Add clock and reset identifiers for the Video Input Interface.
These identifiers support two instances: VIIF0 and VIIF1.
Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Remove the definitions of number of clocks from bindings because they
prevent adding new clocks. Since the previous patch removed all refereces
within the driver, they can now be deleted.
The same for resets and plls.
Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add clock and reset ID defines for rv1126b.
Also add documentation for the rv1126b CRU core.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251111025738.869847-3-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The router link clock branches also feature some reset logic, which is
required to properly power sequence the hardware for DP tunneling over
USB4.
Describe these missing resets.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-topic-usb4_x1e_dispcc-v1-1-14c68d842c71@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add compatible string for SM8750 video clock controller and the bindings
for SM8750 Qualcomm SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-4-049882a70c9f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add definition for display subsystem reset control, so display
driver can reset display controller properly, clearing any
configuration left there by bootloader. Since 6.17 after
PM domains rework it became necessary for display to function.
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Cc: stable@vger.kernel.org # 6.17
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20251116-sdm660-mdss-reset-v2-1-6219bec0a97f@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add documentation for i.MX8ULP's SIM LPAV module.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Link: https://lore.kernel.org/r/20251104120301.913-3-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add the core clock used by the GPU on the Renesas R-Car V3U
(R8A779A0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251106211604.2766465-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
CLK_NR_CLKS has always only be used on the driver side to calculate array
sizes should never have been part of the clock-binding.
Let's drop it, since the kernel code no longer uses it either and nothing
else has ever used it.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251103234032.413563-3-heiko@sntech.de
The Trusted Firmware on RK3568 exposes 3 clocks via the SCMI clock
interface. Add descriptive IDs for them.
The clock ids are used in both the older vendor-binary TF-A, as well
as the recently merged upstream SCMI clock implementation.
Link: https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/31265
Reviewed-by: Diederik de Haas <diederik@cknow-tech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251103234926.416137-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add device tree bindings for the global clock controller on Qualcomm
Kaanapali platform.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251030-gcc_kaanapali-v2-v2-3-a774a587af6f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
NSS clock controller provides the clocks and resets to the networking
blocks such as PPE (Packet Process Engine) and UNIPHY (PCS) on IPQ5424
devices.
Add support for the compatible string "qcom,ipq5424-nsscc" based on the
existing IPQ9574 NSS clock controller Device Tree binding. Additionally,
update the clock names for PPE and NSS for newer SoC additions like
IPQ5424 to use generic and reusable identifiers "nss" and "ppe" without
the clock rate suffix.
Also add master/slave ids for IPQ5424 networking interfaces, which is
used by nss-ipq5424 driver for providing interconnect services using
icc-clk framework.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-7-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The firmware exposes clocks that can be controlled via the
Alive Clock and Power Manager (ACPM) interface.
Make the ACPM node a clock provider by adding the mandatory
"#clock-cells" property, which allows devices to reference its
clock outputs.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20251010-acpm-clk-v6-1-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Some of the USB4 muxes, RCGs and resets were not initially described.
Add indices for them to allow extending the driver.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251003-topic-hamoa_gcc_usb4-v2-1-61d27a14ee65@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree clock binding definitions for CMU_MFC
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add device tree clock binding definitions for CMU_M2M
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
struct clk_ops::determine_rate() instead of the round_rate() one so that we can
remove the round_rate clk_op entirely. Brian has taken up that task which
nobody else has wanted to do for close to a decade. Thanks Brian! This is all
prerequisite work to get to the real task of improving the clk rate setting
process. Once we have determine_rate() used everywhere, we'll be able to do
things like chain the rate request structs in linked lists to order the rate
setting operations or add more parameters without having to change every clk
driver in existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad this is
getting done.
Beyond this change we also have a tweak to the clk_lookup() function in the
core framework to use hashing on the clk name instead of a clk tree walk with
string comparisons. We _still_ rely on the clk name to be unique, because
historically we've used globally unique strings to describe the clk tree
topology. This tree walk becomes increasingly slow as more clks are added to
the system. Searching from the roots for a duplicate is simple but pretty dumb
and it wastes boot time so we're using a hash table as an improvement. Ideally
we wouldn't rely on the strings to be unique at all, relegating them to simply
debug information, but that is future work that will likely require some sort
of Kconfig knob indicating strings aren't used for topology description.
Outside of the core framework changes we have the usual new SoC support and
fixes to clk drivers for things that were discovered once the clks were used by
consumer drivers. Nothing in particular is jumping out at me in the "misc"
pile, except maybe the Amlogic driver that has gone through a refactoring. That
series got a fix from testing in -next though so it seems likely that things
have been getting good test coverage for a couple weeks already.
-----BEGIN PGP SIGNATURE-----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=fjY4
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's a bunch of patches here across drivers/clk/ to migrate drivers
to use struct clk_ops::determine_rate() instead of the round_rate()
one so that we can remove the round_rate clk_op entirely. Brian has
taken up that task which nobody else has wanted to do for close to a
decade. Thanks Brian!
This is all prerequisite work to get to the real task of improving the
clk rate setting process. Once we have determine_rate() used
everywhere, we'll be able to do things like chain the rate request
structs in linked lists to order the rate setting operations or add
more parameters without having to change every clk driver in
existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad
this is getting done.
Beyond this change we also have a tweak to the clk_lookup() function
in the core framework to use hashing on the clk name instead of a clk
tree walk with string comparisons. We _still_ rely on the clk name to
be unique, because historically we've used globally unique strings to
describe the clk tree topology. This tree walk becomes increasingly
slow as more clks are added to the system. Searching from the roots
for a duplicate is simple but pretty dumb and it wastes boot time so
we're using a hash table as an improvement. Ideally we wouldn't rely
on the strings to be unique at all, relegating them to simply debug
information, but that is future work that will likely require some
sort of Kconfig knob indicating strings aren't used for topology
description.
Outside of the core framework changes we have the usual new SoC
support and fixes to clk drivers for things that were discovered once
the clks were used by consumer drivers. Nothing in particular is
jumping out at me in the "misc" pile, except maybe the Amlogic driver
that has gone through a refactoring. That series got a fix from
testing in -next though so it seems likely that things have been
getting good test coverage for a couple weeks already"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
reset: aspeed: register AST2700 reset auxiliary bus device
dt-bindings: clock: ast2700: modify soc0/1 clock define
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
...
- Speed up clk_core_lookup() by using a hashtable
* clk-microchip:
ARM: at91: remove default values for PMC_PLL_ACR
clk: at91: add ACR in all PLL settings
clk: at91: sam9x7: Add peripheral clock id for pmecc
clk: at91: clk-master: Add check for divide by 3
clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register
ARM: at91: pm: save and restore ACR during PLL disable/enable
* clk-lookup:
clk: Use hashtable for global clk lookups
clk: Sort include statements
* clk-st:
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
One commit for the dt bindings was missing from the dt branch, this
one is already pending in the clk tree that contains the corresponding
device driver.
-----BEGIN PGP SIGNATURE-----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=DlPR
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC build fix from Arnd Bergmann:
"One commit for the dt bindings was missing from the dt branch, this
one is already pending in the clk tree that contains the corresponding
device driver"
* tag 'soc-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
dt-bindings: clock: Add ARTPEC-8 clock controller
Lots of platform specific updates for Qualcomm SoCs, including a
new TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with the
M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed, Broadcom,
Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0.
-----BEGIN PGP SIGNATURE-----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=mcZR
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
This tag contains two DT binding header changes that are shared with
the clk tree.
In this cycle we gained support for the MCU PRCM clock and reset
controller on the A523/A527/T527 family of SoCs, the NPU which is a
Vivante GC9000 IP block, and the NPU clock that was missing. The other
PRCM clock controller gained default bus clock rate settings. These
were not configured in the upstream U-boot bootloader, leading to them
running at slower rates. The assigned rates are from the user manual.
There is also a new board, the NetCube Systems Nagami SoM and two of
its carrier boards.
The A523 family development boards now have their internal RTC clocks
configured correctly, so that the RTC does not drift wildly. The missing
functions for the AXP717 on these boards are added. Missing reset GPIOs
and delays for Ethernet PHYs are added. Last, the Cubie A5E now has its
LEDs described and usable.
An overlay for the Orange Pi Zero interface (addon) board was added.
This can be used with the Orange Pi Zero and Zero Plus 2. Default audio
routing for these two boards (to be used with the addon) were added to
complement the overlay.
-----BEGIN PGP SIGNATURE-----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=3psf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7iP3
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner Device Tree changes for 6.18
This tag contains two DT binding header changes that are shared with
the clk tree.
In this cycle we gained support for the MCU PRCM clock and reset
controller on the A523/A527/T527 family of SoCs, the NPU which is a
Vivante GC9000 IP block, and the NPU clock that was missing. The other
PRCM clock controller gained default bus clock rate settings. These
were not configured in the upstream U-boot bootloader, leading to them
running at slower rates. The assigned rates are from the user manual.
There is also a new board, the NetCube Systems Nagami SoM and two of
its carrier boards.
The A523 family development boards now have their internal RTC clocks
configured correctly, so that the RTC does not drift wildly. The missing
functions for the AXP717 on these boards are added. Missing reset GPIOs
and delays for Ethernet PHYs are added. Last, the Cubie A5E now has its
LEDs described and usable.
An overlay for the Orange Pi Zero interface (addon) board was added.
This can be used with the Orange Pi Zero and Zero Plus 2. Default audio
routing for these two boards (to be used with the addon) were added to
complement the overlay.
* tag 'sunxi-dt-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: sun55i: Complete AXP717A sub-functions
arm64: dts: allwinner: t527: orangepi-4a: hook up external 32k crystal
arm64: dts: allwinner: t527: avaota-a1: hook up external 32k crystal
arm64: dts: allwinner: a527: cubie-a5e: Drop external 32.768 KHz crystal
arm64: dts: sun55i: a523: Assign standard clock rates to PRCM bus clocks
ARM: dts: sunxi: add support for NetCube Systems Nagami Keypad Carrier
ARM: dts: sunxi: add support for NetCube Systems Nagami Basic Carrier
ARM: dts: sunxi: add support for NetCube Systems Nagami SoM
riscv: dts: allwinner: d1s-t113: Add pinctrl's required by NetCube Systems Nagami SoM
dt-bindings: arm: sunxi: Add NetCube Systems Nagami SoM and carrier board bindings
ARM: dts: allwinner: Add Orange Pi Zero Interface Board overlay
ARM: dts: allwinner: orangepi-zero-plus2: Add default audio routing
ARM: dts: allwinner: orangepi-zero: Add default audio routing
arm64: dts: allwinner: a523: Add NPU device node
arm64: dts: allwinner: a523: Add MCU PRCM CCU node
dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller
dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock
arm64: dts: allwinner: t527: avaota-a1: Add ethernet PHY reset setting
arm64: dts: allwinner: a527: cubie-a5e: Add ethernet PHY reset setting
arm64: dts: allwinner: a527: cubie-a5e: Add LEDs
Link: https://lore.kernel.org/r/aMrtuZg8HlR--TAt@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document the clock controller shipped in Loongson-2K0300 SoC, which
generates various clock signals for SoC peripherals. Differing from
previous generations of SoCs, LS2K0300 requires a 120MHz external clock
input.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Adds clock and reset binding entries for STM32MP21 SoC family.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Introduce binding documentation for system clocks, functional clocks,
and PEXTP0/1 and UFS reset controllers on MediaTek MT8196.
This binding also includes a handle to the hardware voter, a
fixed-function MCU designed to aggregate votes from the application
processor and other remote processors to manage clocks and power
domains.
The HWV on MT8196/MT6991 is incomplete and requires software to manually
enable power supplies, parent clocks, and FENC, as well as write to both
the HWV MMIO and the controller registers.
Because of these constraints, the HWV cannot be modeled using generic
clock, power domain, or interconnect APIs. Instead, a custom phandle is
exceptionally used to provide direct, syscon-like register access to
drivers.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Co-developed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the missing AFE Merge Interface clock to MT7622 to make use of
it in the audio subsystem.
While at it, also remove the useless CLK_AUDIO_NR_CLK definition.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Previously, the K1 clock driver did not include the parent clocks of
the I2S sysclk.
Introduce pre-clock to fix I2S clock.
Otherwise, the I2S clock may not work as expected.
This patch adds their definitions to allow proper registration
in the driver and usage in the device tree.
Fixes: 1b72c59db0 ("clk: spacemit: Add clock support for SpacemiT K1 SoC")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Support for the Tegra264 generation of I2C is documented as well as some
older Tegra devices, such as the Xiaomi Mi Pad and the ASUS 101 devices.
Contained are also some additions to existing bindings for Tegra114 and
a fix for the power supply feeding VI/CSI.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmjGXQgACgkQ3SOs138+
s6GLdBAApTnTZi8zBPYkQF2/j2Ua/qkH93E1Oos9Ng8PgP0n/ObS2I/qqLABsnur
Q7EDesxKsDMI9VsLEazl2Pp0HCIPoqCRnlSWVkCp+G3JJ+RMeP+fFtEycTqZiiu6
eIx9iQbAujXCdsIzYCx6cq21yyWoBnqTD/pkB7jqA1zpQazgnCHxjBJbCfC+wecY
6B/ygsr6kaKJwH2ISPBGm7tVuunQZR3ZJEWfo//LVqPcG26xEYmyrvvE7k3UvGIP
Njntp1x4trFTf6WcGalNyvcVn2dQWxc54gBQbi5oL4TfBfEO3Eb+tRcaIQa4zGyu
RKTn3ZwvO9AnqBQx6Jnwyh9lu3LJPIp/BaNkztz9JXTPl64wo2OQ4nvqzwvCr8ws
fvrOFfgolKBarxjupfiKFITcB1pAgtN0WeHg64pd+D7JxJ4T6A3818VswQLsltrO
1JyPYVLvzsaHjOPmLckXiv42Y3FX7um6x0nu8ZgNEEWCIpbedc97gR+cFv7TkFue
MENuesWqyGZ+5iI2zXDe/V6hQAcHAZvJgxEvnJ0YDbcK07hKlEKyen91Q6OgIG5D
lOfj3M0IxnFjKgKnChjVfGAY8rgq0Dt04hWdpsR8G9cmle7tWvSQfTRoDrCbf/Nv
VP2mB+A3D9PNZHO5ooqIAXCUIbmRnAVmrOUHUC0EFWYa06ZBHBM=
=w8Ms
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmjIFn0ACgkQmmx57+YA
GNlyDA/9H3YR2fM91GmzvLLJMsmb19g/NKlg7NS0DkCtmd6k41xK7Rs0IZOjZbqi
rwI09Ns55B1TP1YNHzLEE00FOo5VXW8LLxjaGqi9IKHZyhlArXigo6SC7Gtzw343
S/plUjZRXJh11z0KHs+BSuimmGrmBh7esd1pRKj5SRE3GmISY0WzC0OUXp2mcVnM
ZqXA1VgnNcDiAQ1IcTK3s2cvGmllKA1bOgXM1SxJiiFyvzcNpadpFXypla4YWUNa
oMh9Ey/H5gQ6SZ/ije5b85UgAN/G09O3LoPaVeP3KzerPGhjo//la0/YglMdmT0m
3IU0SChnlRth+xgKME3Gg7cCyaA5I5o91imtr4XdQVo8AZoJa5XrII3RgzGG5obb
48Qe801koOTxQHfmOQ1GRO6+L4PZLQrNRQPsTYHdV6vpRjmoU9h4foox7ELpKT8s
7TWNhsfkQu+jkB99iN0F1zQmIRJGAhovOAG6RRD+W3M5tEUonH/7e0cBJBu55vUk
eQMWxs04aIuxHukZ45WgjPcGnOTPBFsDqARLR5t3jYgC8vaOCkGZNaPLLbIyOEJB
1FhuQIJwhwHgVCS4ejDa6vt57WXyIXq7YNORBnabaHrJrsdrJ4fEAZo33i2mKrl1
M32HOMB1YbfP5Mf5KNWRs6g5wn9LOqzbSEBGh52y3mYfDvWgHrw=
=TNku
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.18-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.18-rc1
Support for the Tegra264 generation of I2C is documented as well as some
older Tegra devices, such as the Xiaomi Mi Pad and the ASUS 101 devices.
Contained are also some additions to existing bindings for Tegra114 and
a fix for the power supply feeding VI/CSI.
* tag 'tegra-for-6.18-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: Add ASUS TF101G and SL101
dt-bindings: reset: Add Tegra114 CAR header
dt-bindings: arm: tegra: Add Xiaomi Mi Pad (A0101)
dt-bindings: clock: tegra30: Add IDs for CSI pad clocks
dt-bindings: display: tegra: Move avdd-dsi-csi-supply from VI to CSI
dt-bindings: i2c: nvidia,tegra20-i2c: Document Tegra264 I2C
Link: https://lore.kernel.org/r/20250914063927.89981-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
