_xfers() with i3c_device_do_xfers(..., I3C_SDR)
to align with the new API.
Prepare for removal of i3c_priv_xfer and i3c_device_do_priv_xfers().
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251028-lm75-v1-1-9bf88989c49c@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In max16065_current_show, data->curr_sense is read twice: once for the
error check and again for the calculation. Since
i2c_smbus_read_byte_data returns negative error codes on failure, if the
data changes to an error code between the check and the use, ADC_TO_CURR
results in an incorrect calculation.
Read data->curr_sense into a local variable to ensure consistency. Note
that data->curr_gain is constant and safe to access directly.
This aligns max16065_current_show with max16065_input_show, which
already uses a local variable for the same reason.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Fixes: f5bae2642e ("hwmon: Driver for MAX16065 System Manager and compatibles")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251128124709.3876-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The macros FAN_FROM_REG and TEMP_FROM_REG evaluate their arguments
multiple times. When used in lockless contexts involving shared driver
data, this causes Time-of-Check to Time-of-Use (TOCTOU) race
conditions.
Convert the macros to static functions. This guarantees that arguments
are evaluated only once (pass-by-value), preventing the race
conditions.
Adhere to the principle of minimal changes by only converting macros
that evaluate arguments multiple times and are used in lockless
contexts.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Fixes: 85f03bccd6 ("hwmon: Add support for Winbond W83L786NG/NR")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251128123816.3670-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The i2c regmap allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: 3a2a8cc3fe ("hwmon: (max6697) Convert to use regmap")
Cc: stable@vger.kernel.org # 6.12
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20251127134351.1585-1-johan@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In w83781d_isa_found() there is REALLY_SLOW_IO defined around some port
accesses, probably in order to wait between multiple accesses.
Unfortunately this isn't making any difference compared to not having
this define since more than a decade, as REALLY_SLOW_IO needs to be
defined while "#include <asm/io.h>" is called to have an effect.
As there seem not to be any outstanding issues in spite of this having
no effect, just drop the "#define" and add a remark to the related
comment.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20251126162018.5676-4-jgross@suse.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In lm78_isa_found() there is REALLY_SLOW_IO defined around some port
accesses, probably in order to wait between multiple accesses.
Unfortunately this isn't making any difference compared to not having
this define since more than a decade, as REALLY_SLOW_IO needs to be
defined while "#include <asm/io.h>" is called to have an effect.
As there seem not to be any outstanding issues in spite of this having
no effect, just drop the "#define" and add a remark to the related
comment.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20251126162018.5676-3-jgross@suse.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In sy7636a_sensor_probe(), regulator_enable() is called but if
devm_hwmon_device_register_with_info() fails, the function returns
without calling regulator_disable(), leaving the regulator enabled
and leaking the reference count.
Switch to devm_regulator_get_enable() to automatically
manage the regulator resource.
Fixes: de34a40532 ("hwmon: sy7636a: Add temperature driver for sy7636a")
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251126162602.2086-1-vulab@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The macro FAN_FROM_REG evaluates its arguments multiple times. When used
in lockless contexts involving shared driver data, this causes
Time-of-Check to Time-of-Use (TOCTOU) race conditions.
Convert the macro to a static function. This guarantees that arguments
are evaluated only once (pass-by-value), preventing the race
conditions.
Adhere to the principle of minimal changes by only converting macros
that evaluate arguments multiple times and are used in lockless
contexts.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251126113828.10003-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The function fan_show checks shared data for zero or invalid values
before using it as a divisor. These accesses are currently lockless. If
the data changes to zero between the check and the division, it causes a
divide-by-zero error.
Explicitly acquire the update lock around these checks and calculations
to ensure the data remains stable, preventing Time-of-Check to
Time-of-Use (TOCTOU) race conditions.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251126114047.10039-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The macro FAN_FROM_REG evaluates its arguments multiple times. When used
in lockless contexts involving shared driver data, this causes
Time-of-Check to Time-of-Use (TOCTOU) race conditions.
Convert the macro to a static function. This guarantees that arguments
are evaluated only once (pass-by-value), preventing the race
conditions.
Adhere to the principle of minimal changes by only converting macros
that evaluate arguments multiple times and are used in lockless
contexts.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251126113542.9968-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add missing temperature and fan sensors to Pro WS TRX50-SAGE WIFI
Also:
- Format VRM names to match the BIOS
- Fix swapped VRM_E and VRM_W entries
Signed-off-by: 小太 <nospam@kota.moe>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251125040140.277756-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The macro FAN_FROM_REG evaluates its arguments multiple times. When used
with shared driver data, this leads to Time-of-Check to Time-of-Use
(TOCTOU) race conditions, potentially causing divide-by-zero errors.
Convert the macro to a static function to ensure arguments are evaluated
only once.
Additionally, in fan_div_store, move the reading of the old register
value and the calculation of the minimum limit inside the update lock.
This ensures that the read-modify-write sequence operates on consistent
data, preventing race conditions during fan divider updates.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251124165900.4713-1-hanguidong02@gmail.com
[groeck: Dropped unnecessary line split]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The functions fan1_input_show and fan1_target_show check shared data for
zero before using it as a divisor. These accesses are currently
lockless. If the data changes to zero between the check and the
division, it causes a divide-by-zero error.
Explicitly acquire the update lock around these checks and calculations
to ensure the data remains stable, preventing Time-of-Check to
Time-of-Use (TOCTOU) race conditions.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251124165508.4667-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Extends device tree support to include the AST2700 chip variant by
adding its compatible string to the device match table.
The AST2700 PWM/TACH hardware is compatible with the existing driver
implementation used for AST2600.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20251120-upstream_pwm_tach-v3-2-eaa2f9b300a2@aspeedtech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The macros IN_FROM_REG, TEMP_FROM_REG, and RPM_FROM_REG evaluate their
arguments multiple times. These macros are used in lockless show functions
involving shared driver data, leading to Time-of-Check to Time-of-Use race
conditions.
For example, RPM_FROM_REG checks if a value is 0 or 255, and then uses it
in a division. If the value is modified by another thread to 0 after the
check but before the division, it causes a divide-by-zero error.
Convert these macros to static functions. This guarantees that arguments
are evaluated only once (pass-by-value), fixing the race conditions.
Adhere to the principle of minimal changes by only converting the specific
macros involved in these lockless contexts.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251120041331.1917570-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The System Management Controller on Apple Silicon devices is responsible
for integrating and exposing the data reported by the vast array of
hardware monitoring sensors present on these devices. It is also
responsible for fan control, and allows users to manually set fan
speeds if they so desire. Add a hwmon driver to expose current,
power, temperature, and voltage monitoring sensors, as well as
fan speed monitoring and control via the SMC on Apple Silicon devices.
The SMC firmware has no consistency between devices, even when they
share an SoC. The FourCC keys used to access sensors are almost
random. An M1 Mac mini will have different FourCCs for its CPU core
temperature sensors to an M1 MacBook Pro, for example. For this
reason, the valid sensors for a given device are specified in a
child of the SMC Devicetree node. The driver uses this information
to determine which sensors to make available at runtime.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://lore.kernel.org/r/20251112-macsmc-subdevs-v5-6-728e4b91fe81@gmail.com
[groeck: Added Documentation to index]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Replace two magic values in ccp_device with
existing constants.
Signed-off-by: Marius Zachmann <mail@mariuszachmann.de>
Link: https://lore.kernel.org/r/20251113100024.11103-3-mail@mariuszachmann.de
[groeck: Updated subject to include subsystem/driver]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add error checking when loading temperature channel label defined
in device tree. Handling of error from of_property_read_string()
is inspired by lm90 driver and therefor contain same error string.
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20251111144406.7489-1-bruno.thomsen@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The RAA229141A is a digital dual output multiphase (X+Y ≤ 12) PWM
controller designed to be compliant with Intel VR13, VR13.HC, VR14 and
VR14.Cloud specifications, targeting VCORE and auxiliary rails.
The RAA229141A supports the Intel SVID interface along with PMBus V1.3
specifications, making it ideal for controlling the microprocessor core and
system rails in Intel VR13, VR13.HC, VR14 and VR14.Cloud platforms.
Signed-off-by: Jeff Lin <jefflin994697@gmail.com>
Link: https://lore.kernel.org/r/20251106104519.2014853-1-jefflin994697@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a driver for the ST Microelectronics TSC1641 16-bit high-precision
power monitor. The driver supports reading bus voltage, current, power,
and temperature. Sysfs attributes are exposed for shunt resistor and
update interval. The driver integrates with the hwmon subsystem and
supports optional ALERT pin polarity configuration.
Signed-off-by: Igor Reznichenko <igor@reznichenko.net>
Link: https://lore.kernel.org/r/20251105201406.1210856-3-igor@reznichenko.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The original implement will re-init the EC when it reports a zero
value, and it's a workaround for the black box buggy firmware.
Now a contributer test and report that, the bug is that, the firmware
won't initialize the EC on boot, so the EC ramains in unusable status.
And it won't need to re-init it during runtime. The original implement
is not perfect, any write command will be ignored until we first read
it. Just re-init it unconditionally when the driver load could work.
Fixes: 0ab88e2394 ("hwmon: add GPD devices sensor driver")
Co-developed-by: kylon <3252255+kylon@users.noreply.github.com>
Signed-off-by: kylon <3252255+kylon@users.noreply.github.com>
Link: https://github.com/Cryolitia/gpd-fan-driver/pull/20
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Link: https://lore.kernel.org/r/20251030-win4-v1-1-c374dcb86985@uniontech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Building gpd-fan driver without CONFIG_ACPI results in the following
build errors:
drivers/hwmon/gpd-fan.c: In function ‘gpd_ecram_read’:
drivers/hwmon/gpd-fan.c:228:9: error: implicit declaration of function ‘outb’ [-Werror=implicit-function-declaration]
228 | outb(0x2E, addr_port);
| ^~~~
drivers/hwmon/gpd-fan.c:241:16: error: implicit declaration of function ‘inb’ [-Werror=implicit-function-declaration]
241 | *val = inb(data_port);
The definitions for inb() and outb() come from <linux/io.h>
(specifically through <asm/io.h>), which is implicitly included via
<acpi_io.h>. When CONFIG_ACPI is not set, <acpi_io.h> is not included
resulting in <linux/io.h> to be omitted as well.
Since the driver does not depend on ACPI, remove <linux/acpi.h> and add
<linux/io.h> directly to fix the compilation errors.
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Link: https://lore.kernel.org/r/20251024202042.752160-1-krishnagopi487@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for dht20 temperature and humidity sensor from Aosong.
Modify aht10 driver to handle different init command for dht20 sensor by
adding init_cmd entry in the driver data. dht20 sensor is compatible with
aht10 hwmon driver with this change.
Tested on TI am62x SK board with dht20 sensor connected at i2c-2 port.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Link: https://lore.kernel.org/r/2025112-94320-906858@bhairav-test.ee.iitb.ac.in
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Handling of errors when reading status, temperature, and humidity returns
the error number as negative attribute value. Fix it up by returning
the error as return value.
Fixes: a0ac418c60 ("hwmon: (sht3x) convert some of sysfs interface to hwmon")
Cc: JuenKit Yip <JuenKit_Yip@hotmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver allocates memory for sensor data using devm_kzalloc(), but
did not check if the allocation succeeded. In case of memory allocation
failure, dereferencing the NULL pointer would lead to a kernel crash.
Add a NULL pointer check and return -ENOMEM to handle allocation failure
properly.
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Fixes: 08ebc9def7 ("hwmon: Add Congatec Board Controller monitoring driver")
Reviewed-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20251017063414.1557447-1-liqiang01@kylinos.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In the case of an early return, the reference to the child node needs
to be released.
Use for_each_child_of_node_scoped to fix the issue.
Fixes: 3996187f80 ("hwmon: (pmbus/isl68137) add support for voltage divider on Vout")
Signed-off-by: Erick Karanja <karanja99erick@gmail.com>
Link: https://lore.kernel.org/r/20251012181249.359401-1-karanja99erick@gmail.com
[groeck: Updated subject/description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
devm_request_region() returns a NULL pointer on error, not an ERR_PTR().
Handle it accordingly.
Also fix error return from the call to devm_hwmon_device_register_with_info().
Fixes: 0ab88e2394 ("hwmon: add GPD devices sensor driver")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Link: https://lore.kernel.org/r/20251010204447.94343-1-harshit.m.mogalapalli@oracle.com
[groeck: Updated subject to improve readability]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When platform_get_resource() fails it returns NULL and not an error
pointer, accordingly change the error handling.
Fixes: 0ab88e2394 ("hwmon: add GPD devices sensor driver")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20251010204359.94300-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
