mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-08 18:57:22 +00:00
3,045 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Daniel Sneddon
|
ff0642207e |
x86/speculation: Add Gather Data Sampling mitigation
commit
|
||
Demi Marie Obenour
|
c76d96c555 |
xen: speed up grant-table reclaim
commit
|
||
Bhupesh Sharma
|
a44696977d |
usb: misc: eud: Fix eud sysfs path (use 'qcom_eud')
[ Upstream commit |
||
Linus Torvalds
|
3af49062b0 |
- New Drivers
- Add support for Renesas RZ/G2L MTU3
- New Device Support
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
- Remove Device Support
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
- New Functionality
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
- Fix-ups
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
- Bug Fixes
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths
-----BEGIN PGP SIGNATURE-----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=EBtX
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Renesas RZ/G2L MTU3
New Device Support:
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
Remove Device Support:
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
New Functionality:
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
Fix-ups:
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
Bug Fixes:
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths"
* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
mfd: axp20x: Add support for AXP15060 PMIC
dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
dt-bindings: mfd: dlg,da9063: Document voltage monitoring
dt-bindings: mfd: stm32: Remove unnecessary blank lines
dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
counter: Add Renesas RZ/G2L MTU3a counter driver
Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
mfd: Add Renesas RZ/G2L MTU3a core driver
dt-bindings: timer: Document RZ/G2L MTU3a bindings
mfd: rsmu_i2c: Convert to i2c's .probe_new() again
mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
mfd: dln2: Fix memory leak in dln2_probe()
mfd: axp20x: Fix axp288 writable-ranges
...
|
||
|
Linus Torvalds
|
58390c8ce1 |
IOMMU Updates for Linux 6.4
Including:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=OvTo
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
|
||
|
Linus Torvalds
|
7acc137211 |
cxl for v6.4
- Refactor the DOE infrastructure (Data Object Exchange PCI-config-cycle
mailbox) to be a facility of the PCI core rather than the CXL core.
This is foundational for upcoming support for PCI device-attestation and
PCIe / CXL link encryption.
- Add support for retrieving and injecting poison for CXL memory
expanders. This enabling uses trace-events to convey CXL media error
records to user tooling. It includes translation of device-local
addresses (DPA) to system physical addresses (SPA) and their
corresponding CXL region.
- Fixes for decoder enumeration that missed v6.3-final
- Miscellaneous fixups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZE2nNwAKCRDfioYZHlFs
Z5c2AQCTWebok6CD+HN01xnIx+CBWAUQe0QIGR40dT2P6/WGEgEA8wMae0w/FDlc
lQDvSoIyPvy1hGO7Ppb0K2AT6jrQAgU=
=blcC
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link updates from Dan Williams:
"DOE support is promoted from drivers/cxl/ to drivers/pci/ with Bjorn's
blessing, and the CXL core continues to mature its media management
capabilities with support for listing and injecting media errors. Some
late fixes that missed v6.3-final are also included:
- Refactor the DOE infrastructure (Data Object Exchange
PCI-config-cycle mailbox) to be a facility of the PCI core rather
than the CXL core.
This is foundational for upcoming support for PCI
device-attestation and PCIe / CXL link encryption.
- Add support for retrieving and injecting poison for CXL memory
expanders.
This enabling uses trace-events to convey CXL media error records
to user tooling. It includes translation of device-local addresses
(DPA) to system physical addresses (SPA) and their corresponding
CXL region.
- Fixes for decoder enumeration that missed v6.3-final
- Miscellaneous fixups"
* tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (38 commits)
cxl/test: Add mock test for set_timestamp
cxl/mbox: Update CMD_RC_TABLE
tools/testing/cxl: Require CONFIG_DEBUG_FS
tools/testing/cxl: Add a sysfs attr to test poison inject limits
tools/testing/cxl: Use injected poison for get poison list
tools/testing/cxl: Mock the Clear Poison mailbox command
tools/testing/cxl: Mock the Inject Poison mailbox command
cxl/mem: Add debugfs attributes for poison inject and clear
cxl/memdev: Trace inject and clear poison as cxl_poison events
cxl/memdev: Warn of poison inject or clear to a mapped region
cxl/memdev: Add support for the Clear Poison mailbox command
cxl/memdev: Add support for the Inject Poison mailbox command
tools/testing/cxl: Mock support for Get Poison List
cxl/trace: Add an HPA to cxl_poison trace events
cxl/region: Provide region info to the cxl_poison trace event
cxl/memdev: Add trigger_poison_list sysfs attribute
cxl/trace: Add TRACE support for CXL media-error records
cxl/mbox: Add GET_POISON_LIST mailbox command
cxl/mbox: Initialize the poison state
cxl/mbox: Restrict poison cmds to debugfs cxl_raw_allow_all
...
|
||
|
Linus Torvalds
|
7fa8a8ee94 |
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
||
|
Linus Torvalds
|
cec24b8b6b |
Char/Misc drivers for 6.4-rc1
Here is the "big" set of char/misc and other driver subsystems for 6.4-rc1. It's pretty big, but due to the removal of pcmcia drivers, almost breaks even for number of lines added vs. removed, a nice change. Included in here are: - removal of unused PCMCIA drivers (finally!) - Interconnect driver updates and additions - Lots of IIO driver updates and additions - MHI driver updates - Coresight driver updates - NVMEM driver updates, which required some OF updates - W1 driver updates and a new maintainer to manage the subsystem - FPGA driver updates - New driver subsystem, CDX, for AMD systems - lots of other small driver updates and additions All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp5Eg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynSXgCg0kSw3vUYwpsnhAsQkoPw1QVA23sAn2edRCMa GEkPWjrROueCom7xbLMu =eR+P -----END PGP SIGNATURE----- Merge tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc drivers updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystems for 6.4-rc1. It's pretty big, but due to the removal of pcmcia drivers, almost breaks even for number of lines added vs. removed, a nice change. Included in here are: - removal of unused PCMCIA drivers (finally!) - Interconnect driver updates and additions - Lots of IIO driver updates and additions - MHI driver updates - Coresight driver updates - NVMEM driver updates, which required some OF updates - W1 driver updates and a new maintainer to manage the subsystem - FPGA driver updates - New driver subsystem, CDX, for AMD systems - lots of other small driver updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits) mcb-lpc: Reallocate memory region to avoid memory overlapping mcb-pci: Reallocate memory region to avoid memory overlapping mcb: Return actual parsed size when reading chameleon table kernel/configs: Drop Android config fragments virt: acrn: Replace obsolete memalign() with posix_memalign() spmi: Add a check for remove callback when removing a SPMI driver spmi: fix W=1 kernel-doc warnings spmi: mtk-pmif: Drop of_match_ptr for ID table spmi: pmic-arb: Convert to platform remove callback returning void spmi: mtk-pmif: Convert to platform remove callback returning void spmi: hisi-spmi-controller: Convert to platform remove callback returning void w1: gpio: remove unnecessary ENOMEM messages w1: omap-hdq: remove unnecessary ENOMEM messages w1: omap-hdq: add SPDX tag w1: omap-hdq: allow compile testing w1: matrox: remove unnecessary ENOMEM messages w1: matrox: use inline over __inline__ w1: matrox: switch from asm to linux header w1: ds2482: do not use assignment in if condition w1: ds2482: drop unnecessary header ... |
||
|
Linus Torvalds
|
556eb8b791 |
Driver core changes for 6.4-rc1
Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5 LEGadNS38k5fs+73UaxV =7K4B -----END PGP SIGNATURE----- Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ... |
||
|
Linus Torvalds
|
4010e62b5b |
USB / Thunderbolt changes for 6.4-rc1
Here is the large set of USB and Thunderbolt changes for 6.4-rc1. "biggest" thing in here is the removal of two obsolete drivers, u132-hcd and ftdi-elan, making this a net-removal of code overall. Other than the driver removals, included in here are: - Thunderbolt updates for new hardware and features - xhci driver updates and fixes - dwc3 driver updates and fixes - gadget core and driver updates and features added - mtu3 driver updates - dwc2 driver fixes and updates - usb-serial driver updates - typec driver updates and fixes - platform remove callback changes - dts updates and conversions - other small changes All have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEqC+g8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynP6QCg0MnpRjOSFyAB0t9LWFng4rRikj4AoIpxvs2T GbU7NdPHU3fddq0KB+Nd =M+Ib -----END PGP SIGNATURE----- Merge tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the large set of USB and Thunderbolt changes for 6.4-rc1. The "biggest" thing in here is the removal of two obsolete drivers, u132-hcd and ftdi-elan, making this a net-removal of code overall. Other than the driver removals, included in here are: - Thunderbolt updates for new hardware and features - xhci driver updates and fixes - dwc3 driver updates and fixes - gadget core and driver updates and features added - mtu3 driver updates - dwc2 driver fixes and updates - usb-serial driver updates - typec driver updates and fixes - platform remove callback changes - dts updates and conversions - other small changes All have been in linux-next for a while with no reported problems" * tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits) usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API usb: dwc3: gadget: Execute gadget stop after halting the controller media: radio-shark: Add endpoint checks USB: sisusbvga: Add endpoint checks USB: core: Add routines for endpoint checks in old drivers usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk usb: dwc3: core: add support for disabling High-speed park mode dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs usb: mtu3: add optional clock xhci_ck and frmcnt_ck dt-bindings: usb: mtu3: add two optional clocks usb: mtu3: expose role-switch control to userspace usb: mtu3: unlock @mtu->lock just before giving back request usb: mtu3: fix kernel panic at qmu transfer done irq handler usb: mtu3: use boolean return value usb: mtu3: give back request when rx error happens usb: chipidea: fix missing goto in `ci_hdrc_probe` usb: gadget: udc: core: Prevent redundant calls to pullup usb: gadget: udc: core: Invoke usb_gadget_connect only when started usb: typec: ucsi: don't print PPM init deferred errors ... |
||
|
Linus Torvalds
|
34da76dca4 |
for-linus-2023042601
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIVAwUAZEmThqZi849r7WBJAQLKTxAAwLKvk8xCUVPardg2tYxLSaNJAeSgo4L0 CKgB52kXa5R6+L3OApKgkREkj0TotNpNA5Gc/1DlPiRrUXPAj7g+NS2ID8SfXOUd Iii42DoVZli03kG2xoLgU9Fy7mJ1JdfCC6dhP95y6oDzsZqb87M8sk+2G59KVhXO KXaVMSU68+AKdXwDCbxhDwR+CH0YpGUqZxURKYycIZQhWPCssBDHorqJLLHzodSx jk+OKAqTAURjt3Pqqn6BwyOXmjhsomUfJ2z01i/I062+zFTjy+6RBhqqbOPBpJ0w D34nDwunyhlha11u1dJoP2lpmujJvliTUPM0ddeZTTMbRf58LzpxtVBPSsy389uI pqC14OdUDEvlp4WX4Xkj7K2m4HpE9hYL1gF2ebnwvyS2f1Sjti1mKSYvs/cJk5nY nlivD7lmj4Cc0SDasyfqnkP9TUxF+1SNoDAImtku/ajtIGsguveU8kYZtZxKj3WO A0LZKabKH/jEvJug/aQA0l5+AdP88mGLre+WYc6xh7IxTlsXnYeLpaYOdGZ19WCQ tjpc+z+nPSszc0wQs2TsJSxQpkzcO+8qS+h9GFhBm5DREfVHR8wrsMrdxot55zvm +j9sMN8oD7RQwxtG9DUF2wzIyjKe/k9b3qbe/BApC65WsMiXdSvlhJKhvNZQs+w3 1OGeT5LJpqc= =JhWj -----END PGP SIGNATURE----- Merge tag 'for-linus-2023042601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - import a bunch of HID selftests from out-of-tree hid-tools project (Benjamin Tissoires) - drastically reducing Bluetooth disconnects on hid-nintendo driven devices (Daniel J. Ogorchock) - lazy initialization of battery interfaces in wacom driver (Jason Gerecke) - generic support for all Kye tablets (David Yang) - proper rumble queue overrun handling in hid-nintendo (Daniel J. Ogorchock) - support for ADC measurement in logitech-hidpp driver (Bastien Nocera) - reset GPIO support in i2c-hid (Hans de Goede) - improved handling of generic "Digitizer" usage (Jason Gerecke) - support for KEY_CAMERA_FOCUS (Feng Qi) - quirks for Apple Geyser 3 and Apple Geyser 4 (Alex Henrie) - assorted functional fixes and device ID additions * tag 'for-linus-2023042601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (54 commits) HID: amd_sfh: Fix max supported HID devices HID: wacom: generic: Set battery quirk only when we see battery data HID: wacom: Lazy-init batteries HID: Ignore battery for ELAN touchscreen on ROG Flow X13 GV301RA HID: asus: explicitly include linux/leds.h HID: lg-g15: explicitly include linux/leds.h HID: steelseries: explicitly include linux/leds.h HID: apple: Set the tilde quirk flag on the Geyser 3 HID: apple: explicitly include linux/leds.h HID: mcp2221: fix get and get_direction for gpio HID: mcp2221: fix report layout for gpio get HID: wacom: Set a default resolution for older tablets HID: i2c-hid-of: Add reset GPIO support to i2c-hid-of HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms HID: i2c-hid-of: Consistenly use dev local variable in probe() HID: kye: Fix rdesc for kye tablets HID: amd_sfh: Support for additional light sensor HID: amd_sfh: Handle "no sensors" enabled for SFH1.1 HID: amd_sfh: Increase sensor command timeout for SFH1.1 HID: amd_sfh: Correct the stop all command ... |
||
|
Linus Torvalds
|
5c7ecada25 |
f2fs update for 6.4-rc1
In this round, we've mainly modified to support non-power-of-two zone size, which is not required for f2fs by design. In order to avoid arch dependency, we refactored the messy rb_entry structure shared across different extent_cache. In addition to the improvement, we've also fixed several subtle bugs and error cases. Enhancement: - support non-power-of-two zone size for zoned device - remove sharing the rb_entry structure in extent cache - refactor f2fs_gc to call checkpoint in urgent condition - support iopoll Bug fix: - fix potential corruption when moving a directory - fix to avoid use-after-free for cached IPU bio - fix the folio private usage - avoid kernel warnings or panics in the cp_error case - fix to recover quota data correctly - fix some bugs in atomic operations - fix system crash due to lack of free space in LFS - fix null pointer panic in tracepoint in __replace_atomic_write_block - fix iostat lock protection - fix scheduling while atomic in decompression path - preserve direct write semantics when buffering is forced - fix to call f2fs_wait_on_page_writeback() in f2fs_write_raw_pages() -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAmRIHMMACgkQQBSofoJI UNI3Mw//eQvxUXaWtCjTJQtXPotaah6ZcvnMMtfl6Cf0Z8Sq4L9q4yQMA16MXbLU zz3cexKXIHTzqWfqFLunaj6cmH/THAY3L3fTkFhE+dx1H2IaFprGLW3H8hW/58tr j9365RPVY2d/3agB1KikTj6FQ5OTGibkZagjsC28VmQ30VLIm+4jnHdIoX92UP+k 87JQ/fbG2XAiHX/ifcVuMXY3++db9jaZahsmhdJ1LNTZzztO241RzrNoBsLcSwSZ DkPgJXARQzFNDRfveRXSbV3ygR9C62pNITtSGC86ZRLyoAmko9se+nMEFH7YEkUy Rhf0Qzq2Gy6ThiVo8ZjuLvNycF0oj3OefX1PQLT6vzkv3Sv4Yij48bN1HqPdYsKH 3hPZd2V7A3o2LCJPPPNjZ/6nuKhrX+kU33FjUrxiYqz7Lt74j70vVEHQ7vSCGkrQ YpQYVXFr1hdejdemCpwgdvcEegNlV0GfqCG5KL1f7jJiGHfvxZnOEJ3x9dCQFTIE xVoWTzw9pbmBkTudrFNVRlX2RSQYSvgLFwUhQ3WE0qNu0mUMP+4E+50iKHYraJ7R W1TajZ+ttUJAnZ076vGGEOxabefEdtReOtdstohcJlDaGm5sI9I9CXQRvY4ZSymW l7ZHY/b+/IzP+/fLEX7DgTnWip37H14FImvjYRGpSEzc6sXiOUU= =qHTl -----END PGP SIGNATURE----- Merge tag 'f2fs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs update from Jaegeuk Kim: "In this round, we've mainly modified to support non-power-of-two zone size, which is not required for f2fs by design. In order to avoid arch dependency, we refactored the messy rb_entry structure shared across different extent_cache. In addition to the improvement, we've also fixed several subtle bugs and error cases. Enhancements: - support non-power-of-two zone size for zoned device - remove sharing the rb_entry structure in extent cache - refactor f2fs_gc to call checkpoint in urgent condition - support iopoll Bug fixes: - fix potential corruption when moving a directory - fix to avoid use-after-free for cached IPU bio - fix the folio private usage - avoid kernel warnings or panics in the cp_error case - fix to recover quota data correctly - fix some bugs in atomic operations - fix system crash due to lack of free space in LFS - fix null pointer panic in tracepoint in __replace_atomic_write_block - fix iostat lock protection - fix scheduling while atomic in decompression path - preserve direct write semantics when buffering is forced - fix to call f2fs_wait_on_page_writeback() in f2fs_write_raw_pages()" * tag 'f2fs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits) f2fs: remove unnessary comment in __may_age_extent_tree f2fs: allocate node blocks for atomic write block replacement f2fs: use cow inode data when updating atomic write f2fs: remove power-of-two limitation of zoned device f2fs: allocate trace path buffer from names_cache f2fs: add has_enough_free_secs() f2fs: relax sanity check if checkpoint is corrupted f2fs: refactor f2fs_gc to call checkpoint in urgent condition f2fs: remove folio_detach_private() in .invalidate_folio and .release_folio f2fs: remove bulk remove_proc_entry() and unnecessary kobject_del() f2fs: support iopoll method f2fs: remove batched_trim_sections node description f2fs: fix to check return value of inc_valid_block_count() f2fs: fix to check return value of f2fs_do_truncate_blocks() f2fs: fix passing relative address when discard zones f2fs: fix potential corruption when moving a directory f2fs: add radix_tree_preload_end in error case f2fs: fix to recover quota data correctly f2fs: fix to check readonly condition correctly docs: f2fs: Correct instruction to disable checkpoint ... |
||
Biju Das
|
7bb985ac03 |
Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
This commit adds cascade_counts_enable and external_input_phase_ clock_select items to counter ABI file. (e.g. for Renesas MTU3 hardware used for phase counting). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230330111632.169434-4-biju.das.jz@bp.renesas.com |
||
|
Linus Torvalds
|
0cfd8703e7 |
Power management updates for 6.4-rc1
- Fix the frequency unit in cpufreq_verify_current_freq checks()
(Sanjay Chandrashekara).
- Make mode_state_machine in amd-pstate static (Tom Rix).
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar).
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang).
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring).
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu).
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny).
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada).
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno).
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring).
- Drop unnecessary (void *) conversions from the PM core (Li zeming).
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
(Mario Limonciello).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar).
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able to
process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device if
ethtool exists.
* Make the tool more robustly handle events where mangled dmesg or
ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo).
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney).
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski).
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring).
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang Li).
-----BEGIN PGP SIGNATURE-----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=p/5G
-----END PGP SIGNATURE-----
Merge tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update several cpufreq drivers and the cpufreq core, add sysfs
interface for exposing the time really spent in the platform low-power
state during suspend-to-idle, update devfreq (core and drivers) and
the pm-graph suite of tools and clean up code.
Specifics:
- Fix the frequency unit in cpufreq_verify_current_freq checks()
Sanjay Chandrashekara)
- Make mode_state_machine in amd-pstate static (Tom Rix)
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar)
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang)
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring)
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu)
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny)
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada)
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Remove MODULE_LICENSE in non-modules (Nick Alcock)
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss)
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson)
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski)
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno)
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring)
- Drop unnecessary (void *) conversions from the PM core (Li zeming)
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
Mario Limonciello)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar)
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able
to process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device
if ethtool exists.
* Make the tool more robustly handle events where mangled dmesg
or ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo)
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney)
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski)
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring)
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang
Li)"
* tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
platform/x86/intel/pmc: core: Report duration of time in HW sleep state
platform/x86/intel/pmc: core: Always capture counters on suspend
platform/x86/amd: pmc: Report duration of time in hw sleep state
PM: Add sysfs files to represent time spent in hardware sleep state
cpufreq: use correct unit when verify cur freq
cpufreq: tegra194: add OPP support and set bandwidth
cpufreq: amd-pstate: Make varaiable mode_state_machine static
PM: core: Remove unnecessary (void *) conversions
cpufreq: drivers with target_index() must set freq_table
PM / devfreq: exynos-ppmu: Use devm_platform_get_and_ioremap_resource()
OPP: Move required opps configuration to specialized callback
OPP: Handle all genpd cases together in _set_required_opps()
cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290
dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain
cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist
cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit
cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623
cpufreq: mediatek: raise proc/sram max voltage for MT8516
...
|
||
|
Linus Torvalds
|
088e0c1885 |
platform-drivers-x86 for v6.4-1
Highlights:
- AMD PMC and PMF drivers:
- Numerous bugfixes
- Intel Speed Select Technology (ISST):
- TPMI (Topology Aware Register and PM Capsule Interface) support
for ISST support on upcoming processor models
- Various other improvements / new hw support
- tools/intel-speed-select: TPMI support + other improvements
- Intel In Field Scan (IFS):
- Add Array Bist test support
- New drivers:
- intel_bytcrc_pwrsrc Crystal Cove PMIC pwrsrc / reset-reason driver
- lenovo-ymc Yoga Mode Control driver for reporting SW_TABLET_MODE
- msi-ec Driver for MSI laptop EC features like battery charging limits
- apple-gmux:
- Support for new MMIO based models (T2 Macs)
- Honor acpi_backlight= auto-detect-code + kernel cmdline option
to switch between gmux and apple_bl backlight drivers and remove
own custom handling for this
- x86-android-tablets: Refactor / cleanup + new hw support
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
Add driver for Yoga Tablet Mode switch:
- Add driver for Yoga Tablet Mode switch
Add intel_bytcrc_pwrsrc driver:
- Add intel_bytcrc_pwrsrc driver
Add new msi-ec driver:
- Add new msi-ec driver
Documentation/ABI:
- Update IFS ABI doc
ISST:
- unlock on error path in tpmi_sst_init()
- Add suspend/resume callbacks
- Add SST-TF support via TPMI
- Add SST-BF support via TPMI
- Add SST-PP support via TPMI
- Add SST-CP support via TPMI
- Parse SST MMIO and update instance
- Enumerate TPMI SST and create framework
- Add support for MSR 0x54
- Add API version of the target
- Add IOCTL default callback
- Add TPMI target
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge tag 'ib-pdx86-backlight-6.4' into review-hans:
- Merge tag 'ib-pdx86-backlight-6.4' into review-hans
Move ideapad ACPI helpers to a new header:
- Move ideapad ACPI helpers to a new header
acer-wmi:
- Convert to platform remove callback returning void
acerhdf:
- Remove unneeded semicolon
adv_swbutton:
- Convert to platform remove callback returning void
amilo-rfkill:
- Convert to platform remove callback returning void
apple-gmux:
- Fix iomem_base __iomem annotation
- return -EFAULT if copy fails
- Update apple_gmux_detect documentation
- Add acpi_video_get_backlight_type() check
- add debugfs interface
- support MMIO gmux on T2 Macs
- refactor gmux types
- use first bit to check switch state
backlight:
- apple_bl: Use acpi_video_get_backlight_type()
barco-p50-gpio:
- Convert to platform remove callback returning void
classmate:
- mark SPI related data as maybe unused
compal-laptop:
- Convert to platform remove callback returning void
dell:
- dell-smo8800: Convert to platform remove callback returning void
- dcdbas: Convert to platform remove callback returning void
dell-laptop:
- Register ctl-led for speaker-mute
hp:
- tc1100-wmi: Convert to platform remove callback returning void
- hp_accel: Convert to platform remove callback returning void
huawei-wmi:
- Convert to platform remove callback returning void
ideapad-laptop:
- Convert to platform remove callback returning void
intel:
- vbtn: Convert to platform remove callback returning void
- telemetry: pltdrv: Convert to platform remove callback returning void
- pmc: core: Convert to platform remove callback returning void
- mrfld_pwrbtn: Convert to platform remove callback returning void
- int3472: discrete: Convert to platform remove callback returning void
- int1092: intel_sar: Convert to platform remove callback returning void
- int0002_vgpio: Convert to platform remove callback returning void
- hid: Convert to platform remove callback returning void
- chtwc_int33fe: Convert to platform remove callback returning void
- chtdc_ti_pwrbtn: Convert to platform remove callback returning void
- bxtwc_tmu: Convert to platform remove callback returning void
intel-uncore-freq:
- Add client processors
mlxbf-bootctl:
- Add sysfs file for BlueField boot fifo
pcengines-apuv2:
- Drop platform:pcengines-apuv2 module-alias
platform/mellanox:
- add firmware reset support
platform/olpc:
- olpc-xo175-ec: Use SPI device ID data to bind device
platform/surface:
- aggregator_registry: Add support for tablet-mode switch on Surface Pro 9
- aggregator_tabletsw: Add support for Type-Cover posture source
- aggregator_tabletsw: Properly handle different posture source IDs
platform/x86/amd:
- pmc: provide user message where s0ix is not supported
- pmc: Remove __maybe_unused from amd_pmc_suspend_handler()
- pmc: Convert to platform remove callback returning void
- pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2()
- pmc: Move out of BIOS SMN pair for STB init
- pmc: Utilize SMN index 0 for driver probe
- pmc: Move idlemask check into `amd_pmc_idlemask_read`
- pmc: Don't dump data after resume from s0i3 on picasso
- pmc: Hide SMU version and program attributes for Picasso
- pmc: Don't try to read SMU version on Picasso
- pmf: core: Convert to platform remove callback returning void
- hsmp: Convert to platform remove callback returning void
platform/x86/amd/pmf:
- Move out of BIOS SMN pair for driver probe
platform/x86/intel:
- vsec: Use intel_vsec_dev_release() to simplify init() error cleanup
- vsec: Explicitly enable capabilities
platform/x86/intel/ifs:
- Update IFS doc
- Implement Array BIST test
- Sysfs interface for Array BIST
- Introduce Array Scan test to IFS
- IFS cleanup
- Reorganize driver data
- Separate ifs_pkg_auth from ifs_data
platform/x86/intel/pmc/mtl:
- Put GNA/IPU/VPU devices in D3
platform/x86/intel/pmt:
- Ignore uninitialized entries
- Add INTEL_PMT module namespace
platform/x86/intel/sdsi:
- Change mailbox timeout
samsung-q10:
- Convert to platform remove callback returning void
serial-multi-instantiate:
- Convert to platform remove callback returning void
sony:
- mark SPI related data as maybe unused
think-lmi:
- Remove unnecessary casts for attributes
- Remove custom kobject sysfs_ops
- Properly interpret return value of tlmi_setting
thinkpad_acpi:
- Fix Embedded Controller access on X380 Yoga
tools/power/x86/intel-speed-select:
- Update version
- Change TRL display for Emerald Rapids
- Identify Emerald Rapids
- Display AMX base frequency
- Use cgroup v2 isolation
- Add missing free cpuset
- Fix clos-max display with TPMI I/F
- Add cpu id check
- Avoid setting duplicate tdp level
- Remove cpu mask display for non-cpu power domain
- Hide invalid TRL level
- Display fact info for non-cpu power domain
- Show level 0 name for new api_version
- Prevent cpu clos config for non-cpu power domain
- Allow display non-cpu power domain info
- Display amx_p1 and cooling_type
- Display punit info
- Introduce TPMI interface support
- Get punit core mapping information
- Introduce api_version helper
- Support large clos_min/max
- Introduce is_debug_enabled()
- Allow api_version based platform callbacks
- Move send_mbox_cmd to isst-core-mbox.c
- Abstract adjust_uncore_freq
- Abstract read_pm_config
- Abstract clos_associate
- Abstract clos_get_assoc_status
- Abstract set_clos
- Abstract pm_get_clos
- Abstract pm_qos_config
- Abstract get_clos_information
- Abstract get_get_trls
- Enhance get_tdp_info
- Abstract get_uncore_p0_p1_info
- Abstract get_fact_info
- Abstract set_pbf_fact_status
- Remove isst_get_pbf_info_complete
- Abstract get_pbf_info
- Abstract set_tdp_level
- Abstract get_trl_bucket_info
- Abstract get_get_trl
- Abstract get_coremask_info
- Abstract get_tjmax_info
- Move code right before its caller
- Abstract get_pwr_info
- Abstract get_tdp_info
- Abstract get_ctdp_control
- Abstract get_config_levels
- Abstract is_punit_valid
- Introduce isst-core-mbox.c
- Always invoke isst_fill_platform_info
- Introduce isst_get_disp_freq_multiplier
- Move mbox functions to isst-core.c
- Improve isst_print_extended_platform_info
- Rename for_each_online_package_in_set
- Introduce support for multi-punit
- Introduce isst_is_punit_valid()
- Introduce punit to isst_id
- Follow TRL nameing for FACT info
- Unify TRL levels
wmi:
- Convert to platform remove callback returning void
x86-android-tablets:
- Add accelerometer support for Yoga Tablet 2 1050/830 series
- Add "yogabook-touch-kbd-digitizer-switch" pdev for Lenovo Yoga Book
- Add Wacom digitizer info for Lenovo Yoga Book
- Update Yoga Book HiDeep touchscreen comment
- Add Lenovo Yoga Book X90F/L data
- Share lp855x_platform_data between different models
- Use LP8557 in direct mode on both the Yoga 830 and the 1050
- Add depends on PMIC_OPREGION
- Lenovo Yoga Book match is for YB1-X91 models only
- Add LID switch support for Yoga Tablet 2 1050/830 series
- Add backlight ctrl for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add touchscreen support for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add support for the Dolby button on Peaq C1010
- Add gpio_keys support to x86_android_tablet_init()
- Move remaining tablets to other.c
- Move Lenovo tablets to their own file
- Move Asus tablets to their own file
- Move shared power-supply fw-nodes to a separate file
- Move DMI match table into its own dmi.c file
- Move core code into new core.c file
- Move into its own subdir
- Add Acer Iconia One 7 B1-750 data
x86/include/asm/msr-index.h:
- Add IFS Array test bits
xo1-rfkill:
- Convert to platform remove callback returning void
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmRGmK4UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yBCAf+PebzfccC2ABHq+nFGSok18beRtFf
fGs9NI21Mjdbhhy+KsKddgZceh7pbdcaIznuka3TZAK0UXcHRe30X3eoDvSCk9YW
Xj/Uf3ExsipNh1Ung+Q1qTWtzUw7XdJWqMZ5HxlUI2ZlmSTAIOyZBpSEPrK052oi
lAbSqrnB1DEh1qYV4Q7g71R82iAR791DAH1dsDZwC1Zb6KK6fxI/zQhw4JP1XSCs
htE5RFUzPWiXG2ou5t6Nteju/QqEaCoIS7z7ZK/SgWcLlPxeksxwso3obI/U8PvD
JMmMiY4VFzizuGqTZHiy/EtKXo1pq+fOcMEqSuaaDfcYgdHmLm0OIU12Ig==
=51xc
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD PMC and PMF drivers:
- Numerous bugfixes
- Intel Speed Select Technology (ISST):
- TPMI (Topology Aware Register and PM Capsule Interface) support
for ISST support on upcoming processor models
- Various other improvements / new hw support
- tools/intel-speed-select: TPMI support + other improvements
- Intel In Field Scan (IFS):
- Add Array Bist test support
- New drivers:
- intel_bytcrc_pwrsrc Crystal Cove PMIC pwrsrc / reset-reason driver
- lenovo-ymc Yoga Mode Control driver for reporting SW_TABLET_MODE
- msi-ec Driver for MSI laptop EC features like battery charging limits
- apple-gmux:
- Support for new MMIO based models (T2 Macs)
- Honor acpi_backlight= auto-detect-code + kernel cmdline option
to switch between gmux and apple_bl backlight drivers and remove
own custom handling for this
- x86-android-tablets: Refactor / cleanup + new hw support
- Miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (178 commits)
platform/x86: x86-android-tablets: Add accelerometer support for Yoga Tablet 2 1050/830 series
platform/x86: x86-android-tablets: Add "yogabook-touch-kbd-digitizer-switch" pdev for Lenovo Yoga Book
platform/x86: x86-android-tablets: Add Wacom digitizer info for Lenovo Yoga Book
platform/x86: x86-android-tablets: Update Yoga Book HiDeep touchscreen comment
platform/x86: thinkpad_acpi: Fix Embedded Controller access on X380 Yoga
platform/x86/intel/sdsi: Change mailbox timeout
platform/x86/intel/pmt: Ignore uninitialized entries
platform/x86: amd: pmc: provide user message where s0ix is not supported
platform/x86/amd: pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2()
mlxbf-bootctl: Add sysfs file for BlueField boot fifo
platform/x86: amd: pmc: Remove __maybe_unused from amd_pmc_suspend_handler()
platform/x86/intel/pmc/mtl: Put GNA/IPU/VPU devices in D3
platform/x86/amd: pmc: Move out of BIOS SMN pair for STB init
platform/x86/amd: pmc: Utilize SMN index 0 for driver probe
platform/x86/amd: pmc: Move idlemask check into `amd_pmc_idlemask_read`
platform/x86/amd: pmc: Don't dump data after resume from s0i3 on picasso
platform/x86/amd: pmc: Hide SMU version and program attributes for Picasso
platform/x86/amd: pmc: Don't try to read SMU version on Picasso
platform/x86/amd/pmf: Move out of BIOS SMN pair for driver probe
platform/x86: intel-uncore-freq: Add client processors
...
|
||
Alison Schofield
|
50d527f52c |
cxl/mem: Add debugfs attributes for poison inject and clear
Inject and Clear Poison commands are optionally supported by CXL memdev devices and are intended for use in debug environments only. Add debugfs attributes for user access. Documentation/ABI/testing/debugfs-cxl describes the usage. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/0c9ea8e671b8e58465d18722788b60d325c675c7.1681874357.git.alison.schofield@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Alison Schofield
|
7ff6ad1075 |
cxl/memdev: Add trigger_poison_list sysfs attribute
When a boolean 'true' is written to this attribute the memdev driver retrieves the poison list from the device. The list consists of addresses that are poisoned, or would result in poison if accessed, and the source of the poison. This attribute is only visible for devices supporting the capability. The retrieved errors are logged as kernel events when cxl_poison event tracing is enabled. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/1081cfdc8a349dc754779642d584707e56db26ba.1681838291.git.alison.schofield@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
Stefan Roesch
|
d21077fbc2 |
mm: add new KSM process and sysfs knobs
This adds the general_profit KSM sysfs knob and the process profit metric knobs to ksm_stat. 1) expose general_profit metric The documentation mentions a general profit metric, however this metric is not calculated. In addition the formula depends on the size of internal structures, which makes it more difficult for an administrator to make the calculation. Adding the metric for a better user experience. 2) document general_profit sysfs knob 3) calculate ksm process profit metric The ksm documentation mentions the process profit metric and how to calculate it. This adds the calculation of the metric. 4) mm: expose ksm process profit metric in ksm_stat This exposes the ksm process profit metric in /proc/<pid>/ksm_stat. The documentation mentions the formula for the ksm process profit metric, however it does not calculate it. In addition the formula depends on the size of internal structures. So it makes sense to expose it. 5) document new procfs ksm knobs Link: https://lkml.kernel.org/r/20230418051342.1919757-3-shr@devkernel.io Signed-off-by: Stefan Roesch <shr@devkernel.io> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Mario Limonciello
|
b52124a78a |
PM: Add sysfs files to represent time spent in hardware sleep state
Userspace can't easily discover how much of a sleep cycle was spent in a hardware sleep state without using kernel tracing and vendor specific sysfs or debugfs files. To make this information more discoverable, introduce 3 new sysfs files: 1) The time spent in a hw sleep state for last cycle. 2) The time spent in a hw sleep state since the kernel booted 3) The maximum time that the hardware can report for a sleep cycle. All of these files will be present only if the system supports s2idle. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Liming Sun
|
82c3a0b7f0 |
mlxbf-bootctl: Add sysfs file for BlueField boot fifo
This commit adds sysfs file for BlueField boot fifo. The boot fifo is usually used to push boot stream via USB or PCIe. Once OS is up, it can be reused by applications to read data or configuration from external host. Signed-off-by: Liming Sun <limings@nvidia.com> Reviewed-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/52b0b00dacbc4aad3169dd3667d79c85e334783b.1680657571.git.limings@nvidia.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
Yangtao Li
|
abae448626 |
f2fs: remove batched_trim_sections node description
It's deprecated since commit
|
||
Greg Kroah-Hartman
|
fba51482b6 |
1st set of IIO new device support, features and cleanups for the 6.4 cycle.
New device support
* bosch,bmp280
- Add support for BMP580 - includes significant refactoring and general
driver cleanup + support for non-volatile memory for trimming and config
parameters.
* rohm BU27034
- New driver for this 3 channel ambient light sensor.
- New support library for devices where both integration time and
amplifier gain are configurable. In these cases a scale change
may require changing bother underlying values. This library module
provides code to help with this.
* st,accel
- Add support for IIS328DQ (ID only as compatible wtih LIS331DL)
* st,lsm6dsx
- Add support for ASM330LHB automotive MEMS sensor.
* ti,ads1100, ads1000
- New driver for these 16 bit ADCs.
* ti,tmp117
- Add support for older tmp116 device. Includes some general driver cleanup.
Staging driver drops
* adi,ade7854
- Driver was a very long way from compliant with IIO infrastructure and ABI.
If anyone wants a non staging version of this driver they are better off
starting from scratch. Hence drop it and the associated meter.h header.
Features
* adi,ad7441r
- Add DT binding to set sink current for digital input.
* semtech,sx9324,9360
- Support older register mapping from firmware designed for windows.
Core improvements.
* Move iio_trigger_poll() docs to next to the implementation and add a note
on expected caller context.
* Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so
as to use more standard / common terminology.
* Improve main ABI docs references to offset and scale for raw values by
making them consistent and clear.
Cleanups and minor fixes:
* adi,ad5592r
- Add GPIO names - useful for debug.
* adi,ad7441r
- Fix current input, loop powered mode configuration setup.
* adi,adis16475
- Fix wrong commented value for minimum advised lower rate.
* adi,admv1013
- Use devm_clk_get_enabled() to reduce boilerplate.
* adi,ads1210
- Fix wrong bits for writing config register (late fix and has
been broken a long time so not rushed upstream)
* amlogic,meson-saradc
- Improve cleanup in error handling if BL30 handshake fails.
* apex-embedded,stx104
- Migrate to regmap and use regmap_read_poll_timeout() to neatly handle
retries.
- Add local mutex to close various races.
- Use define U16_MAX rather than value for limit.
- Improve code readability with minor reorganization.
* atmel,ad91-sama5d2
- Drop trivial dead code.
* kionix,kx022a
- Drop unused structure element.
* linear,ltc2983
- Reorganize bindings doc to enable unevaluatedProperties to be set
in one place for all child nodes.
- Make binding for adi,custom-thermocouple accept signed values.
* maxim,max44000
- Add OF Device matching (of_match_table was not correctly set).
* maxim,max5522
- Missing static
* measurement-computing,cio-dac
- Fix wrong part name in comments.
- Migrate to regmap.
- Improve includes by replacing bitops.h with more direct bits.h
* qcom,pm8xxx-xoadc
- Remove a check that can never fail.
* renesas,rcar-gyroadc
- DT binding documentation improvements.
- Tidy up an unused warning with __maybe_unused.
* semtech,sx_common
- Drop docs for a structure element that doesn't exist.
* semtech,sx9500
- Drop ACPI_PTR() and of_match_ptr() protections that just complicate
the code / block some firmware registration types that would otherwise
work.
* sensiron,sps30
- Comment formatting tidy up.
* st,sensors
- Drop duplicate text in DT binding.
* st,stm32-adc
- Add some missing static markings.
* ti,ads1100
- Use correct return code in dev_err_probe() call.
* x-powers,axp20x_adc - precursor series to simplify addition of AXP192.
- General code cleanup / minor refactoring for better readabilty of code.
- Switch from boolean value to mask for adc_en2 field to avoid hard coding
a mask that will be different in AXP192
-----BEGIN PGP SIGNATURE-----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=xxs6
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanups for the 6.4 cycle.
New device support
* bosch,bmp280
- Add support for BMP580 - includes significant refactoring and general
driver cleanup + support for non-volatile memory for trimming and config
parameters.
* rohm BU27034
- New driver for this 3 channel ambient light sensor.
- New support library for devices where both integration time and
amplifier gain are configurable. In these cases a scale change
may require changing bother underlying values. This library module
provides code to help with this.
* st,accel
- Add support for IIS328DQ (ID only as compatible wtih LIS331DL)
* st,lsm6dsx
- Add support for ASM330LHB automotive MEMS sensor.
* ti,ads1100, ads1000
- New driver for these 16 bit ADCs.
* ti,tmp117
- Add support for older tmp116 device. Includes some general driver cleanup.
Staging driver drops
* adi,ade7854
- Driver was a very long way from compliant with IIO infrastructure and ABI.
If anyone wants a non staging version of this driver they are better off
starting from scratch. Hence drop it and the associated meter.h header.
Features
* adi,ad7441r
- Add DT binding to set sink current for digital input.
* semtech,sx9324,9360
- Support older register mapping from firmware designed for windows.
Core improvements.
* Move iio_trigger_poll() docs to next to the implementation and add a note
on expected caller context.
* Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so
as to use more standard / common terminology.
* Improve main ABI docs references to offset and scale for raw values by
making them consistent and clear.
Cleanups and minor fixes:
* adi,ad5592r
- Add GPIO names - useful for debug.
* adi,ad7441r
- Fix current input, loop powered mode configuration setup.
* adi,adis16475
- Fix wrong commented value for minimum advised lower rate.
* adi,admv1013
- Use devm_clk_get_enabled() to reduce boilerplate.
* adi,ads1210
- Fix wrong bits for writing config register (late fix and has
been broken a long time so not rushed upstream)
* amlogic,meson-saradc
- Improve cleanup in error handling if BL30 handshake fails.
* apex-embedded,stx104
- Migrate to regmap and use regmap_read_poll_timeout() to neatly handle
retries.
- Add local mutex to close various races.
- Use define U16_MAX rather than value for limit.
- Improve code readability with minor reorganization.
* atmel,ad91-sama5d2
- Drop trivial dead code.
* kionix,kx022a
- Drop unused structure element.
* linear,ltc2983
- Reorganize bindings doc to enable unevaluatedProperties to be set
in one place for all child nodes.
- Make binding for adi,custom-thermocouple accept signed values.
* maxim,max44000
- Add OF Device matching (of_match_table was not correctly set).
* maxim,max5522
- Missing static
* measurement-computing,cio-dac
- Fix wrong part name in comments.
- Migrate to regmap.
- Improve includes by replacing bitops.h with more direct bits.h
* qcom,pm8xxx-xoadc
- Remove a check that can never fail.
* renesas,rcar-gyroadc
- DT binding documentation improvements.
- Tidy up an unused warning with __maybe_unused.
* semtech,sx_common
- Drop docs for a structure element that doesn't exist.
* semtech,sx9500
- Drop ACPI_PTR() and of_match_ptr() protections that just complicate
the code / block some firmware registration types that would otherwise
work.
* sensiron,sps30
- Comment formatting tidy up.
* st,sensors
- Drop duplicate text in DT binding.
* st,stm32-adc
- Add some missing static markings.
* ti,ads1100
- Use correct return code in dev_err_probe() call.
* x-powers,axp20x_adc - precursor series to simplify addition of AXP192.
- General code cleanup / minor refactoring for better readabilty of code.
- Switch from boolean value to mask for adc_en2 field to avoid hard coding
a mask that will be different in AXP192
* tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits)
MAINTAINERS: Add ROHM BU27034
iio: light: ROHM BU27034 Ambient Light Sensor
dt-bindings: iio: light: Support ROHM BU27034
MAINTAINERS: Add IIO gain-time-scale helpers
iio: light: Add gain-time-scale helpers
doc: Make sysfs-bus-iio doc more exact
iio: dac: set variable max5522_channels storage-class-specifier to static
dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed
dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties
iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll
iio: addac: stx104: Migrate to the regmap API
iio: addac: stx104: Improve indentation in stx104_write_raw()
iio: addac: stx104: Use define rather than hardcoded limit for write val
iio: addac: stx104: Fix race condition when converting analog-to-digital
iio: addac: stx104: Fix race condition for stx104_write_raw()
dt-bindings: iio: st-sensors: Fix repeated text
staging: iio: resolver: ads1210: fix config mode
iio: adc: ti-ads1100: fix error code in probe()
iio: accel: add support for IIS328DQ variant
dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer
...
|
||
Matti Vaittinen
|
b27f0b40e4 |
doc: Make sysfs-bus-iio doc more exact
A few IIC channel descriptions explained used units as: data is in foo "that can be processed into an" [unit] value. The "can be processed into" is quite broad statement as it does not really explain what this processing means. This makes units pretty much useless. After discussion with Jonathan, it seems the units for these channels should also be well-defined as for all other channels. The processing means the standard scale and offset application that is used throughout the IIO. Let's make it more obvious by stating that the units are [unit] after scale ane offset are applied. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/41eafb0caa510cddf650cf5ff940639a184f3005.1677331779.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Ashutosh Dixit
|
4ed22f1e52 |
drm/i915/hwmon: Use 0 to designate disabled PL1 power limit
On ATSM the PL1 limit is disabled at power up. The previous uapi assumed
that the PL1 limit is always enabled and therefore did not have a notion of
a disabled PL1 limit. This results in erroneous PL1 limit values when the
PL1 limit is disabled. For example at power up, the disabled ATSM PL1 limit
was previously shown as 0 which means a low PL1 limit whereas the limit
being disabled actually implies a high effective PL1 limit value.
To get round this problem, the PL1 limit uapi is expanded to include a
special value 0 to designate a disabled PL1 limit. A read value of 0 means
that the PL1 power limit is disabled, writing 0 disables the limit.
The link between this patch and the bugs mentioned below is as follows:
* Because on ATSM the PL1 power limit is disabled on power up and there
were no means to enable it, we previously implemented the means to
enable the limit when the PL1 hwmon entry (power1_max) was written to.
* Now there is a IGT igt@i915_hwmon@hwmon_write which (a) reads orig value
from all hwmon sysfs (b) does a bunch of random writes and finally (c)
restores the orig value read. On ATSM since the orig value is 0, when
the IGT restores the 0 value, the PL1 limit is now enabled with a value
of 0.
* PL1 limit of 0 implies a low PL1 limit which causes GPU freq to fall to
100 MHz. This causes GuC FW load and several IGT's to start timing out
and gives rise to these Intel CI bugs. After this patch, writing 0 would
disable the PL1 limit instead of enabling it, avoiding the freq drop
issue.
v2: Add explanation for bugs mentioned below (Rodrigo)
v3: Eliminate race during PL1 disable and verify (Tvrtko)
Change return to -ENODEV if verify fails (Tvrtko)
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8062
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8060
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230401024146.1826092-1-ashutosh.dixit@intel.com
|
||
Bastien Nocera
|
f98e0640c5 |
USB: core: Add wireless_status sysfs attribute
Add a wireless_status sysfs attribute to USB devices to keep track of whether a USB device that's comprised of a receiver dongle and an emitter device over a, most of the time proprietary, wireless link has its emitter connected or disconnected. This will be used by user-space OS components to determine whether the battery-powered part of the device is wirelessly connected or not, allowing, for example: - upower to hide the battery for devices where the device is turned off but the receiver plugged in, rather than showing 0%, or other values that could be confusing to users - Pipewire to hide a headset from the list of possible inputs or outputs or route audio appropriately if the headset is suddenly turned off, or turned on - libinput to determine whether a keyboard or mouse is present when its receiver is plugged in. This is done at the USB interface level as: - the interface on which the wireless status is detected is sometimes not the same as where it could be consumed (eg. the audio interface on a headset dongle will still appear even if the headset is turned off), and we cannot have synchronisation of status across subsystems. - this behaviour is not specific to HID devices, even if the protocols used to determine whether or not the remote device is connected can be HID. This is not an attribute that is meant to replace protocol specific APIs, such as the ones available for WWAN, WLAN/Wi-Fi, or Bluetooth or any other sort of networking, but solely for wireless devices with an ad-hoc “lose it and your device is e-waste” receiver dongle. The USB interface will only be exporting the wireless_status sysfs attribute if it gets set through the API exported in the next commit. Signed-off-by: Bastien Nocera <hadess@hadess.net> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230302105555.51417-4-hadess@hadess.net Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> |
||
|
Yangtao Li
|
960fa2c828 |
f2fs: export compress_percent and compress_watermark entries
This patch export below sysfs entries for better control cached compress page count. /sys/fs/f2fs/<disk>/compress_watermark /sys/fs/f2fs/<disk>/compress_percent Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Nipun Gupta
|
48a6c7bced |
cdx: add device attributes
Create sysfs entry for CDX devices. Sysfs entries provided in each of the CDX device detected by the CDX controller - vendor id - device id - remove - reset of the device. - driver override Signed-off-by: Puneet Gupta <puneet.gupta@amd.com> Signed-off-by: Nipun Gupta <nipun.gupta@amd.com> Signed-off-by: Tarak Reddy <tarak.reddy@amd.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com> Link: https://lore.kernel.org/r/20230313132636.31850-8-nipun.gupta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Nipun Gupta
|
2959ab2470 |
cdx: add the cdx bus driver
Introduce AMD CDX bus, which provides a mechanism for scanning and probing CDX devices. These devices are memory mapped on system bus for Application Processors(APUs). CDX devices can be changed dynamically in the Fabric and CDX bus interacts with CDX controller to rescan the bus and rediscover the devices. Signed-off-by: Nipun Gupta <nipun.gupta@amd.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com> Link: https://lore.kernel.org/r/20230313132636.31850-2-nipun.gupta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Daniel Scally
|
7bf1c56a90 |
usb: gadget: uvc: Make bmControls attr read/write
For the Processing Unit and Camera Terminal descriptors defined in the UVC Gadget we currently hard-code values into their bmControls fields, which enumerates which controls the gadget is able to support. This isn't appropriate since only the userspace companion program to the kernel driver will know which controls are supported. Make the configfs attributes that point to those fields read/write so userspace can set them to appropriate values. Document the new behaviour at the same time so the functionality is clear. Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Link: https://lore.kernel.org/r/20230309105825.216745-1-dan.scally@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Jithu Joseph
|
3a2f2756c5 |
Documentation/ABI: Update IFS ABI doc
Array BIST test doesn't need an IFS test image to operate unlike the SCAN test. Consequently current_batch and image_version files are not applicable for Array BIST IFS device instance, clarify this in the ABI doc. Also given that multiple tests are supported, take the opportunity to generalize descriptions wherever applicable. Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20230322003359.213046-10-jithu.joseph@intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
Mathias Nyman
|
edf1664f32 |
xhci: dbc: Provide sysfs option to configure dbc descriptors
When DbC is enabled the first port on the xHC host acts as a usb device. xHC provides the descriptors automatically when the DbC device is enumerated. Most of the values are hardcoded, but some fields such as idProduct, idVendor, bcdDevice and bInterfaceProtocol can be modified. Add sysfs entries that allow userspace to change these. User can only change them before dbc is enabled, i.e. before writing "enable" to dbc sysfs file as we don't want these values to change while device is connected, or during enumeration. Add documentation for these entries in Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-9-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Lu Baolu
|
4c8444f19e |
iommu: Cleanup iommu_change_dev_def_domain()
As the singleton group limitation has been removed, cleanup the code in iommu_change_dev_def_domain() accordingly. Documentation is also updated. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20230322064956.263419-7-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
Quan Nguyen
|
c2c99326cc |
misc: smpro-errmon: Add dimm training failure syndrome
Adds event_dimm[0-15]_syndrome sysfs to report the failure syndrome to BMC when DIMM training failed. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Link: https://lore.kernel.org/r/20230310083416.3670980-3-quan@os.amperecomputing.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Quan Nguyen
|
b0f64c80cb |
misc: smpro-errmon: Add DIMM 2x Refresh rate event
In high temperature condition, JEDEC spec requires memory controller to double the refresh rate. This commit adds event_dimm_2x_refresh sysfs to report that events for all memory channels. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Link: https://lore.kernel.org/r/20230310083416.3670980-2-quan@os.amperecomputing.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Saravana Kannan
|
f8fb576658 |
driver core: Make state_synced device attribute writeable
If the file is written to and sync_state() hasn't been called for the device yet, then call sync_state() for the device independent of the state of its consumers. This is useful for supplier devices that have one or more consumers that don't have a driver but the consumers are in a state that don't use the resources supplied by the supplier device. This gives finer grained control than using the fw_devlink.sync_state=timeout kernel commandline parameter. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20230304005355.746421-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Nava kishore Manne
|
995a3bb721 |
fpga: zynqmp-fpga: Adds status interface
Adds status interface for zynqmp-fpga. It's a read only interface which allows the user to get the Programmable Logic(PL) configuration status. Usage: To read the Programmable Logic(PL) configuration status. cat /sys/bus/platform/drivers/zynqmp_fpga_manager/firmware:zynqmp-firmware:pcap/status Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com> Acked-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/20230224120738.329416-3-nava.kishore.manne@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Linus Torvalds
|
0988a0ea79 |
power supply changes for the v6.3 series (part 2)
- Fix DT binding for Richtek RT9467 - Fix a NULL pointer check in the power-supply core - Document meaning of absent "present" property -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAmQCjCEACgkQ2O7X88g7 +pq+WA/+MQe1ft5IUsQEtgnvf3SGiNZa3NMeSiD07wLWAilVKzD4nvNJB824Q85u f/2J35ri93Sb1NxApHspCKXGHwaDJ6LMrxBuBkyHPT5PFv8wwAXZzXAJpSw5phKm zbto72CLvG4CyFMtkV1OR10p/OtldQsy6RC6HF1tuecD44VCgU9KO00wlw5ckSzH 8GRKVFr6f12ehS9CYvM5HBZJ75M32L2FfJZ+cj4RjOYe/RFI7QNz46Q9HxXm2YMW p5R4NoyO31I1d0uSII7GtzhRvrb2Ryct7YmgeCwURMEhZZLqFU/P93+E/FD1rNmd CNJjoB2iYTBTAHTeLzy1QcCHn5JNuk2YIfCrSHVvbeYbuEkRVKBwMKzl6248fkRW B393r1n52V9eDGh9ZNawcx6CRbGEQNgAg9mg7W8MAl9qtlm3cgeRZm4NL6MMMMdB /PRokeYeW1tutdN0CSv/vNS0UC0fS7QYZNP3rLsmh14VrmkJSc5RN1m3Ryq2A+Vd VU7KZEp/48R4fqpAs/MfQdn6Hr+ovZNav+Ud8mM5VcAycpVUrCkiZ3w7g/8E4kVt OoCEO0u5kpqxSCtxKlvXrvQeQgmdakJWTyvWDQP8g6ajtH4QQVZ4vGFguMW744lR 3CZO5OuNM2XPjw0tM/bs4NlfEoZHMkVlCprW+fGtU4pL9vy4EeA= =2K3C -----END PGP SIGNATURE----- Merge tag 'for-v6.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull more power supply updates from Sebastian Reichel: - Fix DT binding for Richtek RT9467 - Fix a NULL pointer check in the power-supply core - Document meaning of absent "present" property * tag 'for-v6.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: dt-bindings: power: supply: Revise Richtek RT9467 compatible name ABI: testing: sysfs-class-power: Document absence of "present" property power: supply: fix null pointer check order in __power_supply_register |
||
|
Linus Torvalds
|
a9a01e1238 |
linux-watchdog 6.3-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAmQAOqgACgkQ+iyteGJfRsp8pACgiXMppnKQzfIW2Shx/KqzyIcj eGsAoIB75OZuzqCvOGfjMG5+NJZHqcYl =RZVA -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-6.3-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - qcom-wdt dt-bindings improvements and additions (like MSM8994 and MDM9615) - mtk_wdt: Add reset_by_toprgu support - devm_clk_get_enabled() helper changes - Fix kmemleak in watchdog_cdev_register - watchdog sysfs improvements - Other fixes and small improvements * tag 'linux-watchdog-6.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (52 commits) watchdog: at91rm9200: Only warn once about problems in .remove() watchdog: mt7621-wdt: avoid ralink architecture dependent code watchdog: mt7621-wdt: avoid static global declarations dt-bindings: watchdog: mt7621-wdt: add phandle to access system controller registers watchdog: sbsa_wdog: Make sure the timeout programming is within the limits dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-sa8775p compatible watchdog: report options in sysfs watchdog: report fw_version in sysfs dt-bindings: watchdog: fsl-imx: document suspend in wait mode watchdog: imx2_wdg: suspend watchdog in WAIT mode watchdog: pcwd_usb: Fix attempting to access uninitialized memory dt-bindings: watchdog: qcom-wdt: merge MSM timer dt-bindings: watchdog: qcom-wdt: allow interrupts dt-bindings: watchdog: qcom-wdt: add qcom,kpss-wdt-mdm9615 dt-bindings: watchdog: qcom-wdt: fix list of MSM timer compatibles dt-bindings: watchdog: qcom-wdt: do not allow fallback alone dt-bindings: watchdog: qcom-wdt: require fallback for IPQ4019 watchdog: Fix kmemleak in watchdog_cdev_register watchdog: Include <linux/kstrtox.h> when appropriate watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in error path ... |
||
|
Linus Torvalds
|
103830683c |
f2fs-for-6.3-rc1
In this round, we've got a huge number of patches that improve code readability
along with minor bug fixes, while we've mainly fixed some critical issues in
recently-added per-block age-based extent_cache, atomic write support, and some
folio cases.
Enhancement:
- add sysfs nodes to set last_age_weight and manage discard_io_aware_gran
- show ipu policy in debugfs
- reduce stack memory cost by using bitfield in struct f2fs_io_info
- introduce trace_f2fs_replace_atomic_write_block
- enhance iostat support and adds flush commands
Bug fix:
- revert "f2fs: truncate blocks in batch in __complete_revoke_list()"
- fix kernel crash on the atomic write abort flow
- call clear_page_private_reference in .{release,invalid}_folio
- support .migrate_folio for compressed inode
- fix cgroup writeback accounting with fs-layer encryption
- retry to update the inode page given data corruption
- fix kernel crash due to null io->bio
- fix some bugs in per-block age-based extent_cache:
a. wrong calculation of block age
b. update age extent in f2fs_do_zero_range()
c. update age extent correctly during truncation
-----BEGIN PGP SIGNATURE-----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=yXLl
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've got a huge number of patches that improve code
readability along with minor bug fixes, while we've mainly fixed some
critical issues in recently-added per-block age-based extent_cache,
atomic write support, and some folio cases.
Enhancements:
- add sysfs nodes to set last_age_weight and manage
discard_io_aware_gran
- show ipu policy in debugfs
- reduce stack memory cost by using bitfield in struct f2fs_io_info
- introduce trace_f2fs_replace_atomic_write_block
- enhance iostat support and adds flush commands
Bug fixes:
- revert "f2fs: truncate blocks in batch in __complete_revoke_list()"
- fix kernel crash on the atomic write abort flow
- call clear_page_private_reference in .{release,invalid}_folio
- support .migrate_folio for compressed inode
- fix cgroup writeback accounting with fs-layer encryption
- retry to update the inode page given data corruption
- fix kernel crash due to NULL io->bio
- fix some bugs in per-block age-based extent_cache:
- wrong calculation of block age
- update age extent in f2fs_do_zero_range()
- update age extent correctly during truncation"
* tag 'f2fs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (81 commits)
f2fs: drop unnecessary arg for f2fs_ioc_*()
f2fs: Revert "f2fs: truncate blocks in batch in __complete_revoke_list()"
f2fs: synchronize atomic write aborts
f2fs: fix wrong segment count
f2fs: replace si->sbi w/ sbi in stat_show()
f2fs: export ipu policy in debugfs
f2fs: make kobj_type structures constant
f2fs: fix to do sanity check on extent cache correctly
f2fs: add missing description for ipu_policy node
f2fs: fix to set ipu policy
f2fs: fix typos in comments
f2fs: fix kernel crash due to null io->bio
f2fs: use iostat_lat_type directly as a parameter in the iostat_update_and_unbind_ctx()
f2fs: add sysfs nodes to set last_age_weight
f2fs: fix f2fs_show_options to show nogc_merge mount option
f2fs: fix cgroup writeback accounting with fs-layer encryption
f2fs: fix wrong calculation of block age
f2fs: fix to update age extent in f2fs_do_zero_range()
f2fs: fix to update age extent correctly during truncation
f2fs: fix to avoid potential memory corruption in __update_iostat_latency()
...
|
||
|
Linus Torvalds
|
11c7052998 |
ARM: SoC drivers for 6.3
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
|
||
|
Linus Torvalds
|
d0a32f5520 |
powerpc updates for 6.3
- Support for configuring secure boot with user-defined keys on PowerVM LPARs. - Simplify the replay of soft-masked IRQs by making it non-recursive. - Add support for KCSAN on 64-bit Book3S. - Improvements to the API & code which interacts with RTAS (pseries firmware). - Change 32-bit powermac to assign PCI bus numbers per domain by default. - Some improvements to the 32-bit BPF JIT. - Various other small features and fixes. Thanks to: Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain, Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, Sudhakar Kuppusamy. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmP4GnkTHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgEnlEAC9UoE9JM853o9ZzpOJDrbYknHsRQad ztQJ9xu5qjkFHHryTmWKYdiAtNDFbcfn7+1aoc5FXrIb6BOfvBo/uRFw6P501Qwv Fg0MQyWUnT5WrI7+rBE2q+1+FaHBNKLycLNRSh5JpXtuKe2ubQfiFD80tarBnEnU 6I4bqXd+xjDtnqtpfiYnil/kdZTu/MzntdkmCne6fMkflgEQFU9EVQEnnE+imqFa 6BuCwITvZ+NyaaU+cYMeGZT7aoz9PAwkksgTxXW2gQbTIApX9WX4kYU/vbW4aHts 0bpzMmIbSbAklYIu2PQQhSU0bLfKJ+xly8E8tozHgRX6hrFlqvtmD/T5LHTBD11f FFzKb0NUCD8qTIy6Hn0M1tj5egLpxxzATPe/kVTkxxqTlZrzdSEaqzft6syyJHJd ueo0QN53AUyBaVMtxLbnB/U/8Vnz6rLqY+8dLKzXhjYjoPJqOZh/Qlc1Tk3syPwf E2j4H6wFqGMTOGi453Pijkpj3qpNkNT79FG5DmClcQLJxD/EXDyffLZITrkzQa0S FEkcMzz/Hn9Hkf7ZuNo4DN6ss6IF0vlxoi7GNr+MRR53/aVQJUDc8z24c4ICl/3w 20ETk57XMVJzP++Hb+yn16JyAawfQOOlckBRZ2O8W5YYVoes45hxDQxVoh8EII69 hb3KOGYEqF5wyA== =ECNb -----END PGP SIGNATURE----- Merge tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Support for configuring secure boot with user-defined keys on PowerVM LPARs - Simplify the replay of soft-masked IRQs by making it non-recursive - Add support for KCSAN on 64-bit Book3S - Improvements to the API & code which interacts with RTAS (pseries firmware) - Change 32-bit powermac to assign PCI bus numbers per domain by default - Some improvements to the 32-bit BPF JIT - Various other small features and fixes Thanks to Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain, Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, and Sudhakar Kuppusamy. * tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (114 commits) powerpc/pseries: Avoid hcall in plpks_is_available() on non-pseries powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot powerpc/e500: Add missing prototype for 'relocate_init' powerpc/64: Fix unannotated intra-function call warning powerpc/epapr: Don't use wrteei on non booke powerpc: Pass correct CPU reference to assembler powerpc/mm: Rearrange if-else block to avoid clang warning powerpc/nohash: Fix build with llvm-as powerpc/nohash: Fix build error with binutils >= 2.38 powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flags macintosh: windfarm: Use unsigned type for 1-bit bitfields powerpc/kexec_file: print error string on usable memory property update failure powerpc/machdep: warn when machine_is() used too early powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500 powerpc/eeh: Set channel state after notifying the drivers selftests/powerpc: Fix incorrect kernel headers search path powerpc/rtas: arch-wide function token lookup conversions powerpc/rtas: introduce rtas_function_token() API powerpc/pseries/lpar: convert to papr_sysparm API powerpc/pseries/hv-24x7: convert to papr_sysparm API ... |
||
|
Linus Torvalds
|
7c3dc440b1 |
cxl for v6.3
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for
setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL HDM
Decoder Capability to translate the CXL DVSEC Range Registers into
'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of hotplug,
or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug message
improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY/WYcgAKCRDfioYZHlFs
Z6m3APkBUtiEEm1o8ikdu5llUS1OTLBwqjJDwGMTyf8X/WDXhgD+J2mLsCgARS7X
5IS0RAtefutrW5sQpUucPM7QiLuraAY=
=kOXC
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dan Williams:
"To date Linux has been dependent on platform-firmware to map CXL RAM
regions and handle events / errors from devices. With this update we
can now parse / update the CXL memory layout, and report events /
errors from devices. This is a precursor for the CXL subsystem to
handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that
for DDR-attached-DRAM is handled by the EDAC driver where it maps
system physical address events to a field-replaceable-unit (FRU /
endpoint device). In general, CXL has the potential to standardize
what has historically been a pile of memory-controller-specific error
handling logic.
Another change of note is the default policy for handling RAM-backed
device-dax instances. Previously the default access mode was "device",
mmap(2) a device special file to access memory. The new default is
"kmem" where the address range is assigned to the core-mm via
add_memory_driver_managed(). This saves typical users from wondering
why their platform memory is not visible via free(1) and stuck behind
a device-file. At the same time it allows expert users to deploy
policy to, for example, get dedicated access to high performance
memory, or hide low performance memory from general purpose kernel
allocations. This affects not only CXL, but also systems with
high-bandwidth-memory that platform-firmware tags with the
EFI_MEMORY_SP (special purpose) designation.
Summary:
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow
for setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL
HDM Decoder Capability to translate the CXL DVSEC Range Registers
into 'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of
hotplug, or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug
message improvements"
* tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits)
dax/kmem: Fix leak of memory-hotplug resources
cxl/mem: Add kdoc param for event log driver state
cxl/trace: Add serial number to trace points
cxl/trace: Add host output to trace points
cxl/trace: Standardize device information output
cxl/pci: Remove locked check for dvsec_range_allowed()
cxl/hdm: Add emulation when HDM decoders are not committed
cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders
cxl/hdm: Emulate HDM decoder from DVSEC range registers
cxl/pci: Refactor cxl_hdm_decode_init()
cxl/port: Export cxl_dvsec_rr_decode() to cxl_port
cxl/pci: Break out range register decoding from cxl_hdm_decode_init()
cxl: add RAS status unmasking for CXL
cxl: remove unnecessary calling of pci_enable_pcie_error_reporting()
dax/hmem: build hmem device support as module if possible
dax: cxl: add CXL_REGION dependency
cxl: avoid returning uninitialized error code
cxl/pmem: Fix nvdimm registration races
cxl/mem: Fix UAPI command comment
cxl/uapi: Tag commands from cxl_query_cmd()
...
|
||
|
Linus Torvalds
|
39f013440d |
power supply and reset changes for the v6.3 series
- power-supply core: remove faulty cooling logic - convert all sysfs show() handlers from *printf() use sysfs_emit() - bq25890: add dual-charger support required by Lenovo Yoga Tab 3 Pro - bq27xxx: fix reporting critical level - syscon-reboot: add priority property support - Introduce new rt9467 charger driver - Introduce new rt9471 charger driver - Introduce new Odroid Go Ultra poweroff driver - misc. minor fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAmP2liwACgkQ2O7X88g7 +pqIYhAAn+V42O7Yf3w2FuUlxRvDUKfwi0V9LDWtHTxMQPR9WRZm2nHLJD2Ce4Ac 9I8ZacQMfjLnKV+cP6QH7Q30QVNmqSlAdMa54sgACOY/M/eFjLVaNr56mhwFWPKN Z2Cel8ey87OpsxHHJ/9QrMuppVMGhv6VCtoLnvOWQ2PslTRIdoVlMxIhr5Ur047S hoHc3t9J5K1GX/j24g6ed7Iu9MZpag0lKfxDenVLqfFfoSdoDfWEdRQejtECfLjo Z7TtfvG3NBdJXlGOn/E475h/V5RDAckQw/se3m/GpCIk2YzY1Bg4V1PhR+wxPj07 LT/DF5rfk8i9WflaUM9jQwhkZWzE8JqoH1Tsik5Yqbl15t389Vmef7Fh2pkMgxIF dyAzm2N3BhnA2ibUUW96n6swi/+VxbuFVde3xgc3nUx6Ug42FwN+PUnqTgwNp6GM h0oU/1xbflTlWD27Cu5ub77Y/CNg2TL06CKeLLi4CEs/Ldf2TDeviVZbNsAibasA bNBcDzHgs5jTH1FLAA79YKmbFbJWcM6rG0MA6KvzhNj/39eW/I99ehOScA3moIgN JdCZ3bCN0JQbTwt1QzUsT575F//QGLhYNeXrH9pG33EaXqpn4WRVN9ukxmLMSMBA UzmNGo7TUjofrDbh431XxDKcLmBaQZ9UFy0Z4lH6u+3B1nZ66RA= =bdNo -----END PGP SIGNATURE----- Merge tag 'for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Nothing special for the power-supply subystem this time. - power-supply core: remove faulty cooling logic - convert all sysfs show() handlers from *printf() use sysfs_emit() - bq25890: add dual-charger support required by Lenovo Yoga Tab 3 Pro - bq27xxx: fix reporting critical level - syscon-reboot: add priority property support - new rt9467 charger driver - new rt9471 charger driver - new Odroid Go Ultra poweroff driver - misc minor fixes and cleanups" * tag 'for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: reset: odroid-go-ultra: fix I2C dependency power: supply: leds: explicitly include linux/leds.h dt-bindings: power: supply: pm8941-coincell: Don't require charging properties dt-bindings: power: supply: pm8941-coincell: Add PM8998 compatible power: reset: add Odroid Go Ultra poweroff driver power: supply: rt9467: Fix spelling mistake "attache" -> "attach" power: supply: rt9471: fix using wrong ce_gpio in rt9471_probe() power: supply: max77650: Make max77650_charger_disable() return void Documentation: power: rt9467: Document exported sysfs entries power: supply: rt9467: Add Richtek RT9467 charger driver dt-bindings: power: supply: Add Richtek RT9467 battery charger Documentation: power: rt9471: Document exported sysfs entries power: supply: rt9471: Add Richtek RT9471 charger driver dt-bindings: power: supply: Add Richtek RT9471 battery charger power: supply: max1721x: Use strscpy() is more robust and safer power: supply: test-power: use strscpy() instead of strncpy() power: supply: bq27xxx: fix reporting critical level power: supply: bq256xx: Init ichg/vbat value with chip default value power: supply: collie_battery: Convert to GPIO descriptors (part 2) power: supply: remove faulty cooling logic ... |
||
|
Bastien Nocera
|
f0cf057594 |
ABI: testing: sysfs-class-power: Document absence of "present" property
Document how the absence of the "present" property in the sysfs power_supply class should be handled. Link: https://gitlab.freedesktop.org/upower/upower/-/merge_requests/173 Cc: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> |
||
|
Linus Torvalds
|
a13de74e47 |
IOMMU Updates for Linux v6.3:
Including:
- Consolidate iommu_map/unmap functions. There have been
blocking and atomic variants so far, but that was problematic
as this approach does not scale with required new variants
which just differ in the GFP flags used.
So Jason consolidated this back into single functions that
take a GFP parameter. This has the potential to cause
conflicts with other trees, as they introduce new call-sites
for the changed functions. I offered them to pull in the
branch containing these changes and resolve it, but I am not
sure everyone did that. The conflicts this caused with
upstream up to v6.2-rc8 are resolved in the final merge
commit.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
* Cater for three power domains on SM6375
* Document existing compatible strings for Qualcomm SoCs
* Tighten up clocks description for platform-specific compatible strings
- Enable Qualcomm workarounds for some additional platforms that need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=ZaZV
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Consolidate iommu_map/unmap functions.
There have been blocking and atomic variants so far, but that was
problematic as this approach does not scale with required new
variants which just differ in the GFP flags used. So Jason
consolidated this back into single functions that take a GFP
parameter.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
- Cater for three power domains on SM6375
- Document existing compatible strings for Qualcomm SoCs
- Tighten up clocks description for platform-specific
compatible strings
- Enable Qualcomm workarounds for some additional platforms that
need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
* tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits)
iommu/amd: Skip attach device domain is same as new domain
iommu: Attach device group to old domain in error path
iommu/vt-d: Allow to use flush-queue when first level is default
iommu/vt-d: Fix PASID directory pointer coherency
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
iommu/vt-d: Fix error handling in sva enable/disable paths
iommu/amd: Improve page fault error reporting
iommu/amd: Do not identity map v2 capable device when snp is enabled
iommu: Fix error unwind in iommu_group_alloc()
iommu/of: mark an unused function as __maybe_unused
iommu: dart: DART_T8110_ERROR range should be 0 to 5
iommu/vt-d: Enable IOMMU perfmon support
iommu/vt-d: Add IOMMU perfmon overflow handler support
iommu/vt-d: Support cpumask for IOMMU perfmon
iommu/vt-d: Add IOMMU perfmon support
iommu/vt-d: Support Enhanced Command Interface
iommu/vt-d: Retrieve IOMMU perfmon capability information
iommu/vt-d: Support size of the register set in DRHD
iommu/vt-d: Set No Execute Enable bit in PASID table entry
iommu/vt-d: Remove sva from intel_svm_dev
...
|
||
|
Linus Torvalds
|
a93e884edf |
Driver core changes for 6.3-rc1
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
|
||
|
Linus Torvalds
|
693fed981e |
Char/Misc and other driver subsystem changes for 6.3-rc1
Here is the large set of driver changes for char/misc drivers and other
smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem seems
under very active development recently. This required also merging
in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/inQw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yksvwCeOvU//SPwrbIpaeHAmHUv0PSVOrwAoKmt4ICh
hQUudlztfkvUJxKIH0gh
=Sjk4
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the
shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...
|
||
|
Linus Torvalds
|
72bffe7e1e |
USB / Thunderbolt driver changes for 6.3-rc1
Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ivpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymkdQCeOS6N613eggYrXwnbjJhxMQDtKAcAmweK6kXh
3o1IKOYqIMOx5E7zxn6W
=7ajf
-----END PGP SIGNATURE-----
Merge tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues"
* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
usb: dwc3: xilinx: Remove unused of_gpio,h
usb: typec: pd: Add higher capability sysfs for sink PDO
usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
usb: dwc3: pci: add support for the Intel Meteor Lake-M
usb: gadget: u_ether: Don't warn in gether_setup_name_default()
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_serial: Add null pointer check in gserial_resume
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
xhci: host: potential NULL dereference in xhci_generic_plat_probe()
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
of: device: Do not ignore error code in of_device_uevent_modalias
of: device: Ignore modalias of reused nodes
usb: gadget: configfs: Fix set but not used variable warning
usb: gadget: uvc: Use custom strings if available
usb: gadget: uvc: Allow linking function to string descs
usb: gadget: uvc: Pick up custom string descriptor IDs
usb: gadget: uvc: Allow linking XUs to string descriptors
usb: gadget: configfs: Attach arbitrary strings to cdev
usb: gadget: configfs: Support arbitrary string descriptors
...
|
||
|
Linus Torvalds
|
3822a7c409 |
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
||
|
Linus Torvalds
|
c2c23dc7d5 |
- Core Frameworks
- Change MFD support status from Supported to Maintained
- New Drivers
- Add support for the Intel Platform Management Component Interface (PMCI)
- Remove Drivers
- HTC PASIC3 LED/DS1WM
- Toshiba T7L66XB, TC6387XB and TC6393XB TMIO
- New Device Support
- Add support for N6000 Flash to Intel M10 BMC PMCI
- Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC
- New Functionality
- Provide Reset support to Syscon
- Fix-ups
- Explicitly provide missing include files
- Pass platform type data/info via the SPI/I2C/DT registration strategy
- Lots of DT documentation / adaptions
- Replace scnprintf() with preferred sysfs_emit()
- Remove unused / superfluous code
- Fix some trivial whitesspace / spelling / grammatical issues
- Replace pm_power_off with new and improved register_sys_off_handler() API
- Bug Fixes
- Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
- Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
- Refuse to build CS5535 on unsupported UML architectures
- Fix memory leaks in error return paths
- Prevent refcount leaks in error return paths
-----BEGIN PGP SIGNATURE-----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=f0fr
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Change MFD support status from Supported to Maintained
New Drivers:
- Add support for the Intel Platform Management Component Interface
(PMCI)
Removed Drivers:
- HTC PASIC3 LED/DS1WM
- Toshiba T7L66XB, TC6387XB and TC6393XB TMIO
New Device Support:
- Add support for N6000 Flash to Intel M10 BMC PMCI
- Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC
New Functionality:
- Provide Reset support to Syscon
Fix-ups:
- Explicitly provide missing include files
- Pass platform type data/info via the SPI/I2C/DT registration
strategy
- Lots of DT documentation / adaptions
- Replace scnprintf() with preferred sysfs_emit()
- Remove unused / superfluous code
- Fix some trivial whitesspace / spelling / grammatical issues
- Replace pm_power_off with new and improved
register_sys_off_handler() API
Bug Fixes:
- Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
- Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
- Refuse to build CS5535 on unsupported UML architectures
- Fix memory leaks in error return paths
- Prevent refcount leaks in error return paths"
* tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (40 commits)
dt-bindings: mfd: qcom,tcsr: Add compatible for IPQ5332
dt-bindings: mfd: Add NXP BBNSM
mfd: ntxec: Add version number for EC in Tolino Vision
dt-bindings: mfd: syscon: Add mt8365-syscfg
mfd: Remove toshiba tmio drivers
mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak
mfd: syscon: Allow reset control for syscon devices
dt-bindings: mfd/syscon: Add resets property
dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226
mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registration
mfd: axp20x: Switch to the sys-off handler API
mfd: core: Spelling s/compement/complement/
mfd: max8925: Remove the unused function irq_to_max8925()
mfd: qcom-pm8xxx: Remove set but unused variable 'rev'
dt-bindings: mfd: syscon: Document GXP register compatible
mfd: twl4030-power: Drop empty platform remove function
mfd: twl: Fix TWL6032 phy vbus detection
mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
MAINTAINERS: Move MFD from a Supported to Maintaied state
...
|