[ Upstream commit 1eb8d61ac5 ]
This reverts commit 860690a93e.
On the MT8183, the SSPM related clocks were removed claiming a lack of
usage. This however causes some issues when the driver was converted to
the new simple-probe mechanism. This mechanism allocates enough space
for all the clocks defined in the clock driver, not the highest index
in the DT binding. This leads to out-of-bound writes if their are holes
in the DT binding or the driver (due to deprecated or unimplemented
clocks). These errors can go unnoticed and cause memory corruption,
leading to crashes in unrelated areas, or nothing at all. KASAN will
detect them.
Add the SSPM related clocks back to the MT8183 clock driver to fully
implement the DT binding. The SSPM clocks are for the power management
co-processor, and should never be turned off. They are marked as such.
Fixes: 3f37ba7cc3 ("clk: mediatek: mt8183: Convert all remaining clocks to common probe")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230719074251.1219089-1-wenst@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a29b2fccf5 upstream.
smatch reports:
drivers/clk/imx/clk-imx93.c:294 imx93_clocks_probe() error: uninitialized symbol 'base'.
Indeed, in case of an error, the wrong (yet uninitialized) variable is
converted to an error code and returned.
Fix this by propagating the error code in the correct variable.
Fixes: e02ba11b45 ("clk: imx93: fix memory leak and missing unwind goto in imx93_clocks_probe")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/9c2acd81-3ad8-485d-819e-9e4201277831@kadam.mountain
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202306161533.4YDmL22b-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230711150812.3562221-1-geert+renesas@glider.be
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8fd492e77f ]
The mdp_clk_src clock should not be turned off. Instead it should be
'parked' to the XO, as most of other mdp_clk_src clocks. Fix that by
using the clk_rcg2_shared_ops.
Fixes: d8b212014e ("clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230507175335.2321503-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7510e80f4a ]
The order of DT_SLEEP_CLK and DT_XO are swapped and it is incorrect.
Due to which the clocks for which the parent should be XO is having parent
as SLEEP_CLK and vice versa. So fix the same by re-ordering the entries.
Fixes: 3d89d52970 ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC")
Reported-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230417105607.4091-1-quic_kathirav@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63d56adf04 ]
GPLL0_OUT_DIV (.fw_name = "gcc_disp_gpll0_div_clk_src") was previously
made to reuse the same parent enum entry as GPLL0_OUT_MAIN
(.fw_name = "gcc_disp_gpll0_clk_src") in parent_map_2.
Resolve it by introducing its own entry in the parent enum and
correctly assigning it in disp_cc_parent_map_2[].
Fixes: cc517ea333 ("clk: qcom: Add display clock controller driver for QCM2290")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230412-topic-qcm_dispcc-v2-2-bce7dd512fe4@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92dfee0fc8 ]
BI_TCXO_AO (.fw_name = "bi_tcxo_ao") was previously made to reuse the
same parent enum entry as BI_TCXO (.fw_name = "bi_tcxo") in parent_map_2.
Resolve it by introducing its own entry in the parent enum and
correctly assigning it in disp_cc_parent_map_2[].
Fixes: cc517ea333 ("clk: qcom: Add display clock controller driver for QCM2290")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230412-topic-qcm_dispcc-v2-1-bce7dd512fe4@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 349b5bed53 ]
Networking resets in IPQ6018 all use bitmask as they require multiple
bits to be set and cleared instead of a single bit.
So, current networking resets have the same register and bit 0 set which
is clearly incorrect.
Fixes: d9db07f088 ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526190855.2941291-2-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e4d179532 ]
Camera titan top GDSC is a parent supply to all other camera GDSCs. Titan
top GDSC is required to be enabled before enabling any other camera GDSCs
and it should be disabled only after all other camera GDSCs are disabled.
Ensure this behavior by marking titan top GDSC as parent of all other
camera GDSCs.
Fixes: 15d09e830b ("clk: qcom: camcc: Add camera clock controller driver for SC7180")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501142932.13049-1-quic_tdas@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 853c064b57 ]
After the internal discussions, it looks like this clock is managed by
RPM itself. Linux kernel should not touch it on its own, as this causes
disagreement with RPM. Shutting down this clock causes the OCMEM<->GPU
interface to stop working, resulting in GPU hangchecks/timeouts.
Fixes: d8b212014e ("clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)")
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230508153319.2371645-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fb933e56f ]
devm_clk_notifier_register() allocates a devres resource for clk
notifier but didn't register that to the device, so the notifier didn't
get unregistered on device detach and the allocated resource was leaked.
Fix the issue by registering the resource through devres_add().
This issue was found with kmemleak on a Chromebook.
Fixes: 6d30d50d03 ("clk: add devm variant of clk_notifier_register")
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20230619112253.v2.1.I13f060c10549ef181603e921291bdea95f83033c@changeid
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 267ad94b13 ]
Pointers from synth_clock_names[] should be freed at the end of probe
either on probe success or failure path.
Fixes: b7bbf6ec49 ("clk: si5341: Allow different output VDD_SEL values")
Fixes: 9b13ff4340 ("clk: si5341: Add sysfs properties to allow checking/resetting device faults")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230530093913.1656095-6-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2560114c06 ]
In case devm_clk_hw_register() fails for one of synth clocks the probe
continues. Later on, when registering output clocks which have as parents
all the synth clocks, in case there is registration failure for at least
one synth clock the information passed to clk core for registering output
clock is not right: init.num_parents is fixed but init.parents may contain
an array with less parents.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230530093913.1656095-4-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b270ae6173 ]
In case of error after of_ioremap() the resource must be released:
call iounmap() where appropriate to fix that.
Fixes: 41138fbf87 ("clk: mediatek: mt8173: Migrate to platform driver and common probe")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230615122051.546985-4-angelogioacchino.delregno@collabora.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3dc265b369 ]
The of_iomap() function returns NULL in case of error so usage of
PTR_ERR() is wrong!
Change that to return -ENOMEM in case of failure.
Fixes: 41138fbf87 ("clk: mediatek: mt8173: Migrate to platform driver and common probe")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230615122051.546985-3-angelogioacchino.delregno@collabora.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51821765e8 ]
In the rare case in which one of the clock drivers has divider clocks
but not composite clocks, mtk_clk_simple_probe() would not io(re)map,
hence passing a NULL pointer to mtk_clk_register_dividers().
To fix this issue, extend the `if` conditional to also check if any
divider clocks are present. While at it, also make sure the iomem
pointer is NULL if no composite/divider clocks are declared, as we
are checking for that when iounmapping it in the error path.
This hasn't been seen on any MediaTek clock driver as the current ones
always declare composite clocks along with divider clocks, but this is
still an important fix for a future potential KP.
Fixes: 1fe074b1f1 ("clk: mediatek: Add divider clocks to mtk_clk_simple_{probe,remove}()")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230615122051.546985-2-angelogioacchino.delregno@collabora.com
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53a06e5924 ]
The tegra and tegra needs to be freed in the error handling path, otherwise
it will be leaked.
Fixes: 2db04f16b5 ("clk: tegra: Add EMC clock driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221209094124.71043-1-yuancan@huawei.com
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c632a6396 ]
Smatch detected this potential error pointer dereference
clk_wzrd_register_divider(). If devm_clk_hw_register() fails then
it sets "hw" to an error pointer and then dereferences it on the
next line. Return the error directly instead.
Fixes: 5a853722eb ("staging: clocking-wizard: Add support for dynamic reconfiguration")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/f0e39b5c-4554-41e0-80d9-54ca3fabd060@kili.mountain
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da2edb3e3c ]
Smatch detected an off by one in this code:
drivers/clk/bcm/clk-raspberrypi.c:374 raspberrypi_discover_clocks()
error: buffer overflow 'data->hws' 16 <= 16
The data->hws[] array has RPI_FIRMWARE_NUM_CLK_ID elements so the >
comparison needs to changed to >=.
Fixes: 12c90f3f27 ("clk: bcm: rpi: Add variant structure")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/5a850b08-d2f5-4794-aceb-a6b468965139@kili.mountain
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3db7285e04 ]
Smatch reports:
drivers/clk/mediatek/clk-mtk.c:583 mtk_clk_simple_probe() warn:
'base' from of_iomap() not released on lines: 496.
This problem was also found in linux-next. In mtk_clk_simple_probe(),
base is not released when handling errors
if clk_data is not existed, which may cause a leak.
So free_base should be added here to release base.
Fixes: c58cd0e40f ("clk: mediatek: Add mtk_clk_simple_probe() to simplify clock providers")
Signed-off-by: Bosi Zhang <u201911157@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230422084331.47198-1-u201911157@hust.edu.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 878b02d5f3 ]
Replace of_iomap() and kzalloc() with devm_of_iomap() and devm_kzalloc()
which can automatically release the related memory when the device
or driver is removed or unloaded to avoid potential memory leak.
In this case, iounmap(anatop_base) in line 427,433 are removed
as manual release is not required.
Besides, referring to clk-imx8mq.c, check the return code of
of_clk_add_hw_provider, if it returns negtive, print error info
and unregister hws, which makes the program more robust.
Fixes: 9c140d9926 ("clk: imx: Add support for i.MX8MP clock driver")
Signed-off-by: Yuxing Liu <lyx2022@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230503070607.2462-1-lyx2022@hust.edu.cn
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e02ba11b45 ]
In function probe(), it returns directly without unregistered hws
when error occurs.
Fix this by adding 'goto unregister_hws;' on line 295 and
line 310.
Use devm_kzalloc() instead of kzalloc() to automatically
free the memory using devm_kfree() when error occurs.
Replace of_iomap() with devm_of_iomap() to automatically
handle the unused ioremap region and delete 'iounmap(anatop_base);'
in unregister_hws.
Fixes: 24defbe194 ("clk: imx: add i.MX93 clk")
Signed-off-by: Zhanhao Hu <zero12113@hust.edu.cn>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230601033825.336558-1-zero12113@hust.edu.cn
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 188d070de9 ]
Use devm_of_iomap() instead of of_iomap() to automatically handle
the unused ioremap region.
If any error occurs, regions allocated by kzalloc() will leak,
but using devm_kzalloc() instead will automatically free the memory
using devm_kfree().
Fixes: daeb145455 ("clk: imx: imx8mn: Switch to clk_hw based API")
Fixes: 96d6392b54 ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Hao Luo <m202171776@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230411015107.2645-1-m202171776@hust.edu.cn
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b280598ab ]
Use devm_of_iomap() instead of of_iomap() to automatically
handle the unused ioremap region. If any error occurs, regions allocated by
kzalloc() will leak, but using devm_kzalloc() instead will automatically
free the memory using devm_kfree().
Also, fix error handling of hws by adding unregister_hws label, which
unregisters remaining hws when iomap failed.
Fixes: 7154b046d8 ("clk: imx: Add initial support for i.MXRT1050 clock driver")
Signed-off-by: Kai Ma <kaima@hust.edu.cn>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230418113451.151312-1-kaima@hust.edu.cn
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8208181fe5 ]
Currently, certain clocks are derrived as a divider from their
parent clock. For some clocks, even when CLK_SET_RATE_PARENT
is set, the parent clock is not properly set which can lead
to some relatively inaccurate clock values.
Unlike imx/clk-composite-93 and imx/clk-divider-gate, it
cannot rely on calling a standard determine_rate function,
because the 8m composite clocks have a pre-divider and
post-divider. Because of this, a custom determine_rate
function is necessary to determine the maximum clock
division which is equivalent to pre-divider * the
post-divider.
With this added, the system can attempt to adjust the parent rate
when the proper flags are set which can lead to a more precise clock
value.
On the imx8mplus, no clock changes are present.
On the Mini and Nano, this can help achieve more accurate
lcdif clocks. When trying to get a pixel clock of 31.500MHz
on an imx8m Nano, the clocks divided the 594MHz down, but
left the parent rate untouched which caused a calulation error.
Before:
video_pll 594000000
video_pll_bypass 594000000
video_pll_out 594000000
disp_pixel 31263158
disp_pixel_clk 31263158
Variance = -236842 Hz
After this patch:
video_pll 31500000
video_pll_bypass 31500000
video_pll_out 31500000
disp_pixel 31500000
disp_pixel_clk 31500000
Variance = 0 Hz
All other clocks rates and parent were the same.
Similar results on imx8mm were found.
Fixes: 690dccc4a0 ("Revert "clk: imx: composite-8m: Add support to determine_rate"")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230506195325.876871-1-aford173@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed046ac74d ]
Commit 262ca38f4b ("clk: Stop forwarding clk_rate_requests to the
parent") introduced the public clk_hw_forward_rate_request() function,
but didn't export the symbol. Make sure it's the case.
Fixes: 262ca38f4b ("clk: Stop forwarding clk_rate_requests to the parent")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-1-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1c20885d3 ]
As per the RZ/G2L HW(Rev.1.30 May2023) manual, there are no "write enable"
bits in the CPG_SIPLL5_CLK1 register. So fix the CPG_SIPLL5_CLK register
write by removing the "write enable" bits.
Fixes: 1561380ee7 ("clk: renesas: rzg2l: Add FOUTPOSTDIV clk support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230518152334.514922-1-biju.das.jz@bp.renesas.com
[geert: Remove CPG_SIPLL5_CLK1_*_WEN bit definitions]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 632c60ecd2 ]
This loop is freeing "clk" so it needs to use list_for_each_entry_safe().
Otherwise it dereferences a freed variable to get the next item on the
loop.
Fixes: 77d8f3068c ("clk: imx: scu: add two cells binding support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/0793fbd1-d2b5-4ec2-9403-3c39343a3e2d@kili.mountain
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad527ca87e ]
The .driver_data content in i2c_device_id table must match the
.data content in of_device_id table, else device_get_match_data()
would return bogus value on i2c_device_id match. Align the two
tables.
The i2c_device_id table is now converted from of_device_id using
's@.compatible = "renesas,\([^"]\+"\), .data = \(.*\)@"\1, .driver_data = (kernel_ulong_t)\2@'
Fixes: 892e0ddea1 ("clk: rs9: Add Renesas 9-series PCIe clock generator driver")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20230507133906.15061-3-marek.vasut+renesas@mailbox.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5e10beeaf ]
The .driver_data content in i2c_device_id table must match the
.data content in of_device_id table, else device_get_match_data()
would return bogus value on i2c_device_id match. Align the two
tables.
The i2c_device_id table is now converted from of_device_id using
's@.compatible = "renesas,\([^"]\+"\), .data = \(.*\)@"\1, .driver_data = (kernel_ulong_t)\2@'
Fixes: 48c5e98fed ("clk: Renesas versaclock7 ccf device driver")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20230507133906.15061-2-marek.vasut+renesas@mailbox.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be3471c5bd ]
The .driver_data content in i2c_device_id table must match the
.data content in of_device_id table, else device_get_match_data()
would return bogus value on i2c_device_id match. Align the two
tables.
The i2c_device_id table is now converted from of_device_id using
's@.compatible = "idt,\([^"]\+"\), .data = \(.*\)@"\1, .driver_data = (kernel_ulong_t)\2@'
Fixes: 9adddb01ce ("clk: vc5: Add structure to describe particular chip features")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20230507133906.15061-1-marek.vasut+renesas@mailbox.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
sparse points out an embarrasing bug in an older patch of mine,
which uses the register offset instead of an __iomem pointer:
drivers/clk/pxa/clk-pxa3xx.c:167:9: sparse: sparse: Using plain integer as NULL pointer
Unlike sparse, gcc and clang ignore this bug and fail to warn
because a literal '0' is considered a valid representation of
a NULL pointer.
Fixes: 3c816d950a ("ARM: pxa: move clk register definitions to driver")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305111301.RAHohdob-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230511105845.299859-1-arnd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The given operations are inverted for the wrong registers which makes
multiple of the mt8365 hardware units unusable. In my setup at least usb
did not work.
Fixed by swapping the operations with the inverted ones.
Reported-by: Alexandre Mergnat <amergnat@baylibre.com>
Fixes: 905b7430d3 ("clk: mediatek: mt8365: Convert simple_gate to mtk_gate clocks")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20230511133226.913600-1-msp@baylibre.com
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
ULONG_MAX is used by a few drivers to figure out the highest available
clock rate via clk_round_rate(clk, ULONG_MAX). Since abs() takes a
signed value as input, the current logic effectively calculates with
ULONG_MAX = -1, which results in the worst parent clock being chosen
instead of the best one.
For example on Rockchip RK3588 the eMMC driver tries to figure out
the highest available clock rate. There are three parent clocks
available resulting in the following rate diffs with the existing
logic:
GPLL: abs(18446744073709551615 - 1188000000) = 1188000001
CPLL: abs(18446744073709551615 - 1500000000) = 1500000001
XIN24M: abs(18446744073709551615 - 24000000) = 24000001
As a result the clock framework will promote a maximum supported
clock rate of 24 MHz, even though 1.5GHz are possible. With the
updated logic any casting between signed and unsigned is avoided
and the numbers look like this instead:
GPLL: 18446744073709551615 - 1188000000 = 18446744072521551615
CPLL: 18446744073709551615 - 1500000000 = 18446744072209551615
XIN24M: 18446744073709551615 - 24000000 = 18446744073685551615
As a result the parent with the highest acceptable rate is chosen
instead of the parent clock with the lowest one.
Cc: stable@vger.kernel.org
Fixes: 4950240800 ("mmc: sdhci-of-dwcmshc: properly determine max clock on Rockchip")
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230526171057.66876-2-sebastian.reichel@collabora.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Before the patch [1], the clock probe was done directly in the
clk-mt8365 driver. In this probe function, the array which stores the
data clocks is sized using the higher defined numbers (*_NR_CLOCK) in
the clock lists [2]. Currently, with the patch [1], the specific
clk-mt8365 probe function is replaced by the mtk generic one [3], which
size the clock data array by adding all the clock descriptor array size
provided by the clk-mt8365 driver.
Actually, all clock indexes come from the header file [2], that mean, if
there are more clock (then more index) in the header file [2] than the
number of clock declared in the clock descriptor arrays (which is the
case currently), the clock data array will be undersized and then the
generic probe function will overflow when it will try to write in
"clk_data[CLK_INDEX]". Actually, instead of crashing at boot, the probe
function returns an error in the log which looks like:
"of_clk_hw_onecell_get: invalid index 135", then this clock isn't
enabled.
Solve this issue by adding in the driver the missing clocks declared in
the header clock file [2].
[1]: Commit ffe91cb28f ("clk: mediatek: mt8365: Convert to
mtk_clk_simple_{probe,remove}()")
[2]: include/dt-bindings/clock/mediatek,mt8365-clk.h
[3]: drivers/clk/mediatek/clk-mtk.c
Fixes: ffe91cb28f ("clk: mediatek: mt8365: Convert to mtk_clk_simple_{probe,remove}()")
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230517-fix-clk-index-v3-1-be4df46065c4@baylibre.com
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Revert an i.MX patch that's causing video failures because division
math goes sideways
- Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit
variable instead of the usual u64 type
- Fix a Kconfig bug in the StarFive JH7110 clk config that selects a
reset controller when it can't be selected
-----BEGIN PGP SIGNATURE-----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=IxvN
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple more patches that would be good to get into -rc1:
- Revert an i.MX patch that's causing video failures because division
math goes sideways
- Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit
variable instead of the usual u64 type
- Fix a Kconfig bug in the StarFive JH7110 clk config that selects a
reset controller when it can't be selected"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case
clk: sp7021: Adjust width of _m in HWM_FIELD_PREP()
Revert "clk: imx: composite-8m: Add support to determine_rate"
When (ARCH_STARFIVE [=n] && COMPILE_TEST [=y] && RESET_CONTROLLER [=n]),
RESET_STARFIVE_JH7110 can't be selected by CLK_STARFIVE_JH7110_SYS
and CLK_STARFIVE_JH7110_AON.
Add a condition `if RESET_CONTROLLER` to fix it. Also, delete redundant
selected options of CLK_STARFIVE_JH7110_AON because these options are
already selected by the dependency.
Fixes: edab7204af ("clk: starfive: Add StarFive JH7110 system clock driver")
Fixes: b2ab3c94f4 ("clk: starfive: Add StarFive JH7110 always-on clock driver")
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230418123756.62495-2-hal.feng@starfivetech.com
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When building with clang + W=1, there is a warning around an internal
comparison check within the FIELD_PREP() macro, due to a 32-bit variable
comparison against ~0ull:
drivers/clk/clk-sp7021.c:316:8: error: result of comparison of constant 18446744073709551615 with expression of type 'typeof (_Generic((_m), ...' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
r0 |= HWM_FIELD_PREP(MASK_SEL_FRA, clk->p[SEL_FRA]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/clk/clk-sp7021.c:45:15: note: expanded from macro 'HWM_FIELD_PREP'
(_m << 16) | FIELD_PREP(_m, value); \
^~~~~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:114:3: note: expanded from macro 'FIELD_PREP'
__BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:71:53: note: expanded from macro '__BF_FIELD_CHECK'
BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) > \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/compiler_types.h:397:22: note: expanded from macro 'compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:385:23: note: expanded from macro '_compiletime_assert'
__compiletime_assert(condition, msg, prefix, suffix)
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler_types.h:377:9: note: expanded from macro '__compiletime_assert'
if (!(condition)) \
^~~~~~~~~
This is expected given the types of the input. Increase the size of the
temporary variable in HWM_FIELD_PREP() to eliminate the warning, which
follows the logic of commit cfd6fb45cf ("crypto: ccree - avoid
out-of-range warnings from clang") for the same reasons.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230501-sp7021-field_prep-warning-v1-1-5b36d71feefe@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/202303221947.pXP2v4xJ-lkp@intel.com/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This reverts commit 156e96ff21.
This patch was found to cause some division issues on the i.MX8MP
which causes the video clocks to not properly divide when division
was greate than 8. This causes video failures on disp1_pix and
disp2_pix clocks.
Until a better solution is found, we'll have to revert this.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20230423123828.1346511-1-aford173@gmail.com
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
