commit d47b9b8429 upstream.
The driver is expecting accuracy of NANOs for intensity scale in
raw_write. The IIO core is however defaulting to MICROs. This leads the
raw-write of smallest scales to never succeed as correct selector(s) are
not found.
Fix this by implementing the .write_raw_get_fmt callback to use NANO
accuracy for writes of IIO_CHAN_INFO_SCALE.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: e52afbd610 ("iio: light: ROHM BU27034 Ambient Light Sensor")
Link: https://lore.kernel.org/r/5369117315cf05b88cf0ccb87373fd77190f6ca2.1686648422.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2a6996990 upstream.
Commit 813665564b ("iio: core: Convert to use firmware node handle
instead of OF node") switched the kind of nodes to use for label
retrieval in device registration. Probably an unwanted change in that
commit was that if the device has no parent then NULL pointer is
accessed. This is what happens in the stock IIO dummy driver when a
new entry is created in configfs:
# mkdir /sys/kernel/config/iio/devices/dummy/foo
BUG: kernel NULL pointer dereference, address: ...
...
Call Trace:
__iio_device_register
iio_dummy_probe
Since there seems to be no reason to make a parent device of an IIO
dummy device mandatory, let’s prevent the invalid memory access in
__iio_device_register when the parent device is NULL. With this
change, the IIO dummy driver works fine with configfs.
Fixes: 813665564b ("iio: core: Convert to use firmware node handle instead of OF node")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Link: https://lore.kernel.org/r/20230719083208.88149-1-mzamazal@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6811694eb2 upstream.
The function lsm6dsx_get_acpi_mount_matrix should return an error when ACPI
support is not enabled to allow executing iio_read_mount_matrix in the
probe function.
Fixes: dc3d25f22b ("iio: imu: lsm6dsx: Add ACPI mount matrix retrieval")
Signed-off-by: Alejandro Tafalla <atafalla@dnyon.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20230714153132.27265-1-atafalla@dnyon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a41e19cc0d upstream.
The affected lines were resulting in a NULL pointer dereference on our
platform because the device tree contained the following list of
compatible strings:
power-sensor@40 {
compatible = "ti,ina232", "ti,ina231";
...
};
Since the driver doesn't declare a compatible string "ti,ina232", the OF
matching succeeds on "ti,ina231". But the I2C device ID info is
populated via the first compatible string, cf. modalias population in
of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy
I2C device ID table either, the struct i2c_device_id *id pointer in the
probe function is NULL.
Fix this by using the already populated type variable instead, which
points to the proper driver data. Since the name is also wanted, add a
generic one to the ina2xx_config table.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Fixes: c43a102e67 ("iio: ina2xx: add support for TI INA2xx Power Monitors")
Link: https://lore.kernel.org/r/20230619141239.2257392-1-alvin@pqrs.dk
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09738ccbc4 upstream.
Enable core clock at probe stage and disable it at remove stage.
Core clock is responsible for turning on/off the entire SoC module so
it should be on before the first module register is touched and be off
at very last moment.
Fixes: 3adbf34273 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs")
Signed-off-by: George Stark <gnstark@sberdevices.ru>
Link: https://lore.kernel.org/r/20230721102413.255726-2-gnstark@sberdevices.ru
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bc471b6c3 upstream.
AC excitation enable feature exposed to user on AD7192, allowing a bit
which should be 0 to be set. This feature is specific only to AD7195. AC
excitation attribute moved accordingly.
In the AD7195 documentation, the AC excitation enable bit is on position
22 in the Configuration register. ACX macro changed to match correct
register and bit.
Note that the fix tag is for the commit that moved the driver out of
staging.
Fixes: b581f748cc ("staging: iio: adc: ad7192: move out of staging")
Signed-off-by: Alisa Roman <alisa.roman@analog.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230614155242.160296-1-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 507397d19b upstream.
The regulator_get_voltage() function returns negative error codes.
This function saves it to an unsigned int and then does some range
checking and, since the error code falls outside the correct range,
it returns -EINVAL.
Beyond the messiness, this is bad because the regulator_get_voltage()
function can return -EPROBE_DEFER and it's important to propagate that
back properly so it can be handled.
Fixes: da35a7b526 ("iio: frequency: admv1013: add support for ADMV1013")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ce75aac3-2aba-4435-8419-02e59fdd862b@moroto.mountain
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a4629055e upstream.
The struct cros_ec_command contains several integer fields and a
trailing array. An allocation size neglecting the integer fields can
lead to buffer overrun.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Yiyuan Guo <yguoaz@gmail.com>
Fixes: 974e6f02e2 ("iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub.")
Link: https://lore.kernel.org/r/20230630143719.1513906-1-yguoaz@gmail.com
Cc: <Stable@vger.kerenl.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c57fa00370 upstream.
According to the datasheets of supported meson SoCs length of ADC_CLK_DIV
field is 6-bit. Although all supported SoCs have the register
with that field documented later SoCs use external clock rather than
ADC internal clock so this patch affects only meson8 family (S8* SoCs).
Fixes: 3adbf34273 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs")
Signed-off-by: George Stark <GNStark@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230606165357.42417-1-gnstark@sberdevices.ru
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1cfbd52ed upstream.
Scan elements for x,y,z channels is little endian and requires no bit shifts.
LE vs. BE is controlled in register SENS_CONFIG2 and bit LE_BE, default
value is LE.
Fixes: a3e0b51884 ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230605103223.1400980-1-sean@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e58e3a6f8 upstream.
Pointer to indio_dev structure is obtained via spi_get_drvdata() at
the beginning of function ad7192_setup(), but the spi->dev->driver_data
member is not initialized, hence a NULL pointer is returned.
Fix by changing ad7192_setup() signature to take pointer to struct
iio_dev, and get ad7192_state pointer via st = iio_priv(indio_dev);
Fixes: bd5dcdeb3f ("iio: adc: ad7192: convert to device-managed functions")
Signed-off-by: Fabrizio Lamarque <fl.scratchpad@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230530075311.400686-2-fl.scratchpad@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4cba07e64 upstream.
Apparently, despite the name Digital Input Configuration Register, the
settings in the DIN_CONFIGx registers also affect other channel
functions. In particular, setting a non-zero value in the DIN_SINK
field breaks the resistance measurement function.
Now, one can of course argue that specifying a drive-strength-microamp
property along with a adi,ch-func which is not one of the digital
input functions is a bug in the device tree. However, we have a rather
complicated setup with instances of ad74412r on external hardware
modules, and have set a default drive-strength-microamp in our DT
fragments describing those, merely modifying the adi,ch-func settings
to reflect however the modules have been wired up. And restricting
this setting to just being done for digital input doesn't make the
driver any more complex.
Fixes: 504eb48558 (iio: ad74413r: wire up support for drive-strength-microamp property)
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20230503105042.453755-1-linux@rasmusvillemoes.dk
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Timestamp reset is not done in the correct place. It must be done
before enabling buffer. The reason is that interrupt timestamping
is always happening when the chip is on, even if the
corresponding sensor is off. When the sensor restarts, timestamp
is wrong if you don't do a reset first.
Fixes: ec74ae9fd3 ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230509152202.245444-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Sigma-Delta ADCs supported by this driver can use SDO as an interrupt
line to indicate the completion of a conversion. However, some devices
cannot properly detect the completion of a conversion by an interrupt.
This is for the reason mentioned in the following commit.
commit e9849777d0 ("genirq: Add flag to force mask in
disable_irq[_nosync]()")
A read operation is performed by an extra interrupt before the completion
of a conversion. At this time, the value read from the ADC data register
is the same as the previous conversion result. This patch fixes the issue
by setting IRQ_DISABLE_UNLAZY flag.
Fixes: 0c6ef985a1 ("iio: adc: ad7791: fix IRQ flags")
Fixes: 1a913270e5 ("iio: adc: ad7793: Fix IRQ flag")
Fixes: e081102f30 ("iio: adc: ad7780: Fix IRQ flag")
Fixes: 89a86da5cb ("iio: adc: ad7192: Add IRQ flag")
Fixes: 79ef91493f ("iio: adc: ad7124: Set IRQ type to falling")
Signed-off-by: Masahiro Honda <honda@mechatrax.com>
Link: https://lore.kernel.org/r/20230518110816.248-1-honda@mechatrax.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The i2c_master_send() returns number of sent bytes on success,
or negative on error. The suspend/resume callbacks expect zero
on success and non-zero on error. Adapt the return value of the
i2c_master_send() to the expectation of the suspend and resume
callbacks, including proper validation of the return value.
Fixes: cf35ad61ac ("iio: add mcp4725 I2C DAC driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230511004330.206942-1-marex@denx.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The fwnode_irq_get_byname() was returning 0 at device-tree mapping
error. If this occurred, the KX022A driver did abort the probe but
errorneously directly returned the return value from
fwnode_irq_get_byname() from probe. In case of a device-tree mapping
error this indicated success.
The fwnode_irq_get_byname() has since been fixed to not return zero on
error so the check for fwnode_irq_get_byname() can be relaxed to only
treat negative values as errors. This will also do decent fix even when
backported to branches where fwnode_irq_get_byname() can still return
zero on error because KX022A probe should later fail at IRQ requesting
and a prober error handling should follow.
Relax the return value check for fwnode_irq_get_byname() to only treat
negative values as errors.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202305110245.MFxC9bUj-lkp@intel.com/
Link: https://lore.kernel.org/r/202305110245.MFxC9bUj-lkp@intel.com/
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 7c1d1677b3 ("iio: accel: Support Kionix/ROHM KX022A accelerometer")
Link: https://lore.kernel.org/r/b45b4b638db109c6078d243252df3a7b0485f7d5.1683875389.git.mazziesaccount@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The reset bit must be always written to the hardware no matter what value
is in a cache or register. Ensure this by using regmap_write_bits()
instead of the regmap_update_bits(). Furthermore, the SWRESET bit may be
self-clearing, so mark the SYSTEM_CONTROL register volatile to guarantee
we do also read the right state - should we ever need to read it.
Finally, writing the SWRESET bit will restore the default register
values. This can cause register cache to be outdated if there are any
register values cached.
Rebuild register cache after SWRESET and use regmap_update_bits() when
performing the reset.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: e52afbd610 ("iio: light: ROHM BU27034 Ambient Light Sensor")
Link: https://lore.kernel.org/r/ZFjWhbfuN5XcKty+@fedora
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit 28d1a7ac2a ("iio: dac: Add AD5758 support") adds the config AD5758
and the corresponding driver ad5758.c. In the Makefile, the ad5758 driver
is however included when AD5755 is selected, not when AD5758 is selected.
Probably, this was simply a mistake that happened by copy-and-paste and
forgetting to adjust the actual line. Surprisingly, no one has ever noticed
that this driver is actually only included when AD5755 is selected and that
the config AD5758 has actually no effect on the build.
Fixes: 28d1a7ac2a ("iio: dac: Add AD5758 support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20230508040208.12033-1-lukas.bulwahn@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On success, ad74413r_get_single_adc_result() returns IIO_VAL_INT aka
1. So currently, the IIO_CHAN_INFO_PROCESSED case is effectively
equivalent to the IIO_CHAN_INFO_RAW case, and we never call
ad74413r_adc_to_resistance_result() to convert the adc measurement to
ohms.
Check ret for being negative rather than non-zero.
Fixes: fea251b6a5 (iio: addac: add AD74413R driver)
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230503095817.452551-1-linux@rasmusvillemoes.dk
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If only adc differential channels are defined driver will fail with
stm32-adc: probe of 48003000.adc:adc@0 failed with error -22
Fix this by skipping the initialization if no channels are defined.
This applies only to the legacy way of initializing adc channels.
Fixes: d7705f3544 ("iio: adc: stm32-adc: convert to device properties")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20230503162029.3654093-2-sean@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If no adc differential channels are defined driver will fail with EINVAL:
stm32-adc: probe of 48003000.adc:adc@0 failed with error -22
Fix this by skipping the initialization if no channels are defined.
This applies only to the legacy way of initializing adc channels.
Fixes: d7705f3544 ("iio: adc: stm32-adc: convert to device properties")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20230503162029.3654093-1-sean@geanix.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD7192 provides a specific channel configuration where both negative
and positive inputs are connected to AIN2. This was represented in the
ad7192 driver as a IIO channel with .channel = 2 and .extended_name set
to "shorted".
The problem with this approach, is that the driver provided two IIO
channels with the identifier .channel = 2; one "shorted" and the other
not. This goes against the IIO ABI, as a channel identifier should be
unique.
Address this issue by changing "shorted" channels to being differential
instead, with channel 2 vs. itself, as we're actually measuring AIN2 vs.
itself.
Note that the fix tag is for the commit that moved the driver out of
staging. The bug existed before that, but backporting would become very
complex further down and unlikely to happen.
Fixes: b581f748cc ("staging: iio: adc: ad7192: move out of staging")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Co-developed-by: Alisa Roman <alisa.roman@analog.com>
Signed-off-by: Alisa Roman <alisa.roman@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230330102100.17590-1-paul@crapouillou.net
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When apply_acpi_orientation() fails, st_accel_common_probe() will fall back
to iio_read_mount_matrix(), which checks for a mount-matrix device property
and if that is not set falls back to the identity matrix.
But when a sensor has no ACPI companion fwnode, or when the ACPI fwnode
does not have a "_ONT" method apply_acpi_orientation() was returning 0,
causing iio_read_mount_matrix() to never get called resulting in an
invalid mount_matrix:
[root@fedora ~]# cat /sys/bus/iio/devices/iio\:device0/mount_matrix
(null), (null), (null); (null), (null), (null); (null), (null), (null)
Fix this by making apply_acpi_orientation() always return an error when
it did not set the mount_matrix.
Fixes: 3d8ad94bb1 ("iio: accel: st_sensors: Support generic mounting matrix")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Marius Hoch <mail@mariushoch.de>
Link: https://lore.kernel.org/r/20230416212409.310936-1-hdegoede@redhat.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The IIO ABI mandates expressing integration times in seconds. The GTS
helper errorneously uses micro seconds in integration_times_available.
Fix this by converting the lists to IIO_VAL_INT_PLUS_MICRO.
Fixes: 38416c28e1 ("iio: light: Add gain-time-scale helpers")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/eeacd192c259e885850b5a2dd8b776bccfc44fa8.1681722914.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The bu27034 uses micro seconds for integration time configuration. This
is incorrect as the ABI mandates use of seconds.
Change BU27034 driver to use seconds for integration time.
Fixes: e52afbd610 ("iio: light: ROHM BU27034 Ambient Light Sensor")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/a05647669af22ba919c7c87dccb43975e3235a87.1681722914.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Valid values for "adc_chan" are zero to (PALMAS_ADC_CH_MAX - 1).
Smatch detects some buffer overflows caused by this:
drivers/iio/adc/palmas_gpadc.c:721 palmas_gpadc_read_event_value() error: buffer overflow 'adc->thresholds' 16 <= 16
drivers/iio/adc/palmas_gpadc.c:758 palmas_gpadc_write_event_value() error: buffer overflow 'adc->thresholds' 16 <= 16
The effect of this bug in other functions is more complicated but
obviously we should fix all of them.
Fixes: a99544c6c8 ("iio: adc: palmas: add support for iio threshold events")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/14fee94a-7db7-4371-b7d6-e94d86b9561e@kili.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Smatch reports:
drivers/iio/adc/mxs-lradc-adc.c:766 mxs_lradc_adc_probe() warn:
missing unwind goto?
the order of three init operation:
1.mxs_lradc_adc_trigger_init
2.iio_triggered_buffer_setup
3.mxs_lradc_adc_hw_init
thus, the order of three cleanup operation should be:
1.mxs_lradc_adc_hw_stop
2.iio_triggered_buffer_cleanup
3.mxs_lradc_adc_trigger_remove
we exchange the order of two cleanup operations,
introducing the following differences:
1.if mxs_lradc_adc_trigger_init fails, returns directly;
2.if trigger_init succeeds but iio_triggered_buffer_setup fails,
goto err_trig and remove the trigger.
In addition, we also reorder the unwind that goes on in the
remove() callback to match the new ordering.
Fixes: 6dd112b9f8 ("iio: adc: mxs-lradc: Add support for ADC driver")
Signed-off-by: Jiakai Luo <jkluo@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230422133407.72908-1-jkluo@hust.edu.cn
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad4130 driver registers a clock provider, but never removes it. This
leaves a stale clock provider behind that references freed clocks when the
device is unbound.
Register a managed action to remove the clock provider when the device is
removed.
Fixes: 62094060cf ("iio: adc: ad4130: add AD4130 driver")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230414150702.518441-1-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The tmag5273 gets a runtime PM reference before reading a measurement and
releases it when done. But if the measurement fails the tmag5273_read_raw()
function exits before releasing the reference.
Make sure that this error path also releases the runtime PM reference.
Fixes: 866a138917 ("iio: magnetometer: add ti tmag5273 driver")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230414013752.498767-1-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The scale value of ibus and ibat on the datasheet is incorrect due to the
customer report after the experimentation with some specific vendor ID
chips.
Fixes: c1404d1b65 ("iio: adc: mt6370: Add MediaTek MT6370 support")
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/1681122862-1994-1-git-send-email-chiaen_wu@richtek.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The problem is these lines:
ret = vref_uv = regulator_get_voltage(adc->vref);
if (ret < 0)
The "ret" variable is type long and "vref_uv" is u32 so that means
the condition can never be true on a 64bit system. A negative error
code from regulator_get_voltage() would be cast to a high positive
u32 value and then remain a high positive value when cast to a long.
The "ret" variable only ever stores ints so it should be declared as
an int. We can delete the "vref_uv" variable and use "ret" directly.
Fixes: 7d02296ac8 ("iio: adc: add imx93 adc support")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/Y+utEvjfjQRQo2QB@kili
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Here is the "big" set of char/misc and other driver subsystems for
6.4-rc1.
It's pretty big, but due to the removal of pcmcia drivers, almost breaks
even for number of lines added vs. removed, a nice change.
Included in here are:
- removal of unused PCMCIA drivers (finally!)
- Interconnect driver updates and additions
- Lots of IIO driver updates and additions
- MHI driver updates
- Coresight driver updates
- NVMEM driver updates, which required some OF updates
- W1 driver updates and a new maintainer to manage the subsystem
- FPGA driver updates
- New driver subsystem, CDX, for AMD systems
- lots of other small driver updates and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp5Eg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynSXgCg0kSw3vUYwpsnhAsQkoPw1QVA23sAn2edRCMa
GEkPWjrROueCom7xbLMu
=eR+P
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc drivers updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystems for
6.4-rc1.
It's pretty big, but due to the removal of pcmcia drivers, almost
breaks even for number of lines added vs. removed, a nice change.
Included in here are:
- removal of unused PCMCIA drivers (finally!)
- Interconnect driver updates and additions
- Lots of IIO driver updates and additions
- MHI driver updates
- Coresight driver updates
- NVMEM driver updates, which required some OF updates
- W1 driver updates and a new maintainer to manage the subsystem
- FPGA driver updates
- New driver subsystem, CDX, for AMD systems
- lots of other small driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits)
mcb-lpc: Reallocate memory region to avoid memory overlapping
mcb-pci: Reallocate memory region to avoid memory overlapping
mcb: Return actual parsed size when reading chameleon table
kernel/configs: Drop Android config fragments
virt: acrn: Replace obsolete memalign() with posix_memalign()
spmi: Add a check for remove callback when removing a SPMI driver
spmi: fix W=1 kernel-doc warnings
spmi: mtk-pmif: Drop of_match_ptr for ID table
spmi: pmic-arb: Convert to platform remove callback returning void
spmi: mtk-pmif: Convert to platform remove callback returning void
spmi: hisi-spmi-controller: Convert to platform remove callback returning void
w1: gpio: remove unnecessary ENOMEM messages
w1: omap-hdq: remove unnecessary ENOMEM messages
w1: omap-hdq: add SPDX tag
w1: omap-hdq: allow compile testing
w1: matrox: remove unnecessary ENOMEM messages
w1: matrox: use inline over __inline__
w1: matrox: switch from asm to linux header
w1: ds2482: do not use assignment in if condition
w1: ds2482: drop unnecessary header
...
A fairly standard release for SPI with the exception of a change to the
API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily for
a while. There's also a new API to allow us to TPM chips on half duplex
controllers.
There's three commits in here that were mangled by a bad interaction
between the alsa-devel mailing list software and b4, I didn't notice
until there were merges on top with it being SPI not ALSA. It seemed
clear enough to not be worth going back and fixing.
- Refactoring in preparation for supporting multiple chip selects for a
single device, needed by some flash devices, which required a change
in the SPI device API visible throughout the tree.
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI.
- Optimisation for large transfers on fsl-cpm devices.
- Cleanups around device property use which fix some sisues with
fwnode.
- Use of both void remove() and devm_platform_.*ioremap_resource().
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI.
The final commit converting to DEV_PM_OPS() was applied late to fix a
warning that was introduced by some of the earlier work.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRIFQgACgkQJNaLcl1U
h9BJOwf+JF2RySdn5g1LsyTndPZhLfw4iJgTHaMlnv5tiPHvYVYMM/mNMbMr5Znh
Y2T0OUkzuRfOK273C+hItC1bTYFTa2cEbDb5dpmKBOZdQ3hjGsZQBvuH2bScUQ+a
H7UgD3FYOJST6k6rRgZQxVMPePFrXAOaO1gmFWTR3v1EcEr2JeQnjZsmymFXcTnc
CtPg9N3RvhVnq5aXuxSgQeyyKIjo4LJh/eZ2mexPIu0DeUq3MftaWwSwCXFIoeNC
DMLA4mZWTgf/yt6JUALwLr+bIiJjb4qGjp3xGZ2wmX7zn73f9QQvuunKb1V4zbNF
EdXLo2VjA9cZjsihenBaKeHnkfgNfA==
=IRqY
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A fairly standard release for SPI with the exception of a change to
the API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily
for a while.
There's also a new API to allow us to support TPM chips on half duplex
controllers.
Summary:
- Refactoring in preparation for supporting multiple chip selects for
a single device, needed by some flash devices, which required a
change in the SPI device API visible throughout the tree
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI
- Optimisation for large transfers on fsl-cpm devices
- Cleanups around device property use which fix some sisues with
fwnode
- Use of both void remove() and devm_platform_.*ioremap_resource()
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI"
* tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits)
spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: tegra210-quad: Enable TPM wait polling
spi: Add TPM HW flow flag
spi: bcm63xx: remove PM_SLEEP based conditional compilation
spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: spi-cadence: Add support for Slave mode
spi: spi-cadence: Switch to spi_controller structure
spi: cadence-quadspi: fix suspend-resume implementations
spi: dw: Add support for AMD Pensando Elba SoC
spi: dw: Add AMD Pensando Elba SoC SPI Controller
spi: cadence-quadspi: Disable the SPI before reconfiguring
spi: cadence-quadspi: Update the read timeout based on the length
spi: spi-loopback-test: Add module param for iteration length
spi: add support for Amlogic A1 SPI Flash Controller
dt-bindings: spi: add Amlogic A1 SPI controller
spi: fsl-spi: No need to check transfer length versus word size
spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void
spi: fsl-cpm: Use 16 bit mode for large transfers with even size
spi: fsl-spi: Re-organise transfer bits_per_word adaptation
spi: fsl-spi: Fix CPM/QE mode Litte Endian
...
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table (Jessica
Clarke).
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang).
* Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID()
(Xiongfeng Wang).
* Add missing tables to astable (Pedro Falcato).
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen).
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski).
* Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary).
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore).
* Add support for ClockInput resource (v6.5) (Niyas Sait).
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L).
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L).
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein).
* Make ACPICA code support flexible arrays properly (Kees Cook).
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red).
* Add os specific support for Zephyr RTOS to ACPICA (Najumon).
* Update version to 20230331 (Bob Moore).
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne).
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu).
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen).
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser).
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker).
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko).
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan).
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue).
- Add CXL error types to the error injection code in APEI (Tony Luck).
- Refactor acpi_data_prop_read_single() (Andy Shevchenko).
- Fix two issues in the ACPI SBS driver (Armin Wolf).
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi).
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki).
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede).
- Replace irqdomain.h include with struct declarations in ACPI headers
and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring).
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K).
- Update the pm_profile sysfs attribute documentation (Rafael Wysocki).
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=O61K
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20230331, fix the ACPI SBS driver and the evaluation of the _PDC
method on Xen dom0 in the ACPI processor driver, update the ACPI
driver for Intel SoCs and clean up code in multiple places.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table
(Jessica Clarke)
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang)
* Add missing macro ACPI_FUNCTION_TRACE() for
acpi_ns_repair_HID() (Xiongfeng Wang)
* Add missing tables to astable (Pedro Falcato)
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen)
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski)
* Add support for Arm's MPAM ACPI table version 2 (Hesham
Almatary)
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore)
* Add support for ClockInput resource (v6.5) (Niyas Sait)
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L)
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil
V L)
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein)
* Make ACPICA code support flexible arrays properly (Kees Cook)
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red)
* Add os specific support for Zephyr RTOS to ACPICA (Najumon)
* Update version to 20230331 (Bob Moore)
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne)
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu)
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen)
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser)
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker)
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko)
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan)
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue)
- Add CXL error types to the error injection code in APEI (Tony Luck)
- Refactor acpi_data_prop_read_single() (Andy Shevchenko)
- Fix two issues in the ACPI SBS driver (Armin Wolf)
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi)
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki)
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede)
- Replace irqdomain.h include with struct declarations in ACPI
headers and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring)
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K)
- Update the pm_profile sysfs attribute documentation (Rafael
Wysocki)
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede)"
* tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail
ACPI: bus: Ensure that notify handlers are not running after removal
ACPI: bus: Add missing braces to acpi_sb_notify()
ACPI: video: Remove desktops without backlight DMI quirks
ACPI: video: Remove register_backlight_delay module option and code
ACPI: Replace irqdomain.h include with struct declarations
fpga: lattice-sysconfig-spi: Add explicit include for of.h
tpm: atmel: Add explicit include for of.h
virtio-mmio: Add explicit include for of.h
pata: ixp4xx: Add explicit include for of.h
ata: pata_macio: Add explicit include of irqdomain.h
serial: 8250_tegra: Add explicit include for of.h
net: rfkill-gpio: Add explicit include for of.h
staging: iio: resolver: ad2s1210: Add explicit include for of.h
iio: adc: ad7292: Add explicit include for of.h
ACPICA: Update version to 20230331
ACPICA: add os specific support for Zephyr RTOS
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array
ACPICA: acpi_madt_oem_data: Fix flexible array member definition
...
- Add a thermal zone 'devdata' accessor and modify several drivers to
use it (Daniel Lezcano).
- Prevent drivers from using the 'device' internal thermal zone
structure field directly (Daniel Lezcano).
- Clean up the hwmon thermal driver (Daniel Lezcano).
- Add thermal zone id accessor and thermal zone type accessor
and prevent drivers from using thermal zone fields directly (Daniel
Lezcano).
- Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano).
- Add lower bound check for sysfs input to the x86_pkg_temp_thermal
Intel thermal driver (Zhang Rui).
- Add more thermal zone device encapsulation: prevent setting structure
field directly, access the sensor device instead the thermal zone's
device for trace, relocate the traces in drivers/thermal (Daniel
Lezcano).
- Use the generic trip point for the i.MX and remove the get_trip_temp
ops (Daniel Lezcano).
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li).
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown (Wolfram
Sang).
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur).
- Add MT8365 support (Amjad Ouled-Ameur).
- Preparational cleanup and DT bindings for RK3588 support (Sebastian
Reichel).
- Add driver support for RK3588 (Finley Xiao).
- Use devm_reset_control_array_get_exclusive() for the Rockchip driver
(Ye Xingchen).
- Detect power gated thermal zones and return -EAGAIN when reading the
temperature (Mikko Perttunen).
- Remove thermal_bind_params structure as it is unused (Zhang Rui)
- Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
Herring).
- Update the power allocator documentation according to the thermal
trace relocation (Lukas Bulwahn).
- Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
(Chen-Yu Tsai).
- Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen).
- Add AP domain support to LVTS thermal controllers for mt8195
(Balsam CHIHI).
- Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano).
- Make thermal_of_zone_[un]register() private to the thermal OF code
(Daniel Lezcano).
- Create a private copy of the thermal zone device parameters
structure when registering a thermal zone (Daniel Lezcano).
- Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui).
- Revert recent message adjustment in thermal_hwmon (Rafael Wysocki).
- Use of_property_present() for testing DT property presence in
thermal control code (Rob Herring).
- Clean up thermal_list_lock locking in the thermal core (Rafael
Wysocki).
- Add DLVR support for RFIM control in the int340x Intel thermal
driver (Srinivas Pandruvada).
-----BEGIN PGP SIGNATURE-----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=XNJE
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly continue to prepare the thermal control subsystem for
using unified representation of trip points, which includes cleanups,
code refactoring and similar and update several drivers (for other
reasons), which includes new hardware support.
Specifics:
- Add a thermal zone 'devdata' accessor and modify several drivers to
use it (Daniel Lezcano)
- Prevent drivers from using the 'device' internal thermal zone
structure field directly (Daniel Lezcano)
- Clean up the hwmon thermal driver (Daniel Lezcano)
- Add thermal zone id accessor and thermal zone type accessor and
prevent drivers from using thermal zone fields directly (Daniel
Lezcano)
- Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano)
- Add lower bound check for sysfs input to the x86_pkg_temp_thermal
Intel thermal driver (Zhang Rui)
- Add more thermal zone device encapsulation: prevent setting
structure field directly, access the sensor device instead the
thermal zone's device for trace, relocate the traces in
drivers/thermal (Daniel Lezcano)
- Use the generic trip point for the i.MX and remove the
get_trip_temp ops (Daniel Lezcano)
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li)
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown
(Wolfram Sang)
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur)
- Add MT8365 support (Amjad Ouled-Ameur)
- Preparational cleanup and DT bindings for RK3588 support (Sebastian
Reichel)
- Add driver support for RK3588 (Finley Xiao)
- Use devm_reset_control_array_get_exclusive() for the Rockchip
driver (Ye Xingchen)
- Detect power gated thermal zones and return -EAGAIN when reading
the temperature (Mikko Perttunen)
- Remove thermal_bind_params structure as it is unused (Zhang Rui)
- Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
Herring)
- Update the power allocator documentation according to the thermal
trace relocation (Lukas Bulwahn)
- Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
(Chen-Yu Tsai)
- Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen)
- Add AP domain support to LVTS thermal controllers for mt8195
(Balsam CHIHI)
- Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano)
- Make thermal_of_zone_[un]register() private to the thermal OF code
(Daniel Lezcano)
- Create a private copy of the thermal zone device parameters
structure when registering a thermal zone (Daniel Lezcano)
- Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui)
- Revert recent message adjustment in thermal_hwmon (Rafael Wysocki)
- Use of_property_present() for testing DT property presence in
thermal control code (Rob Herring)
- Clean up thermal_list_lock locking in the thermal core (Rafael
Wysocki)
- Add DLVR support for RFIM control in the int340x Intel thermal
driver (Srinivas Pandruvada)"
* tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
thermal: intel: int340x: Add DLVR support for RFIM control
thermal/core: Alloc-copy-free the thermal zone parameters structure
thermal/of: Unexport unused OF functions
thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister
thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195
dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195
thermal: amlogic: Use dev_err_probe()
thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask
MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement
dt-bindings: thermal: Drop unneeded quotes
thermal/core: Remove thermal_bind_params structure
thermal/drivers/tegra-bpmp: Handle offline zones
thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive()
dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible
thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver
thermal/drivers/rockchip: Support dynamic sized sensor array
thermal/drivers/rockchip: Simplify channel id logic
thermal/drivers/rockchip: Use dev_err_probe
thermal/drivers/rockchip: Simplify clock logic
thermal/drivers/rockchip: Simplify getting match data
...
Merge ACPI bus type driver changes, ACPI backlight driver updates and a
series of cleanups related to of.h for 6.4-rc1:
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki).
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede).
- Replace irqdomain.h include with struct declarations in ACPI headers
and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring).
* acpi-bus:
ACPI: bus: Ensure that notify handlers are not running after removal
ACPI: bus: Add missing braces to acpi_sb_notify()
* acpi-video:
ACPI: video: Remove desktops without backlight DMI quirks
ACPI: video: Remove register_backlight_delay module option and code
* acpi-misc:
ACPI: Replace irqdomain.h include with struct declarations
fpga: lattice-sysconfig-spi: Add explicit include for of.h
tpm: atmel: Add explicit include for of.h
virtio-mmio: Add explicit include for of.h
pata: ixp4xx: Add explicit include for of.h
ata: pata_macio: Add explicit include of irqdomain.h
serial: 8250_tegra: Add explicit include for of.h
net: rfkill-gpio: Add explicit include for of.h
staging: iio: resolver: ad2s1210: Add explicit include for of.h
iio: adc: ad7292: Add explicit include for of.h
The event config is controlled through the IIO events subsystem and
device wakeup is controlled by /sys/devices/.../power/wakeup. Let's keep
those two knobs independent.
Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
Link: https://lore.kernel.org/r/20230408114825.824505-10-risca@dalakolonin.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The palmas gpadc block has support for monitoring up to 2 ADC channels
and issue an interrupt if they reach past a set threshold. This change
hooks into the IIO events system and exposes to userspace the ability to
configure these threshold values for each channel, but only allow up to
2 such thresholds to be enabled at any given time. Trying to enable a
third channel will result in an error.
Userspace is expected to input calibrated, as opposed to raw, values as
threshold. However, it is not enough to do the opposite of what is done
when converting the other way around. To account for tolerances in the
ADC, the calculated raw threshold should be adjusted based on the ADC
specifications for the device. These specifications include the integral
nonlinearity (INL), offset, and gain error. To adjust the high
threshold, use the following equation:
(calibrated value + INL) * Gain error + offset = maximum value [1]
Likewise, use the following equation for the low threshold:
(calibrated value - INL) * Gain error - offset = minimum value
The gain error is a combination of gain error, as listed in the
datasheet, and gain error drift due to temperature and supply. The exact
values for these specifications vary between palmas devices. This patch
sets the values found in TWL6035, TWL6037 datasheet.
[1] TI Application Report, SLIA087A, Guide to Using the GPADC in
TPS65903x, TPS65917-Q1, TPS65919-Q1, and TPS65916 Devices.
Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
Link: https://lore.kernel.org/r/20230408114825.824505-9-risca@dalakolonin.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of having high_threshold > 0 as an indicator for upper threshold
event and lower threshold event otherwise, use enum iio_event_direction
instead. This is hopefully less ambiguous.
Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
Link: https://lore.kernel.org/r/20230408114825.824505-6-risca@dalakolonin.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The palmas gpadc block has support for monitoring up to 2 ADC channels
and issue an interrupt if they reach past a set threshold. This is
currently used to wake up the system from sleep, but the functionality
is more generic than that. As such, change the naming of functions and
variables to refer to it as events instead, except during suspend and
resume where wakeup still make sense.
Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
Link: https://lore.kernel.org/r/20230408114825.824505-5-risca@dalakolonin.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
It does not seem to be used by anyone and later patches in this series
are made simpler by first removing this. There is now a lot of dead code
that cannot be reached, until later patches revive it. Arguably, this is
preferred over removing the code only to add it again.
Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
Link: https://lore.kernel.org/r/20230408114825.824505-4-risca@dalakolonin.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
DSDT ROTM method seen in the wild with SMO8B30 _HID.
Making assumption it is similar to that used for bmc150 plus
information from Darrell that the rotation is out by 90 degrees at boot.
Method (ROTM, 0, NotSerialized)
{
Name (RBUF, Package (0x03)
{
"0 -1 0",
"1 0 0",
"0 0 1"
})
Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_.ROTM.RBUF */
}
Reported-by: Darrell Kavanagh <darrell.kavanagh@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Darrell Kavanagh <darrell.kavanagh@gmail.org>
Link: https://lore.kernel.org/r/20230130201018.981024-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ID seen in the wild and it is a valid ST micro ID.
An offset of 1 for the device ID enum is needed when adding support for
retrieving the ID from device_get_match_data() to allow detection of
NULL pointer and fallback to i2c_device_id table.
DSDT chunk cropped for relevant parts.
Scope (_SB.PCI0.I2C5)
{
Device (DEV)
{
Name (_HID, EisaId ("SMO8B30")) // _HID: Hardware ID
Name (_CID, EisaId ("SMO8B30")) // _CID: Compatible ID
Name (_UID, Zero) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x006A, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.PCI0.I2C5",
0x00, ResourceConsumer, , Exclusive,
)
})
Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_._CRS.RBUF */
}
Method (ROTM, 0, NotSerialized)
{
Name (RBUF, Package (0x03)
{
"0 -1 0",
"1 0 0",
"0 0 1"
})
Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_.ROTM.RBUF */
}
...
Link: https://lore.kernel.org/all/20230129182441.082f29d0@jic23-huawei/
Reported-by: Darrell Kavanagh <darrell.kavanagh@gmail.com>
Tested-by: Darrell Kavanagh <darrell.kavanagh@gmail.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230130201018.981024-2-jic23@kernel.org
