Driver is ready to use intel_gpio_add_pin_ranges() directly instead of
custom approach. Convert it now.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Export intel_gpio_add_pin_ranges() for reuse in other drivers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Replace custom macro with the recently defined INTEL_GPP().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
After commit a934a57a42 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 7d95680d64 ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
pinctrl-intel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
So fix these build warnings for the driver code.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We already have ACPI dependency for Intel pinctrl menu. No need to
repeat it.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* Split devres APIs to a separate header (linux/device/devres.h)
* Move IOMEM_ERR_PTR() to err.h to avoid unneeded loops
* Introduce devm_kmemdup_array()
* Use devm_kmemdup_array() in input, IIO, and pinctrl subsystems
The following is an automated git shortlog grouped by driver:
baytrail:
- copy communities using devm_kmemdup_array()
cherryview:
- use devm_kmemdup_array()
devres:
- Introduce devm_kmemdup_array()
driver core:
- Split devres APIs to device/devres.h
err.h:
- move IOMEM_ERR_PTR() to err.h
iio:
- adc: xilinx-xadc-core: use devm_kmemdup_array()
- imu: st_lsm9ds0: Replace device.h with what is needed
input:
- ipaq-micro-keys: use devm_kmemdup_array()
- sparse-keymap: use devm_kmemdup_array()
intel:
- copy communities using devm_kmemdup_array()
Merge patch series "Split devres APIs to device/devres.h and introduce devm_kmemdup_array()":
- Merge patch series "Split devres APIs to device/devres.h and introduce devm_kmemdup_array()"
pxa2xx:
- use devm_kmemdup_array()
tangier:
- use devm_kmemdup_array()
-----BEGIN PGP SIGNATURE-----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=j1xo
-----END PGP SIGNATURE-----
Merge tag 'ib-devres-iio-input-pinctrl-v6.15' into intel/pinctrl
There are a few Intel pin control drivers that are affected
by the devm_kmemdup_array() conversion, merge the ib-devres-iio-input-pinctrl
for making development going smoothly.
* Split devres APIs to a separate header (linux/device/devres.h)
* Move IOMEM_ERR_PTR() to err.h to avoid unneeded loops
* Introduce devm_kmemdup_array()
* Use devm_kmemdup_array() in input, IIO, and pinctrl subsystems
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Copy communities using devm_kmemdup_array() instead of doing it manually.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When instantiating PWM, the bypass should be set to false. The field
is used for the selected Intel SoCs that do not have PWM feature enabled
in their pin control IPs.
Fixes: eb78d3604d ("pinctrl: intel: Enumerate PWM device when community has a capability")
Reported-by: Alexis GUILLEMET <alexis.guillemet@dunasys.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Alexis GUILLEMET <alexis.guillemet@dunasys.com>
The Intel pinctrl driver can provide a PWM device and for that needs to
call the function devm_pwm_lpss_probe(). That function is provided by
the pwm-lpss driver which intends to export it in the "PWM_LPSS"
namespace. To prepare fixing the pwm-lpss driver to indeed use the
"PWM_LPSS" namespace, import that namespace when used.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Instead of relying on the fact that the parent IRQ chip supports
fasteoi mode and calling the respective callback at the end of
the interrupt handler, surround it with enter and exit helpers
for chained IRQ handlers which will consider all possible cases.
This in particular unifies how GPIO drivers handle IRQ.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Instead of relying on the fact that the parent IRQ chip supports
fasteoi mode and calling the respective callback at the end of
the interrupt handler, surround it with enter and exit helpers
for chained IRQ handlers which will consider all possible cases.
This in particular unifies how GPIO drivers handle IRQ.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
No core changes this time.
New drivers:
- Xlinix Versal pin control driver.
- Ocelot LAN969x pin control driver.
- T-Head TH1520 RISC-V SoC pin control driver.
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC
pin control drivers.
- Qualcomm SM8750 LPASS (low power audio subsystem)
pin control driver.
- Qualcomm PM8937 mixsig IC pin control support, GPIO and
MPP (multi-purpose-pin).
- Samsung Exynos8895 and Exynos9810 SoC pin control driver.
- SpacemiT K1 SoC pin control driver.
- Airhoa EN7581 IC pin control driver.
Improvements:
- The Renesas subdriver now supports schmitt-trigger and
open drain pin configurations if the hardware supports it.
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC.
- Support the DSW community in the Intel Elkhartlake SoC.
-----BEGIN PGP SIGNATURE-----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=F7bj
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time.
New drivers:
- Xlinix Versal pin control driver
- Ocelot LAN969x pin control driver
- T-Head TH1520 RISC-V SoC pin control driver
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin
control drivers
- Qualcomm SM8750 LPASS (low power audio subsystem) pin control
driver
- Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP
(multi-purpose-pin)
- Samsung Exynos8895 and Exynos9810 SoC pin control driver
- SpacemiT K1 SoC pin control driver
- Airhoa EN7581 IC pin control driver
Improvements:
- The Renesas subdriver now supports schmitt-trigger and open drain
pin configurations if the hardware supports it
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC
- Support the DSW community in the Intel Elkhartlake SoC"
* tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: airoha: Use unsigned long for bit search
pinctrl: k210: Undef K210_PC_DEFAULT
pinctrl: qcom: spmi: fix debugfs drive strength
pinctrl: qcom: Add sm8750 pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8750 pinctrl
pinctrl: cy8c95x0: remove unneeded goto labels
pinctrl: cy8c95x0: embed iterator to the for-loop
pinctrl: cy8c95x0: Use temporary variable for struct device
pinctrl: cy8c95x0: use flexible sleeping in reset function
pinctrl: cy8c95x0: switch to using devm_regulator_get_enable()
pinctrl: cy8c95x0: Use 2-argument strscpy()
dt-bindings: pinctrl: sx150xq: allow gpio line naming
pinctrl: single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: correct typo of description for cv1800
pinctrl: qcom: spmi-mpp: Add PM8937 compatible
dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible
pinctrl: qcom-pmic-gpio: add support for PM8937
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
pinctrl: Use of_property_present() for non-boolean properties
...
This includes following Intel pinctrl changes for v6.13 merge window:
- Expose DSW community on Elkhart Lake.
- Elaborate in the code comment the pull bias settings.
Both have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=TQtH
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.13-2
This includes following Intel pinctrl changes for v6.13 merge window:
- Expose DSW community on Elkhart Lake.
- Elaborate in the code comment the pull bias settings.
Both have been in linux-next with no reported issues.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Hardware has a DSW (Deep Sleep Well) community that might be exposed
by some BIOSes. Add support for it in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add a human readable decoder for pull bias values in the comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/pinctrl to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/20241007205803.444994-8-u.kleine-koenig@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Intel Panther Lake is supported by the generic platform driver,
so add it to the list of supported in Kconfig.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Substitute the comma with a semicolon in the `ncommunities` assignment
for better readability and consistency with common C coding style.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The device_for_each_child_node() loop requires calls to
fwnode_handle_put() upon early returns to decrement the refcount of
the child node and avoid leaking memory if that error path is triggered.
There is one early returns within that loop in
intel_platform_pinctrl_prepare_community(), but fwnode_handle_put() is
missing.
Instead of adding the missing call, the scoped version of the loop can
be used to simplify the code and avoid mistakes in the future if new
early returns are added, as the child node is only used for parsing, and
it is never assigned.
Cc: stable@vger.kernel.org
Fixes: c5860e4a27 ("pinctrl: intel: Add a generic Intel pin control platform driver")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* Enable High Impedance pin configuration support for Intel pin control
* Miscellaneous small improvements here and there
The following is an automated git shortlog grouped by driver:
baytrail:
- Drop duplicate return statement
intel:
- Constify struct intel_pinctrl parameter
- Inline intel_gpio_community_irq_handler()
- Introduce for_each_intel_gpio_group() helper et al.
- Constify intel_get_community() returned object
- Implement high impedance support
- Add __intel_gpio_get_direction() helper
- Refactor __intel_gpio_set_direction() to be more useful
- Move debounce validation out of the lock
-----BEGIN PGP SIGNATURE-----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=Z/p4
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.12-1
* Enable High Impedance pin configuration support for Intel pin control
* Miscellaneous small improvements here and there
The following is an automated git shortlog grouped by driver:
baytrail:
- Drop duplicate return statement
intel:
- Constify struct intel_pinctrl parameter
- Inline intel_gpio_community_irq_handler()
- Introduce for_each_intel_gpio_group() helper et al.
- Constify intel_get_community() returned object
- Implement high impedance support
- Add __intel_gpio_get_direction() helper
- Refactor __intel_gpio_set_direction() to be more useful
- Move debounce validation out of the lock
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are a few functions that do not and should not change
the state of the pin control object. Constify the respective
parameter.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
No need to repeat 'return ret;' inside and outside conditional.
Just use one outside conditional for both cases.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
