upstream <asm/intel-family.h> header for drivers to use.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=7sB6
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-02-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix a kprobes bug, plus add a new Intel model number to the upstream
<asm/intel-family.h> header for drivers to use"
* tag 'x86-urgent-2023-02-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add Lunar Lake M
x86/kprobes: Fix 1 byte conditional jump target
All the changes this time are minor devicetree corrections, the majority
being for 64-bit Rockchip SoC support. These are a couple of corrections
for properties that are in violation of the binding, some that put the
machine into safer operating points for the eMMC and thermal settings,
and missing properties that prevented rk356x PCIe and ethernet from
working correctly.
The changes for amlogic and mediatek address incorrect properties that
were preventing the display support on MT8195 and the MMC support
on various Meson SoCs from working correctly.
The stihxxx-b2120 change fixes the GPIO polarity for the DVB tuner
to allow this to be used correctly after a futre driver change,
though it has no effect on older kernels.
-----BEGIN PGP SIGNATURE-----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=23z6
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"All the changes this time are minor devicetree corrections, the
majority being for 64-bit Rockchip SoC support. These are a couple of
corrections for properties that are in violation of the binding, some
that put the machine into safer operating points for the eMMC and
thermal settings, and missing properties that prevented rk356x PCIe
and ethernet from working correctly.
The changes for amlogic and mediatek address incorrect properties that
were preventing the display support on MT8195 and the MMC support on
various Meson SoCs from working correctly.
The stihxxx-b2120 change fixes the GPIO polarity for the DVB tuner to
allow this to be used correctly after a futre driver change, though it
has no effect on older kernels"
* tag 'soc-fixes-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: meson-gx: Make mmc host controller interrupts level-sensitive
arm64: dts: meson-g12-common: Make mmc host controller interrupts level-sensitive
arm64: dts: meson-axg: Make mmc host controller interrupts level-sensitive
ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 port
arm64: dts: mediatek: mt8195: Fix vdosys* compatible strings
arm64: dts: rockchip: align rk3399 DMC OPP table with bindings
arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a
arm64: dts: rockchip: fix probe of analog sound card on rock-3a
arm64: dts: rockchip: add missing #interrupt-cells to rk356x pcie2x1
arm64: dts: rockchip: fix input enable pinconf on rk3399
ARM: dts: rockchip: add power-domains property to dp node on rk3288
arm64: dts: rockchip: add io domain setting to rk3566-box-demo
arm64: dts: rockchip: remove unsupported property from sdmmc2 for rock-3a
arm64: dts: rockchip: drop unused LED mode property from rk3328-roc-cc
arm64: dts: rockchip: reduce thermal limits on rk3399-pinephone-pro
arm64: dts: rockchip: use correct reset names for rk3399 crypto nodes
* A fix to avoid partial TLB fences for huge pages, which are disallowed
by the ISA.
* A fix to to avoid missing a frame when dumping stacks.
* A fix to avoid misaligned accesses (and possibly overflows) in
kprobes.
* A fix for a race condition in tracking page dirtiness.
-----BEGIN PGP SIGNATURE-----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=hyiU
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"This is a little bigger that I'd hope for this late in the cycle, but
they're all pretty concrete fixes and the only one that's bigger than
a few lines is pmdp_collapse_flush() (which is almost all
boilerplate/comment). It's also all bug fixes for issues that have
been around for a while.
So I think it's not all that scary, just bad timing.
- avoid partial TLB fences for huge pages, which are disallowed by
the ISA
- avoid missing a frame when dumping stacks
- avoid misaligned accesses (and possibly overflows) in kprobes
- fix a race condition in tracking page dirtiness"
* tag 'riscv-for-linus-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup race condition on PG_dcache_clean in flush_icache_pte
riscv: kprobe: Fixup misaligned load text
riscv: stacktrace: Fix missing the first frame
riscv: mm: Implement pmdp_collapse_flush for THP
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
[0] https://www.spinics.net/lists/linux-mmc/msg73991.html
Fixes: ef8d2ffedf ("ARM64: dts: meson-gxbb: add MMC support")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/76e042e0-a610-5ed5-209f-c4d7f879df44@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
[0] https://www.spinics.net/lists/linux-mmc/msg73991.html
Fixes: 4759fd87b9 ("arm64: dts: meson: g12a: add mmc nodes")
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/27d89baa-b8fa-baca-541b-ef17a97cde3c@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
[0] https://www.spinics.net/lists/linux-mmc/msg73991.html
Fixes: 221cf34bac ("ARM64: dts: meson-axg: enable the eMMC controller")
Reported-by: Peter Suti <peter.suti@streamunlimited.com>
Tested-by: Vyacheslav Bocharov <adeep@lexina.in>
Tested-by: Peter Suti <peter.suti@streamunlimited.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/c00655d3-02f8-6f5f-4239-ca2412420cad@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
In commit 588a513d34 ("arm64: Fix race condition on PG_dcache_clean
in __sync_icache_dcache()"), we found RISC-V has the same issue as the
previous arm64. The previous implementation didn't guarantee the correct
sequence of operations, which means flush_icache_all() hasn't been
called when the PG_dcache_clean was set. That would cause a risk of page
synchronization.
Fixes: 08f051eda3 ("RISC-V: Flush I$ when making a dirty page executable")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230127035306.1819561-1-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Intel confirmed the existence of this CPU in Q4'2022
earnings presentation.
Add the CPU model number.
[ dhansen: Merging these as soon as possible makes it easier
on all the folks developing model-specific features. ]
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20230208172340.158548-1-tony.luck%40intel.com
Commit 3bc753c06d ("kbuild: treat char as always unsigned") broke
kprobes. Setting a probe-point on 1 byte conditional jump can cause the
kernel to crash when the (signed) relative jump offset gets treated as
unsigned.
Fix by replacing the unsigned 'immediate.bytes' (plus a cast) with the
signed 'immediate.value' when assigning to the relative jump offset.
[ dhansen: clarified changelog ]
Fixes: 3bc753c06d ("kbuild: treat char as always unsigned")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20230208071708.4048-1-namit%40vmware.com
The RFI and STF security mitigation options can flip the
interrupt_exit_not_reentrant static branch condition concurrently with
the interrupt exit code which tests that branch.
Interrupt exit tests this condition to set MSR[EE|RI] for exit, then
again in the case a soft-masked interrupt is found pending, to recover
the MSR so the interrupt can be replayed before attempting to exit
again. If the condition changes between these two tests, the MSR and irq
soft-mask state will become corrupted, leading to warnings and possible
crashes. For example, if the branch is initially true then false,
MSR[EE] will be 0 but PACA_IRQ_HARD_DIS clear and EE may not get
enabled, leading to warnings in irq_64.c.
Fixes: 13799748b9 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206042240.92103-1-npiggin@gmail.com
kexec (PPC64) code calls memory_hotplug_max(). Add the header
declaration for it from <asm/mmzone.h>. Using <linux/mmzone.h> does not
work since the #include for <asm/mmzone.h> depends on CONFIG_NUMA=y,
which is not always set.
Fixes this build error/warning:
arch/powerpc/kexec/file_load_64.c: In function 'kexec_extra_fdt_size_ppc64':
arch/powerpc/kexec/file_load_64.c:993:33: error: implicit declaration of function 'memory_hotplug_max'
993 | usm_entries = ((memory_hotplug_max() / drmem_lmb_size()) +
| ^~~~~~~~~~~~~~~~~~
Fixes: fc546faa55 ("powerpc/kexec_file: Count hot-pluggable memory in FDT estimate")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230204172206.7662-1-rdunlap@infradead.org
a #VC exception in SEV-ES guests at the wrong place in the NMI handling path
-----BEGIN PGP SIGNATURE-----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=/0kD
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Prevent the compiler from reordering accesses to debug regs which
could cause a #VC exception in SEV-ES guests at the wrong place in
the NMI handling path
* tag 'x86_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/debug: Fix stack recursion caused by wrongly ordered DR7 accesses
- Fix a few objtool warnings since we recently enabled objtool.
- Fix a deadlock with the hash MMU vs perf record.
- Fix perf profiling of asynchronous interrupt handlers.
- Revert the IMC PMU nest_init_lock to being a mutex.
- Two commits fixing problems with the kexec_file FDT size estimation.
- Two commits fixing problems with strict RWX vs kernels running at non-zero.
- Reconnect tlb_flush() to hash__tlb_flush()
Thanks to: Kajol Jain, Nicholas Piggin, Sachin Sant Sathvika Vasireddy, Sourabh Jain.
-----BEGIN PGP SIGNATURE-----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=mSJj
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"It's a bit of a big batch for rc6, but just because I didn't send any
fixes the last week or two while I was on vacation, next week should
be quieter:
- Fix a few objtool warnings since we recently enabled objtool.
- Fix a deadlock with the hash MMU vs perf record.
- Fix perf profiling of asynchronous interrupt handlers.
- Revert the IMC PMU nest_init_lock to being a mutex.
- Two commits fixing problems with the kexec_file FDT size
estimation.
- Two commits fixing problems with strict RWX vs kernels running at
non-zero.
- Reconnect tlb_flush() to hash__tlb_flush()
Thanks to Kajol Jain, Nicholas Piggin, Sachin Sant Sathvika Vasireddy,
and Sourabh Jain"
* tag 'powerpc-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush()
powerpc/kexec_file: Count hot-pluggable memory in FDT estimate
powerpc/64s/radix: Fix RWX mapping with relocated kernel
powerpc/64s/radix: Fix crash with unaligned relocated kernel
powerpc/kexec_file: Fix division by zero in extra size estimation
powerpc/imc-pmu: Revert nest_init_lock to being a mutex
powerpc/64: Fix perf profiling asynchronous interrupt handlers
powerpc/64s: Fix local irq disable when PMIs are disabled
powerpc/kvm: Fix unannotated intra-function call warning
powerpc/85xx: Fix unannotated intra-function call warning
- Yet another fix for non-CPU accesses to the memory backing
the VGICv3 subsystem
- A set of fixes for the setlftest checking for the S1PTW
behaviour after the fix that went in ealier in the cycle
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPeZxwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMh7Af/W3CX09KfdKYidbnF4Vx5rkaBaseP
ox77Qco8j6DcC3fazs5TZtiN7pOSf6488VmbS43HkfZUoNAWmXn8tvwvX+a4pNE9
yYjXQYRzOjyShPJIsBehlocn3F5G1KvZ8rVl5deVjBRtY5Vd1NzliFPL/EVZiVBk
l6IHi0rawUTaSGJ9ZLBglQ9wEuAGv1R0SkjhwlXQ6AbupKB1n3tvgOSlKWbwP9fZ
qJN0mOy38lp2YNRtsoZPiyf9AxGXd9XX6twQ4bhDr9h540HrbzzFh8mWu536X7mg
dhWwggHidzN8Jzih2TnPByqorGIiJ4ab1iU6udp2X0oiaacfoIFzh8vrlA==
=7/HY
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Yet another fix for non-CPU accesses to the memory backing the
VGICv3 subsystem
- A set of fixes for the setlftest checking for the S1PTW behaviour
after the fix that went in ealier in the cycle"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: aarch64: Test read-only PT memory regions
KVM: selftests: aarch64: Fix check of dirty log PT write
KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWs
KVM: selftests: aarch64: Relax userfaultfd read vs. write checks
KVM: arm64: Allow no running vcpu on saving vgic3 pending table
KVM: arm64: Allow no running vcpu on restoring vgic3 LPI pending status
KVM: arm64: Add helper vgic_write_guest_lock()
- Fix PTRACE_GETREGS/PTRACE_SETREGS for 32-bit userspace on 64-bit kernel
- pdc_iodc_print() dropped chars for newline in strings
- Drop constants in favour of PRIV_USER
- use safer strscpy() function in pdc_stable driver
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCY95sNgAKCRD3ErUQojoP
X47DAP9BSSF5dcfBChFaPdvHMxeHGknWQTX4pw/VzfBTRtLf3wEA9KI/+RCNxTPJ
W90rn0wtHXvofejPB5IOTX10ulENZAE=
=RuNp
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Fix PTRACE_GETREGS/PTRACE_SETREGS for 32-bit userspace on a 64-bit
kernel
- pdc_iodc_print() dropped chars for newline in strings
- Drop constants in favour of PRIV_USER
- use safer strscpy() function in pdc_stable driver
* tag 'parisc-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case
parisc: Replace hardcoded value with PRIV_USER constant in ptrace.c
parisc: Fix return code of pdc_iodc_print()
parisc: pdc_stable: use strscpy() to instead of strncpy()
- Yet another fix for non-CPU accesses to the memory backing
the VGICv3 subsystem
- A set of fixes for the setlftest checking for the S1PTW
behaviour after the fix that went in ealier in the cycle
-----BEGIN PGP SIGNATURE-----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=2l/n
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.2, take #3
- Yet another fix for non-CPU accesses to the memory backing
the VGICv3 subsystem
- A set of fixes for the setlftest checking for the S1PTW
behaviour after the fix that went in ealier in the cycle
* A build fix to avoid static branches in cpu_relax(), which greatly
inflates the jump tables and breaks at least
CONFIG_CC_OPTIMIZE_FOR_SIZE=y.
* A fix for a kernel panic when probing impossible instruction
positions.
* A fix to disable unwind tables, which are enabled by default for
GCC-13 and result in unhandled relocations in modules.
-----BEGIN PGP SIGNATURE-----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=tZzK
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A build fix to avoid static branches in cpu_relax(), which greatly
inflates the jump tables and breaks at least
CONFIG_CC_OPTIMIZE_FOR_SIZE=y.
- A fix for a kernel panic when probing impossible instruction
positions.
- A fix to disable unwind tables, which are enabled by default for
GCC-13 and result in unhandled relocations in modules.
* tag 'riscv-for-linus-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: disable generation of unwind tables
riscv: kprobe: Fixup kernel panic when probing an illegal position
riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY9x+swAKCRDdBJ7gKXxA
joPwAP95XqB7gzy2l1Mc++Ta7Ih0fS34Pj1vTAxwsRQnqzr6rwD/QOt3YU9KgXpy
D7Fp8NnaQZq6m5o8cvV5+fBqA3uarAM=
=IIB8
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"25 hotfixes, mainly for MM. 13 are cc:stable"
* tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath()
Kconfig.debug: fix the help description in SCHED_DEBUG
mm/swapfile: add cond_resched() in get_swap_pages()
mm: use stack_depot_early_init for kmemleak
Squashfs: fix handling and sanity checking of xattr_ids count
sh: define RUNTIME_DISCARD_EXIT
highmem: round down the address passed to kunmap_flush_on_unmap()
migrate: hugetlb: check for hugetlb shared PMD in node migration
mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps
mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups
Revert "mm: kmemleak: alloc gray object for reserved region with direct map"
freevxfs: Kconfig: fix spelling
maple_tree: should get pivots boundary by type
.mailmap: update e-mail address for Eugen Hristev
mm, mremap: fix mremap() expanding for vma's with vm_ops->close()
squashfs: harden sanity check in squashfs_read_xattr_id_table
ia64: fix build error due to switch case label appearing next to declaration
mm: multi-gen LRU: fix crash during cgroup migration
Revert "mm: add nodes= arg to memory.reclaim"
zsmalloc: fix a race with deferred_handles storing
...
According to c8sectpfe driver code we first drive reset line low and
then high to reset the port, therefore the reset line is supposed to
be annotated as "active low". This will be important when we convert
the driver to gpiod API.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
When vdosys1 was initially added, it was incorrectly assumed to be
compatible with vdosys0, and thus both had the same mt8195-mmsys
compatible attached.
This has since been corrected in commit b237efd47d ("dt-bindings:
arm: mediatek: mmsys: change compatible for MT8195") and commit
82219cfbef ("dt-bindings: arm: mediatek: mmsys: add vdosys1 compatible
for MT8195"). The device tree needs to be fixed as well, otherwise
the vdosys1 block fails to work, and causes its dependent power domain
controller to not work either.
Change the compatible string of vdosys1 to "mediatek,mt8195-vdosys1".
While at it, also add the new "mediatek,mt8195-vdosys0" compatible to
vdosys0.
Fixes: 6aa5b46d17 ("arm64: dts: mt8195: Add vdosys and vppsys clock nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230202104014.2931517-1-wenst@chromium.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most notably may be the adaption of lower thermal limits for the pinephone
pro, where the original hiher ones could result in (possibly permanent)
display issues.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmPapWIQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVu4CACD6VNbu005k/Ot8wN3jIzJPicgz9Z6QfSM
xH0OBYQ037O833wGJYKosQT+azQaUrzMVRrO2hPhdAKR8OXbD4m5k7EySQzNgsNT
bG1ONkBD+ZLT04K3aYL+lg/ty0UE88/GeVMG/CP7tuCNkvvel5Gqt9WLDeNOC5Md
oPrkGP+SGT97A6QSkjTTwphlaze7zBBMPVPR2buJRaKrRFrwoTERE7zglZ/9ZFaJ
gB5o+y1fjTUKtD9fFZ0ch7yHHx3T5GIh1Lzxm+wpfMwsFOwl9k4PGN0dS/pu93gm
zYY535P/gUY8gzsb8rde+kFVEvAF4PIJBMjVkKfHNGfDG6YSWO+T
=qX0n
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=5IlC
-----END PGP SIGNATURE-----
Merge tag 'v6.2-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fixes to adapt to correct binding behaviour and fixes for devices on some boards
Most notably may be the adaption of lower thermal limits for the pinephone
pro, where the original hiher ones could result in (possibly permanent)
display issues.
* tag 'v6.2-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: align rk3399 DMC OPP table with bindings
arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a
arm64: dts: rockchip: fix probe of analog sound card on rock-3a
arm64: dts: rockchip: add missing #interrupt-cells to rk356x pcie2x1
arm64: dts: rockchip: fix input enable pinconf on rk3399
ARM: dts: rockchip: add power-domains property to dp node on rk3288
arm64: dts: rockchip: add io domain setting to rk3566-box-demo
arm64: dts: rockchip: remove unsupported property from sdmmc2 for rock-3a
arm64: dts: rockchip: drop unused LED mode property from rk3328-roc-cc
arm64: dts: rockchip: reduce thermal limits on rk3399-pinephone-pro
arm64: dts: rockchip: use correct reset names for rk3399 crypto nodes
Link: https://lore.kernel.org/r/3514663.mvXUDI8C0e@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When running kfence_test, I found some testcases failed like this:
# test_out_of_bounds_read: EXPECTATION FAILED at mm/kfence/kfence_test.c:346
Expected report_matches(&expect) to be true, but is false
not ok 1 - test_out_of_bounds_read
The corresponding call-trace is:
BUG: KFENCE: out-of-bounds read in kunit_try_run_case+0x38/0x84
Out-of-bounds read at 0x(____ptrval____) (32B right of kfence-#10):
kunit_try_run_case+0x38/0x84
kunit_generic_run_threadfn_adapter+0x12/0x1e
kthread+0xc8/0xde
ret_from_exception+0x0/0xc
The kfence_test using the first frame of call trace to check whether the
testcase is succeed or not. Commit 6a00ef4493 ("riscv: eliminate
unreliable __builtin_frame_address(1)") skip first frame for all
case, which results the kfence_test failed. Indeed, we only need to skip
the first frame for case (task==NULL || task==current).
With this patch, the call-trace will be:
BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0x88/0x19e
Out-of-bounds read at 0x(____ptrval____) (1B left of kfence-#7):
test_out_of_bounds_read+0x88/0x19e
kunit_try_run_case+0x38/0x84
kunit_generic_run_threadfn_adapter+0x12/0x1e
kthread+0xc8/0xde
ret_from_exception+0x0/0xc
Fixes: 6a00ef4493 ("riscv: eliminate unreliable __builtin_frame_address(1)")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221207025038.1022045-1-liushixin2@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The majority of bugfixes is once more for the NXP i.MX platform,
addressing issue with i.MX8M (UART, watchdog and ethernet) as well as
imx8dxl power button and the USB modem on an imx7 board. The reason that
i.MX always shows up here is obviously not that they are more buggy than
the others, but they have the most boards and are good about getting
fixes in quickly.
The other DT fixes are for the Nuvoton wpcm450 flash controller and
the i2c mux on an ASpeed board.
Lastly, there are updates to the MAINTAINERS entries for Mediatek,
AMD/Seattle and NXP SoCs, as well as a lone code fix for error
handling in the allwinner "rsb" bus driver.
-----BEGIN PGP SIGNATURE-----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=xaPs
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The majority of bugfixes is once more for the NXP i.MX platform,
addressing issue with i.MX8M (UART, watchdog and ethernet) as well as
imx8dxl power button and the USB modem on an imx7 board.
The reason that i.MX always shows up here is obviously not that they
are more buggy than the others, but they have the most boards and are
good about getting fixes in quickly.
The other DT fixes are for the Nuvoton wpcm450 flash controller and
the i2c mux on an ASpeed board.
Lastly, there are updates to the MAINTAINERS entries for Mediatek,
AMD/Seattle and NXP SoCs, as well as a lone code fix for error
handling in the allwinner 'rsb' bus driver"
* tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: wpcm450: Add nuvoton,shm = <&shm> to FIU node
MAINTAINERS: Update entry for MediaTek SoC support
MAINTAINERS: amd: drop inactive Brijesh Singh
ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
arm64: dts: imx8mm-verdin: Do not power down eth-phy
MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
ARM: dts: aspeed: Fix pca9849 compatible
arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC
bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()
- With CONFIG_VMAP_STACK enabled it is not possible to load the s390
specific diag288_wdt watchdog module. Reason is that a pointer to a
string is passed to an inline assembly; this string however is located on
the stack, while the instruction within the inline assembly expects a
physicial address. Fix this by copying the string to a kmalloc'ed buffer.
- The diag288_wdt watchdog module does not indicate that it accesses memory
from an inline assembly, which it does. Add "memory" to the clobber list
to prevent the compiler from optimizing code incorrectly away.
- Pass size of the uncompressed kernel image to __decompress() call.
Otherwise the kernel image decompressor may corrupt/overwrite an
initrd. This was reported to happen on s390 after commit 2aa14b1ab2
("zstd: import usptream v1.5.2").
-----BEGIN PGP SIGNATURE-----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=+HFX
-----END PGP SIGNATURE-----
Merge tag 's390-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- With CONFIG_VMAP_STACK enabled it is not possible to load the s390
specific diag288_wdt watchdog module. The reason is that a pointer to
a string is passed to an inline assembly; this string however is
located on the stack, while the instruction within the inline
assembly expects a physicial address. Fix this by copying the string
to a kmalloc'ed buffer.
- The diag288_wdt watchdog module does not indicate that it accesses
memory from an inline assembly, which it does. Add "memory" to the
clobber list to prevent the compiler from optimizing code incorrectly
away.
- Pass size of the uncompressed kernel image to __decompress() call.
Otherwise the kernel image decompressor may corrupt/overwrite an
initrd. This was reported to happen on s390 after commit 2aa14b1ab2
("zstd: import usptream v1.5.2").
* tag 's390-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/decompressor: specify __decompress() buf len to avoid overflow
watchdog: diag288_wdt: fix __diag288() inline assembly
watchdog: diag288_wdt: do not use stack buffers for hardware data
Commit 41b7a347bf ("powerpc: Book3S 64-bit outline-only KASAN
support") added a select of ARCH_WANTS_NO_INSTR, because it also added
some uses of noinstr. However noinstr is always defined, regardless of
ARCH_WANTS_NO_INSTR, so there's no need to select it just for that.
As PeterZ says [1]:
Note that by selecting ARCH_WANTS_NO_INSTR you effectively state to
abide by its rules.
As of now the powerpc code does not abide by those rules, and trips some
new warnings added by Peter in linux-next.
So until the code can be fixed to avoid those warnings, disable
ARCH_WANTS_NO_INSTR.
Note that ARCH_WANTS_NO_INSTR is also used to gate building KCOV and
parts of KCSAN. However none of the noinstr annotations in powerpc were
added for KCOV or KCSAN, instead instrumentation is blocked at the file
level using KCOV_INSTRUMENT_foo.o := n.
[1]: https://lore.kernel.org/linuxppc-dev/Y9t6yoafrO5YqVgM@hirez.programming.kicks-ass.net
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When THP is enabled, 4K pages are collapsed into a single huge
page using the generic pmdp_collapse_flush() which will further
use flush_tlb_range() to shoot-down stale TLB entries. Unfortunately,
the generic pmdp_collapse_flush() only invalidates cached leaf PTEs
using address specific SFENCEs which results in repetitive (or
unpredictable) page faults on RISC-V implementations which cache
non-leaf PTEs.
Provide a RISC-V specific pmdp_collapse_flush() which ensures both
cached leaf and non-leaf PTEs are invalidated by using non-address
specific SFENCEs as recommended by the RISC-V privileged specification.
Fixes: e88b333142 ("riscv: mm: add THP support on 64-bit")
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Link: https://lore.kernel.org/r/20230130074815.1694055-1-mchitale@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
GCC 13 will enable -fasynchronous-unwind-tables by default on riscv. In
the kernel, we don't have any use for unwind tables yet, so disable them.
More importantly, the .eh_frame section brings relocations
(R_RISC_32_PCREL, R_RISCV_SET{6,8,16}, R_RISCV_SUB{6,8,16}) into modules
that we are not prepared to handle.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Link: https://lore.kernel.org/r/mvmzg9xybqu.fsf@suse.de
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The kernel would panic when probed for an illegal position. eg:
(CONFIG_RISCV_ISA_C=n)
echo 'p:hello kernel_clone+0x16 a0=%a0' >> kprobe_events
echo 1 > events/kprobes/hello/enable
cat trace
Kernel panic - not syncing: stack-protector: Kernel stack
is corrupted in: __do_sys_newfstatat+0xb8/0xb8
CPU: 0 PID: 111 Comm: sh Not tainted
6.2.0-rc1-00027-g2d398fe49a4d #490
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80007268>] dump_backtrace+0x38/0x48
[<ffffffff80c5e83c>] show_stack+0x50/0x68
[<ffffffff80c6da28>] dump_stack_lvl+0x60/0x84
[<ffffffff80c6da6c>] dump_stack+0x20/0x30
[<ffffffff80c5ecf4>] panic+0x160/0x374
[<ffffffff80c6db94>] generic_handle_arch_irq+0x0/0xa8
[<ffffffff802deeb0>] sys_newstat+0x0/0x30
[<ffffffff800158c0>] sys_clone+0x20/0x30
[<ffffffff800039e8>] ret_from_syscall+0x0/0x4
---[ end Kernel panic - not syncing: stack-protector:
Kernel stack is corrupted in: __do_sys_newfstatat+0xb8/0xb8 ]---
That is because the kprobe's ebreak instruction broke the kernel's
original code. The user should guarantee the correction of the probe
position, but it couldn't make the kernel panic.
This patch adds arch_check_kprobe in arch_prepare_kprobe to prevent an
illegal position (Such as the middle of an instruction).
Fixes: c22b0bcb1d ("riscv: Add kprobes supported")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230201040604.3390509-1-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit baf1ed24b2 ("powerpc/mm: Remove empty hash__ functions")
removed some empty hash MMU flushing routines, but got a bit overeager
and also removed the call to hash__tlb_flush() from tlb_flush().
In regular use this doesn't lead to any noticable breakage, which is a
little concerning. Presumably there are flushes happening via other
paths such as arch_leave_lazy_mmu_mode(), and/or a bit of luck.
Fix it by reinstating the call to hash__tlb_flush().
Fixes: baf1ed24b2 ("powerpc/mm: Remove empty hash__ functions")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230131111407.806770-1-mpe@ellerman.id.au
Prefer usage of the PRIV_USER constant over the hard-coded value to set
the lowest 2 bits for the userspace privilege.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 5.16+
The Flash Interface Unit (FIU) should have a reference to the Shared
Memory controller (SHM) so that flash access from the host (x86 computer
managed by the WPCM450 BMC) can be blocked during flash access by the
FIU driver.
Fixes: 38abcb0d68 ("ARM: dts: wpcm450: Add FIU SPI controller node")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20230129112611.1176517-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230201044158.962417-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is a single fix, but it conflicts with some recent features. I'm
merging it on top of the commit it fixes to ease backporting.
* b4-shazam-merge:
riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y
Link: https://lore.kernel.org/r/20220922060958.44203-1-samuel@sholland.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
commit 8eb060e101 ("arch/riscv: add Zihintpause support") broke
building with CONFIG_CC_OPTIMIZE_FOR_SIZE enabled (gcc 11.1.0):
CC arch/riscv/kernel/vdso/vgettimeofday.o
In file included from <command-line>:
./arch/riscv/include/asm/jump_label.h: In function 'cpu_relax':
././include/linux/compiler_types.h:285:33: warning: 'asm' operand 0 probably does not match constraints
285 | #define asm_volatile_goto(x...) asm goto(x)
| ^~~
./arch/riscv/include/asm/jump_label.h:41:9: note: in expansion of macro 'asm_volatile_goto'
41 | asm_volatile_goto(
| ^~~~~~~~~~~~~~~~~
././include/linux/compiler_types.h:285:33: error: impossible constraint in 'asm'
285 | #define asm_volatile_goto(x...) asm goto(x)
| ^~~
./arch/riscv/include/asm/jump_label.h:41:9: note: in expansion of macro 'asm_volatile_goto'
41 | asm_volatile_goto(
| ^~~~~~~~~~~~~~~~~
make[1]: *** [scripts/Makefile.build:249: arch/riscv/kernel/vdso/vgettimeofday.o] Error 1
make: *** [arch/riscv/Makefile:128: vdso_prepare] Error 2
Having a static branch in cpu_relax() is problematic because that
function is widely inlined, including in some quite complex functions
like in the VDSO. A quick measurement shows this static branch is
responsible by itself for around 40% of the jump table.
Drop the static branch, which ends up being the same number of
instructions anyway. If Zihintpause is supported, we trade the nop from
the static branch for a div. If Zihintpause is unsupported, we trade the
jump from the static branch for (what gets interpreted as) a nop.
Fixes: 8eb060e101 ("arch/riscv: add Zihintpause support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On Systems where online memory is lesser compared to max memory, the
kexec_file_load system call may fail to load the kdump kernel with the
below errors:
"Failed to update fdt with linux,drconf-usable-memory property"
"Error setting up usable-memory property for kdump kernel"
This happens because the size estimation for usable memory properties
for the kdump kernel's FDT is based on the online memory whereas the
usable memory properties include max memory. In short, the hot-pluggable
memory is not accounted for while estimating the size of the usable
memory properties.
The issue is addressed by calculating usable memory property size using
max hotplug address instead of the last online memory address.
Fixes: 2377c92e37 ("powerpc/kexec_file: fix FDT size estimation for kdump kernel")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230131030615.729894-1-sourabhjain@linux.ibm.com
sh vmlinux fails to link with GNU ld < 2.40 (likely < 2.36) since
commit 99cb0d917f ("arch: fix broken BuildID for arm64 and riscv").
This is similar to fixes for powerpc and s390:
commit 4b9880dbf3 ("powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT").
commit a494398bde ("s390: define RUNTIME_DISCARD_EXIT to fix link error
with GNU ld < 2.36").
$ sh4-linux-gnu-ld --version | head -n1
GNU ld (GNU Binutils for Debian) 2.35.2
$ make ARCH=sh CROSS_COMPILE=sh4-linux-gnu- microdev_defconfig
$ make ARCH=sh CROSS_COMPILE=sh4-linux-gnu-
`.exit.text' referenced in section `__bug_table' of crypto/algboss.o:
defined in discarded section `.exit.text' of crypto/algboss.o
`.exit.text' referenced in section `__bug_table' of
drivers/char/hw_random/core.o: defined in discarded section
`.exit.text' of drivers/char/hw_random/core.o
make[2]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
make[1]: *** [Makefile:1252: vmlinux] Error 2
arch/sh/kernel/vmlinux.lds.S keeps EXIT_TEXT:
/*
* .exit.text is discarded at runtime, not link time, to deal with
* references from __bug_table
*/
.exit.text : AT(ADDR(.exit.text)) { EXIT_TEXT }
However, EXIT_TEXT is thrown away by
DISCARD(include/asm-generic/vmlinux.lds.h) because
sh does not define RUNTIME_DISCARD_EXIT.
GNU ld 2.40 does not have this issue and builds fine.
This corresponds with Masahiro's comments in a494398bde:
"Nathan [Chancellor] also found that binutils
commit 21401fc7bf67 ("Duplicate output sections in scripts") cured this
issue, so we cannot reproduce it with binutils 2.36+, but it is better
to not rely on it."
Link: https://lkml.kernel.org/r/9166a8abdc0f979e50377e61780a4bba1dfa2f52.1674518464.git.tom.saeger@oracle.com
Fixes: 99cb0d917f ("arch: fix broken BuildID for arm64 and riscv")
Link: https://lore.kernel.org/all/Y7Jal56f6UBh1abE@dev-arch.thelio-3990X/
Link: https://lore.kernel.org/all/20230123194218.47ssfzhrpnv3xfez@oracle.com/
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dennis Gilmore <dennis@ausil.us>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit aa06a9bd85 ("ia64: fix clock_getres(CLOCK_MONOTONIC) to
report ITC frequency"), gcc 10.1.0 fails to build ia64 with the gnomic:
| ../arch/ia64/kernel/sys_ia64.c: In function 'ia64_clock_getres':
| ../arch/ia64/kernel/sys_ia64.c:189:3: error: a label can only be part of a statement and a declaration is not a statement
| 189 | s64 tick_ns = DIV_ROUND_UP(NSEC_PER_SEC, local_cpu_data->itc_freq);
This line appears immediately after a case label in a switch.
Move the declarations out of the case, to the top of the function.
Link: https://lkml.kernel.org/r/20230117151632.393836-1-james.morse@arm.com
Fixes: aa06a9bd85 ("ia64: fix clock_getres(CLOCK_MONOTONIC) to report ITC frequency")
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Sergei Trofimovich <slyich@gmail.com>
Cc: Émeric Maschino <emeric.maschino@gmail.com>
Cc: matoro <matoro_mailinglist_kernel@matoro.tk>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Historically calls to __decompress() didn't specify "out_len" parameter
on many architectures including s390, expecting that no writes beyond
uncompressed kernel image are performed. This has changed since commit
2aa14b1ab2 ("zstd: import usptream v1.5.2") which includes zstd library
commit 6a7ede3dfccb ("Reduce size of dctx by reutilizing dst buffer
(#2751)"). Now zstd decompression code might store literal buffer in
the unwritten portion of the destination buffer. Since "out_len" is
not set, it is considered to be unlimited and hence free to use for
optimization needs. On s390 this might corrupt initrd or ipl report
which are often placed right after the decompressor buffer. Luckily the
size of uncompressed kernel image is already known to the decompressor,
so to avoid the problem simply specify it in the "out_len" parameter.
Link: 6a7ede3dfc
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Link: https://lore.kernel.org/r/patch-1.thread-41c676.git-41c676c2d153.your-ad-here.call-01675030179-ext-9637@work.hours
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In kernels compiled with CONFIG_PARAVIRT=n, the compiler re-orders the
DR7 read in exc_nmi() to happen before the call to sev_es_ist_enter().
This is problematic when running as an SEV-ES guest because in this
environment the DR7 read might cause a #VC exception, and taking #VC
exceptions is not safe in exc_nmi() before sev_es_ist_enter() has run.
The result is stack recursion if the NMI was caused on the #VC IST
stack, because a subsequent #VC exception in the NMI handler will
overwrite the stack frame of the interrupted #VC handler.
As there are no compiler barriers affecting the ordering of DR7
reads/writes, make the accesses to this register volatile, forbidding
the compiler to re-order them.
[ bp: Massage text, make them volatile too, to make sure some
aggressive compiler optimization pass doesn't discard them. ]
Fixes: 315562c9af ("x86/sev-es: Adjust #VC IST Stack on entering NMI handler")
Reported-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230127035616.508966-1-aik@amd.com
If a relocatable kernel is loaded at a non-zero address and told not to
relocate to zero (kdump or RELOCATABLE_TEST), the mapping of the
interrupt code at zero is left with RWX permissions.
That is a security weakness, and leads to a warning at boot if
CONFIG_DEBUG_WX is enabled:
powerpc/mm: Found insecure W+X mapping at address 00000000056435bc/0xc000000000000000
WARNING: CPU: 1 PID: 1 at arch/powerpc/mm/ptdump/ptdump.c:193 note_page+0x484/0x4c0
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.2.0-rc1-00001-g8ae8e98aea82-dirty #175
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,git-dd0dca hv:linux,kvm pSeries
NIP: c0000000004a1c34 LR: c0000000004a1c30 CTR: 0000000000000000
REGS: c000000003503770 TRAP: 0700 Not tainted (6.2.0-rc1-00001-g8ae8e98aea82-dirty)
MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 24000220 XER: 00000000
CFAR: c000000000545a58 IRQMASK: 0
...
NIP note_page+0x484/0x4c0
LR note_page+0x480/0x4c0
Call Trace:
note_page+0x480/0x4c0 (unreliable)
ptdump_pmd_entry+0xc8/0x100
walk_pgd_range+0x618/0xab0
walk_page_range_novma+0x74/0xc0
ptdump_walk_pgd+0x98/0x170
ptdump_check_wx+0x94/0x100
mark_rodata_ro+0x30/0x70
kernel_init+0x78/0x1a0
ret_from_kernel_thread+0x5c/0x64
The fix has two parts. Firstly the pages from zero up to the end of
interrupts need to be marked read-only, so that they are left with R-X
permissions. Secondly the mapping logic needs to be taught to ensure
there is a page boundary at the end of the interrupt region, so that the
permission change only applies to the interrupt text, and not the region
following it.
Fixes: c55d7b5e64 ("powerpc: Remove STRICT_KERNEL_RWX incompatibility with RELOCATABLE")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230110124753.1325426-2-mpe@ellerman.id.au
If a relocatable kernel is loaded at an address that is not 2MB aligned
and told not to relocate to zero, the kernel can crash due to
mark_rodata_ro() incorrectly changing some read-write data to read-only.
Scenarios where the misalignment can occur are when the kernel is
loaded by kdump or using the RELOCATABLE_TEST config option.
Example crash with the kernel loaded at 5MB:
Run /sbin/init as init process
BUG: Unable to handle kernel data access on write at 0xc000000000452000
Faulting instruction address: 0xc0000000005b6730
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 1 PID: 1 Comm: init Not tainted 6.2.0-rc1-00011-g349188be4841 #166
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,git-5b4c5a hv:linux,kvm pSeries
NIP: c0000000005b6730 LR: c000000000ae9ab8 CTR: 0000000000000380
REGS: c000000004503250 TRAP: 0300 Not tainted (6.2.0-rc1-00011-g349188be4841)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 44288480 XER: 00000000
CFAR: c0000000005b66ec DAR: c000000000452000 DSISR: 0a000000 IRQMASK: 0
...
NIP memset+0x68/0x104
LR zero_user_segments.constprop.0+0xa8/0xf0
Call Trace:
ext4_mpage_readpages+0x7f8/0x830
ext4_readahead+0x48/0x60
read_pages+0xb8/0x380
page_cache_ra_unbounded+0x19c/0x250
filemap_fault+0x58c/0xae0
__do_fault+0x60/0x100
__handle_mm_fault+0x1230/0x1a40
handle_mm_fault+0x120/0x300
___do_page_fault+0x20c/0xa80
do_page_fault+0x30/0xc0
data_access_common_virt+0x210/0x220
This happens because mark_rodata_ro() tries to change permissions on the
range _stext..__end_rodata, but _stext sits in the middle of the 2MB
page from 4MB to 6MB:
radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec)
radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000000400000-0x0000000002400000 with 2.00 MiB pages (exec)
The logic that changes the permissions assumes the linear mapping was
split correctly at boot, so it marks the entire 2MB page read-only. That
leads to the write fault above.
To fix it, the boot time mapping logic needs to consider that if the
kernel is running at a non-zero address then _stext is a boundary where
it must split the mapping.
That leads to the mapping being split correctly, allowing the rodata
permission change to take happen correctly, with no spillover:
radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec)
radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000000400000-0x0000000000500000 with 64.0 KiB pages
radix-mmu: Mapped 0x0000000000500000-0x0000000000600000 with 64.0 KiB pages (exec)
radix-mmu: Mapped 0x0000000000600000-0x0000000002400000 with 2.00 MiB pages (exec)
If the kernel is loaded at a 2MB aligned address, the mapping continues
to use 2MB pages as before:
radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec)
radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000000400000-0x0000000002c00000 with 2.00 MiB pages (exec)
radix-mmu: Mapped 0x0000000002c00000-0x0000000100000000 with 2.00 MiB pages
Fixes: c55d7b5e64 ("powerpc: Remove STRICT_KERNEL_RWX incompatibility with RELOCATABLE")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230110124753.1325426-1-mpe@ellerman.id.au
In kexec_extra_fdt_size_ppc64() there's logic to estimate how much
extra space will be needed in the device tree for some memory related
properties.
That logic uses the size of RAM divided by drmem_lmb_size() to do the
estimation. However drmem_lmb_size() can be zero if the machine has no
hotpluggable memory configured, which is the case when booting with qemu
and no maxmem=x parameter is passed (the default).
The division by zero is reported by UBSAN, and can also lead to an
overflow and a warning from kvmalloc, and kdump kernel loading fails:
WARNING: CPU: 0 PID: 133 at mm/util.c:596 kvmalloc_node+0x15c/0x160
Modules linked in:
CPU: 0 PID: 133 Comm: kexec Not tainted 6.2.0-rc5-03455-g07358bd97810 #223
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1200 0xf000005 of:SLOF,git-dd0dca pSeries
NIP: c00000000041ff4c LR: c00000000041fe58 CTR: 0000000000000000
REGS: c0000000096ef750 TRAP: 0700 Not tainted (6.2.0-rc5-03455-g07358bd97810)
MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24248242 XER: 2004011e
CFAR: c00000000041fed0 IRQMASK: 0
...
NIP kvmalloc_node+0x15c/0x160
LR kvmalloc_node+0x68/0x160
Call Trace:
kvmalloc_node+0x68/0x160 (unreliable)
of_kexec_alloc_and_setup_fdt+0xb8/0x7d0
elf64_load+0x25c/0x4a0
kexec_image_load_default+0x58/0x80
sys_kexec_file_load+0x5c0/0x920
system_call_exception+0x128/0x330
system_call_vectored_common+0x15c/0x2ec
To fix it, skip the calculation if drmem_lmb_size() is zero.
Fixes: 2377c92e37 ("powerpc/kexec_file: fix FDT size estimation for kdump kernel")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230130014707.541110-1-mpe@ellerman.id.au
The recent commit 76d588dddc ("powerpc/imc-pmu: Fix use of mutex in
IRQs disabled section") fixed warnings (and possible deadlocks) in the
IMC PMU driver by converting the locking to use spinlocks.
It also converted the init-time nest_init_lock to a spinlock, even
though it's not used at runtime in IRQ disabled sections or while
holding other spinlocks.
This leads to warnings such as:
BUG: sleeping function called from invalid context at include/linux/percpu-rwsem.h:49
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.2.0-rc2-14719-gf12cd06109f4-dirty #1
Hardware name: Mambo,Simulated-System POWER9 0x4e1203 opal:v6.6.6 PowerNV
Call Trace:
dump_stack_lvl+0x74/0xa8 (unreliable)
__might_resched+0x178/0x1a0
__cpuhp_setup_state+0x64/0x1e0
init_imc_pmu+0xe48/0x1250
opal_imc_counters_probe+0x30c/0x6a0
platform_probe+0x78/0x110
really_probe+0x104/0x420
__driver_probe_device+0xb0/0x170
driver_probe_device+0x58/0x180
__driver_attach+0xd8/0x250
bus_for_each_dev+0xb4/0x140
driver_attach+0x34/0x50
bus_add_driver+0x1e8/0x2d0
driver_register+0xb4/0x1c0
__platform_driver_register+0x38/0x50
opal_imc_driver_init+0x2c/0x40
do_one_initcall+0x80/0x360
kernel_init_freeable+0x310/0x3b8
kernel_init+0x30/0x1a0
ret_from_kernel_thread+0x5c/0x64
Fix it by converting nest_init_lock back to a mutex, so that we can call
sleeping functions while holding it. There is no interaction between
nest_init_lock and the runtime spinlocks used by the actual PMU routines.
Fixes: 76d588dddc ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section")
Tested-by: Kajol Jain<kjain@linux.ibm.com>
Reviewed-by: Kajol Jain<kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230130014401.540543-1-mpe@ellerman.id.au
Interrupt entry sets the soft mask to IRQS_ALL_DISABLED to match the
hard irq disabled state. So when should_hard_irq_enable() returns true
because we want PMI interrupts in irq handlers, MSR[EE] is enabled but
PMIs just get soft-masked. Fix this by clearing IRQS_PMI_DISABLED before
enabling MSR[EE].
This also tidies some of the warnings, no need to duplicate them in
both should_hard_irq_enable() and do_hard_irq_enable().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121100156.2824054-1-npiggin@gmail.com
When PMI interrupts are soft-masked, local_irq_save() will clear the PMI
mask bit, allowing PMIs in and causing a race condition. This causes a
deadlock in native_hpte_insert via hash_preload, which depends on PMIs
being disabled since commit 8b91cee5ea ("powerpc/64s/hash: Make hash
faults work in NMI context"). native_hpte_insert calls local_irq_save().
It's possible the lpar hash code is also affected when tracing is
enabled because __trace_hcall_entry() calls local_irq_save().
Fix this by making arch_local_irq_save() _or_ the IRQS_DISABLED bit into
the mask.
This was found with the stress_hpt option with a kbuild workload running
together with `perf record -g`.
Fixes: f442d00480 ("powerpc/64s: Add support to mask perf interrupts and replay them")
Fixes: 8b91cee5ea ("powerpc/64s/hash: Make hash faults work in NMI context")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Just take the fix without the new warning]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121095352.2823517-1-npiggin@gmail.com
